August Premier Firearms Auction Day 1

Lot: 1 - Antique Winchester Second Model 1873 Lever Action Rifle

Exceptional Antique Winchester Second Model 1873 Lever Action Rifle in .44-40 W.C.F. with Factory Letter Manufactured in 1881, this exceptionally fine rifle has the second model receiver, with dust cover guide retained with two screws and dust cover with gripping serrations at the rear. The Model 1873 is often cited as one of the "guns that won the West", and thus many of these earlier production, standard configuration, "working" guns saw hard use on the unforgiving Western Frontier, making high condition examples such as this one very rare. The '73 found widespread popularity in the American West due in part to sharing many calibers with Colt's legendary "Peacemaker", allowing one to carry a longarm and a sidearm that both used the same ammunition. The included factory letter lists the rifle with a octagon barrel and plain trigger when received at the warehouse on 11 April 1881, and shipped on 13 July 1881 in order number 26697. The top of the barrel has the standard Winchester address and King's patent marking. The rifle correctly lacks caliber markings as the Model 1873 was initially only offered in .44 W.C.F. and it was considered standard. The model designation is marked on the upper tang, and the serial number is on the lower tang. It is fitted with a set of "sporting" sights including a No. 21 German silver blade front and an elevation adjustable No. 22 notch rear sight. It is mounted with a smooth forearm and straight grip stock with a trapdoor crescent buttplate. Manufacturer: Winchester Model: 1873 BBL: 24 inch octagon Stock: walnut Gauge: 44-40 WCF Finish: blue Serial Number69508 Class: Antique

Lot: 2 - First Year Production Winchester Model 1892 Lever Action Rifle

Highly Desirable First Year Production Three-Digit Serial Number 330 Antique Winchester Model 1892 Lever Action Rifle in .44-40 W.C.F. Manufactured in 1892, the first year of production, this is a highly desirable example of a very early Winchester Model 1892 rifle with just a three-digit serial number. The Model 1892 was the second of John Moses Browning's lever action rifle designs for the Winchester company, and it was intended to be a modernized, stronger replacement for the prolific but dated Model 1873. Like their predecessors, the Model 1892 paired perfectly with a Colt Single Action Army revolver, making for an excellent duo in the American West. These early production Model 1892s often saw years of use in the harsh environment of the West, well into the 20th century, leaving few surviving examples available to collectors today. This rifle, made so early in the first year of production, stands as a historic example of the rugged and dependable nature of these guns, representing a true American legend. The top of the barrel is marked with the two-line address and the caliber marking at the breech. The upper tang has the three-line model and trademark information, while the early production three-digit serial number is on the bottom of the receiver. It is fitted with a German silver No. 21 blade front sight and an elevation adjustable No. 24 notch rear sight. It is mounted with a smooth forearm and straight grip stock, both very nicely figured, with a crescent buttplate. Manufacturer: Winchester Model: 1892 BBL: 24 inch octagon Stock: walnut Gauge: 44-40 WCF Finish: blue Serial Number330 Class: Antique

Lot: 3 - Winchester Model 1866 Lever Action Saddle Ring Carbine

Desirable Winchester Model 1866 Lever Action Saddle Ring Carbine Manufactured in 1870, this is an attractive example of the Winchester Model 1866 saddle ring carbine. Many legendary firearms are often cited as the "guns that won the West;" however, there are perhaps no long guns more recognizable than the Winchester Model 1866 carbine. These saddle ring carbines simply have "the look" of having been there when the West was being tamed and were carried for decades on the frontier by lawmen, cowboys, outlaws, Native Americans, gold prospectors, and settlers. These Winchester "Yellowboys" are not only a tangible piece of "Wild West" history but have truly become a piece of Americana as one of the iconic firearms of the period of Manifest Destiny. This example is a Third Model, with the serial number marked in block digits behind the trigger on the lower tang. The standard two-line address and King's patent marking is on top of the barrel. It is fitted with a blade front sight, integral to the barrel band, a folding two-leaf rear sight, as well as a saddle ring on the left of the receiver. It is mounted with a smooth forearm and straight grip stock with a trapdoor crescent buttplate. Manufacturer: Winchester Model: 1866 BBL: 20 inch round Stock: walnut Gauge: 44 Henry Rimfire Finish: blue/brass Serial Number47938 Class: Antique

Lot: 4 - Winchester Model 1892 Lever Action Saddle Ring Carbine

Winchester Model 1892 Lever Action Saddle Ring Carbine with Factory Letter Manufactured in 1904, this is an attractive example of the Winchester Model 1892 saddle ring carbine. The included factory letter lists this carbine in 38 caliber when received at the warehouse on 10 August 1904 and shipped the following day. From their introduction as an updated replacement to the legendary Model 1873, these '92 rifles and carbines were immensely popular in the American West. Much like their predecessors, the Model 1892s found widespread popularity due to sharing many calibers with the iconic Colt Single Action Army revolver, with both guns remaining in widespread use in more wild parts of the West by ranchers, farmers, and lawmen well into the 20th century. These guns often spent many hard years as working guns in a harsh environment, making high condition examples like this one quite scarce. It has standard Winchester markings. It is fitted with a pinned blade front sight, folding ladder rear sight, and a saddle ring on the left of the receiver. It is mounted with a smooth forearm and straight grip stock with a carbine buttplate. Manufacturer: Winchester Model: 1892 BBL: 20 inch round Stock: hardwood Gauge: 38-40 WCF Finish: blue Serial Number255648 Class: Curio & Relic Long Gun

Lot: 5 - Rare Early Winchester "1884" Cartridge Display Board

Extremely Rare and Desirable Early Winchester "1884" Cartridge Display Board Produced in the early to mid-1880s, this is an extremely rare advertising piece for the Winchester Repeating Arms Co. Cartridge boards such as this one were produced by the company and provided to retailers throughout the country as an eye-catching piece to exhibit the plethora of ammunition the company produced, as well as to get potential customers thinking about the wide range of firearms the company manufactured. These bullet boards would have been displayed in a wide range of retailers including sporting goods stores and hardware stores, with thought rarely being given to their potential value to collectors down the road. This has left an extreme few surviving examples available today, leaving them extremely collectible in essentially any condition. This is an early cartridge board issued by Winchester (collectors refer to it as the Model 1884). It is the first to use what will later become the "classic" design of green lithograph paper with the bullet information in gold print and the Winchester shells mounted directly to the board. The cartridges are in an inverted "V" with cartridges in an arch on each side, a circle of cartridges in the middle, and shotgun shells and six cap tins on the lower portion. The display is mounted in the original interior frame which is finished in gold (the outer frame is absent). It measures approximately 29 1/4 x 40 5/8 inches. There are two iron screw eyes added to the top of the rear framing. Manufacturer: None Model: None Class: Other

Lot: 6 - Iconic Winchester First Model 1873 "One of One Thousand" Rifle

Scarce, Iconic, and Exceptionally Fine, Well-Documented Antique Special Order Factory Engraved and Silver Banded Winchester First Model 1873 "One of One Thousand" Lever Action Rifle, the Cover Gun of "Winchester: The Golden Age of American Gunmaking and the Winchester 1 of 1000" by Wilson Manufactured in 1876, the same year as the centennial celebrations of the United States of America, this is an

Lot: 7 - Special Order Winchester Second Model 1876 Lever Action Rifle

Outstanding Special Order Winchester "Centennial" Model 1876 Lever Action Rifle with Desirable Casehardened Receiver and Factory Letter The Winchester Model 1876 Rifle made its public debut in 1876 at the Philadelphia Centennial Exposition where it garnered the title "The Centennial Model" in honor of the Revolutionary War. By all accounts the Model 1876 was "a revolutionary gun," as legendary Winchester expert George Madis pointed out. Originally chambered in only .45-75 WCF cartridge, the Model 1876 offered a larger caliber for customers, particularly those out West, who believed .44-40 WCF lacked the stopping power for whatever came their way. With only 63,871 rifles and carbines manufactured between 1876 and 1897 surviving examples of the Centennial rifle are scarce, especially those in high condition. The Model 1876 was a "working man's gun" and thus surviving examples display all the character of hard use. This example, however, remains in excellent condition, worthy of the finest public or private collection. The rifle was manufactured in 1881, when a powerful rifle would have still been highly valued on the wild Western frontier. It has special order casehardened, later Second Model receiver with the dust cover guide retained with two screws and a dust cover with grip serrations at the rear. The included factory letter lists the rifle in .45-60 caliber with a round barrel, plain trigger, and casehardened finish when received at the warehouse on 3 August 1881 and shipped on 6 August 1881 to order number 27082. Winchester expert George Madis notes that only one out of every nine Model 1876s received a casehardened finish. It has a round barrel which was very scarce in this model, Madis noting that approximately 2/3 of Model 1876s produced had an octagon barrel. The top of the barrel is marked with the two-line address and King's patent marking ahead of the rear sight, with the caliber marking at the breech ("CAL. 45-60"). The caliber marking is repeated on the bottom of the cartridge elevator: "45-60." The model designation is marked on the upper tang, and the serial number is marked on the lower tang. The left side of the lower tang is marked "1156CF", with the assembly number "1156" repeated in the stock inlet along with the letter "P", as well as inside the buttplate. It is fitted with a German silver blade front sight and a folding ladder rear sight which is marked "1876". It is mounted with a nicely figured, smooth forearm and straight grip oil finish stock with a trapdoor crescent buttplate containing an included four-piece cleaning rod. This slightly higher than standard grade wood was typically chosen by Winchester for rifles ordered with "standard" wood but other special order features. Manufacturer: Winchester Model: 1876 BBL: 28 inch round Stock: walnut Gauge: 45-60 WCF Finish: blue/casehardened Serial Number14488 Class: Antique

Lot: 8 - Serial Number 758 "Open Top" Winchester Model 1876 Rifle

Outstanding, Exceptional, and Highly Desirable Documented First Year Production, Three-Digit Serial Number 758, "Open Top" Frame Special Order Winchester First Model 1876 "Centennial" Lever Action Rifle with George H. Daw & Co. British Retailer Mark and Factory Letter Manufactured in 1876, the first year of production, this is an outstanding and very scarce "open-top frame" example of

Lot: 9 - Stunning Colt Single Action Army in .41 with Rare Picture Box

Stunning and Well-Documented Antique Colt Single Action Army Revolver in .41 Long Colt with Extremely Rare Original Picture Box and Factory Letter This is a stunning high condition 1894 production Colt Single Action Army revolver in .41 Long Colt with its original factory picture box; by far one of the rarest Colt Single Action Army accessories encountered today. The revolver and its rare original box are featured on page 135 of "Fine & Historic Arms Annual" by the Texas Gun Collectors Association and Rock Island Auction Company as part of the Dr. Paul and Carla McCombs Collection. The accompanying factory letter lists this revolver as shipped on May 29, 1894, to Simmons Hardware Co. in St. Louis, Missouri, in .41 caliber with a 5 1/2 inch barrel, blue finish, and type of grips not listed, as part of 9 guns of the same type in the shipment. Single Action Army revolvers like this one were more often than not seen as working guns and typically worn regularly as a holstered sidearm well into the 20th century, leaving very few surviving examples in incredibly high condition like this one available to collectors. Among standard Colt First Generation Single Action Army revolvers, only 16,402 left the factory chambered for .41 Long Colt compared to 150,683 in .45 Long Colt making it comparably scarce per the figures from factory ledger records on page 252 of "The Book of Colt Firearms" by R.L. Wilson. Of those surviving .41 Long Colt chambered Single Action Army revolvers, this 1894 production example is far above nearly all of them in condition. The top of the barrel is marked with the one-line Colt Hartford address and "41 COLT." is on the left. The left of the frame has the two-line patent date markings and circled Rampant Colt. It has a blade front sight and frame-top groove rear sight, with a set of checkered hard rubber grips with Rampant Colt logos. Matching visible full serial numbers are marked on the bottom of the frame, trigger guard, and butt, matching partial "6576" is correctly hand etched on the interiors of both grips, correctly unnumbered cylinder, and assembly number "121" is on the loading gate. Included with the revolver is the extremely rare original Colt picture box with the matching serial number correctly handwritten on bottom and the period handwritten name Mrs. B.W. Foltz above a Fort Collins, Colorado, address as well as partly legible period handwriting including a Judge Hawes, retaining a nearly complete top label with an illustrated Rampant Colt and Single Action Army revolver, a complete end label confirming the configuration of the revolver, and an advertisement for Colt's Ideal reloading implements is inside the lid. Manufacturer: Colt Model: Single Action Army BBL: 5 1/2 inch round Gauge: 41 Long Colt Finish: blue/casehardened Grips: hard rubber Serial Number156576 Class: Antique

Lot: 10 - Benchmark Colt Sheriff's Model Single Action Army Revolver

Magnificent Benchmark Antique Colt Sheriff's Model Single Action Army Revolver with Factory Letter We are honored to present this drop dead gorgeous original 1887 production nickel plated antique Colt Sheriff's Model Single Action Army revolver. The accompanying factory letter lists this revolver as the sole gun of its type in a later dated shipment on May 12, 1892, to John P. Lovell Arms Company in Boston, Massachusetts, in .45 caliber with a 4 inch barrel, nickel finish, and type of grips not listed. The revolver is wearing a correct set of unnumbered factory checkered hard rubber grips with Rampant Colts and patriotic eagles. This is one of only 37 recorded in factory ledgers in this specific configuration with a 4 inch barrel and nickel finish out of only 224 total non-engraved Sheriff's Model revolvers in .45 Long Colt in the 1-164100 serial range per page 326 of "The Official Record of the Colt Single Action Army Revolver, 1873-1895" by the Wilkersons and Hoyt. Just under 600 ejectorless Sheriff's Model Single Action Army revolvers total were produced in all calibers between 1882 to the 1930s, making them among the rarest and most sought after variations of the legendary Peacemaker. The Sheriff's Model was popular with civilians, settlers, lawmen, outlaws, miners, cowboys, and shopkeepers, and while there were certainly many other options for sidearms available to those on the frontier, there is little question that the Single Action Army was the most widely desired and most prevalent. These ejectorless Sheriff's Models were a variation offering a lighter, quicker handling, and more concealable version of the "Peacemaker," making it a logical choice for some lawmen and also shopkeepers. Whether on the hip of a lawman, carried by an outlaw or under the counter of a storekeeper's shop, the Sheriff's Model was at the front lines of the American frontier. Just like the other variations of the Single Action Army, these Sheriff's Models forged their legacy in the turbulence and struggle of the American West, often seeing many years of hard use in the harsh environment of the frontier, leaving surviving examples in any condition quite limited. These were considered working guns. This example, however, shows little to no evidence of having been used, making it an incredible rarity today and serving as a true time capsule. The top of the barrel is marked with the two-line Colt Hartford address and a small "S" is marked on bottom. "45 CAL" is marked on the left of the trigger guard. The matching visible serial number is marked on the bottom of the frame, trigger guard and butt, unnumbered cylinder marked with a small "G" on the rear, and assembly number "421" is on the loading gate. Manufacturer: Colt Model: Single Action Army BBL: 4 inch round Gauge: 45 Long Colt Finish: nickel Grips: hard rubber Serial Number123289 Class: Antique

Lot: 11 - Factory Engraved Nickel Winchester Deluxe Model 1873 Rifle

Attractive and Highly Desirable Antique Ulrich Factory Panel Scene Engraved Special Order Nickel Plated Winchester Deluxe Second Model 1873 Lever Action Rifle in .44-40 W.C.F. with Factory Letter Manufactured in 1879, this is a highly attractive and desirable example of a special ordered, Ulrich factory engraved, nickel plated, deluxe Winchester Model 1873 rifle. This particular rifle was almost

Lot: 12 - Special Order Winchester Deluxe Model 1876 Rifle in .50-95 Ex.

Highly Desirable Special Order Winchester Deluxe Model 1876 "Centennial" Lever Action Rifle in Documented .50-95 Express with Factory Letter Manufactured in 1881, this is solid example of a special ordered deluxe variation of Winchester's iconic "Centennial" rifle, the Model 1876, chambered in the ever-desirable .50-95 Express. The included factory letter lists the rifle in "Express caliber", casehardened finish, round barrel, plain trigger, half magazine, and a checkered pistol grip stock with a shotgun butt when received at the warehouse on 29 October 1881 and shipped on 30 October 1881 to order no. 27420. These Model 1876 rifles were marketed as the heavier hitting big brother of the legendary Winchester Model 1873, and an 1876 chambered in .50-95 Express was certainly the hardest hitting of the bunch. According to Winchester historian and author George Madis, out of the 63,871 total Model 1876s produced, one out of every nine rifles was casehardened, one of every 250 had a special length magazine, one out of every 420 had a pistol grip stock, one of every 540 had a special buttplate, and one of every 630 had checkered wood, making this particular rifle quite scarce, especially considering its caliber. This example has the Second Model receiver with the dust cover guide attached with two screws and dust cover with grip serrations at the rear and the Winchester Express caliber marking on top. The top of the barrel is marked with the standard two-line address, and the caliber marking is on the breech and repeated on the bottom of the cartridge elevator. The upper tang has the model designation, and the serial number is marked on the lower tang, correctly perpendicular to the line of the rifle. The left side of the lower tang is marked "XX S 179", with "179" repeated in the stock inlet, and the inside of the buttplate marked "59". It is fitted with a No. 21 German silver blade front sight, an elevation adjustable No. 22 notch rear sight, and a pair of period installed sling swivels on the forearm cap and the bottom of the stock. It is mounted with a nicely figured forearm and pistol grip stock, both with factory H-pattern checkering, a horn insert in the base of the grip, and a smooth steel shotgun buttplate. Manufacturer: Winchester Model: 1876 BBL: 26 inch round Stock: walnut Gauge: 50-95 Express Finish: blue/casehardened Serial Number16731 Class: Antique

Lot: 13 - Antique Winchester Model 1873 Lever Action Rifle in .38 W.C.F.

Outstanding Antique Winchester Model 1873 Lever Action Rifle in .38 W.C.F. Manufactured in 1891, this is an outstanding example of "the gun that won the West". In regards to the American West, and perhaps America in general, there are few more iconic duos than the Winchester Model 1873 and the Colt Single Action Army revolver. Sharing many common calibers such as .38 W.C.F., these two guns were easily paired as a primary weapon and sidearm using the same ammunition. These legendary firearms were forged in the industrialized fires of the overcrowded, smog-choked urban centers of the east by tough-as-nails Americans working long hours in the sprawling factories. Many of these guns, as tough as the people that built them, ended up in the hands of others who turned their gaze westward, intending to chase the wild horizon ever farther, in search of opportunity and freedom. Much like the guns they carried, these people heading westward were hardened, forged in the fires of the frontier, where failure could mean a small unmarked grave along the side of the trail. Those people who ventured into the untamed wilds of the west became indelibly linked with the unbreakable American spirit, and there is perhaps no tangible item that evokes this spirit on a visceral level more than a Winchester Model 1873 rifle like this one. Made when much of the American West remained wild, this standard configuration Model 1873 has remained in incredible condition for 134 years, especially considering the majority of these standard rifles were viewed as tools, seeing hard working lives. It has the Third Model receiver with the integral dust cover guide and dust cover with grip serrations at the rear. The top of the barrel is marked with the typical two-line address and King's patent marking, as well as the caliber marking at the breech, which is repeated on the bottom of the cartridge elevator. The upper tang has the model marking, and the serial number is marked on the lower tang. It is fitted with a No. 21 German silver blade front sight and an elevation adjustable No. 24 notch rear sight. It is mounted with a smooth forearm and straight grip stock with a trapdoor crescent buttplate containing an included four-piece cleaning rod. Manufacturer: Winchester Model: 1873 BBL: 24 inch octagon Stock: walnut Gauge: 38-40 WCF Finish: blue Serial Number403995B Class: Antique

Lot: 14 - Special Order Winchester Model 1886 Lever Action Rifle

Attractive Antique Special Order Winchester Model 1886 Lever Action Rifle in Highly Desirable .45-90 W.C.F. with Factory Letter Manufactured in 1889, this is an attractively configured special ordered example of Winchester's Model 1886 rifle, designed by the legendary John Browning, and chambered in the powerful .45-90 W.C.F. The included factory letter lists the rifle in .45-90 caliber with a part octagon barrel, plain trigger, half magazine, and "Lyman peep and beach" sights when received at the warehouse on 1 August 1889 and shipped the following day to order no. 24629. These rifles found widespread popularity in the American West, where they were highly regarded for their robust and dependable nature and hard-hitting power. It was also a favorite of professional hunters, particularly in the most powerful calibers such as .45-90 W.C.F., which was more than capable of downing essentially any large game in North America, as well as most other continents. This rifle has the attractive casehardened receiver that was standard on the model until around 1901. The top flat of the barrel has the two-line address and the caliber marking at the breech, while the model marking is on the upper tang, and the patent dates and serial number are on the lower tang. It is fitted with a Beach type combination front sight, an elevation adjustable No. 24 notch rear sight, and a Lyman combination peep sight mounted on the upper tang. It is mounted with a lightly figured forearm and straight grip stock with a crescent buttplate. Manufacturer: Winchester Model: 1886 BBL: 26 inch part octagon Stock: walnut Gauge: 45-90 Winchester Finish: blue/casehardened Serial Number32305 Class: Antique

Lot: 15 - Winchester Model 1894 Lever Action Rifle in .38-55 W.C.F.

Winchester Model 1894 Lever Action Rifle in Highly Desirable .38-55 W.C.F. Manufactured in 1912, this is a fine example of the legendary, John Moses Browning designed Winchester Model 1894 rifle in the ever-desirable .38-55 W.C.F. The Model 1894 was the most prolific of Winchester's lever actions, with more than 7,500,000 having been produced. About one quarter of the Model 1894 production up to around serial number 353,999 was chambered in .38-55 W.C.F. like this example, and it remains a popular caliber among collectors to this day. These Model 1894s, particularly standard configuration guns, were seen as utility guns and often saw hard use in the harsh environment of the American West well into the 20th century, leaving very few examples in high condition like this one. There are Winchester factory oval proofs on top of the barrel and receiver at the breech. The upper left of the barrel is marked with the standard two-line address and the caliber marking at the breech. The upper tang has the three-line model and trademark information, while the serial number is marked on the bottom of the receiver. It is fitted with a blued blade front sight, an elevation adjustable low-profile notch rear sight, and a peep sight on the upper tang. It is mounted with a smooth forearm and straight grip stock with a crescent buttplate. Manufacturer: Winchester Model: 1894 BBL: 26 inch round Stock: walnut Gauge: 38-55 WCF Finish: blue Serial Number569093 Class: Curio & Relic Long Gun

Lot: 16 - Antique Special Order Winchester Model 1892 Lever Action Rifle

Rare Antique Special Order Winchester Model 1892 Lever Action Rifle with Factory Letter Per the Madis serial number data published by Winchester, this rifle is legally an antique. The Winchester Collectors Association indicates that the rifle was manufactured in 1901. The included factory letter lists this rifle in .38 caliber with a half octagon barrel, plain trigger, half magazine, and Lyman front and receiver sights when received at the warehouse on 11 April 1901 and shipped on 12 April 1901. Often viewed as a working gun, these 1892s are fairly uncommon with any special order features like this example has, making them significantly more desirable among collectors. The rifle has standard Winchester markings. It is fitted with a Lyman combination front sight, a filler in the rear sight dovetail, and a Lyman peep sight mounted on the left of the receiver. It is mounted with a smooth forearm and straight grip stock with a crescent buttplate. Manufacturer: Winchester Model: 1892 BBL: 24 inch part octagon Stock: walnut Gauge: 38-40 WCF Finish: blue Serial Number162659 Class: Antique

Lot: 17 - Special Order Winchester Model 1886 Takedown Rifle in .45-70

Special Order Winchester Model 1886 Lever Action Takedown Rifle in Highly Desirable .45-70 Government with Factory Letter Manufactured in 1907, this is an intriguing example of a special ordered Winchester Model 1886 rifle that has every appearance of having been meticulously configured by a discerning customer whose priority was functionality, likely as a big game hunting rifle. The included factory letter lists the rifle in .45-70 caliber with a 24 inch round nickel steel barrel, plain trigger, sights as "Lyman hunting front with gold bead and flat-top sporting rear notch slightly rounded", "WHV", takedown, and a rubber shotgun butt when received at the warehouse on 14 September 1908, shipped on 5 September 1908 to order no. 168541 (as listed in the ledger), and repaired and returned on 23 September 1909 to order no. 26006. It has the standard Winchester markings including factory oval proofs on the standard weight profile barrel and the receiver at the breech. It is fitted with a tall Lyman "Hunting" blade front sight with gold bead, a low elevation adjustable slightly rounded flat-topped "Sporting" notch rear sight, and a peep sight mounted on the upper tang. It is likely that the "WHV" (Winchester High Velocity) in the factory letter is in reference to the special sights as "nickel steel" is also listed in the letter, which typically warranted the Winchester High Velocity designation for modern smokeless powder. The rifle is in takedown configuration. It is mounted with a smooth forearm and straight grip stock with the larger internal hollow typically seen on "extra lightweight" rifles, as well as a checkered hard rubber buttplate. Manufacturer: Winchester Model: 1886 BBL: 24 inch round Stock: walnut Gauge: 45-70 Government Finish: blue Serial Number143637 Class: Curio & Relic Long Gun

Lot: 18 - Winchester Model 1892 Lever Action Rifle

Winchester Model 1892 Lever Action Rifle Manufactured in 1908. This rifle has standard Winchester markings including factory oval proofs on the barrel and receiver at the breech. It is import marked on the receiver. It is fitted with a No. 21 German silver blade front sight, an elevation adjustable No. 24 notch rear sight, and a combination peep sight mounted on the upper tang. It is mounted with a smooth forearm and straight grip stock with a crescent buttplate. Manufacturer: Winchester Model: 1892 BBL: 24 inch round Stock: walnut Gauge: 32-20 WCF Finish: blue Serial Number438056 Class: Curio & Relic Long Gun

Lot: 19 - Special Order Winchester Model 1892 Lever Action Rifle

Special Order Winchester Model 1892 Lever Action Rifle Manufactured in 1909, this is a very fine example of a special ordered Winchester Model 1892 rifle. Being an updated and strengthened version of the iconic Model 1873, these 92s often saw extensive service in the American West well into the 20th century. This example has Winchester factory oval proofs on the barrel and receiver at the breech as well as standard markings throughout. It is fitted with a No. 21 German silver blade front sight and an elevation adjustable No. 24 notch rear sight. It is mounted with a smooth forearm and straight grip stock with a special ordered checkered steel shotgun buttplate. Manufacturer: Winchester Model: 1892 BBL: 24 inch octagon Stock: walnut Gauge: 38-40 WCF Finish: blue Serial Number478005 Class: Curio & Relic Long Gun

Lot: 20 - Antique Winchester Model 1886 Lever Action Rifle

Antique Winchester Model 1886 Lever Action Rifle Manufactured in 1891, this is a representative example of a Winchester Model 1886. The John Browning designed '86 was not Winchester's first entry into the "big bore" lever action game, that title is held by the Model 1876 with its toggle-link action. It was however the first rifle they produced that was strong enough to handle cartridges of immense power, due to its locking-block action with two large, vertical locking lugs. These rifles were highly valued in the American West well into the 20th century for their firepower and rugged dependability. This example has the attractive casehardened receiver, which was standard on the Model 1886 until around 1902. The top of the barrel is marked with the two-line Winchester address on the top barrel flat and the caliber marking at the breech. The top of the upper tang has the model marking, and the lower tang is marked with the two-line patent dates as well as the serial number. It is fitted with a No. 21 German silver blade front sight and an elevation adjustable notch No. 24 rear sight. It is mounted with a smooth forearm and straight grip stock with a crescent buttplate. Manufacturer: Winchester Model: 1886 BBL: 26 inch octagon Stock: walnut Gauge: 40-65 Winchester Finish: blue/casehardened Serial Number62417 Class: Antique

Lot: 21 - Savage Model 1899H Featherweight Lever Action Takedown Carbine

Exceptional Savage Model 1899H Featherweight Lever Action Takedown Carbine with Factory Letter Manufactured in 1915, this is an exceptionally fine example of the Savage Model 1899H Featherweight takedown carbine. The included factory letter lists the carbine in .303 Savage caliber with a 20 inch barrel when accepted at the warehouse on 17 April 1915 and shipped on 9 December 1915 to Mr. H.E.A. Mondemay. The barrel has the standard Savage markings and the serial number is on the bottom rear of the receiver. It is fitted with a pinned beaded German silver blade front sight and an elevation adjustable notch rear sight. It is mounted with a smooth Schnabel tip forearm and straight grip stock with a checkered hard rubber shotgun buttplate. Manufacturer: Savage Arms Corporation Model: 1899 H-Rifle BBL: 20 inch round Stock: walnut Gauge: 303 Savage Finish: blue Serial Number168194 Class: Curio & Relic Long Gun

Lot: 22 - Factory Engraved Marlin Deluxe Model 1891 Lever Action Rifle

Factory Engraved Marlin Deluxe Model 1891 Lever Action Rifle Manufactured in 1891. The desirable "side loader" receiver features highly attractive English style floral scrollwork along with scroll borders and a circular bordered stag scene on the left side. It is similar to examples documented in Brophy's "Marlin Firearms" which are listed as factory engraved. Scrollwork flanks the "MARLIN SAFETY" receiver marking at the top and bottom. The special order part octagon barrel has blade front and fixed notch rear sights, and the legend ending with the 1890 patent date. The correctly unmarked upper tang is mounted with a peep sight. The highly figured forearm and pistol grip stock feature multi-point checkering and a Marlin hard rubber buttplate. Manufacturer: Marlin Firearms Co Model: 1891 BBL: 24 inch part octagon Stock: walnut Gauge: 22 RF Finish: casehardened/blue Serial Number55097 Class: Antique

Lot: 23 - Antique Special Order Marlin Model 1881 Lever Action Short Rifle

Antique Special Order Marlin Model 1881 Lever Action Short Rifle in Desirable .38-55 W.C.F. Manufactured in 1886, this is a solid example of the powerful Marlin Model 1881 rifle. This rifle was made the same year Winchester finally delivered their response to Marlin's 1881 in the John Browning designed Model 1886. These rifles were popular in the American west, giving one the firepower necessary to handle essentially any threat they might face. This particular example was special ordered with a 24 inch barrel, of which only 2,788 were produced according to William Brophy in "Marlin Firearms". The top of the barrel has the two-line Marlin address and patent dates, as well as the caliber marking at the breech. The serial number is marked on the bottom of the receiver. It is fitted with a Marble No. 3 beaded blade front sight, an elevation adjustable notch rear sight, and a peep sight on the upper tang. It is mounted with a smooth forearm and straight grip stock with a crescent buttplate. Manufacturer: Marlin Firearms Co Model: 1881 BBL: 24 inch octagon Stock: walnut Gauge: 38-55 WCF Finish: blue Serial Number14791 Class: Antique

Lot: 24 - Desirable Special Order Marlin Model 93 Lever Action Short Rifle

Desirable Special Order Marlin Model 93 Lever Action Short Rifle Manufactured c. 1930, this is a desirable example of Marlin's 20th century workhorse, the Model 93. The Model 1893, or Model 93 as Marlin began calling it around 1920, was part of a triple threat in their lineup, which featured three virtually identical rifle models, one for mid sized rifle calibers, one for pistol calibers, and one for large rifle calibers, these being the Model 1893, 1894, and 1895 respectively. The special ordered part octagon barrel is marked with the standard two-line address and patent dates, the caliber at the breech, and the Special Smokeless Steel marking on the upper left. The top of the receiver has the Marlin Safety marking, model designation on the upper tang, and the serial number on the lower tang. It is fitted with a "Rocky Mountain" type German silver blade front sight and an elevation adjustable notch rear sight. It is mounted with a smooth forearm and straight grip stock with a curved buttplate. Manufacturer: Marlin Firearms Co Model: 93 BBL: 20 inch part octagon Stock: walnut Gauge: 30-30 WCF Finish: blue/casehardened Serial NumberA1563 Class: Curio & Relic Long Gun

Lot: 25 - Exceptional Antique Winchester Model 1873 Lever Action Rifle

Exceptional Antique Winchester Model 1873 Lever Action Rifle Manufactured in 1884, this is an exceptional example of Winchester's iconic Model 1873 rifle, "the gun that won the West". These Model 1873s made their way to the western frontier in large numbers with many seeing extensive use, particularly those in standard configurations, leaving limited high condition examples like this one available to today's collectors. It has the Third Model receiver with the integral dust cover guide and dust cover with grip serrations at the rear. The top of the barrel is marked with the two-line address and King's patent marking, while the caliber marking is at the breech and repeated on the bottom of the cartridge elevator. The model marking is on the upper tang and the serial number is on the lower tang. It is fitted with a No. 21 German silver blade front sight and an elevation adjustable No. 22 notch rear sight, which was shortened during the period of use. The muzzle of the barrel is counterbored. It is mounted with a smooth forearm and straight grip stock with a crescent buttplate. Manufacturer: Winchester Model: 1873 BBL: 24 inch round Stock: walnut Gauge: 32 WCF Finish: blue Serial Number146218A Class: Antique

Lot: 26 - Browning Bros. Marked Winchester Model 1894 Rifle

Highly Desirable Browning Bros. Ogden, Utah, Retailer Marked Winchester Model 1894 Lever Action Rifle Manufactured in 1907, this is a highly attractive example of the iconic Winchester Model 1894 rifle bearing the highly desirable Browning Bros., Ogden, Utah, retailer marking. In around 1878, John Moses Browning and his brothers took over their father's gun shop in Ogden, establishing the Browning Bros. firm. John Browning was a legendary American firearms designer that made many of Winchester's most popular designs, including the Model 1886, Model 1892, and Model 1894 like this rifle. It is known that part of Browning's agreements with Winchester to let them produce his designs was them providing him with stock for his family's shop, with this rifle being one of those provided. These Browning Bros. marked Winchesters have the added desirability of being associated with the legendary John Browning, but also as being shipped to and used in the American West, much of which remained relatively untamed well into the 20th century. There are Winchester factory oval proofs on the barrel and receiver at the breech. The top barrel flat is marked with the standard two-line address, the "BROWNING BROS.CO.OGDEN.U" marking, and the caliber marking at the breech. The nickel steel marking is on the upper left flat. The upper tang is marked with the three-line model and trademark information, while the serial number is on the bottom of the receiver. It is fitted with a No. 21 German silver blade front sight, a period fitted blank in the rear sight dovetail with original factory sight index marks visible, and a Marble peep sight mounted on the upper tang. It is mounted with a smooth forearm and straight grip stock with a crescent buttplate. Manufacturer: Winchester Model: 1894 BBL: 26 inch octagon Stock: walnut Gauge: 30-30 WCF Finish: blue Serial Number348938 Class: Curio & Relic Long Gun

Lot: 27 - Union Metallic Cartridge Co. Cartridge Display Bullet Board

Highly Desirable Framed Union Metallic Cartridge Co. Cartridge Display Bullet Board Manufactured c. the late 19th century, cartridge boards such as this were an excellent advertisement provided to hardware and sporting goods stores by cartridge manufacturers to hang in their shops, giving consumers a physical representation of the wide range of cartridges they produced. One of these boards is clearly shown hanging in the well-known photograph of the interior of J.P. Lower & Sons' shop in Denver, and other examples would have hung in other gun shops around the country as promotional items distributed by the Union Metallic Cartridge Co. in the late 19th century and into the early 20th century. These cartridge display boards naturally make eye-catching display pieces in gun rooms, gun shops, homes, and businesses. Being one of the largest American cartridge manufacturers, Union Metallic Cartridge Co. would have wanted boards such as this hanging in as many retail locations as possible to compete with the likes of Winchester and the United States Cartridge Co. This impressive board includes cartridges ranging from the tiny BB cap up to the massive 1 inch Gatling. Centered around a central diamond shaped image depicting a herd of multiple deer species and the "U.M.C." logo. A number of primers, caps, wads, and cut away brass shotgun shells join the myriad of rifle and revolver rounds. This example remains mounted in the original molded inner frame, which is painted silver. It measures 34 x 47 inches overall. Manufacturer: None Model: None Class: Other

Lot: 28 - Factory Engraved Gold Inlaid Winchester Deluxe Model 1894 Rifle

Scarce Documented Highly Optioned Factory Exhibition No. 4 Panel Scene Engraved and Gold Inlaid Antique Special Order Winchester Deluxe Model 1894 Extra Lightweight Lever Action Short Rifle with Beautiful Relief Carved Floral Scroll Stock and Factory Letter Manufactured in 1898, this is an extremely desirable, highly optioned, special order, factory No. 4 panel scene engraved, gold inlaid, deluxe

Lot: 29 - Engraved and Gold Inlaid Winchester Flatside Model 1895 Rifle

Highly Desirable Factory Exhibition Engraved and Gold Inlaid Antique Special Order Winchester Deluxe Flatside Model 1895 Lever Action Rifle with Extra Length Barrel and Factory Letter Manufactured in 1897, this is a highly attractive example of a documented factory exhibition engraved and gold inlaid special order Winchester deluxe Model 1895 rifle with scarce factory carved wood. This is one of

Lot: 30 - Antique Winchester Model 1886 Lever Action Rifle in .50 Express

Very Fine Antique Winchester Model 1886 Lever Action Rifle in Documented Highly Desirable .50 Express with Factory Letter Manufactured in 1894, this is an very fine example of Winchester's Model 1886 chambered in the most powerful big bore cartridge it was offered in. The included factory letter lists this rifle in .50 Express with an octagon barrel and plain trigger when received at the warehouse on 3 May 1899 and shipped on 11 July 1899 to order no. 31785. The .50-110 Express not only held a special place in the hearts of those on the frontier seeking a rifle that could stop anything but has also remained highly sought after among Winchester collectors. These "Big Fifties" had more than enough power to dispatch all large North American game as well as all but the most dangerous game in Africa, making them highly prized among big game hunters. Due to their popularity among frontier hunters, many of these big bore Winchesters did not survive or are seen in well-used condition, with very little finish remaining, with this particular rifle being an exception to that rule. The rifle has the attractive casehardened receiver which was standard on this model until around 1901. The top barrel flat is marked with the two-line address and the "50 EX." caliber marking at the breech. The upper tang has the model marking, and the lower tang is marked with the serial number. It is fitted with a No. 21 German silver blade front sight and a period shortened elevation adjustable No. 24 notch rear sight. It is mounted with a smooth forearm and attractively figured straight grain and straight gripped stock with a crescent buttplate. Manufacturer: Winchester Model: 1886 BBL: 26 inch octagon Stock: walnut Gauge: 50-110 Express Finish: blue/casehardened Serial Number92187 Class: Antique

Lot: 31 - Special Order Winchester Model 1894 Takedown Rifle

Excellent Special Order Winchester Model 1894 Lever Action Takedown Rifle with Factory Letter Manufactured in 1904, this is an excellent example of the iconic Winchester Model 1894 rifle in special order takedown configuration. The included factory letter lists the rifle in .30 caliber with an octagon barrel, plain trigger, and takedown when received at the warehouse on 20 June 1904 and shipped on 14 July 1904 to order no. 237660. The John Moses Browning designed Winchester Model 1894 rifle is one of the most widely produced sporting rifles of all time and remains an iconic piece of Americana associated with both the western frontier and the American sportsman. The top flat of the barrel is marked with the standard two-line address and the caliber marking at the breech, while the upper left has the two-line nickel steel marking. The upper tang has the three-line model and trademark information, while the serial number is on the bottom of the receiver. It is fitted with a No. 21 German silver blade front sight and a three-leaf "Winchester Express" rear sight. It is mounted with a smooth forearm and straight grip stock, both showing some nice figure, with a crescent buttplate. Manufacturer: Winchester Model: 1894 BBL: 26 inch octagon Stock: walnut Gauge: 30-30 WCF Finish: blue Serial Number222874 Class: Curio & Relic Long Gun

Lot: 32 - Antique Winchester Deluxe First Model 1873 Lever Action Rifle

Desirable Documented Early Production Hand-Inscribed Three-Digit Serial Number Antique Special Order Winchester Deluxe First Model 1873 Lever Action Rifle with Raised "Thumbprint" Dust Cover and Factory Letter Manufactured in 1874, just the second year of production for this legendary model, this is a solid example of the iconic Winchester Model 1873, which has come to be known as "the gun that won the West". These 1873s were widely used on the American frontier in a wide range of configurations, firmly establishing Winchester as the most prolific provider of longarms in the West. This particular model is in a highly desirable special ordered deluxe configuration and certainly has the look of a gun that has stories to tell. The included factory letter lists the rifle as having originally been configured with a 24 inch octagon barrel, set trigger, "Target 2-1/2", and an oil finished "XX" stock when received at the warehouse on 4 March 1874 and shipped on 6 March 1874 to order no. 1052. The letter further notes that it returned to the factory on 6 January 1881 and was fitted with the current half octagon barrel, half magazine, frame casehardened, "Winchester combination sights", as well as the stock refinished and checkered and a new fancy checkered forearm, before being returned to New York on the same day. This example has the First Model receiver with integral dust cover guides on either side of the ejection ports and the dust cover with the desirable raised "thumbprint" grip area. The top of the barrel has the standard two-line address and King's patent marking, and the rifle correctly lacks caliber markings as the only caliber initially offered was .44-40 W.C.F. The model marking is on the upper tang, while the early production hand-inscribed serial number "539" is on the lower tang. The left side of the lower tang is marked "A0257", with "257" repeated in the stock inlet (faint) and inside the buttplate. It is fitted with a long beaded blade front sight, an elevation adjustable notch rear sight (loose in the dovetail), a Winchester combination peep sight on the upper tang (aperture disc absent), and a single set trigger. It is mounted with a nicely figured forearm and straight grip stock, both with the early pattern factory deluxe checkering, sling swivels on the forearm cap and bottom of the stock, and a trapdoor crescent buttplate. Manufacturer: Winchester Model: 1873 BBL: 24 inch octagon Stock: walnut Gauge: 44-40 WCF Finish: blue/casehardened Serial Number539 Class: Antique

Lot: 33 - First Year Production Winchester Model 1892 Rifle in .44-40 WCF

Desirable First Year Production Antique Winchester Model 1892 Lever Action Rifle in .44-40 W.C.F. Manufactured in 1892, the first year of production, this is a highly desirable example of the John Browning designed Winchester Model 1892 rifle in the highly frontier-revered .44-40 W.C.F. The included Cody Firearms Museum research request lists the serial number applied on 28 November 1892, .44 caliber, octagon barrel, and plain trigger when received at the warehouse on 18 January 1893 and shipped on 23 August 1893 to order no. 23159. The top barrel flat has the standard two-line address and caliber marking at the breech. The upper tang has the three-line model, trademark, and patent information, while the serial number is on the bottom of the receiver. It is fitted with a No. 21 German silver blade front sight and an elevation adjustable notch No. 24 rear sight. It is mounted with a smooth forearm and straight grip stock with a crescent buttplate. Manufacturer: Winchester Model: 1892 BBL: 24 inch octagon Stock: walnut Gauge: 44-40 WCF Finish: blue Serial Number5006 Class: Antique

Lot: 34 - Ken Hunt Engraved Gold Inlaid Winchester Model 1876 Rifle

Extraordinary Exhibition Grade Masterpiece Ken C. Hunt Signed Master Panel Scene Engraved and Gold Inlaid Deluxe Winchester Second Model 1876 Lever Action Rifle with Documentation In the world of high art firearms from the 20th and 21st century there are a select few who stand head and shoulders above the rest, forming a pantheon of true masters of their craft and setting the standard by which all

Lot: 35 - Bob Swartley Game Scene Engraved Model 1878 Borchardt Rifle

Master Robert "Bob" Swartley Signed and Game Scene Engraved Sharps/Lloyd Chiswick Model 1878 Borchardt Single Shot Rifle with Case Built on a Sharps Model 1878 Borchardt rifle by renowned contemporary maker Lloyd Chiswick. The rifle is fitted with Freund patent of June 29, 1880, front and rear sights, "Old Reliable" and "SHARPS RIFLE Co. BRIDGEPORT, CONN." marked on the top flat ahead of the rear sight, along with "FREUND'S/PATENT/JUNE 26/1880/DURANGO/COLO" behind the rear sight. The barrel is fitted to the casehardened action which displays light scroll engraving at the borders with two game scenes depicting a pair of bison on the right and a single bison fighting off a pair of wolves on the left. The engraving is signed on the underside of the action "R. SWARTLEY" for highly regarded American Master Engraver Robert "Bob" Swartley. The upper tang is fitted with a long range folding ladder peep sight. The rifle is fitted with a beautifully figured California English walnut multi-point checkered forearm with horn tip and a Creedmoor style pistol grip stock with horn inlay in the grip, shadowline cheekpiece, and a checkered blued steel buttplate. Included with the rifle is a fitted oak takedown case with Freund & Bro. plaque on the lid, oiler, and cleaning tools, as well as a set of 50-140 Sharps dies. Manufacturer: Sharps Rifle Manufacturing Company Model: 1878 Borchardt BBL: 30 inch octagon Stock: walnut Gauge: 50-140 Finish: blue/casehardened Serial Number17603 Class: Antique

Lot: 36 - Engraved Marlin Ballard No. 6 Schuetzen Rifle with Round Barrel

Highly Desirable Special Order Factory Panel Scene Engraved Marlin Ballard No. 6 Schuetzen Single Shot Rifle with Extremely Scarce Round Barrel Manufactured c. 1881 to 1891, this is an exceptional example of the Marlin Ballard No. 6 Schuetzen rifle featuring beautiful factory panel scene engraving as well as an extremely scarce special ordered round profile barrel. These No. 6 Schuetzen rifles were one of the most celebrated competition rifles of the late 19th and early 20th century while the competitive shooting craze was at its absolute pinnacle. These rifles forged an iconic legacy on the competition ranges of the United States and around the world, remaining highly revered to this day. In "Ballard: The Great American Single Shot Rifle" by John Dutcher, it is stated that "In its day, the No. 6 was the last word in target rifles." The rarity of the special ordered round barrel on this example cannot be understated, as no other examples could be identified at the time of this writing, and the previously mentioned book does not make mention of it being an offered option. Marlin, like most other major manufacturers of the period, made it common practice to fulfill essentially any request from customers willing to pay, with this particular rifle almost certainly a prime example. The action features the beautiful Marlin factory engraving, exhibiting a buck panel scene on the left and a bear on the right, both surrounded by masterfully executed floral scrollwork on beaded backgrounds and decorative borders. The left of the action has the typical Marlin address and Ballard patent marking arranged in three lines. The top of the barrel has the caliber marking at the breech. The matching serial number is on the bottom of the frame, bottom of the barrel, rear face of the forearm, and inside the buttplate. The serial number on the bottom of the barrel appears to have been stamped through the finish. It is fitted with a windage adjustable globe front sight, no provision for a rear sight on the barrel, a Vernier peep sight mounted on the upper tang, and a loop and finger spur lever. It is mounted with a horn tipped forearm and straight grip stock, both with factory multi-point checkering, a cheekpiece, and a nickeled Schuetzen buttplate. Manufacturer: Marlin Firearms Co Model: Ballard-Rifle BBL: 32 inch round Stock: walnut Gauge: 38-55 Finish: blue/casehardened Serial Number16514 Class: Antique

Lot: 37 - Factory Engraved Marlin Ballard No. 6 Schuetzen Rifle

Attractive Factory Panel Scene Engraved Marlin Ballard No. 6 Schuetzen Single Shot Rifle Manufactured c. 1876 to 1891, this is a very attractive example of the Marlin Ballard No. 6 Schuetzen rifle with factory panel scene engraving. In "Ballard: The Great American Single Shot Rifle" by Dutcher, the Ballard No. 6 rifle is described as "the last word in target rifles" in its day. This example shows the highly attractive Marlin factory engraving featuring a circular panel scenes on either side of the receiver, exhibiting a doe on the left and a bear on the right. Both of the scenes are surrounded by masterfully executed floral scroll and border engraving. The left of the receiver has the standard two-line Marlin address and Ballard patent date. The barrel on this rifle has been relined to .22 caliber. It is fitted with a blank filler in the front sight dovetail, retains sight dovetail filled, and two scope blocks installed on top of the barrel. It has the typical finger spur and loop lever, as well as double set triggers. It is mounted with a checkered Schnabel tip forearm with horn tip and a checkered straight grip stock with a cheekpiece and nickeled Schuetzen buttplate. Manufacturer: Marlin Firearms Co Model: Ballard-Rifle BBL: 30 inch octagon Stock: walnut Gauge: .22 Finish: blue/casehardened Serial Number28675 Class: Antique

Lot: 38 - Serial Number 11 Antique Special Order Winchester Model 1873

Historic and Highly Desirable, One of the Earliest Known, Two-Digit Hand-Inscribed Serial Number 11 Antique Special Order Winchester First Model 1873 Lever Action Rifle with Raised "Thumbprint" Dust Cover, Extra Length 30 Inch Barrel, and Factory Letter Manufactured in 1873, the first year of production, this is the earliest example of the legendary Winchester Model 1873 that we have ever had the

Lot: 39 - ATF Exempt Winchester Model 92 Trapper's Carbine in .44-40 WCF

Highly Desirable Winchester Model 92 Lever Action Saddle Ring Trapper's Carbine in .44-40 W.C.F. with 14 Inch Barrel and ATF Exemption Letter Manufactured in 1920, this is a fine example of Winchester's Model 92 Trapper's carbine with the highly desirable 14 inch barrel and in the sought after .44-40 W.C.F. These handy little carbines were highly valued by anyone who sought rugged, portable firepower, such as farmers, ranchers, and trapper's, from whom they received their nickname. These carbines were often viewed as tools and generally saw years of hard use in harsh environments, leaving relatively few survivors, and even fewer in fine condition like this example. A 92 Trapper's carbine in .44-40 like this example would have been a very valuable companion in the wild American West well into the 20th century, particularly if paired with a sidearm in the same caliber, such as Colt's Frontier Six Shooter. This example includes a 2017 dated ATF letter stating that this carbine has been removed from the provisions of the NFA. There are Winchester factory oval proofs on the barrel and receiver at the breech. The left side of the barrel is marked with the two-line address and patent dates, as well as the caliber marking at the breech. The three-line model and trademark are marked on the upper tang, and the serial number is on the bottom of the receiver. It is fitted with a pinned blade front sight, folding ladder rear sight, and a saddle ring on the left of the receiver. It is mounted with a smooth forearm and straight grip stock with a carbine buttplate. Manufacturer: Winchester Model: 92 BBL: 14 inch round Stock: walnut Gauge: 44-40 WCF Finish: blue Serial Number897371 Class: Curio & Relic Long Gun

Lot: 40 - Antique Winchester Model 1873 Lever Action Rifle in .22 Short

Antique Winchester Model 1873 Lever Action Rifle in Desirable .22 Short Manufactured in 1893, this is a solid example of the legendary Winchester Model 1873 rifle chambered in .22 Short. The small caliber Model 1873s were ideal for hunting small game, as well as gallery type target shooting. According to Flayderman, Winchester only manufactured approximately 19,552 Model 1873s in .22 short or .22 long between 1884 and 1904. The top of the barrel is marked with the standard two-line address and King's patent markings, as well as the caliber marking at the breech. The caliber marking is repeated on the bottom of the cartridge elevator. The model marking is on the upper tang and the serial number is on the lower tang. It is fitted with a German silver No. 21 "Sporting" blade front sight and an elevation adjustable No. 24 notch rear sight. It is mounted with a smooth forearm and straight grip stock showing some nice figure with a crescent buttplate. Manufacturer: Winchester Model: 1873 BBL: 24 inch octagon Stock: walnut Gauge: 22 Short Finish: blue Serial Number469089B Class: Antique

Lot: 41 - Antique Colt Frontier Six Shooter Single Action Army Revolver

Antique Etched Panel Colt Frontier Six Shooter Single Action Army Revolver with Factory Letter The accompanying factory letter states this revolver was shipped on August 12, 1886, to Montgomery Ward & Co. in Chicago, Illinois, in .44-40 caliber with a 7 1/2 inch barrel, blue finish, and type of grip not listed, as part of 10 guns of the same type in the shipment. The left of the barrel has the desirable "COLT FRONTIER SIX SHOOTER" in an acid etched panel. Around 1890, the etched panel was replaced with a roll-stamped marking. The top of the barrel is marked with the one-line Colt Hartford address, and the "44" caliber designation is on the underside of the barrel. The left of the frame has the three-line patent dates, and "44.C.F." is marked on the left of the trigger guard. The matching visible full serial number is marked on the bottom of the frame, trigger guard and butt, matching partial serial number "8360" is marked on the cylinder and concealed area of the barrel, and assembly number "6126" is on the loading gate. Manufacturer: Colt Model: Single Action Army BBL: 7 1/2 inch round Gauge: 44-40 WCF Finish: blue/casehardened Grips: walnut Serial Number98360 Class: Antique

Lot: 42 - Antique Colt Single Action Army Revolver in .41 Long Colt

Antique Colt Single Action Army Revolver in .41 Long Colt with Factory Letter The accompanying factory letter states this revolver was the sole gun of its type in a shipment on August 28, 1896, to Hibbard, Spencer, Bartlett & Company in Chicago, Illinois, care of E.H. Morse, in .41 caliber with a 7 1/2 inch barrel (scarce in .41 Long Colt), blue finish, and hard rubber grips. The top of the barrel is marked with the one-line Colt Hartford address and "41 COLT." is on the left. The left of the frame has the two-line patent date markings and circled Rampant Colt. It has a blade front sight and frame-top groove rear sight, with a set of checkered hard rubber grips with Rampant Colt logos. Matching visible full serial numbers are marked on the bottom of the frame, trigger guard, and butt, unnumbered cylinder, assembly number "426" is on the loading gate, and both grips have removed numbers on the interiors. Manufacturer: Colt Model: Single Action Army BBL: 7 1/2 inch round Gauge: 41 Long Colt Finish: blue/casehardened Grips: hard rubber Serial Number167132 Class: Antique

Lot: 43 - New Haven Arms Co. Henry Rifle with Malcolm Telescopic Sight

Historic Early Production Civil War Era New Haven Arms Co. Henry Lever Action "Sharpshooter" Rifle with Extremely Scarce Malcolm Telescopic Sight Manufactured in October of 1862, just a year and a half into America's devastating Civil War, this is a historically significant example of the highly desirable New Haven Arms Company Henry lever action rifle, one of the most advanced weapons of the war.

Lot: 44 - Wm H Reed Jr Marked Sharps-Borchardt Model 1878 Military Rifle

Sharps-Borchardt Model 1878 Military Rifle with Wm. H. Reed Jr. Plaque The Sharps-Borchardt Model 1878 rifles were the last model introduced by Sharps and was respected by shooters for its stronger action and reputation for long range accuracy, both highly desirable attributes on the western frontier. Approximately 11,500 of the Military rifles were produced per "Sharps Firearms: Model 1878 Borchardt Patent Rifles and Other Sharps Models" by Marcot, Paxton, and Marron. It features a military style "barleycorn" front sight, original rear sight dovetail filled with a flush block, replacement notch and ladder rear sight, standard Sharps markings on the barrel and frame, musket-style forearm and straight grip buttstock with checkered shotgun buttplate and a "Wm H REED Jr" marked plaque affixed by two small screws on the right side. Reed's identity is not documented although William H. Reed (1860-1952), son of William Cross Reed (1835-1923), is one of the possibilities. He was born in Iowa and taught Laura Ingalls Wilder at the school in Burr Oak. He later homesteaded and taught in Ransom County, Dakota Territory, from 1882 until 1889 when he returned to Iowa. Manufacturer: Sharps Rifle Manufacturing Company Model: 1878 Borchardt BBL: 32 1/8 inch round Stock: walnut Gauge: 45-70 Government Finish: blue Serial Number6146 Class: Antique

Lot: 45 - Desirable Oneida Newhouse Animal Trap Co. No. 15 Bear Trap

Desirable Oneida Newhouse Animal Trap Co. No. 15 Bear Trap Manufactured in limited numbers by the Animal Trap Company of America, located in Lititz, Pennsylvania, from 1925 to around 1976. These traps were originally designed and manufactured by hand by the Sewell Newhouse firm of Oneida County, New York, with this large "No. 15" bear trap weighing in at about 19 pounds including the anchoring chain. Compared to firearms, traps such as these, along with their smaller variations, are an often overlooked, but no less important tool in surviving and taming the American frontier. Newhouse began making traps in the early 1800s, at first by using metal scraps from his father's blacksmith shop. In 1849, Newhouse joined a religious community started by John Humphrey Noyes and continued making traps by hand. The business gradually grew until becoming a primary manufacturing operation for the community. Their primary sellers were always smaller traps, such as those for beaver, with reported sales in 1864 being 7,250 beaver traps compared to only 30 bear traps, making these large game traps incredibly scarce. It has the Oneida Newhouse Animal Trap Co. markings on the pan in raised lettering and the offset jaws with exposed teeth. Manufacturer: None Model: None Class: Other

Lot: 46 - Antique Colt Single Action Army Revolver in .41 Long Colt

Antique Colt Single Action Army Revolver in .41 Long Colt Manufactured in 1893. The top of the barrel is marked with the one-line Colt Hartford address, and "41 COLT." is on the left. The left of the frame has the two-line patent date markings and circled Rampant Colt. It has a blade front sight and frame-top groove rear sight, with a set of checkered hard rubber grips with Rampant Colt logos. Matching visible full serial numbers are marked on the bottom of the frame, trigger guard, and butt, with matching partial "0753" correctly hand etched on the interiors of both grips, unnumbered cylinder, and assembly number "152" on the loading gate. The .41 Long Colt was well-regarded by legendary gunslinger Elmer Keith who wrote in "Sixguns": "the .41 long with its blunt nosed 200 grain bullet is an excellent man-stopper, far better than any loading of the .38 Special. It was Billy the Kid's favorite." Manufacturer: Colt Model: Single Action Army BBL: 5 1/2 inch round Gauge: 41 Long Colt Finish: blue/casehardened Grips: hard rubber Serial Number150753 Class: Antique

Lot: 47 - Otto Ernst, Gillette, Wyoming Cartridge/Money Belt and Holster

Scarce Otto F. Ernst, Gillette, Wyoming Cartridge/Money Belt and Highly Attractive Tooled Leather Holster This scarce and desirable Otto F. Ernst cartridge and money belt was produced in the early 1900s in Gillette, Wyoming. Ernst established his shop as early as 1900, and it operated as a family business in essentially the same location until 1976. The large maker's mark is in an oval on the billet containing the nickeled buckle, and there is an a "money pocket" opening near the buckle. The belt itself is 3 inches wide, has a single row of cartridge loops which appear they will accommodate up to .44 caliber cartridges, and measures approximately 38 inches long including the billet. The high quality holster is extensively and professionally tooled with floral and border motifs and will accommodate a 5 1/2 inch barrel Colt Single Action Army, Model 1878, or Bisley Model. A holster pictured on p. 57 of "End of the Trail" by Nichols attributed as by Visalia Stock Saddle Co. of San Francisco is nearly identical to this example, indicating that this holster was likely produced by the same company. The lower portion of the skirt is marked "6/951", indicating that this holster was likely ordered from the Visalia catalog. Manufacturer: None Model: None Class: Other

Lot: 48 - ATF Exempted Winchester Model 1892 Saddle Ring Trapper's Carbine

Highly Desirable ATF Exempted Winchester Model 1892 Lever Action Saddle Ring Trapper's Carbine in .44-40 W.C.F. with 14 Inch Barrel and Violin Case Manufactured in 1907, this is a highly desirable example of a Winchester Model 1892 Trapper's carbine with a 14 inch barrel. These Trapper's carbines found significant popularity in the American West well into the 20th century among those desiring firepower in a compact package, including ranchers, farmers, homesteaders, and trappers, hence its name. These carbines often saw many years of hard use as a working gun in harsh environments, leaving any surviving examples highly sought after among collectors today. The top of the barrel has the standard two-line address and patent dates as well as the caliber marking at the breech. The upper tang has the three-line model and trademark, while the serial number is marked on the bottom of the receiver. It is fitted with a pinned blade front sight, folding ladder rear sight, and a saddle ring on the left of the receiver. It is mounted with a smooth forearm and straight grip stock with a carbine buttplate. This included 1991 dated ATF letter lists the carbine by serial number as exempted from the provisions of the National Firearms Act. Includes a black finished violin case with the interior fitted for the carbine. Manufacturer: Winchester Model: 1892 BBL: 14 inch round Stock: walnut Gauge: 44-40 WCF Finish: blue Serial Number407898 Class: Curio & Relic Long Gun

Lot: 49 - Antique Winchester Model 1895 "Flatside" Lever Action Rifle

Scarce and Desirable Antique Winchester Model 1895 "Flatside" Lever Action Rifle Manufactured in 1896, the second year of production, it is one of approximately 5,000 of the desirable early "flatside" Model 1895 rifles. These early Model 1895 rifles often saw hard lives as working guns, meaning that many have not survived to be available for collectors today. This example has standard Winchester markings, including the early production four-digit serial number on the lower tang. It is fitted with a No. 21 German silver blade front sight and an elevation adjustable No. 24 notch rear sight. It is mounted with a smooth Schnabel tip forearm with ebony insert and a straight grip stock with a crescent buttplate. Manufacturer: Winchester Model: 1895 BBL: 26 inch octagon Stock: walnut Gauge: 40-72 Winchester Finish: blue Serial Number1146 Class: Antique

Lot: 50 - Antique Colt Single Action Army Revolver with Factory Letter

Antique Colt Single Action Army Revolver with Factory Letter The accompanying factory letter lists this revolver as shipped on December 30, 1892, to E.C. Meacham Arms Company in St. Louis, Missouri, in .38-40 caliber, with a 4 3/4 inch barrel, blue finish, and type of grips not listed, as part of 10 guns of the same type in the shipment. The barrel has the two-line Colt Hartford address marked on top and the "38 W.C.F." caliber designation is on the left. Matching visible full serial numbers are marked on the bottom of the frame, trigger guard and butt, faint remnants of what appears to be the matching partial number "9345" on the interiors of both grips, unnumbered cylinder, and assembly number "533" is marked on the loading gate. Manufacturer: Colt Model: Single Action Army BBL: 4 3/4 inch round Gauge: 38-40 WCF Finish: blue/casehardened Grips: hard rubber Serial Number149345 Class: Antique

Lot: 51 - W.R. Bennett & Co. Omaha Cartridge/Money Belt with Holster

W.R. Bennett & Co. Omaha, Nebraska Cartridge/Money Belt with Holster Manufactured c. the 1880s to 1890s, this is a desirable cartridge/money belt by W.R. Bennett & Co. of Omaha, Nebraska with a holster for a 4 3/4 inch barrel Colt Single Action Army revolver. For many western pioneers, Omaha was the gateway to the frontier, making it an ideal location for a saddler and gunleather maker. Bennett initially set up shop in Long Lane, Missouri around 1876, before moving to Omaha shortly afterward. The circular maker's mark is on the belt under the billet. The belt itself is 2 3/4 inches wide with a single row of .44/.45 caliber cartridge loops, a "money pocket" opening near the buckle, buckle billet marked "91/38", and measures approximately 40 inches long including the billet. The lightly tooled "Mexican loop" holster is in the typical style of the Northern Plains constructed of the same russet skirting leather and has a nicely curved throat. Manufacturer: None Model: None Class: Other

Lot: 52 - Special Order Winchester Deluxe Model 1894 Lever Action Rifle

Attractive Special Order Winchester Deluxe Model 1894 Lever Action Takedown Rifle Manufactured in 1918, this is a highly attractive example of a deluxe Winchester Model 1894 takedown rifle. Having established a profound legacy on the American frontier, the Winchester lever action banner was carried into the 20th century by the strong and streamlined Model 1894, which was yet another one of John Moses Browning's iconic designs. The 1894 would go on to be Winchester's most successful model, with over 7.5 million produced, it was arguably the most prolific American hunting rifle of the 20th century, establishing the Model '94 in particular as a true piece of Americana. Especially in the first half of the 20th century, these rifles could be found in the hands of hunters throughout the nation in every sort of the configuration one could dream of, including deluxe examples such as this, which would have been extremely prized by anyone heading into the woods in search of game. The top of the barrel and receiver have Winchester factory oval proofs at the breech. The upper left flat of the barrel is marked with the two-line address and patent dates, the nickel steel marking, and the caliber marking at the breech. The upper tang has the three-line model and trademark information, while the serial number is on the bottom of the receiver. The right side of the upper tang is marked upside down with the assembly number "41" followed by two punchdots, with "41" repeated on the butt of the stock, and two punchdots over "41" inside the buttplate. It is fitted with a Lyman "Hunting" front sight, an elevation adjustable notch rear sight, and a Lyman peep sight on the upper tang. It is mounted with a very finely figured forearm and pistol grip stock, both with factory H-pattern deluxe checkering, a hard rubber grip cap, and a crescent buttplate. Manufacturer: Winchester Model: 1894 BBL: 26 inch octagon Stock: deluxe walnut Gauge: 30-30 Winchester Finish: blue Serial Number880447 Class: Curio & Relic Long Gun

Lot: 53 - Desirable Bullard Large Frame "Model 1886" Lever Action Rifle

Exceptional and Highly Desirable Bullard Repeating Arms Co. Large Frame "Model 1886" Lever Action Rifle in .45-85 Bullard Manufactured c. 1883 to 1890, this is a very fine example of a rare special order large frame "Model 1886" rifle manufactured by the Bullard Repeating Arms Company. According to Gene Weicht in the American Society of Arms Collectors bulletin, the total production of Bullard rifles was never more than 2,800, and only around 1,500-2,000 of these were of the large frame variation like this example, making it quite rare. These rifles were patented in 1881 and were often later referred to in company literature as the Model 1886, likely an attempt to compete with Winchester's large frame repeater of the same name. Much like their competitors from Winchester and Marlin, these Bullard lever guns were offered in a wide array of configurations including both large and small frames, as well as military muskets. There were also a wide array of special order options available including multiple stock configurations and grades, calibers, and sights. Also like their competitors, these Bullards often saw hard use as working guns, with many finding their way to the western frontier, leaving very few surviving examples in high condition like this one. This particular example, chambered in the powerful .45-85 Bullard cartridge, would have been more than capable of downing even the largest game the frontier had to offer. Additionally, the rack-and-pinion design of the Bullard action made it not only one of the quietest, but also one of the smoothest operating actions available on the market during the period. The upper left of the action is marked with the two-line Bullard address and patent date and the caliber marking is on top of the breech. The serial number is marked on top at the rear of the action. It is fitted with a beaded blade front sight, a later replacement elevation adjustable Winchester No. 24 notch rear sight, and a long range peep sight on the upper tang. It has a special ordered half octagon barrel and a half magazine. It is mounted with a smooth forearm and straight grip stock with a crescent buttplate. Manufacturer: Bullard Repeating Arms Co Model: 1886 BBL: 28 inch part octagon Stock: walnut Gauge: 45-85 Bullard Finish: blue/casehardened Serial Number2602 Class: Antique

Lot: 54 - Whitney-Kennedy Small Frame Lever Action Rifle in .44-40 W.C.F.

Attractive and Desirable Early Production Whitney-Kennedy Small Frame Lever Action Rifle in Desirable .44-40 W.C.F. Manufactured c. 1879 to 1880, this is a solid example of one of the more rarely seen lever action repeaters of the American frontier, the Whitney-Kennedy. Much like their competitors from Winchester and Marlin, these repeaters from Whitney were commonly paired with a Colt Single Action Army revolver in the same caliber and often saw many years of hard use in the American West, which, along with already modest production numbers, has left relatively few available to today's collectors in any condition. This particular example is the small frame sporting rifle variation chambered in the renowned .44-40 W.C.F., a caliber that would have made it even more desirable in the West. The first 5000 of these Kennedys produced did not have a letter prefix on the serial number, meaning examples like this one were produced quite early in production. The top flat of the barrel is marked with the one-line Whitneyville Armory address, "KENNEDY", and with the caliber marking at the breech. The matching serial number is marked twice on the lower tang and on the left side of the early production "serpentine" lever. It is fitted with a German silver blade front sight and an elevation adjustable notch rear sight. It is mounted with a very nicely figured smooth forearm and straight grip stock with a trapdoor crescent buttplate containing an included four-piece cleaning rod. Manufacturer: Whitney Arms Company Model: Kennedy-Rifle BBL: 24 inch octagon Stock: walnut Gauge: 44-40 WCF Finish: blue Serial Number2332 Class: Antique

Lot: 55 - Factory Engraved E. Remington & Sons No. 1 Vest Pocket Pistol

Attractive Factory Engraved E. Remington & Sons No. 1 Vest Pocket Pistol with Case Manufactured c. 1865 to 1888, this is an exceptional example of Remington's highly desirable Vest Pocket pistol, also commonly known as their "Saw Handle Derringer". These pistols found popularity in both the cities of the east coast as well as on the untamed western frontier by anyone desiring extremely concealable firepower. A factory engraved example like this would have been particularly fitting for an upper class lady or gentleman. The pistol is extensively factory engraved on the sides of the frame with beautiful floral scrollwork on a beaded background borders on the upper edges of the frame, and a delicate arrow on top of the barrel. The matching serial number is on the left of the grip frame, bottom of the barrel, and hand-marked in pencil inside both grip panels. It is fitted with a post front sight and smooth rosewood grips. Includes a leatherette wrapped case with fitted interior. Manufacturer: E. Remington & Sons Model: Vest Pocket Pistol BBL: 3 1/4 inch part round Gauge: .22 Finish: nickel Grips: rosewood Serial Number11441 Class: Antique

Lot: 56 - Remington Elliot's Patent Ring Trigger "Zig-Zag" Derringer

Very Scarce Silver Plated Remington Elliot's Patent Ring Trigger "Zig-Zag" Derringer Manufactured c. 1861-1862, this is one of less than 1,000 of these Remington "Zig-Zag" derringers produced according to Flayderman. These were the first Remington firearms designed to fire metallic cartridges, with period advertisements listed them as "Elliott's Pocket Revolvers." Many have been lost or destroyed leaving few to fill their places in advanced Remington collections. They are difficult to find in any condition due to generally spending a lot of time pocketed. The left side of the frame has the standard three-line Elliot's patent marking, while the right of the frame has the standard three-line Remington address. The matching serial number is on the left of the grip frame and hand-scratched inside both grip panels. It is fitted with a pin front sight on each of the six barrel ribs, a notch rear sight, and a pair of smooth gutta percha grips. Manufacturer: E. Remington & Sons Model: Zigzag BBL: 3 1/4 inch cluster Gauge: 22 RF Finish: blue/silver Grips: gutta percha Serial Number851 Class: Antique

Lot: 57 - James Reid .22 Caliber My Friend Knuckle Duster Revolver

James Reid .22 Caliber My Friend Knuckle Duster Revolver This is one of an estimated 9,900 brass frame models manufactured from 1868 to 1882, according to "Flayderman's Guide". These uniquely designed revolvers provided those that carried them with the self-defense combination of seven shots of .22 Rimfire or, in a last ditch situation, a grip that could be use as a knuckle duster in hand-to-hand combat. Due to typically being carried in a pocket, these revolvers are rarely seen with as much of the original finish as this example shows. The left side of the top strap is marked "MY FRIEND" along with the 1865 patent date, while the left of the lower frame is also marked "MY FRIEND". The seven-shot cylinder is plain while the frame features a scroll engraving on the sides and engraved accents on the front and on the top strap. The full serial number is on the butt of the grip, while the matching last two digits are on the cylinder pin and rear of the cylinder. Manufacturer: Reid James Model: Knuckle Duster BBL: 1 1/2 inch cylinder Gauge: .22 Finish: silver Grips: metal Serial Number4593 Class: Antique

Lot: 58 - C.S. Shattuck Arms Co. Unique Four Shot Squeeze-Fire Palm Pistol

C.S. Shattuck Arms Co. Unique Four Shot Squeeze-Fire Palm Pistol Manufactured c. the early 1900s, these Unique four shot pistol were manufactured under contract and sold by C.S. Shattuck Arms Co. (misspelled "SHATUCK" on the side of the gun by contractor) of Hatfield, Massachusetts. They follow inventor Cornelius Vanderbilt, Jr.'s patent number 1,176,003 originally filed November 6th, 1915 and granted on March 21st, 1916. These pistols were offered in both .22 and .32 Rimfire, with the latter being the more scarce of the two, like this example. An example is photographed in Winant's book "Firearms Curiosa" and on pg. 82 it states, "There are four short barrels bored in a solid steel block which drops for loading when a vertical catch is released. The gun is gripped in the hand and fired by squeezing a sliding part which operates a rotating firing pin." Manufacturer: Shattuck C S Model: Unique BBL: 1 1/2 inch slab sided Gauge: 32 Rimfire Finish: nickel Grips: metal Serial Number47 Class: Curio & Relic Handgun

Lot: 59 - Frank Wesson Superposed Vest Pocket Pistol with Ivory Grips

Highly Desirable Frank Wesson Superposed Vest Pocket Pistol with Ivory Grips Manufactured c. 1868 to 1880, this is a fine example of the Frank Wesson Superposed pistol, also commonly referred to as the "Vest Pocket" or "Watch-Fob" pistol. Norm Flayderman estimates that only approximately 3,000 of these rare superposed pistols was produced. These pistols, like other diminutive pocket pistols, were particularly popular in the American West among gamblers, saloon keepers, and ladies of ill-repute due to being readily concealable and drawn at a moment's notice. The one-line address and patent marking is on either side of the barrels, while the serial number is marked on the left of the frame. It is fitted with a brass bead front sight on both the upper and lower barrel, as well as a pair of replacement ivory grips. Manufacturer: Frank Wesson Model: Superposed BBL: 2 inch fluted Gauge: .22 Finish: blue/brass Grips: ivory Serial Number2142 Class: Antique

Lot: 60 - Hammond Bulldog Single Shot Pistol with Rare Original Box

Attractive Connecticut Arms & Manufacturing Co. Hammond Bulldog Single Shot Pistol with Rare Original Box and Ammunition Less than 8,000 of these pistols are believed to have been produced starting in 1866 prior to the Connecticut Arms & Manufacturing Co. closed its doors around 1868. Firearms historian Michael Helms indicated the company's assets were purchased in 1872 by the American Sterling Company. Some of the pistols remained for sale as late as the 1880s. Single shot pocket pistols were widely carried for self-defense in the latter half of the 19th century and were also occasionally used by miscreants, be they a cheating poker player with one up his sleeve in case they were caught, or a foot pad looking for a mark in the busy streets. The Hammond Bulldog was one of the more ingenuitive designs and uses a rotating breech block that interlocks with the hammer at the time of discharge. They were designed by Henry and Lewis Hammond and patented in 1864 during the American Civil War. It has blade and notch sights, "CONNECTICUT ARMS & MANF'G Co NAUBUC CONN." on the barrel, "PATENTED OCT. 25. 1864" on the breechblock, and the matching serial number "339" marked on the right of the grip frame and both interiors of the checkered walnut grips. Includes a correct rare original unnumbered dot pattern box with an internal wooden cartridge block containing a full complement of six cartridges. Manufacturer: Connecticut Arms & Manufacturing Co Model: Bulldog BBL: 4 inch octagon Gauge: 44 Rimfire Finish: blue/casehardened Grips: walnut Serial Number339 Class: Antique

Lot: 61 - Young Factory Master Engraved Wesson Double Barrel Shotgun

Scarce and Highly Desirable Gustave Young Factory Master Engraved Wesson Damascus Double Barrel Hammer Shotgun Patented in December of 1867 by Daniel B. Wesson. According to Norm Flayderman, only approximately 219 of these scarce and highly desirable shotguns were manufactured from 1868 to 1870 with some, like this example, having been masterfully engraved by the legendary Master Engraver Gustave Young, who was Smith & Wesson's factory master engraver from 1869 into the 1890s. Young is considered one of the most talented American engravers of the 19th century and any examples of his work remained highly desirable among today's collectors. It is believed that these high quality shotguns were manufactured in the Smith & Wesson factory and then finished somewhere nearby. The limited production of these precisely fitted shotguns was due in large part to a plethora of cheaper competitors on the market at the time. It is built with blued Damascus steel barrels featuring a single bead sight and the single line Wesson address on the smooth concave solid rib, light scroll at the rib extension, and fitted with an extractor. The barrels are fitted to the casehardened bar-in-wood style action which displays extensive broad scroll designs by Gustave Young. It features rebounding hammers, bushed firing pins, double triggers, and a wedge fastener "monkey tail" toplever reminiscent of Remington's later Model 1874 and 1876. The gun is fitted with a nicely figured and multi-point checkered forend with wedge fastener and straight grip stock with blank inscription oval on the bottom and an engraved steel skeletonized buttplate. It has 2 1/2 inch chambers and choke constrictions of .005/.005. The length of pull is 13 7/8 inches. Manufacturer: Wesson Firearms Co Inc Model: Double BBL: 29 7/8 inch solid rib Stock: walnut Gauge: 12 Finish: brown/casehardened Serial Number114 Class: Antique

Lot: 62 - Smith & Wesson No. 2 Spur Trigger Revolver with Kidder Case

Exceptional Civil War Era Smith & Wesson No. 2 Army Spur Trigger Revolver with Attractive Ivory Grips and Desirable W. Kidder Case Manufactured c. 1861 to 1863, this is an exceptionally fine example of a Civil War era production Smith & Wesson No. 2 Army revolver with a rare and highly desirable hardwood case by Walter Kidder. A large number of these No. 2 Army revolvers were privately purchased by soldiers for use as a sidearm during the war, and many were also purchased by family members and friends and parting gifts for soldiers leaving for war. All of these revolvers with a serial number below 35731 were produced prior to 1 May 1865, meaning that it is very possible they saw Civil War use. Due to these revolvers being commonly carried as a sidearm, either in a holster or tucked in a belt, many during war time, it is quite rare to find them in high condition like this example. The one-line address is marked on top of the barrel rib and the patent dates are marked on the cylinder. The matching serial number is marked on the butt, front face of the cylinder, and rear face of the barrel lug. The matching assembly number "37" is marked on the left of the grip frame, front face of the cylinder, and rear face of the barrel lug. It is fitted with a German silver blade front sight and a notch rear sight on top of the cylinder latch. It is also fitted with a pair of smooth ivory grips. Includes a rare and highly desirable Walter Kidder hardwood case bearing his maker's mark and patent date on the upper rear edge of the lower half of the case. Very few Kidder cases were made for Smith & Wesson revolvers and are hardly ever found, making this example a valuable and important addition to the revolver. Manufacturer: Smith & Wesson Model: 2 Army BBL: 6 inch solid rib Gauge: 32 Rimfire Finish: blue Grips: ivory Serial Number7354 Class: Antique

Lot: 63 - Civil War Era Smith & Wesson No. 2 Spur Trigger Revolver

Outstanding Documented Nickel Finish Civil War Era Smith & Wesson No. 2 Spur Trigger Revolver with Case and Factory Letter Manufactured in early 1865, this is an outstanding example of a Civil War era Smith & Wesson No. 2 revolver. Due to their self-contained cartridges and bored through cylinders, these No. 2 revolvers were one of the more advanced sidearms of the day, being purchased in large numbers by both officers and enlisted men during the Civil War who were in search of a reliable and effective sidearm. This example remains in extremely high condition, a rare occurrence on today's collectors market. It has the standard Smith & Wesson markings, the matching serial number on the butt and stamped inside the right grip panel, and the matching assembly number "119" on the left of the grip frame, front face of the cylinder, and rear face of the barrel lug. It is fitted with a blade front sight, notch rear sight on top of the cylinder stop, and a pair of smooth rosewood grips. Includes a finely figured hardwood presentation case with a blank brass plaque on the lid and interior lined with maroon velvet. Manufacturer: Smith & Wesson Model: 2 BBL: 6 inch solid rib Gauge: 32 Rimfire Finish: nickel Grips: rosewood Serial Number33854 Class: Antique

Lot: 64 - Smith & Wesson No. 1 1/2 First Issue Spur Trigger Revolver

Exceptional Smith & Wesson No. 1 1/2 First Issue Spur Trigger Revolver with Highly Attractive Ivory Grips Manufactured c. 1865 to 1868, this is a highly attractive and very desirable example of a Smith & Wesson Model 1 1/2 First Issue revolver. Approximately 100,800 of these revolvers were made in this variation, but relatively few have remained in the high condition this example is found in. The top of the barrel on this example is marked with the standard two-line address and patent dates. The serial number is marked on the butt and in pencil inside the right grip panel. The assembly marking "Y4" is marked on the rear of the barrel lug, front face of the cylinder, and left side of the grip frame. It is fitted with a silver blade front sight, a notch rear sight on top of the cylinder latch, and a pair of smooth ivory grips. Manufacturer: Smith & Wesson Model: 1 1/2 BBL: 3 1/2 inch solid rib Gauge: 32 Rimfire Finish: blue Grips: ivory Serial Number7154 Class: Antique

Lot: 65 - Smith & Wesson No. 3 Russian Third Model Single Action Revolver

Documented Smith & Wesson No. 3 Russian Third Model Single Action Revolver in Very Scarce .44 Rimfire Manufactured c. 1874 to 1878, this is a highly attractive example of the Smith & Wesson No. 3 Russian Third Model revolver in the very scarce .44 Rimfire cartridge, also known as the "Turkish Model". It is pictured and noted by serial number on page 174 of the classic text "Smith & Wesson 1857-1945" by Robert J. Neal & Roy G. Jinks. Norm Flayderman lists around 500 Russian Second Model revolvers and an unknown number of (collectors believe around 250-300) Russian Third Model revolvers produced in ".44 Rimfire caliber" for commercial sale, most of which were over-runs from two military contract orders from the Turkish government. These revolvers were a contemporary competitor to the prolific Colt Single Action Army Revolver, having many beneficial features in comparison. Like the "Peacemaker", many of these No. 3 Russians saw extensive use in the American West. The top of the barrel rib on this example is marked with the standard one-line address ending with "RUSSIAN MODEL" and flanked by Maltese crosses. The scarce S&W "Reissue" stamping can be seen just in front of the large thumb screw used for cylinder removal. The matching serial number is marked on the butt, rear face of the cylinder, bottom of the barrel latch, and rear face of the barrel lug. It is fitted with a blade front sight, notch rear sight on top of the barrel latch, a lanyard swivel on the butt, and a pair of period replacement smooth walnut grips with the right panel stamped "3587" inside. Manufacturer: Smith & Wesson Model: 3 Russian BBL: 6 1/2 inch solid rib Gauge: 44 RF Finish: blue Grips: walnut Serial Number356 Class: Antique

Lot: 66 - Smith & Wesson No. 3 Russian Third Model Single Action Revolver

Smith & Wesson No. 3 Russian Third Model Single Action Revolver with Ivory Grips Manufactured c. 1874 to 1878, this is an attractive example of the Smith & Wesson No. 3 Russian Third Model revolver. These revolvers were a contemporary competitor to the prolific Colt Single Action Army Revolver, having many beneficial features in comparison, including quicker unloading and reloading due to its top-break configuration and ejector. Like the "Peacemaker", many of these No. 3 Russians saw extensive use in the American West. The top of the barrel rib on this example is marked with the standard one-line address ending with "RUSSIAN MODEL" and flanked by Maltese crosses. The serial number is marked on the butt. The matching assembly number "349" is marked on the right of the grip frame, rear face of the cylinder, rear face of the top strap, and bottom of the barrel latch. It is fitted with a blade front sight, notch rear sight on top of the barrel latch, a lanyard swivel on the butt, and a pair of period replacement smooth ivory grips with "553" marked in ink on the inside of both panels. Manufacturer: Smith & Wesson Model: 3 Russian BBL: 6 1/2 in solid rib Gauge: 44 S&W Russian Finish: nickel Grips: ivory Serial Number49188 Class: Antique

Lot: 67 - Smith & Wesson No. 3 American Second Model Revolver

Highly Desirable Smith & Wesson No. 3 American Second Model Single Action Revolver with Ivory Grips Manufactured c. 1872 to 1874, this is a fine example of the Smith & Wesson No. 3 American revolvers, one of the more rarely encountered, but no less iconic, revolvers of the American frontier. While Colt's "Peacemaker" was by far the most prolific sidearm in the American West, it was not without competitors, many of them offering significant advantages over the Colt. For the Smith & Wesson Americans, the biggest advantage was quicker unloading and reloading due to their top-break design, which many western gunslingers quickly took to. This particular example certainly has the look of having spent some years on the frontier as a trusted sidearm. The top of the barrel rib is marked with the standard single line address and patent dates. The serial number is stamped on the butt. The matching assembly number, "356", is marked on the right of the grip frame, rear face of the cylinder, rear face of the top strap, and bottom of the barrel latch. It is mounted with a pinned blade front sight, notch rear sight on top of the barrel latch, and a pair of smooth ivory grips , with the inside of both panels being marked with the matching serial number in ink. Manufacturer: Smith & Wesson Model: 3 BBL: 8 inch solid rib Gauge: 44 S&W American Finish: nickel Grips: ivory Serial Number23218 Class: Antique

Lot: 68 - Smith & Wesson No. 3 American First Model Single Action Revolver

Highly Desirable Smith & Wesson No. 3 American First Model Single Action Revolver with Factory Letter Manufactured in 1871, this is a highly desirable example of the Smith & Wesson No. 3 American First Model revolver. Entering the market in 1870, three years prior to Colt's iconic Single Action Army revolver, these Smith & Wesson's went on to forge a lasting legacy in the American West. Offering some significant advantages over Colt's "Peacemaker", these revolvers found popularity with those who valued the speed with which these revolvers could be unloaded and reloaded due to their top break design and ejector. Only approximately 8,000 of these American First Models were manufactured, with 1,000 of those being part of the U.S. contract. Many of these revolvers saw extensive frontier use with many having not survived, leaving relatively few available to today's collectors. The included factory letter lists this revolver among a 100 gun shipment containing both blued and nickeled revolvers with 8 inch barrels and walnut grips that went to M.W. Robinson Co. of New York on 29 June 1871. M.W. Robinson Co. was one of Smith & Wesson's largest distributors, sending many of their firearms westward to the frontier. The top of the barrel rib is marked with the single line address and patent dates flanked with Maltese crosses. The serial number is marked on the butt and stamped inside the right grip panel. The assembly marking "Z4" is marked on the right of the grip frame, rear face of the cylinder, rear face of the top strap, and bottom of the barrel latch. It is fitted with a period replaced pinned German silver blade front sight, notch rear sight on top of the barrel latch, and a pair of smooth walnut grips. Manufacturer: Smith & Wesson Model: 3 BBL: 8 inch solid rib Gauge: 44 S&W American Finish: blue Grips: walnut Serial Number3862 Class: Antique

Lot: 69 - Etched, Engraved, Gold Moore's Patent Front Loading Revolver

Exceptional Cased Exhibition Quality Factory Acid Etched, Engraved, and Gold Plated Moore's Patent Firearms Co. Front Loading Teatfire Revolver with Ivory Grips These distinctive pocket revolvers were manufactured by the Moore's Patent Firearms Company circa 1864 to 1870. They load from the front of the cylinder and use teat-fire cartridges with the primer in a projecting "teat" at the rear end which fits through the small openings at the rear of the cylinder. This ingenuitive design by Daniel Moore and David Williamson allowed these revolvers to get around Rollin White's claim for patent protection on the bored through cylinder which had given Smith & Wesson a nearly full control over the cartridge revolver market at the time. These Moore's revolvers were one of the most successful competitors to Smith & Wesson's cartridge revolvers but were eventually pushed out as a challenger with the loss of a patent infringement lawsuit. This example features very attractive scroll engraving with beaded backgrounds, which covers most of the frame as well as the barrel lug. The cylinder is extensively acid etched with floral and martial motifs, a factory exhibition grade embellishment that is rarely seen on these revolvers. The rear edge of the cylinder is marked with the Williamson patent date. The frame of the revolver, including the back strap and butt, shows extensive factory executed floral scroll engraving with a punchdot background. The top of the barrel is marked with the Moore's one-line address, and the underside is marked "3980". The assembly number "AM80" is marked on the left of the grip frame and the matching assembly number is hand marked in pencil inside both grips. It is fitted with a blade front sight and hammer notch rear sight, as well as the factory, smooth antique ivory grips. Includes a rosewood presentation type case with a cartridge block inside and a period replaced blank pearl inscription plate inset in the lid. Manufacturer: Moores Patent Firearms Co Model: Teatfire BBL: 3 1/4 inch round Gauge: 32 Teat-Fire Finish: gold Grips: ivory Serial Number3980 Class: Antique

Lot: 70 - Cased Pair of Factory Engraved Gold National Arms Co. Revolvers

Cased Pair of Factory Engraved Gold Plated National Arms Co. Front Loading New Model Cartridge Revolvers with Ivory Grips -A) National Arms Co. Front Loading New Model Cartridge Revolver Cased Pair of Factory Engraved Gold Plated National Arms Co. Front Loading New Model Cartridge Revolvers with Ivory Grips -A) National Arms Co. Front Loading New Model Cartridge Revolver Manufactured from 1864 to 1870 by Moore's Patent Firearms Co. and the National Arms Co. These revolvers and their ammunition were an inventive design by Daniel Moore and David Williamson to circumvent the Rollin White patent held by Smith & Wesson that prevented other companies from legally manufacturing revolvers with bored through cylinders. This pair of revolvers exhibit essentially identical factory engraving and have almost certainly been paired from the time they left the factory. The majority of the frames, the barrels, and the cylinders all exhibit masterfully executed floral scroll engraving on beaded backgrounds. The top of the barrels have the National Arms Co. address and the Williamson's patent marking follows the rear edges of the cylinders. The serial numbers are marked on the bottom of the barrels. The grips were not removed out of respect for their delicate nature. They are fitted with a German silver blade front sights, hammer notch rear sights, and smooth ivory grips. Includes a scarce hardwood dual gun case with two brass cleaning tools. Manufacturer: National Arms Co Model: Teat Fire BBL: 3 1/4 inch round Gauge: 32 Teat-Fire Finish: gold Grips: ivory Serial Number23784 Class: Antique B) National Arms Co. Front Loading New Model Cartridge Revolver See "A". Manufacturer: National Arms Co Model: Teat Fire BBL: 3 1/4 inch round Gauge: 32 Teat-Fire Finish: gold Grips: ivory Serial Number23792 Class: Antique

Lot: 71 - Factory Engraved Inscribed Colt New House Spur Trigger Revolver

Outstanding and Rare Documented Factory Engraved Colt New House Spur Trigger Revolver Factory Presentation Inscribed to Colt Employee William J. Collins with Factory Letter and Historical Documentation and Listed as the Highest Serial Number of this Model in "The Book of Colt Firearms" by R.L. Wilson Manufactured in 1886, this historic Colt is an outstanding example of a factory engraved New House Model .38 with the addition of a very desirable factory presentation inscription. The included factory letter confirms the current configuration, including the engraving, inscription, and grips, as well as sale and shipment to Henry C. Hallaver [sic] at the Colt Factory on 14 June 1893. The back strap of the revolver is inscribed "Presented to Wm J. Collins by his friends June 18th 1898". In included copies of the 1890 Hartford, Connecticut Geers City Directory Henry C. Hallauer is listed as a gunsmith/assembler at the Colt factory. William J. Collins is listed in the same directory as a driller at Colt. Collins is also listed in the 1st Infantry Regiment of the Connecticut National Guard from 1888 to 1900, reaching at least the rank of 2nd lieutenant. Multiple printed photographs, postcards, and a Connecticut National Guard badge are included. It is unclear from period newspapers why exactly this revolver was presented, and it may have been merely a token of friendship to a co-worker. Collins was promoted to 2nd lieutenant in his regiment in 1893, but it was in December of that year, well after the shipment of this revolver. Included 1969 dated correspondence between Dr. Robert G. Cox and R.L. Wilson is included with this revolver indicating that Dr. Cox purchased the revolver from Wilson. In a letter from Wilson, he indicates that factory engraved examples of Colt New House revolvers are very scarce and that many of the engraved examples of the period were outside work, particularly of the Nimschke type. This specific revolver is also listed by serial number on p. 308 of "The Book of Colt Firearms" by Wilson, where it states that this example is the highest serial number of the .38 caliber New House revolvers. The revolver itself has the standard two-line address on top of the barrel, "NEW HOUSE 38" on the left, and "38" on the bottom. There is a circled Rampant Colt on the left rear of the frame and the assembly number "281" is marked on the left of the grip frame and inside the loading gate. It has 75% plus coverage factory style floral scroll and zig-zag line engraving and the above mentioned factory inscription on the back strap. It is fitted with a blade front sight, frame top groove rear sight, loading gate, and a pair of smooth pearl grips. Includes an extensive binder of information including that discussed above in addition to information regarding Dr. Cox's collection as well as the Connecticut National Guard. Manufacturer: Colt Model: New House BBL: 2 1/4 inch round Gauge: 38 Centerfire Finish: nickel Grips: pearl Serial Number25634 Class: Antique

Lot: 72 - Engraved Gold Colt "Thuer" Derringer with Buffalo Bill Grip

Highly Attractive Factory Engraved Gold Washed Colt Third Model "Thuer" Derringer with Eagle and William F. "Buffalo Bill" Cody Bust Relief Carved Ivory Grips and "Cigar" Style Case These derringers were introduced in 1870 and manufactured until 1912, with around 48,000 total produced, though very few showed such an incredibly high level of factory embellishment like this particular piece. Colt's Third Model derringer was the first design for a derringer pistol developed in-house by the company, with both their First and Second Models having been designs acquired from their takeover of the National Arms Co. The Third Model derringer was a total redesign which was done by a longtime Colt gunsmith, F. Alexander Thuer. Thuer is credited with three different patents during his time with Colt, the first for a metallic cartridge conversion system for percussion revolvers, the second for tools for reloading the cartridges for said conversion, and the third for these derringer pistols. The No. 3, Third Model, or "Thuer" derringer patent was granted on 12 July 1870. This particular example of Thuer's derringer has extensive, exhibition quality, factory engraving on over 3/4 of the metal surfaces consisting mainly of highly detailed floral scrollwork on beaded backgrounds. It is almost certain that a Colt derringer with this level of embellishment was intended for either presentation or display at one of the large trade exhibitions of the period. The top of the barrel has a rounded blade front sight and "COLT" in large italic letters. The serial number is marked on the left of the grip frame and both of the grips have the matching serial number hand-marked in ink on the inside. This derringer shows similar scroll patterns to those applied on other Third Model derringers by Colt Master Engraver Cuno Helfricht, and this example was quite possibly executed by him. The embellishment on this particular derringer doesn't end with the engraving however, as the grips are also each a work of art. The expertly relief carved ivory grip fitted on this derringer feature a highly detailed perched eagle on the right grip, while the left grip features the bust of a man that is almost undoubtedly William F. "Buffalo Bill" Cody. Buffalo Bill was one of the biggest celebrities of his day and an American icon due to the fame and popularity of his Wild West show which drew large crowds around the world. He is known to have been presented and to have presented many firearms throughout his career, and it is quite possible that this derringer was made for one of those purposes. Included with this derringer is a highly desirable, leather-wrapped "cigar" style case with fitted interior, a combination screwdriver/cleaning rod, and a couple cartridges. Manufacturer: Colt Model: #3 Derringer BBL: 2 1/2 inch round Gauge: 41 Rimfire Finish: gold Grips: ivory Serial Number41648 Class: Curio & Relic Handgun

Lot: 73 - Cuno Helfricht Factory Master Engraved Colt Single Action Army

Highly Desirable Well-Documented Cuno A. Helfricht Factory Master Engraved Colt Single Action Army Revolver with Relief Carved Steer Head Pearl Grips and Factory Letter Manufactured in 1911, this is a highly desirable example of Colt's factory artistry by arguably their most legendary Master Engraver, Cuno A. Helfricht. Also known as the "Peacemaker", Colt's Single Action Army is arguably the most

Lot: 74 - Soft Shipped New York Engraved Colt 1877 Lightning Revolver

Documented Hartley & Graham Soft Shipped New York Engraved Etched Panel Antique Colt Model 1877 Lightning Double Action Revolver with Pearl Grips and Factory Letter The accompanying factory letter states this revolver was shipped on December 4, 1888, to Hartley and Graham in New York City, in .38 caliber with a 6 inch barrel, "soft" finish, and hard rubber grips, as part of six guns of the same type in the shipment. The remarks note that the "soft" listing for finish indicates the gun was left unfinished for engraving outside of the factory. The revolver is wearing a pair of period retailer pearl grips. This revolver features high quality period New York engraving consisting mainly of classic scroll engraving with beaded backgrounds and designs, a period retailer nickel finish and a set of period ivory grips. The engraving may have been performed by the shop of L.D. Nimschke, and has influences also seen in the work of Cuno Helfricht and his shop. Famed Master Engraved Louis D. Nimschke's primary client during his career from c. 1850 until his death in 1904 was Hartley & Graham in New York City, the largest firearms dealer in the country for much of the 19th century. The top of the barrel has the two-line Colt Hartford address and the left side features the desirable acid etched panel with "COLT D.A. 38". It has a blade front sight and frame-top groove rear sight. The left of the frame has the three-line patent date markings. "38 CAL" is marked on the left of the trigger guard. Matching visible full serial numbers are marked on the frame, trigger guard, and back strap, matching "183" on the rear face of the cylinder, matching "83" on the interior of the left grip, and assembly number "20" on the loading gate. Manufacturer: Colt Model: 1877 BBL: 5 inch round Gauge: 38 Long Colt Finish: nickel Grips: pearl Serial Number68183 Class: Antique

Lot: 75 - Desirable New York Engraved Colt 1878 Revolver with Pearl Grips

Desirable Gold and Silver Plated New York Engraved Colt Model 1878 Double Action Revolver with Pearl Grips and Factory Letters The most recent accompanying factory letter lists this revolver as shipped on August 26, 1897, to Hartley & Graham in New York City, in .45 caliber, with the special notation "for engraving," a 4 3/4 inch barrel, hard rubber grips, and type of finish not listed, as part of two guns of the same type in the shipment. A second older included factory letter repeats all of the same information besides an error mistakenly listing the revolver finish as blue, and an included Colt archives letter addresses that the finish was in fact "not listed." The revolver is wearing an attractive set of period retailer pearl grips. This is a very scarce Colt revolver. It features stunning New York engraving consisting of classic floral scrollwork on beaded backgrounds along with border designs, and a blank inscription panel on the backstrap. The two-line Colt Hartford address is marked on top of the barrel and "45 COLT" is on the left. The full serial number is marked on the butt, matching partial "667" is on the rear of the cylinder, assembly number "115" is on the loading gate and "155" is on the left of the grip frame. The revolver has a factory refurbishment star stamped on the right of the trigger guard. Manufacturer: Colt Model: 1878 BBL: 4 3/4 inch round Gauge: 45 Long Colt Finish: gold/silver Grips: pearl Serial Number37667 Class: Antique

Lot: 76 - Three-Digit Serial Number Colt Medium Frame Lightning Rifle

Desirable Antique First Year Production Three-Digit Serial Number Colt Medium Frame Lightning Slide Action Rifle Manufactured in 1884, the first year of production, this is a fine example of Colt's Lightning rifle with a desirable three-digit serial number. These Colt Lightnings found significant popularity in the American West, often seeing years of hard use in the harsh environment of the frontier leaving high condition examples quite rare on today's collectors market. These Medium Frame rifles were particularly popular in the West due to their shared calibers with the legendary Colt "Peacemaker", allowing one to carry just one type of ammunition for both their longarm and sidearm. This rifle has the standard Colt markings including the early production two-digit serial number on the lower tang. It is fitted with a "Rocky Mountain" type German silver blade front sight and an elevation adjustable notch rear sight. It is mounted with a multi-point checkered slide handle and a smooth straight grip stock with a crescent buttplate. Manufacturer: Colt Model: Lightning BBL: 26 inch round Stock: walnut Gauge: 38-40 WCF Finish: blue Serial Number934 Class: Antique

Lot: 77 - Engraved Colt Model 1883 Grade 1 1/2 Shotgun with Factory Letter

Factory Engraved Colt Model 1883 Grade 1 1/2 Double Barrel Shotgun with Factory Letter The included factory letter confirms the current gauge, barrel length, finish, wood stock, weight, and grade "1 1/2" when it was shipped on March 2nd, 1895, to John Pritzlaff Hardware Company of Milwaukee, WI. Built with Damascus steel barrels featuring a single bead sight on the matted concave solid rib which bears the Colt address, choke constrictions of .022/.025 inches, and chambers measured 2 3/4 inches with extractor. The barrels are fitted to the casehardened boxlock action which displays highly attractive scroll engraving surrounds the stylized "PATENTED" marking with dates on the underside before continuing onto the trigger guard and toplever. The gun features double triggers and a tang mounted manual safety. The gun is fitted with an attractively figured and multi-point checkered splinter forend with ebony tip inlay and matching engraved iron and release as well as a stunning well-figured pistol grip stock with hard rubber grip cap, blank silver stock oval, and red rubber recoil pad. Stock measurements: 1 7/16 inch drop at comb; 2 5/8 inch drop at heel; 13 3/4 inch length of pull; weight 7 lbs. 8 oz. Manufacturer: Colt Model: 1883-SHOTGUN BBL: 30 inch solid rib Stock: walnut Gauge: 12 Finish: blue/casehardened Serial Number7723 Class: Antique

Lot: 78 - Factory Engraved Colt 10 Gauge Model 1883 Shotgun with Letter

Factory Engraved Colt 10 Gauge Model 1883 Double Barrel Shotgun with Factory Letter The included factory letter confirms the current gauge, barrel length, finish, wood stock, and $3 worth of engraving, weight listed at 10 lbs. when it was shipped on July 1, 1886, to Hibbard, Spencer, Bartlett & Company of Chicago, Illinois. Built with blued Damascus steel barrels featuring a single bead sight on the smooth concave solid rib which bears the Colt address, choke constrictions of .038/.042 inches, and chambers measured 2 7/8 inches with a single extractor. The barrels are fitted to the casehardened boxlock action which displays light border engraving which continues onto the trigger guard, toplever, and both tangs as well as the stylized "PATENTED" marking with dates on the underside. The gun features double triggers and a tang mounted automatic safety. The gun is fitted with a nicely figured and multi-point checkered splinter forend with ebony tip inlay and matching engraved iron and release as well as a round knob pistol grip stock with a blank silver inscription oval and a Colt hard rubber buttplate. Stock measurements: 2 1/16 inch drop at comb; 3 1/4 inch drop at heel; 13 9/16 inch length of pull; weight 9 lbs. 13 oz. Manufacturer: Colt Model: 1883-SHOTGUN BBL: 32 inch solid rib Stock: walnut Gauge: 10 Finish: blue/casehardened Serial Number1011 Class: Antique

Lot: 79 - Colt 10 Ga. Model 1878 Double Barrel Hammer Shotgun with Letter

Colt 10 Gauge Model 1878 Double Barrel Hammer Shotgun with Factory Letter The included factory letter confirms the gauge, barrel length, finish, wood stock, and weight (1 oz. variance) when it was shipped to Colt's Arms Company on August 3rd, 1888. The letter further states that the gun was furnished with $75 worth of enhancements but no records indicate the specifics. Damascus steel barrels with single bead sight on the smooth concave solid rib, a previous owners personal identification electro-penciled on the underside, choke constrictions of .016/.022 inches, and chambers measured 2 7/8 inches with extractor. The casehardened sidelock action features border engraving, "Colt's Pt. F.A. Mfg. Co." marking on either lock, double triggers, and rebounding hammers. The gun is fitted with a nicely figured and multi-point checkered splinter forearm with ebony tip insert and Deeley style release as well as a round knob pistol grip stock with blank gold stock oval and Colt hard rubber buttplate. Stock measurements: 1 13/16 inch drop at comb; 2 7/8 inch drop at heel; 14 1/4 inch length of pull; weight 8 lbs. 1 oz. Manufacturer: Colt Model: 1878 BBL: 28 inch solid rib Stock: walnut Gauge: 10 Finish: blue/casehardened Serial Number15437 Class: Antique

Lot: 80 - Colt Factory Collection New House Spur Trigger Revolver

Outstanding Colt Etched Panel New House Spur Trigger Revolver from the Colt Factory Collection with Museum of Connecticut History Letter Manufactured in 1882, this is a an outstanding example of a Colt New House Model revolver with the desirable etched panel on the barrel that is documented as formerly of the Colt factory collection. The included letter from the Museum of Connecticut History lists the revolver by serial number, incorrectly referring to it as a "Colt 'New Line' Revolver" and noting that it was formerly displayed in the company collection before being donated to the museum in 1957. It is believed that the Colt factory collection became the property of the Arthur L. Ulrich Museum before being donated to the Museum of Connecticut History. Like Colt's New Line revolvers, these New Hose Models were intended both as a pocket-sized companion piece to Colt's full-sized "Peacemaker", as well as marketed towards urban residents in search of a concealable sidearm for self-defense. The top of the barrel on this example has the two-line address and the model and caliber marking in the acid etched panel on the left. The left of the frame is marked "38CAL". The serial number is marked on the left of the grip frame, the bottom of the barrel, and hand-scratched inside both grip panels. It has standard features including a pair of checkered hard rubber grips with "COLT" at the tops. Also includes copies of the original Colt collection inventories listing the revolver as well as copies of Arthur L. Ulrich Museum inventories listing the revolver. Manufacturer: Colt Model: New House BBL: 2 1/4 inch round Gauge: 38 Long Colt Finish: nickel Grips: hard rubber Serial Number12521 Class: Antique

Lot: 81 - Texas Shipped Glahn Factory Engraved Colt Single Action Army

Highly Attractive Documented Fort Worth, Texas Shipped Wilbur Glahn Factory Engraved Colt Single Action Army Revolver with Steer Head Relief Carved Pearl Grips and Factory Letter Manufactured in 1926, this is a rare and highly attractive example of a Wilbur Glahn factory engraved Colt Single Action Army revolver that was shipped to a well-known Fort Worth, Texas retailer. Also known as "The

Lot: 82 - The Only Known Cased Pair of Brass-Frame Colt No. 2 Derringers

Exceptional Well-Documented Only Known Cased Pair of Brass-Frame Colt No. 2 Derringers -A) Colt No. 2 Derringer Exceptional Well-Documented Only Known Cased Pair of Brass-Frame Colt No. 2 Derringers -A) Colt No. 2 Derringer Manufactured c. 1870 to 1890, this is the only known cased pair of brass-framed Colt No. 2 derringers, and they remain in exceptional condition. This pair of derringers are pictured on p. 394 of "The Colt Engraving Book Vol. I" and in "Colt Engraving" by Wilson, where they are described as the only known cased pair of brass-framed No. 2 derringers known to the author. The design for the No. 2 derringer, like the previous No. 1 derringer, was based on a design that had already been produced by the National Firearms Co., which was bought out by Colt in 1870. Approximately 9,000 of these No. 2 derringers were produced in total, making them relatively scarce, particularly high condition examples like this one. Norm Flayderman notes that the brass-frame variation of these derringers is rare, with only a few being produced in the 1500 serial number range and a limited number more produced in the 2500 serial number range like this pair. Solitary examples of the brass-framed No. 2 are very rare in their own right, making a cased pair in high condition such as this a truly scarce treasure. Interestingly, the Colt No. 1, No. 2, and No. 3 derringers were essentially produced and marketed concurrently until the No. 1 and No. 2 were dropped from production in 1890. These No. 2 derringers were one of the few Colt models to come standard with factory engraving across nearly all of the production run. This pair show the standard flourishes of floral scroll engraving on the sides of the frames, top of the back straps, and sides of the barrels, with some slight variation between the two, as is typical of hand engraving. The top of the barrels are marked with the two-line address and model marking flanked by Maltese crosses. There are British proofs on the bottoms of the barrels. The matching serial numbers are marked on the butt, bottom of the barrels. Both grip panels on derringer "2522" are matching numbered in ink, while the grips on derringer "2529" are numbered in ink, but the numbers are too faint to confirm as matching. Both are fitted with a German silver blade front sight, hammer notch rear sight, and a pair of varnished, checkered walnut grips. Included with the pair is a Colt London Agency labeled oak presentation case with blue velvet lined interior fitted for the pair, a cleaning rod, a key, and a few cartridges. Manufacturer: Colt Model: #2 Derringer BBL: 2 1/2 inch flat topped round Gauge: 41 Rimfire Finish: nickel Grips: walnut Serial Number2529 Class: Antique B) Colt No. 2 Derringer See "A". Manufacturer: Colt Model: #2 Derringer BBL: 2 1/2 inch flat topped round Gauge: 41 Rimfire Finish: nickel Grips: walnut Serial Number2522 Class: Antique

Lot: 83 - Documented Factory Engraved Silver Colt Model 1878 Revolver

Extremely Rare Well-Documented Factory Engraved, Silver Plated, Antique Colt Model 1878 Double Action Revolver in .38-40 W.C.F. with Pearl Grips and Factory Letter, Featured in Don Wilkerson's Book "Colt's Double-Action Revolver, Model of 1878" Offered here is a deluxe factory engraved Model 1878 featuring a Wells Fargo & Co. marking on the rear of the frame, and was likely made for presentation to someone of high status within the company. Wells Fargo & Co. was started in 1852 by Henry Wells and William G. Fargo, in which they became a leader in shipping and banking services throughout the late 19th century in the American West, and evolved into the company that we know today. The accompanying factory letter lists this revolver as sold to Mrs. Lonert Jonsen at an unlisted address and was the sole gun of its type in a shipment on April 13, 1894, to Simmons Hardware Company in St. Louis, Missouri, the gateway to the West, and confirms it as factory engraved, in .38-40 caliber, with silver finish, pearl grips, and an "illegible" barrel length. No further information has been located in relation to the individual Mrs. Lonert Jonsen. This exact revolver is featured on page 299 of "Colt's Double-Action Revolver, Model of 1878" by Don Wilkerson, in which the picture caption states, "This is the only silver plated revolver in .38-40 known to the author." Only 1,732 Model 1878 revolvers in total were reportedly shipped in .38-40 W.C.F. caliber, with this factory engraved silver plated example having features that make it far rarer than the rest. Wilkerson indicates his survey found just 284 Model 1878s were factory engraved, 7 of which were in .38-40, with only 1 listed as having a 4 3/4 inch barrel length, silver finish, and pearl stocks (although the barrel length is unlisted in the factory letter, this is likely the referenced 1 gun). The high quality engraving is typical of factory work performed under Colt Master Engraver Cuno Helfricht, with floral scrollwork on beaded backgrounds along with zig-zag line and dot designs. "W.F. & Co." stamped on the rear of the grip strap at a later date. The top of the barrel is marked with the two-line Colt Hartford address, with "38 W.C.F." in an engraved banner on the left. Full serial number marked on the butt, with the matching last two digits "17" restamped on the rear face of the cylinder, assembly number "135" on the loading gate and on the left of the grip frame. It is fitted with pearl grips, and has a lanyard swivel on the butt. Manufacturer: Colt Model: 1878 BBL: 4 3/4 inch round Gauge: 38-40 WCF Finish: silver Grips: pearl Serial Number33917 Class: Antique

Lot: 84 - Antique San Francisco Police Colt Lightning Medium Frame Rifle

Outstanding Documented Antique San Francisco Police Colt Lightning Medium Frame Slide Action Rifle in Desirable .44-40 W.C.F. with Factory Letter Manufactured in 1898, this is one of only approximately 400 Colt Lightning slide action rifles purchased by the San Francisco Police Department. By 1898, San Francisco had become a significant metropolis on the West Coast, important both culturally and in regards to the settlement of the American West, as well as being a vital troop hub during the Spanish-American War. The population at the time had rapidly grown to approximately 300,000, necessitating a well-armed and professional police force. For police purposes, these Colt slide actions had the added benefit of being able to hold down the trigger while operating the slide handle to fire multiple shots while remaining aimed at a target, giving law enforcement a significant advantage over most would-be criminals. These rifles were specially marked and numbered on the lower tangs. "S.F.P. 237" is marked on this example. The actual Colt production serial numbers ranged from 82088-83998 and are stamped on the tangs beneath the stock, with this example stamped "83337" on both. The top of the barrel is marked with the two-line address and patent dates, as well as the caliber marking at the breech. The left of the receiver is marked with the iconic Rampant Colt and the special serial number is on the lower tang. It is fitted with a German silver blade front sight and an elevation adjustable notch rear sight. It is mounted with a very finely figured slide handle with double line border carving and a straight grip stock with a crescent buttplate. Includes a framed Colt factory letter stating information about these San Francisco police Lightnings. Manufacturer: Colt Model: Lightning BBL: 26 inch round Stock: walnut Gauge: 44-40 WCF Finish: blue Serial NumberS.F.P.237 Class: Antique

Lot: 85 - Antique Colt Lightning Medium Frame Slide Action Rifle

Exceptional Antique Colt Lightning Medium Frame Slide Action Rifle in .44-40 W.C.F. Manufactured in 1890, this is an outstanding example of Colt's most successful entry into the market of frontier long guns, going head to head with Winchester's prolific lever actions. These Colt Lightnings found significant popularity in the American West, often seeing years of hard use in the harsh environment of the frontier even in deluxe configurations, leaving high condition examples quite rare on today's collectors market. These Medium Frame rifles were particularly popular in the West due to their shared calibers with the legendary Colt "Peacemaker", allowing one to carry just one type of ammunition for both their longarm and sidearm. Additionally, Colt's Lightning had the added benefit of being able to stay on target while being "slam fired", or holding down the trigger while operating the slide. Like their lever action competition, these Lightning rifles in standard configurations were often viewed as tools and saw many years of hard use in the West, leaving high condition examples like this exceptionally scarce. The top of the barrel is marked with the standard two-line address and patent dates, as well as the caliber marking at the breech. The left side of the receiver has the Rampant Colt and the serial number is on the lower tang. It is fitted with a German silver blade front sight and an elevation adjustable notch rear sight. It is mounted with a checkered slide handle and straight grip stock with a crescent buttplate. Manufacturer: Colt Model: Lightning BBL: 26 inch round Stock: walnut Gauge: 44-40 WCF Finish: blue Serial Number42748 Class: Antique

Lot: 86 - Wyoming Cattle Growers Association Colt Single Action Army

Historic Antique Omaha Shipped Colt Single Action Army Revolver Marked for the Wyoming Cattle Growers Association with Holster and Factory Letter The included factory letter lists this revolver in .41 caliber with a 4 3/4 inch barrel and blue finish (grips not listed) when part of a shipment of four guns of this type sent to Lee Clark Andreisen Hardware Co. in Omaha, Nebraska, on November 10,

Lot: 87 - Texas Shipped Colt "Fluted" Sheriff's Model Single Action Army

Highly Desirable Documented Houston, Texas, Shipped Antique Colt "Fluted" Frame Sheriff's Model Single Action Army Revolver with Factory Letters Two accompanying factory letters both state this revolver was shipped on November 27, 1896, to J.S. Dunlay in Houston, Texas, in .45 caliber with a 4 inch barrel, blue finish, and hard rubber grips, as one of 4 guns of the same type in the shipment. The listed retailer went by the full name of J.S. Dunlay Hardware Company at the time of this revolvers shipment in 1896, and the firm operated just prior as Dunlay & Geisler at the same location on Travis Street in Houston, Texas. This is one of only 70 recorded in factory ledgers in this specific configuration with a 4 inch barrel and blue finish out of only 224 total non-engraved Sheriff's Model revolvers in .45 Long Colt in the 1-164100 serial range per page 326 of "The Official Record of the Colt Single Action Army Revolver, 1873-1895" by the Wilkersons and Hoyt. Just under 600 ejectorless Sheriff's Model Single Action Army revolvers total were produced in all calibers between 1882 to the 1930s, making them among the rarest and most sought after variations of the legendary Peacemaker. Whether on the hip of a lawman, carried by an outlaw or under the counter of a storekeeper's shop, the Sheriff's Model was at the front lines of the American frontier. This Sheriff's Model revolver has the desirable "fluted" frame which differs from standard frame revolvers that have provisions for an ejector rod. The top of the barrel is marked with the two-line Colt Hartford address and "45 COLT." is on the left. The left side of the frame has the two-line patent date markings and a circled Rampant Colt. Matching visible serial numbers are marked on the frame, trigger guard, and butt, unnumbered cylinder and grips, and assembly number "14" on the loading gate. This revolver is listed by its serial number and configuration on page 390 of "Colt Peacemaker Encyclopedia: Volume 2" by Keith Cochran. Manufacturer: Colt Model: Single Action Army BBL: 4 inch round Gauge: 45 Long Colt Finish: blue/casehardened Grips: hard rubber Serial Number159326 Class: Antique

Lot: 88 - Antique Colt Single Action Army Revolver with Factory Letter

Exceptional Antique Colt Single Action Army Revolver with Factory Letter This is an attractive 1897 production example of a Colt Single Action Army revolver chambered for the legendary .45 Long Colt cartridge. The accompanying factory letter shows two differing listings recorded for this serial number, one of which likely being a factory recording error. The first listing, likely the error, states this revolver was shipped on November 11, 1897, to Simmons Hardware Company in St. Louis, Missouri, in .41 caliber with a 4 3/4 inch barrel, blue finish, and hard rubber grips as part of 10 guns of the same type in the shipment. The second listing, and likely the proper shipment record, states this revolver was shipped on the same date to the same destination in .45 caliber with a 5 1/2 inch barrel, blue finish, and hard rubber grips as part of 5 guns of the same type in the shipment. A standard configuration revolver like this would have been viewed as a working gun during the period, making a very fine example such as this one difficult to find today. The top of the barrel has the one-line Colt Hartford address and "45 COLT." is on the left. The left of the frame has the two-line patent dates and a circled Rampant Colt. Matching visible serial numbers are marked on the bottom of the frame, trigger guard, and butt, unnumbered cylinder and grips, and assembly number "747" is on the loading gate. Manufacturer: Colt Model: Single Action Army BBL: 5 1/2 inch round Gauge: 45 Long Colt Finish: blue/casehardened Grips: hard rubber Serial Number173503 Class: Antique

Lot: 89 - Attractive Colt Single Action Army Revolver with Pearl Grips

Attractive Factory Nickel Plated Colt First Generation Single Action Army Revolver with Pearl Grips Manufactured in 1915. An included scanned copy of a factory letter lists this revolver as sold to individual J.I. Steech and the sole gun of its type in a later shipment on August 18, 1916, to J.H. Martin in Little Rock, Arkansas, in .45 caliber, with a 5 1/2 inch barrel, nickel finish, and type of grips not listed. It is wearing a pair of period correct factory pearl grips with the Rampant Colt medallions. The top of the barrel is marked with the one-line Colt Hartford address and "45 COLT" is on the left. Matching visible serial numbers are marked on the frame, trigger guard, and butt, unnumbered cylinder, unnumbered grips, and assembly number "170" is on the loading gate and rear of the frame. Manufacturer: Colt Model: Single Action Army BBL: 5 1/2 inch round Gauge: 45 Long Colt Finish: nickel Grips: pearl Serial Number331954 Class: Curio & Relic Handgun

Lot: 90 - Pair of Colt Third Model "Thuer" Derringers with Leather Case

Outstanding Pair of Colt Third Model "Thuer" Derringers with Attractive Leather Presentation Case -A) Colt Third Model "Thuer" Derringer Outstanding Pair of Colt Third Model "Thuer" Derringers with Attractive Leather Presentation Case -A) Colt Third Model "Thuer" Derringer Colt manufactured these Third Model derringers from 1870 to 1912, and they were Colt's most popular single shot pocket pistols. This exceptionally high condition pair has the later sloped hammers, and "open" grip frames. Both have the standard italic "-COLT-" marking on the tops of the barrels. Though not consecutively serialized, this pair almost certainly left the factory cased together. Both of these derringers have their matching respective serial numbers on the left of the grip frames, bottom of the barrels, and both grip panels of each in pencil. They are both fitted with German silver blade front sights and highly attractive, finely checkered walnut grips. Included with this magnificent pair is a very rarely seen leather presentation case with blank brass inscription dome on the lid, interior Colt label with both the Hartford address and Pall Mall, London address (no British proofs on the pistols), cleaning tools, and a cartridge block with a full compliment of cartridges. The lid of the case has attractive lightly tooled borders. Manufacturer: Colt Model: #3 Derringer BBL: 2 1/2 inch round Gauge: 41 Rimfire Finish: blue/nickel Grips: walnut Serial Number19813 Class: Curio & Relic Handgun B) Colt Third Model "Thuer" Derringer See "A". Manufacturer: Colt Model: #3 Derringer BBL: 2 1/2 inch round Gauge: 41 Rimfire Finish: blue/nickel Grips: walnut Serial Number19789 Class: Curio & Relic Handgun

Lot: 91 - Engraved Silver and Gold Inlaid Colt Single Action Army

Spectacular Extensively Engraved Silver and Gold Inlaid Colt First Generation Single Action Army Revolver with Gold/Silver Overlaid Relief Cast Metal Grips Manufactured in 1907, subsequently extensively and elaborately embellished by an unknown skilled artisan. It features floral bud and leaf motif engraving spanning across the barrel, ejector rod housing, frame, cylinder, and both grip straps, with the floral motifs on the barrel, frame, cylinder and grips straps inlaid in silver along with gold inlaid birds, contrasted with a niter blue finish. It has fixed blade front and top strap notch rear sights, the Colt Hartford address in two lines on top of the barrel with the caliber designation retained on the left side, the two-line patent dates retained on the left side of the frame, along with a triangle "VP" factory proof and "T" on the left side of the trigger guard. Matching full serial numbers on the frame, trigger guard, and butt, along with the assembly number "1838" on the rear of the loading gate. Fitted with a pair of cast metal grips with Central American themed bordering and floral motifs inlaid in silver, along with depictions of the Rampant Colt and Mexican Coat of Arms inlaid in gold on both panels. Manufacturer: Colt Model: Single Action Army BBL: 4 3/4 inch round Gauge: 45 Long Colt Finish: blue/silver/gold Grips: metal Serial Number291395 Class: Curio & Relic Handgun

Lot: 92 - Engraved Silver and Gold Inlaid Colt Single Action Army

Extensively Engraved Silver and Gold Inlaid Colt First Generation Single Action Army Revolver with Engraved and Gold/Silver Overlaid Cast Metal Grips Manufactured c. 1905, subsequently extensively and elaborately embellished by an unknown skilled artisan. It features floral bud and leaf pattern engraving spanning across the barrel, ejector rod housing, frame, cylinder, and both grip straps, with the floral motifs inlaid in silver, gold inlaid leaf bordering at the front and rear of the barrel, along with gold inlaid bordering around the barrel markings and on the cylinder, contrasted with a niter blue finish. The frame has the single screw cylinder pin retention. It has fixed blade front and top strap notch rear sights, and the remarked Colt Hartford address in two lines on top of the barrel with the caliber designation retained on the left side. Matching full serial numbers on the frame and trigger guard. Fitted with a pair of cast metal grips with Central American themed bordering and floral motifs overlaid in silver, along with depictions of the Rampant Colt and Mexican Coat of Arms inlaid in gold on both panels. Manufacturer: Colt Model: Single Action Army BBL: 4 3/4 inch round Gauge: 45 Long Colt Finish: blue/silver/gold Grips: metal Serial Number261304 Class: Curio & Relic Handgun

Lot: 93 - Kansas City Shipped Colt Single Action Army with Factory Letter

Documented Kansas City, Kansas, Shipped Colt First Generation Single Action Army Revolver with Factory Letter The accompanying factory letter states this revolver was shipped on September 12, 1922, to Schmelzer Arms Co. in Kansas City, Kansas, in .45 caliber with a 4 3/4 inch barrel, blue finish, and type of grips not listed, as part of five guns of the same type in the shipment. The top of the barrel is marked with the two-line Colt Hartford address and the "45 COLT" caliber marking is on the left. The left of the frame is marked with the two-line patent dates followed by the Rampant Colt. The left of the trigger guard is marked "3" over a triangle "VP" proof. The matching visible full serial number is marked on the frame, right side of the grip straps, and correctly hand etched on the interiors of both grips, matching "05" is marked on the rear of the cylinder, and assembly number "185" is on the loading gate and rear of the frame. Manufacturer: Colt Model: Single Action Army BBL: 4 3/4 inch round Gauge: 45 Long Colt Finish: blue/casehardened Grips: hard rubber Serial Number343505 Class: Curio & Relic Handgun

Lot: 94 - Colt Bisley Single Action Army Revolver with Factory Letter

Colt Bisley Model Single Action Army Revolver with Factory Letter The accompanying factory letter states the revolver was shipped on November 30, 1901, to Hibbard, Spencer, Bartlett & Co. in Chicago, Illinois, in .45 caliber with a 4 3/4 inch barrel, blue finish, and type of grips not listed, as part of 11 guns of the same type in the shipment. The revolver has the distinctive Bisley Model features which include the higher frame, humpback grip area, curved hammer with wide knurled spur, and wide trigger. It has a blade target front sight and frame notch rear sight. The top of the barrel is roll-stamped with the two-line Colt Hartford address and "(BISLEY MODEL) 45 COLT." is on the left. It has two-piece checkered hard rubber humpback grips with the Rampant Colt logo embossed in an oval at the tops. The matching full serial number is marked on the frame, trigger guard and butt, unnumbered cylinder and grips, and assembly number "440" on the loading gate. Manufacturer: Colt Model: Single Action Army BBL: 4 3/4 inch round Gauge: 45 Long Colt Finish: blue/casehardened Grips: hard rubber Serial Number218588 Class: Curio & Relic Handgun

Lot: 95 - Colt Single Action Army Revolver in .32-20 W.C.F.

Colt First Generation Single Action Army Revolver in .32-20 W.C.F. Manufactured in 1901. The top of the barrel is roll-stamped with the one-line Colt Hartford address and "32 W.C.F." is on the left. It has a blade front sight and frame-top groove rear sight, and two-piece checkered hard rubber grips with Rampant Colt logos. The matching full serial number is marked on the frame, trigger guard and butt, unnumbered cylinder and grips, and assembly number "667" is on the loading gate. Manufacturer: Colt Model: Single Action Army BBL: 4 3/4 inch round Gauge: 32-20 WCF Finish: blue/casehardened Grips: hard rubber Serial Number218602 Class: Curio & Relic Handgun

Lot: 96 - Antique Colt Single Action Army Revolver

Antique Colt Single Action Army Revolver This 1898 production Colt Single Action Army revolver is chambered for the iconic .45 Long Colt cartridge and has the standard 7 1/2 inch barrel length and checkered hard rubber grips bearing the Rampant Colt logos. The top of the barrel has the one-line Colt Hartford address and "45 COLT." is on the left. The left of the frame has the two-line patent dates and a circled Rampant Colt. Matching visible serial numbers are marked on the bottom of the frame, trigger guard, and butt, unnumbered cylinder and grips, and assembly number "178" is on the loading gate. Manufacturer: Colt Model: Single Action Army BBL: 7 1/2 inch round Gauge: 45 Long Colt Finish: blue/casehardened Grips: hard rubber Serial Number180179 Class: Antique

Lot: 97 - Colt Bisley Model Single Action Army Revolver in .32-20 W.C.F.

Colt Bisley Model Single Action Army Revolver in .32-20 W.C.F. with Factory Letter The accompanying factory letter states this revolver was shipped on June 16, 1906, to Simmons Hardware Company in St. Louis, Missouri, in .32-20 with a 5 1/2 inch barrel, blue finish, and type of grips not listed, as part of five guns of the same type in the shipment. The revolver has the distinctive Bisley Model features which include the higher frame, humpback grip area, curved hammer with wide knurled spur, and wide trigger. It has a blade target front sight and frame notch rear sight. The top of the barrel is roll-stamped with the one-line Colt Hartford address and "(BISLEY MODEL) 32 W.C.F." is on the left. It has two-piece checkered hard rubber humpback grips with the Rampant Colt logo embossed in an oval at the tops. The matching full serial number is marked on the frame, trigger guard and butt, with matching "9010" correctly hand etched on the interiors of the grips, unnumbered cylinder, and assembly number "687" on the loading gate. Manufacturer: Colt Model: Single Action Army BBL: 5 1/2 inch round Gauge: 32-20 WCF Finish: blue/casehardened Grips: hard rubber Serial Number279010 Class: Curio & Relic Handgun

Lot: 98 - Antique Colt Single Action Army Revolver with Factory Letter

Antique Colt Single Action Army Revolver in .32-20 W.C.F. with Factory Letter The accompanying factory letter states this revolver was shipped on September 16, 1898, to Hibbard, Spencer, Bartlett & Co. in Chicago, Illinois, in .45 caliber with a 4 3/4 inch barrel, blue finish, and hard rubber grips, as part of 8 guns of the same type in the shipment. The revolver was subsequently chambered in .32-20 W.C.F. with a factory barrel and cylinder. The top of the barrel is marked with the two-line Colt Hartford address and "32 W.C.F." is on the left. Matching visible full serial numbers are marked on the frame, trigger guard and butt, matching "62" is on the rear of the cylinder, assembly number "750" is on the loading gate, and non-matching numbers are hand etched on the interiors of the factory grips. The initials "OJ" and a swastika are hand carved on the interior of the right grip. Manufacturer: Colt Model: Single Action Army BBL: 4 3/4 inch round Gauge: 32-20 WCF Finish: blue/casehardened Grips: hard rubber Serial Number180062 Class: Antique

Lot: 99 - Factory Engraved Colt New Line .22 Spur Trigger Revolver

Well-Documented First Year Production, Three-Digit Serial Number, Factory Engraved Colt New Line .22 Spur Trigger Revolver with Ivory Grips and Case Manufactured in 1873, the first year of production, this is an exceptional example of a factory engraving Colt New Line .22 revolver. This revolver is pictured in its case on p. 406 of "The Colt Engraving Book Vol. I" by Wilson with the description of it indicating that this is an interesting variation of factory engraving pattern, illustrating the fact that the factory engravers changed their typical patterns from time to time to keep things fresh. In that book the revolver is pictured within the case included with it now, which also shows the presentation note that still remains in the case. The note is handwritten and states "Mrs L.H. Sweet/Compliments of/F.W. Green", whose identities remain unknown, though both names appear in period newspapers from multiple locations. Whoever Sweet and Green may have been, this was undoubtedly a very fine gift. The revolver shows fairly typical factory floral scroll engraving on beaded backgrounds on the frame, while the chambers of the cylinder and the sides of the barrel have distinct geometric designs that are seen less often. The top of the barrel is marked with the two-line address flanked by Maltese crosses. The matching serial number is on the butt, rear face of the cylinder, and bottom of the barrel. It has standard features and is fitted with a pair of attractive, unnumbered, smooth ivory grips. Includes a leatherette wrapped case with a cartridge block inside containing a full compliment of cartridges, a cleaning rod, and the above mentioned note. Manufacturer: Colt Model: New Line BBL: 2 1/4 inch slab sided Gauge: 22 Long Finish: nickel Grips: ivory Serial Number291 Class: Antique

Lot: 100 - Outstanding Colt Bisley Single Action Army in Scarce .44 Russian

Outstanding Colt Bisley Model Single Action Army Revolver in Very Scarce .44 Russian with Factory Letter This stunning Colt Bisley Model Single Action Army revolver remains in a high state of condition and is factory chambered in the very uncommon .44 Russian caliber. The accompanying factory letter lists this Bisley Model revolver as shipped on May 5, 1909, to John B. Varick Company in Manchester, New Hampshire, in .44 Russian with a 7 1/2 inch barrel, blue finish, and type of grips not listed, as the sole gun of its type in the shipment. It is one of only 90 Bisley Model Single Action Army revolvers recorded in factory ledgers as shipped in .44 Russian per the figures on page 252 of "The Book of Colt Firearms" by Wilson. The Colt Bisley Model was only manufactured between 1894-1912, designed by Colt with accuracy and target shooting in mind. For many, the Bisley feels better in the hand and cocks and fires easier thanks to its lower and wider hammer and the wider trigger, making them excellent sidearms for serious marksmen. The revolver has the distinctive Bisley Model features which include the higher frame, humpback grip area, curved hammer with wide knurled spur, and wide trigger. The top of the barrel is roll-stamped with the one-line Colt Hartford legend with "(BISLEY MODEL) 44 RUSSIAN CTG." on the left. A factory "VP" in a triangle proof and a "W" are stamped on the left of the trigger guard. It has a blade front sight, frame notch rear sight, and two-piece checkered hard rubber humpback grips with the Rampant Colt logo embossed in an oval at the tops. The matching full serial number is marked on the frame, trigger guard, and back strap, with matching "9237" correctly hand etched on the interiors of the grips, an unnumbered cylinder, and assembly number "1946" on the loading gate. Manufacturer: Colt Model: Single Action Army BBL: 7 1/2 inch round Gauge: 44 Russian Finish: blue/casehardened Grips: hard rubber Serial Number309237 Class: Curio & Relic Handgun

Lot: 101 - Colt Bisley Flattop Target Single Action Army in .32-20 W.C.F.

Scarce Colt Bisley Flattop Target Model Single Action Army Revolver in .32-20 W.C.F. with Factory Letter The accompanying factory letter states this Bisley Flattop Target Model revolver was shipped on January 13, 1910, to Wm. Rogers Company in Syracuse, New York, in .32-20 caliber with a 7 1/2 inch barrel, blue finish, and type of grips not listed, as the sole gun of its type in the shipment. Only 976 Colt Bisley Flattop Target Model revolvers were manufactured in total and only 131 of those are listed in factory ledgers as chambered for the .32-20 W.C.F. cartridge per page 252 of "The Book of Colt Firearms" by Wilson. The revolver has the distinctive Bisley Model features which include the higher frame, humpback grip area, curved hammer with wide knurled spur, and wide trigger. Features the scarce flattop frame, with a period shortened pinned blade target front sight and dovetail mounted square notch rear sight. The top of the barrel is roll-stamped with the one-line Colt Hartford legend, and "(BISLEY MODEL) 32 W.C.F." is on the left. The left side of the frame is roll-stamped with the two-line patent date markings followed by the circled Rampant Colt trademark. Matching visible full serial numbers are marked on the frame, trigger guard, and butt, with matching partial "0478" correctly hand etched on the interiors of both grips, unnumbered cylinder, and assembly number "17" on the loading gate and rear of the frame. A star is stamped on the right side of the trigger guard indicating the revolver was returned to the Colt factory at some point. Manufacturer: Colt Model: Single Action Army BBL: 7 1/2 inch round Gauge: 32-20 WCF Finish: blue Grips: hard rubber Serial Number310478 Class: Curio & Relic Handgun

Lot: 102 - Excellent California Shipped Colt Single Action Army Revolver

Excellent Documented Los Angeles, California, Shipped Colt First Generation Single Action Army Revolver with Factory Letter This is an excellent Prohibition era 1926 production Colt First Generation Single Action Army revolver. The accompanying factory letter states this was the sole revolver of its type in a shipment on January 14, 1926, to Wm. H. Hoegee Company in Los Angeles, California, in .45 caliber with a 7 1/2 inch barrel, blue finish, and hard rubber grips. Single Action Army revolvers in fairly standard configuration like this one were more often than not seen as working guns and worn regularly as a holstered sidearm well into the 20th century, leaving few examples in nicer condition available to collectors. The top of the barrel is marked with the one-line Colt Hartford address and the "45 COLT" caliber marking is on the left. The left of the frame is marked with the two-line patent dates followed by the Rampant Colt. The left of the trigger guard is marked "3" over a triangle "VP" proof. The matching visible full serial number is marked on the frame, right side of the grip straps, and correctly hand etched on the interiors of both grip panels, matching "87" is on the rear of the cylinder, and assembly number "61" is marked on the loading gate and rear of the frame. Manufacturer: Colt Model: Single Action Army BBL: 7 1/2 inch round Gauge: 45 Long Colt Finish: blue/casehardened Grips: hard rubber Serial Number348287 Class: Curio & Relic Handgun

Lot: 103 - Antique Colt Single Action Army Revolver with Factory Letter

Antique Colt Single Action Army Revolver with Factory Letter The accompanying factory letter states this revolver was shipped on March 2, 1898, to Simmons Hardware Company in St. Louis, Missouri, in .45 caliber, blue finish, hard rubber grips, and barrel length not listed, as part of 3 guns of the same type in the shipment. The factory letter has a further remark stating this is usually an indication of a 7 1/2 inch barrel length as that was considered standard for the period, and also indicates the records contain a second listing for this serial number stating it was shipped at an earlier date on February 15, 1898, to Walter Tips in Austin, Texas, in .45 caliber with a 4 3/4 inch barrel, blue finish, and hard rubber grips, as part of 10 guns of the same type in the shipment. This 1898 production Colt Single Action Army revolver has a 7 1/2 inch barrel marked with the Colt Hartford address on top and "45 COLT." on the left, and is wearing a set of checkered hard rubber grips bearing the Rampant Colt logos. The left of the frame has the two-line patent dates and a circled Rampant Colt. Matching visible serial numbers are marked on the bottom of the frame, trigger guard, and butt, faint matching partial "333" is correctly hand etched on the interior of the left grip, faint matching partial "6333" is handwritten on the forward interior edge of the right grip, unnumbered cylinder, and assembly number "924" is on the loading gate. Manufacturer: Colt Model: Single Action Army BBL: 7 1/2 inch round Gauge: 45 Long Colt Finish: blue/casehardened Grips: hard rubber Serial Number176333 Class: Antique

Lot: 104 - Antique Colt Single Action Army Revolver with Ivory Grips

Antique Colt Single Action Army Revolver with Ivory Grips This 1890 production Single Action Army is chambered in the iconic .45 Long Colt. The Colt Single Action Army was one of the most popular handguns in the late 19th century, and is hands down the most iconic revolver today and most thoroughly associated with the American West. This example has the appearance of a trusty sidearm carried out west. The top of the barrel has the two-line Colt Hartford address and "45 COLT." is on the left. The left of the frame has the three-line patent date markings. Matching visible full serial numbers are marked on the bottom of the frame, trigger guard and butt, unnumbered cylinder, and assembly number "536" is on the loading gate. The revolver is wearing a set of period ivory grips. Manufacturer: Colt Model: Single Action Army BBL: 4 3/4 inch round Gauge: 45 Long Colt Finish: blue/casehardened Grips: ivory Serial Number133855 Class: Antique

Lot: 105 - Colt 1877 Bulldog Classic Gatling Gun with Tripod and Cases

Colt Model 1877 Bulldog Classic Full Size Gatling Gun with Tripod, Transport Cases and Factory Letter Manufactured in limited quantities (possibly 50 total), this is a 21st century Colt-made museum quality continuation of the original 1877 Bulldog Gatling Gun, manufactured to the original scale. A refinement of the Civil War era Gatling design, the 1877 scaled down the overall design, included a bronze barrel jacket to protect the five barrels from debris or corrosive materials, and shifted the firing crank to the rear to streamline the mechanism and eliminate the need for an auto-traverse mechanism. This 1877 follows the original design with great fidelity, with some adjustments to accommodate the needs and expectations of modern shooters and collectors, in particular modern-style nomenclature and serial number markings on the rear of the frame and a barrel-locking safety mechanism on the underside. Fixed blade front and elevation adjustable notch rear sights with a right side offset, "No. 17" on top of the right trunnion, Bruce-pattern dual column gravity feed mechanism on the hinged top cover, and a vintage style Colt data plate on top of the frame. The tripod is brass, iron and walnut construction, with traverse and elevation adjustment mechanisms. Included with the lot are three transport cases with Colt markings branded into the lids, a printed "temporary" manual, and 5 inert bolts. Note: This item features a high-capacity magazine which has a capacity above 15 rounds and cannot be sold or transferred to individuals in CA, CT, CO, DC, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Colt Model: 1877 Gatling Gun BBL: 18 inch round Gauge: 45-70 Government Finish: bright/blue Serial NumberCGG0017 Class: Modern Other Firearm

Lot: 106 - Ainsworth Inspected U.S. Colt Cavalry Model Single Action Army

Exceptional and Highly Desirable Ainsworth Inspected U.S. Colt Cavalry Model Single Action Army Revolver with Kopec Gold Seal Letter Manufactured in 1874, this is an exceptional original example of an iconic Ainsworth inspected U.S. Colt Cavalry Model revolver. For a Colt collector, these early production, Ainsworth inspected Cavalry Models are undoubtedly an immense treasure, particularly those

Lot: 107 - Nickel A.P. Casey Inspected U.S. Colt Cavalry Single Action Army

Documented Nickel Plated A.P. Casey Inspected U.S. Colt Cavalry Model Single Action Army Revolver with John Kopec Letter This 1875 production U.S. Colt Cavalry Model revolver was sub-inspected by A. P. Casey and has no main inspector marking on the bottom of the frame. It features a period nickel plated finish, retains its desirable original 7 1/2 inch barrel length and escaped the recalls of the

Lot: 108 - Ainsworth U.S. Colt Cavalry Model Single Action Army Revolver

Ainsworth Inspected U.S. Colt Cavalry Model Single Action Army Revolver Offered here is a historic 1874 production Colt Cavalry Model Single Action Army revolver, inspected by Orville W. Ainsworth, extensively used out west, and later beautifully professionally restored by Turnbull with an accompanying invoice from them detailing all the work performed on this specific revolver. Orville W. Ainsworth was the principal sub-inspector of the Ordnance Department, in October 1873 through November 7, 1874, and performed the sub-inspection of every one of the first approximately 12,500 U.S. contract Colt Single Action Army revolvers in the recorded serial range between 200 through 14343 per page 201 of "A Study of the Colt Single Action Army Revolver" by Graham, Kopec, and Moore. The barrel has a blade front sight and is roll-stamped with the script address "+COLT'S PT. F. A. MFG. Co HARTFORD, CT. U.S.A.+". Two-line patent date markings ahead of a "US" property stamp are on the left of the frame. Small Ainsworth "A" sub-inspection mark and "P" proof marks on both the barrel and cylinder. Small Ainsworth "A" sub-inspection marks are also on the trigger guard and top of the back strap. Matching visible serial numbers are marked on the frame, trigger guard, cylinder, and butt, and assembly number "240" is on the loading gate. A bordered "OWA" cartouche is stamped on the left of the grip. Manufacturer: Colt Model: Single Action Army BBL: 7 1/2 inch round Gauge: 45 Long Colt Finish: blue/casehardened Grips: walnut Serial Number8115 Class: Antique

Lot: 109 - Cased London Shipped Antique Colt Single Action Army Revolver

Cased London Agency Shipped Antique Colt Single Action Army Revolver with Factory Letter The accompanying factory letter states this revolver was shipped on June 14, 1883, to Colt's London Agency at 14 Pall Mall in London, England, in .45 caliber, blue finish, with barrel length and type of grip not listed, as one of 12 guns of the same type in the shipment. The top of the barrel is stamped with the one-line Colt Hartford address, with "45 CAL" on the left of the trigger guard. London proof marks on the barrel and cylinder. The left of the frame has the three-line patent date markings. Period replacement dovetailed blade front sight, and frame-top groove rear sight. Matching visible full serial numbers appear on the frame, trigger guard, and butt, with matching "9231" on the cylinder, and assembly number "293" on the loading gate. Includes a felt lined wood display case with the Colt London trade label on the interior of the lid, containing 19 rounds of .45 Long Colt, "L" shaped screwdriver, oiler, cleaning rod, and key. Manufacturer: Colt Model: Single Action Army BBL: 5 1/4 inch round Gauge: 45 Long Colt Finish: blue/casehardened Grips: walnut Serial Number89231 Class: Antique

Lot: 110 - Rare U.S. Springfield 1875 Lee Vertical Action Trials Rifle

Rare and Exceptional U.S. Springfield Model 1875 Lee Vertical Action Single Shot Trials Rifle with Bayonet Offered here is a rare, attractive example of one of only 143 of these Model 1875 Lee rifles manufactured c. 1875 by U.S. Springfield Armory per page 591 of "Flayderman's Guide, 9th Edition". On June 23, 1874, Congress appropriated $10,000, "For the purpose of testing Mr. Lee's breech loading gun under the direction of the Secretary of War." Within a year, 143 rifles were completed under the supervision of inventor James Paris Lee, one of the great weapons designers of the late 19th century. Using the appropriated $10,000, it worked out to a cost of approximately $69.93 per rifle. The Model 1875 Lee drew inspiration from the Martini and Peabody single shot falling block rifles. The biggest change introduced by Lee was the use of a combination hammer and breech lever; from a decocked position, a push forward on the hammer drops the breech block and ejects a spent cartridge case, and when a new round is chambered the breech block automatically pops back upwards to a closed position via spring pressure. Once closed, the hammer can be thumbed back to a locked half-cock position for carry or all the way back to full-cock ready for firing. These single shot rifles were capable of a rate of fire of 40 rounds per minute with a trained operator. The Model 1875 Lee shares a number of components with the Springfield Model 1873 Trapdoor rifle then in service, chambered for the same .45-70 Government cartridge, featuring a blade front sight doubling as a socket bayonet lug and an 1,100 yard Model 1873 folding ladder rear sight. The serial number "129" is marked on the right concealed area of the hammer and bottom of the breech block. The upper tang is stamped "U.S." above "PAT. MAR. 16. 1875." The smooth straight grip stock is stamped with Springfield Armory's Master Armorer Erskine S. Allin's oval script "ESA" inspection cartouche on the left below the action, a circled script "P" proof is stamped behind the trigger guard, and "US" is marked on the buttplate tang. Includes a "US" marked socket bayonet with steel scabbard and "US" hanger with leather frog unit marked "CO/H/55". Manufacturer: Springfield Armory U.S. Model: 1875 Lee BBL: 32 5/8 inch round Stock: walnut Gauge: 45-70 Government Finish: blue/casehardened Serial Number129 Class: Antique

Lot: 111 - Exceptional Sharps-Borchardt Model 1878 Military Rifle

Exceptional Sharps-Borchardt Model 1878 Single Shot Military Rifle Approximately 6,900 of these military rifles were manufactured between 1878-1881, making them the bulk of the roughly 8,700 Model 1878 rifles made in total in all configurations, per page 205 of "Flayderman's Guide, 9th Edition". They were purchased by a variety of state governments, the National Rifle Association, and the governments of China and some South American countries. It has a military type blade/bayonet stud front sight, adjustable notch and folding ladder rear sight, sling swivels on the front barrel band and bottom of the frame, the "Old Reliable" marking and Sharps Bridgeport address on top of the barrel, and address, serial number, and patent markings on the left of the frame, with an encircled "B" on the left side of the buttstock. Manufacturer: Sharps Rifle Manufacturing Company Model: 1878 Borchardt BBL: 32 1/4 inch round Stock: walnut Gauge: 45-70 Government Finish: blue Serial Number19293 Class: Antique

Lot: 112 - Experimental Prototype U.S. Army Trials Peabody-Wessely Rifle

Rare Well-Documented Experimental Prototype U.S. Army Trials Providence Tool Co. Peabody-Wessely Single Shot Rifle Offered here is one of only a few known experimental prototype Peabody-Wessely rifles manufactured c. 1868-1870 by the Providence Tool Co. of Providence, Rhode Island. The Providence Tool Co. submitted two examples of Peabody-Wessely rifles for trials to the U.S. Army Ordnance Board convened in St. Louis in 1870, and the company also published a brochure for edification of the board members stating it was "chambered for the Russian central fire Berdan cartridge." This exact rifle is pictured on page 110 of "Peabody Firearms" by Edward Hull, along with two other similar examples pictured and related information on pages 105-111. Some of the internal workings of this rifle are illustrated in U.S. patent number 92,673 dated July 13, 1869 and granted to Zdenko Ritter von Wessely (incorrectly spelled Zdeuko in the patent) listed as a civil engineer residing in New York City and assignor to Providence Tool Co. The rifle features a tipping breech block with an internal hammer, spring-loaded lever catch, a trigger block safety mechanism (the latter two features are not mentioned in the patent), the right muzzle end of the barrel has a lug made to accept mounting of the Russian Berdan I rifle pattern socket bayonet, a blade front sight and ladder rear sight. The serial number "3" is marked on the concealed front surface of the frame and the interior of the bottom frame plate, a "7" is on the left breech area of the barrel, a "C" is on the bottom of the barrel, and an "S" is on the top of the buttplate. Manufacturer: Providence Tool Company Model: Peabody BBL: 30 1/8 inch round Stock: walnut Gauge: 42 Russian Berdan Finish: blue/casehardened Serial Number3 Class: Antique

Lot: 113 - U.S. Martially Inspected Remington Type I Split Breech Carbine

Desirable Civil War Era U.S. Martially Inspected Remington Type I Split Breech Single Shot Saddle Ring Carbine 5,000 of these were manufactured for Remington under a sub-contract with Savage Arms Company with completed deliveries to the U.S. government from February through April 1865 per page 178 of "Flayderman's Guide, 9th Edition". This was the first Remington longarm to use metallic cartridges and the last contract arm supplied to the Federal government at the conclusion of the Civil War. The upper tang is marked "REMINGTON'S. ILION. N.Y./PAT. DEC. 23. 1863. MAY 3, & NOV. 16, 1864" and the serial number is marked on the front of the frame under the forearm. Small single letter inspector markings are: an "J" on the top of the barrel at the breech and on the rear sight leaf, the left side of the rear sight base, "D" on the buttstock tang, "B" on the lower tang and "C" on the ring bar base. The carbine had a blue 20 inch round barrel with a pinched blade front and folding two-leaf rear sight graduated to 500 yards. The casehardened receiver has a sling bar and ring on the left side. The stock and forearm are oil-finished black walnut with two clear cartouches on the left wrist. Manufacturer: E. Remington & Sons Model: Split Breech BBL: 20 inch round Stock: walnut Gauge: .46 Finish: blue/casehardened Serial Number5143 Class: Antique

Lot: 114 - U.S. Burnside/Springfield Spencer Model 1865/1871 Rifle

U.S. Burnside/Springfield Spencer Model 1865/1871 Conversion Repeating Infantry Rifle Spencer repeating rifles and carbines were by many accounts the best firearms of the Civil War and were highly regarded by the troops that received them. After the war, the U.S. Army was drastically reduced from well over a million men down to just 11,000-27,500 depending on the year. The government also had large stockpiles of various arms which required numerous types of ammunition. Naturally, the more troublesome or outdated arms were sold as surplus. The significant advantages of the Spencer led to many being retained, and in the immediate post-war years, Spencers remained widely used by the cavalry while many infantrymen were stuck with obsolete muzzle loaders. As the War Department tried to standardize the Army's weaponry, it made sense that the Spencers, especially those manufactured too late to see combat, were considered for conversion alongside the massive stockpiles of Model 1861 and 1863 rifle-muskets. 1,108 Spencers were chosen by the Springfield Armory for alteration to infantry rifles in 1871. The conversions consisted of replacing the short carbine barrels with 32 1/2 inch round barrels numbered to the guns with three groove rifling, .50 caliber bores, and blade, notch, and folding ladder sights. The short carbine forearms were replaced by musket length forends secured by two barrel bands, a forend cap, and a slotted cleaning rod. Stabler cutoffs were also added to allow use as single shot breech loaders while retaining the ability to use the ammunition reserve in the magazines if needed. The stocks retained the saddle rings and corresponding bars and had "ESA" oval cartouches. This example has all of these correct features and is fitted with a brown leather sling. Manufacturer: Burnside Rifle Co Model: 1865 BBL: 32 5/8 inch round Stock: walnut Gauge: 56-50 Spencer Finish: blue/casehardened Serial Number2543 Class: Antique

Lot: 115 - Remington No. 1 Military Pattern Saddle Ring Carbine

Very Fine Remington No. 1 Military Pattern Rolling Block Saddle Ring Carbine Manufactured c. 1867 to 1888, this is a very fine example of a military pattern Remington No. 1 Rolling Block saddle ring carbine. These military rifles and carbines were produced in very large numbers for both foreign and domestic contracts, most of which saw hard military use, leaving few high condition examples like this available for collectors. The upper tang has the standard three-line address and patent dates. It is fitted with a pinched blade front sight, two-leaf military style rear sight, and a saddle ring on the left of the receiver. It is mounted with a smooth forearm and straight grip stock with a military pattern buttplate. Manufacturer: Remington Arms Inc Model: Falling Block BBL: 20 1/2 inch round Stock: walnut Gauge: 43 Spanish Finish: blue/casehardened Serial NumberNSN Class: Antique

Lot: 116 - Colt Model 1851 Navy Richards-Mason Conversion Revolver

Outstanding Well-Documented Colt Model 1851 Navy Richards-Mason Conversion Revolver Manufactured c. 1873, this is a truly extraordinary example of an early production Colt Richards-Mason conversion revolver in rimfire configuration that remains in outstanding condition. According to Norm Flayderman, only approximately 3,800 of these conversion revolvers were produced during the mid-1870s, right around the time Colt released their now legendary Single Action Army revolver, both becoming legends of the American West. These Richards-Mason conversion represented a slightly more affordable option than the "Peacemaker" for those seeking to upgrade from a cap and ball percussion sidearm to the more advanced self-contained cartridge revolvers. Being an affordable and effective sidearm during a time when the western frontier remained very much untamed, these revolvers are typically seen in lower condition after seeing years of use in a harsh environment. Thus, exceptionally high condition examples like this one are extremely rare on today's collectors market. This outstanding revolver is featured on page 138 of "Fine & Historic Arms Annual" by the Texas Gun Collectors Association and Rock Island Auction Company as part of the Dr. Paul and Carla McCombs Collection and is also pictured on p. 224 of "A Study of Colt Conversions and Other Percussion Revolvers" by R. Bruce McDowell. In the latter book this revolver is noted as being an early production example that utilized a previously made percussion barrel that remained on hand at the factory. Also included are two letters and a hand-written invoice supporting the provenance of this revolver. This early production example lacks the external loading gate spring and two-line Richards-Mason patent dates on the left side of the frame that are seen on later production examples. The top of the barrel has single line Colt address, while the left of the frame is marked "COLTS/PATENT" and the "36CAL" marking is on the left rear of the trigger guard. The matching serial number is on the bottom of the frame, trigger guard, back strap, and cylinder. It is fitted with a brass cone front sight, a hammer notch rear sight, and a one-piece walnut grip. Manufacturer: Colt Model: 1851 Navy BBL: 7 1/2 inch round Gauge: 38 Rimfire Finish: blue/casehardened/silver Grips: walnut Serial Number597 Class: Antique

Lot: 117 - Excellent Colt 1861 Navy Richards-Mason Conversion Revolver

Excellent Well-Documented Colt Model 1861 Navy Richards-Mason Conversion Revolver In the mid-1870s, Colt produced a variety of "conversion" revolvers using remaining parts on hand from percussion revolver production along with newly manufactured cartridge revolver components at the same time the early Colt Single Action Army revolvers were being produced. This Model 1861 Navy revolver's serial number dates to 1864 in the percussion range. Dennis Adler in "Metallic Cartridge Conversions" notes that around 1,800 were converted for centerfire ammunition. He also stated: "The 1861 Navy has been called the most graceful and beautifully designed revolver ever produced. The size, balance and contours of the 1861 Navy make that assessment hard to dispute. As a cartridge conversion, it was perhaps an even better looking gun," and also, "The most elegantly styled of all Colt cartridge conversions is the 1861 Navy." He would thus no doubt find this revolver to be the most attractive of all Colt percussion revolvers extant given its remarkable condition. It is featured on page 138 of "Fine & Historic Arms Annual" by the Texas Gun Collectors Association and Rock Island Auction Company as part of the Dr. Paul and Carla McCombs Collection. This revolver was previously part of John H. Thillman's collection and Colt conversion display at the Fall 1987 Texas Gun Collectors Association Show which won one of the four Judges Choice Awards. Thillman noted that after the display, "Philip R. Philip of Philips Petroleum offered to buy the entire collection for his museum. As he said at the time to me that he had never seen better condition examples of the pistols." The revolver and 1851 Navy conversion SN 597 instead were sold to Kurt House and Bruce Bartlet in 1999. It features the classic German silver blade front sight and one-line New York address on the barrel, ejector rod on the right, the two-line 1871 and 1872 patent marking on the left, an "N" and "36 CAL" on the left side of the trigger guard, classic naval battle scene on the cylinder along with "585/751", "1751" on the loading gate, and "21751" visible on the barrel, frame, trigger guard, and back strap. The wedge is unnumbered. Manufacturer: Colt Model: 1861 Navy BBL: 7 1/2 inch round Gauge: 38 Long Colt Finish: blue/casehardened/silver Grips: walnut Serial Number21751 Class: Antique

Lot: 118 - Cased British Proofed Colt 1855 5A "Root" Pocket Revolver

Cased London Proofed Colt Model 1855 5A "Root" Percussion Pocket Revolver This .31 caliber Model 5A variant of Colt's Model 1855 "Root" revolver series was manufactured in 1862. 5 and 5A variant revolvers are known in the same approximate 2401-8000 serial range, with an approximate even number of each made, per page 154 of "The Book of Colt Firearms" by R.L. Wilson. The Model 5A has a 4 1/2 inch barrel length with a round loading lever having a navy type latch, whereas the 5 variant has a 3 1/2 inch barrel with a round lever having a ball latch. Features the two-line New York barrel address, a fluted cylinder with patent marking on one of the flutes, "31 CAL" marked on the right side of the frame beneath the hammer, and London proofs on the left forward area of the frame and alternating between the cylinders. Matching serial number marked on the barrel and butt. Includes a correct partitioned hardwood case containing an array of proper accessories, with a James Dixon & Sons powder flask, two cavity .31 caliber bullet mold marked "COLT'S/PATENT" on the sprue cutter, an "L" shaped combination tool, cleaning rod, Eley Bros cap tin, Hawksley oiler, key, and lead balls. Manufacturer: Colt Model: 1855 Root Pocket BBL: 4 1/2 inch round Gauge: 31 Finish: blue Grips: walnut Serial Number5027 Class: Antique

Lot: 119 - Colt Collectors Association Rampant Colt Bronze Award

2019 Frisco, Texas, Colt Collectors Association Show First Place Percussion Antiques Rampant Colt Bronze Award The image of the rearing colt with a broken lance in his mouth and front legs has become synonymous with Colt firearms. This bronze by Thomas Palmerton pays homage to that legendary emblem in a life-like form, standing atop the famous Colt dome. The bronze is presented on a wooden plinth with a plaque for Jim Eplen winning Colt Collectors Association's "First Place Percussion Antiques" award at the associations 2019 show in Frisco, Texas. Several of Mr. Eplen's fantastic Colts are featured in "Fine & Historic Arms Annual" by the Texas Gun Collectors Association and Rock Island Auction, including examples featured in this auction. The base is 6 3/8 inches in diameter and is 2 inches tall. The bronze measures 10 1/2 inches tall. Manufacturer: None Model: None Class: Other

Lot: 120 - Cased Colt Model 1849 Pocket Percussion Revolver

Cased Colt Model 1849 Pocket Percussion Revolver Manufactured in 1856. The Model 1849 Pocket was the most popular of all of Colt's percussion revolvers. During the Civil War, many were carried as personal sidearms. The revolver has a brass cone shaped front sight on the barrel, integral hammer notch rear sight, loading lever and a five-shot cylinder. The cylinder is roll-engraved with the stagecoach holdup scene. The top of the barrel has the two-line Colt New York address. All matching full and partial visible serial numbers are marked on the barrel, frame, trigger guard, butt, cylinder, loading lever, cylinder arbor pin and wedge. Includes a partitioned red felt lined hardwood case containing a double sided eagle and crossed revolvers powder flask, "COLTS/PATENT" marked two-cavity .31 caliber brass bullet mold, Eley Bros cap tin with green label (label half absent), a blued "L" shaped combination tool (one chipped edge), and two keys. Manufacturer: Colt Model: 1849 BBL: 4 inch octagon Gauge: .31 Finish: blue/casehardened Grips: walnut Serial Number112843 Class: Antique

Lot: 121 - Serial Number 10 Fluted Cylinder Colt Model 1860 Army Revolver

Extremely Scarce and Well-Documented "No-Patent" Two-Digit Serial Number "10" Fluted Cylinder Colt Model 1860 Army Percussion Revolver This very early Model 1860 Army revolver was manufactured in 1860 and has a variety of scarce features, including the absence of several of the standard markings, including the patent marking on the frame. The "No-Patent" revolvers, including this specific

Lot: 122 - Colt Third Model Dragoon Percussion Revolver with 8 Inch Barrel

Colt Third Model Dragoon Percussion Revolver with Very Scarce 8 Inch Barrel The revolver was manufactured in 1860 and is one of the few known Dragoon revolvers in the 18000 and 19650 serial number range with an 8 inch barrel rather than the usual 7 1/2 inch, apparently based on recommendations from the Army Board of Ordnance. Late production Colt Third Model Dragoon revolvers were widely used during the Civil War, and Colt Dragoons were especially popular with Confederate cavalry. The revolver has the distinctive combination of oval brass trigger guard and cylinder with rectangular stops that identify Third Model Dragoon revolvers. It features a German silver blade front sight, "ADDRESS SAML COLT NEW YORK CITY" on top of the barrel, "COLTS/PATENT" on the left side of the frame, the Texas Rangers and Comanche battle scene on the cylinder, a varnished walnut grip, the matching partial serial number "8475" on the wedge, arbor pin, loading lever, and rear grip mortise; and the matching serial number on the barrel, frame, trigger guard, and back strap. The cylinder has been numbered to match. Manufacturer: Colt Model: Dragoon BBL: 8 inch part round Gauge: .44 Finish: blue/casehardened/brass Grips: walnut Serial Number18745 Class: Antique

Lot: 123 - Captain Whiteley's Presentation Colt Root with Charter Oak Grip

Very Fine and Extremely Historic Recently Discovered Cased Factory Presentation Engraved Colt Model 1855 “Root” Pocket Percussion Revolver with Extremely Rare Charter Oak Grip and Inscription for U.S. Ordnance Inspector Captain R. H. K. Whiteley Samuel Colt's "New Model Pocket Pistol," generally known to collectors as the Model 1855 Pocket or "Root" revolver after Elisha K. Root, is

Lot: 124 - Colt Paterson Model 1839/1848 Percussion Revolving Carbine

Rare Colt Paterson Model 1839/1848 "Albert Foster Model" Percussion Revolving Carbine The Model 1839 carbines were the most popular of Samuel Colt's Paterson long guns and remained in Colt's inventories into the early 1850s prior to the introduction of the Model 1855 revolving rifles. According to page 217 of "The Paterson Colt Book" by Wilson, in addition to approximately 250 sold on the commercial market, 300 were purchased for the U.S. Navy along with 60 for the U.S. Dragoons, 180 were purchased for the Texas Navy along with 120 for the Texas Army and Rangers, and the State of Rhode Island purchased 24. As detailed on page 213 of "The Paterson Colt Book," Rhode Island also purchased carbines from John Ehlers. Samuel Colt repurchased "not more than fifty" of these carbines c. early spring 1848 as he was reviving his firearms business and "modernized the majority of these by having the cylinders turned down, leaving them bright and without cylinder roll scenes, altered the revolving mechanism by threading the breech and inserting a plug machined with ratchets, and then altering the breech of the receiver accordingly. The barrels were refinished through a careful polish and re-browning, mountings and receivers were reblued or re-casehardened, and the buttstocks were varnished." Some of these carbines are believed to have been the carbines exhibited by Colt at the Crystal Palace at the Exhibition of the Industry of All Nations in New York City in 1853, and some remained in Colt's collection and then the factory collection for many years thereafter. Collectors used to believe these carbines had been built by Colt's New York Sales Manager Albert Foster Jr. in the early 20th century. This rare carbine has the matching serial number "413" on the bottom of the barrel at the breech, rear of the cylinder, front of the hammer, left side of the recoil shield, on the backside of the trigger guard extension, and the toe of the buttplate. The barrel has a German silver cone front sight and a notch rear sight and is marked with "~*Patent Arms M'g. Co. Paterson, N.J.-Colt's Pt. *~" on the right side. The wedge is marked "50". Sling swivels are mounted to the underside of the barrel and buttstock. The buttstock has a double stamped "JRHJR" cartouche indicating the carbine belonged to John R. Hegeman Jr. who was a pioneer in Colt collecting and apparently had great connections within the Colt company that afforded him the opportunity to own many pre-production prototype and serial number 1 guns in the early 20th century. Thus, this is almost certainly one of the carbines that remained in the factory collection for decades. Another Paterson carbine, serial number 525, also in Hegeman's collection and similarly marked with his cartouche was previously sold by Rock Island Auction Company. Manufacturer: Colt Model: 1839 BBL: 24 3/8 inch part round Stock: walnut Gauge: 32 Finish: brown/bright/blue/casehardened Serial Number413 Class: Antique

Lot: 125 - Ehlers Improved Colt Paterson Belt Model No. 2 Revolver

Colt Paterson Improved Belt Model No. 2 (Ehlers Fifth Model) Percussion Revolver This Belt Model No. 2 revolver was manufactured by Colt in 1836-1840 in Paterson, New Jersey, and later completed and sold by former Patent Arms Manufacturing Co. secretary and treasurer John Ehlers in the 1840s after the company failed. These revolvers had improvements over the earlier Patersons that were later seen on Colt's revolvers such as the capping cutout, loading levers, and rounded back cylinders rotated by a hand and ratchet. In 1845, Ehlers was advertising in The Evening Post that he had "Colt's Repeating Pistols, Carbines and Shot Guns" available for sale at 171 Broadway in New York City. The advertisement noted the pistols had "the latest Improvements of 1843 and 1844" which included the rammer and stated "Colt's Patent, Pocket, Belt and Holster Pistols, with the rammer attached, is the latest and most approved of improvement in fire arms, and for safety, sure fire accuracy and distance, they are inferior to none." He even claimed the shorter pistols could effectively be fired with only a cap and ball and no powder. These scarce revolvers helped maintain interest in and satiate some of the demand for Colt's revolvers between the failure of the company in New Jersey, and its rebirth in Connecticut in 1847. This pistol has a short barrel marked with the "-Patent Arms Paterson N-J Colt's Pt-" on top. As an Ehlers Model, the marking correctly lacks the "M'g Co" and has a space where the marking was removed from the die. The cylinder is roll-engraved with the centaur scene and "COLT" four horsehead motif. The hammer has coarse knurling on the spur. Matching serial number "159" is marked on the wedge, loading lever, barrel lug, rear of the cylinder, the frame below the cylinder, grip under the back strap, and right side of the grip straps. Manufacturer: Colt Model: Paterson BBL: 4 inch octagon Gauge: .34 Finish: blue Grips: walnut Serial Number159 Class: Antique

Lot: 126 - Cased Set of Factory Engraved Colt London Percussion Revolvers

Well-Documented and Scarce Cased Set of Deluxe Factory Engraved Colt London Model 1851 Navy and Model 1849 Pocket Percussion Revolvers with Inscribed Initials -A) Colt London Model 1851 Navy Revolver Well-Documented and Scarce Cased Set of Deluxe Factory Engraved Colt London Model 1851 Navy and Model 1849 Pocket Percussion Revolvers with Inscribed Initials -A) Colt London Model 1851 Navy Revolver

Lot: 127 - Cased Louis Brasch Colt Model 1851 Navy Percussion Revolver

Excellent Cased Colt Model 1851 Navy Percussion Revolver with No Patent Marking, Deluxe Grip, "Louis Brasch" Inscription, and R. L. Wilson Letter This incredibly high condition Colt Model 1851 Navy was manufactured in 1863 and is inscribed "Louis Brasch" along the back strap. According to the included letter from R. L. Wilson, Louis Brasch is listed in the Hartford directories as a basket-maker.

Lot: 128 - Cased Early Factory Engraved Colt Model 1849 Pocket Revolver

Exceptional Cased Early Factory Engraved Colt Model 1849 Pocket Percussion Revolver This revolver was manufactured in 1852, the same year engraver Thomas J. Barlow contacted Samuel Colt about employment. He engraved for Colt for a brief period c. mid 1852- early 1854, and this style of engraving has been attributed to Barlow based on his prior work with Blunt & Syms in New York as discussed in "Colt Engravers of the Nineteenth Century" by Herbert G. Houze. The engraving covers the rear 1/3 of the barrel, the side flats of the loading lever arm, the frame, the hammer, the trigger guard bow, and the top and bottom of the back strap. Most of the engraving consists of scroll engraving with tighter "donut scroll" designs than the work of the German immigrant engravers soon after employed by Colt and has crosshatched backgrounds. The hammer has a bestial mask motif. The "COLTS/PATENT" marking on the frame is inscribed within a banner, and "Saml Colt" is inscribed on the top of the barrel in script. The revolver features post and hammer notch sights, the stagecoach hold-up scene on the cylinder, matching serial numbers on the wedge, arbor, cylinder, loading lever arm, barrel, frame, trigger guard, back strap, and grip; the factory punchdot marking by the main serial numbers denoting factory engraving, and varnished walnut grip. It comes in a fitted case with an early style "COLTS/PATENT" brass bullet mold without sprue cutter, Eley Bros. cap tin, cartridge pack, L-shaped combination tool, and a "COLT'S PATENT" marked Great Seal of the U.S. themed powder flask. Manufacturer: Colt Model: 1849 BBL: 5 inch octagon Gauge: .31 Finish: blue/casehardened/silver Grips: walnut Serial Number46915 Class: Antique

Lot: 129 - Exceptional Cased Colt Model 1862 Police Percussion Revolver

Exceptional Cased Colt Model 1862 Police Percussion Revolver Samuel Colt's New Model Revolving Police Pistol came out just in time for the American Civil War and would have been an excellent sidearm for a police officer in one of the new police departments popping up in cities across the country or as a private sidearm for a soldier. They were generally referred to as Colt's New Model Police Pistol or just Police Pistol in the period and have been called the Model 1862 Police and the Pocket Police by collectors and are considered by many to be the most attractive of all of Colt's percussion revolvers. Because they were designed to be great carry guns, they are hard to find in high condition, and this revolver is certainly among the very best extant. This stunning example was manufactured in 1861 and has the standard markings, including all matching serial numbers. The case contains a cap tin, cartridge pack marked for "Colt's New Model Revolving Police Pistol," some balls and bullets, a "36 P" marked blued Colt bullet mold, L-shaped combination tool, and an eagle pattern pocket flask. Manufacturer: Colt Model: 1862 BBL: 6 1/2 inch round Gauge: .36 Finish: blue/casehardened/silver Grips: walnut Serial Number7189 Class: Antique

Lot: 130 - Very Scarce London Agency Cased Colt Model 1861 Navy Revolver

Very Scarce London Agency Cased Colt Model 1861 Navy Percussion Revolver The Colt Model 1861 Navy revolver, officially known as the "New Model Navy or Belt pistol," is among the hardest of the Colt percussion revolvers to acquire. Only 38,843 were manufactured compared to approximately 200,500 Model 1860 Army revolvers. They are justly considered to be among the most attractive of all Colt percussion revolvers and are a streamlined version of the iconic Colt Model 1851 Navy which was one of Colt's most popular revolvers. The grip design and barrel length was adopted when Colt developed the Single Action Army. This very attractive example was manufactured in 1863 during the American Civil War and is especially rare as it was factory designated to be sent to Colt's London Agency as signified by the "L" markings stamped either above or below the serial numbers along the underside of the revolver. It also features London proof marks, and the English style case has a Colt London Agency directions label. Very few of these were sent abroad given high domestic demand during the Civil War. Jim Eplen noted: "English 1861 Navies are rare! I have never seen or held a London addressed 1861 Navy, and I am not sure they exist. I have seen only eight others like this one." We have also only seen a limited number, and very few remain in high condition and cased. R. L. Wilson on page 167 of "The Book of Colt Firearms" also confirmed: "A limited number of round barrel Navy revolvers were sold through Colt's London Agency..." The revolver features the distinctive 7 1/2 inch round barrel with the improved loading lever, German silver blade front sight, the one-line New York barrel address, and London proof marks on the left below the wedge. The cylinder has the iconic naval battle scene and alternating London proof marks between the chambers. The left side of the frame has "COLTS/PATENT", and the left side of the trigger guard is marked "36 CAL". Matching serial numbers are visible on the cylinder, barrel, frame, trigger guard, and back strap. The oak case has green baize lining, the noted directions label with the "14, PALL MALL, LONDON, S.W." address, a cleaning rod, L-shaped combination tool, blued "36 B" marked Colt bullet mold, Eley Bros. cap tin marked for "COLT'S PT./Belt and Pocket/PISTOLS", James Dixon & Sons "COLT'S NAVY FLASK" and oiler, and a key. Manufacturer: Colt Model: 1861 Navy BBL: 7 1/2 inch round Gauge: 36 Finish: blue/casehardened/silver Grips: walnut Serial Number12424 Class: Antique

Lot: 131 - Civil War Cased Factory Engraved Colt Model 1862 Police Revolver

Very Fine Well-Documented Civil War Era Cased Factory Engraved Colt Model 1862 Police Percussion Revolver Samuel Colt's "New Model Revolving Police Pistol" came out just in time for the American Civil War and would have been an excellent sidearm for a police officer in one of the new police departments popping up in cities across the country or as a private sidearm for a soldier. The Pocket Police offered more firepower in a package the same size as the extremely popular Model 1849 Pocket and featured a round barrel and toothed loading lever like the full-sized Model 1860 Army revolver and a very attractive fluted and stepped cylinder. They are considered by many to be the most attractive of all of Colt's percussion revolvers. Because they were designed to be great carry guns, they are hard to find in high condition, and this revolver is certainly among the very best extant, especially when you consider the exceptional Gustave Young style factory engraving and the fact that it is featured on page 187 of "The Colt Engraving Book Volume One" by Wilson in the chapter on Gustave Young. This stunning revolver was manufactured in 1862 during the Civil War. The engraving consists of elaborate flowing scroll engraving with beaded backgrounds, fan accents, and a wolf head on the hammer. Aside from the engraving and the varnished select walnut grip, the revolver has the standard markings, including matching partial or full serial numbers on the wedge, arbor, cylinder, barrel, frame, trigger guard, back strap, and grip. "2" is marked on the breech face of the barrel as well as above or below the main serial number locations. The mahogany case contains a cap tin, small Great Seal of the U.S. themed powder flask, a "36 B" marked blued Colt ball/bullet mold, and several lead balls. Manufacturer: Colt Model: 1862 Police BBL: 4 1/2 inch round Gauge: .36 Finish: blue/casehardened/silver Grips: walnut Serial Number8819 Class: Antique

Lot: 132 - Early Two-Digit Serial Number "55" Colt Model 1860 Army Revolver

Extremely Rare Early Production Two-Digit Serial Number "55" Colt Model 1860 Army Percussion Revolver with Navy Size Grip This extremely rare revolver, bearing serial number 55, was manufactured in 1860 in the first days of production of the famous Colt Model 1860 Army revolver. This is one of only approximately 55 of the first 100 Model 1860 Army revolvers factory made with a round rebated cylinder, three screw frame NOT cut for a shoulder stock, a Hartford barrel address, silver plated back strap and trigger guard assembly, the shorter 7 1/2 inch barrel and Navy size grip per page 163 of "The Book of Colt Firearms" by R.L. Wilson. An included Texas Gun Collectors Association Certificate of Authenticity also lists it as featuring the navy size grip and 7 1/2 inch barrel and also notes that it is "completely original in every respect." The first 100 Model 1860 Army revolvers also do not have capping channels in the recoil shield cutouts as seen in this example. Serial number 50 previously sold by Rock Island Auction Company (lot 3204, December 2024) and serial number 35 (lot 1113, December 2016) both also have an early round cylinder, and serial number 72 (lot 1258, September 2018) has a fluted cylinder. The revolver has a German silver blade front sight, "-ADDRESS SAML COLT HARTFORD CT.-" on top of the barrel, small "COLTS/PATENT" marking on the left side of the frame, the noted Model 1851 Navy sized brass grip frame with silver plated finish and small single letter inspection marks on the left side of the trigger guard, and a smooth varnish finished walnut grip. The matching two-digit serial number "55" is marked on the loading lever, barrel, wedge, cylinder, cylinder arbor pin, frame, trigger guard, butt, and correctly handwritten in black ink inside the grip mortise. Manufacturer: Colt Model: 1860 Army BBL: 7 1/2 inch round Gauge: .44 Finish: blue/casehardened/silver Grips: walnut Serial Number55 Class: Antique

Lot: 133 - Two-Digit Serial Number "43" Colt Model 1861 Navy Revolver

Extremely Early Production Two-Digit Serial Number "43" Colt Model 1861 Navy Percussion Revolver The Model 1861 Navy is certainly one of the most attractive Colt percussion revolvers and was manufactured in comparatively limited numbers making them particularly desirable. Only around 38,000 were manufactured c. 1861-1873 compared to over 200,000 of the similar Model 1860 Army revolvers. This example was manufactured very early in the first year of production, 1861. The matching two-digit serial number "43" is marked on the cylinder, arbor pin, wedge, barrel, frame, trigger guard, back strap, and grip. The barrel features a German silver blade front sight, "-ADDRESS COL. SAML COLT NEW-YORK U.S. AMERICA-" marked on top, and a "2" on the left at the junction with the frame. The cylinder has the iconic Naval Battle of Campeche roll-scene. "COLTS/PATENT" is marked on the left side of the frame. There is no capping groove in the cutout. Manufacturer: Colt Model: 1861 Navy BBL: 7 1/2 inch round Gauge: .36 Finish: blue/casehardened/silver Grips: walnut Serial Number43 Class: Antique

Lot: 134 - U.S. Colt Model 1861 Navy Percussion Revolver & Cartridge Pouch

Extremely Rare Martially Inspected U.S. Civil War Contract Colt Model 1861 Navy Percussion Revolver with Cartridge Pouch This extraordinary rare martially inspected U.S. Colt Model 1861 Navy revolver was manufactured in 1862 as part of a 2,000 gun contract with the Ordnance Department signed on April 13, 1861. Although the Ordnance Department subsequently purchased 363 additional Model 1861 Navy revolvers from Colt distributors, the 2,000 pistols purchased under the April 1861 contract were the only Ordnance inspected, military finished Model 1861 Navy revolvers manufactured by Colt during the Civil War. After the U.S. contract Walker revolvers, the U.S. contract Model 1861 Navy revolvers are the rarest U.S. martial Colt percussion handguns. This revolver has the Colt military finish with low-polish blue barrel and cylinder, color casehardened loading lever, frame and hammer; natural brass trigger guard and back strap, and oil-finished walnut grip. The wedge, screws, and trigger are nitre blue. The barrel has a nickel-sliver front sight, and the hammer has a sight notch and hand-knurled spur. The top of the barrel is roll-stamped with the legend: "-ADDRESS COL. SAML COLT NEW-YORK U.S. AMERICA-" reading toward the breech. The cylinder is roll-stamped with the Naval Battle of Campeche scene with "ENGAGED 16 MAY 1843." on the leading edge. "COLTS PATENT NO." and the partial serial number "132" are stamped on the cylinder center-line. "COLT'S/PATENT" is stamped in two lines on the left side of the frame. The matching partial serial number "132" is also marked on the wedge and cylinder pin and handwritten in rear mortise of the grip. The full matching serial number "6132" is stamped on the bottom of the barrel lug, frame, trigger guard, and back strap. The lower left side of the grip is stamped with an Ordnance inspector cartouche. Small "B" Ordnance sub-inspection marks are stamped on the right side of the barrel lug and side and back of the cylinder. A "C" inspection mark is on the left side of the barrel at the breech, and an "F" is on the right. The side of the cylinder has "L" and "F" inspection marks. An "L" inspection mark is stamped on the top of the back strap, and an "S" is marked just behind the trigger guard bow. An "A" inspection mark is stamped on the butt of the grip on the left. A black leather cartridge pouch with an asterisk marked on the back is included. Manufacturer: Colt Model: 1861 Navy BBL: 7 1/2 inch round Gauge: .36 Finish: blue/casehardened/brass Grips: walnut Serial Number6132 Class: Antique

Lot: 135 - Historic Sharps Model 1852 Slant Breech Saddle Ring Carbine

Historic Sharps Model 1852 Slant Breech Percussion Saddle Ring Carbine, Civil War Inscribed to J.W. Campion, 81st Pennsylvania Volunteers This Sharps Model 1852 carbine features a fancy Civil War era inscription on the patch box consisting of the name "J.W. Campion" above a detailed hand with its finger pointing towards the sky surrounded by "GOD AND OUR COUNTRY" above "81 Penna Volls." John W. Campion was previously reported as having been a wealthy supporter of the Pennsylvania volunteers and reportedly presented them "bullet proof" vests and other items and was said to have received this carbine as a result. We have not been able to find more information on this individual, but there were several men in Philadelphia in the period by the same name in various trades and businesses. The 81st Pennsylvania Volunteer Infantry Regiment was organized under Colonel James Miller and Lieutenant Colonel Charles F. Johnson, in 1861 out of Philadelphia, moved to Washington, D.C. and attached to Howard’s Brigade, Sumners Division, Army of the Potomac. In March 1862 they attached to the 1st Brigade, 1st Division, 2nd Army Corps, Army of the Potomac. The 81st Pennsylvania Regiment participated in numerous engagements throughout the Civil War including the Siege of Yorktown, Battle of Seven Pines, Seven Days Battles, Battle of Antietam, Battle of Fredericksburg, Battle of Chancellorsville, Battle of Brandy Station, Battle of Gettysburg, Bristoe Campaign, Battle of Mine Run, Battle of the Wilderness, Battle of Spotsylvania Court House, Battle of Totopotomoy Creek, Battle of Cold Harbor, Siege of Petersburg, Second Battle of Petersburg, First Battle of Deep Bottom, Second Battle of Deep Bottom, Second Battle of Ream's Station, Battle of Fort Stedman, and the Battle of Appomattox Court House. Approximately 4,997 Sharps Model 1852 carbines were manufactured between 1853-1855 by Robbins & Lawrence of Windsor, Vermont, for Sharps before production shifted to the very similar Model 1853. This is the earliest Sharps model with the distinctive "slanting breech" and is fitted with the lever hinge pin retaining spring mounted on the right rear of the forearm. The top of the barrel is marked "SHARP'S RIFLE/MANUFg CO./HARTFORD. CONN." in three lines behind the rear sight. The upper receiver tang is marked "C.SHARPS/PATENT/1848" followed by the serial number, and the lock is marked "C.SHARPS'/PATENT./1852." Brass blade front and ladder rear sight. Saddle ring mounted on the left of the receiver. Mounted with a smooth forearm and straight grip stock with brass patch box and carbine buttplate. Matching serial number "6536" marked on the upper receiver tang, underneath the barrel, in the forend channel and on the front flat of the buttstock. Manufacturer: Sharps Rifle Manufacturing Company Model: 1852-Carbine BBL: 21 1/2 inch round Stock: walnut Gauge: 52 Finish: blue/casehardened Serial Number6536 Class: Antique

Lot: 136 - Exceptional Civil War Burnside Fifth Model 1864 Carbine

Exceptional Civil War U.S. Burnside Fifth Model 1864 Breech Loading Percussion Saddle Ring Carbine This is an exceptional example of a 4th Model, Burnside Carbine manufactured by the Burnside Rifle Co. in Providence, Rhode Island. The 5th Model Carbines were the model purchased by the Ordnance Department in the largest quantities, with approximately 43,000 manufactured between 1864-1865. The 5th Model carbine is distinguished from earlier models by the presence of a guide screw hole in the center of the right side of the frame. The frame, hammer, lever release, barrel band, and buttplate are casehardened and the remaining parts are blue. The top of the frame is marked "BURNSIDE PATENT/MODEL OF 1864" over the serial number. The matching serial number is marked on the top of the breech block. The top of the barrel ahead of the rear sight is marked "CAST STEEL 1864" and the lock is marked "BURNSIDE RIFLE Co./PROVIDENCE, R.I." There is a small "B" sub-inspectors mark on the top breech end of the barrel, left front of the frame, saddle ring bar base, bottom of the lever assembly and on both tangs, a "M" on the hammer and buttplate tang, and "MM" on the lever assembly. Pinched blade front and two folding leaf rear sights, saddle ring bar and ring on the left side of the receiver and mounted with a smooth forearm and straight grip stock with an iron carbine buttplate and sling swivel. The left stock wrist has two crisp boxed cartouches and small three letter inspection stamps on the bottom, rear of the forearm and stock directly ahead of the buttplate tang. Manufacturer: Burnside Rifle Co Model: Burnside-Carbine BBL: 21 inch round Stock: walnut Gauge: .54 Finish: blue/casehardened Serial Number14851 Class: Antique

Lot: 137 - Civil War Era E. G. Lamson & Co. Palmer Bolt Action Carbine

Excellent and Scarce Civil War Era E. G. Lamson & Co. Palmer Bolt Action Saddle Ring Carbine The Palmer carbine holds the distinction of being the first metallic cartridge bolt action firearm ever adopted by the U.S. Ordnance Department. The bolt does not contain a firing pin and is simply used to seat the cartridge and seal the breech. It fires with a traditional side lock. Approximately 1,001 of these carbines were ordered on contract by the U.S. government late in the Civil War but were delivered too late to see action. It has small "M.M" (Miles Moulton) inspector initials on the left of the breech, left stock flat and top of the stock ahead of the buttplate tang, and a circled script "MM" inspection cartouche on the left stock flat. Manufacturer: E.G. Lamson & Co. Model: Palmer Carbine BBL: 20 inch round Stock: walnut Gauge: .50 Finish: blue/casehardened Serial NumberNSN Class: Antique

Lot: 138 - Civil War Era Second Model Paris LeMat "Grapeshot" Revolver

Civil War Era Second Model Paris LeMat Two-Barrel "Grapeshot" Percussion Revolver Identified to John F. Miller with Family Provenance Manufactured in Paris, France c. 1864-1865. Production LeMat revolvers in their various forms were manufactured in Liege, Paris and Birmingham between 1856-1865 with total production estimated at fewer than 2,900 revolvers per page 643 of "Flayderman's Guide, 9th

Lot: 139 - D-Guard Short Sword of Confederate General James Kemper

Historic Civil War Era "J.L.K" Inscribed D-Guard Short Sword Identified to Confederate General James Lawson Kemper with Sheath and Family Provenance This impressive Civil War era Confederate D-Guard short sword has a sturdy curved blade terminating in a point, a walnut grip, and a rugged metal handguard which lends the D-Guard its name. The initials "J.L.K" are deeply period inscribed on the D-guard, identified as the initials of Confederate General James Lawson Kemper. A few typewritten letters of provenance from 2000 are included, addressed from Howard Reed, a direct descendant of Private James Martin who served in General James L. Kemper’s Brigade of Pickett’s Division. One of the letters states, "This sword has been passed down in my family since the Civil War. My grandfather's daddy died when my grandfather was only 12 years old in 1926. His daddy's parents were still living and as they later went through his belongings they came upon this sword in his trunk, about which he inquired. They said we had an ancestor that was fighting along side of General Kemper at the Battle of Gettysburg, when Kemper was shot down off his horse. Our ancestor actually assisted in bearing General Kemper off the battlefield. General Kemper believing he was going to die, gave our relative his sword. Our relative carried the sword to the end of the war and it was handed down in our family." An account told by a soldier of General James L. Kemper related to what may have been this very D-Guard knife is on page 159 of the included book "The Confederacy's Forgotten Son" in which it states, "One such story told of the battle of the Seven Pines, where in his shirt sleeves, covered with mud, with his crescent shaped sword in hand, Kemper called out to his men, 'Come on, my bloody heroes! Charge! Send these Devils to Hell!'" The knife measures approximately 22 inches in overall length with a 16 inch heavy curved blade measuring just over 1/4 inch thick towards the bottom. Includes a leather wrapped metal sheath. Manufacturer: None Model: None Class: Other

Lot: 140 - Civil War Confederate Courtney & Tennent Imported Naval Cutlass

Exceptional Civil War Confederate Courtney & Tennent Imported Naval Cutlass with Scabbard This Confederate Naval Cutlass was manufactured by Robert Mole & Son's of Birmingham, England, and imported by Courtney & Tennent of Charleston, South Carolina. These are one of the finest cutlasses ever produced for the Confederate Navy. Features a double-edged 20 inch wasp wristed blade with single fuller. The obverse ricasso is stamped "COURTNEY & TENNENT/CHARLESTON, S.C" in a rectangle. Some examples are known to be marked with the maker name of Mole, this example is not. The cutlass has a two-branch brass guard with down-turned quillian and two-piece checkered hard rubber grip. Includes a leather scabbard with brass ends. These Courtney & Tennent Naval Cutlasses are described on pages 61-63 of the book "A Photographic Supplement of Confederate Swords" by William A. Albaugh III and on page 39 of "Confederate Edged Weapons" by William A. Albaugh III. Manufacturer: None Model: None Class: Other

Lot: 141 - U.S. Colt Special Model 1861 Contract Percussion Rifle-Musket

Fine Civil War U.S. Colt Special Model 1861 Contract Percussion Rifle-Musket Approximately 100,000 of these rifle-muskets were manufactured by Colt during the Civil War per page 119 of "Flayderman's Guide, 9th Edition". These are loosely based on the British Pattern 1853 "Enfield" rifle-muskets, and some of the design elements were used on the Springfield Model 1863 rifles. "1864" dated barrel and lock, Colt Hartford address marking on the lock, eagle and shield emblem on the bolster, "V/P/eagle head" proofs, "STEEL" and "M.N.M" inspection initials at the left of the breech, "AWM" and "JT" (John Taylor) boxed script inspection cartouches stamped on the left stock flat, and "US" marked buttplate. Manufacturer: Colt Model: 1861 BBL: 40 inch round Stock: walnut Gauge: 58 Finish: bright Serial NumberNSN Class: Antique

Lot: 142 - Savage Presentation Ames Model 1850 Field Officer's Sword

Historic Presentation Ames Model 1850 Staff & Field Officer's Sword with Scabbard Inscribed to Lieutenant Edward B. Savage of the 24th Connecticut Infantry Regiment from His Associates at the Savage Armory with Framed Portrait and Silver Medal This Ames Model 1850 Staff & Field Officer's sword's blade measures 31 inches from tip to hilt and features a bright blade with fine etching showing

Lot: 143 - Presentation Grade Sword with Columbia Carved Ivory Hilt

Documented Historic Post-Civil War Presentation Grade Sword with Extraordinary Columbia Raised Relief Carved Ivory Hilt Inscribed to S.A. Raymond of Yale College by Major William Beatty The sword has a 32 inch lightly curved blade with scroll and patriotic etching, the W. Clauberg maker's mark on the left ricasso, and "IRON PROOF" etched on the spine. The guard has a panoply of arms theme and flanked by "U" and "S" and is formed on both the outside and the inside of the guard. The grip has a finely executed carved rendition of Columbia and floral borders. Columbia's bust is featured on the back of the pommel. The scabbard has floral pattern fittings and engraved oak leaf and acorn patterns on the body. Between the suspension bands it is inscribed with: "Presented to/S.A. Raymond/Student of Yale College in testimony of his being the most/skillful swordsman, and one of the most accomplished/gentlemen in his Class of [blank]/by Maj. Wm. Beatty." Samuel Atwater Raymond (1845-1915) of Cleveland, Ohio, is listed in the Class of 1870 and won second prize in Major William Beatty swordsmanship class in 1867 as a freshman. This was the highest placement from his graduating class. First prize went to Henry Warren Raymond (1847-1925), son of the co-founder of the New York Times, in the Class of 1869. The two do not appear to be close relatives. Beatty is listed as a former officer in the U.K. Royal Army until 1862 and as an instructor for officer's of the U.S. Army in 1862-1865. Following the war, he taught a broadsword exercise class at Yale in 1866-1867. The prize swords were recorded in "The Yale Courant" on Jan. 9 and 30, 1867. After Yale, S.A. Raymond continued in his father's business, Raymond Lowe Company, along with his brother Henry until 1878. Their father drowned in a steamboat explosion in 1866. Raymond married Emma Stone in 1875. She was the niece of industrialist Amasa Stone, the richest man in Cleveland, and lived with her uncle's family after the loss of her parents. Through this marriage, Raymond became an adjutor for the multi-millionaire, and after Stone's death, Raymond administered the vast estate. Manufacturer: None Model: None Class: Other

Lot: 144 - Civil War U.S. Amoskeag Lindner First Type Carbine

Scarce and Exceptional Civil War U.S. Amoskeag Manufacturing Company First Type Lindner Breech Loading Percussion Saddle Ring Carbine Approximately 500 of these First Type Lindner carbines are reported to have been delivered on a U.S. government contract in January of 1863 per pages 88-95 of "Lindner Carbines and Rifles" by Edward Hull. They are the design of Edward Lindner and manufactured by Amoskeag Manufacturing Company of Manchester, New Hampshire. 297 of these are reported to have been issued to the 8th West Virginia Mounted Infantry, who used them in skirmishes against Confederate forces between August and November of 1863. The breech block is marked "EDWARD LINDNER'S/PATENT,/MARCH 29, 1859" on top, with a locking "screw-sleeve" ahead of it. It has a fixed blade front sight and flip-up two-leaf rear sight. The lock, trigger guard, buttplate, and stock all resemble the fittings on the U.S. Special Model 1861 Rifle-Musket then in production by Amoskeag. Inspection initials "GKJ" are stamped on the left stock flat, and an oval bordered script font inspection cartouche is stamped on the top of the stock ahead of the buttplate. A saddle ring is mounted on the left of the stock. Period upside down carved initials "WHB" and punch dot markings are on the right of the buttstock. Manufacturer: Lindner Model: Carbine BBL: 20 inch round Stock: walnut Gauge: .54 Finish: bright Serial NumberNSN Class: Antique

Lot: 145 - Joslyn Model 1855 "Monkey Tail" Breech Loading Carbine

Very Scarce Joslyn Model 1855 "Monkey Tail" Breech Loading Percussion Saddle Ring Carbine Less than 1,500 of these Joslyn "Monkey Tail" carbines are estimated to have been manufactured between 1855 and 1856 by Asa H. Waters of Millbury, Massachusetts, with 1,200 known to have been purchased by the U.S. government per page 625 of "Flayderman's Guide, 9th Edition". These are known to have been issued to the 2nd, 3rd, 4th, and 6th Ohio Cavalry regiments in limited numbers. They are significant as the last firearms manufactured by Asa H. Waters. The Waters family had been involved in U.S. martial arms contracts since at least the 1808 contract muskets. Features a large pinched blade front sight, ladder rear sight, and a left mounted saddle bar and ring. "A.H. WATERS & Co/MILBURY MASS" marked on the lock, "PATd BY/B.F.JOSLYN./AUG.23.1855" marked on top of the breech block in reference to inventor Benjamin F. Joslyn. "A3" marked on the left of the breech block, and "A" on the right of the brass barrel band. Manufacturer: Waters A.H. Model: 1855 Joslyn Patent Carbine BBL: 22 1/2 inch round Stock: walnut Gauge: .54 Finish: blue/casehardened Serial NumberNSN Class: Antique

Lot: 146 - Fine Civil War U.S. Joslyn Model 1864 Saddle Ring Carbine

Fine Civil War U.S. Joslyn Model 1864 Saddle Ring Carbine This is one of 8,000 Model 1864 Joslyn breech loading carbines purchased by the Ordnance Department from the Joslyn Fire Arms Company of Stonington, Connecticut. The Joslyn was one of the more widely used carbines during the Civil War and was an effective and popular firearm with federal cavalry units. Union cavalry units that used the Joslyn included the 4th and 8th Indiana, 19th New York, 13th Tennessee, 9th Pennsylvania, 3rd West Virginia, 2nd Wisconsin, and 1st Nebraska. Deliveries of the carbine were made throughout the course of the war. The carbine has a blue barrel and casehardened iron mountings and a one piece straight grip stock with saddle ring and bar on the left side. The carbine is equipped with a pinched blade front sight and a three folding leaf rear sight. It has the correct hooded firing pin that distinguishes the Model 1864 carbine from the brass mounted Model 1862 carbine. The lock plate is marked "JOSLYN FIRE ARMS Co./STONINGTON CONN" ahead of the hammer, a marking more commonly found on the Model 1862. The rear of the breechblock is marked "B.F. JOSLYN PATENT/OCTOBER 8TH 1861/JUNE 24TH 1862". The left side of the barrel has "G.W.S" inspector initials. The matching serial number is located on the top of the breechblock and upper tang. The stock has two boxed script "FDL" cartouches on the left flat. Inspector initials "FDL" are repeated ahead of the buttplate tang. Manufacturer: Joslyn Firearms Company Model: 1864-Carbine BBL: 22 inch round Stock: walnut Gauge: 52 RF Finish: blue/casehardened Serial Number11083 Class: Antique

Lot: 147 - Civil War Era U.S. Sharps New Model 1859 Saddle Ring Carbine

Civil War Era U.S. Sharps New Model 1859 Breech Loading Percussion Saddle Ring Carbine Approximately 30,000 of these New Model 1859 carbines were manufactured c. 1859-1863 per page 199 of "Flayderman's Guide, 9th Edition". Many of these were widely used during the Civil War, and a large number later converted for use with centerfire cartridges, not including this example which still remains in its percussion configuration. The barrel has a blade front sight, the three-line Sharps Hartford address ahead of the Lawrence patent rear sight, and "NEW MODEL 1859" on top at the breech. The lock and receiver have the standard Lawrence and Sharps patent markings. Small inspection initials "S.L." are marked on the left side of the breech and "C.W.H." is on the base of the sling bar. A bordered inspection cartouche is stamped on the left stock wrist. The matching serial number "48449" is marked on the upper receiver and bottom of the barrel. Manufacturer: Sharps Rifle Manufacturing Company Model: New Model 1859 BBL: 22 inch round Stock: walnut Gauge: .52 Finish: blue/casehardened Serial Number48449 Class: Antique

Lot: 148 - Civil War U.S. Spencer Model 1860 Repeating Saddle Ring Carbine

Civil War U.S. Spencer Model 1860 Repeating Saddle Ring Carbine Approximately 50,000 of these carbines were manufactured c. 1863-1865 for the Union Army during the Civil War, per page 633 of "Flayderman's Guide, 9th Edition". The Spencer was one of the most widely used and popular Civil War firearms. Spencer carbines are easily one of the most advanced and well received weapons of the Civil War, and remained important in the Indian Wars into the latter half of the 19th century. This example is a scarce exception that escaped the updates of the Indian Wars era such as a Stabler cutoff. Matching serial number "52559" is marked on the top of the receiver and bottom of the barrel. A small "S" inspection initial is marked on the left breech of the barrel, and two bordered inspection cartouches are stamped on the left stock wrist. Manufacturer: Spencer Repeating Rifle Co Model: 1860 BBL: 22 inch round Stock: walnut Gauge: 52 Spencer Rimfire Finish: blue/casehardened Serial Number52559 Class: Antique

Lot: 149 - Fine Civil War American Machine Works Smith Carbine

Fine Civil War U.S. American Machine Works Smith Breech Loading Percussion Saddle Ring Carbine Over 30,000 Smith carbines were manufactured by American Machine Works and Massachusetts Arms Co. during the Civil War between 1861-1865 with nearly all of them purchased by the U.S. Government per page 632 of "Flayderman's Guide, 9th Edition". Some of these carbines were issued to the 3rd West Virginia Cavalry, who served as part of George Armstrong Custer's 3rd Division and played a pivotal role in the Battle of Moorefield in 1864. It has blade front and ladder rear sights, a sling bar and ring mounted on the left of the receiver, small "L.F.R" inspection initials on the left breech of the barrel, and an oval bordered "JH" inspection cartouche stamped on the left stock wrist. Manufacturer: American Machine Works Model: Smith Carbine BBL: 21 5/8 inch part octagon Stock: walnut Gauge: .50 Finish: blue/casehardened Serial Number9445 Class: Antique

Lot: 150 - Civil War 10-Tube Blakeslee Cartridge Box for Spencer Carbine

Scarce U.S. Civil War E. Gaylord 10-Tube Blakeslee "Quickloader" Cartridge Box for a Spencer Carbine Manufactured c. 1864-1865 by E. Gaylord of Chicopee, Massachusetts. Reportedly, the Ordnance Department purchased approximately 32,000 of these ten tube "Cavalry Style" Blakeslee "Quickloader" cartridge boxes from W.H. Wilkinson and Emerson, Gaylord and Co., between 1864 and 1866. These saw limited use towards the end of the Civil War and after into the Indian Wars era. The Blakeslee cartridge box was designed to hold ten metal tubes, each of which contained seven Spencer cartridges. The tubes could be used to rapidly reload the seven-round Spencer carbine magazine. The Blakeslee cartridge box consists of a leather covered wooden block drilled with ten holes for the cartridge tubes and ten tinned metal tubes. The box has a hinged lid with closure strap, a brass closure finial near the top of the box, two brass swivels on the sides of the box for the shoulder strap, and a belt loop with brass finial on the back of the box. The face of the cartridge box is stamped "BLAKESLEE'S CARTRIDGE BOX" in an arch around the five-line markings "U.S./PAT'D DEC.20.1864/E. GAYLORD/CHICOPEE/MASS." All ten of the correct metal tubes are included. Manufacturer: None Model: None Class: Other

Lot: 151 - Civil War Confederate Morse Third Type Centerfire Carbine

Rare and Desirable Civil War Confederate Morse Third Type Breech Loading Centerfire Carbine The State Military Works in Greenville, South Carolina, manufactured approximately 1,000 total of these brass frame centerfire Morse carbines in three different types during the Civil War per page 653 of "Flayderman's Guide, 9th Edition". There are far less surviving today. This example is a third type, with the action locked by a latch which engages the rounded iron top section of the breech block. George W. Morse invented and patented this advanced breech loading system as well as the cased centerfire cartridge it uses which is considered to be one of the earliest of its kind and a precursor to modern day centerfire cartridges. Of interesting note, Morse had started work on overseeing the alteration of muskets to his breech loading system at the government owned Harpers Ferry Armory just prior to the outbreak of the Civil War and continued his work during the war in support of the Confederacy using some of the same captured machinery. The majority of the Morse carbines were issued to the South Carolina Militia with limited numbers issued to other Confederate forces. It is chambered in .50 caliber centerfire and is loaded by raising the breech block upward. It correctly lacks maker markings. The serial number "985" is marked on both the bottom of the frame and interior of the breech cover. The barrel has a fixed blade front sight and notch rear sight. Mounted in a smooth butternut forearm and straight grip stock. Relevant information on these Morse carbines and other examples pictured can be found on pages 176-198 of the book "Confederate Carbines & Musketoons" by John M. Murphy and Howard Michael Madaus. Manufacturer: Morse Model: Carbine BBL: 20 inch round Stock: butternut Gauge: 50 Centerfire Finish: brass/bright Serial Number985 Class: Antique

Lot: 152 - Civil War Era Confederate Alabama Militia Socket Sword Bayonet

Rare Civil War Era Confederate Alabama Militia Socket Sword Bayonet with Scabbard for a U.S. Model 1841 "Mississippi Rifle" This is a rarely encountered Confederate sword bayonet as used by the Alabama militia during the Civil War, with a socket for mounting on the U.S. Model 1841 "Mississippi rifle." The ricasso of this example has a half viewable king’s head, the maker's mark of Gebruder Weyersberg in Solingen. Some of these are also known to have been marked with the name of Horstmann & Sons of Philadelphia who sold them to military organizations prior to the Civil War. Some Confederate Alabama soldiers were known to have been photographed early in the war with these socket sword bayonets attached to their "Mississippi rifles." It has a 20 3/4 inch long blade with full length stopped fullers, an original felt washer and brass washer are at the base where the blade meets the cross guard, with a cast brass handle/socket assembly and cross guard with bulbous ends. The number "31" is deeply stamped on the handle below the cross guard. Includes a leather scabbard with brass ends. Manufacturer: None Model: None Class: Other

Lot: 153 - Early Flintlock American Long Rifle Inscribed Silas Taylor

Very Scarce Virginia Attributed Early Flintlock American Long Rifle Inscribed Silas Taylor This rifle has been attributed to the "Huffman School" located in Shenandoah Co., Virginia, c. 1760s. Only a very few examples have been associated with this school. These rifles show clear German influence, including in the cheek rests. The Christian Huffman signed and attributed rifles are discussed in the American Society of Arms Collectors article "Early Rifles of the Shenandoah Valley" by Wallace B. Gusler. This rifle is inscribed "Silas Taylor" on the side plate and previously had an old tag reading "your Great Grandfather Taylor's musket." It is very Germanic in style and has simple blade and notch sights, no visible identifying markings on the barrel or lock, brass furniture, raised carving around the barrel tang, and a wooden patchbox lid. Silas Taylor's identity is not documented, but there were multiple men by that name in the colonies at the time, including a captain in the American Revolutionary War in the 3rd Company of the 4th Middlesex County Regiment of Massachusetts Militia. All early American long rifles are rare and desirable, and rifles from the 1760s are particularly desirable as they are early enough to have been used in both the French & Indian War and American Revolution by the militia and riflemen. Many were also carried west deep into the frontier by men like Daniel Boone who pushed American settlement over the mountains and into Indian territory where rifles were prized for defense and for use by the legendary longhunters. In the 18th century, American riflemen became particularly famous thanks to the exploits of frontiersmen like Boone along with Daniel Morgan's famous riflemen and the "Over the Mountain Men" who fought in the Revolutionary War. Many British officers and soldiers were afraid of the accurate and "savage" American marksmen from the backcountry. In fact, General Washington wanted to take advantage of this fear by having his men dress in the fringed hunting shirts of the riflemen even if they were armed with muskets. Given this rifle was once converted for use with percussion caps, it clearly remained in use for more than 60 years and could have also been used during the War of 1812 as well as various conflicts with Native Americans during the early national period and even into the age of Jackson by which time the frontier was far from Virginia beyond the Mississippi. Manufacturer: American Model: Flintlock BBL: 42 1/8 inch octagon Stock: maple Gauge: .62 Finish: brown/brass Serial NumberNSN Class: Antique

Lot: 154 - British Ordnance Marked Barnett Flintlock Swivel Gun

Massive and Highly Desirable British Ordnance Marked Barnett Flintlock Swivel Gun Manufactured c. the 1790s to 1820s, this is a large and desirable example of a flintlock swivel gun produced by Thomas Barnett. Barnett is noted as an ordnance contractor for the British government from 1794 and for the famed East India Company from 1797. These swivel guns were most commonly fitted on the upper deck rails of ships at the time, but also saw use on the parapets of fortifications, increasing the localized firepower over that of a simple musket, while not needing a multi-man crew like larger cannons. There are London commercial proofs marked on the upper left of the barrel at the breech, while the lockplate is marked "BARNETT" at the center. There are faint British ordnance markings on the right of the stock including a broad arrow. There is a pintle attached to the forestock for mounting the gun on a ship or fortification. Includes a hardwood base for display. Manufacturer: British Model: Flintlock BBL: 24 inch round Stock: walnut Gauge: 3 Finish: bright Serial NumberNSN Class: Antique

Lot: 155 - Dorset Marked British Brown Bess Flintlock Musket with Bayonet

Dorset Marked British Brown Bess Flintlock Musket with Bayonet This musket is very similar to the "39 DORSET" marked musket in the Road to American Liberty display at the NRA Museums which is noted as: "Fabricated at Dublin Castle in 1775, this Short Land Service 'Brown Bess' musket was issued to the 54th Dorset Regiment, which arrived at Cape Fear, North Carolina, on May 3, 1776. Under command of British general Lord Cornwallis, the musket saw service at Sullivan's Island, South Carolina. The 54th was dispatched to New York, where it served under General William Howe in the New York and New Jersey campaigns against colonial troops under the command of General George Washington. Later, the Regiment fought in defense of Newport, Rhode Island, in August, 1778. Its last wartime commander was the American traitor Benedict Arnold, who led its troops in an attack on Connecticut in 1781. The 54th returned to Dorset, England in 1783, after the war had ended." Both muskets are not regulation Short Land Pattern muskets as they lack forend cap, wrist escutcheons, Ordnance markings, and the "crown/GR" cipher. Instead they are built more like the "Militia & Marine" muskets and have commercial style proofs and markings and simpler ramrod ferrules. Both appear to have been shortened while in service, likely for use by the Dorset Militia during the American Revolution, French Revolution, Irish Rebellion of 1798, and/or Napoleonic Wars. The Dorset Militia provided homeland defense while much of the Regular Army was off fighting the Americans and French. The musket features a block front sight/bayonet lug on top of the barrel, a crown over a sideways "S" above the vent, "43" and "DORSET" marked on top at the breech, what appear to be London commercial proof marks flaking a "crown/IH" maker's mark on the left at the breech, "W/BRANDER" marked bridle-less lock with double line borders, brass mounts, sling swivels on the forend and trigger guard, "43" branded on the wrist, and "43" and "I" marked socket bayonet. Manufacturer: British Model: Flintlock Musket BBL: 39 inch round Stock: walnut Gauge: .76 Finish: bright/brass Serial Number43 Class: Antique

Lot: 156 - Smoothbore Flintlock Kentucky Rifle Attributed to John Bonewitz

Desirable Well-Documented Revolutionary War Era Relief Carved Smoothbore Flintlock American Long Rifle Attributed to John Bonewitz This smoothbore rifle was attributed by Henry Bishop as by John Bonewitz. It is pictured and described on pages 140-141 of "The History of Weapons of the American Revolution" by Neumann and is listed as an "American Rifle Circa 1770-1780" from the Howard B. Greene Collection. Bishop had first seen the gun in the late 1960s at a Brigade of the American Revolution event. Steve Hench who later purchased it at auction in 2000, fixed the loose forend cap, and then sold the gun to Bishop who noted: I was excited to have it as it provided one of the four styles Bonewitz made: Early rifles with 'Mad Rooster' patch box; Smooth Rifles carved, but without patch box; Typical Bonewitz 'Snowman' designed patch box rifles; and Bonewitz rifles with Reedy style 'Emerging Flower' patch box." The smoothbore, octagon to round barrel has a blade front sight and a dovetailed notch rear sight. The mounts are brass. The stock has very attractive flame figure and features detailed raised relief and incised carving and molding. The carving on the left side behind the cheekpiece is particularly attractive and is the classic John Bonewitz style we have seen on several of his rifles, including the c. 1780 smooth rifle in our May 2026 sale. Manufacturer: American Model: Flintlock BBL: 47 3/8 inch part octagon Stock: curly maple Gauge: .56 Finish: brown Serial NumberNSN Class: Antique

Lot: 157 - Engraved and Relief Carved British Flintlock Blunderbuss

Engraved and Relief Carved British Brass Barrel Flintlock Blunderbuss by Fisher This blunderbuss from c. 1770 has a brass barrel is marked with early Birmingham private proofs and a "crown/FG" maker's mark at the breech. The bore is estimated and flares out to around 1 5/8 inches at the muzzle. The flat lock is signed "Fisher" and has a non-bridled pan. The brass furniture is lightly engraved, including a shell trigger plate finial, and the side plate is a nice pierced design. The stock has raised shell carving around the barrel tang and broad diamond checkering with dot accents on the wrist. Manufacturer: Fisher Model: Blunderbuss BBL: 18 inch round Stock: walnut Gauge: 10 Finish: bright Serial NumberNSN Class: Antique

Lot: 158 - Brass Barrel Flintlock Blunderbuss by R. Daykin with Bayonet

Engraved British Brass Barrel Flintlock Blunderbuss by R. Daykin with Snap Bayonet This c. 1800 blunderbuss has "crown/V" and "crown/P" "private proofs" on the left and "NOTTINGHAM" on top of the barrel which has a folding sprung "snap bayonet", and an approximately "carbine bore" main bore diameter that flares to around 1 1/4 inches at the muzzle. The flat lock is signed "R/DAYKIN" and has a roller on the frizzen spring. The brass mounts feature light foliate engraving, and the trigger guard finial is an acorn. The stock has a checkered wrist. Manufacturer: British Model: Blunderbuss BBL: 14 1/4 inch round Stock: walnut Gauge: 18 Finish: brass/bright Serial NumberNSN Class: Antique

Lot: 159 - Fine British Brass Barrel Flintlock Blunderbuss by Hadley

Fine British Brass Barrel Flintlock Blunderbuss by Hadley This late 18th century blunderbuss is approximately "carbine bore", and the bore flares to 1 1/4 inches at the muzzle. The multi-stage barrel is marked "LONDON" on top at the breech and has London proof marks on the left. The flat beveled lock is signed "HADLEY" and has a stepped tail and sliding half-cock safety. The mounts are brass. Manufacturer: British Model: Blunderbuss BBL: 14 1/8 inch round Stock: walnut Gauge: 18 Finish: brass/bright Serial NumberNSN Class: Antique

Lot: 160 - Red Bonewitz Smoothbore Flintlock American Long Rifle

Relief Carved "Red Bonewitz" Golden Age Smoothbore Flintlock American Long Rifle This c. 1790 "smooth rifle" by John Bonewitz (1758-1828) of Womelsdorf, York, and Pine Grove, Pennsylvania, features a distinctive red varnish finish with some black stippled varnish accenting on the maple stock. The stock also features classic Bonewitz raised relief carving and molding, including particularly attractive carving from the front of the cheekpiece, along its underside, and onto the butt. The barrel is smoothbore and has dovetailed blade and notch sights, and John Bonewitz's rampant lion and "IB" maker marks on the upper left at the breech. The inside of the lock has a faint maker's mark that appears to be "WAR". The gun was purchased in 1995 by Henry Bishop from Harm Leonard, past president of the American Society of Arms Collectors. Much of Leonard's collection is now displayed at the NRA National Firearms Museum. A copy of Henry Bishop's Winter 2002 Kentucky Rifle Association Bulletin article on Bonewitz featuring similarly marked and carved examples is included. Bishop noted that when this gun was first found it had a "large ugly lock and a original brass counter bold plate with an extension soldered to the top." The gun was restored by Warren Selke with a handmade replacement lock, repaired original counter plate, and small areas of wood repaired at the rear lock bolt on the left and right side at the breech. Manufacturer: American Model: Flintlock BBL: 43 1/4 inch octagon Stock: maple Gauge: .50 Finish: brown/brass Serial NumberNSN Class: Antique

Lot: 161 - 1799 Dated U.S. Springfield Model 1795 Type I Flintlock Musket

Rare and Desirable 1799 Dated U.S. Springfield Model 1795 Type I Flintlock Musket with Bayonet The Model 1795 is historically significant as the first official standardized U.S. martial arm and the first firearm manufactured at the U.S. armories. The Model 1795 was based on the French Model 1766 widely used during the Revolution, and was the main infantry arm of the War of 1812. This musket has the correct Type I markings of the 1799-1802 period, and the buttplate has the rare and desirable "1799" date. The Model 1795 Type I musket was manufactured by Springfield from 1795 and 1806 with those produced in 1799 being the first units to receive a manufacture date stamped on the buttplate. The lock is marked with the eagle and shield emblem (traces) over a script "US" at the center and "SPRINGFIELD" in a vertical arch at the rear. The left side of the barrel only has a "V" proof. The sling swivels hold a leather sling. "GDM" George D. Moller collection mark in the toe of the stock. The socket bayonet is marked "ROSE" and "US." Manufacturer: Springfield Armory U.S. Model: 1795 BBL: 43 1/4 inch round Stock: walnut Gauge: 69 Finish: bright Serial NumberNSN Class: Antique

Lot: 162 - Nathan Starr U.S. Contract 1816 Flintlock Musket Dated 1832

Exceptional Nathan Starr U.S. Contract Model 1816 Flintlock Musket with Brown Lacquer Finish Dated 1832 The Model 1816 musket was one of the most prolific firearms in the pre-Civil War United States. Over 675,000 were manufactured at the national armories, and thousands more were manufactured by private contractors. Many of these muskets were converted to percussion, and they saw use into the Civil War era. Reportedly, Nathan Starr Jr. manufactured 15,530 Model 1816s between 1829-1840 in Middletown, Connecticut. This earlier example has the correct floral motif below the date on the lock and has mostly standard markings and features. However, while nearly all Starr muskets are reported to have had the armory bright finish, this example is one of a smaller amount made with the brown lacquer type finish typically associated with the Hall rifles of the period. "US" above a sunburst and "N. STARR" in an arch at the center of the lock, and "MIDDtn/CONN/1832" followed by a floral motif/star at the tail of the lock. "US" above "JM" (Justin Murphy) and a shielded "P" proof marked on top of the barrel at the breech ahead of the date "1832" on the barrel tang. Oval script "LS" (Luther Sage) inspection cartouche stamped on the left flat and an oval script "DT" (Daniel Tyler) inspection cartouche on the comb just ahead of the buttplate tang. Manufacturer: N. Starr Model: 1816 BBL: 42 inch round Stock: walnut Gauge: 69 Finish: brown/casehardened Serial NumberNSN Class: Antique

Lot: 163 - U.S. Springfield Model 1795 Type III Flintlock Musket Dated 1812

War of 1812 State of New York Marked U.S. Springfield Model 1795 Type III Flintlock Musket Dated 1812 This U.S. Springfield Model 1795 musket from 1812 is a Type III variation with integral round iron priming pan and trigger guard with rounded end finials. Many of these muskets were rushed into service during the War of 1812 as the U.S. attempted to capture Canada and then shifted to fighting off the British invasion. This musket was supplied to the State of New York as signified by the "S.N.Y." stamped perpendicular to the bore on top of the barrel followed by "US" double stamped. The "P", eagle head, and "V" proof marks are on the let at the breech. The lock plate is dated "1812" behind the cock and is marked with the script "US" over the federal eagle and shield emblem above a curved "SPRINGFIELD" at the center. The buttplate heel extension is dated "1813". The barrel has a bayonet stud on top near the muzzle, and a brass blade front sight is on the rear strap of the front barrel band. Sling swivel studs are on the middle band and trigger guard finial. "US" is marked in script on the left stock flat. Manufacturer: Springfield Armory U.S. Model: 1795 BBL: 44 5/8 inch round Stock: walnut Gauge: .69 Finish: bright Serial NumberNSN Class: Antique

Lot: 164 - Engraved, Gilt & Ebony Stocked Wheellock Pistol by Caspar Spat

Documented Incredible Relief Chiseled and Engraved, Gilt, and Ebony Stocked 17th Century German Wheellock Holster Pistol by Caspar Spat The incredible artistry on display on this pistol reflects the superior quality of the Munich Court Workshop in the 17th century, particularly the work of Caspar Spat who is noted as appointed as ironworker to the Duke of Bavaria in 1632. In this period,

Lot: 165 - Attractive German Jaeger Rifle with 1710 Dated Barrel

Attractive German Jaeger Rifle with 1710 Dated and Johann Martin Stein Signed Barrel and Christian Haman Signed Lock The swamped octagon barrel has round bottom, seven-groove rifling, a dovetailed brass blade front sight, wide dovetailed notch rear sight with decorative finial, wavy line engraving by the breech end, and "IOHANN MARTIN STEIN 1710" marked on top. Other jaeger rifles with Johann Martin Stein barrels dated earlier, including to 1699, are known. The lock has "Christian Haman" signed under the pan, "Onoltbach" (Ansbach) behind the cock, Diana and a hound engraved at the center, mask design on the frizzen, and some floral and border engraving. Christian Haman of Ansbach is also recorded in the early 18th century. The rifle has adjustable double set triggers, iron trigger guard with floral finials and grip extension, "HL/47" inventory tag by the rear trigger guard finial, iron ramrod pipes, a floral finial and raised carving at the entry pipe, pierced iron side plate with floral scroll patterns and mythical figures, pieced iron wrist escutcheon with harpy style figures, a broad iron buttplate with knob on the heel and ornate finial, cheekpiece with scroll accent, horn forend and ramrod caps, and wood patchbox lid. Manufacturer: German Model: Flintlock BBL: 32 inch octagon Stock: walnut Gauge: 58 Finish: bright Serial NumberNSN Class: Antique

Lot: 166 - Engraved Germanic Flintlock Jaeger Rifle

Engraved Germanic Flintlock Jaeger Rifle This early 18th century jaeger rifle has no visible markings aside from what appears to be "CK" on the lock partially covered by the frizzen spring (attributed by the consignor to the Kuchenreuter family) and "N 56" on the buttplate and features a swamped octagon barrel with a dovetailed brass blade front sight and dovetailed notch rear sight, flat lock with scroll, border, and mask engraving; adjustable double set triggers, iron mounts including an extended trigger guard, and a heavy walnut stock with some raised relief foliate carving, a wood patchbox lid, and sculpted cheekpiece. Manufacturer: German Model: Flintlock BBL: 29 5/8 inch octagon Stock: walnut Gauge: 65 Finish: bright Serial NumberNSN Class: Antique

Lot: 167 - Engraved and Gold and Silver Decorate Caucasian Miquelet Rifle

Attractive Engraved and Gold Damascene and Silver Overlay Decorated Caucasian Miquelet Rifle with Extensive Multi-Color Stock Inlays Rifles like this were popular within the mountainous Caucasus region at the border of the Russia Empire and the Ottoman Empire where Europe and Asia meet throughout the 19th century. They range from basic utilitarian rifles to extremely ornate rifles that reflect the status of their owners. This is a very attractive example of the latter with Damascene style gold inlays and foliate scroll engraving on the muzzle, breech, and lock, silver barrel bands and stock overlays, and extensive multi-colored inlays in the highly figured stock. The rifled barrel has a low blade front sight, an unknown maker's mark on top towards the breech amongst the designs, and a shield shaped rear sight with three peeps. The rifle has a small "onion" shaped trigger. Manufacturer: Unknown Model: Miquelet BBL: 36 inch octagon Stock: hardwood Gauge: .55 Finish: brown/gold/silver Serial NumberNSN Class: Antique

Lot: 168 - Engraved Caucasian Miquelet Rifle with Elaborate Silver Inlays

Engraved Caucasian Miquelet Rifle with Elaborate Silver Inlays Long guns like this were popular within the mountainous Caucasus region at the border of the Russia Empire and the Ottoman Empire where Europe and Asia meet in throughout the 19th century. The rifled barrel has low blade and notch sights, an unknown maker's mark on top towards the breech, and is secured by five engraved nickel-silver barrel bands. The stock also features extensive engraved nickel-silver inlays in various foliate motifs as well as an eagle on the underside of the forend. The rifle has a small "onion" shaped trigger. The lock has silver inlays and panels, an unknown marking, and a "40" marked inventory tag. Includes an iron ramrod. Manufacturer: Unknown Model: Miquelet BBL: 30 1/4 inch octagon Stock: maple Gauge: .54 Finish: blue/silver/nickel-silver Serial NumberNSN Class: Antique

Lot: 169 - Caucasian Ball Pommel Type Miquelet Pistol

Ornate Silver, Niello, Gold, and Shagreen Ornamented Caucasian Ball Pommel Type Miquelet Pistol This highly ornate 19th century pistol is of the style popular in the Caucasus region at the border of Eastern Europe and Western Asia. It may originate from Tbilisi. The lock has an untranslated golden maker's mark and a "101" style marking in gold on the plate. The barrel also features gold inlaid designs, and the other metal is niello decorated silver with beautiful designs. A lanyard loop is fitted on the cap on the antique ivory ball pommel. The stock is black shagreen bound hardwood. The ramrod is absent. Manufacturer: Unknown Model: Miquelet Pistol BBL: 14 1/8 inch round Stock: hardwood Gauge: 62 Finish: gold/silver/niello/bright Serial NumberNSN Class: Antique

Lot: 170 - Damascene, Niello, and Silver Mounted Caucasian Miquelet Pistol

Highly Ornate Damascene and Niello Decorated Silver Mounted Caucasian Miquelet Pistol This highly ornate pistol was likely manufactured in the 19th century in the Caucasus region. That region was the frontier between the Russian and Ottoman empires at the time. The decoration on this pistol, particularly the niello decorated silver mounts, is similar to examples believed to originate from Tbilisi, Georgia, or Dagestan c. 1830-1850. The smoothbore barrel is decorated with chiseled foliate and scroll designs with gilding and a gold lined marking at the breech that appears to include "1781". The lock has gold damascene scroll patterns as does the ball shaped trigger. The pommel stud and some of the screws are also accented with gold. The silver mounted stock has a variety of floral patterns with extensive contrasting niello accents. Muzzleloaders remained in general use in the Caucasus and surrounding areas through the end of the 19th century and were part of a the region's traditional dress much longer and are often associated with the famous Cossacks. Manufacturer: Unknown Model: Miquelet BBL: 12 1/8 inch round Stock: metal Gauge: .62 Finish: gold/niello/silver/brown Serial NumberNSN Class: Antique

Lot: 171 - Pair of Ornate Balkan "Rat Tail" Miquelet Pistols

Pair of Ornate Balkan "Rat Tail" Miquelet Pistols -A) Miquelet Pistol Pair of Ornate Balkan "Rat Tail" Miquelet Pistols -A) Miquelet Pistol Pistols of this design were in use in the Balkans from the mid-18th century through the end of the 19th century. The smoothbore barrels are marked with a "42" inventory number in white on the left at the breech. The locks have scroll engraving. The elaborate white metal stocks have raised relief scroll designs. Manufacturer: Unknown Model: Miquelet BBL: 13 1/4 inch round Stock: metal Gauge: .65 Finish: bright Serial NumberNSN Class: Antique B) Miquelet Pistol As described in "A". Manufacturer: Unknown Model: Miquelet BBL: 13 1/4 inch round Stock: metal Gauge: .65 Finish: bright Serial NumberNSN Class: Antique

Lot: 172 - Pair of Silver Mounted and Engraved Flintlock Pistols

Pair of Silver Mounted and Engraved Flintlock Pistols -A) Flintlock Pistol Pair of Silver Mounted and Engraved Flintlock Pistols -A) Flintlock Pistol These pistols were likely produced in the Ottoman Empire in the early 19th century. They have unidentified maker's marks on top and on the left at the breech ends of the cannon style barrels and extensive foliate, scroll, and martial themed motifs throughout, including on the silver mounts, and the stocks also feature extensive silver wire inlays. Manufacturer: Unknown Model: Flintlock Pistol BBL: 9 3/4 inch part octagon Stock: walnut Gauge: .60 Finish: brown/silver/bright Serial NumberNSN Class: Antique B) Flintlock Pistol As described in "A". Manufacturer: Unknown Model: Flintlock Pistol BBL: 9 3/4 inch part octagon Stock: walnut Gauge: .60 Finish: brown/silver/bright Serial NumberNSN Class: Antique

Lot: 173 - Pair of Leather Pommel Holsters for a Pair of Wheelock Pistols

Very Scarce Pair of Leather Pommel Holsters for a Pair of Wheelock Pistols Pommel holsters for early firearms are rarely available, especially those for wheellock pistols, and exist within few advanced collections. These holsters measure 18 1/2 and 19 inches and have barrel sections that appear to accommodate pistols with roughly 12 inch barrels. There are no identifying markings, but the exterior has a light checkered pattern. Each holster has one loop on one side and two loops on the opposite side. These holsters would have been mounted to a saddle on either side of the pommel where the pistols could easily be drawn by the rider. Wheellock pistols were the first firearms practical for cavalry as they could be kept loaded and ready and did not require a burning slow-match like the matchlocks of the 16th century. As loading while on horseback was difficult, especially in combat, a cavalryman would typically carry two pistols in his pommel holsters to allow for multiple shots before reloading and also edged weapons like a lance and/or sword. Using the "caracole" maneuver, cavalrymen would execute a turning attack and fire their pistols to inflict casualties upon the enemy, and then ride back to safety to reload and execute another attack. If the enemy faltered, they could then follow up with a cavalry charge. Other techniques included discharging their pistols into the enemy during a charge and then switching to their swords and/or lances. Once reliable flintlock pistols became available, wheellock pistols were largely replaced, but flintlock pistols were also commonly kept in holsters like these. In fact, pommel holsters remained in use through the American Civil War. Manufacturer: None Model: None Class: Other

Lot: 174 - Framed Oil Painting of a Port Scene with the Villa Medici

Framed Oil Painting of a Port Scene with the Villa Medici After Claude Lorrain Artist: Unknown artist after Claude Lorrain Title: Port Scene with the Villa Medici Year Created: 19th century Medium: Oil on board Canvas Size: 38 x 28 1/4 inches Frame Size: 42 by 32 1/4 inches This remarkable painting is based on the work of Baroque artist Claude Lorrain (aka Le Lorrain, c. 1604-1682), specifically "Port Scene with the Villa Medici" from 1647 from the Palazzo Pitti that has been at the Uffizi in Florence, Italy, since 1773. It also shares similarities in structure and details with Lorrain's other famous seaport paintings such as "Port de Mer au Soleil Couchant" (Seaport at Sunset) from 1639 in the collection at the Louvre and "A Seaport" from 1644 in the National Gallery in the UK. The ships, structures, and lightly clouded sky frame the soft glowing sun on the horizon. The dynamic but tranquil scene is inhabited by numerous figures in a wide variety of attire giving life to the bustling seaport, including merchants trading at the shoreline, fishermen, sailors tending to the rigging of the large vessel on the left, a child with a dog on the right, and onlookers on the balcony to the right. Lorrain (c. 1604-1682) was born as Claude Gellee in the Duchy of Lorraine but moved to Germany and later to Rome where he rose from obscurity to a sought after artist, including the patronage of Pope Urban VIII, various influential cardinals, and King Philip IV of Spain. His clients also included Europeans embarking on the Grand Tour and wealthy patrons from as far as England. His detailed sketches of landscapes and architecture in and around Rome formed the basis of his paintings. He is noted for his deep study of the landscapes and natural lighting, including having “tried by every means to penetrate nature, lying in the fields before the break of day and until night in order to learn to represent very exactly the red morning sky, sunrise and sunset and the evening hours.” In addition to his paintings, he was also a talented draftsman and printmaker. In response to spurious copies of his works being sold by other artists, he assembled his famous "Liber Veritatis" (Book of Truth) featuring drawings of his paintings, including the original this is based on as painting 28. They were later republished in the 18th century and 19th century, and the National Gallery in the UK notes: "Claude exerted considerable influence on landscape artists of the 18th and 19th centuries," including the beloved English Romantic artist Joseph Mallor William Turner (1775-1851) who attempted to outdo Lorrain and directed that two of his paintings be hung beside his as part of his bequest, the largest donation of works of art to the National Gallery. Manufacturer: None Model: None Class: Other

Lot: 175 - Engraved L. Van Solingen Small Bore Dutch Flintlock Rifle

Engraved L. Van Solingen Small Bore Dutch Flintlock Rifle There were two Jan van Solingen active as gunmakers in Amsterdam, the first in the late 17th century to early 18th century and the second in the first half of the 18th century per the Riijks Museum in Amsterdam. This small bore rifle has a swamped barrel with eight-groove rifling, a dovetailed brass blade front sight, dovetailed iron notch rear sight, and dot and scroll engraving ahead of the rear sight and on the breech section. The brass lockplate is signed "I:VAN SOLINGEN/AMSTERDAM" and has scroll, floral, and border engraving. "IP" is marked on the inside of the lock. The frizzen design is very interesting; it has a rotating steel and separate pan cover. This would make the gun easier to carry safely while loaded as the battery face could be turned away while the powder remains covered. The furniture is brass with nice cast and engraved designs, particularly the sideplate which has pierced scrollwork man in a chariot, and the finely figured root-wood stock has a horn forend cap, fine molding, raised relief floral carving, an oval cheekpiece, wood patchbox lid, and "HL/50" brass inventory tag on the bottom. Manufacturer: Dutch Model: Flintlock BBL: 33 3/4 inch octagon Stock: hardwood Gauge: 38 Finish: bright Serial NumberNSN Class: Antique

Lot: 176 - Flintlock Fowling Piece by Froment of Erlangen

Ornate Flintlock Fowling Piece by Froment of Erlangen Inscribed with the Coat of Arms of a German Prince This rifle by Pierre Froment of Erlang in Bavaria north of Nuremberg in the first half of the 18th century has a silver wrist escutcheon engraved with the coat of arms of the House of Oettingen or one of its branches based from Schloss Oettingen in Oettingen in Bayern in Bavaria south of Erlang. In addition to the normal aspects of the coat of arms, there are books by the dog supporters' feet and an elephant at the bottom. The latter may relate to the House of Helfenstein. It may have been made for Prince Franz Albrecht I (1663–1737) or Prince Johann Aloys I (1707–1780) of Oettingen-Spielberg. There is also a brass "HL/81" tag on the bottom of the buttstock. The long smoothbore barrel has a brass blade front sight, long sighting flat with scroll rear finial, raised scroll design ahead of the breech, a rear rib engraved with a musketeer, and dished tang. The "banana" profile lock is signed "Froment A Erlang" along the bottom and has light scroll engraving, a mask cock screw, and filework on the tail. The iron furniture is decorated with scroll patterns, grotesque masks, and mythical beasts and includes attractive piercings. The full-length stock has raised molding and flats, some inlaid wire scroll elements, and a fairly robust butt. Manufacturer: European Model: Flintlock BBL: 46 1/2 inch round Stock: walnut Gauge: 11 Finish: bright Serial NumberNSN Class: Antique

Lot: 177 - Historic Game Scene Engraved Wilkinson & Son Half-Stock Rifle

Historic Game Scene Engraved Wilkinson & Son Half-Stock Percussion Sporting Rifle Documented as Sold to the Duke of Wellington The included copy of the factory ledger lists rifle 5958 as a 32 bore single barrel rifle with 28 inch length as sold to the Duke of Wellington in April of 1853. 5959 was a 38 bore double rifle also sold to him the same month. This would be Arthur Wellesley, 2nd Duke of Wellington (1807-1884), "the son of Waterloo." He became the Duke of Wellington upon the death of his father in 1852. His father was the famed 1st Duke of Wellington, the hero of the Napoleonic Wars who famously shattered Napoleon's army at Waterloo. Like his father, the 2nd Duke of Wellington had a long career in the British military and politics. He rose rapidly in rank from an ensign in 1823 to a major-general in 1854. He was Master of the Horse from 1853 to 1858 and was a Knight of the Garter starting in 1858. He was a member of the Privy Council and later in life was the Lord-Lieutenant of Middlesex among other positions. This classic Victorian deer rifle has a Damascus barrel, bead style blade front sight, four-leaf rear sight with inlaid sight lines, "WILKINSON & SON. GUN MAKERS TO HER MAJESTY. PALL MALL. LONDON." signed on top of the breech section, matching serial number on the barrel and trigger guard tang, London proofs, primarily scroll and floral engraving, "WILKINSON. &. SON." signed on the lock which has a sliding safety ahead of the hammer, pineapple finial on the trigger plate, adjustable double set triggers, square back trigger guard with grip extension and running stag scene, standing stag scene on the round patch box, additional standing stag scene on the buttplate tang, and half-length stock with horn forend tip, silver wedge and wrist escutcheons, checkered wrist, and shotgun butt without cheek rest. Manufacturer: Wilkinson & Son James Model: Percussion BBL: 31 1/2 inch octagon Stock: walnut Gauge: 28 bore Finish: brown/casehardened/blue Serial Number5958 Class: Antique

Lot: 178 - Forsyth & Co. Sliding Lock Percussion Shotgun

Extremely Rare Engraved, Gold Inlaid, and Silver Mounted Forsyth & Co. First Model Sliding Lock Percussion Shotgun with Hallmarks for 1822 Reverend Alexander Forsyth was instrumental in the development of use of fulminate of mercury as a replacement for black powder as an ignition source and is generally considered to be the inventor of the percussion ignition system. This incredible early percussion gun features Forsyth's distinctive first model sliding primer mechanism. The smoothbore Damascus barrel has a gold bead front sight with flush inlaid gold "spider" base, girdled transition, and extensive gold inlaid foliate and martial trophy designs on the breech section, including an escutcheon signed "FORSYTH/& CO" on top. The underside of the barrel is marked with Birmingham proof marks and "Damascus", and "2899" (9s look like upside down 5s) is marked on the breech plug hook. The standing breech has a grooved rear sight with a gold crescent moon and three stars along with additional gilt foliate and star patterns. The lock is decorated en suite and has gold foliate and martial trophy designs and "FORSYTH/& CO" signed on the drum at the center. The mounts are silver with cast foliate and classical martial patterns. "SC & Co" silversmith's marks and Birmingham hallmarks including the date code "y" for 1822 are struck on each of the primary mounts. The figured walnut half-stock has a checkered wrist and a 13 5/8 inch length of pull. Manufacturer: Forsyth Model: Sliding Lock BBL: 38 5/8 inch part octagon Stock: walnut Gauge: 20 Finish: brown/gold/casehardened/silver Serial Number2899 Class: Antique

Lot: 179 - Kings of Hanover C.D. Tanner Percussion Double Barrel Shotgun

Attractive Finely Engraved and Gold Inlaid C.D. Tanner Percussion Double Barrel Shotgun from the Kings of Hanover Gewehrkammer This distinctive shotgun is a product of Carl Daniel Tanner (1791-1858) who served as the Hanoverian hofrustmeister (court armorer) in 1829-1845. This shotgun is identified from the gewehrkammer (gun room) of the Kings of Hanover at Blankenburg before being moved to Schloss Marienburg in 1945. The browned, Damascus barrels are inlaid with two gold bands at the breech end and have a concave rib fitted with a bead front sight. The barrels and are rib signed “C.D. TANNER./KONIGL-HOF-RUSTMEISTER/IN HANNOVER.” The underside of the right barrel has "682" and "39." "39" is also repeated inside the forend, on the back of the locks, and on the buttplate. The locks have sunken "TANNER/HANNOVER" maker's marks, remnants of removed safeties/hammer stalls, bestial designs on the strikers, scroll and floral patterns with animal masks, and game birds. The ramrod entry pipe and trigger plate finials are pineapple designs. The trigger guard bow has a scene with a pair of dogs and birds, and a reposed dog is on the heel. The wrist escutcheon has the crest of a blood royal. Sling swivels are fitted to the middle ramrod pipe and trigger plate. The stock has a checkered wrist, shadowline cheekpiece, and 14 inch length of pull. Manufacturer: German Model: Double Barrel BBL: 30 1/4 inch solid rib Stock: walnut Gauge: 20 Finish: brown/gold/bright Serial Number39 Class: Antique

Lot: 180 - Engraved Lincoln Jeffries .500 Pryse-Type “Stopping” Revolver

Extremely Scarce Finely Engraved Lincoln Jeffries .500 Pryse-Type Double Action “Stopping” Revolver This .500 revolver was manufactured circa 1880 and was designed to fill the same role as a powerful howdah pistol. This large frame revolver has an octagonal barrel with raised narrow sighting rib bearing a crescent blade front sight and signed “LINCOLN JEFFRIES/GOLD PRIZE LONDON. 1870/FIELD PRIZE. LONDON. 1879”. The left upper barrel flat is engraved “C.F. 500 GAUGE”. The rib extends to form the top strap which incorporates a grooved rear sight. The cylinder is marked "STEEL" and "MARENAS/MADRID". The frame has twin release levers and bronze/gold colored screws and cylinder release. Figured walnut grip has a cap with a lanyard ring. The barrel has small Birmingham black powder proof marks on the left upper flat. Manufacturer: Lincoln Jeffries Model: Double Action BBL: 4 inch Gauge: 500 CF Finish: silver/gold Grips: walnut Serial Number2333 Class: Antique

Lot: 181 - Cased Engraved and Gold Inlaid E. & W. Bond Percussion Pepperbox

Elaborate and Attractive Gold Inlaid, Engraved, Chiseled, and Hallmarked Silver E. & W. Bond Percussion Pepperbox This incredible pepperbox features a Birmingham hallmarked frame, grip, and trigger guard with essentially full-coverage foliate scroll chiseling and engraving. The date code appears to be an "X" for 1846, and the hallmarks also include the lion, and anchor as well as "WJ" silversmith marks. The hammer has a gold inlaid star and is also scroll engraved and signed "E & W BOND 45 CORNHILL LONDON". The action has a sliding safety. The six-shot barrel group has gold inlaid stars and an engraved border at the muzzle, gold inlaid wavy double line borders at the breech, and London proofmarks. It comes in an oak case that has been custom fitted to the gun and contains a Fredrick Joyce's "Percussion Gun Powder" tin, small pocket powder flask, "74" marked ball mold with a ramrod on one arm, and a loading and cleaning rod. Manufacturer: British Model: Pepperbox BBL: 4 inch fluted Gauge: .45 Finish: blue/gold/silver Grips: German silver Serial NumberNSN Class: Antique

Lot: 182 - Boss & Co. 12 Bore Best Quality Jones Underlever Double Rifle

Very Fine Factory Engraved Boss & Co. 12 Bore Best Quality Jones Underlever Double Rifle with Case Completed circa 1869 according to page 235 of Donald Dallas' "Boss & Co.: Builders of Best Guns Only". Built with browned Damascus steel barrels with a beaded blade fore sight and four-leaf (one standing, three folding) rear sight with platinum center lines on the matted flat solid rib which is marked "BOSS & Co. 73 St. JAMES'S STREET. LONDON." in a banner, band of engraving at the breech, front sling stud, and period London proof marks. The rifle appears to be chambered for 2 1/2 inch shells. The barrels are fitted to the casehardened Jones underlever back-action which display extensive near full coverage traditional tight English scroll engraving which surrounds "BOSS & Co." signatures on either lockplate and then continues onto the underlever, the semi-bestial hammers, the trigger guard, and both tangs. The rifle features double triggers, non-rebounding hammers, and bar safeties on either lockplate. The rifle is fitted with a nicely figured and multi-point checkered splinter forend with engraved casehardened iron and wedge fastener escutcheon as well as a straight grip stock with distinctive extended grip lower tang found on Boss rifles of the era, blank stock oval, rear sling stud, and a lightly engraved checkered steel buttplate. Includes a brass cornered hardwood takedown case with Boss trade label containing bullet molds, cleaning tools, and loading tools. Length of pull 14 3/8 inches. Weight 10 lbs. 6 oz. Manufacturer: Boss & Co Model: Double Rifle BBL: 28 inch solid rib Stock: walnut Gauge: 12 bore Finish: brown/casehardened Serial Number2730 Class: Antique

Lot: 183 - Highly Desirable Suit of Japanese Armor with Display Stand

Highly Desirable Suit of Japanese Armor with Display Stand Constructed primarily from black lacquered metal plates assembled with blue and white cord, with blue/floral pattern backing material, and areas of "tatami" plate and chain protection at the elbows and upper arms and hexagonal plates around the neck and leg areas. A swiveling bracket for a sashimono banner is present on the back, with traditional hanging guards for the shoulders and thighs. The helmet is constructed from 16 plates in the crown, 4 in the neck guard and a one-plate visor, fitted with an ornament of a horned demon, and paired with a menpo-pattern lower face guard decorated with facial hair and a set of gold lacquered teeth. The set is assembled on a hardwood display stand. The consignor attributes the set to 1850-1875, and the helmet ornament to the 1900s. Manufacturer: None Model: None Class: Other

Lot: 184 - Exceptional Signed Katana Length Japanese Sword

Exceptional Signed Katana Length Japanese Sword Measuring 39 1/2 inches in overall length with a 28 1/4 inch blade showing a gentle notare-pattern hamon set into a striped copper habaki. The tsuba is round iron construction, with 14 scallops around the edge and a pierced-through leaf design in the center. The fuchi and kashira are gold accented brass, with a pair of dog themed menuki under the dark wrap. The saya is wrapped in textured black leather, with fittings decorated to match the hilt. The tang has one mekugi-ana, and a 12-figure carved signature on the left side. Manufacturer: None Model: None Class: Other

Lot: 185 - Signed Japanese Blade in Shirasaya Fittings with NPO Certificate

Signed Japanese Sword Blade in Shirasaya Fittings with NPO Certificate The blade measures 34 inches overall, with a 25 inch long edge, notare-pattern hamon and a nickel plated habaki. The tang shows two mekugi-ana, with an elaborate array of markings on both sides, per a supplied translation, these markings attribute the original smith as Ishiyama Yoshifumi, who was active in the late 1800s up to 1903, and additional markings indicating a professional shortening of the blade in July 1944 by a smith named Hiromitsu, which include an elaborate poem in honor of the Emperor of Japan which dominates the right side. Included with the blade are a set of shirasaya fittings, a purple cloth sword bag, and an NPO origami certificate (envelope and photocopies of Japanese-language worksheet included) giving the blade a score of 73 points. Manufacturer: None Model: None Class: Other

Lot: 186 - Rudolph Kornbrath Engraved Colt Model 1902 Military Pistol

Stunning and Well-Documented "Special Ordered" Rudolph Kornbrath Master Engraved Attributed Colt Model 1902 Military Semi-Automatic Pistol with Ivory Grips, Beaded Blade Front Sight, and Factory Letter Manufactured in 1919, this is an extraordinary example of a special ordered Colt Model 1902 Military pistol that has long been attributed as engraved by the world renowned Master Engraver Rudolph

Lot: 187 - Scarce Factory Engraved Colt Model 1902 Military Pistol

Extremely Scarce Documented Factory Engraved Colt Model 1902 Military Semi-Automatic Pistol with Factory Letter Manufactured in 1912, this is an extremely scarce factory engraved example of the Colt Model 1902 Military pistol. According to "The Book of Colt Firearms" by Wilson, only approximately 20 of these Model 1902 Military pistols were factory engraved. It is noted that Norvell Shapleigh

Lot: 188 - Early Production Pre-WWII Colt Super .38 Semi-Automatic Pistol

Very Early Production Three-Digit Serial Number Pre-World War II Colt Super .38 Semi-Automatic Pistol with Factory Letter Manufactured in 1929, the second year of production, this is a very fine example of Colt's Super .38 pistol. These Super .38 pistols were first shown to the public at the August 1928 Camp Perry National Matches, with very few having been produced that year, and they were available for purchase by the start of 1929. The included factory letter confirms the configuration with the grips not listed, as well as shipment to Union Hardware & Manufacturing Co. in Los Angeles, California, on 23 February 1929 as the only gun of its type in the shipment. The left side of the matching numbered slide is marked with the two-line address and patent dates, while the right side bears the model/caliber marking along with the Rampant Colt. The early production three-digit serial number is on the right of the frame. The left of the trigger guard is marked "1" over "VP", and the right is marked "20". The blued barrel has a polished chamber hood and is unmarked. It is fitted with blade front and notch rear sights, wide checkered hammer, long grip safety, arched checkered mainspring housing, checkered walnut grips, and a two-tone .38 Super Auto magazine. Manufacturer: Colt Model: Super 38 BBL: 5 inch round Gauge: 38 Super Finish: blue Grips: walnut Serial Number180 Class: Curio & Relic Handgun

Lot: 189 - Pre-WWII Colt Government Model NM Pistol with Box and Letter

Excellent Pre-World War II Era Wolf & Klar Forth Worth, Texas, Retailer Shipped Colt Government Model National Match Semi-Automatic Pistol with Box and Factory Letter Manufactured in 1934, the third year of production for Colt's Government Model National Match pistols, with only around 4,813 manufactured between 1932 and 1941, making pre-World War II examples such as this specimen relatively scarce on the collectors market today. The included factory letter confirms the pistol's configuration, listing a 5 inch barrel in .45 caliber, blue finish, and type of grips not listed, when sent in a shipment with one other pistol of the same type to noted retailer Wolf & Klar in Forth Worth, Texas, on April 18, 1934. It features fixed rounded blade front and squared notch rear sights, the Colt address and patent dates in two lines on the left of the slide, the "NATIONAL MATCH" and caliber designations marked on the right of the slide, a matching "175/669" serial number marked behind the firing pin stop, a blued barrel with bright chamber hood and marked with a circled "M.B" on the left of the lug, the model designation and "C" prefix serial number on the right of the frame, "W" over a Colt triangle "VP" factory proof on the left of the trigger guard, and "60" on the right of the trigger guard. Fitted with a short milled and checkered trigger, a checkered slide catch, checkered wide spur hammer, checkered thumb safety, checkered arched mainspring housing, a pair of checkered walnut grips, and a two-tone blued magazine marked "COLT/45 AUTO." on the base. Also includes a Colt maroon box with the number on the bottom removed and appropriate end labels. Manufacturer: Colt Model: Government BBL: 5 inch round Gauge: 45 ACP Finish: blue Grips: walnut Serial NumberC175669 Class: Curio & Relic Handgun

Lot: 190 - Pre-WWII Colt Model 1903 Pocket Hammerless Pistol

Outstanding Pre-World War II Colt Model 1903 Pocket Hammerless Semi-Automatic Pistol with Original Box Manufactured in 1939, this is an outstanding example of Colt's Model 1903 Pocket Hammerless pistol. It is marked with the standard two-line address/patent dates and Rampant Colt on the left of the slide and the caliber markings on the right. Trigger guard marked "W/VP" and "63", the serial number on the left of the frame, and standard features. Includes the original Colt maroon box with the matching serial number hand written in pencil on the bottom. Manufacturer: Colt Model: 1903 Pocket Hammerless BBL: 3 3/4 inch round Gauge: 32 ACP Finish: blue Grips: walnut Serial Number538241 Class: Curio & Relic Handgun

Lot: 191 - Factory Engraved Colt Model 1903 Pocket Hammer Pistol

Highly Attractive Factory Engraved Colt Model 1903 Pocket Hammer Semi-Automatic Pistol with Ivory Grips Manufactured c. 1906, this is a highly attractive example of a factory engraved Colt Model 1903 Pocket Hammer pistol. In "The Book of Colt Firearms" by Wilson, the authors indicate that approximately 15 Model 1903 Pocket Hammer pistols were factory engraved, making this example very scarce. An included copy of a letter from the Colt archives indicates that the records for this pistol were either lost or destroyed, but that it was manufactured c. 1906. Despite the lack of factory records, we feel that the pistol is factory engraved and appears to be the work of the shop of Colt's legendary engraver Cuno Helfricht, having one of his distinct kidney/fan shapes on the front left of the slide and a floral blossom on the bottom of the frame, both indicators of his work. The pistol itself shows masterfully executed scrollwork with beaded backgrounds on more than half of the surfaces, with the scrollwork itself being very typical of Helfricht's work. The left side of the slide has the two-line and two-block patent and address markings, with the Rampant Colt at the rear of the slide. The right side of the slide has the two-line caliber marking. The serial number is on the left of the frame and there is a "5" on the left of the trigger guard. It is fitted with the standard blade and notch sights, a checkered rounded hammer (standard until around serial number 22000), and a pair of very attractive smooth ivory grips. Manufacturer: Colt Model: 1903 Pocket Hammer BBL: 4 1/2 inch round Gauge: 38 Colt Auto Finish: blue Grips: ivory Serial Number18377 Class: Curio & Relic Handgun

Lot: 192 - Early Production Pre-World War II Colt Super .38 Pistol

Very Fine Early Production Pre-World War II Colt Super .38 Semi-Automatic Pistol Manufactured in 1929, the second year of production, this is a very fine example of Colt's Super .38 pistol. These Super .38 pistols were first shown to the public at the August 1928 Camp Perry National Matches and were available for purchase by the start of 1929. The left side of the matching numbered slide is marked with the two-line address and patent dates, while the right side bears the model/caliber marking along with the Rampant Colt. The early production serial number is on the right of the frame. The left of the trigger guard is marked "1" over "VP", and the right is marked "99". The blued barrel has a polished chamber hood and is unmarked. It is fitted with blade front and notch rear sights, wide checkered hammer, long grip safety, arched checkered mainspring housing, checkered walnut grips, and a two-tone .38 Super Auto magazine. Manufacturer: Colt Model: Super 38 BBL: 5 inch round Gauge: 38 Super Finish: blue Grips: walnut Serial Number2911 Class: Curio & Relic Handgun

Lot: 193 - Police Shipped Colt Model 1908 Pocket Hammerless Pistol

Highly Attractive Police Department Shipped Colt Model 1908 Pocket Hammerless Semi-Automatic Pistol with Ivory Grips and Factory Letter Manufactured in 1937, this is a highly attractive example of Colt's Model 1908 Pocket Hammerless pistol documented as shipped to an Ohio police department. The included factory letter lists this pistol in .380 caliber with a 3 3/4 inch barrel, nickel finish, and grips not listed when shipped to Chas Hennessey of the Police Department of the City of Toledo, Ohio, on 16 April 1937 as the only gun of its type in the shipment. A Charles "Spike" Hennessey is listed in period newspapers as a captain of the Toledo Police Department and also having a son named Charles Hennessey who became a deputy with the department. The younger Hennessey is listed as having been shot while attempting an arrest in 1938 and appears to have survived the incident. It is unclear if the recipient of this pistol was the younger or elder Charles Hennessey. It has the standard Colt markings. It is fitted with a blade front sight, rounded top notch rear sight, and a pair of smooth ivory grips with Colt medallions. Includes an unmarked Kraft type box. Manufacturer: Colt Model: 1908 BBL: 3 3/4 inch round Gauge: 380 ACP Finish: nickel Grips: ivory Serial Number126237 Class: Curio & Relic Handgun

Lot: 194 - Very Fine Colt Model 1902 Military Semi-Automatic Pistol

Very Fine Colt Model 1902 Military Semi-Automatic Pistol Manufactured in 1909. Features oval blade front and rounded notch rear sights, early production mirror polish blue finish, a casehardened and checkered spurred hammer which is consistently found on pistols over serial number 33,000, the two-line, two-block Colt patent dates and address on the left of the slide and caliber designation on the right, checkered slide stop, the serial number on the left of the frame, "triangle/VP" and "W" marked on the left of the trigger guard, and a lanyard loop on the lower left side of the grip frame. Fitted with a pair of Colt banner and circled Rampant Colt marked checkered hard rubber grips and a later production replacement "MIL/COLT/CAL.38" marked blued magazine. Manufacturer: Colt Model: 1902 Military BBL: 6 inch round Gauge: 38 ACP Finish: blue/casehardened Grips: hard rubber Serial Number32894 Class: Curio & Relic Handgun

Lot: 195 - Pre-WWII Era Colt Government Model Pistol with Factory Letter

Special Order Pre-World War II Era Colt Government Model Semi-Automatic Pistol with Factory Letter The included factory letter lists this pistol's specific date of manufacture as June 29, 1931, and confirms its configuration, with a 5 inch barrel in .45 caliber, blue finish, type of grips not listed, along with the special features of a match barrel, a 1/10" front sight, and a 4 1/2 to 4 3/4 lb. trigger pull, when sold to the Bolles-Brendamour Company of Cincinnati, Ohio, and sent as the only pistol of its type in a shipment to Kruse Hardware Company in Cincinnati, Ohio, on July 10, 1931, under Colt Factory Order #10264/1. Features fixed rounded blade front and squared notch rear sights, the Colt address and patent dates in two line on the left of the slide, the caliber designation followed with a Rampant Colt on the right of the slide, a matching "161/758" serial number behind the firing pin stop, a blued barrel with bright chamber hood marked circle "M.B" on the lug, the model designation and "C" prefix serial number on the right of the frame, "1" over a Colt triangle "VP" factory proof on the left of the trigger guard, and "60" on the right of the trigger guard. Fitted with a short milled and checkered trigger, a checkered slide catch, checkered wide-spur hammer, checkered thumb safety, a checkered arched mainspring housing with lanyard loop, a pair of checkered walnut grips, and an unmarked two-tone blued magazine. Manufacturer: Colt Model: Government BBL: 5 inch round Gauge: 45 ACP Finish: blue Grips: walnut Serial NumberC161758 Class: Curio & Relic Handgun

Lot: 196 - Pre-WWII Special Order Colt Woodsman Match Target Pistol

Excellent Pre-World War II Documented Special Order Colt First Series Woodsman Match Target Semi-Automatic Pistol with Box and Factory Letter Manufactured in 1940, this is an excellent example of a pre-World War II Colt Woodsman Match Target pistol that was special ordered by a discerning customer. Only around 15,100 of these first series Match Target pistols were produced, with far fewer being special ordered and remaining in excellent condition to this day like this example has. The included factory letter lists the pistol in .22 caliber with a 6 1/2 inch barrel, blue finish, and special ordered "Regular Woodsman stocks" when sold to Leo Pfeil of Knox, Indiana, and shipped to Van Camp Hardware & Iron Company in Indianapolis, Indiana, on 26 March 1940 as the only gun of its type in the shipment. A cigarette advertisement in 1941 Indiana newspapers indicates there was a Leo Pfeil from Knox who was a barber. The top of the barrel has the standard two-line address and patent marking. While the Match Target bullseye, The Woodsman, and caliber markings are on the left. The serial number is marked on the butt near the magazine well and the base of the magazine has the correct Match Target markings. It is fitted with an adjustable blade front sight, adjustable notch rear sight, and the special ordered "Regular Woodsman" checkered walnut grips. Includes an unnumbered correct factory box and screwdriver. Manufacturer: Colt Model: Match Target Woodsman BBL: 6 1/2 inch slab sided Gauge: 22 Long Rifle Finish: blue Grips: walnut Serial NumberMT7706 Class: Curio & Relic Handgun

Lot: 197 - First Year Colt First Series Woodsman Match Target Number "MT57"

Exceptional Pre-World War II Early First Year Production Colt First Series Woodsman Match Target Model Semi-Automatic Pistol, Serial Number "MT57", with Case Manufactured in 1938, the first year of production for the Colt First Series Match Target Woodsman pistols (approximate serial range from MT1 to MT2899) per page 82 of "Blue Book Pocket Guide for Colt Dates of Manufacture" by Wilson and Allen, with this example produced near the very start of production with the serial number "MT57". Features pinned Patridge blade front and adjustable notch rear sights, along with standard Colt factory markings including the "MATCH/bullseye/TARGET" marked on the left of the barrel. Fitted with a desirable one-piece "elephant ear" checkered walnut grip with silver Colt medallions inserts, and a two-tone blued magazine properly marked "COLT WOODSMAN/CAL.22 L.R./MATCH TARGET MOD." on the base. Includes a period custom walnut case with a green felt interior fitted for the pistol, a screwdriver, manual, and a consignor provided data sheet on the pistol. Manufacturer: Colt Model: Match Target Woodsman BBL: 6 5/8 inch slab side Gauge: 22 Long Rifle Finish: blue Grips: walnut Serial NumberMT57 Class: Curio & Relic Handgun

Lot: 198 - WWII Era Colt First Series Woodsman Sport Pistol with Box

Excellent World War II Era Colt First Series Woodsman Sport Semi-Automatic Pistol with Original Box Manufactured in 1941, this is an outstanding example of a World War II era production Colt Woodsman Sport pistol. Due to their recreational use, these pistols are rarely found today in such high condition, particularly with their original box. This example has the standard Colt markings. The matching serial number is on the front grip strap and inside the slide. It is fitted with an adjustable blade front sight, adjustable notch rear sight, and a pair of checkered walnut grips. Includes the original box with an additional end label listing the 4 1/2 inch barrel and adjustable sights. Manufacturer: Colt Model: Woodsman BBL: 4 1/2 inch round Gauge: 22 Long Rifle Finish: blue Grips: walnut Serial Number152446 Class: Curio & Relic Handgun

Lot: 199 - Pre-World War II Colt .38 Super Match Semi-Automatic Pistol

Scarce and Highly Desirable Pre-World War II Colt .38 Super Match Semi-Automatic Pistol with Box Manufactured in 1937, this is a scarce and highly desirable Colt .38 Super Match pistol. According to "The Book of Colt Firearms" by Sutherland and Wilson, it is estimated that only around 3,000 to 5,000 of these Super Match .38 pistols were manufactured from 1934-1947. These .38 Super Match pistols were manufactured concurrently with the standard Colt .38 Supers, except they featured a deluxe, hand honed action and checkered match trigger with a hand polished super smooth trigger pull. Additionally, they received a highly polished Colt factory blued finish and all checkered grip panels. The right side of the matching number slide is marked "SUPER MATCH/COLT SUPER .38/AUTOMATIC" followed by the Rampant Colt motif. The opposite side of the slide has Colt's address marking above the patent dates. The serial number is on the right of the frame. The upper left front of the trigger guard is marked with "T/VP", while the right side is marked "77". The blued barrel has a polished chamber hood, "SUPER 38 AUTO" on the lower left, and a circled "MB" on the left of the lug. It is fitted with blade front and adjustable notch rear sights, checkered slide stop, thumb safety, polished firing pin stop, arched checkered mainspring housing, a wide checkered hammer, checkered walnut grips, and a two-tone magazine with Colt Super .38 markings on the base. Includes a correct period factory box with additional end label marked "SUPER MATCH" and "ADJUSTABLE/SIGHT". Manufacturer: Colt Model: Super 38 BBL: 5 inch round Gauge: 38 Super Finish: blue Grips: walnut Serial Number28147 Class: Curio & Relic Handgun

Lot: 200 - Pre-WWII Era Colt Model 1908 Pocket Hammerless Pistol with Box

Excellent Pre-World War II Era Colt Model 1908 Pocket Hammerless Semi-Automatic Pistol with Original Box Manufactured c. 1932, featuring fixed rounded blade front and notch rear sights, the Colt address and patent dates marked in two lines followed with a Rampant Colt behind the serrations on the left of the slide, the caliber designation marked in two lines on the right of the slide, a matching "114607" serial number marked on the underside of the slide, a blued barrel with bright chamber hood, the serial number on the left of the frame, "W" over a Colt triangle "VP" factory proof on the left of the trigger guard, and "75" on the right of the trigger guard. Fitted with a pair of checkered walnut grips with nickel Rampant Colt medallion inserts and a two-tone blued magazine marked "CAL.380/COLT" on the base. Includes the original Colt maroon box with a matching serial number written on the underside in pencil (along with a "11/23/32" date) and appropriate end labels, containing a bore brush and November 2, 1932, dated correspondence from Colt's Fire Arms Division, along with a consignor provided data sheet on the pistol. Manufacturer: Colt Model: 1908 BBL: 3 3/4 inch round Gauge: 380 ACP Finish: blue Grips: walnut Serial Number114607 Class: Curio & Relic Handgun

Lot: 201 - WWI Era Factory Prototype Winchester "G19P" Model 1911 Pistol

Extremely Scarce Well-Documented World War I Era Factory Prototype Winchester "G19P" Model 1911 Semi-Automatic Pistol with Cody Firearms Museum Letter Manufactured c. 1918, this is an extremely scarce example of one of a very small number of the John Browning designed Model 1911 pistols which were made during the initial tooling up phase of a U.S. government contract for 500,000 pistols from the

Lot: 202 - Factory Tool Room Sample Colt Model 1900 "Sight Safety" Pistol

Scarce Factory Tool Room Sample Colt Model 1900 "Sight Safety" Semi-Automatic Pistol Manufactured c. 1900-1902, this is an extremely scarce factory tool room example of the desirable Colt Model 1900 "Sight Safety" pistol. The first Browning-designed automatic pistol to hit the American market, the Model 1900 is a critical step in 20th century arms development, starting the chain of progressive refinements and evolutions that would lead to the genre-defining 1911/Government Model semi-automatic pistol. Unfinished examples such as this one were used in different parts of the Colt factory during different phases of production for comparing measurements and testing various components. This particular example appears to have been used for inspection of and testing the fit of magazines, as the left of the frame is marked "For Magazine Ins". Like most examples of "tool room" guns, this pistol remains in an unfinished state, bearing none of the typical markings, a rough polish, and no finish, being only completed to the level needed for testing the specific component. The left side of the slide is hand marked with a faint name which appears to read "G. O. POCK". It is not fitted with a left grip panel so the magazine can be viewed when it's inserted and there is a small additional milled "skeletonized"/cutaway window for viewing the magazine retention spring. It is not fitted with a front sight blade. It is fitted with a non-functioning rear sight safety and a standard checkered hard rubber right grip panel with "COLT" banner and Rampant Colt. The magazine has the typical nickel finish and 1884 patent date on the base. Manufacturer: Colt Model: 1900 BBL: 6 inch round Gauge: 38 ACP Finish: bright Grips: hard rubber Serial NumberNSN Class: Curio & Relic Handgun

Lot: 203 - Factory Engraved & Inscribed Colt New Service DA Revolver

Rare Historic Factory Engraved Colt New Service Double Action Revolver Inscribed to a U.S. Army Judge Advocate with Factory Letter Manufactured in 1907. This revolver's factory letter lists it as factory engraved and featuring the inscription "Guy G. Palmer USA" on the back strap. The letter also confirms the barrel length, caliber, and finish, and indicates it had pearl grips when shipped to Captain Guy G. Palmer on February 15, 1907. Only 75 Colt New Service revolvers were factory engraved, and fewer than 50 were engraved with a person's name per "The Book of Colt Firearms" by R.L. Wilson. The "B" coverage engraving was likely done by Cuno Helfricht. The majority of the engraving consists of broad scrollwork on a punch dot background. A circle, star and dash motif surrounds the hammer, the Colt barrel address/patent dates marking is inside an entwining line border, the caliber barrel marking is inside a banner surrounded by the scrollwork, a cross hatching pattern is under the cylinder on the left side of the frame, and there are floral blossoms and zig-zag line motifs. The ivory grips are carved in the Colt style with the large "COLT" logo at the top. Guy George Palmer (1867-1959) had over 30 years of U.S. Army service which began in 1889. With his promotion to major in 1915, Palmer became a judge advocate. While stationed in the Philippines, Palmer tried a murder case in 1902 and also made several maps of the area for the Army. His duties and accomplishments during World War I remain unknown at the time of this writing. However, he was promoted to colonel with his last reported transfer to the 2nd Infantry on 17 Sept. 1916 and remained there when the unit became the 2nd Infantry Division until the end of the war. He retired as a full colonel in 1920. Palmer became a professor of military science and tactics at the University of California, Southern Division through 1926. Manufacturer: Colt Model: New Service BBL: 7 1/2 inch round Gauge: 45 Long Colt Finish: nickel Grips: carved ivory Serial Number17170 Class: Curio & Relic Handgun

Lot: 204 - Demonstration/Presentation Remington-Rand Model 1911A1 Pistol

Rare and Highly Desirable, Serial Number "139", Demonstration/Presentation Remington-Rand Model 1911A1 Semi-Automatic Pistol with Box Manufactured c. 1943 to 1945, this is a rare Model 1911A1 "numbers only demonstration pistol" that was produced by Remington-Rand. These "demonstration pistols" were manufactured to show employees the finished Model 1911A1 pistol, explain how it was used, and emphasize the importance of every aspect of manufacturing in the functioning of the pistol as a whole. Remington-Rand manufactured only approximately 145 demonstration pistols in a separate series beginning with serial number "1". The pistols had a parkerized finish and the serial numbers were stamped on the pistols after it was applied. The pistols did not have military nomenclature, inspection, proof, or "U.S. Property" marks on the slide or frame. After the war, many of these pistols were subsequently presented to Remington-Rand officials and employees. These demonstration pistols are described on p. 313 of "Colt .45 Service Pistols: Models of 1911 and 1911A1" by Clawson and an example, serial number 131, is pictured on p. 314. These pistols are also discussed on p. 85 of "U.S. Military Automatic Pistols 1920-1945" by Meadows. The "ERRS" marked Remington-Rand pistols are also discussed in both books, which were factory experimental pieces used during the manufacturing process. This pistol appears to have been originally made as an "ERRS" example before being finished out and factory numbered in the "demonstration" series. The only visible external markings on the pistol are the two-line Remington-Rand address on the left of the slide, the serial number "139" on the right of the frame, and the very faint traces of an "R" and an "S" from the previous "ERRS" marking. The full blue barrel is marked "P" and "HS" on the left and right of the lug. It is fitted with blade and notch sights, short stamped trigger, narrow checkered hammer, long grip safety, a serrated arched mainspring housing, lanyard loop, checkered Keyes Fibre grips, and it is not currently fitted with a magazine. Includes a correct Remington-Rand pattern Kraft box with a factory wrapped magazine. Manufacturer: Remington-Rand Model: 1911A1 BBL: 5 inch round Gauge: 45 ACP Finish: parkerized Grips: plastic Serial Number139 Class: Curio & Relic Handgun

Lot: 205 - 1913 Production Colt Model 1911 U.S. Navy Contract Pistol

Desirable 1913 Production Colt Model 1911 U.S. Navy Contract Semi-Automatic Pistol This is a fine example of a U.S. Navy contract Model Colt 1911 with the highly desirable "U.S. NAVY" marked slide. This example was shipped on July 30th, 1913, to the U.S. Navy Storekeeper, US Navy Yard, Brooklyn, N.Y., in a block of 1,000 pistols. These Navy marked pistols are very scarce and were only manufactured through the very early part of 1915 with all subsequent remaining Navy shipments having the standard "U.S. Army" marked slides. The slide is marked on the left side with the standard Colt factory two line, two block address/patent marks with the circled Rampant Colt behind the serrations and on the right side with the noted "MODEL OF 1911. U.S. NAVY" (with serifs) markings. It has the correct early, narrow front sight blade, with the correct rounded top rear sight. The frame is stamped with the intertwined initial "WGP", for Walter G. Penfield, U.S. Ordnance Inspector, along with "UNITED STATES PROPERTY" on the left side, with the serial number on the right side. It has the early features such as the early wide hammer with border-less checkering, the early pattern thin, thumb safety with undercut, the long trigger with the smooth face, the short grip safety, and flat mainspring housing with the lanyard loop. It is fitted with an early Springfield Armory replacement barrel that is stamped with "S" and "P" on the left side of the lug. The slide stop is a later production reparkerized replacement. It has the standard checkered grips with diamond patterns around the screws. Complete with a two-tone magazine with a lanyard loop on the base. Manufacturer: Colt Model: 1911 BBL: 5 inch round Gauge: 45 ACP Finish: blue Grips: walnut checkered Serial Number39491 Class: Curio & Relic Handgun

Lot: 206 - WWII Presentation Inscribed U.S. Ithaca Model 1911A1 Pistol

Scarce, Well-Documented, Historic World War II Presentation Inscribed U.S. Ithaca Model 1911A1 Semi-Automatic Pistol Serial Number "ITHACA EXP.#3" Manufactured in 1945, this is a scarce presentation Model 1911A1 from Ithaca Gun Co. inscribed to Lieutenant Henry A. Carey Jr. who was born in 1920 in Ithaca, New York. He is listed as having been a fighter pilot in the U.S. Navy during World War II and an ace credited with downing seven enemy aircraft in combat. He is also noted as having been awarded the Distinguished Flying Cross. The presentation of this pistol indicates that they special pistols were awarded by the company to local heroes of World War II. On p. 128 of "U.S. Military Automatic Pistols 1920-1945" by Meadows it is noted that three of these presentation pistols were produced serial numbered "XP.#1", "XP.#2", and "EXP.#3", all of which were inscribed with the names of their recipients. These pistols are believed to have been assembled in conjunction with a series of 50 pistols with "I.G." serial number prefixes, which were intended for presentation to company officials. This particular pistol is pictured on p. 133 of the previously mentioned book. The pistol itself shows most of the standard markings and features of the standard production Ithaca Model 1911A1 pistols. The left of the slide is marked with the two-line Ithaca, New York address while the right is unmarked. The right of the frame is factory engraved with the inscription "LIEUT. HENRY A. CAREY JR" over the special serial number "ITHACA EXP.#3". The barrel is marked "P" and "HS" on the left and right of the lug respectively. It is fitted with blade and notch sights, narrow checkered hammer, long grip safety, a pair of checkered Keyes Fibre grips, and an "S" marked full blue magazine. Manufacturer: Ithaca Gun Co Model: 1911A1 BBL: 5 inch round Gauge: 45 ACP Finish: parkerized Grips: plastic Serial NumberITHACAEXP.#3 Class: Curio & Relic Handgun

Lot: 207 - U.S. Marine Corps Contract Colt Model 1911 Semi-Automatic Pistol

Highly Desirable and Exceptional Documented 1913 Production U.S. Marine Corps Contract Colt Model 1911 Semi-Automatic Pistol Manufactured in 1913, this pistol was included in the second shipment of Model 1911 pistols to the United States Marine Corps Depot Quartermaster in Philadelphia, Pennsylvania, which contained 1,250 pistols in the serial number range of 36401-37650 and was sent on 9 July 1913. The first shipment of to the Marine Corps contained 300 pistols and occurred on 6 May 1912. The 1913 shipment this pistol was in is listed on p. 515 of "U.S. Military Automatic Pistols: 1894-1920" by Meadows. During the course of the World War I era (1912-1918), Colt shipped a total of approximately 9,950 Model 1911 pistols to the Marine Corps and at least 25 Government Models, making these pistols incredibly scarce in comparison to their Army shipped counterparts. Unlike the Navy contract Model 1911 pistols, many of which have a special slide marking, those that were shipped to the Marine Corps had the standard Army nomenclature, as is present on this example. The left side of the slide is marked with the two-line, two-block address and patent markings with the Rampant Colt behind the serrations and "MODEL OF 1911. U.S. ARMY" on the right. The frame is marked with the serial number on the right and the U.S. property marking and circled "WGP" inspection mark on the left. The full blue barrel is marked on the chamber hood with "P H" and "5" on the bottom in front of the lug. It is correctly fitted with blade and rounded top notch sights, checkered slide stop, thumb safety, and wide hammer, short grip safety, smooth flat mainspring housing with lanyard loop, a pair of diamond pattern checkered grips, and a two-tone magazine with a pinned base with a lanyard loop. Manufacturer: Colt Model: 1911 BBL: 5 inch round Gauge: 45 ACP Finish: blue Grips: walnut Serial Number37314 Class: Curio & Relic Handgun

Lot: 208 - Excellent World War II U.S. Winchester Model 12 Trench Shotgun

Excellent World War II U.S. Winchester Model 12 Slide Action Trench Shotgun Offered here is a spectacular example of a highly desirable 1943 production factory parkerized Winchester Model 12 trench gun. Original high condition examples of these are rare today given their very high usage rate. Approximately 6,800 Model 12 trench shotguns were produced by Winchester during World War II for the war effort per page 6 of "U.S. Winchester Trench and Riot Guns" by Joe Poyer. The trench shotgun saw effective use in the hands of the U.S. military in the trenches of World War I, for clearing Japanese bunkers and fortifications in the Pacific Theater of World War II, in the Korean War, in the jungles of the Vietnam War, the Gulf War, and even into the Global War on Terror in the 21st century. They are simply one of the most effective combat tools in American service and are a must have for U.S. military collectors today. Of the small handful of the different primary issue trench shotguns of World War II, the Winchester Model 12 is one of the most desirable today. The Winchester Model 12 and Model 97 trench shotguns were the primary U.S. combat shotguns used in World War II and Korea and into Vietnam by both the U.S. Marine Corps and Army. The barrel is roll stamped with the two-line Winchester address/patent dates followed by "-WINCHESTER-/-TRADE MARK-" and "MODEL 12-12 GA.-2 3/4 CHAM./CYL." The top breech end of the barrel has a small flaming bomb, and the bottom is "43" dated. Both the barrel and front edge of the receiver are stamped with the oval bordered Winchester "WP" factory proof mark. The right of the receiver is also roll stamped with "U.S." and the flaming bomb. The matching serial number is roll stamped on the underside of the barrel extension and receiver. It has a four-hole heat shield with bayonet lug assembly marked "W" on the left side, a serrated walnut pump handle, pistol grip walnut stock, and a black checkered hard rubber buttplate with the circular Winchester logo. The stock has a sling swivel and a larger bail wire sling swivel is located on the bayonet lug. 14 inch length of pull. Manufacturer: Winchester Model: 12 BBL: 20 7/8 inch round Stock: walnut Gauge: 12 Finish: parkerized Serial Number1031555 Class: Curio & Relic Long Gun

Lot: 209 - World War II U.S. Johnson Automatics Mfg. Co. Model 1941 Rifle

World War II U.S. Johnson Automatics Mfg. Co. Model 1941 Semi-Automatic Rifle with Bayonet Approximately 21,400 Johnson Model 1941 semi-automatic rifles were manufactured c. 1940-1945, and approximately 750 were procured by the U.S. Marine Corps per "Johnson's Rifles and Machine Guns" by Bruce Canfield. This rifle features a winged blade front sight and range adjustable rear sight (marked "M2" and graduated from 100 to 1000 meters), triangle enclosed "CRANSTON/ARMS/CO." and five-pointed Dutch star stamp as commonly seen on Johnson rifles on the right rear of the receiver, four-line "CAL. 30-'06 SEMI-AUTO./"JOHNSON AUTOMATICS"/MODEL OF 1941/MADE IN PROVIDENCE, R.I., U.S.A." factory markings above the serial number on top of the receiver, and five-line U.S. and foreign patent dates roll-marked to the rear. ".30-'06/41" marked on the front of the barrel retainer. The bolt is correctly marked with a non-matching serial number "C3764" (it was standard for numbered components on Johnson rifles to not match), and the barrel and its extension are numbered "8486F" on the underside. "J.A./.30-06" and a small circled sword proof are also marked on the barrel. It has a smooth oiled walnut forend and buttstock with checkered steel buttplate. Includes a spike bayonet, leather scabbard stamped with number "1961", and a No-Buckl tan canvas web sling. Manufacturer: Johnson Automatics MFG Co Model: 1941 BBL: 22 inch round Stock: walnut Gauge: 30-06 Springfield Finish: parkerized Serial NumberB2627 Class: Curio & Relic Long Gun

Lot: 210 - World War II U.S. Stevens 520-30 Slide Action Riot Shotgun

Excellent World War II U.S. Stevens 520-30 Slide Action Riot Shotgun This is an excellent example of a World War II U.S. Army contract Stevens Model 520-30 shotgun in riot gun configuration. The left of the barrel has the three-line Stevens/Savage address along with the two-line gauge markings. Choke gauges at cylinder. The left of the receiver is stamped "MOD. 520-30", and it has the correct "P" and Ordnance bomb stamps on the left breech of the barrel and left front edge of the receiver. It has a blue finish with smooth forearm and pistol grip stock with a black plastic buttplate. Manufacturer: Stevens J Arms Co Model: 520-30 BBL: 20 inch round Stock: walnut Gauge: 12 Finish: blue Serial Number48887 Class: Curio & Relic Long Gun

Lot: 211 - Outstanding WWII U.S. Remington Model 11 Semi-Automatic Shotgun

Outstanding World War II U.S. Remington Model 11 Semi-Automatic Riot Shotgun Offered here is an excellent original example of a World War II U.S. Remington Model 11 riot shotgun with a "KMM" May 1943 date code and small anchor proof stamp on the left breech area of the matching numbered barrel. It features the 20 inch riot barrel, single bead front sight, 2 3/4 inch chamber, choke marked cylinder, and "U.S." ahead of flaming bomb proofs on both the barrel and receiver, and the receiver also has the "MILITARY FINISH" marking. Matching serial numbers marked on the left of the receiver and bottom of the barrel beneath the forend. Fitted with a smooth forearm and pistol grip stock with an unevenly stamped crossed cannons cartouche and "FJA" (Frank J. Atwood) inspection initials on the left of the buttstock and a Remington Bakelite serrated buttplate. 14 inch length of pull. Manufacturer: Remington Arms Inc Model: 11 BBL: 20 inch round Stock: walnut Gauge: 12 Finish: blue Serial Number487774 Class: Curio & Relic Long Gun

Lot: 212 - USA-F Marked Hunter Arms/L. C. Smith 16 Ga Field Grade Shotgun

Desirable "USA-F" Marked Hunter Arms/L. C. Smith 16 Gauge Field Grade Double Barrel Shotgun Manufactured in 1942 as one of 1,506 L. C. Smith Field Grades purchased by the U.S. government Rochester Ordnance District between May 9, 1942, and April 9,1943, for the purpose of training aerial gunners during World War II per page 113 of "Combat Shotguns" by Bruce Canfield. It is possible that it was shipped to the Ordnance Department by mistake and seldom used given a likely lack of 16 gauge shells on base, accounting for its very fine condition today. Built with blued barrels featuring dual brass bead sights on the matted flat solid rib, "L. C. SMITH Field GRADE" and "HUNTER ARMS CO. INC. M'F'R'S' FULTON, N.Y., U.S.A." marked on the right and left tubes respectively, "USA-F" marked on both barrels ahead of the flats, choke constrictions of .017/.030 inches, and chambers measured 2 3/4 inches with extractor. The barrels are fitted to the casehardened sidelock action which is unadorned aside from "L. C. SMITH" marked on either lockplate. The gun features double triggers and an automatic tang mounted safety. The gun is fitted with a plain figured and flat top multi-point checkered splinter forend and pistol grip stock with a hard rubber buttplate. Stock measurements: 1 3/8 inch drop at comb; 2 3/8 inch drop at heel; 14 1/16 inch length of pull; weight 6 lbs. 12 oz. Manufacturer: Hunter Arms Company Model: Field BBL: 28 inch solid rib Stock: walnut Gauge: 16 Finish: blue/casehardened Serial NumberFW199396 Class: Curio & Relic Long Gun

Lot: 213 - World War II U.S. Standard Products M1 Semi-Automatic Carbine

World War II U.S. Standard Products M1 Semi-Automatic Carbine Manufactured in early 1944 from the only production block (serial number range 1,982,520 to 2,352,519) by Standard Products from April 1943 to May 1944. Underwood supplied "1-44" dated barrel, unmarked type I barrel band, "N" marked front sight, struck markings on the L-flip peep rear sight, "S" and "61" marked type III operating rod, "17/S" blued flat-top bolt, and a "S" and "17-A" marked milled trigger housing, with a personal identifier type number electro stenciled onto the bottom of the trigger guard, unmarked push button safety, "S W" type III magazine catch, "SW" sear, and "SW" type III hammer. Fitted with a S-HB marked two-rivet walnut handguard and a "high-wood" walnut stock with "S-HB" marked in the sling channel, an "ordnance wheel" stamp on the right of the butt, and a Standard Products marked recoil plate along with a "SL" blued magazine, web sling, and metal oiler. Includes a completed Carbine Club data sheet. Note: This item features a high-capacity magazine which has a capacity above 10 rounds and is considered an assault weapon in some states. It cannot be sold or transferred to individuals in CA, CT, DC, DE, IL, MD, MA, NJ, NY, RI, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Standard Products Model: M1 Carbine BBL: 18 inch round Stock: walnut Gauge: 30 Carbine Finish: parkerized/blue Serial Number2190551 Class: Curio & Relic Long Gun

Lot: 214 - U.S. Marine Corps Marked H&R MC-58 (Model 65) Training Rifle

Excellent and Scarce U.S. Marine Corps Property Marked Harrington & Richardson MC-58 (Model 65) Semi-Automatic Training Rifle Designed as a low-powered companion to the U.S. M14 Rifle, the MC-58 uses a H&R Reising Model 65 receiver fitted out with similar sights and controls as the M1/M14. The U.S. Marine Corps ordered these training rifles c.1958, with about 3,500 delivered. Features a fixed winged blade front sight and Redfield micrometer peep rear sight attached to the left of the receiver, a M1/M14 pattern safety lever in the front of the over-sized trigger guard, along with "USMC PROPERTY" markings on top of the barrel and receiver. Fitted with a pistol grip profile birch stock with a small boxed "DoD eagle" stamp on the grip. Includes a Boyt leather sling. Manufacturer: Harrington & Richardson Inc Model: MC-58 BBL: 23 inch round Stock: walnut Gauge: 22 Long Rifle Finish: parkerized Serial Number8713 Class: Curio & Relic Long Gun

Lot: 215 - 1912 Produced U.S. Navy Contract Colt M1911 Pistol Number "1568"

Highly Desirable 1912 First Year Production Four-Digit Serial Number "1568" U.S. Navy Contract Colt Model 1911 Semi-Automatic Pistol Manufactured in 1912, the first official year of production for the U.S. military contract Colt Model 1911 pistols, with this four-digit example being from the U.S. Navy contract. Only 15,037 Colt Model 1911 pistols were manufactured with the desirable "MODEL OF 1911 U.S. NAVY" roll-mark on the slide, which was discontinued in April 1915 in favor for the standard U.S. Army nomenclature, of which there were approximately 578,473 manufactured, making the navy marked variation comparatively very scarce. This pistol falls within the range of 500 pistols (serial numbers 1,501 to 2,000) in the second navy contract shipment sent to the U.S. Navy Yard of Brooklyn, New York, on April 10, 1912, as shown in the table on page 158 of "U.S. Military Automatic Pistols: 1894-1920" by Meadows. It has fixed rounded blade front and notch rear sights, the two-line Colt patent dates and address in two block on the left of the slide followed with a circled Rampant Colt behind the serrations, the U.S. Navy model designation on the right of the slide, a later production replacement parkerized barrel with "P" over "H" on the chamber hood and "P" on the lug, the U.S property marking and circled "WGP" inspection monogram on the left of the frame, and the early "No." prefix serial number (discontinued around serial number 4,501) on the right of the frame. Fitted with a long smooth trigger, checkered slide catch and thumb safety along with a wide spur hammer, a flat smooth mainspring housing with a lanyard loop on the base, a pair of "double diamond" pattern checkered walnut grips, and an early pattern blued magazine with a pinned lanyard loop floor plate. Manufacturer: Colt Model: 1911 BBL: 5 inch round Gauge: 45 ACP Finish: blue Grips: walnut Serial Number1568 Class: Curio & Relic Handgun

Lot: 216 - USMC Colt Model 1909 Revolver with Holster and Factory Letter

Very Scarce and Desirable U.S. Marine Corps Contract Colt Model 1909 New Service Double Action Revolver with Fine U.S.M.C. Holster and Factory Letter This is one of only 1,300 Colt Model 1909 New Service double action .45 caliber revolvers ordered by the U.S. Marine Corps through the U.S. Navy in May 1909. The included factory letter lists the revolver as shipped on November 30, 1909, to the U.S. Marine Corps Depot Quartermaster in Philadelphia, Pennsylvania, with a 5 1/2 inch barrel, blue finish, and checkered walnut grips, as part of 400 guns of the same type in the shipment, with a special further notation in the factory letter stating, "The revolvers with serial numbers 26001 to 27000 were assigned butt numbers in the range of 1001 to 2000." In addition to the "U.S.M.C." markings, the U.S.M.C. Model 1909 revolvers have a narrower round profile butt and are fitted with hand-checkered two-piece walnut grips. The butt is roll-stamped "U.S./M.C." in two lines behind the lanyard swivel and has the Marine Corps serial number "No/1/258" stamped in two lines ahead of the swivel. The top of the barrel has the standard two-line address and patent dates and the left is marked "COLT D.A. 45". The left side of the frame behind the cylinder latch has the Rampant Colt trademark on top of a stylized "C". The Colt serial number "26258" is stamped on the inside of the frame and cylinder crane, and also marked in pencil on the interior of the grip panels. The partial serial number "6258" is stamped on the rear face of the cylinder latch. The Colt triangle "VP" proof mark is stamped on the left side of the frame above the front trigger guard bow and a "3" assembler's mark is above the rear trigger guard bow. Includes a scarce "U.S.M.C." embossed leather holster, of which only 600 were manufactured per page 362 of "U.S. Military Holsters and Pistol Cartridge Boxes" by Meadows. Manufacturer: Colt Model: 1909 BBL: 5 1/2 inch round Gauge: 45 Long Colt Finish: blue Grips: walnut Serial Number26258 Class: Curio & Relic Handgun

Lot: 217 - Historic Benchmark Colt Transitional Model 1911/1911A1 Pistol

Outstanding Benchmark U.S. Colt Transitional Model 1911/1911A1 Semi-Automatic Pistol Documented to World War II Veteran Dr. Byford F. Heskett with Holster, Magazine Pouches, Original Manuals, Research, and Factory Letter Manufactured in 1923, this is a truly astounding, benchmark example of the highly desirable "Transitional" variation of the legendary U.S. Colt Model 1911 pistol. These

Lot: 218 - Prototype U.S Rock Island Arsenal M15 General Officer Pistol

Rare Unserialized Prototype U.S Rock Island Arsenal M15 General Officer Semi-Automatic Pistol Developed in the early 1970s, the Rock Island M15 was conceived in response to a shortage of Colt 1903/1908 pistols in Army inventory for issue to generals as a distinctive sidearm. Working from stocks of 1911/1911A1 components, Rock Island essentially produced an in-house custom variant of the Colt Combat Commander pistol. This particular example as an unserialized prototype that was produced during the development phase and appears to have never been issued. The overall markings are consistent with general production of the M15, though the serial number reads "GO Model No." with no following digit. The initial prototype used "GO Model 1" as the serial number marking, and after a discussion with higher brass, who were concerned that "Model X" would be read as a model designation instead of a serial number, the arrangement "Serial No. GO" was used as the prefix for production M15s, the first two issued being "Serial No. GO 1" and "Serial No. GO 2" respectively. This particular pistol appears to have been produced during the period after the initial prototype was made and prior to the final order for the serial number marking being settled upon. A very similar prototype pistol can be seen on page 121 of "U.S. Military Automatic Pistols 1945-2012" by Edward Scott Meadows, where it is called out as a "General Officer prototype with third type slide and serial number markings". That pistol and this one appear nearly identical apart from the front sight blade, which appears taller and is serrated on the example in the book. The left of the slide is marked with the standard "General Officers Model/RIA" marking, while the right of the frame has "GO Model No.", both filled with white. The chamber hood of the barrel has faint National Match type markings. It is fitted with a smooth ramped blade front sight and a notch rear sight, a National Match barrel bushing marked "7267718/NM", checkered slide stop, serrated thumb safety, checkered hammer, checkered front strap, serrated arched mainspring housing with a lanyard loop base, serrated adjustable trigger, and a pair of checkered walnut grips with blank name plate on the left and a Rock Island Arsenal medallion on the right. The full blue magazine is marked "C-S" on the baseplate. Manufacturer: Rock Island Arsenal Model: M15 BBL: 4 1/4 inch round Gauge: 45 ACP Finish: blue Grips: walnut Serial NumberGO Model No. Class: Curio & Relic Handgun

Lot: 219 - Historic ID'd WWII U.S. Colt Model 1903 General Officer's Pistol

Historic World War II U.S. Property Marked Colt Model 1903 Pocket Hammerless General Officer's Semi-Automatic Pistol Identified to Brigadier General John S. Hughes with Holster and Certificates of Ownership Manufactured in 1942, this is a fine example of an identified U.S. Colt Model 1903 General Officer's pistol. A 7 May 1965 dated letter from Major General Roland B. Anderson at the Rock Island Arsenal lists this pistol by serial number as being issued to Brigadier General John S. Hughes at the headquarters of the 5th Infantry Division Artillery at Fort Carson, Colorado. Also included is a certificate of ownership from the Department of the Army again listing the pistol by serial number and noting that it was issued to Brigadier General Hughes. The family of Brigadier General Hughes notes that he was issued this pistol upon promotion to assistant commandant at the field artillery school at Fort Sill, Oklahoma, and remained in his possession until his death in 1969 while on active duty as the commander of the U.S. Southern European Task Force stationed in Italy, at which time it passed to his family and remained in their possession until being offered now. The 1965 issue date of this pistol is also listed on p. 68 of "The Colt U.S. General Officers' Pistol" by Horace Greeley IV. The left side of the slide has the standard two-line address and patent dates followed by the Rampant Colt behind the serrations, while the right has the two-line caliber marking. The U.S. property marking is on the right of the frame and the serial number is on the left. It is fitted with blade and notch sights, as well as a pair of checkered walnut grips with Colt medallions. Includes an unmarked black leather general officer's pattern holster. Manufacturer: Colt Model: 1903 BBL: 3 3/4 inch round Gauge: 32 ACP Finish: parkerized Grips: walnut Serial Number567260 Class: Curio & Relic Handgun

Lot: 220 - WWII Nichols Knife with Sheath, Personalized to a U.S. Sailor

Highly Desirable and Exceptional World War II Floyd Nichols Fighting Knife with Sheath Personalized for a U.S. Sailor in the Pacific Theater 12 1/2 inches overall, with a 7 1/4 inch swept point blade, protective copper plating on the ricasso and the steel guard, a contoured and ribbed brass grip, and a mameluke style pommel with an "Indian head" nickel and the stamp "NICHOLS" on the bottom. The ribbing bears markings identifying it as made out of Anaconda 997 brand welding rod, and the guard is stamped "ELMER L. VANOUS. U.S. NAVY" on the left side. The included brown leather Alfred Cornish (Omaha, NE) sheath is also marked "***ELMER L. VANOUS***/**U.S. NAVY**". Records are limited, but period newspapers indicate an Elmer L. Vanous hailing from Davis City, Nebraska, (hometown of the knifemaker and artisan Floyd F. Nichols) was inducted into the U.S. Navy in 1943 shortly after his high school graduation and by mid-1945 a Yeoman stationed at Kwajalein in the Marshall Islands. His brother, John, went into the Army and was one of the American fatalities in the Battle of Iwo Jima. Returning to Davis City after the war, Elmer went into the gas industry and established a family, passing on c. 2005. While the exact history of the knife is unrecorded, many civilian makers got into the handmade knife game in World War II in response to a shortage of quality close combat weapons, Nichols among them, operating both on a mail order basis as well as directly selling to local boys and men heading off to the conflict. Vanous or his family likely bought the knife directly from Nichols. Manufacturer: None Model: None Class: Other

Lot: 221 - Pre-WWII 1939 U.S. Navy Shipped Colt M1911A1 Pistol with Letter

Very Scarce Pre-World War II 1939 Production U.S. Navy Shipped Colt Model 1911A1 Semi-Automatic Pistol with Factory Letter Manufactured in 1939, the included factory letter confirms this pistol's configuration, including the 5 inch barrel in .45 caliber, blue finish, and type of grips not listed, when included in a shipment of 1,088 pistols of the same type purchased by the U.S. Government and sent to the officer in charge of the U.S. Naval Supply Depot of the Naval Operating Base at Sewell's Point (Norfolk Navy Yard), Virginia, on December 18, 1939, with the letter noting that the shipment also contained 16 sets of spare parts and 2,176 magazines. Features fixed rounded blade front and squared notch rear sights, the two-line Colt patent dates and address in two block surrounding a Rampant Colt on the left of the slide, a "P" on top of the slide and "716/868" number under the firing pin stop, "COLT 45 AUTO" and "P" marked on the left of the barrel and lug, "P" and "H" on the left of the frame, the U.S. property marking along with the model designation and serial number on the right of the frame, "W" over a Colt triangle "VP" factory proof on the left of the trigger guard, and "69" on the right of the trigger guard. Fitted with a checkered milled trigger (with shadows of a once installed trigger shoe on the right), slide catch, wide spur hammer, thumb safety, and arched mainspring housing along with a pair of checkered walnut grips and a two-tone blued magazine marked "L" on the toe. Manufacturer: Colt Model: 1911A1 BBL: 5 inch round Gauge: 45 ACP Finish: blue Grips: walnut Serial Number716863 Class: Curio & Relic Handgun

Lot: 222 - WWII U.S. Naval Depot Shipped Colt Woodsman Match Target Pistol

World War II Norfolk Naval Depot Shipped U.S. Inspected Colt First Series Woodsman Match Target Model Semi-Automatic Pistol with Factory Letter Manufactured in 1941, the included factory letter confirms this pistol's configuration, including the 6 1/2 inch barrel in .22 caliber, blue finish, and type of grips not listed, when sold to the U.S. Government and included in a shipment of 525 pistols of the same type sent to the officer in charge at the U.S. Navy Supply Depot in Norfolk, Virginia, on September 14, 1943. Features pinned Patridge blade front and adjustable notch rear sights, a U.S. "ordnance wheel" stamp on the left of the frame, "G.H.D." inspector initials stamped on the right of the frame, along with standard Colt factory markings including the "MATCH/bullseye/TARGET" marking on the left of the barrel. Fitted with a pair of elongated checkered brown plastic grips with molded-in Rampant Colt medallions and a two-tone blued magazine marked "CAL .22 COLT" on the base. Manufacturer: Colt Model: Match Target Woodsman BBL: 6 1/2 inch slab side Gauge: 22 Long Rifle Finish: blue Grips: plastic Serial NumberMT13249 Class: Curio & Relic Handgun

Lot: 223 - M.G. Julien Hatcher's Smith & Wesson Highway Patrolman Revolver

Smith & Wesson Highway Patrolman (Pre-Model 28) Double Action Revolver Documented as Shipped to Major General Julian S. Hatcher with Factory Letter Manufactured in 1955, this is an excellent example of Smith & Wesson's .357 Highway Patrolman revolver, also known as the Pre-Model 28, that is documented as having been shipped to Major General Julian S. Hatcher (1888-1963), famed firearms expert and author of "Hatcher's Notebook" among many others. The included factory letter lists the revolver with a 4 inch barrel, brushed blue finish, and select checkered grips when shipped to Major General Julian S. Hatcher, National Rifle Association, Washington, D.C. on 14 November 1955. Hatcher graduated from the U.S. Naval Academy with honors in 1909 but quickly transferred out of the navy due to chronic sea sickness, being assigned to the coastal artillery in the U.S. Army. In 1916, he began his career as a weapons expert for the army when he was sent to solve operational issues with the M1909 Hotchkiss machine gun, discovering that the issue appeared to be improper training, and helped to establish the army's first machine gun school. In 1919, he was named the commanding officer of Springfield Armory and was instrumental in solving the issue of brittle receivers on the early production M1903 rifles, with part of the solution being a vent hole that became known as a "Hatcher hole". Prior to and during the early years of World War II, Hatcher was Chief of the Small Arms Division in the United States Army Ordnance Department and the Assistant Commandant of the Ordnance School, playing a pivotal role in trouble shooting and overcoming early production issues with the legendary M1 Garand, before retiring from the military in 1946. In 1947, two of Hatcher's most prominent books were published, those being "Hatcher's Notebook: A Standard Reference Book for Shooters, Gunsmiths, Ballisticians, Historians, Hunters, and Collectors" and "Hatcher's Book of the Garand", both of which remain highly regarded to this day. After retiring from the military he also served as the technical director of the National Rifle Association's magazine "American Rifleman", and he died in 1963. This revolver has the standard Smith & Wesson markings as well as the matching serial number on the butt, in the ejector rod shroud, the rear face of the cylinder, the front face of the ejector star, and stamped inside the right grip panel. It is fitted with a serrated ramped blade front sight, an adjustable notch rear sight, and a pair of checkered walnut magna grips with "S&W" monogram medallions. Manufacturer: Smith & Wesson Model: 357 Highway Patrolman BBL: 4 inch solid rib Gauge: 357 Magnum Finish: blue Grips: walnut Serial NumberS126528 Class: Curio & Relic Handgun

Lot: 224 - U.S. Springfield M1 Garand Rifle with Experimental Plastic Stock

U.S. Springfield Armory M1 Garand Semi-Automatic Rifle with Rare Experimental Fiberglass Reinforced Plastic Stock The serial number dates to November 1942, with an "S-A-1-47" marked barrel. This M1 Garand is wearing a rare experimental lightweight fiberglass reinforced plastic stock. Victory Plastic Company produced 100 of these fiberglass reinforced plastic stocks in 1954 for U.S. military

Lot: 225 - Rare World War II U.S. Ithaca Model 37 Trench Shotgun

Rare and Highly Desirable World War II U.S. Ithaca Model 37 Slide Action Trench Shotgun Only 1,422 Ithaca Model 37 trench shotguns were manufactured c. 1942 on U.S. contract during World War II per page 132 of "Complete Guide to United States Military Combat Shotguns" by Bruce Canfield. Although the aforementioned book specifies a serial range slightly above this example it appears to be an original trench shotgun. This is a solid representative of one of the rarest of the various World War II trench shotguns that were made for the U.S. military. A later contract for Ithaca Model 37 trench shotguns was given during Vietnam, typically seen with a different finish. This World War II example features a commercial type high polish blue finish, a flaming bomb proof stamp on the left side of the receiver followed by the Ordnance inspector initials "R.L.B" of Col. Roy L. Bowlin, head of the Rochester Ordnance District, and "U.S", the short six-hole sheet metal handguard, and a single brass bead sight on the bayonet adapter. The matching serial number "51010" is marked on the right front surface of the frame and lower right breech area of the barrel, and non-matching "51030" is stamped on the concealed front surface of the correct buttstock. The barrel has the 12 gauge 2 3/4 inch chamber markings, and the choke measures cylinder. It has a checkered oil finished walnut stock correctly with no cartouches and a checkered pump handle. Length of pull measures at 14 inches. Fitted with an olive drab green canvas web sling. Manufacturer: Ithaca Gun Co Model: 37 BBL: 20 inch round Stock: walnut Gauge: 12 Finish: blue Serial Number51010 Class: Curio & Relic Long Gun

Lot: 226 - WWII U.S. Inland Mfg. Div. M1A1 Paratrooper Carbine

World War II U.S. Inland Mfg. Div. M1A1 Semi-Automatic Paratrooper Carbine Manufactured in 1943, from the first production block (serial number range 101 to 999,000) manufactured by the Inland Manufacturing Division of General Motors from May 1942 to December 1943, and also within the known serial number range (approximately 65,000 to 4,950,000) of the first production run of M1A1 paratrooper carbines, totaling roughly 70,000 manufactured from late October 1942 to December 1943. Features winged blade front and "S" marked dual flip peep rear sights, a "7-43" dated Inland barrel, un-marked type 1 barrel band, "S'G'" marked type 2 operating rod, "S'G'" blued flat top bolt, along with an Inland milled trigger housing with a "EI" type 3 magazine catch, type 3 push-button safety, "HI" type 2 dog-leg hammer, and "RI" marked sear. Fitted with an "I-WB" marked two-rivet walnut handguard and a first series high-wood walnut paratrooper stock, marked "IO" on the interior under the grip with a folding wire stock and steel riveted leather cheek rest. Includes a web sling and metal oiler. Magazine absent. Note: This item is restricted under various state-level assault weapons bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MA, MD, NJ, NY, RI, VA, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Inland Model: M1 Carbine BBL: 18 inch round Stock: metal/hardwood Gauge: 30 Carbine Finish: parkerized/blue Serial Number595813 Class: Curio & Relic Long Gun

Lot: 227 - Rare WWII Experimental Stainless Barrel Winchester M1 Carbine

Rare Well-Documented World War II Experimental Stainless Steel Barrel Presentation Grade Winchester M1 Semi-Automatic Carbine, Formerly of the Winchester Factory Collection This is a very rare example of a World War II July 1945 production Winchester M1 Carbine factory equipped with an experimental stainless steel barrel. It appears to have been either a production sample or presentation piece intended for an important individual. The stock is beautiful factory presentation grade highly figured deluxe walnut and has no U.S. government acceptance stamps as it was retained by the factory. This exact M1 Carbine is pictured on page 1128 of the book "War Baby III: The U.S. Carbine Into the 21st Century" by Larry L. Ruth and is listed by its serial number 7278631 on page 1127 as one of six known stainless steel barrel M1 carbines, with the other examples listed being serial numbers 7239045, 7263334, 7266921, 7271074, and 7273010. This group of six stainless barreled examples were retained by the Winchester factory in their collection and later sold in the mid-1970s. An accompanying copy of a Winchester shipping release document dated July 7, 1975, lists this M1 Carbine by its serial number along with the five other mentioned M1 carbines and two M1 Garand rifles, and has a September 8, 1977, dated notarized statement at the bottom confirming it to be a true document. These experimental stainless steel barrels were developed to prevent corrosion from firing and extended periods of use in the field without cleaning. Winchester experimented with stainless steel barrels previously on some of their firearms, but found that although the material was resistant to corrosion it was harder to machine and was not ideal for wartime expedient production in the M1 Carbines. The carbine has the proper late production Winchester parts and features including the stainless steel barrel marked "W" on the bottom of the breech area, "W" trigger housing, "W" hammer, "W" magazine catch, "W" operating rod, "W" blued round bolt, "W" type III barrel band/bayonet lug assembly, "W" four-rivet handguard, "W" stock, and "W" recoil plate. It is fitted with a "BW" marked blued magazine, a period canvas web sling, an "SW" oiler. Includes a completed Carbine Club data sheet and a certificate of authenticity verifying it was once a part of the personal collection of noted author Larry L. Ruth. Note: This item features a high-capacity magazine which has a capacity above 10 rounds and is considered an assault weapon in some states. It cannot be sold or transferred to individuals in CA, CT, DC, DE, IL, MD, MA, NJ, NY, RI, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Winchester Model: M1 Carbine BBL: 18 inch round Stock: highly figured walnut Gauge: 30 Carbine Finish: parkerized/blue/bright Serial Number7278631 Class: Curio & Relic Long Gun

Lot: 228 - World War I U.S. Colt Model 1911 Semi-Automatic Pistol

World War I U.S. Colt Model 1911 Semi-Automatic Pistol with Factory Letter Manufactured in early 1918, well before the end of World War I, this is a fine example of a World War I U.S. Colt Model 1911 pistol. The included factory letter confirms the current configuration, grips not listed, as well as being part of a 500 gun shipment to Springfield Armory on 29 April 1918. The left side of the slide has the standard two-line, two-block patent dates and address separated by the Rampant Colt, while the right side has the standard "MODEL OF 1911.U.S. ARMY" nomenclature. The U.S. property marking is on the left of the frame along with the "JMG" inspector's mark, and the serial number is on the right. The blued barrel is marked with "P/H" on the chamber hood. It is fitted with blade and flat top notch sights, checkered slide release, thumb safety, and wide hammer, short grip safety, long smooth trigger, a pair of diamond pattern checkered grips, and an unmarked magazine with pinned base. Manufacturer: Colt Model: 1911 BBL: 5 inch round Gauge: 45 ACP Finish: blue Grips: walnut Serial Number282192 Class: Curio & Relic Handgun

Lot: 229 - WWII Era Unnumbered Production Sample Ithaca Model 1911A1 Pistol

World War II Era Un-numbered "Production Sample" Ithaca Gun Co. Model 1911A1 Semi-Automatic Pistol Manufactured c. 1943-1945 by the Ithaca Gun Company, based off of the shape and spacing of the distinct die marks on the right of the frame which are consistent with those from World War II era Ithaca production, this pistol lacks a serial number or any inspection and proof stamps. Multiple theories have been suggested for the existence of such pistols, including "lunch box guns" built from reject/overflow parts smuggled out of the factory one piece at a time by employees, "sample/tool room guns" made to serve as in house training and calibration references, and spare handguns kept on hand to be quickly swapped in if a numbered pistol was rejected by the inspector. Many samples and spares are also known to have been given as gifts to employees and company supporters once production wound down at the end of World War II and they were no longer needed for their original purpose. Features fixed serrated blade front and squared notch rear sights on top of the Ithaca marked slide, a blued barrel marked "P" and "HS" (High Standard), along with the U.S. property mark, model designation, and a "No" ("o" underlined) without a serial number on the right of the frame. Fitted with a short stamped and checkered trigger, a serrated slide catch, checkered narrow-spur hammer, serrated thumb safety, serrated arched mainspring housing with lanyard loop, a pair of checkered brown plastic "star/K" marked Keyes Fibre Co. grips, and a full-blued magazine marked "R" on top and "C-R" under the toe. Manufacturer: Ithaca Gun Co Model: 1911A1 BBL: 5 inch round Gauge: 45 ACP Finish: parkerized/blue Grips: plastic Serial NumberNSN Class: Curio & Relic Handgun

Lot: 230 - WWII 1945 Production U.S. Remington-Rand Model 1911A1 Pistol

Excellent World War II 1945 Production U.S. Remington-Rand Model 1911A1 Semi-Automatic Pistol with Box Manufactured in 1945, the last year of U.S. Model 1911A1 pistol production at Remington-Rand Inc., reportedly ending at serial number 2,465,139. Features fixed blade front and notch rear sights, a correct blued barrel marked with "P" and "F" (Flannery) on the recoil lug, the correct third type two-line "REMINGTON RAND INC./SYRACUSE, N.Y. U.S.A." address marked on the left of the slide with a "P" proof on top, "FJA" (Frank J. Atwood) inspector's initials and "P" marked on the left of the frame, the U.S. property marking and model designation along with the serial number on the right of the frame, "0" marked on the left of the trigger guard, and "U" on the right of the trigger guard. Fitted with a checkered short-stamped trigger, magazine release, thumb safety, and narrow-spur hammer, along with serrated slide catch and arched mainspring housing, a pair of Keyes Fibre Co. checkered brown plastic grips marked "star/K" on the interiors, and a full-blued magazine marked "S" on the toe. Includes an original un-numbered Remington Rand Inc. marked Kraft pattern box. Manufacturer: Remington-Rand Model: 1911A1 BBL: 5 inch round Gauge: 45 ACP Finish: parkerized/blue Grips: plastic Serial Number2445689 Class: Curio & Relic Handgun

Lot: 231 - U.S. Colt Transitional Model 1911/1911A1 Semi-Automatic Pistol

Scarce and Desirable U.S. Colt Transitional Model 1911/1911A1 Semi-Automatic Pistol Manufactured in 1924, this is a highly desirable example of a Colt Transitional Model 1911/1911A1 pistol. Starting in September of 1920, the Ordnance Board began to make suggestions for modifications to the Model 1911 pistol based on experience from World War I, and by April of 1923 OCM Item 2890 was standardized and recommended by the department. A pilot series of 10,000 pistols was approved with some production issues arising throughout 1923, but by January 1924 the first "Improved Models" were being delivered and were also known as the Transitional Model 1911s. While they retained the nomenclature markings of the 1911, they were equipped with the signature features of the 1911A1 which included the dished frame sides, shortened trigger, elongated grip safety, and arched mainspring housing. The left of the slide is marked with the two-line, two-block patent dates and address separated by the Rampant Colt, while the right has the "MODEL OF 1911. U.S. ARMY" marking. The right side of the slide is also faintly scratched with "DM/5-8-81/12:52 PM". The right of the frame has the U.S. property marking over the serial number while the left has the circled "WTG" monogram of Walter T. Gordon. The right of the trigger guard is marked "51". The blued barrel is marked with a conjoined "HP" on the chamber hood. It is fitted with a checkered slide stop and thumb safety, short checkered trigger (faint marks on the right from a trigger shoe having once been installed), arched checkered mainspring housing with lanyard loop at the base, blade front and flat top notch rear sights, an unmarked two-tone magazine, and a pair of correct fully checkered walnut grips. Manufacturer: Colt Model: 1911 BBL: 5 inch round Gauge: 45 ACP Finish: blue Grips: walnut Serial Number708560 Class: Curio & Relic Handgun

Lot: 232 - General Rattan's U.S. Colt Model 1903 General Officer's Pistol

Historic U.S. Colt Model 1903 Pocket Hammerless General Officer's Semi-Automatic Pistol Identified to Major General Donald V. Rattan with Holster Rig, Documents, Photographs, Book, and Factory Letter Manufactured in 1944, this is an exceptionally fine example of the U.S. Colt Model 1903 Pocket Hammerless General Officer's pistol that is identified as issued to General Donald V. Rattan (1924-2017),

Lot: 233 - Colt Government Pistol with "U.S. Army Air-Service" Inscription

Historic, Documented Pre-World War II Colt Government Model Semi-Automatic Pistol with U.S. Army Air-Service Inscription and Factory Letter This is an excellent example of an inscribed, pre-World War II Colt Government Model semi-automatic pistol. The included factory letter confirms the serial number, caliber, barrel length, factory inscription on the slide and finish with the type of stocks not

Lot: 234 - World War I Era Aircraft Propeller and Attributed Skin Swatch

Large World War I Era Aircraft Propeller and a Framed Skin Swatch Attributed to the Douglas World Cruiser #2 "Chicago" 1) Two-blade propeller, laminated hardwood construction, measuring approximately 99 inches from tip to tip, with 7 1/2 inches across the blade and a thickness of 3 3/4 inches at the center, with brass reinforcement at the leading edges and a set of eight bolt holes. One blade bears a "U(anchor)S" mark over "MATTHEWS BROS MFG Co./N-11801/8'4" L.H./S.E. 5090". Originally a furniture maker, Matthews Brothers became a primary supplier of American military aircraft propellers during World War I, with the propeller business sold off to become Hamilton Aero Manufacturing in 1919. 2) Framed fabric skin swatch attributed to Douglas World Cruiser #2 "Chicago", one of four aircraft sent on the world's first airborne circumnavigation of the globe (and one of two to successfully complete the flight) in 1924. The swatch measures 2 inches square, with flaking black paint over tan canvas, set on a backing which features a picture of the World Cruisers and a brief summation of the Chicago's history. Manufacturer: None Model: None Class: Other

Lot: 235 - U.S. Army Test Trials Colt Model 1907 Military Pistol

Rare Documented U.S. Army Test Trials Colt Model 1907 Military Semi-Automatic Pistol Manufactured in late 1907 or early 1908, this is one of 207 Colt Model 1905 Military (Model 1907) pistols manufactured to fulfill the 1907 contract for the U.S. government for test trials pistols. These pistols represent a pivotal stepping stone in the development of the legendary Model 1911, being one of the

Lot: 236 - U.S. Navy Contract Colt Model 1911 Semi-Automatic Pistol

Highly Desirable First Year Production U.S. Navy Contract Colt Model 1911 Semi-Automatic Pistol Manufactured in 1912, the first full year of production for the U.S. Model 1911. A total of only 15,037 of these pistols were manufactured by Colt with the desirable U.S. Navy slide marking, all of which were delivered prior to April of 1915. After that, all Model 1911 pistols delivered to the navy would bear the standard U.S. Army nomenclature, of which there were approximately 578,473 manufactured, making this variation comparatively very scarce. This is a fine example of the U.S. Navy contract Colt Model 1911 that was shipped on 9 November 1912 to the Brooklyn Navy Yard according to p. 514 of "U.S. Military Automatic Pistols 1894-1920 by Meadows. It is finished in the military brushed blue finish that was adopted in April of 1912. The left side of the slide is marked with the standard two-line, two-block Colt address and patent dates with the circled Rampant Colt behind the serrations, while the right bears the desirable "MODEL OF 1911 U.S. NAVY" marking. The left side of the frame has the U.S. property marking and "WGP" circled monogram above the magazine release, while the serial number is on the right. The later production blued barrel is marked "P H" on the chamber hood and "5" on the bottom in front of the lug. It is fitted with blade front and rounded top notch rear sights, checkered slide catch, thumb safety, magazine catch, and wide hammer, long smooth trigger, smooth flat mainspring housing with lanyard loop, a pair of diamond pattern checkered walnut grips, and a two-tone magazine with pinned lanyard loop base. This specific pistol is listed not listed on p. 526 of "U.S. Military Automatic Pistols: 1894-1920" by Meadows, however, serial number 13423 just one digit ahead of this one is listed as having been issued to troop transport USS Chaumont (AP-5) on 7 March 1934, which later became the hospital ship USS Samaritan during World War II. Manufacturer: Colt Model: 1911 BBL: 5 inch round Gauge: 45 ACP Finish: blue Grips: walnut Serial Number13424 Class: Curio & Relic Handgun

Lot: 237 - Pre-WWII U.S. Springfield Armory M1903A1 National Match Rifle

Excellent Pre-World War II 1937 Production U.S. Springfield Armory Model 1903A1 National Match Bolt Action Rifle Manufactured in 1937, the third to last year of Model 1903 Rifle production at the U.S. Springfield Armory, with this specimen being a desirable Model 1903A1 National Match configured example. It features a fixed blade front and M1905 pattern folding ladder rear sights (polished graduation faces, no volley notch), a "*" star gauge stamp on the lower muzzle of the "SA/flaming bomb/3-37" marked barrel, "H" marked bayonet lug, polished guide rails on the receiver, and a polished bright "N.S." marked swept-handle bolt with a matching serial number electro-penciled on to of the body and a vent hole extractor. Fitted with a walnut handguard stamped with a drawing number on top and a "C" profile semi-pistol grip stock with coarse checkered buttplate, marked with "S" in the cut-off recess, a boxed "S.A./S.P.G." cartouche on the left of the wrist, circled "P" under the grip, along with a matching serial number and drawing number stamped under the butt. Includes a steel front sight cover and a "P.J.O'HARE" marked steel rear sight cover. Manufacturer: Springfield Armory U.S. Model: 1903 BBL: 24 inch round Stock: walnut Gauge: 30-06 Springfield Finish: parkerized/blue Serial Number1497992 Class: Curio & Relic Long Gun

Lot: 238 - WWII U.S. Remington Model 11 Semi-Automatic Riot Shotgun

Excellent World War II U.S. Remington Model 11 Semi-Automatic Riot Shotgun "AMM" March 1943 date code and small anchor proof stamp on the left breech area of the matching numbered barrel. It features the 20 inch riot barrel, single bead front sight, 2 3/4 inch chamber, choke marked cylinder, and "U.S." ahead of flaming bomb proofs on both the barrel and receiver, and the receiver also has the "MILITARY FINISH" marking. Matching serial numbers marked on the left of the receiver and bottom of the barrel beneath the forend. Fitted with a smooth forearm and pistol grip stock with an unevenly stamped crossed cannons cartouche and "FJA" (Frank J. Atwood) inspection initials on the left of the buttstock, and a Remington Bakelite serrated buttplate. 14 inch length of pull. Manufacturer: Remington Arms Inc Model: 11 BBL: 20 inch round Stock: walnut Gauge: 12 Finish: blue Serial Number483709 Class: Curio & Relic Long Gun

Lot: 239 - WWII U.S. Springfield Armory M1 Garand Semi-Automatic Rifle

World War II U.S. Springfield Armory M1 Garand Semi-Automatic Rifle Manufactured in February 1945 with a "1 S-A-2-45" marked barrel and a properly bright chamber ring. Features a winged blade front sight, T105 adjustable peep rear sight assembly, "8" marked U.S. Springfield Armory pattern narrow-base gas cylinder, chamfered gas cylinder lock, cross-slot gas plug, stamped lower band with staked solid retaining pin, relief cut "9 SA" operating rod, long fork follower rod, "-19SA/O-15" bolt, and "-14-SA" trigger housing with "-7 SA" hammer, "SA-11" safety, and stamped trigger guard. Boxed "S.A./G.A.W." inspection cartouche and crossed cannons acceptance stamp on the left of the wrist, with a circled serif "P" firing proof behind the trigger guard and smaller crossed cannons under the grip. Fitted with a modern Boyt M1907 leather sling. Manufacturer: Springfield Armory U.S. Model: M1 Garand BBL: 24 inch round Stock: walnut Gauge: 30-06 Springfield Finish: parkerized Serial Number3501439 Class: Curio & Relic Long Gun

Lot: 240 - WWII 1945 Production U.S. Inland Mfg. Div. M1 Carbine with Case

Exceptional World War II 1945 Production U.S. Inland Mfg. Div. M1 Semi-Automatic Carbine with Case Manufactured in early 1945, from the fifth production block (serial number range 6,629,884 to 7,234,883) by the Inland Manufacturing Division of General Motors between November 1944 to August 1945, which included M2 production. It features a "R" marked winged blade front sight and an "I.R.CO." stamped adjustable peep rear sight, a "SI" marked type 3 barrel band, a "2-45" dated Inland barrel, Inland "H" marked type 4 operating rod, "A.I" blued round top bolt, along with an Inland milled trigger housing with "SI" marked type 4 magazine catch, type 4 rotary safety, and "HI" marked type 3 hammer. Fitted with a "HI" marked four-rivet walnut handguards and a low-wood walnut stock marked "IO" in the sling cut and stamped with an "Ordnance wheel" on the right of the butt. Includes a web sling, oiler, "1944" dated web muzzle cover, and a "SHANE MFG. CO./1944" marked period web carry case. Note: This item features a high-capacity magazine which has a capacity above 10 rounds and is considered an assault weapon in some states. It cannot be sold or transferred to individuals in CA, CT, DC, DE, IL, MD, MA, NJ, NY, RI, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Inland Model: M1 Carbine BBL: 18 inch round Stock: walnut Gauge: 30 Carbine Finish: parkerized/blue Serial Number6889279 Class: Curio & Relic Long Gun

Lot: 241 - Documented Springfield Model 1903/1924 International Match Rifle

Extremely Rare Documented Springfield Model 1903/1924 International Match Rifle Per the information on page 116 of the book "The Springfield 1903 Rifle" by LTC William Brophy, this was one of 40 barreled actions submitted to Springfield for testing as Model 1924 International Match rifles. In contrast to earlier International Match guns, which were fully in-house production by Springfield, for the 1924 IM the Arsenal solicited barrels from outside firms, namely Winchester, Remington, and Pope. To equip the 5-man match team, all the actions were bench tested, and the top 15 hand-picked for assembly into single shot rifles. This rifle was #28 on the list, and would be assembled with a fine target stock and a conventional magazine, bolt and trigger. Griffin & Howe globe front sight and a 150 meter Lyman receiver peep sight, with a pair of scope mounting blocks on the heavyweight Remington barrel and the standard nomenclature on the receiver. The bolt is hand-numbered to match the receiver. The stock is constructed from fine hardwood, with grasping grooves on the target-style forearm, brown leather sling, checkered pistol grip with ebony cap, and a checkered steel buttplate. Manufacturer: Springfield Armory U.S. Model: 1903 BBL: 30 inch heavy round Stock: walnut Gauge: 30-06 Springfield Finish: blue Serial Number1257711 Class: Curio & Relic Long Gun

Lot: 242 - WWI Era U.S. Winchester Model 1917 Bolt Action Rifle

Excellent World War I Era U.S. Winchester Model 1917 Bolt Action Rifle Manufactured in early 1918. The U.S. Model 1917 was the service rifle most used by infantrymen of the American Expeditionary Force (AEF) throughout World War I, and continued to see use up through World War II and beyond as a surplus arm, making original unaltered examples with a high level of retained original finish a rarity today. Features a "W/flaming bomb/1-18" marked barrel, winged fixed blade front and elevation adjustable ladder peep rear sights, standard receiver markings, "flaming bomb" and two "eagle head" proofs on left receiver wall, a "flaming bomb", "NS", and "W" marked bolt, "W" marked cocking piece, and "W" marked bayonet lug. Fitted with a pair of walnut handguards and a finger grasping groove walnut stock marked with "W/64" on the nose and an "eagle head/516" proof stamped behind the trigger guard tang. Includes a reproduction M1907 leather sling. Manufacturer: Winchester Model: 1917 BBL: 26 inch round Stock: walnut Gauge: 30-06 Springfield Finish: blue Serial Number112940 Class: Curio & Relic Long Gun

Lot: 243 - B.G. Bunker's U.S. Colt Model 1908 Pocket Hammerless Pistol

U.S. Property Marked General Officer's Colt Model 1908 Pocket Hammerless Semi-Automatic Pistol Documented as Issued to Brigadier General Howard G. Bunker Manufactured in 1945, this is an excellent example of one of only 1,500 Colt Model 1908 Pocket Hammerless pistols that were issued as U.S. General Officer's pistols according to Brunner in "The Colt Pocket Hammerless Automatic Pistols". This example has the standard Colt markings, the U.S. property marking on the right of the frame, and the "M" prefix stamped in front of the serial number. It is fitted with a blade front sight, notch rear sight, and a pair of checkered walnut grips with Colt medallions. This particular pistol is listed on p. 163 of the previously mentioned book as having been issued to Brigadier General Howard Graham Bunker on 31 May 1950. Bunker graduated from West Point in 1928, initially assigned to the coastal artillery but quickly transitioning to aviation, completing that training in 1929. During the beginning of World War II Bunker was attached to the Army Air Corps' Experimental Engineer Section, and then served in the European Theater as the Chief of the Air Technical Section from February 1943 to February 1944. From then until February of 1945 he served as the Director of Technical Services in the headquarters of the Air Service Command of the United States Strategic Air Forces in Europe. After the war, he transitioned to being primarily involved with the U.S. nuclear program, being one of the two Air Force members of the Military Liaison Committee of the United States Atomic Energy Commission from 3 October 1951 to 29 October 1954 and then retiring in 1958. He died in 1994 and is buried at the Fort Sam Houston National Cemetery. Manufacturer: Colt Model: 1908 BBL: 3 3/4 inch round Gauge: 380 ACP Finish: blue Grips: walnut Serial NumberM137963 Class: Curio & Relic Handgun

Lot: 244 - World War II U.S. Guide Lamp FP-45 Liberator Single Shot Pistol

World War II U.S. General Motors Guide Lamp FP-45 Liberator Single Shot Pistol Conceived, developed, and manufactured in 1942, the "Flare Pistol, 45 Caliber" (FP-45) was intended to A) give the citizens of occupied nations a way to express their displeasure to the occupiers, B) not give the enemy anything worth salvaging, and C) be cheap. The Guide Lamp Division of General Motors was tapped to produce the firearm, a collection of sheet metal stampings and cast zinc components assembled around a smoothbore barrel. While inexperienced with arms production, Guide Lamp stepped up admirably and cranked out over a million of the deadly little contraptions in a matter of months. The pistol is devoid of markings, with three oiler holes on the left side, two on the right, and a hollow grip for ammunition storage. Manufacturer: Guide Lamp Model: Liberator BBL: 4 inch round Gauge: 45 ACP Finish: phosphate Grips: metal Serial NumberNSN Class: Curio & Relic Handgun

Lot: 245 - World War II U.S. Remington-Rand Model 1911A1 Pistol

World War II U.S. Remington-Rand Model 1911A1 Semi-Automatic Pistol with Shipping Box and Release Invoice Manufactured in 1945, the last year of U.S. Model 1911A1 pistol production at Remington-Rand, reportedly ending their manufacture at serial number 2,465,139. The left side of the slide is marked with the standard two-line Remington-Rand address, while the right is unmarked. The left of the frame has the "FJA" inspector marking and "P" proof. The right side of the frame has the standard U.S. property, serial number, and model markings. The blued barrel is marked "P" and "F" on the left and right of the lug. It has standard features, a pair of Keyes Fibre grips, and a full blue "S" marked magazine. Includes a U.S. government release invoice indicating that this pistol was released from the Red River Army Depot in Texarkana, Texas, as well as the shipping box from the time of its release. Manufacturer: Remington-Rand Model: 1911A1 BBL: 5 inch round Gauge: 45 ACP Finish: parkerized Grips: plastic Serial Number2403831 Class: Curio & Relic Handgun

Lot: 246 - Vollmer Miniature Browning Model 1919 Belt Fed Firearm with Case

Desirable and Rare Vollmer Mfg. Miniature Browning Model 1919 Belt Fed Semi-Automatic Rimfire Firearm, Serial Number "JMB001" with Case and Accessories Manufactured c. late 1980s-1990s as a finely detailed 1/2 scale semi-automatic only rimfire copy of the classic Browning designed U.S. Model 1919A4 .30 caliber air-cooled machine gun, apparently as the first example based off the serial number, with a straight blow-back action and chambered for the .22 Long Rifle cartridge. It features folding blade front and adjustable ladder notch rear sights, a perforated steel heat shield around the barrel, the ".22 LR" caliber designation marked just behind the front sight, a safety lever just above the grip and trigger marked "F" and "S", along with the Vollmer address, model designation, and "JMB001" serial number on the right side plate. Fitted to an appropriately scaled recreation of a M2 tripod along with a T&E mechanism. Includes a crate styled hardwood case fitted for the gun containing two scaled down metal ammunition cans, one cloth ammunition belt, and a ammunition can adapter plate for the gun. Note: This item is restricted under various state-level assault weapons bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MA, MD, NJ, NY, RI, VA, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Vollmer Mfg Model: 1919 BBL: 11 3/4 inch round Gauge: 22 Long Rifle Finish: parkerized/blue Grips: metal Serial NumberJMB001 Class: Modern Other Firearm

Lot: 247 - Cased Miniature Colt Thompson Model 1921 Submachine Gun

Cased Miniature Colt Thompson Model 1921 Submachine Gun Manufactured c. late 20th century to early 21st century as an approximately 1/2 scale, non-firing, miniature replica of the Colt Thompson submachine gun. It features a miniature Cutts compensator at the muzzle, blade front sight, folding ladder notch rear sight, hardwood grips and detachable buttstock. The left side of the upper has "MODEL of 1921" marked above "NO 100" next to the Thompson, caliber and Colt nomenclature, and the right side has the Auto-Ordnance Bridgeport address and patent date markings. Includes a hardwood case with green felt lined interior, and one miniature type "C" 100-round drum magazine matching serial numbered "100". Manufacturer: None Model: None BBL: 5 1/4 inch round Stock: hardwood Finish: blue Serial Number100 Class: Other

Lot: 248 - WWII Era Framed Print "The American Way" Norman Rockwell

World War II Era Framed Lithograph Print "The American Way" by Norman Rockwell "The American Way" was created by Norman Rockwell in 1944 during World War II. Norman Rockwell (1894-1978) is one of the utmost legendary American painters and illustrators who created over 4,000 original works in his lifetime; notably for the cover illustrations of everyday life he made for "The Saturday Evening Post" magazine for nearly five decades, his rendition of "Rosie the Riveter", and the "Four Freedoms" series. Offered here is a period lithograph print of "The American Way" portraying an American soldier feeding a spoonful from his field rations to a young girl seated on a block of stone, emphasizing the theme of compassion of servicemen during wartime. The soldier is wearing his full combat uniform and helmet, and his iconic Thompson Model 1928A1 submachine gun is laying down next to him. The image is surrounded by a patriotic themed border. It measures 24 3/4 inches by 30 3/4 inches including the frame. Manufacturer: None Model: None Class: Other

Lot: 249 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 250 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 251 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 252 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 253 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 254 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 255 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 256 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 257 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 258 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 259 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 260 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 261 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 262 - British Accuracy International AW50 Sniper Rifle with Case

Desirable British Accuracy International AW50 Bolt Action .50 BMG Sniper Rifle with Case and Accessories Manufactured c. 2009 per the "LP/09" proof on the barrel, with an import mark on the receiver. Based partly off of International Accuracy's earlier Arctic Warfare Magnum (AWM) design, the Arctic Warfare 50 (AW50) is scaled up to handle the potent .50 BMG cartridge, making it a precision sniper platform with the capabilities of an anti-material rifle, all within a one-man portable package. It features a large two port muzzle brake bolted onto the straight fluted heavy contour barrel marked with a nitro proof and ".50" on the right side of the chamber, a Picatinny rail running across the top of the receiver, a straight fluted multi-lug bolt with polymer handle knob, ambidextrous safety levers with color coded "S" and "F" position indicators, and the receiver mated to an aluminum chassis system. The chassis system itself features an integrated bipod mounting point on the tip of the free-floating forend, mounted with a detachable and adjustable folding metal bipod, green polymer panels, a side folding buttstock assembly, an adjustable cheek piece, butt, and spring loaded cantilever monopod assembly. Matching serial numbers on the receiver and bolt body. Includes a green iM3220 Storm hard case fitting for the rifle, containing an extra folding metal bipod of a differing design, a nylon sling, three extra magazines, and a nylon case containing cleaning supplies and some tools. Note: This item is restricted under various state-level assault weapons bans where 50 BMG caliber is prohibited including CA, CO, IL, NJ, and DC. Please check your local laws and regulations prior to bidding. Manufacturer: Accuracy International Model: Aw 50-Rifle BBL: 27 inch heavy fluted Stock: synthetic Gauge: 50 BMG Finish: black Serial Number13930 Class: Modern Long Gun

Lot: 263 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 264 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 265 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 266 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 267 - Desirable Smith Mfg. Group FG42 II S/A Rifle with Scope and Case

Desirable Smith Manufacturing Group FG42 II S/A Semi-Automatic Rifle with Scope and Case Manufactured in Decatur, Texas, c. early 21st century as a high quality modern semi-automatic version of the famous World War II era German Fallschirmjagergewehr 42 (FG 42) automatic paratrooper rifle, with this specific version patterned after the later production Type G (Type II) model. Features folding hooded post front and folding adjustable peep rear sights, removable compensator shroud threaded onto the muzzle, reversible spike bayonet, folding metal bipod, "S/F" marked fire controls, and simulated droop wing "eagle" proofs and "fzs" code on top of the receiver. Fitted with a birch handguard and laminate stock, along with a pair of checkered brown plastic pistol grip panels. Topped off with a reproduction "ddx." code ZF4 4x scope. Includes a black hard case and an extra magazine. Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Smith Manufacturing Model: FG42 II S/A BBL: 20 1/2 inch round Stock: laminate Gauge: 8x57mm Finish: blue/phosphate Serial Numberfzs0036 Class: Modern Long Gun

Lot: 268 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 269 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 270 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 271 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 272 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 273 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 274 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 275 - Rare World War II German Panzerkampfwagen IV Ausf. H Medium Tank

Rare and Immensely Desirable World War II German Panzerkampfwagen IV Ausf. H Medium Tank, Captured on the Eastern Front - One of Only Two Known in the United States This is hands down the rarest of surviving tanks one will encounter stateside today and we at Rock Island Auction Company are greatly honored to offer it. This World War II German Panzerkampfwagen (Armored Fighting Vehicle) IV Ausf. H

Lot: 276 - WWII German Diplomat Dagger Identified to Franz von Papen

Well-Documented World War II German Diplomatic Officer's Dagger, Sheath and Party Membership Book, Inscribed and Identified to Franz von Papen, Hitler's First (and Last) Vice-Chancellor, with Supporting Texts Designed by Joachim von Ribbentrop for issue to officers of the Foreign Office, the diplomats and administrators of the Office received very similar sidearms, distinguished by the head of the

Lot: 277 - Excellent WWII J.P. Sauer & Sohn M30 Luftwaffe Survival Drilling

Excellent World War II German J.P. Sauer & Sohn M30 Luftwaffe Survival Drilling with Case and Accessories Offered here is an excellent surviving example of a World War II German J.P. Sauer & Sohn M30 Drilling with its survival case. Manufactured by Sauer & Sohn c. 1941-1942 on contract for the Luftwaffe, the M30 Drillings are a commercial grade hunting weapon that could be stowed aboard bombers and other large aircraft intended for use as survival weapons for aircrews and are known to have been carried in North Africa and the Mediterranean Theater during World War II. They were considered to be the finest survival rifle ever issued by any military. The dual shotgun barrels and single rifle barrel gave the ability to address nearly any game animal that may be reasonably encountered. The barrels have a commercial grade blue finish, and a beautiful, vivid, case colored finish is on the receiver, trigger guard, forend attaching iron and grip cap. The receiver and trigger guard are decorated with impeccably executed scroll engraving. The Sauer & Sohn intertwined "SuS" monogram is engraved on the underside of the receiver. The legend "J.P. SAUER & SOHN SUHL" is roll-stamped on the breech of both shotgun barrels and on both sides of the receiver. Blued "KRUPP-LAUFSTAHL" barrels chambered in 12 gauge up top and 9.3x74R below in the rifled barrel, with a fixed bead sight at the front, a flip-up rear rifle sight controlled by the selector switch, light decorative band engraving at the rear, a prominent "Luftwaffe eagle" on the right chamber and a combination of commercial proof marks and a Luftwaffe "eagle/L2" on bottom at breech. The frame has three indicator pins, barrel selector and "S/K" selector markings on the upper tang, Greener-style safety on the left, and dual triggers with a single set front trigger. Fine checkering is present on the splinter forearm and pistol grip stock, the latter showing a lightly engraved casehardened grip cap, right handed cheek rest, a "Luftwaffe eagle" stamp on the right side, and a serrated buttplate with "SuS" monogram. The matching full serial number "339629" is marked on the bottom of barrel assembly, frame and lower tang, and matching partial "9629" is on the interior of the forearm. The drilling is complete with an original Luftwaffe aluminum gray painted survival case with the gun model nomenclature in black painted stencil letters on top of the lid, containing a period boxed three-section wooden cleaning rod, a brown leather sling, and cleaning brushes. Length of pull is 14 inches. Manufacturer: Sauer J P & Son Model: M30 Drilling BBL: 25 3/4 inch solid rib Stock: walnut Gauge: 12 Finish: blue/casehardened Serial Number339629 Class: Curio & Relic Long Gun

Lot: 278 - Artifacts from/Related to Luftwaffe Fighter Ace Horst Petzscler

Grouping of Artifacts from and Related to Luftwaffe Fighter Ace Horst Petzschler, Including a Luftwaffe Uniform Tunic and Presentation Sword Born in Berlin in 1921, Horst Petzscler took an early interest in aviation, training as a youth glider pilot and receiving an apprenticeship as a toolmaker with Henschel Flugzeugwerke A.G. once out of school. In 1941 he enlisted in the Luftwaffe, receiving

Lot: 279 - WWII Luftwaffe Contract "1942" Date Krieghoff P.08 Luger Pistol

Excellent World War II German Luftwaffe Contract "1942" Date Krieghoff P.08 Luger Semi-Automatic Pistol with Luftwaffe Proofed Holster and Certificate Manufactured in 1942, one of an estimated total of just 300 Luger pistols manufactured for the Luftwaffe that year by Krieghoff as shown in the table on page 261 of "Third Reich Lugers" by Jan Still. They are noted in two general serial number ranges of 11,100-11,300 and 11,500-12,000. The only official supplier of Luger pistols for the Luftwaffe, Heinrich Krieghoff Gun Co. produced examples display a much finer fit and finish than other German military contract Lugers of the era, with blue and straw colors more in line with commercial production and rating among the finest examples of the Luger pistol ever produced. Given the relatively low production total and the high attrition rate throughout the rest of World War II, high condition original examples of these 1942 production Krieghoff Lugers are very scarce, especially in as high of a condition as this excellent example. It has fixed serrated blade front and toggle notch rear sights, the "1942" date marked on top of the barrel extension, "H(anchor)K/KRIEGHOFF/SUHL" marked on top of the toggle link, along with droop wing "eagle/2" and "eagle" proofs. Matching full serial numbers on the frame, barrel, and extension, along with visible matching "95" partial serial numbers on the takedown lever, side plate, trigger, safety bar, toggle links, toggle pin, breech block, extractor, and striker. Fitted with a pair of checkered black plastic grips and a "122" code and "eagle/37" proofed blued magazine with a droop wing "eagle/2" proofed and "11893" (just two digits off the pistol) serial number on the alloy base. Includes a droop wing "eagle/2" Luftwaffe proofed dark leather flap holster, and an extra "122" code and "eagle/37" proofed blued magazine with an un-numbered droop wing "eagle/2" proofed base. Manufacturer: Krieghoff Heinrich Gun Co Model: P.08 BBL: 4 inch round Gauge: 9mm Luger Finish: blue/straw Grips: plastic Serial Number11895 Class: Curio & Relic Handgun

Lot: 280 - Desirable WWII J.P. Sauer & Sohn M30 Luftwaffe Survival Drilling

Desirable World War II German J.P. Sauer & Sohn M30 Luftwaffe Survival Drilling Manufactured by Sauer & Sohn c. 1941-1942 on contract for the Luftwaffe, the M30 Drilling was a commercial grade hunting weapon that could be stowed aboard bombers and other large aircraft in a specially prepared case and used to forage local game if the crew had to wait a long time for rescue after "ditching" on land. At least in theory, the dual shotgun barrels and single rifle barrel gave the ability to address nearly any game animal that may be reasonably encountered, from small birds up to large herbivores, and anecdotal reports from the time indicate that they were regulation equipment for bombers operating over North Africa. Blued "KRUPP-LAUFSTAHL" barrels chambered in 12 gauge up top and 9.3x74R below in the rifled barrel, with a fixed bead sight at the front, a flip-up rear rifle sight controlled by the selector switch, light decorative band engraving at the rear, a prominent "Luftwaffe eagle" on the right chamber and a combination of commercial proof marks and a Luftwaffe "eagle/L2" on bottom at breech. Light scrollwork is present on the casehardened frame, with three indicator pins, barrel selector and "S/K" selector markings on the upper tang, Greener-style safety on the left, and dual triggers with a single set front trigger. Fine checkering is present on the splinter forearm and pistol grip stock, the latter showing a lightly engraved casehardened grip cap, right handed cheek rest, a "Luftwaffe eagle" stamp on the right side, and a serrated buttplate with "SuS" monogram. Length of pull is 14 inches. Manufacturer: Sauer J P & Son Model: M30 Drilling BBL: 25 1/2 inch solid rib Stock: walnut Gauge: 12 Finish: blue/casehardened Serial Number334704 Class: Curio & Relic Long Gun

Lot: 281 - World War II Walther "ac/45" K43 Sniper Rifle with ZF4 Scope

Late World War II German Walther "ac/45" Code K43 Semi-Automatic Sniper Rifle with ZF4 Scope Offered here is an exceptional example of a 1945 production K43 rifle manufactured by Walther on a rough forged receiver with "K.43" model designation and "ac/45" manufacturer code and date markings on the left (partly concealed by the wood line). The right side mounting rail is fitted with a ZF4 scope. The left of the scope body is marked "Gw ZF 4 Bu/44130/ddx." next to a triangle. The scope mount base is numbered "3569" along with an "eagle/359" proof. Standard hooded blade front sight and tangent rear sight graduated from 1-12. Both the receiver and bolt carrier are forged and machined. The bolt carrier has a hollow cocking knob and correctly has no provision for a catch on the right side. Smooth pistol grip laminated stock with a cupped trapdoor buttplate and compartment. Matching visible serial numbers marked on the receiver, bolt carrier, and bolt. Waffenamt stamps on various components including the magazine and stock. "aye" code "G43" marked magazine. Includes scope lens covers. Manufacturer: Walther Model: K43 BBL: 22 inch round Stock: laminate Gauge: 8x57mm Finish: blue/phosphate Serial Number3930d Class: Curio & Relic Long Gun

Lot: 282 - Cased Factory Presentation Engraved Krieghoff P.08 Luger Pistol

Incredibly Rare and Extraordinary Well-Documented Factory Presentation Engraved and Platinum Plated Krieghoff P.08 Luger Semi-Automatic Pistol with Relief Carved Ivory Grips, Presentation Case and Two Matching Magazines Rock Island Auction Company is honored to have the privilege to offer this extraordinary factory presentation engraved and platinum plated Krieghoff P.08 Luger pistol. Manufactured

Lot: 283 - 1944 Black Wound Badge Issued to Vice Admiral Hans-Erich Voss

The Highly Scarce Black Wound Badge of 20 July 1944, as Issued to Vice Admiral Hans-Erich Voss Established following the 20 July Plot, in which a bomb planted by Claus von Stauffenberg detonated in the conference room of the Rasterburg Headquarters, the 20 July Wound Badge was only issued to the men who were present for the blast. In keeping with the arrangement of the standard badge, the 20 July badge was issued in black, silver and gold, based on the number and severity of wounds, and could be later upgraded for injuries suffered in the future; in the case of Admiral Voss, at the time of the bombing he qualified for the black badge, and before war's end had earned the gold, making him the only one to receive all three of these scarce badges. Graduating the Naval Academy in 1917, Voss served through the Weimar-era and into the German military, eventually being promoted from command of the heavy cruiser Prinz Eugen to the Naval Liaison Officer to Hitler's headquarters in 1943. It was this appointment that placed him in the room with the bomb, which inflicted minor wounds. Voss was among the officers present in the Berlin Fuhrerbunker during the final days of the war, and was captured by the Soviets during the escape attempt. Held as a prisoner of war, he was sentenced to 25 years imprisonment, but was released to the German Democratic Republic in 1954. Silver construction, with the wreath, swords and helmet darkened and the background left bright, with "20.JULI/1944" and Hitler's signature below the helmet, and the rear of the badge marked "800/2" under the clasp. Included with the badge is a leather lined case. With a letter from William O. Stump of Stump Armament dated 2 July 1969, who attests that he acquired this item and verified it's authenticity via correspondence from Admiral Voss himself. Manufacturer: None Model: None Class: Other

Lot: 284 - WWII German Mauser K98k High Turret Sniper Rifle with Scope

World War II German Mauser K98k High Turret Bolt Action Sniper Rifle with Scope Manufactured c. 1940-1945. This is a solid example of a genuine World War II German high turret sniper rifle that was manufactured by the Mauser factory and fitted with an original Kahles 4x90 sniper scope with matching numbered ring assembly. Deployed relatively early in World War II, while on paper the High Turret Sniper was rendered obsolete by the easier to make Long Rail and Short Rail Snipers, the High Turret Sniper was a robust and effective sharpshooting platform that never fully left military service during World War II. Hooded blade front and tangent rear sights, with a set of turret mounts installed on the "eagle/135" and "Mod.98" marked Mauser receiver. The matching numbered bolt has been fitted with a renumbered to match trimmed down safety switch and cocking piece, with a "cad" marked Kahles 4x scope numbered “44566” on the left of the dial, with a renumbered to match front ring marked "5903c" and the rear mount marked with an "eagle/135" proof. Stamped barrel bands, "byf" code trigger guard and floorplate, with a laminated stock with matching numbered handguard, cupped bright steel buttplate, and a brown leather sling. Manufacturer: Mauser Model: 98 BBL: 24 inch round Stock: laminate Gauge: 7.92 mm Mauser Finish: blue Serial Number5903c Class: Curio & Relic Long Gun

Lot: 285 - Scarce WWII German Mauser G41(M) Semi-Automatic Gas Trap Rifle

Scarce World War II German Mauser Model G41(M) Semi-Automatic Gas Trap Rifle Manufactured in 1942 on orders from the German Weapons Office, the G41(M) uses the "Bang" pattern gas trap seen on other early German semi-automatics, in combination with a rotating bolt installed in a bolt carrier and equipped with a bolt action style charging handle. On the first shot the bolt would be used to chamber a round and cock the striker, with the follow-up shots being gas-operated semi-automatic, with the option to revert to the bolt in event of a gas system failure. While having some advantages, the gas trap fell to the wayside as port-based systems became the nigh-universal standard for gas operated firearms, leaving production of the G41(M) extremely limited. Hooded blade front and tangent rear sights, with the distinctive gas trap at the muzzle, "G.41(M)/1942" on the receiver ring, and the two position safety switch on the hinged dust cover. Smooth hardwood stock, fitted with milled barrel bands and a cupped buttplate. Manufacturer: Mauser Model: G41 (m) BBL: 22 inch round Stock: hardwood Gauge: 8x57mm Finish: blue Serial Number5275 Class: Curio & Relic Long Gun

Lot: 286 - Rare WWII Japanese "North China" Type 19 Pistol with Holster

Very Rare World War II Japanese "North China" Type 19 Semi-Automatic Pistol with Holster Produced in very limited quantities at the tail end of the war, the "North China Type 19" was an attempt to make a streamlined substitute for the Type 14 Nambu pistol for Japan's occupation forces in China. There were a number of factors underpinning this decision; the occupation was in constant need of fresh weapons to deal with the Nationalist and Communist Chinese forces, resources from the Home Islands were tight due to the pressure applied by the Allied "island hopping" campaign, and any shipment of supplies was in danger from air or submarine attack. Chinese industry was used to arm auxiliary units, and using it to arm main-line troops was a logical next step. Believed to have been made in or around either Beijing or Shanghai, the Type 19 closely follows the basic mechanism and general shape/ergonomics of the Type 14, though with a number of changes. The safety has been relocated and redesigned, being a simple thumb lever towards the rear; in addition to being easier to make, this safety is easier to operate with the shooting hand, a complaint expressed in some quarters against the Type 14. The trigger guard is a solid, integral frame component, and does not need to be manipulated to disassemble the pistol, with a spring-retained lever on the front right serving to secure the upper assembly to the frame. The barrel and bolt assembly are very close to the Type 14, as is the magazine, though there is no provision for a magazine well safety or a retention spring. Quantities of this pistol on the American market are extremely limited; as they were made in China for use in China, few made it elsewhere in the Pacific Theater where a trophy-hunting GI would have the chance to claim one from a downed enemy or a cache of surrendered arms, versus the wave of Type 14s, 94s, 99s and swords that came home when demobilization began. Per Derby and Brown in "Japanese Military Cartridge Handguns 1893-1945" (page 264) total production of the Type 19 is estimated at less than 200, with only twenty recorded in the survey on the same page. Blade and notch sights, with no external numbering or nomenclature, "01" markings on concealed areas of the receiver and frame. The grips are ribbed hardwood. Included with the pistol is a Chinese-style brown leather flap holster with a five-pointed star stitched into the flap and a leather shoulder strap. Manufacturer: North China Industries Model: Type 19 BBL: 4 1/2 inch round Gauge: 8mm Nambu Finish: blue Grips: hardwood Serial NumberNSN Class: Curio & Relic Handgun

Lot: 287 - Tokyo Gas & Electric Baby Nambu Pistol with Matching Magazine

Very Scarce and Desirable Tokyo Gas & Electric Company Baby Nambu Semi-Automatic Pistol with Matching Magazine and Holster The semi-official officer's pistol of the Imperial Japanese Military, the Baby Nambu was intended as a "home grown" option for Japanese military officers privately purchasing a sidearm. Approximately 550 Baby Nambu pistols were manufactured by the Tokyo Gas & Electric Company for sale through the officer's union system; this Baby Nambu does not appear among the recorded serial numbers in Appendix H of Japanese Military Cartridge Handguns 1893-1945 by Derby and Brown. Fixed sights, with the "GTE" logo on top of the chamber, the 3-symbol Nambu nomenclature and serial number on the right side of the frame, checkered hardwood grips and straw finished small parts. Matching numbers are present on multiple parts, including the left grip panel (right unnumbered) and the nickel finished magazine. Also included is a brown leather flap holster. Manufacturer: Japanese Model: Baby Nambu BBL: 3 1/4 inch round Gauge: 7mm Nambu Finish: blue Grips: hardwood Serial Number6071 Class: Curio & Relic Handgun

Lot: 288 - WWII Japanese Nagoya Type 99 Arisaka Sniper Rifle with 4x Scope

Exceptional World War II Japanese Nagoya Arsenal Type 99 Arisaka Bolt Action Sniper Rifle with 4x Scope and Scope Case Manufactured 1943-1945. Blade front and folding ladder rear sights, the latter equipped with A-A wings. The receiver has an untouched mum on the front ring, with the arsenal and serial number markings properly offset to the rear bridge and the left side cut, drilled and tapped for the scope base. A 4x scope, numbered "12232" on top and "1870" on the locking block with Takatiho markings, is included. Matching numbers are present on the bayonet lug, turned bolt handle, extractor, safety knob, and firing pin. The rifle is fitted with a smooth hardwood stock with a set of proof stamps on the stock belly, quick detach style canvas sling, and a cupped steel buttplate. Also included with the lot is a brown painted treated early variation canvas scope case with rounded lid edges and quick-release shoulder strap. Manufacturer: Japanese Model: Type 99 BBL: 26 inch round Stock: hardwood Gauge: 7.7mm Japanese Finish: blue Serial Number1774 Class: Curio & Relic Long Gun

Lot: 289 - Japanese Tokyo Arsenal Model 1902 Grandpa Nambu Pistol

Documented Japanese Tokyo Arsenal Model 1902 Grandpa Nambu Semi-Automatic Pistol Manufactured c. 1903-1906. Forerunner of the Type 14 Nambu that would be the standard Japanese sidearm of World War Two, the Grandpa Nambu was produced in relatively limited quantities before the Papa Nambu was introduced, with only around 2,400 made by Tokyo Arsenal. The serial number of this Grandpa Nambu is among those recorded in Appendix F of "Japanese Military Cartridge Handguns 1893-1945" by Derby and Brown. Blade front and tangent rear sights, with the "stacked cannonball" Tokyo mark on the chamber, and 3-symbol nomenclature on the right side over the serial number. The correct pattern fixed lanyard staple and slotted backstrap are present and unaltered. Matching numbers on complete barrel extension assembly to include locking block and firing pin. Fitted with a set of matching numbered checkered grips and a mismatched numbered nickel finished magazine with checkered wood base. Manufacturer: Japanese Model: Grand Papa Nambu BBL: 4 3/4 inch round Gauge: 8mm Nambu Finish: blue Grips: hardwood Serial Number2327 Class: Curio & Relic Handgun

Lot: 290 - Japanese Tokyo Arsenal Baby Nambu Pistol with Matching Magazine

Documented Japanese Tokyo Arsenal Baby Nambu Semi-Automatic Pistol with Matching Magazine Manufactured by the Tokyo Arsenal from 1909 to 1928, the Baby Nambu was the semi-official officer's pistol of the Imperial Japanese Military; officers would privately purchase their sidearms, with the Baby Nambu presented as the local alternative to imports from firms like Colt, FN and Walther. This particular Baby Nambu is among the serial numbers recorded in Appendix H of "Japanese Military Cartridge Handguns 1893-1945" by Derby and Brown. Fixed sights, with the "stacked cannonball" arsenal marking on top of the chamber and the nomenclature markings and serial number on the right side of the frame. Additional non-factory number "17" stamped on the right side of the barrel extension. Fitted with matching numbered checkered grips and a matching numbered nickel finished and alloy based magazine. Manufacturer: Japanese Model: Baby Nambu BBL: 3 1/4 inch round Gauge: 7mm Nambu Finish: blue Grips: hardwood Serial Number4685 Class: Curio & Relic Handgun

Lot: 291 - Gustav Bittner Model 1896 Manual Repeating Pistol Serial No. 49

Desirable Austrian Gustav Bittner Model 1896 Manual Repeating Pistol Serial Number 49 Manufactured between 1896-1898 in limited quantities. Originally patented in 1896 in Austria, Gustav Bittner's pistol is an excellent example of the "manual repeater" class of handgun. The rival to the single and double action revolvers of the early cartridge era, manual repeaters were brought to an end by the quick rise of innovative smokeless semi-automatic pistol designs around the same timeframe of this handgun's conception. Bittner's design uses a rotary locking bolt operated by a ring lever and a fixed bar lever for the trigger and feeds via an internal magazine loaded with en bloc clips. It has blade front and elevation adjustable notch rear sights, with "PATENT/BITTNER" above the Bittner trademark marked on the right of the frame. The frame is elegantly machined and high quality casehardened with distinctive colors, with a set of checkered walnut panels covering the magazine spring and a pair of checkered fine walnut contour grip panels. "923. 97." marked on the bottom of the barrel. Serial number "45" marked on the left of the grip frame, with "FS" stamped and "212" handwritten on the interiors of both grip panels. Manufacturer: Bittner Gustav Model: 1896 BBL: 6 inch octagon Gauge: 7.7mm Finish: blue/casehardened Grips: walnut Serial Number49 Class: Antique

Lot: 292 - Passler and Seidl 1887 Patent Repeating Pistol Serial No. 24

Rare Passler and Seidl 1887 Patent Manual Repeating Pistol Serial Number 24 Only less than 150 of these pistols were manufactured in the late 1880s based on foreign and American patents of 1887-1888, with differences noted between the limited surviving examples. This pistol design of Franz Passler of Vienna shows parallels to other manual repeaters of the day, using a ring trigger to cycle a round bolt, flicking the ring forward to retract the bolt and back to close it, with a bar trigger controlling a striker; in operation, the shooter could keep their trigger finger on the front edge of the ring trigger during the rearward pull to cock and chamber the weapon to be discharged at leisure like a single action weapon, or keep their finger inside the ring to fire automatically on bolt closure, emulating the speed of fire of a double action weapon. In contrast to it's contemporaries, the Passler design uses a straight bar integral to the ring trigger to operate the bolt, with feeding accomplished via a Mannlicher style en bloc clip, which feeds into the bottom of the short magazine well, secured by a spring catch in the frame with a spring loaded swing arm under the barrel lifting the cartridges. It has blade front and notch rear sights, with "WELT/PATENT/PASSLER & SEIDL/WEIN" on top of the frame, "GUSS-STAHL" on the left side of the chamber. The matching serial number "24" is marked on the left of the barrel, chamber area of the frame, follower arm, bolt assembly, trigger, grip frame, and interiors of both of the checkered walnut grips. Manufacturer: Passler & Seidl Model: Repeating BBL: 6 inch octagon Gauge: 7.7mm Finish: blue/straw Grips: walnut Serial Number24 Class: Antique

Lot: 293 - Gold Washed Mauser Baby Model 1878 "Zig-Zag" Revolver with Case

Gold Washed and Cased German Mauser Baby Model 1878 "Zig-Zag" Single Action Revolver Manufactured c. 1878-1896, the Baby Model "Zig-Zag" takes the hinge frame variation of the 1878 "Zig-Zag" and scales it down to a size more suitable for pocket carry and personal protection. It retains the distinctive "Zig-Zag" mechanical features including the namesake tracked cylinder, break action loading, and manual ejector; unorthodox by the standards of the day but well designed and effective. Blade and notch sights, with "GEBR. MAUSER & Cie OBERNDORF a/N. WURTTEMBERG. 1878." on top of the barrel rib, and the matching full and partial serial number marked on various components. The pins, screws and locking lever are niter blue finished, with the rest of the revolver finished in a fine gold wash, and a set of hard rubber grips with raised scroll and beast motifs. Included with the revolver is a black leatherette case, an extra spring, and a small oil/solvent jar. Manufacturer: Mauser Model: 1878 BBL: 3 5/8 inch round Gauge: 8mm Centerfire Finish: gold wash Grips: hard rubber Serial Number82 Class: Antique

Lot: 294 - Mauser Model 1878 "Zig-Zag" Single Action Revolver

Mauser Model 1878 "Zig-Zag" Single Action Revolver Manufactured c.1886-1896, the "Zig-Zag" revolver was the first handgun designed and developed by Paul Mauser and his firm, while still operating in partnership with Wilhelm Mauser as the Mauser Brothers (prior to 1884). A competitor to be the first centerfire cartridge-fed handgun adopted by the German military, the 1878 scored high marks in overall performance, though concerns about the complexity of the design led them to choose the 1879 Reichsrevolver instead. A number are believed to have seen service as privately purchased military sidearms. At the heart of the mechanism is the combination of an angular track (the titular "Zig-Zag") machined into the side of the cylinder and a toothed reciprocating bar linked to the hammer, which serves to both advance and lock the cylinder, in contrast to the more commonly seen pawl/sprocket and stop arrangement. Additionally, the spring responsible for resetting the cocking bar also powers the hammer, replacing the grip frame mounted leaf spring commonly seen in that era. For loading, the barrel assembly is hinged at the rear of the top strap, automatically pushing the hammer back to the safety notch when opened, with the closure latch doubling as the lever for a star-pattern extractor assembly. Sights are fixed, with "WAFFENFABRIK MAUSER & Cie OBERNDORF a/NECKAR" on top of the barrel rib, "crown/crown/U" on the left side of the barrel shroud, and matching partial serial number on multiple components. Includes a pair of finely decorated hard rubber grips with foliate borders and "mountain man" motifs. Manufacturer: Mauser Model: 1878 BBL: 5 1/2 inch solid rib Gauge: 10.6x25mmR Finish: blue Grips: hard rubber Serial Number2566 Class: Antique

Lot: 295 - Mauser "Baby" Model 1878 "Zig-Zag" Single Action Revolver

Mauser "Baby" Model 1878 "Zig-Zag" Single Action Revolver Manufactured c. 1886-1896, the Baby Model "Zig-Zag" takes the hinge frame variation of the 1878 "Zig-Zag" and scales it down to a size more suitable for pocket carry and personal protection. It retains the distinctive "Zig-Zag" mechanical features including the namesake tracked cylinder, break action loading, and manual ejector; unorthodox by the standards of the day but well designed and effective. Blade and notch sights, with "GEBR. MAUSER & Cie OBERNDORF a/N. WURTTEMBERG. 1878." on top of the barrel rib, and the matching full and partial serial number marked on various components. With a pair of checkered hardwood grips. Manufacturer: Mauser Model: 1878 BBL: 3 5/8 inch solid rib Gauge: 8mm Centerfire Finish: blue Grips: hardwood Serial Number260 Class: Antique

Lot: 296 - German DWM 1893 Borchardt Pistol with Shoulder Stock

German DWM Model 1893 Borchardt Semi-Automatic Pistol with Shoulder Stock This is a solid representative example of a Model 1893 Borchardt semi-automatic pistol manufactured by DWM between 1896-1898. The Model 1893 was designed Hugo Borchardt and was among the first viable semi-automatic pistol designs to hit the commercial market. It was also an important forerunner to the work of Georg Luger, who would refine the core mechanical principles of the Borchardt pistol to make his own eponymous and world famous handgun. It has fixed blade front and notch rear sights, unmarked chamber, "SYSTEM BORCHARDT. PATENT./DEUTSCHE WAFFEN-UND MUNITIONSFABRIKEN./BERLIN." on the right of the frame, and the patent marking "D.R.P./No75837" on the front toggle link. A series of "crown/letter" (B, U, and G) proofs are marked on the barrel, barrel extension and toggle assembly, with the "172,28" bore diameter on the left side of the barrel. It has a set of finely checkered hardwood grips. The matching visible serial number "2063" is marked on various components, and non-matching number "1761" is on the walnut base of the nickel finished magazine. Includes a wooden shoulder stock with cheek rest (absent release knob). Manufacturer: DWM Model: Borchardt BBL: 7 1/2 inch round Gauge: 7.65mm Borchardt Finish: blue/straw Grips: walnut Serial Number2063 Class: Antique

Lot: 297 - Excellent German Party Leader Walther PPK Pistol with Holster

Excellent German Party Leader Walther PPK Semi-Automatic Pistol with Party Leader Holster Manufactured in 1939. This is an excellent example of a Walther PPK "Party Leader" pistol with the desirable and rare Political Party Leader grip. These PPKs when fitted with the Party Leader grip were officially known as the "Honor Weapon of the Political Leaders", as they were only presented to high ranking officers of the NSDAP for meritorious service to the party. This series of Party Leader Walther PPK pistols are most often found in the approximate serial number range of 850000-935000 and again in the generally accepted 174000K-234965K serial number range. Although this example, serial number 242559K, is slightly higher than the noted serial number range it still appears to be an original Party Leader PPK, and there are a handful of other Party Leader gripped examples with serial numbers close on either side of this example that have previously been sold by Rock Island Auction Company, most notably serial number 247747K which was accompanied by a capture paper and also had its matching factory box. The one-piece wraparound grip has the distinctive large eagle clutching a swastika encircled by a wreath at the top on both sides. The pistol is a commercial model with the high polish Walther commercial blue finish and "crown/N" proofs stamped on the right of the slide below the ejection port, on the right of the barrel at the muzzle, and in the chamber area. 60 degree safety lever, cartridge indicator pin and lanyard loop on the bottom of the frame. The left side of the slide is marked with the Walther Banner followed by the factory legend and caliber in two lines and the designation "Mod. PPK." The serial number is marked vertically on the right side of the frame with the last three digits "559" correctly scratched inside the left of the slide. The pistol is fitted with one blued Walther banner marked magazine with finger extension. Includes an Albrecht Kind brown leather Party Leader holster with the eagle and swastika on the flap, and one extra blued Walther banner marked magazine with flat base. Manufacturer: Walther Model: PPK BBL: 3 1/4 inch round Gauge: 7.65 mm auto Finish: blue Grips: plastic Serial Number242559K Class: Curio & Relic Handgun

Lot: 298 - Rare German Walther PPK Factory Cutaway Semi-Automatic Pistol

Rare German Walther PPK Factory Cutaway Semi-Automatic Pistol Manufactured c. 1935-1945. A very small number of these cutaway pistols were manufactured by Walther for use by salesmen to demonstrate the features of the PPK pistol. The slide, frame, barrel, and right grip panel are all exquisitely milled away to reveal all internal components of the pistol. All milled edges are finished with same commercial blue finish as the rest of the pistol. The pistol is not serial numbered or proofed. The portions of the left side of the slide where the Walther legend is normally located are factory milled away for viewing. The blued magazine has the Walther Banner on the left side above the floor plate. Manufacturer: Walther Model: PPK BBL: 3 1/4 inch round Gauge: 7.65 mm auto Finish: blue Grips: plastic Serial NumberNSN Class: Curio & Relic Handgun

Lot: 299 - WWI German DWM 1917 Dated Model 1914 Artillery Luger

World War I German DWM 1917 Dated Model 1914 Artillery Luger Semi-Automatic Pistol with Matching Shoulder Stock and Holster Manufactured in 1917, with fine adjustable blade front and tangent rear sights, "1917" date on the chamber, "DWM" on the front toggle link, and appropriate military proofs on the barrel, receiver, and breechblock. Minus the nickel finished wood base magazine, the numbers are matching overall, including inside the grips and on the sight components. Blue finish overall, with straw finished small parts, checkered grips, and nickel finished magazine. Included with the pistol is a hardwood shoulder stock with matching number "6105" on the iron, a 1915 dated Hermann Flohr black leather holster, takedown tool, and a wood-handled barrel rod. Note: This item is restricted under various state-level assault weapons bans and cannot be sold or transferred to individuals in IL, CO, or NY. Please check your local laws and regulations prior to bidding. Manufacturer: DWM Model: Luger BBL: 8 inch round Gauge: 9mm Luger Finish: blue Grips: walnut Serial Number6105 Class: Curio & Relic Handgun

Lot: 300 - Excellent German DWM 1908 Commercial Luger Pistol with Holster

Excellent German DWM Model 1908 Commercial Luger Semi-Automatic Pistol with Holster One of approximately 9,000 manufactured for the commercial market prior to World War I c. 1908-1913, found in the approximate serial number range of 39000-71500 per page 116 of "Lugers at Random" by Charles Kenyon Jr. This pistol correctly has an unmarked chamber, the "DWM" monogram marked on top of the toggle link, no provisions for a hold open or stock lug, fixed blade front and notch rear sights, checkered toggles, a serrated thumb safety lever, wide trigger, and commercial crown proofs. Matching full commercial pattern serial numbers are present on the frame and barrel, along with matching partial serial numbers on various small parts including the barrel extension. The left grip has a "U" stamped on the interior and the right grip has a "2" and a "W". Includes a nickel finished magazine with correctly unmarked walnut base and an attractive brown leather holster stamped "AWM/16/12" on the front beneath the flap. Manufacturer: DWM Model: 1908 Commercial BBL: 4 inch round Gauge: 9mm Luger Finish: blue/straw Grips: walnut Serial Number52415 Class: Curio & Relic Handgun

Lot: 301 - Exceptional DWM 1900 "American Eagle" Commercial Luger Pistol

Exceptional DWM Model 1900 "American Eagle" Commercial Luger Semi-Automatic Pistol with Holster One of less than 12,000 manufactured c. 1900-1906. The Model 1900 was the first production Luger semi-automatic pistol offered by DWM to the international commercial market, with the "American Eagle" variants intended specifically for export to the lucrative United States market, found in the approximate serial number range of 2000-20000 per page 56 of "Lugers at Random" by Charles Kenyon Jr. Features the distinct American "Great Seal of the United States" eagle crest on top of the barrel extension, the "DWM" monogram marked on top of the toggle link, fixed blade front and notch rear sights, dished toggles with a toggle lock, narrow trigger, a checkered thumb safety lever, and a "GERMANY" export mark on front of the frame. Matching full commercial pattern serial numbers on the frame and barrel, along with matching partial serial numbers on various small parts including the barrel extension. The checkered walnut grips have the number "6" and a small asterisk stamped on both of the interiors. The nickel finished magazine has a correctly unmarked walnut base. Includes a period leather holster with "V.N.IT" handwritten on the interior of the flap. Manufacturer: DWM Model: 1900 Commercial BBL: 4 3/4 inch round Gauge: 7.65mm Luger Finish: blue/straw Grips: walnut Serial Number5657 Class: Curio & Relic Handgun

Lot: 302 - Prototype Mauser Model 1912 Delayed Blowback Pistol

Prototype Mauser Model 1912 Delayed Blowback Semi-Automatic Pistol Developed c.1910s, the Mauser Model 1912 was intended to take the base design of the Model 1910 and refine it to compete in the realm of other full powered military and defense handguns of the day such as the 9mm Luger and Colt's 45 ACP offerings. Most critically in this process would be replacing the straight blowback operation of the 1910 with a delay mechanism suitable for more powerful cartridges. In the early models, this took the form of the "Stuetzklappe", a ramped spring-loaded lever that interfaced with notches in the slide when the pistol was in battery to create a delayed blowback effect; on discharge, the slide would need to overcome the resistance produced by this lever before recoiling backwards, keeping the breech closed as initial discharge pressures fell to safe levels. As this lever produced a lot of friction against the slide, an external control built into the trigger guard allows the shooter to manually disengage the device, freeing up the slide for manual retraction. The earliest iterations of the stuetzklappe were externally mounted, but the transition was made to an internal one piece assembly (as seen on this item) during the prototype phase, and later to a two-piece mechanism on the production weapons. An unknown number of hand-made prototypes were made to test the internal lever, with examples pictured on pages 89 and 90 of "Mauser Pistolen" by Weaver, Speed and Schmid. While mechanically intriguing, the stuetzklappe device failed to gain traction, with Mauser internally moving on to other systems like flange blocks and rotating barrels, and the Browning-style tilting barrel short recoil mechanism taking its place in history as the de facto global standard for military/defense caliber handguns. In overall configuration the 1912's connection to the 1910 is readily apparent, with fixed sights on the partially enclosed barrel and the serrated slide, external guide pin for the recoil spring, near-90 degree grip angle, safety switch with spring-loaded release, and heel mounted magazine catch, though deviates with the aforementioned stuetzklappe, a sideplate release lever on the left side, and the overall increased dimensions and mass. The slide is marked "WAFFENFABRIK MAUSER A-G. OBERNDORF A.N MAUSER'S PATENT." on the left side, "53" on the slide, barrel, frame, guide pin, trigger, and sideplate, with smooth grip and an unmarked modified magazine. Manufacturer: Mauser Model: 1912 BBL: 4 3/8 inch round Gauge: 9mm Luger Finish: bright Grips: hardwood Serial Number53 Class: Curio & Relic Handgun

Lot: 303 - Excellent Mauser Early Small Ring Broomhandle Pistol

Excellent Mauser Early Small Ring Broomhandle Semi-Automatic Pistol with Matching Shoulder Stock Manufactured c.1904-1905, the early small ring Broomhandle marks the introduction of features like the small ring hammer and reoriented safety lever which would remain standards until the end of Broomhandle production, while also retaining the earlier long extractor. Blade front and 1000-meter tangent rear sights, with the three-line address, "crown/crown/U" and "antler" markings on the chamber, two-line address on the right side of the frame, and matching numbers on multiple components, including the safety, floorplate and 35-groove grips. An importer mark is present on the left side of the grip frame. Included with the pistol is a matching numbered shoulder stock with custom leather shoulder harness. Manufacturer: Mauser Model: Broomhandle BBL: 5 1/2 inch round Gauge: 7.63mm Mauser Finish: blue Grips: hardwood Serial Number36165 Class: Curio & Relic Handgun

Lot: 304 - WWI German DWM 1917 Dated Artillery Luger Semi-Automatic Pistol

World War I German DWM 1917 Dated Model 1914 Artillery Luger Semi-Automatic Pistol Manufactured in 1917, with fine adjustable blade front and tangent rear sights, "1917" date on the chamber, "DWM" on the front toggle link, and appropriate military proofs on the barrel, receiver, and breechblock. Minus the nickel finished wood base magazine numbers are matching overall, including inside the grip. Blue finish overall, with straw finished small parts, checkered grips and nickel finished magazine. Manufacturer: DWM Model: Luger BBL: 8 inch round Gauge: 9mm Luger Finish: blue Grips: hardwood Serial Number1940b Class: Curio & Relic Handgun

Lot: 305 - Cased Miniature Mauser 712 "Schnellfeuer" Broomhandle Pistol

Cased Miniature Mauser Model 712 "Schnellfeuer" Broomhandle Selective Fire Pistol with Holster Stock Manufactured c. late 20th century to early 21st century as an approximately 1/2 scale, non-firing, miniature of the Mauser Model 712 "Schnellfeuer" Broomhandle selective fire pistol. It has proper Mauser markings on top of the chamber and on the frame, a blade front sight and graduated ladder rear sight, serial number "002" on the upper left of the breech, a selector switch, safety, and it is wearing a set of serrated walnut grips. Includes a hardwood display case with green felt lined fitted interior and wire inlaid initials "VK" on the lid with oak leaf relief carvings surrounding a wire inlaid monogram in a shield, a miniature holster stock, an extra magazine, and 4 miniature dummy cartridges. Manufacturer: None Model: None BBL: 1 3/4 inch round Finish: blue Grips: walnut Serial Number002 Class: Other

Lot: 306 - Cased Hutchens Miniature DWM Model 1902 Commercial Luger Pistol

Cased Raymond Hutchens Miniature German DWM Model 1902 Commercial "Fat Barrel" Luger Semi-Automatic Pistol Manufactured c. late 20th century to early 21st century with a very high level of detail by noted miniature maker Raymond Hutchens of Indiana as an approximately 1/2 scale, non-firing, miniature replica of the DWM Model 1902 Commercial "Fat Barrel" Luger semi-automatic pistol. The pistol has a blade front sight and notch rear sight, the chamber is undated, the DWM monogram is marked on the toggle, "GERMANY" is marked on the front of the frame, and it is wearing a set of checkered hardwood grips. The matching visible full serial number "22874" is marked on the bottom of the barrel and front of the frame, with matching partial numbers on some small parts. Includes a hardwood case with felt lined fitted interior and a DWM monogram latch button and an extra magazine. Both of the included magazines are marked "Cal 9m/m" on the bases. Manufacturer: None Model: None BBL: 2 inch round Finish: blue/straw Grips: hardwood Serial Number22874 Class: Other

Lot: 307 - Cased Thierry Duget Gold Inlaid Pair of Miniature Luger Pistols

Well-Documented Cased Thierry Duget Gold Inlaid Pair of Imperial Miniature Armory Miniature German Erfurt Luger Semi-Automatic Pistols with Ivory Grips -A) Gold Inlaid Miniature Erfurt Luger Pistol Well-Documented Cased Thierry Duget Gold Inlaid Pair of Imperial Miniature Armory Miniature German Erfurt Luger Semi-Automatic Pistols with Ivory Grips -A) Gold Inlaid Miniature Erfurt Luger Pistol Offered here is a cased pair of approximately 1/2 scale, non-firing, miniatures of the Luger semi-automatic pistol manufactured c. 1990s by Joel Morrow's firm known as both Imperial Russian Armory and Imperial Miniature Armory. Both pistols feature gold inlaid borders done by Thierry Duget as well as gold inlaid "1912" dates on the chambers and "ERFURT" on the toggles and are wearing ivory grips. The serial number "08" is marked on the left of the barrel extension. Includes a hardwood case with green felt interior fitted for the pair of miniature Lugers, a miniature ammunition box, and 12 miniature dummy cartridges. This exact cased set of miniature Lugers is pictured on page 122 of “The Art of Miniature Firearms: Centuries of Craftsmanship”. Manufacturer: None Model: None BBL: 2 inch round Finish: blue/gold Grips: ivory Serial Number08 Class: Other B) Gold Inlaid Miniature Erfurt Luger Pistol See "A." The serial number "10" is marked on the left of the barrel extension. Manufacturer: None Model: None BBL: 2 inch round Finish: blue/gold Grips: ivory Serial Number10 Class: Other

Lot: 308 - Documented Mauser Cone Hammer Broomhandle with Stock

Antique Documented Mauser Cone Hammer Broomhandle Semi-Automatic Pistol with Matching Number Shoulder Stock Manufactured c. 1898, this pistol is recorded by serial number on page 46 of "System Mauser" by Breathed and Schroeder, as an example of a Broomhandle with a "1-10" pattern rear sight. Blade front and tangent rear sights, the latter graduated "1" through "10", with the three-line address, "crown/crown/U" and "antler" marks on the chamber, long extractor, milled-out right side frame panel, and 23-groove grips. Matching numbers are present on multiple components, including the firing pin retention plate, hammer, frame, follower, floorplate, and grips. Included with the pistol is a shoulder stock with matching number on the iron. A published antique Cone Hammer with matching stock is a highly desirable early C96 variation. Manufacturer: Mauser Model: Broomhandle BBL: 5 1/2 inch round Gauge: 7.63mm Mauser Finish: blue Grips: hardwood Serial Number3777 Class: Antique

Lot: 309 - Excellent WWI German "1916" Date DWM 1914 Artillery Luger Pistol

Excellent World War I German "1916" Dated DWM Model 1914 Artillery Luger Semi-Automatic Pistol with Shoulder Stock and Holster Rig, Double Magazine Pouch, and First Model Trommelmagazin The chamber is dated "1916" on top and the "DWM" monogram is on the toggle link. It has a drift adjustable blade front sight, adjustable tangent rear sight, three crown above Gothic letter German military proofs on the right of the barrel extension, and Imperial eagle firing proofs on the barrel, barrel extension, and breech block. All matching visible full and partial serial numbers marked on various components including on the firing pin and interiors of both checkered walnut grip panels. The three total included nickel finished magazines are numbered to match on each of their walnut bases. Includes a board shoulder stock with number "1451a" on the iron section and a crown above Gothic letter stamp on the side, an artillery pattern brown leather holster with a "1916" date and maker stamp on the interior of the flap along with stencil letters "B.A.IV" in black ink signifying the Army Corps clothing department from which the holster was distributed, cleaning rod, two takedown tools, leather double magazine pouch, and a first model "trommelmagazin" snail drum magazine numbered "32606". Note: This item features a high-capacity magazine which has a capacity above 15 rounds and cannot be sold or transferred to individuals in CA, CO, CT, DC, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: DWM Model: 1914 Artillery BBL: 7 7/8 inch round Gauge: 9mm Luger Finish: blue/straw Grips: walnut Serial Number3082a Class: Curio & Relic Handgun

Lot: 310 - Very Scarce Verchromt Finish Pre-WWII Walther PPK Pistol

Very Scarce Verchromt Finish Pre-World War II Walther PPK Semi-Automatic Pistol This is a lesser encountered example of a pre-World War II PPK pistol with the desirable verchromt (translates to chrome plated) finish from c. 1938-1939 production. This finish was applied to a very limited number of PPK and PP pistols during the 1930s, with some being exported throughout Europe and to the United States. Pistols with this finish are typically seen in the 785,000-185,000K serial number range. This example has standard markings including "crown/N" proofs on the right side of the slide, chamber, and barrel at the muzzle. The matching partial serial number "825" is correctly hand etched on the interior of the slide. It has a 60 degree safety, a checkered one-piece Walther banner grip, and is fitted with a proper verchromt magazine with the Walther banner and finger extension base. Manufacturer: Walther Model: PPK BBL: 3 1/4 inch round Gauge: 32 ACP Finish: verchromt Grips: plastic Serial Number178825K Class: Curio & Relic Handgun

Lot: 311 - WWII German "1939" and "Eagle/F" Mauser Banner Police Luger

World War II German "1939" Date Mauser Banner "Eagle/F" Police Proofed Luger Semi-Automatic Pistol with Matching Magazine and Holster Manufactured in 1939 and one of an estimated total of 2,290 Mauser "banner" Luger pistols procured that year by the German Police with "eagle/F" acceptance proofs, reportedly around the 8989v-9690v and 4w-1162w serial number ranges, as discussed on page 146 of "Third Reich Lugers" by Jan Still. Features fixed blade front and notch rear sights, the "1939" date stamp on top of the barrel extension, the Mauser "banner" marked on top of the toggle link, commercial "crown/crown/U" proofs on the left side of the barrel extension and breech block, along with the aforementioned police proof on the right side of the barrel extension. Matching military pattern serial numbers on the frame, barrel, and barrel extension (properly sans suffix on the last two), along with matching "01" partial serial numbers visible on small parts. Matching numbered sideplate is also stamped with an "eagle/6" proof. A sear safety is installed on the extension, with no cuts made for a magazine well safety. Fitted with a pair of checkered walnut grips and a blued magazine with matching numbered alloy base with "1" above the number and a "+" below. Includes an E.G. Luener marked, "1938" dated, and "WaA159" proofed black leather flap holster. Manufacturer: Mauser Model: P08 BBL: 4 inch round Gauge: 9mm Luger Finish: blue Grips: walnut Serial Number501w Class: Curio & Relic Handgun

Lot: 312 - WWII Mauser 2nd Variation Kriegsmarine HSc Pistol

World War II Mauser Second Variation Kriegsmarine Model HSc Semi-Automatic Pistol Manufactured c. 1941, the second variation HSc retained the engraved Kriegsmarine marking of the first variation, while using the higher grip screw position that would be seen on the bulk of HSc production. "Axis Pistols" by Still on page 172 estimates total production at 7,000. Fixed sights, with "eagle/N" proofs on the slide and frame, engraved "eagle/M" Kriegsmarine proof on the frontstrap, matching numbers on the frame, slide and barrel, and checkered grips. Includes an extra magazine. Manufacturer: Mauser Model: HSc BBL: 3 1/4 inch round Gauge: 32 ACP Finish: blue Grips: hardwood Serial Number708469 Class: Curio & Relic Handgun

Lot: 313 - Pre-World War II Walther PPK Semi-Automatic Pistol with Holster

Pre-World War II Walther PPK Semi-Automatic Pistol with Holster Manufactured c. 1939. Blade front and notch rear sights, with standard slide markings, "crown/N" proofs on the muzzle, slide and chamber, and a proper matching hand-scribed number inside the slide. Fitted with a 60 degree safety, ring hammer, checkered Walther banner grips, and matching colored floorplate extension. Included with the lot is an Albrecht Kind "Akah" black leather flap holster and an extra magazine with flat steel base. Manufacturer: Walther Model: PPK BBL: 3 1/4 inch round Gauge: 32 ACP Finish: blue Grips: plastic Serial Number228430K Class: Curio & Relic Handgun

Lot: 314 - WWII German Mauser "243/1939" K98k Rifle with "R.F.V." Markings

World War II German Mauser "243/1939" Code K98k Bolt Action Rifle with Kriegsmarine and "R.F.V." Markings Manufactured in 1939. Blade front and tangent rear sights, with "eagle/M" and "eagle/26" proofs on the stock, and matching numbers on the bolt, rear sight, follower, floorplate, trigger guard, barrel bands, stock and buttplate. The buttplate is marked "R.F.V./3580" between the screws. The RFV (Reichs Finance Administration), active from 1919 to 1945, was the chief tax authority of the Weimar Republic and Germany under the NSDAP, with responsibility to protect and administer tax, lottery, and pension funds. Manufacturer: Mauser Model: 98 BBL: 23 3/4 inch round Stock: laminate Gauge: 8x57mm Finish: blue Serial Number6634u Class: Curio & Relic Long Gun

Lot: 315 - Pre-WWII German Berlin Suhler Waffen "BSW/1937" K98k Mauser

Scarce Pre-World War II German Berlin Suhler Waffen "BSW/1937" Code K98k Mauser Bolt Action Rifle This K98k bears the "BSW/1937" manufacturer code and date on the receiver ring. Berlin Suhler Waffen made these rifles for only a few years in 1937-1939 before production moved to the "bcd" factory. It has a blade front sight, tangent rear sight, milled components, small "eagle/4" proof stamps on various components, a smooth pistol grip stock with an "eagle/H" German Army stamp on the right side and "eagle/WaA4" proof stamps, and a cupped steel buttplate. All matching visible serial numbers marked on the barrel bands, rear sight assembly, barrel, receiver, bolt assembly, trigger housing, floorplate, stock and buttplate. Manufacturer: BSW (Berlin-Suhler Waffen) Model: 98 BBL: 23 3/4 inch round Stock: walnut Gauge: 8x57mm Finish: blue Serial Number3782b Class: Curio & Relic Long Gun

Lot: 316 - Commercial Mauser Gew. 98 "Wehrmannsgewehr" Target Rifle

Post-World War I Commercial Production Mauser Obendorf Gew. 98 "Wehrmannsgewehr" Bolt Action Target Rifle Built off of a WWI era military Gew. 98 receiver, arsenal reworked after World War I to be in compliance with the Treaty of Versailles. These rifles are often referred to as "Wehrmannsgewehr" or "serviceman's rifles," intended for civilian or paramilitary target practice chambered for the commercial 8.15x46 mm R cartridge instead of the military 7.92x57 mm cartridge which was restricted after World War I, and were mostly manufactured in single-shot only configuration without an internal magazine, spring, and follower installed. This example has a non-standard blade front sight dovetailed to the front sight base, a non-standard adjustable notch rear sight fitted to the standard rear sight base (stars stamped at "8" and "10" graduations), a "N" marked on top of the barrel, the three-line Mauser markings and the date "1915" on top of the receiver ring, along with "crown/B" and "crown/U" proofs on the receiver and bolt. Matching visible full "409" serial numbers on the receiver, barrel, and bolt, along with visible matching partial "09" serial numbers on the safety and bolt release latch. Fitted with a smooth walnut handguard and semi-pistol grip stock. Manufacturer: Mauser Model: GEW 98 BBL: 29 inch round Stock: walnut Gauge: 8.15x46mmR Finish: blue/bright Serial Number409 Class: Curio & Relic Long Gun

Lot: 317 - WWII German Occupation Steyr "bnz45" K98k Mauser Rifle

Late World War II German Occupation Steyr "bnz45" Code K98k Kriegsmodell Mauser Bolt Action Rifle Manufactured in Austria under German occupation in 1945 late in World War II. This example falls towards the very end of the final "T" suffix serial block of Steyr K98k rifles with numbers believed to end around 65xxT. As a simplified Kriegsmodell variant, this rifle correctly has no provision for a bayonet lug or cleaning rod. "Mod.98" above the "bnz45" Steyr manufacturer code and date marked on the receiver ring. It has standard hooded blade front and tangent rear sights, some stamped steel components, a smooth pistol grip stock, and a cupped steel buttplate. Matching visible serial numbers on the barrel, rear sight assembly and bolt assembly. Fitted with a period leather sling. Manufacturer: Steyr Model: 98 BBL: 23 3/4 inch round Stock: walnut Gauge: 8x57mm Finish: phosphate Serial Number6264T Class: Curio & Relic Long Gun

Lot: 318 - Pre-WWII Era Mauser Commercial MS 350 Bolt Action Rimfire Rifle

Pre-World War II Era Mauser Commercial MS 350 Bolt Action Rimfire Rifle Manufactured c. 1933-1939. Features fixed hooded and ramped blade front and adjustable tangent notch rear (graduated from "30" to "200") sights, two "R/W" stamps and "Ch51" marked on the underside of the barrel, a Mauser banner on top of the receiver ring with the Mauser address marked on the left side, matching visible full serial numbers on the left of the receiver and barrel, along with "eagle/N" proofs on the receiver, barrel, and bolt handle. Fitted with a finger gasping grooved and multi-point checkered semi-pistol grip walnut stock with a Mauser Banner stamp on the right of the butt and a checkered Mauser banner plastic buttplate, along with a blued magazine with a Mauser banner on the base. Manufacturer: Mauser Model: Ms350b BBL: 26 3/4 inch round Stock: walnut Gauge: 22 Long Rifle Finish: blue Serial Number125077 Class: Curio & Relic Long Gun

Lot: 319 - Massive W. W. Greener 8-Bore Backaction Hammer Double Rifle

Massive South Africa Shipped W. W. Greener 8-Bore Backaction Hammer Dangerous Game Double Rifle with Case Completed c. 1876 according to page 198 of Graham Greener's "The Greener Story", this fine 8-bore double rifle was then shipped to William & John Rawbone of Cape Town, South Africa. This rifle would have been an exceptional companion for either a professional hunter or a sportsman heading into the interior in pursuit of dangerous game like rhino, elephant, or cape buffalo. These 8-bore rifles were capable of firing a 1,250 grain projectile at a velocity of up to 1,500 feet per second, equating to over 7,000 foot pounds of energy at the muzzle, that is enough energy to put down even the hardiest game Africa has to offer. The 8-bore was consider the largest "practical" rifle chambering and was used with great success by many ivory hunters in the latter part of the 19th century. Though the 8-bore was eventually pushed out by the advent of Nitro Express family of cartridges around the turn of the century, to this day rifles like this live on and hold a special place in the heart of any sportsman that has ever hunted Africa. Built with massive browned Damascus steel barrels featuring a blade fore sight with protective ears and a four-leaf (one standing, three folding) rear sight on the matted flat solid rib which is marked "W.W. GREENER PATENT No. 3084/TREBLE GRIP FAST" and MADE FOR Wm & Jno RAWBONE. CAPE TOWN", sling stud on under rib, period Birmingham proof marks on the flats, and chambers with a single extractor. The barrels are fitted to the equally scaled Jones Underlever backaction which shows light scroll engraving on the small parts and is marked "W.W. GREENER" on either lockplate. The rifle features an early version of Greener's famous crossbolt, non-rebounding hammers, and double triggers (front slightly articulated). The rifle is fitted with a nicely figured and large panel checkered splinter forend with casehardened iron and a wedge fastener as well as a beautifully figured pistol grip stock with multi-point checkering at the wrist, horn grip cap, blank stock oval, rear sling stud, and a smooth blued steel buttplate. Includes a maker's oak and leather flat case with "W.M.L." on the lid and containing cleaning tools, loading tools (many of which are casehardened), four bullet molds, turnscrews, an oil bottle, and snap caps. Length of pull 14 1/8 inches. Weight 15 lbs. 6 oz. Manufacturer: Greener Model: Double Rifle BBL: 24 inch solid rib Stock: walnut Gauge: 8 bore Finish: brown/blue/casehardened Serial Number16212 Class: Antique

Lot: 320 - Bruce Dean Engraved Mauser/Army & Navy C.S.L. Model 1893 Rifle

Bruce Dean Signed, Master Relief Carved, and Engraved Mauser/Army & Navy C.S.L. Model 1893 Bolt Action Rifle This rifle was sold by Army & Navy C.S.L. around 1896, and made its way to Australia where it was later embellished by the hand of highly regarded Master Engraver Bruce Dean, on behalf of Colin King, incorporating links to their home country immortalized in steel. The rifle has a blued steel stepped breach barrel featuring a beaded blade fore sight on a banded ramp base, 100 and 200 meter flip-up rear sight on a nicely engraved island base, London nitro proof marks at the left of the breech, and "SHOT & REGULATED BY ARMY & NAVY C.S.L. LONDON" (partial obscured by the rear sight base) on the top. The barrel is fitted to the blued parts matching 1893 Mauser action which bears German proof marks along with "WAFFENFABRIK/MAUSER/OBERNDORF A/N/1896." on the front receiver ring and is decorated with wild flannel flowers engraved on the bolt release and bolt handle which is carved into the form of a feral goat's head. The trigger guard is engraved with a wild boar bust in a panel scene and the floorplate has a regal Sambar stag in a panel, both are carved in deep relief and surrounded by scroll engraving terminating in more flannel flowers. The engraving is signed ahead of the front stock bolt "B DEAN" in relief. The rifle is fitted in a lightly figured round semi-pistol grip stock with mullered border multi-point wrap checkering on the forend, checkering at the wrist, shell lip forend tip, a carved ebony inlay at the rear of the upper tang, an engraved cartridge trap on the toe line engraved "7 X 57" and "Mauser", and an intricately carved steel Niedner style buttplate showing more flannel flowers signed again by Dean. Manufacturer: Mauser Model: 1893 BBL: 24 inch round Stock: walnut Gauge: 7x57 mm Finish: blue/coin Serial Number53 Class: Antique

Lot: 321 - Purdey Push-Forward Underlever Bar-in-Wood Double Barrel Shotgun

Factory Engraved James Purdey Push-Forward Underlever Bar-in-Wood Double Barrel Hammer Shotgun Completed in 1871 according to page 193 of Donald Dallas' "Purdey Gun & Rifle Makers: The Definitive History". The gun was built with Damascus steel barrels featuring a single bead sight on the smooth concave game rib which is marked "J. PURDEY, 514 1/2 OXFORD STREET,LONDON" and "2", period proof marks accompanied by 1971 dated Birmingham black powder reproofs, and chambers marked 2 1/2 inches with an extractor. The barrels are fitted to the brushed bright bar-in-wood action which displays attractive early bouquet and scroll engraving surrounding "PURDEY" signatures on either lockplate, "PATENT" on top of the action, "PATENT SAFETY" on the trigger guard bow, and "PURDEY/PATENT" on the underside before continuing onto the rebounding hammers, both tangs, and push-forward lever. The gun is fitted with an attractively figured and multi-point flat-top checkered splinter forend with engraved iron and wedge fastener as well as a straight grip stock with a checkered horn buttplate. Barrel and stock measurements (R/L): bore diameter nine inches from the breech both proofed at .740 inches and measured .743 inches; choke constriction .001/.002 inches; minimum wall thickness .022/.019 inches; 1 11/16 inch drop at comb; 2 1/16 inch drop at heel; 14 3/8 inch length of pull; slight cast-off, weight 6 lbs. 11 oz. Manufacturer: Purdey J & Sons Ltd Model: Double Hammer BBL: 30 inch solid rib Stock: walnut Gauge: 12 Finish: brown/brushed bright Serial Number8471 Class: Antique

Lot: 322 - George Armstrong Cape Gun with Case Inscribed to Baron De Vinck

Factory Engraved and Gold Inlaid George Armstrong Hammer Cape Gun with Case Inscribed to Baron De Vinck Manufactured c. 1870s. The gun has browned Damascus steel barrels featuring a blade fore sight and a platinum centerlined seven-leaf rear sight, one of which is a ladder graduated to 1,200 yards, on the broad flat solid rib marked "George Armstrong & Co. Cradock. No. 726." in gold inlay, ram-rod ferrules with sling stud for an absent rod, period Birmingham proof marks, and chambers with extractor. The rifle barrel is likely chambered for .450 Black Powder Express. The barrels are fitted to the hammer fired action which displays classic English small scroll engraving around "G. Armstrong & Co." on either lockplate and featuring rebounding hammers and double triggers. The gun is fitted with an attractively figured and multi-point flat-top checkered splinter forend with engraved iron and wedge fastener escutcheon and a horn tip with sea shell lip as well as a straight grip stock with teardrop carved drop points, rear sling stud, an engraved patchbox on the right side, and a lightly engraved smooth steel buttplate. Includes a leather flat case marked "BARON DE VINCK JACQUES./ANVERS" on the lid. Baron Carl de Vinck de Deux-Orp was a Belgian diplomat and famed art collector. Length of pull 14 1/2 inches. Weight 9 lbs. 5 oz. Manufacturer: Armstrong & Co. Model: Cape Gun BBL: 28 inch solid rib Stock: walnut Gauge: 16 Finish: brown/casehardened/gold Serial Number726 Class: Antique

Lot: 323 - Engraved Westley Richards 20 Ga Highest Quality Droplock Shotgun

Factory Game Scene Engraved Westley Richards 20 Gauge Highest Quality Hand Detachable Droplock Double Barrel Shotgun with Case Completed by Westley Richards & Co., one of England's top makers of fine arms, between 1901 and 1908 according to their published serial number data. Built with blacked steel dovetail lump barrels featuring a single bead sight on the smooth concave game rib which is marked "WESTLEY RICHARDS 178 NEW BOND St. LONDON" along with scroll engraving, wedges of scroll engraving at the breech, period Birmingham proof marks on the flats, and chambers marked for 7/8 oz. shot (2 1/2 inches) with ejectors. The barrels are fitted to the beautifully case colored scalloped hand detachable droplock action which displays highly attractive "Highest Quality" motif engraving consisting of floral scroll surrounding carved fences, "WESTLEY RICHARDS" on either side, as well as five wonderful game scenes. The game scenes consist of a nide of pheasant cocks in a field on the left, a black grouse standing in a field on the underside, a covey of partridge on the right side, a grouse on the Westley patent toplever, and a pointing setter on the guard bow, all cut in fine detail. The gun features Westley's single selective "One Trigger" with gold inlaid indicators and a tang mounted Westley "Beetle Back" automatic safety with a gold inlaid "SAFE". The gun is fitted with highly figured and fancy fleur-de-lis checkered splinter forend with horn tip and engraved casehardened iron and Deeley release as well as a round semi-pistol grip stock with blank gold stock shield and a Pachmayr Old English recoil pad. Includes a later oak and leather flat case with added maker's trade label containing an oiler, snap caps, and cleaning tools. Barrel and stock measurements (R/L): bore diameter nine inches from the breech both proofed at "20" (.615 inches) and measured .626 inches; choke constriction .009/.019 inches; minimum wall thickness .021/.023 inches; 1 1/2 inch drop at comb; 2 3/16 inch drop at heel; 13 11/16 inch length of pull; weight 6 lbs. 1 oz. Manufacturer: Westley Richards Model: Double Barrel Shotgun BBL: 28 inch solid rib Stock: walnut Gauge: 20 Finish: black/casehardened Serial Number16950 Class: Curio & Relic Long Gun

Lot: 324 - Engraved Holloway & Naughton Sidelock Double Barrel Shotgun

Factory Game Scene Engraved Holloway & Naughton Sidelock Double Barrel Shotgun Completed between 1925 and 1929 according to Nigel Brown on page 142/3 of his "British Gunmakers Volume Three". Guns by Holloway & Naughton are rarely encountered, and this is one of the highest grade guns made by the firm. Built with blacked steel dovetail lump barrels featuring a single bead sight on the smooth concave game rib which is marked "HOLLOWAY & NAUGHTON LTD MAKERS BIRMINGHAM" along with a flourish of scroll, wedges of acanthus scroll at the breech, 2025 dated London reproof marks on the flats, import mark on left tube, and chambers marked 2 3/4 inches with ejectors. The barrels are fitted to the brushed bright finished sidelock bar-action which is decorated with tight traditional scroll engraving surrounding carved dog's head busts on the sideclipped fences, "HOLLOWAY & NAUGHTON" on either lockplate, and game scenes depicting; a pointing setter and a trio of quail on the left, a trio of mallards on the underside, a mallard on the trigger guard, and a pointer and a pair of mallards on the right side. The gun features a hidden third fastener, double triggers, a gold inlaid "H&/N" in a shield on the toplever, and a tang mounted automatic safety with gold inlaid "SAFE". The gun is fitted with a beautifully figured and fancy fleur-de-lis checkered splinter forend with engraved iron and Anson button release as well as a straight grip stock with teardrop carved drop points, a blank stock oval, and a checkered horn buttplate. Barrel and stock measurements (R/L): bore diameter nine inches from the breech both proofed and measured at 18.6 (.732 inches); choke constriction .007/.032 inches; minimum wall thickness .021/.018 inches; 1 1/2 inch drop at comb; 2 3/8 inch drop at heel; 14 1/2 inch length of pull; weight 6 lbs. 6 oz. Manufacturer: Holloway & Naughton Model: Double Barrel BBL: 28 inch solid rib Stock: walnut Gauge: 12 Finish: black/brushed bright Serial Number44020 Class: Curio & Relic Long Gun

Lot: 325 - Pair of William Powell & Son Best Quality Sidelock Shotguns

Pair of Factory Engraved William Powell & Son Best Quality Sidelock Double Barrel Shotguns with Case -A) William Powell & Son Shotgun Pair of Factory Engraved William Powell & Son Best Quality Sidelock Double Barrel Shotguns with Case -A) William Powell & Son Shotgun Completed c. 1913. Both guns were built with blacked steel chopperlump barrels featuring a single bead sight on the smooth concave game rib with doll's head extension which is marked "WILLIAM POWELL & SON, 35 CARRS LANE, BIRMINGHAM." along with a gold inlaid "1" or "2" in a flourish of scrollwork, period Birmingham proof marks, and chambers marked 2 1/2 inches with South Gate ejectors. The barrels of each are fitted to a casehardened sidelock bar-action which displays expertly cut classic English bouquet and scroll engraving surrounding "WILLIAM POWELL & SON" on either lockplate and a gold "1" or "2" on the toplever. The guns both feature a third bite, intercepting sears, double triggers, and a tang mounted automatic safety with gold "SAFE". The guns are both fitted with a beautifully figured and multi-point checkered splinter forend with engraved casehardened iron and Anson button release marked with a gold "1" or "2" as well as a straight grip stock with teardrop carved drop points, a silver stock oval with a stag and griffin symbolizing the triumph of wisdom over aggression, and a leather covered recoil pad. Includes a period leather flat case with "F.H.G." on the lid relined in burgundy baize and containing two turnscrews, two oil bottles, and some cleaning tools. Barrel and stock measurements (R/L): bore diameter nine inches from the breech both proofed at "12" (.729 inches) and measured .735/.734 inches; choke constriction .011/.010 inches; minimum wall thickness .023/.025 inches; 1 1/2 inch drop at comb; 2 1/8 inch drop at heel; 14 11/16 inch length of pull; weight 6 lbs. 11 oz. Manufacturer: William Powell & Son Model: Side By Side BBL: 28 inch solid rib Stock: walnut Gauge: 12 Finish: black/casehardened Serial Number12565 Class: Curio & Relic Long Gun B) William Powell & Son Shotgun As described in "A". Barrel and stock measurements (R/L): bore diameter nine inches from the breech both proofed at "12" (.729 inches) and measured .735/.734 inches; choke constriction .009/.010 inches; minimum wall thickness .024/.025 inches; 1 1/2 inch drop at comb; 2 1/8 inch drop at heel; 14 11/16 inch length of pull; weight 6 lbs. 13 oz. Manufacturer: William Powell & Son Model: Side By Side BBL: 28 inch solid rib Stock: walnut Gauge: 12 Finish: black/casehardened Serial Number12566 Class: Curio & Relic Long Gun

Lot: 326 - John Dickson & Son Assisted-Opening Round Body Shotgun

Scarce Factory Engraved John Dickson & Son Assisted-Opening Round Body Double Barrel Shotgun with Case Completed in 1917 according to page 81 of Nigel Brown's "British Gunmaker's Volume Two: Birmingham, Scotland & the Regions" as one of fewer than 2,000 of these round action guns completed since 1880. The gun has blacked steel chopperlump barrels featuring a single bead sight on the smooth concave game rib which is marked "JOHN DICKSON & SON, 63 PRINCES STREET EDINBURGH." along with a flourish of scroll engraving around a gold "2", a band of engraving at the breech, import mark on under rib, period London proof marks, and chambers measured 2 1/2 inches with ejectors. The barrels are fitted to the casehardened Dickson patent treble grip assisted-opening round body triggerplate action which displays rare near full coverage bold scroll engraving surrounding "JOHN DICKSON & SON./PATENT" markings on either side before continuing onto the upper tang, blacked toplever which has a gold "2", and blacked trigger guard/lower tang. The engraving was likely cut by the shop of Harry Kell in SoHo. The gun features an exceedingly rare Dickson 1910 patent non-selective single trigger and a tang mounted automatic safety with gold inlaid "SAFE" indicator. The gun is fitted with a highly figured splinter forend with engraved casehardened iron and Anson button release with gold inlaid "2" as well as a straight grip stock with blank gold stock oval and a leather covered recoil pad. Includes a maker's leather flat case, cleaning tools, and a pair of snap caps. Barrel and stock measurements (R/L): bore diameter nine inches from the breech proofed at "12" (.729 inches) and measured .735/.737 inches; choke constriction .008/.021 inches; minimum wall thickness .025/.025 inches; 1 3/8 inch drop at comb; 2 inch drop at heel; 15 3/16 inch length of pull; cast-off; weight 6 lbs. 6 oz. Manufacturer: John Dickson & Sons Model: SxS BBL: 29 inch solid rib Stock: walnut Gauge: 12 Finish: blue/casehardened Serial Number6693 Class: Curio & Relic Long Gun

Lot: 327 - Pair of Engraved W. W. Greener G125 Grade Double Barrel Shotguns

Pair of Factory Game Scene Engraved W. W. Greener G125 Grade Double Barrel Shotguns with Case -A) W. W. Greener Grade G125 Shotgun Pair of Factory Game Scene Engraved W. W. Greener G125 Grade Double Barrel Shotguns with Case -A) W. W. Greener Grade G125 Shotgun This pair was completed c. 1925 according to page 199 of Graham Greener's "The Greener Story". Each gun in the pair has blacked steel dovetail lump barrels featuring a single bead sight on the smooth concave game rib which is marked with the Greener address and a gold "1" or "2" at the base, 1953 and 1955 dated Birmingham reproof marks on gun "1" and "2" respectively, import mark on underside of left tube, and 2 1/2 inch chambers with Greener patent Unique ejectors. The barrels on gun "1" were sleeved at the time of reproofing and gun "2" has replaced barrels with re-laid original rib and 1980 dated Birmingham reproof marks. The barrels of both guns are fitted to a slightly bolstered casehardened Facile Princeps action which displays exceptional near full coverage tight scroll engraving with stalks of wheat surrounding the beautifully arcaded fences, a pointer and a quail on the left, a pair of quail and a snipe on the underside, a spaniel and mallards on the right, a spaniel with a hare on the trigger guard, and a gold inlaid coronet over "1" or "2" on the toplever. The guns both feature a hidden Greener crossbolt, double triggers, right hand beaded trigger guard, and tang mounted automatic safety with gold inlaid "SAFE". Each gun is fitted with a beautifully figured and multi-point checkered splinter forend with a horn tip and engraved iron and release with gold "1" or "2" as well as a straight grip stock with horn inlays at the drop points, "ALR" in the gold stock oval, and a thick leather covered recoil pad. Includes a maker's oak and leather flat case marked "A. L. ROBERTS" on the lid and containing cleaning tools, turnscrews, snap caps, and a Greener oil bottle. Barrel and stock measurements (R/L): bore diameter nine inches from the breech both proofed and measured at .729 inches; choke constriction .008/.020 inches; minimum wall thickness .031/.035 inches; 1 1/2 inch drop at comb; 1 7/8 inch drop at heel; 15 1/8 inch length of pull; significant cast-off; weight 6 lbs. 9 oz. Manufacturer: WW Greener Model: Grade 125 BBL: 28 inch solid rib Stock: walnut Gauge: 12 Finish: black/casehardened Serial Number67866 Class: Curio & Relic Long Gun B) W. W. Greener Grade G125 Shotgun As described in "A". Barrel and stock measurements (R/L): bore diameter nine inches from the breech both proofed at .729 inches and measured .733/.732 inches; choke constriction .009/.035 inches; minimum wall thickness .024/.024 inches; 1 9/16 inch drop at comb; 1 13/16 inch drop at heel; 15 1/16 inch length of pull; significant cast-off; weight 6 lbs. 8 oz. Manufacturer: WW Greener Model: Grade 125 BBL: 28 inch solid rib Stock: walnut Gauge: 12 Finish: black/casehardened Serial Number67867 Class: Curio & Relic Long Gun

Lot: 328 - Abercrombie & Fitch Retailed W. J. Jeffery No. 2 Rifle

Factory Engraved Abercrombie & Fitch Co. Retailed W. J. Jeffery Best No. 2 Mauser Bolt Action Rifle in .333 Jeffery Completed between 1913 and 1920 according to page of Nigel Brown's "British Gunmakers Volume One: London", and delivered to famed New York outfitter Abercrombie & Fitch Co., one of America's premier outfitters of the day and the exclusive retailer for W. J. Jeffery in the early 20th century. This rifle is a Jeffery "Best Quality" rifle and was the highest grade bolt action that they made at the time. The rifle is chambered for the .333 Jeffery, which was used in the period for all manner of game and even tested during World War I as a sniper cartridge for punching through German steel plates, a task which it readily achieved. The rifle was built with a blacked "Q.S." nickel steel barrel featuring a sleeved on beaded blade fore sight on an island base, an attachment point for a sling eye (broken but included), and a sleeved on five folding leaf express rear sight with leaves folding toward the muzzle. The barrel is marked "W. J. JEFFERY & Co. Ltd. 26 BURY STREET. St JAMES' LONDON. 24.676." and "NICKEL GUN BARREL STEEL/QS/TRADE MARK" ahead of the rear sight and "MADE EXPRESSLY FOR/ABERCROMBIE & FITCH Co. NEW YORK" behind the rear sight along with period Birmingham proof marks. The barrel is fitted to the blacked original single square bridge Mauser 98 action as ordered by Jeffery which still bears the original Oberndorf marking on the action wall and matching partial serial numbers on the components as well as beautiful, factory No. 2 executed, acanthus scroll engraving on the front receiver ring and the top of the rear bridge. The blacked straddle floorplate with Oberndorf bump and the inside-the-bow release trigger guard are also engraved with the lovely acanthus scroll and leaves. The rifle is fitted with an attractively figured and multi-point flat-top checkered pistol grip stock with horn forend tip and single screw grip cap, rear sling swivel, and a checkered steel trapdoor buttplate containing a spare firing pin with spring. Manufacturer: Mauser Model: 98 BBL: 20 inch round Stock: walnut Gauge: 333 Jeffery Finish: black Serial Number24.676. Class: Curio & Relic Long Gun

Lot: 329 - Engraved Winchester Model 52 Rifle Stocked by S. Griffin

Attractive Engraved and Gold Inlaid Winchester Model 52 Bolt Action Rifle Stocked by Seymour Griffin Manufactured in 1921, the first year of production for the Model 52, and subsequently beautifully embellished. The blued Winchester Proof Steel target barrel features a beaded post sight in a Lyman 7A globe front sight which is encompassed in a flourish of scroll engraving, a pair of scope blocks, and standard factory markings and proof near the left of the breech. The barrel is fitted to the blued action which displays near full coverage ornamental acanthus scroll engraving surrounding a gold inlaid bust of a bugling bull elk over a bullseye target in the background with a crossed rifle and German target paddle beneath. The action is fitted with a Lyman 48J rear peep sight and a two-panel checkered bolt knob. The floorplate and trigger guard are engraved with matching acanthus scrollwork all surrounding a gold monogram on the trigger guard with the letters "SMC". The engraving is unsigned, but was clearly done by a skilled hand trained in the Germanic style. The rifle is fitted with a beautifully figured and multi-point checkered pistol grip stock by famed New York stock maker, and co-founder of the world renowned Griffin & Howe firm, Seymour Griffin who signed the rifle "S. R. GRIFFIN/NEW YORK" on the front edge of the trigger guard. The stock features a Schnabel forend, black grip cap, sling studs, and an engraved and checkered Niedner style steel buttplate. Manufacturer: Winchester Model: 52-Rifle BBL: 28 inch round Stock: walnut Gauge: 22 Long Rifle Finish: blue/gold Serial Number1954 Class: Curio & Relic Long Gun

Lot: 330 - Pair of "Cripple Stock" Henry Atkin "Spring Opener" Shotguns

Pair of Factory Game Scene Engraved "Cripple Stock" Henry Atkin Spring Opener" Sidelock Double Barrel Shotguns -A) Henry Atkin Shotgun Pair of Factory Game Scene Engraved "Cripple Stock" Henry Atkin Spring Opener" Sidelock Double Barrel Shotguns -A) Henry Atkin Shotgun This pair of fine "cripple stock" guns was completed c. 1968 according to Nigel Brown's "British Gunmakers Volume One: London" and would have been for a right handed gentleman to shoot strong hand with his left eye in line with the rib. Each gun in the pair is built with blacked steel chopperlump barrels featuring a single brass bead sight on the smooth concave game rib which is marked with a gold "1" or "2" in a flourish of scroll engraving at the base, "HENRY ATKIN LTD." and "7 BURY STREET, St. JAMES'S, LONDON, ENGLAND" on the right and left tubes respectively, import mark on left tube, and chambers marked 2 3/4 inches with ejectors. The barrels of each gun are fitted to a casehardened "spring opener" sidelock action, based on Purdey's Beesley patent, which is curved with the stock shape and displays attractive ornamental scroll engraving surrounding a gold "1" or "2" on the toplever, "HENRY ATKIN LTD" on both lockplates, and three game scenes in vignettes, all depicting partridge and pheasants. The guns feature bushed firing pins, intercepting sears, double triggers (front articulated), and a tang mounted automatic safeties with gold inlaid "SAFE". Each gun is fitted with a beautifully figured and multi-point flat-top checkered splinter forend with engraved brushed bright iron and Anson release with gold "1" or "2" as well as the right hand off-set "cripple stock" with teardrop carved drop points, "L.S.W." in the stock oval, and a checkered butt. Barrel and stock measurements (R/L): bore diameter nine inches from the breech both proofed and measured at .729 inches; choke constriction .008/.018 inches; minimum wall thickness .028/.027 inches; 1 9/16 inch drop at comb; 2 13/16 inch drop at heel; 15 1/8 inch length of pull; weight 6 lbs. 10 oz. Manufacturer: Henry Atkin Model: Double Barrel BBL: 28 inch solid rib Stock: walnut Gauge: 12 Finish: black/casehardened Serial Number20789 Class: Curio & Relic Long Gun B) Henry Atkin Shotgun As described in "A". Barrel and stock measurements (R/L): bore diameter nine inches from the breech both proofed and measured at .729 inches; choke constriction .010/.016 inches; minimum wall thickness .027/.030 inches; 1 11/16 inch drop at comb; 2 5/8 inch drop at heel; 15 1/8 inch length of pull; weight 6 lbs. 11 oz. Manufacturer: Henry Atkin Model: Double Barrel BBL: 28 inch solid rib Stock: walnut Gauge: 12 Finish: black/casehardened Serial Number20790 Class: Curio & Relic Long Gun

Lot: 331 - India Retailed English Dangerous Game Double Rifle in .450-400

Factory Engraved Goolamhusain Allibhoy & Sons Ltd. Retailed English Grand Prix Long Range Model P Dangerous Game Double Rifle in .450-400 Nitro Express Manufactured in England around the turn of the 20th century, this rifle made its way to Bombay, India, to the shop of Goolamhusain Allibhoy & Sons Ltd. From there, it was purchased by a gentleman who was clearly quite a serious hunter, and likely used to hunt all manner of game in India, from tiger to elephant. If this rifle could talk, oh the stories it could tell, of a wild India sparsely settled by Europeans in the days of legendary hunters like Jim Corbett, who used a similar .450-400 N.E. double rifle (his by W. J. Jeffery), to hunt the man-eaters of Kanda and Mohan, exploits he details in his famous book "Man-Eaters of Kumaon". This rifle was built with black steel chopperlump barrels featuring a beaded blade fore sight with flip-up moon bead on the ramp base, five-leaf (one standing, four folding) rear sight on the quarter rib, Goolamhusain Allibhoy & Sons Ltd. marking and "GRAND PRIX LONG RANGE RIFLE MODEL P" on the right tube, mostly obscured load information on the left tube (3 1/4 inch case), sling swivel, period Birmingham proof marks on the flats, and chambers with ejectors. The barrels are fitted to the blacked action which displays scroll engraving surrounding "MADE IN ENGLAND" on either side as well as a tiger on the left, a hound and stag on the underside, and an elephant on the right. The rifle features bushed firing pins, a Greener crossbolt, double triggers, and a tang mounted automatic safety. The rifle is fitted with an attractively figured and multi-point checkered splinter forend with engraved iron and Anson release as well as a pistol grip stock with bolstered flats, engraved blacked grip cap, shadowline cheekpiece, rear sling swivel, blank stock oval, and a Decelerator recoil pad. Length of pull 14 5/8 inches. Weight 10 lbs. 13 oz. Manufacturer: British Model: Double Rifle BBL: 26 inch solid rib Stock: walnut Gauge: 450-400 Nitro Express Finish: black Serial Number5259 Class: Curio & Relic Long Gun

Lot: 332 - Brown Brothers Relief Sculpted Holland & Holland 4 Bore Shotgun

Important, Rare, Magnificent and Well-Documented Factory Brown Brothers Signed and Deep Relief Sculpted Holland & Holland "The Herculean 4 Bore" Sidelock Double Barrel Shotgun For nearly two centuries, Holland & Holland has stood among the most revered names in the gunmaking world, producing firearms that represent the absolute pinnacle of craftsmanship, artistry, and mechanical

Lot: 333 - Pair of Grifnee Engraved Holland & Holland 28 Gauge Shotguns

Masterpiece Consecutive Pair of Factory Philippe Grifnee Bestial Master Engraved and Gold Inlaid Holland & Holland 28 Gauge Sidelock Over/Under Shotguns with Case -A) Holland & Holland 28 Gauge Shotgun Masterpiece Consecutive Pair of Factory Philippe Grifnee Bestial Master Engraved and Gold Inlaid Holland & Holland 28 Gauge Sidelock Over/Under Shotguns with Case -A) Holland &

Lot: 334 - Ken C. Hunt Engraved Purdey 20 Gauge Sidelock Over/Under Shotgun

Outstanding Ken C. Hunt Master Engraved and Gold Game Scene Inlaid J. Purdey & Sons 20 Gauge Extra Finish Sidelock Over/Under Shotgun with Purdey Letter James Purdey & Sons has long been one of the world's premier makers of fine arms, with this piece being an excellent example of their "best quality" work. This gun, according to the included letter from Purdey, was completed in October of 1961 for an A. G. Daniels. The letter further confirms the current gauge, chambers, barrel length, single trigger, ejectors, forend, safety, weight, and length of pull, though the barrel is listed as vent rib with dual beads, indicating what is likely a recording error. The letter further states that the "Gold birds on the action and gold dog on underside of action" executed by legendary British Master Engraver Ken C. Hunt. The gun was built with blacked steel demiblock barrels featuring a single bead sight on the matted flat tapered solid rib, "J. PURDEY & SONS." and "AUDLEY HOUSE. SOUTH AUDLEY STREET. LONDON. ENGLAND." engraved on the left and right of the upper tube, period London proof marks on the flats and right of the upper tube, and chambers marked 2 3/4 inches with gilded ejectors. The barrels are fitted to the casehardened Purdey improved Woodward type sidelock action. The action is engraved with beautifully executed ornamental acanthus scrollwork surrounded by "J. Purdey & Sons." inlaid in gold on either side of the action bar, "J. Purdey & Sons/London" in fancy script on the underside, and a trio of magnificent gold inlaid game scenes before continuing onto the toplever, trigger guard, and both tangs. The game scenes depict a covey of Gambel's quail running from cover preparing to flush on the left lockplate, a bust of a setter on the underside, and a pair of lighting mallards on the left lockplate, all inlaid in wonderful high detail. The gun features Purdey's Gate single gold trigger, ribbed cocking indicator on either lockplate, gilded lock work, and a tang mounted automatic safety with gold inlaid "SAFE" indicator. The gun is fitted with a beautiful highly figured and mullered border multi-point checkered beavertail forend with engraved black iron and case colored push-rod release as well as a pistol grip stock with teardrop carved flats, a polymer grip cap, blank gold stock oval, and a leather covered Silver's recoil pad. Barrel and stock measurements (U/O): bore diameter nine inches from the breech both proofed at .616 inches and measured .617/.618 inches; choke constriction .007/.016 inches; minimum wall thickness .028/.026 inches; 1 9/16 inch drop at comb; 1 5/8 inch drop at heel; 14 5/8 inch length of pull; slight cast-off; weight 6 lbs. 6 oz. Manufacturer: Purdey J & Sons Ltd Model: Over/Under BBL: 28 inch solid rib Stock: walnut Gauge: 20 Finish: black/casehardened/gold Serial Number26904 Class: Curio & Relic Long Gun

Lot: 335 - Hadi Engraved J. Purdey & Sons .410 Bore Shotgun Two Barrel Set

Fantastic and Scarce Factory Rashid El Hadi Signed and Master Engraved J. Purdey & Sons .410 Bore Extra Finish Self-Opening Sidelock Double Barrel Shotgun Two Barrel Set with Case James Purdey & Sons is one of the most highly regarded and outright revered names in the world of high end firearms, a reputation rightfully earned over their long and storied history in the trade. Every piece

Lot: 336 - Pair of M. Torcoli and Creative Art Engraved Ivo Fabbri Shotguns

Stunning Pair of Manrico Torcoli and Creative Art Signed, Panel Scene Master Engraved, and Gold Inlaid Ivo Fabbri 28/20 Gauge Pinless Sidelock Over/Under Two Barrel Set Shotguns with Case -A) Ivo Fabbri Shotgun Stunning Pair of Manrico Torcoli and Creative Art Signed, Panel Scene Master Engraved, and Gold Inlaid Ivo Fabbri 28/20 Gauge Pinless Sidelock Over/Under Two Barrel Set Shotguns with Case

Lot: 337 - Collinet Engraved Auguste Francotte .410 Bore Sidelock Shotgun

Factory R. Collinet Signed, Game Scene Engraved, and Relief Gold Inlaid Auguste Francotte .410 Bore Sidelock Double Barrel Shotgun Auguste Francotte was one of Liege's premier gunmakers for the firms entire existence, which spanned nearly 200 years, starting in 1810 and finally shutting their doors for good in 2001, leaving a legacy of fine guns like this wonderful .410 bore. Built with blued steel chopperlump barrels featuring a single bead sight on the raised smooth concave game rib, "AUG. FRANCOTTE - LIEGE/MADE IN BELGIUM" and "410 GA SHELLS 3" marked on the right and left tube respectively, 1982 dated Liege proof marks, a single band of engraving at the breech, and 3 inch chambers with automatic ejectors. The barrels are fitted to the lovely properly scaled down casehardened sidelock bar-action which displays beautifully executed Arabesque scroll engraving around a trio of relief gold inlaid game scenes before continuing onto the trigger guard, toplever, and both tangs. The game scenes consist of a bevy of doves in flight over a field on the left lockplate, a covey of quail flushing from cover on the right lockplate, and a woodcock in flight on the underside, all in fine detail. The engraving is signed "R. COLLINET" on the triggerplate to the right of the trigger guard. The gun features intercepting sears, nitre blue double triggers (front articulated), ribbed cocking indicators on either lockplate, and a tang mounted manual safety with gold inlaid "SAFE" indicator. The gun is fitted with a wonderfully well-figured and multi-point checkered semi-beavertail forend with engraved casehardened iron and blued Anson button release as well as a straight grip stock with teardrop carved drop points, a gold stock oval inscribed "TGK", and a Pachmayr Presentation recoil pad. Barrel and stock measurements (R/L): bore diameter nine inches from the breech proofed at 10.5/10.4 mm (.413/.410 inches) and measured .415/.414 inches; choke constriction .018/.024 inches; 1 5/16 inch drop at comb; 1 9/16 inch drop at heel; 14 5/8 inch length of pull; weight 5 lbs. 11 oz. Manufacturer: Francotte A Model: Sidelock BBL: 28 1/2 inch solid rib Stock: walnut Gauge: 410 Finish: blue/casehardened/gold Serial Number91609 Class: Modern Long Gun

Lot: 338 - Pair of Granetti Engraved Piotti Self-Cocking Hammer Shotguns

Exquisite Pair of Factory Oscar Granetti Signed and Master Game Scene Engraved Fratelli Piotti 20 Gauge Self-Cocking Double Barrel Hammer Shotguns with Case -A) Piotti Hammer Shotgun Exquisite Pair of Factory Oscar Granetti Signed and Master Game Scene Engraved Fratelli Piotti 20 Gauge Self-Cocking Double Barrel Hammer Shotguns with Case -A) Piotti Hammer Shotgun Each gun in this wonderful pair

Lot: 339 - Nuovo Cesella Engraved Beretta 20 Gauge SL3 Over/Under Shotgun

Factory "Nuovo Cesella" Signed and Engraved Beretta 20 Gauge SL3 Over/Under Shotgun with Cases Built with blued Excelsior steel monoblock barrels featuring a single bead sight on the matted flat vent rib, standard factory markings, Italian proof marks dated 2023, import mark on lower tube, trapezoidal shoulders, interchangeable chokes (improved cylinder/cylinder installed), and chambers marked 3 inches with ejectors. The barrels are fitted to the coin finished sideplated action which displays beautiful near full coverage ornamental scroll engraving over a blackened background surrounding "Beretta/SL3" banners on the left and right with "SL3" on the underside before continuing onto the toplever, trigger guard, and upper tang. The engraving is signed "Nuovo Cesella" on the triggerplate to the right of the trigger guard. The gun features a single trigger and a tang mounted safety/selector. The gun is fitted with a beautifully figured and multi-point checkered forend with matching engraved coin finished iron and release as well as a pistol grip stock with blank silver stock oval and a checkered butt. Includes a factory hard case, a factory canvas and leather flat case, and three extra choke tubes (modified, improved modified, and full). Barrel and stock measurements (U/O): bore diameter nine inches from the breech both proofed and measured at 15.9 mm (.626 inches); minimum wall thickness .032/.033 inches; 1 3/8 inch drop at comb; 2 1/8 inch drop at heel; 14 9/16 inch length of pull; slight cast-off; weight 6 lbs. 9 oz. Manufacturer: Beretta Pietro Model: SL3 BBL: 30 inch vent rib Stock: walnut Gauge: 20 Finish: blue/coin Serial NumberSL0448B Class: Modern Long Gun

Lot: 340 - Factory Engraved Gottfreid Juch Drilling with Leica Red Dot

Factory Game Scene Engraved Gottfreid Juch Drilling with Leica Red Dot Built with blued Bohler Super Blitz steel barrels featuring a beaded blade fore sight, flip-up rear sight, and a Leica Tempus red dot fitted to a claw mounted base on the matted solid rib marked "G. Juch-Ferlach", 1984 dated Austrian proof marks, import mark on lower tube, sling stud, and chambers with extractor. The rifle barrel is chambered for 7x65R, and the shotgun chambers are marked 3 inches and have choke constrictions of .020/.033 inches. The barrels are fitted to the coin finished sideplated triggerplate action which displays game scenes depicting a sounder of wild boars running on the left, a roe buck on the underside, and a German longhaired pointer flushing a pair of mallards from a pond on the right, all surrounded by attractive Germanic arabesque scroll. The gun features double Kersten crossbolts, bushed firing pins, double triggers (front single set), tang mounted safety, and rifle cocking piece. The gun is fitted with a beautifully figured and multi-point checkered forend with engraved coin finished iron and release as well as a pistol grip stock with slight left hand palm swell, rear sling stud, and black grip cap and heel/toe plates. Includes a Beretta takedown case. Length of pull 14 1/2 inches (lightly cast-on). Weight 8 lbs. 8 oz. (with red dot). Manufacturer: Juch Model: Drilling BBL: 27 5/8 inch solid rib Stock: walnut Gauge: 12 Finish: blue/coin Serial Number512486 Class: Modern Long Gun

Lot: 341 - A. Mack Engraved Krieghoff Neptun-D Drilling with Zeiss Scope

Factory A. Mack Signed and Game Scene Engraved Krieghoff Neptun-D Sidelock Drilling with Zeiss Scope and Red Dot Sight Built with blued steel monoblock barrels featuring a beaded blade fore sight, flip-up rear sight, and German claw mounts holding a Zeiss Diavari--ZM 1.5-6x42 mm scope on the matted solid rib, bands of engraving at the breech, sling swivel, import mark on rifle barrel, 1992 dated German proof marks, and chambers with extractors. The shotgun barrels have chambers marked 2 3/4 inches and choke constrictions of .014/.028 inches and the rifle is chambered for 7x65R. The barrels are fitted to a coin finished sidelock action which shows Germanic arabesque scroll engraving surrounding "KRIEGHOFF/NEPTUN-D" on the underside and a pair of game scenes depicting a roe buck and two does running through a forest on the left side and a fox flushing mallards from a pond on the right side, both in fine detail. The engraving is signed "AMack" on the left lockplate beneath the scene for Krieghoff Master Engraver Annemarie Mack. The gun features a Greener crossbolt, bushed firing pin plate, double triggers (front is single set), cocking indicators for the shotgun barrels, manual cocking piece for the rifle barrel, and tang safety. The gun is fitted with a beautifully figured and skip-line multi-point checkered forend with engraved iron and release and a pistol grip stock with traditional shadowline cheekpiece, engraved coined cartridge trap with sling swivel on the toe line, and leather covered recoil pad. Includes an Aimpoint Hunter red dot sight. Length of pull 14 3/8 inches. Weight 9 lbs. (with scope). Manufacturer: Krieghoff Heinrich Gun Co Model: Neptun-D BBL: 25 inch solid rib Stock: walnut Gauge: 12 Finish: blue/coin Serial Number92414 Class: Modern Long Gun

Lot: 342 - Lebeau-Courally 16 Gauge Imperial Extra Luxe Sidelock Shotgun

Factory Signed and Engraved Lebeau-Courally 16 Gauge Imperial Extra Luxe Self-Opening Hand Detachable Sidelock Double Barrel Shotgun Built with blued steel barrels featuring a single brass bead sight on the matted concave solid rib which is marked with a gold "1" at the base, "AUG. LEBEAU-COURALLY" and "ARMES DE GRAND LUXE A LIEGE" on the right and left tubes respectively, single band of engraving at the breech, 1970 dated Liege proof marks on the flats, and 2 3/4 inch chambers with automatic ejectors. The barrels are matted to the casehardened round body Beesley type self-opening hand detachable sidelock action with hidden third fastener which displays beautifully executed near full coverage floral scroll engraving which continues onto the toplever which has a gold inlaid "1", trigger guard, and both tangs. The triggerplate is signed "R. Smeety Grailnide S. M. LeRoi" to the right of the triggers. The gun features bushed firing pins, double triggers (front articulated), and a tang mounted manual safety with gold inlaid "S". The gun is fitted with a lovely highly figured and multi-point checkered forend engraved iron, blued Anson button release with a gold inlaid "1", and a gold inlaid crest with a pigeon over "IMPERIAL EXTRA LUXE". The straight hand stock is of the same impeccable quality with matching checkering at the wrist and a checkered butt. Barrel and stock measurements (R/L): bore diameter nine inches from the breech both proofed at 16.8 mm (.661 inches) and measured .667 inches; choke constriction .014/.023 inches; minimum wall thickness .024/.028 inches; 1 3/8 inch drop at comb; 2 7/16 inch drop at heel; 14 3/4 inch length of pull; slight cast-off; weight 6 lbs. 6 oz. Manufacturer: Lebeau Courally Model: Double Barrel BBL: 26 7/8 inch solid rib Stock: walnut Gauge: 16 Finish: blue/casehardened Serial Number44291 Class: Modern Long Gun

Lot: 343 - Galeazzi Engraved FAMARS Castore Self-Cocking Hammer Shotgun

Factory Angelo Galeazzi Signed, Gold Inlaid, and Master Engraved FAMARS Castore Double Barrel Self-Cocking Hammer Shotgun with Case Built with browned chopperlump steel barrels featuring a single bead on the smooth concave game rib marked "Fatto dalla Famars per Taurino Neri" (Made by Famars for Taurino Neri), gold bands at the muzzle and breech, import mark on left tube, 1973 dated Italian proof marks, and chambers marked 2 3/4 inches with ejectors. The barrels are fitted to the brushed bright finished self-cocking hammer action which displays English scroll engraving with rose bouquets on the hinge pins, a gold inlaid crown on the pierced toplever in the form of a wyvern, gold borders on the lockplates along with gold "ARMI FAMARS", and "Famars" marked on the underside. The engraving is signed "Galeazzi" on the triggerplate for world renowned Italian Master Engraved Angelo Galeazzi. The gun features double triggers (front articulated), right hand rolled trigger guard, and a tang mounted manual safety with gold inlaid "S". The gun is fitted with an attractively figured and multi-point checkered forend with engraved iron and inlaid FAMARS crest with the initials "N/D" as well as a straight hand stock with ribbed teardrop carved drop points and a checkered wood buttplate. Includes a maker's leather flat case with snap caps. Barrel and stock measurements (R/L): bore diameter nine inches from the breech both proofed at 18.4 mm (.724 inches) and measured .728 inches; choke constriction .020/.019 inches; minimum wall thickness .031/.029 inches; 1 1/2 inch drop at comb; 2 3/16 inch drop at heel; 14 13/16 inch length of pull; weight 7 lbs. 11 oz. Manufacturer: Famars A & S Model: Castore BBL: 27 7/8 inch solid rib Stock: walnut Gauge: 12 Finish: brown/brushed bright/gold Serial Number30261 Class: Curio & Relic Long Gun

Lot: 344 - Giovanelli Engraved Caesar Guerini .410 Bore Maxum Field Shotgun

Factory Bottega C. Giovanelli Engraved Caesar Guerini .410 Bore Maxum Field Over/Under Shotgun with Case Built with blued steel mono-block barrels featuring dual bead sights on the matted flat tapered vent rib, standard markings, 2018 dated Italian proof marks, import mark on lower tube, light engraving at the upper breech, interchangeable chokes, and chambers marked 3 inches with automatic ejectors. The barrels are fitted to the coin finished sideplated triggerplate action which displays beautiful full coverage floral scroll engraving surrounding "CAESAR/GUERINI" on either side and "MAXUM" on the underside. The triggerplate is signed "Bottega C. Giovanelli" for the famous firm. The gun features a single trigger and a tang mounted manual safety/selector. The gun is fitted with an attractively figured and multi-point checkered Schnabel forend with engraved iron as well as a semi-pistol grip stock with checkered wood buttplate. Includes a factory case and two extra choke tubes (cylinder and skeet). Barrel and stock measurements (U/O): bore diameter nine inches from the breech both proofed and measured at 10.4 mm (.410 inches); 1 7/16 inch drop at comb; 2 1/4 inch drop at heel; 14 3/8 inch length of pull; weight 7 lbs. 1 oz. Manufacturer: Caesar Guerini Model: Maxum BBL: 32 inch vent rib Stock: walnut Gauge: 410 Finish: blue/coin Serial Number157952 Class: Modern Long Gun

Lot: 345 - Beretta 20 Gauge Model 687 EELL King Ranch Edition Shotgun

Factory Bottega C. Giovanelli Signed and Engraved Beretta 20 Gauge Model 687 EELL Diamond Pigeon King Ranch Edition Over/Under Shotgun with Case Built with blued Excelsior steel monoblock barrels featuring a single bead sight on the matted flat vent rib, standard factory markings, a single band of engraving at the breech, 2007 dated Italian proof marks, interchangeable chokes (modified/full installed), and chambers marked 3 inches with ejectors. The barrels are fitted to the coin finished sideplated action which is shows engraving themed after the famous King Ranch in Texas. The engraving consists of scrollwork surrounding "P. BERETTA" banners on either side and a King Ranch brand on the underside, the King Ranch farm house on the right with a scene depicting a cattle drive, and the ranch house again on the left with a portrait of "Monkey" the bull, the foundation for the famed Santa Gertrudis breed of beef cattle. The engraving is signed "Bottega C. Giovanelli" on the triggerplate. The gun features a single gold trigger and a tang mounted automatic safety/selector. The gun is fitted with a beautifully figured and multi-point checkered Schnabel tip forend with engraved coin finished iron and release as well as a pistol grip stock with blank silver stock oval and a factory recoil pad. Includes a King Ranch branded Beretta takedown case containing three extra chokes (cylinder, improved cylinder, and improved modified). Barrel and stock measurements (U/O): bore diameter nine inches from the breech both proofed and measured at 15.9 mm (.626 inches); minimum wall thickness .030/.032 inches; 1 9/16 inch drop at comb; 2 1/8 inch drop at heel; 14 7/16 inch length of pull; weight 6 lbs. 5 oz. Manufacturer: Beretta Pietro Model: 687 EELL BBL: 28 inch vent rib Stock: walnut Gauge: 20 Finish: blue/coin Serial NumberKF0059 Class: Modern Long Gun

Lot: 346 - Factory Engraved and Gold Inlaid Ithaca Model 37S Shotgun

Attractive Factory Engraved and Gold Inlaid Ithaca Model 37S Slide Action Shotgun Two Barrel Set Inscribed to Dr. John F. Warren Manufactured in 1942. Built with a blued barrel featuring a bright finished Lyman Cutts Compensator hosting the front sight bead, a mid-bead on the matted flat vent rib, standard markings, chambers marked 2 3/4 inches, no choke marking which is proper for a factory installed Cutts, and 2 1/4 inch wedges of scroll engraving at the breech with a gold inlaid lightning bolt at the center of each. The blued receiver displays beautifully executed scroll engraving surrounding a pair of grouse flushing over the tree tops on the left and a pair of mallards taking flight from a pond on the right, with all of the birds relief inlaid in gold. The trigger guard is inlaid "DR. JOHN F. WARREN" in gold. While it cannot be confirmed, an extremely strong candidate for the Dr. John F. Warren in question is the one of Ithaca, NY, who is stated to have been an active sportsman and skeet shooter as well as a member of the Ithaca Gun Club and the Tompkins County Fish and Game Club in his May 14, 1951, obituary in "The Ithaca Journal". The gun is fitted with a beautifully figured and fancy fleur-de-lis checkered forend and straight grip stock with "JFW" in a stock shield and a factory rubber recoil pad. Includes an extra matching 26 inch barrel with choke marked "S" for skeet and matching engraving at the breech (without gold inlay). Stock measurements: 1 9/16 inch drop at comb; 2 5/16 inch drop at heel; 13 15/16 inch length of pull; weight 7 lbs. 4 oz. Manufacturer: Ithaca Gun Co Model: 37s BBL: 22 inch vent rib Stock: walnut Gauge: 12 Finish: blue/gold Serial Number80461 Class: Curio & Relic Long Gun

Lot: 347 - Factory Engraved and Gold Inlaid Ithaca Model 37 Shotgun

Factory Engraved and Gold Inlaid Ithaca Model 37 Slide Action Shotgun Manufactured in 1972. Built with a blued barrel featuring dual bead sights on the matted flat vent rib, standard factory markings, chamber marked 2 3/4 inches, and choke constriction of .029 inches (improved modified). The blued action is beautifully adorned with near full coverage ornamental scroll engraving encompassing a pair of relief gold inlaid mallards taking flight from a pond on the left and a pair of pheasant cocks, one standing, one flushing, on the right also in relief gold inlay. The underside of the action is marked with a small "37-3" stamped ahead of the loading/ejection port. The gun is fitted with a stunning highly figured and multi-point checkered forend and pistol grip stock with factory white-line grip cap and rubber recoil pad. Stock measurements: 1 1/2 inch drop at comb; 2 3/8 inch drop at heel; 14 inch length of pull; weight 7 lbs. 4 oz. Manufacturer: Ithaca Gun Co Model: 37 BBL: 30 inch vent rib Stock: walnut Gauge: 12 Finish: blue/gold Serial Number371232013 Class: Curio & Relic Long Gun

Lot: 348 - Engraved Remington 20 Gauge Model 17F Premier Grade Shotgun

Rare Factory Game Scene Engraved Remington 20 Gauge Model 17F Premier Grade Slide Action Shotgun These F Grade guns received the special attention of the custom shop and were entirely hand fitted by the hands of Remington's master gunsmiths and decorated with the finest engraving Remington could produce. The gun was built with a blued barrel featuring dual white bead sights on the matted flat solid rib, standard Remington markings encompassed by a wedge of beautifully executed floral scroll engraving, Remington 1928 date code on the underside along with a 1972 dated factory repair mark, choke marked full, and chamber measured 2 3/4 inches. The blued action displays gorgeous broad leafy scroll engraving surrounding vignette game scenes, a bust of a dog on the trigger guard, and hand cut model and serial number on the underside. The scenes depict a pair of pointing setters in the center scene with a grouse in the rear panel and a flushing quail in front all on the left and pointing pointers at the center with a pair of rabbits to the rear and a flushing snipe in the front on the right, all in fine detail. The gun is fitted with a beautifully figured and multi-point checkered forend and pistol grip stock with a factory hard rubber grip cap, a gold stock oval inscribed "E", and a Silver's type recoil pad. Stock measurements: 1 7/16 inch drop at comb; 2 7/16 inch drop at heel; 13 7/8 inch length of pull; weight 6 lbs. 1 oz. Manufacturer: Remington UMC Model: 17-F BBL: 30 inch solid rib Stock: walnut Gauge: 20 Finish: blue Serial Number46206. Class: Curio & Relic Long Gun

Lot: 349 - Engraved Remington Model 31TF Premier Trap Grade Shotgun

Rare Factory Engraved and Gold Inlaid Remington Model 31T-F Premier Trap Grade Slide Action Shotgun The T, or Trap, grade was built with serious competitors in mind, with each gun fitted by hand by the master gunsmiths at Remington while the F, or Premier grade was a work of art, embellished by Remington's master engravers, and this Model 31T-F is the best of both worlds. Built with a blued steel barrel featuring dual bead sights on the matted vent rib, wedges of foliate scroll at the breech entwined with the factory markings, 1934 date code on barrel along with a 1958 dated factory repair mark, and choke marked full. The blued action displays stunning near full coverage German oak leaf and acorn scroll engraving surrounding six highly detailed gold inlaid game scenes, hand cut model and serial number on the underside, and a gold inlaid bust of a dog on the trigger guard. The game scenes show flushing grouse, a pair of pointing setters, and a quail on the left side along with a pheasant cock, a pair of pointing pointers, and a woodcock on the right, all in their own panels. The gun has a beautifully figured and fancy checkered forend and pistol grip stock with oak leaf and acorn carving at the flats, factory grip cap, blank gold stock oval, and a Hawkins recoil pad. Stock measurements: 1 9/16 inch drop at comb; 2 1/16 inch drop at heel; 14 3/8 inch length of pull; weight 8 lbs. 3 oz. Manufacturer: Remington Arms Inc Model: 31-T BBL: 30 inch vent rib Stock: walnut Gauge: 12 Finish: blue/gold Serial Number10196 Class: Curio & Relic Long Gun

Lot: 350 - Engraved Remington Model 10E Expert Grade Slide Action Shotgun

Factory Engraved Remington Model 10E Expert Grade Slide Action Shotgun Manufactured between 1908 and 1920, the E, or Expert grade was one of the highest grades Remington produced. Built with a blued barrel featuring a single bead sight, beautiful wedges of Germanic scrollwork at the breech flanking the factory markings, 1950 dated Remington repair marking, and hand cut "FULL" choke marking. The blued action displays near full coverage Germanic scrollwork surrounding detailed panel scenes depicting a pointing setter and pointer on the left side and a pair of mallards taking flight on the right. The gun also shows a bust of a setter on the trigger guard as well as the hand cut serial number on the underside of the action and lower tang. The gun is fitted with a beautifully figured and fancy checkered forend and round semi-pistol grip stock with blank stock oval and a leather faced leather recoil pad. Stock measurements: 1 11/15 inch drop at comb; 2 15/16 inch drop at heel; 13 7/8 inch length of pull; weight 7 lbs. 13 oz. Manufacturer: Remington Arms Inc Model: 10 BBL: 30 inch round Stock: walnut Gauge: 12 Finish: blue Serial Number118730. Class: Curio & Relic Long Gun

Lot: 351 - Remington Model 17D Tournament Grade Shotgun with Extra Barrel

Very Scarce Factory Engraved Remington 20 Gauge Model 17D Tournament Grade Slide Action Shotgun with Extra Barrel Manufactured between 1921 and 1933 with a very small percentage receiving engraving from the factory like this wonderful example. Built with a blued barrel featuring a single bead sight, wedges of floral scroll engraving at the breech flanking the factory markings, 1928 Remington date code, and choke marked full. The blued action is adorned with beautifully executed broad ornamental scroll engraving on all sides with the hand cut serial number and model on the underside. The gun is fitted to the beautifully figured and multi-point checkered forend and pistol grip stock with factory grip cap and buttplate. Includes an extra unnumbered 28 inch barrel set proofed in 1928 with scroll engraving at breech, "MODEL 17.D." marking, and choke marked modified. Stock measurements: 1 7/16 inch drop at comb; 2 1/2 inch drop at heel; 13 13/16 inch length of pull; weight 5 lbs. 13 oz. Manufacturer: Remington UMC Model: 17 BBL: 28 inch round Stock: walnut Gauge: 20 Finish: blue Serial Number51720 Class: Curio & Relic Long Gun

Lot: 352 - Engraved Remington Model 31T-E Expert Trap Grade Shotgun

Scarce Factory Engraved Remington Model 31T-E Expert Trap Grade Slide Action Shotgun The T, or Trap grade was built with serious competitors in mind, with each gun fitted by hand by the master gunsmiths at Remington while the E, or Expert grade is a thing of beauty, embellished by Remington's master engravers, and this Model 31T-E is the best of both worlds. Built with a blued steel barrel featuring dual white bead sights on the matted vent rib, wedges of foliate scroll at the breech, factory markings, 1949 date code on barrel along with a 1950 dated factory repair mark, and choke marked full. The blued action displays beautifully executed foliate scroll engraving surrounding the hand cut model and serial number on the underside, a pointing pointer in a field on the left, and a pointing setter in a field on the right, both in fine detail. The gun has a beautifully figured and multi-point checkered forend and pistol grip stock with factory grip cap, blank gold stock oval, and a Hawkins recoil pad. Stock measurements: 1 1/2 inch drop at comb; 1 7/8 inch drop at heel; 13 1/2 inch length of pull; weight 7 lbs. 13 oz. Manufacturer: Remington Arms Inc Model: 31-T BBL: 30 inch vent rib Stock: walnut Gauge: 12 Finish: blue Serial Number110013 Class: Curio & Relic Long Gun

Lot: 353 - Parker Brothers A1-Special Upgrade Double Barrel Shotgun

Attractive Engraved and Gold Inlaid Parker Brothers A1-Special Upgrade Double Barrel Shotgun with Case Manufactured in 1913 as a VH Grade gun and subsequently highly embellished and transformed into the current A1-Special configuration. Blued steel barrels with a single bead sight on the matted concave solid rib which is marked "PARKER BROTHERS. MAKERS. MERIDEN. CONN. VULCAN STEEL", 1 7/8 inch wedges of floral scroll engraving at either breech, 1 1/2 inch wedges of scroll at either muzzle, and 2 1/2 inch chambers with a single extractor. The casehardened action displays fantastic triple bead carved fences as well as superb full coverage floral scroll engraving surrounding gold inlaid "Parker Bros." on the underside. The engraving continues onto the toplever, trigger guard, and both tangs tying together the decoration on the piece. The gun features a pair of triggers and a tang mounted automatic safety switch with gold inlaid "S" marking. The watertable is marked "A1-8" along with the factory markings. Exceptionally well-figured, fancy checkered forend with engraved iron and Deeley release as well as a pistol grip stock with checkered and fleur-de-lis carved flats, factory hard rubber grip cap, and blued and engraved skeleton buttplate surrounding a checkered bare butt. Includes an oak & leather case with reproduction Parker label and cleaning tools. Barrel and stock measurements (R/L): bore diameter nine inches from the breech .731/.731 inches; choke constriction .005/.026 inches; minimum wall thickness .028/.028 inches; 1 3/8 inch drop at comb; 2 inch drop at heel; 13 15/16 inch length of pull; weight 7 lbs. 6 oz. Manufacturer: Parker Bros Model: A1-S BBL: 28 inch solid rib Stock: walnut Gauge: 12 Finish: blue/casehardened/gold Serial Number163595 Class: Curio & Relic Long Gun

Lot: 354 - Parker Brothers GHE Grade Double Barrel Shotgun Two Barrel Set

Scarce Factory Engraved Parker Brothers GHE Grade Double Barrel Shotgun Two Barrel Set with Single Trigger and Case Manufactured in 1940 during the Remington era as one of only 808 total built in this combination of gauge, barrel length, and grade according to page 279 of "The Parker Story" by Gunther, Mullins, Parker, Price, and Cote, which also states that only some 67% of total production had ejectors. The gun has dual white bead sights on the matted vent rib, Remington date code on the flats, and chambers marked 2 3/4 inches with ejectors. The barrels are fitted to the casehardened size "1 1/2" action which features GH pattern engraving consisting of oval game bird scenes on the left, right, and underside along with "PARKER", all encompassed by highly attractive scrollwork. The trigger guard/lower tang is inlaid "ALEXIA WASLEFF" in gold and is numbered "241443" on the back side. The gun features a single selective trigger and tang mounted manual safety. The gun is fitted with a beautifully figured and multi-point checkered beavertail forend with lightly engraved case colored iron and release as well as a straight grip stock with Monte Carlo comb and a Pachmayr rubber recoil pad. Includes a second matching numbered 28 inch barrel set with its own beavertail forend and chokes marked modified/full as well as a wood and leather flat case with "ALEXIA WASLEFF" in the brass plaque on the lid. Alexia Wasleff is noted in period newspapers as a "Chicago industrialist" and "prominent sportsman", taking annual hunting trips to Cut Bank, MT, around the time this gun was made. Barrel measurements for the extra set (R/L): bore diameter nine inches from the breech .731/.731 inches; choke constriction .015/.032 inches; minimum wall thickness .030/.031 inches. Barrel and stock measurements (R/L): bore diameter nine inches from the breech .735/.734 inches; choke constriction .008/.007 inches; minimum wall thickness .027/.029 inches; 1 9/16 inch drop at comb; 1 11/16 inch drop at heel; 14 inch length of pull; weight 7 lbs. 11 oz. Manufacturer: Parker Bros Model: Ghe BBL: 28 inch vent rib Stock: walnut Gauge: 12 Finish: blue/casehardened Serial Number242006 Class: Curio & Relic Long Gun

Lot: 355 - Scarce Parker Brothers 28 Gauge VH Grade Double Barrel Shotgun

Scarce Parker Brothers 28 Gauge VH Grade Double Barrel Shotgun Manufactured in 1917 as one of only 772 manufactured in this configuration per the chart on page 258 of "The Parker Story" by Gunther, Mullins, Parker, Price, and Cote. The gun was built with blued steel barrels featuring a single bead sight on the matted concave solid rib which is marked "PARKER BROS. MAKERS. MERIDEN. CT. U.S.A. VULCAN. STEEL", and chambers measured 2 5/8 inches with extractor. The barrels are fitted to a blued size "00" boxlock action which displays zig-zag border engraving with "Parker Bros." on either side and features double triggers and a tang mounted automatic safety. The gun is fitted with a lightly figured and multi-point checkered splinter forend and a pistol grip stock with factory grip cap, blank stock shield, and dog's head buttplate. The above configuration is confirmed on page 475 of "Parker Gun Identification & Serialization" by Price and Fjestad. Barrel and stock measurements (R/L): bore diameter nine inches from the breech both .557 inches; choke constriction .010/.020 inches; minimum wall thickness .020/.018 inches; 1 7/16 inch drop at comb; 2 1/2 inch drop at heel; 14 1/4 inch length of pull; weight 5 lbs. 6 oz. Manufacturer: Parker Bros Model: VH BBL: 26 inch solid rib Stock: walnut Gauge: 28 Finish: blue Serial Number179480 Class: Curio & Relic Long Gun

Lot: 356 - Factory Engraved Parker Brothers DHE Grade Double Barrel Shotgun

Factory Engraved Parker Brothers DHE Grade Double Barrel Shotgun Blued steel barrels with dual white bead sights on the matted solid rib, chambers marked 3 inches with ejectors, chokes marked full/full, and a Remington 1940 date code on the flats. The casehardened size "1 1/2" boxlock action features standard DH Grade engraving consisting of floral scrollwork surrounding game scenes depicting a setter in a field on the right, a pointer in a field on the left, and a nide of pheasants on the underside along with "PARKER". The gun has a single trigger and an automatic safety. Beautifully figured and multi-point checkered splinter forend with engraved iron and release as well as a straight grip stock with carved drop points, blank stock oval, and a red NoShoc recoil pad. Stock measurements: 1 5/8 inch drop at comb; 2 1/2 inch drop at heel; 13 9/16 inch length of pull; weight 7 lbs. 11 oz. Manufacturer: Parker Bros Model: DHE BBL: 30 inch solid rib Stock: walnut Gauge: 12 Finish: blue/casehardened Serial Number241792 Class: Curio & Relic Long Gun

Lot: 357 - Kusmit Engraved Winchester .410 Model 21 Grand American Shotgun

Excellent and Rare Factory Nick Kusmit Master Engraved and Gold Inlaid Winchester .410 Bore Model 21 Grand American Double Barrel Shotgun with Kusmit Letter and Case Manufactured after 1960 during the custom shop era as one of just five .410 bore guns recorded as made during that era from 1960-1982 due to strict control of production by John Olin himself according to page 335 of Ned Schwing's "Winchester's Finest: The Model 21". The gun was built with blued Winchester Proof Steel barrels with a single nickeled steel bead sight on the matted concave solid rib, 3 inch wedges of floral scroll engraving at either breech, jewelled flats, chokes marked "MOD"/"FULL", and 3 inch chambers with automatic ejectors. The barrels are fitted to a blued action which displays the beautiful Grand American pattern engraving consisting of near full coverage floral scrollwork surrounding four gold inlaid game scenes. The left side shows a birdie dog in a field scene, the right has a pointer in a field scene, the underside shows a pair of pheasant cocks in a field scene, and a bust of a dog on the trigger guard all rendered in fine detail. The engraving bears a tiny "NK" signature beneath the pheasant cocks for famed Winchester Master Engraver Nick Kusmit. The gun features a gold single selective trigger, jeweled watertable with lightening cuts, and tang mounted manual safety with gold inlaid "SAFE" indicator. The gun is fitted with a highly attractive well-figured and fancy 21-B pattern fleur-de-lis checkered and carved beavertail forend with ebony tip inlay and matching engraved blued iron and rotary latch release as well as a pistol grip stock with engraved blued steel grip cap and a checkered butt. Includes a Winchester canvas and leather flat case containing a pair of brass snap caps, an oil bottle, an oiler, and two cans of Winchester "New Gun Oil". Also included is a notarized letter from Mr. Kusmit affirming that he in fact performed this fine engraving. Barrel and stock measurements (R/L): bore diameter nine inches from the breech .417/.416 inches; choke constriction .010/.019 inches; 1 5/16 inch drop at comb; 2 inch drop at heel; 14 7/16 inch length of pull; weight 7 lbs. 6 oz. Manufacturer: Winchester Model: 21 BBL: 28 inch solid rib Stock: walnut Gauge: 410 Finish: blue/gold Serial Number32155 Class: Curio & Relic Long Gun

Lot: 358 - P. Coggan Gold Inlaid Galazan/Connecticut Over/Under Shotgun

Exceptional Factory Phil Coggan Signed, Engraved, and Multi-Colored Deep Relief Gold Inlaid A. Galazan/Connecticut Shotgun Manufacturing Co. Pinless Sidelock Over/Under Shotgun Anthony Galazan, of Connecticut Shotgun Manufacturing Company (C.S.M.C.), has been producing exceptional guns in the United States for some 50 years, and many would say that he holds the title as the very finest maker in

Lot: 359 - Game Scene Engraved Winchester Model 42 Shotgun

Attractive Game Scene Engraved Winchester Model 42 Slide Action Shotgun Manufactured in 1954 and subsequently embellished by the hands of an unknown, and highly skilled, engraver. The gun has a blued Winchester Proof Steel barrel featuring white front and steel mid-bead sights on the matted vent rib, wedges of scroll at the muzzle, 1 1/2 inch wedges of scroll engraving on either side at the breech, standard markings, chamber marked 3 inches, and choke marked "SKEET". The receiver extension also shows light scrollwork along with an engraved pigeon on the magazine tube. The barrel is fitted to the blued receiver which features the classic Winchester 12-5 factory pattern game scenes on either side consisting of two pointers in a field flushing a pair of quail on the left side and a retriever pointing two quail in a field on the right side, with both scenes bordered with Germanic scroll engraving with punch-dot backgrounds. The gun is fitted with a highly figured and "B" pattern fleur-de-lis checkered and carved extended forend as well as a pistol grip stock an engraved blued steel grip cap and checkered black factory buttplate. Stock measurements: 1 9/16 inch drop at comb; 1 7/8 inch drop at heel; 14 3/8 inch length of pull; weight 6 lbs. 7 oz. Manufacturer: Winchester Model: 42 BBL: 28 inch vent rib Stock: walnut Gauge: 410 Finish: blue Serial Number137252 Class: Curio & Relic Long Gun

Lot: 360 - S.B. Williams Engraved Winchester Model 21 Double Barrel Shotgun

Attractive S. B. Williams Signed, Master Engraved Exhibition Quality Gold Inlaid Winchester Model 21 Tournament Double Barrel Shotgun with Case Built prior to World War II and subsequently masterfully embellished to its current configuration with blued Winchester Proof Steel barrels featuring dual bead sights on the matted concave solid rib, standard Winchester markings, 3 inch wedges of engraving at either breech backed by dual gold inlaid bands, chokes marked "WS-1"/"WS-2", and 2 3/4 inch chambers with automatic ejectors. The barrels are mated to a blued action with near full coverage floral scroll engraving over a matted background surrounding "TOURNAMENT" inlaid in gold on the triggerplate along with a number of fleur-de-lis and scrolls all encompassed by gold inlaid line borders. The gun features a single selective trigger signed "ENGR" and "S.B.Williams" on either side, and a tang mounted automatic safety. The gun is mounted with a beautiful highly figured and fancy fleur-de-lis checkered beavertail forend with matching engraved and gold inlaid fitting and a straight grip stock with a checkered bare butt. Included is a wood and leather takedown case, a pair of snap caps, and a nickel oiler. Barrel and stock measurements (R/L): bore diameter nine inches from the breech .729/.730 inches; choke constriction .003(jug)/.009 inches; minimum wall thickness .032/.029 inches; 1 5/16 inch drop at comb; 1 3/4 inch drop at heel; 14 1/8 inch length of pull; weight 7 lbs. 7 oz. Manufacturer: Winchester Model: 21 BBL: 26 inch solid rib Stock: walnut Gauge: 12 Finish: blue/gold Serial Number3624 Class: Curio & Relic Long Gun

Lot: 361 - Cargnel Signed Marilyn Monroe Engraved Winchester Mod 21 Shotgun

Attractive Gino Cargnel Signed, Marilyn Monroe Themed Master Engraved, and Gold Inlaid Winchester Model 21 Double Barrel Shotgun Manufactured between 1945 and 1960 and subsequently embellished by Master Engraver Gino Cargnel. The gun has blue Winchester Proof Steel barrels featuring dual bead sights on the matted concave solid rib, wedges of Germanic scroll engraving at the breech with multi-color gold inlaid bouquets, gold bands and engraving at the muzzles, jewelled flats, chokes marked full/full, and chambers marked 2 3/4 inches with ejectors. The barrels are fitted to the handsomely scalloped blued action which displays near full coverage Germanic scrollwork with gold inlaid borders and interspersed with multi-color gold inlaid bouquets; two on either side, one on the trigger guard with a heart, on the toplever, and in a frame around a multi-color gold inlaid likeness of Marilyn Monroe's famous "Flying Skirt" photo. Born Norma Jeane Mortenson in Los Angeles, CA, in 1926, she adopted the name Marilyn Monroe in 1946 as a stage name as a budding actress with 20th Century Fox. Monroe would go on to become America's heartthrob, helping to define American culture in the 1950s along with other icons of the day like Elvis Presley, Marlon Brando, and the American "hot rod". Monroe ended the 1950s as the highest billed actress of the decade and forever cemented herself as a defining symbol of her era. The engraving is signed "G. CARGNEL" in a banner beneath the scene along with the Winchester "TRAP" marking. The gun features a single trigger and a tang mounted manual safety with gold inlaid "SAFE" indicator below the serial number, also in gold. The gun is fitted with a beautifully figured and multi-panel checkered beavertail forend with blued engraved and multi-color gold inlaid iron and release. The pistol grip stock is magnificently flame figured and features multi-point checkering and a Winchester recoil pad. Includes a letter from Griswell's Fine Arms stating that this gun was commissioned by director John Millus when he was working on a Marilyn Monroe film that never came to be. Barrel and stock measurements (R/L): bore diameter nine inches from the breech .732/.731 inches; choke constriction .033/.033 inches; minimum wall thickness .029/.029 inches; 1 1/4 inch drop at comb; 2 inch drop at heel; 14 1/2 inch length of pull; weight 7 lbs. 12 oz. Manufacturer: Winchester Model: 21 BBL: 32 inch solid rib Stock: walnut Gauge: 12 Finish: blue/multi-colored gold Serial Number17720 Class: Curio & Relic Long Gun

Lot: 362 - H. Roos Engraved Ruger No 1 International Rifle with Zeiss Scope

Heidi Roos Signed, Engraved, and Gold Inlaid Ruger No. 1 International Single Shot Rifle with Zeiss Scope Manufactured in 2016 and subsequently embellished by the artists at Baron Engraving in Milford, CT. The stainless steel barrel features a beaded blade fore sight on a ramped banded base, a rear quarter rib hosting a flip-up rear sight and engraved factory scope rings holding a Zeiss Conquest HD5 3-15x42 mm scope, and standard Ruger markings. The barrel is fitted to the stainless action which displays extensive Germanic scroll engraving over a matted background with a bighorn ram bust inlaid in gold on the left side and a full body ram inlaid in gold on the right, both surrounded by braided borders. There is a small signature beneath the ram bust that reads "HROOS" for Baron engraver Heidi Roos. The logo of the USA Shooting Team is engraved on the underside of the action with "RUGER/No. 1" on the top. The rifle is fitted with a nicely figured and multi-point checkered factory full length forend with stainless grip cap and blue sling swivel as well as a pistol grip stock with stainless Ruger grip cap, rear sling stud, and a Ruger recoil pad. Manufacturer: Ruger Model: No. 1 BBL: 20 inch round Stock: walnut Gauge: 308 Winchester Finish: stainless/gold Serial Number134-47181 Class: Modern Long Gun

Lot: 363 - Gold Plated Engraved Ruger No. 1 Rifle with Zeiss Scope

Gold Plated and Game Scene Engraved Ruger No. 1 International Single Shot Rifle with Zeiss Scope Manufactured in 2016 and subsequently embellished by the artists at Baron Engraving in Milford, CT. The blued steel barrel features a beaded blade fore sight on a ramped banded base, a rear quarter rib hosting a flip-up rear sight and engraved gold plated factory scope rings holding a Zeiss Conquest HD5 3-15x42 mm scope, and standard Ruger markings. The barrel is fitted to the gold plated action which displays near full coverage floral scroll engraving with matting in the background surrounding a bighorn ram bust on the right side and a full body ram on the left. The logo on the USA Shooting Team is engraved on the underside of the action with "RUGER/No. 1" on the top. The rifle is fitted with a nicely figured and multi-point checkered factory full length forend with gold plated grip cap and sling swivel as well as a pistol grip stock with blued Ruger grip cap, rear sling stud, and a Ruger recoil pad. Manufacturer: Ruger Model: No. 1 BBL: 20 inch round Stock: walnut Gauge: 257 Roberts Finish: blue/gold Serial Number134-41099 Class: Modern Long Gun

Lot: 364 - G. Simillion/Winchester Model 70 Dangerous Game Rifle 416 Taylor

Gold Inlaid Gene Simillion/Winchester Model 70 Bolt Action Dangerous Game Rifle in .416 Taylor with Scope This rifle was built in 1992 by the legendary American master gunmaker Gene Simillion. The rifle has a satin blued steel barrel featuring a white beaded blade fore sight on a stippled ramped island base, stippled rear quarter rib hosting a single standing leaf sight with white triangle inlay as well as "400 gr/@ 50 yds" and "416 TAYLOR" markings the latter in gold inlay), a front barrel band sling stud, and "G. SIMILLION GUMAKER" ahead of the rib. The barrel also features dual gold inlaid bands of gold at both the muzzle and the breech. The barrel is fitted to the satin blued 1948 production Winchester Model 70 with cloverleaf tang, "WINCHESTER 101172" engraved on the top edge of the action wall, a three-position safety, built-up and checkered bolt release, jewelled bolt body, five-panel checkering on the bolt knob along with a panel of floral engraving, a gold inlay with engraved flower on the firing pin sleeve, and a set of Simillion's quick detach scope bases and rings holding a Leupold Vari-X III 1.5-5x20 mm scope. The two-piece replacement bottom metal has a straddle floorplate and rolled edge inside-the-bow release trigger guard with lock are also satin blue and have engraved bolt heads. The rifle is fitted in a beautifully figured pistol grip stock featuring Simillion's classic wrap around multi-point checkering, an ebony tip, dual engraved recoil crossbolts, extra quick detach sight blade and filler in the engraved satin blue trapdoor grip cap, a shadowline cheekpiece, "C/C/E" in the gold stock oval, inletted rear sling swivel on raised pedestal, and a leather covered recoil pad. Includes with the rifle is a set of RCBS leading dies for .416 Taylor and an extra Limb Saver recoil pad. Manufacturer: Winchester Model: 70 BBL: 24 inch round Stock: walnut Gauge: 416 Taylor Finish: blue/gold Serial Number101172 Class: Modern Long Gun

Lot: 365 - Theis Engraved Dakota Houston Safari Club Model 76 Rifle

Terry Theis Signed, Master Engraved, and Gold Inlaid Wayne Baker/Dakota Houston Safari Club Model 76 Bolt Action Dangerous Game Rifle in .416 Rigby with Zeiss Scope Manufactured c. 1991. Built with a blued steel barrel featuring a beaded blade fore sight with flip-up moon bead on an engraved banded ramp base, an engraved barrel band sling stud, an engraved quarter rib hosting the fixed rear sight with a platinum centerline, "Wayne Baker - Gunmaker" and "Legend Outfitters - Houston Tx" marked on the left and right respectively, and wedges of Germanic Arabesque scroll engraving at the breech. The barrel is fitted to the blued controlled round feed action with a jewelled bolt, nitre blued follower, and scroll engraving surrounding a relief gold inlaid cape buffalo bull on the left side of the front receiver ring and a bust of a lion opposite it. The action is fitted with a Zeiss Diavari-C 1.5-4.5x18 mm scope in a set of engraved Warne quick detach rings and shows an import mark. The straddle floorplate and inside-the-bow release trigger guard are engraved with the same scrollwork with gold inlaid borders, a relief gold inlaid charging bull elephant on the floorplate, and gold "HOUSTON/SAFARI/CLUB" and "1991". The rifle is signed "TTHEIS" on the floorplate and the right action wall's top edge for Master Engraver Terry Theis. The rifle is fitted with an attractively figured and multi-point checkered pistol grip stock with ebony forend tip, dual ebony capped recoil bolts, an engraved and gold inlaid blued trapdoor grip cap with extra fore sight blade, shadowline cheekpiece, inletted blued sling swivel, and a Decelerator recoil pad. Includes an aluminum case. Manufacturer: Dakota Arms Inc Model: 76-Rifle BBL: 24 inch round Stock: walnut Gauge: 416 Rigby Finish: blue/gold Serial NumberR0070 Class: Modern Long Gun

Lot: 366 - Engraved Kleingunther K-15 Bolt Action Rifle with Carved Stock

Factory Engraved and Gold Inlaid Kleingunther K-15 Insta-Fire Bolt Action Rifle with Carved Stock Manufactured c. 1982, these K-15 rifles were said to be the most accurate hunting rifles in the world, leaving the factory with a 1/2 MOA guarantee with a 3 shot group at 100 yards as well as the fastest lock-time. The rifle is built with a blued steel barrel with no provisions for open sight and "MOD K15" and "CAL 7MM REM MAG" markings on the left side opposite "VOERE VOEHRENBACH MADE IN GERMANY" on the right. The barrel is fitted to the blued action which is fitted with a two-position side-safety and a set of Buehler swing mount bases and displays highly attractive Germanic scroll engraving surrounding the serial number on the right and "KLEINGUENTHER, SEGUIN/TEX" on the left side. The trigger guard and magazine floorplate are engraved with matching scroll and also feature gold inlaid borders and a coin finished scene depicting a moose at the center of the floorplate. The rifle is fitted with a beautifully AAA fancy figured high luster pistol grip stock with deep relief number 16 style carved oak leaves at the forend and wrist, an ebony tip, sling swivels, a blued grip cap with scroll and gold inlaid borders around a coin white-tailed deer scene, right hand palm swell, and a Pachmayr Old English recoil pad. Includes the original order sheet and an article on the K-15 by Hal Swigget from "Gun World". Manufacturer: Voere Model: K15 BBL: 24 inch round Stock: walnut Gauge: 7mm Remington Magnum Finish: blue/coin/gold Serial Number852214 Class: Modern Long Gun

Lot: 367 - Sauer/Weatherby Europa Deluxe Bolt Action Rifle with Zeiss Scope

Factory Engraved and Gold Inlaid Sauer/Weatherby Europa Deluxe Bolt Action Rifle with Zeiss Scope Manufactured from 1959 to 1974 for the European market. Built with a blued steel light tapered barrel featuring a beaded blade fore sight on a banded ramp base, a fixed express rear sight on an engraved island base, barrel band sling swivel, dual engraved front claw bases (one original, one added) on the Nock's form over the chamber, and scroll engraving at the breech. The barrel is fitted to the near full coverage scroll engraved coin finished action showing factory markings, an import mark, a knurled bolt handle, and engraved blue bolt shroud with gold inlaid monogram. The trigger guard and hinged floorplate also show scroll engraving with a relief gold inlaid roaring stag at the center of the plate. The rifle features double set triggers. The rifle is fitted with a nicely figured pistol grip stock featuring contrasting forend tip and grip cap, skip-line multi-point checkering, a Monte-Carlo cheekpiece, rear sling swivel, and a Schaftkappe recoil pad. Includes a Zeiss Diavari-D 2.5-10x56 mm scope fitted in the claw mounts. Manufacturer: Sauer J P & Son Model: Weatherby Europa BBL: 24 inch round Stock: walnut Gauge: 300 Weatherby Magnum Finish: blue/coin Serial NumberP6208 Class: Curio & Relic Long Gun

Lot: 368 - Factory C. Baerten Engraved Browning Grade II Trombone Rifle

Factory Claude Baerten Signed and Game Scene Engraved Browning Grade II Trombone Slide Action Rifle with Factory Certificate, Case, and Box Manufactured c. 1996, with the included matching hand numbered and November 27, 1996, dated Browning S.A. factory certificate of identification ("No. 18198") listing the rifle's configuration including the caliber, model, Grade II engraving performed by "B. Romainville" (likely in error), and assembly by B. Cajot. Featuring FN factory Grade II engraving on the coin receiver consisting of game scene panels of a pair of gophers on the left side and a jumping squirrel on the right side, along with detailed backgrounds and floral pattern bordering. The work is signed "C. BAERTEN" on the lower left side for FN engraver Claude Baerten. It has fixed bladed blade and slide adjustable notch rear sights on the blued barrel, standard markings and proof marks, and a gold washed trigger. Fitted with a highly figured and sealed ribbed walnut slide and a multi-point checkered walnut semi-pistol grip stock with smooth metal buttplate. Also includes the original Browning box and a Browning case. Manufacturer: Fabrique Nationale Model: Trombone BBL: 22 inch round Stock: walnut Gauge: 22 S/L/LR Finish: coin/blue/gold Serial Number166CS01510 Class: Modern Long Gun

Lot: 369 - Factory P. Lallemand Engraved Browning Trombone Rifle

Limited Edition 1 of 100 Factory Pierre Lallemand Signed and Engraved Browning Trombone Slide Action Rifle with Box Manufactured c. 1990s-2000s as a limited edition of 100 with this example being the 90th of the series. It features factory oak leaf and acorn engraving on top of the receiver and bordering around game scene panels on either side, consisting of a pair of squirrels in a tree on the left and a single squirrel in a tree on the right, with the work singed "P.LALLEMAND" on the lower left side of the receiver for FN engraver Pierre Lallemand. It has fixed blade front and slide adjustable notch rear sights, standard FN factory markings and Belgian proof marks, along with "90/100" within an acorn on the right of the slide body. Fitted with a sealed and ribbed forend and a multi-point checkered stock with smooth metal buttplate. Includes the original box. Manufacturer: Fabrique Nationale Model: Trombone BBL: 22 inch round Stock: walnut Gauge: 22 Long Rifle Finish: blue Serial Number166CSWW090 Class: Modern Long Gun

Lot: 370 - Engraved Belgian Browning Grade II .22 Auto Rifle with Case

Factory Engraved Belgian Browning Grade II .22 Auto Semi-Automatic Rifle with Scope and Case Manufactured in 1971. Features a fixed brass-beaded blade front sight, a barrel mounted Weaver rail base fitted off with a Browning 4x scope, standard factory markings, a gold washed trigger, and a French grey action factory embellished with Grade II engraving consisting of a pair of squirrels on the right side, a pair of prairie dogs on the left side, and a duck taking flight on top, surrounded by floral scroll patterns and bordering. Fitted with a nicely figured and multi-point checkered forend and pistol grip stock with serrated blued steel buttplate. Includes a Browning Airways Naugahyde case. Manufacturer: Fabrique Nationale Model: Auto 22 BBL: 19 3/8 inch round Stock: walnut Gauge: 22 Long Rifle Finish: blue/French grey Serial Number71T55112 Class: Curio & Relic Long Gun

Lot: 371 - Risack Engraved Browning Pointer Grade Superposed Shotgun

Factory Raymond Risack Signed and Engraved Belgian Browning 20 Gauge Pointer Grade Superposed Shotgun with Desirable Tolex Case Manufactured in 1960. Built with blued Special Steel barrels featuring a single bead sight on the matted flat vent rib, standard markings, "**-"/"**" (improved cylinder/modified) chokes, and chambers marked 3 inches with ejectors. The barrels are fitted to the French grey finished action which displays attractive floral scroll engraving surrounding four individual game scenes consisting of a retriever holding a mallard in its mouth in a pond scene on the left, a pointer grasping a pheasant in a field on the right, a pair of bedded quail on the underside, and a pair of pheasants on the trigger guard. The gun is signed "R.RISACK" on both sides beneath the scene for renowned FN engraver Raymond Risack. The gun features a single trigger and tang mounted safety/selector with gold inlaid "O", "U", and "S". The gun is fitted with a beautifully figured and multi-point checkered forend with engraved iron and round knob semi-pistol grip long tang stock with added Browning recoil pad. Includes a highly desirable Browning Tolex case. Barrel and stock measurements (U/O): bore diameter nine inches from the breech .611/.614 inches; choke constriction .004/.007 inches; minimum wall thickness .032/.034 inches; 1 5/16 inch drop at comb; 1 15/16 inch drop at heel; 14 inch length of pull; weight 6 lbs. 1 oz. Manufacturer: Fabrique Nationale Model: Superposed BBL: 26 1/2 inch vent rib Stock: walnut Gauge: 20 Finish: blue/French grey Serial Number20610 Class: Curio & Relic Long Gun

Lot: 372 - Browning .410 Bore Pigeon Grade Lightning Superposed Shotgun

Highly Desirable Factory Engraved Belgian Browning .410 Bore Pigeon Grade Lightning Superposed Shotgun Manufactured in 1967. Built with blued Special Steel barrels featuring a single bead sight on the matted vent rib, chokes marked "**-"/"**" (improved cylinder/modified), and chambers marked 3 inches with ejectors. The barrels are fitted to the French grey finished action which shows classic Pigeon Grade near full coverage floral scroll engraving surrounding scenes of pigeons in flight on both the left and the right sides with bouquets of flowers on the underside and acanthus leaves carved on the fence and barrel wings. The gun features a gold single trigger and tang mounted manual safety/selector with gold inlaid "O", "U", and "S" indicators. The gun is fitted with a beautifully figured and multi-point checkered Lightning forend with engraved iron and short tang round knob pistol grip stock with factory buttplate. Barrel and stock measurements (U/O): bore diameter nine inches from the breech .407/.406 inches; choke constriction .008/.012 inches; 1 1/2 inch drop at comb; 2 1/8 inch drop at heel; 14 inch length of pull; weight 6 lbs. 11 oz. Manufacturer: Fabrique Nationale Model: Superposed BBL: 26 3/8 inch vent rib Stock: walnut Gauge: 410 Finish: blue/French grey Serial Number1851J7 Class: Curio & Relic Long Gun

Lot: 373 - Lewancyk and Deprez Engraved Browning Diana Grade Superposed

Factory J. Lewancyk and J. M. Deprez Signed and Game Scene Engraved Belgian Browning Diana Grade Superposed Broadway Trap Shotgun Manufactured in 1971. Built with blued Special Steel barrels featuring dual white bead sights on the matted Broadway trap rib, light engraving at the upper breech, chokes marked "*-"/"*" (improved modified/full), and chambers marked 2 3/4 inches with ejectors. The barrels are fitted to the French grey finished action which is engraved in the Diana Grade pattern with flowing scroll designs surrounding four game scenes depicting a flock of mallards in a marsh on the right, a nide of pheasants in a wooded scene on the left, a pair of quail on the underside, and a pair of rabbits on the trigger guard all in fine detail with matted backgrounds creating contrast. The engraving is signed "J.LEWANCYK" on both sides below the scenes and "J.M.DEPREZ" on the left side at the rear for FN engravers Jules Lewancyk and Jean-Marie Deprez. The gun features a single gold trigger and a tang mounted safety/selector with gold inlaid "S", "O", and "U" indicators. The gun is fitted with a stunning feather crotch figured and multi-point checkered beavertail forend with engraved French grey iron and release as well as a short tang flat knob pistol grip stock with Monte-Carlo comb and factory Browning recoil pad. Includes a Negrini takedown case. Barrel and stock measurements (U/O): bore diameter nine inches from the breech .722/.725 inches; choke constriction .025/.036 inches; minimum wall thickness .039/.038 inches; 1 3/8 inch drop at comb; 1 1/2 inch drop at heel; 14 3/8 inch length of pull; weight 8 lbs. 7 oz. Manufacturer: Fabrique Nationale Model: Superposed BBL: 32 inch vent rib Stock: walnut Gauge: 12 Finish: blue/French grey Serial Number35779S71 Class: Curio & Relic Long Gun

Lot: 374 - Watrin Engraved Browning Pointer Grade Superposed and Tolex Case

Factory Nelly Watrin Signed and Master Engraved Belgian Browning Pointer Grade Superposed Shotgun with Desirable Tolex Case and Factory Letter The included factory letter confirms the Pointer Grade configuration, 12 gauge, 28 inch barrels, and chokes when it was shipped to famed retailer Abercrombie & Fitch of New York, NY, on November 24, 1961. Built with blued Special Steel barrels featuring a single bead sight on the matted flat vent rib, standard markings, "**"/"*" (modified/full) chokes, and chambers marked 2 3/4 inches with ejectors. The barrels are fitted to the French grey finished action which displays attractive floral scroll engraving surrounding four individual game scenes consisting of a retriever holding a mallard in its mouth in a pond scene on the left, a pointer grasping a pheasant in a field on the right, a pair of bedded quail on the underside, and a pair of pheasants on the trigger guard bow. The gun is signed "N.WATRIN" on both sides beneath the scene for renowned FN Master Engraver Nelly Watrin. The gun features a single trigger and tang mounted safety/selector with gold inlaid "O", "U", and "S". The gun is fitted with a beautifully figured and multi-point checkered Lightning forend with engraved iron and round knob semi-pistol grip long tang stock with Browning buttplate. Includes a highly desirable Browning Tolex case. Barrel and stock measurements (U/O): bore diameter nine inches from the breech .730/.736 inches; choke constriction .021/.039 inches; minimum wall thickness .031/.026 inches; 1 1/2 inch drop at comb; 2 1/4 inch drop at heel; 14 3/8 inch length of pull; weight 7 lbs. 7 oz. Manufacturer: Fabrique Nationale Model: Superposed BBL: 28 inch vent rib Stock: walnut Gauge: 12 Finish: blue/French grey Serial Number87804 Class: Curio & Relic Long Gun

Lot: 375 - Browning 20 Ga. Grade I Field Superposed Shotgun with Tolex Case

Factory Engraved Belgian Browning 20 Gauge Grade I Field Superposed Shotgun with Highly Desirable Tolex Case Manufactured in 1958. Built with blued Special Steel barrels featuring a single bead sight on the matted flat solid rib, standard markings, chokes marked "**"/"*" (modified/full), and chambers marked 3 inches with ejectors. The barrels are fitted to the blued action which displays classic Grade I elegant scroll engraving and features a single gold trigger and a tang mounted safety/selector. The gun is fitted with a nicely figured and multi-point checkered field forend with blued iron and long tang round knob pistol grip stock with factory buttplate. Includes a highly desirable Browning Tolex takedown case with blue lining. Stock measurements: 1 9/16 inch drop at comb; 2 1/4 inch drop at heel; 14 5/16 inch length of pull; weight 6 lbs. 8 oz. Manufacturer: Fabrique Nationale Model: Superposed BBL: 28 inch solid rib Stock: walnut Gauge: 20 Finish: blue Serial Number12829 Class: Curio & Relic Long Gun

Lot: 376 - Capece and Poes Engraved Browning B25 B2G Superposed Shotgun

Factory Capece and Poes Signed and Game Scene Engraved Belgian Browning B25 B2G Grade Superposed Shotgun with Case Manufactured in 1980. Built with blued Special Steel barrels with dual white bead sights on the wide matted vent rib, standard markings, engraving on the barrel wings, added sling swivel, chokes marked "**"/"*" (modified/full), and chambers marked 2 3/4 inches with ejectors. The barrels are fitted to the coin finished action which displays Arabesque scroll engraving surrounding pair of flushing pheasant cocks on the left side and a pair of lighting mallards on the right, both in their native settings. The engraving is signed "R.CAPECE" and "A.POES" on the left side of the action for FN factory engravers Rocco Capece and Augusta Poes. The gun features a single checkered gold trigger and a tang mounted manual safety/selector with gold "U", "O", and "S" indicators. The gun is fitted with a beautifully figured and multi-point checkered Schnabel tip forend with engraved iron as well as a long tang flat knob pistol grip stock with rear sling swivel and an added rubber recoil pad. Includes a wood and leather flat case. Barrel and stock measurements (U/O): bore diameter nine inches from the breech .726/.727 inches; choke constriction .015/.030 inches; minimum wall thickness .035/.032 inches; 1 1/2 inch drop at comb; 2 1/2 inch drop at heel; 14 7/8 inch length of pull; weight 7 lbs. 8 oz. Manufacturer: Fabrique Nationale Model: Superposed BBL: 30 inch vent rib Stock: walnut Gauge: 12 Finish: blue/coin Serial Number8J3PM02771 Class: Modern Long Gun

Lot: 377 - RIAC Exclusive Bligh "The Meteorite" Celestial 1911 Pistol

Spectacular Rock Island Auction Exclusive Bligh Guns "The Meteorite" Celestial Edition Serial Number "M001" Model 1911 Semi-Automatic Pistol with Maple Case and Certificate There are firearms built to perform. There are firearms built to collect. And then there are firearms that exist as singular artifacts - objects that blur the line between mechanical engineering, metallurgy, sculpture, and

Lot: 378 - Randall Model 12 Sasquatch Bowie Knife with Sheath

Randall/Doug Kenefick Exclusive Model 12 Large Sasquatch Bowie Knife with Sheath 16 1/2 inches overall, with a 10 7/8 inch carbon steel recurve blade of 1/4 inch stock marked "#810" near the Randall address on the left side, brass hilt and domed butt with exposed nut, and a stacked leather handle with black spacers. Included with the knife is a brown leather Randall Model "A" sheath stamped "11" and signed "Doug/Kenefick" on the back, sharpening stone, and a blade sleeve. Manufacturer: None Model: None Class: Other

Lot: 379 - Randall Model 14-7 Attack Knife with Sheath

Randall Model 14-7 Attack Knife with Sheath 12 1/4 inches overall, with a 7 1/2 inch stainless steel straight clip blade of 1/4 inch stock with thumb notches on the spine, nickel silver hilt, green micarta "border patrol" grip and aluminum lined wrist thong hole with green paracord lanyard. Includes a custom vintage brown leather Model "C" sheath with canteen snap, brass rivets, paracord tie-downs and a sharpening stone. Manufacturer: None Model: None Class: Other

Lot: 380 - Randall Model 14-7 CDT Attack Knife with Sheath

Randall Model 14-7 CDT Attack Knife with Desirable Stag Grip and Sheath 12 1/2 inches overall, with a 7 5/8 inch stainless steel straight clip blade of 1/4 inch stock, brass hilt, red/white/blue spacers, stag finger groove grip cut down tang, and a brass line wrist thong hole paracord lanyard. Includes a brown leather Randall Model "C" sheath with paracord tie-downs and a sharpening stone Manufacturer: None Model: None Class: Other

Lot: 381 - Randall Model 25-5 Trapper Knife with Sheath

Randall Model 25-5 Trapper Knife with Sheath 9 1/2 inches overall with a 5 stainless steel drop point blade of 1/4 inch stock with thumb notches in front of the nickel silver hilt, Duralumin butt, and a three-piece stag and stacked leather "Trapper" handle with black and aluminum spacers. Includes a brown leather Randall Model "F" sheath with sharpening stone, cardboard blade sleeve, and instruction sheet. Manufacturer: None Model: None Class: Other

Lot: 382 - Randall Model 11-4.5 Alaskan Skinner Knife with Sheath

Randall Model 11-4.5 Alaskan Skinner Knife with Desirable "Amber" Stag Grip and Sheath 9 inches overall with a 4 1/2 drop point stainless steel blade of 1/4 inch stock with thumb notches, brass hilt and buttplate, red/white/blue spacers, and a finger grooved Amber stag grip. Included with the knife is a brown leather "11 45" marked Randall Model "A" sheath, sharpening stone, and instruction sheet. Manufacturer: None Model: None Class: Other

Lot: 383 - Randall Denmark Special Knife with Stag Grip and Sheath

Randall Denmark Special Knife with Desirable Stag Grip and Sheath 9 inches overall, with a 4 1/2 inch stainless steel blade of 3/16 inch stock, brass hilt, brass and black spacers, and a stag handle. Includes a brown leather "DS" marked Randall sheath. Manufacturer: None Model: None Class: Other

Lot: 384 - Bob Loveless Smith & Wesson Model 19-2 Revolver with Letter

Documented Robert W. "Bob" Loveless Special Ordered 5 Inch Barrel, Nickel Plated Smith & Wesson Model 19-2 Double Action Revolver with Factory Letter and Invoice Copy Manufactured in 1965, the included factory letter confirms this revolvers configuration, with a rare 5 inch barrel equipped with a red insert front sight, a white outline rear sight, target hammer, target trigger, nickel finish, and checkered goncalo alves target grips when shipped on August 16, 1965, to Gil Hebard Guns Inc. in Knoxville, Illinois. The letter further notes that this revolver was specifically built for the famous knife maker Robert W. "Bob" Loveless (1929-2010). Also included is a copy of a Smith & Wesson invoice that confirms the shipment date, ship to address, the revolver's configuration and serial number, along with "SPEC ORDER FOR BOB LOVELESS/LAWNDALE CALIF." Features fixed red ramped blade front and adjustable white outline notch rear sights, the caliber designation on the right side of the barrel, along with the four-line Smith & Wesson address and trade mark on the right of the frame. Matching full serial numbers visible on the frame, ejector, and butt. Matching assembly numbers on the grip frame and crane, along with the cylinder and ejector. Fitted with a pair of goncalo alves checkered target grips with Smith & Wesson medallion inserts. Manufacturer: Smith & Wesson Model: 19-2 BBL: 5 1/8 inch solid rib Gauge: 357 Magnum Finish: nickel Grips: goncalo alves Serial NumberK594899 Class: Curio & Relic Handgun

Lot: 385 - Robert W. "Bob" Loveless Drop Point Hunter Knife with Sheath

Highly Desirable Robert W. "Bob" Loveless Drop Point Hunter Knife with Sheath and Roy Jinks Letter Though there have been many incredibly talented and innovative knife makers throughout the history of the United States, there is perhaps one name that stands a bit taller than the rest and that is Robert W. "Bob" Loveless. Having begun his knife making career in the 1950s, first selling knives through Abercrombie & Fitch, Loveless went on to become one of the most innovative and respected knife makers this country has ever produced. An included letter from renowned Smith & Wesson historian Roy Jinks states that this knife, listed by serial number, was made for him by Loveless as a thank you for Jinks providing parts and technical drawings for the Smith & Wesson Model 41. Loveless produced multiple modified versions of the Model 41, so such parts and drawings would have been very useful to him. Jinks notes that he carried this particular knife on multiple hunts in Maine and Alaska. It measures 8 1/4 inches overall with a 3 3/4 inch drop point blade with the maker's mark on the left near the spine and "842" on the left ricasso, German silver guard, stag grip scales, and a lanyard hole near the pommel. Includes a Loveless marked leather sheath hand numbered to the knife in ink on the back. Manufacturer: None Model: None Class: Other

Lot: 386 - Cased R. Strosin Engraved Smith & Wesson Model 28-2 Revolver

Spectacular Cased Robert E. Strosin Signed, Master Relief Engraved, and Gold Inlaid Smith & Wesson Model 28-2 Highway Patrolman Double Action Revolver with Accessories Manufactured c. 1969-1972, and subsequently elaborately embellished by Master Engraver Robert E. Strosin, a former president of the Firearms Engravers Guild of America (FEGA) and active in the craft since 1978. Features intricate and extensive floral scroll pattern engraving with deep relief cut matted backgrounds spanning across nearly all of the barrel, cylinder, and frame, along with vine pattern flush gold inlay bordering accented with some floral patterns and raised inlaid pedals also spanning across the barrel, cylinder, and frame, with the work signed "R. STROSIN/ENGRAVER: on the lower front portion of the frame. It has fixed ramped blade front and adjustable notch rear sights on a flat rib, the caliber designation and model name on the right side of the barrel, and the model designation marked on the frame under the crane. Matching visible serial numbers on the frame, ejector, and butt, along with matching "54374" assembly numbers on the grip frame and crane. Fitted with a pair of enlarged checkered walnut grips with Smith & Wesson medallion inserts. Housed in an intricately crafted hardwood presentation case, with differing colored floral motif maple inlays on the sides, fitted for the revolver and containing two walnut handled cleaning rods, a walnut handled screwdriver, six nickel dummy cartridges, and a key for the case. Manufacturer: Smith & Wesson Model: 28 2 BBL: 6 inch solid rib Gauge: 357 Magnum Finish: blue/French grey/gold Grips: walnut Serial NumberN42398 Class: Curio & Relic Handgun

Lot: 387 - Smith & Wesson .357 Registered Magnum with Ivory Grips and Case

Excellent and Desirable Smith & Wesson .357 Registered Magnum Double Action Revolver with Ivory Grips, King Front Sight, and Case Manufactured in 1939. Due to the high cost of production because of their special ordered and hand-fitted nature, only approximately 5,500 of these Smith & Wesson Registered Magnums were produced before production was halted around 1939-1940. Roy Jinks notes in a 2010 article for the Smith & Wesson Collectors Association Journal that only 778 of these Registered Magnums were produced with a 6 inch barrel like this example. Features King ramped and mirrored red insert blade front and adjustable notch rear sights with a checkered rib and top strap, the caliber designation on the right of the barrel, the Smith & Wesson trade mark on the right of the frame, and the registration number "REG. 4907" on the frame under the crane. Matching full visible serial numbers on the barrel, crane, cylinder, ejector and butt. Fitted with a non-factory pair of smooth ivory grips. Includes a non-factory crafted display case fitted for the revolver. Manufacturer: Smith & Wesson Model: Registered Magnum BBL: 6 inch solid rib Gauge: 357 Magnum Finish: blue Grips: ivory Serial Number58907 Class: Curio & Relic Handgun

Lot: 388 - Factory "Pinto" Finish Smith & Wesson Pre-Model 27 .357 Magnum

Excellent Factory Special Order Two-Tone "Pinto" Finish Smith & Wesson Pre-Model 27 .357 Magnum Double Action Revolver with Box and Factory Letter Manufactured in 1955, this is a highly desirable example of Smith & Wesson's Pre-Model 27 .357 Magnum revolver with the attractive factory two-tone "pinto" finish built on the 5-screw frame. It is unknown exactly how many of these revolvers were produced with "pinto" finish but they are significantly more rare than full-blue or full-nickel finished variations. The included factory letter lists the revolver with an 8 3/8 inch barrel, target hammer, bright blue and nickel finish, and rosewood target square butt grips when shipped to Rex Firearms Co. in New York City on 5 October 1955 as part of a ten-gun shipment of revolvers in this configuration. Rex Firearms was a high end firearms dealer in New York and was one of the best places in the country to buy a highly embellished, deluxe Smith & Wesson such as this one. Knowledgeable collectors note that Rex Firearms Co. was a large distributor for Smith & Wesson, but that much of their focus was on special ordered, non-standard arms, such as special finishes and engraved guns, including a large number of "pintos". The revolver has the standard Smith & Wesson markings as well as the matching serial number on the butt, rear face of the cylinder, front face of the ejector star, and in the ejector shroud housing. The matching assembly number is on the frame and crane. It is fitted with a ramped blade front sight with orange insert, adjustable notch rear sight, and a pair of smooth rosewood grips with "S&W" monogram medallions. Includes the original plain blue box that is hand-numbered to the gun and hand-marked with the matching specifications of the gun in white wax pencil. Manufacturer: Smith & Wesson Model: 357 Magnum BBL: 8 3/8 inch solid rib Gauge: 357 Magnum Finish: blue/nickel Grips: rosewood Serial NumberS151263 Class: Curio & Relic Handgun

Lot: 389 - Smith & Wesson .357 Registered Magnum Double Action Revolver

Desirable Smith & Wesson .357 Registered Magnum Double Action Revolver with Box, Registration Certificate, and Factory Letter Manufactured in 1935, the first year of production, this is a very fine example of the iconic Smith & Wesson Registered Magnum revolver in the longest barrel length offered. Roy Jinks notes in a 2010 article for the Smith & Wesson Collectors Association Journal that only 677 of these Registered Magnums were produced with a 8 3/4 inch barrel like this example. These highly tuned, highly finished, special order revolvers were one of the finest handguns available at the time, leading many into the hands of law enforcement, but also leading to high production costs which eventually brought an end to the Registered Magnum program in 1939-1940. The included factory letter with this example, Reg. # 572, lists it with an 8 3/4 inch barrel, blue finish, magna grips, a McGivern gold bead front sight, a square notch rear sight, and sighted at 50 yards for a 6 o'clock hold with magnum ammunition when shipped to George E. Dunn in Houlton, Maine on 6 November 1935. The included reproduction registration certificate by Roy Jinks confirms that information. Also included are copies of the original order form, an invoice, and letters between George Dunn and Victor Wesson. The revolver has the standard Smith & Wesson markings as well as the matching serial number on the butt, rear face of the cylinder, in the ejector rod shroud, front face of the ejector star, and rear face of the yoke. The inside of the replacement right grip panel is numbered to a different gun. The inside of the left grip panel is hand-carved with "LC 1945". The registration number is on the crane, and the matching assembly number is marked on the frame and crane. It is fitted with a McGivern gold bead blade front sight, an adjustable notch rear sight, and a pair of checkered walnut magna grips with "S&W" monogram medallions at the tops. Includes an unnumbered correct factory box. Manufacturer: Smith & Wesson Model: Registered Magnum BBL: 8 3/4 inch solid rib Gauge: 357 Magnum Finish: blue Grips: walnut Serial Number47061 Class: Curio & Relic Handgun

Lot: 390 - Smith & Wesson .357 Registered Magnum Double Action Revolver

Highly Desirable A.F. Stoeger Shipped Smith & Wesson .357 Registered Magnum Double Action Revolver with Registration Certificate, and Factory Letter Manufactured in 1937, this is an excellent example of the Smith & Wesson Registered Magnum revolver in the longest barrel length offered. According to Roy Jinks in a 2010 article for the Smith & Wesson Collectors Association Journal, only 677 of these revolvers were ordered with an 8 3/4 inch barrel out of the approximately 5,500 total production. These Registered Magnums were essentially all special ordered, highly optioned, and precisely hand-fitted revolvers, leading to high production costs and the eventual discontinuation of the program around 1939-1940. The included factory letter with this example lists the revolver with registration no. 3212, an 8 3/4 inch barrel, blue finish, 1/10 inch Call gold bead front sight, square notch rear sight, checkered walnut Magna grips, and sighted at 25 yards with magnum ammunition for a 6 o'clock hold when shipped to A.F. Stoeger Co. in New York, on 28 November 1937. The included reproduction registration certificate by Roy Jinks lists the same information as well as a 3 1/2 lb. single action trigger pull and a 10 lb. double action trigger pull. The revolver has the standard markings including the matching serial number on the butt, rear face of the cylinder, rear of the crane, inside the ejector star, and in the ejector rod shroud, the registration number on the frame, and the matching assembly number is on the frame and crane. The inside of the right grip panel is stamped "54527". It is fitted with a Call gold beaded blade front sight, adjustable notch rear sight, and period replacement checkered walnut grips with "S&W" medallion monograms at the tops. Manufacturer: Smith & Wesson Model: Registered Magnum BBL: 8 3/4 inch solid rib Gauge: 357 Magnum Finish: blue Grips: walnut Serial Number55111 Class: Curio & Relic Handgun

Lot: 391 - Smith & Wesson .357 Registered Magnum Double Action Revolver

Desirable Smith & Wesson .357 Registered Magnum Double Action Revolver with Box and Factory Letter Manufactured in 1937, this is an exceptionally fine example of Smith & Wesson's iconic .357 Registered Magnum. These revolvers were all special ordered and hand fitted, leading to high production costs and a fairly short production run of only around 5,500. In a 2010 article for the Smith & Wesson Collectors Association Journal, Roy Jinks notes that only 1,439 of these Registered Magnums were produced with a 6 1/2 inch barrel. The included factory letter lists the revolver with registration no. 3247, a 6 1/2 inch barrel, Patridge blade front sight, a square notch rear sight, blue finish, checkered walnut grips with grip adapters attached (grip adapters currently absent), and sighted at 20 yards with .38 special mid-range ammunition for a 6 o'clock hold when shipped to H.A. Campbell in Newark, Ohio, on 19 November 1937. The revolver has the standard Smith & Wesson markings, as well as matching serial numbers on the butt, rear face of the cylinder, in the ejector rod shroud, front face of the ejector star, and rear face of the crane. The matching assembly number is on the frame and crane, and the registration number is on the frame. It is fitted with a pinned Patridge blade front sight, adjustable notch rear sight, and a pair of unnumbered checkered walnut magna grips with "S&W" monogram medallions. Includes a correct factory blue and gold Registered Magnum box and a copy of the invoice. Manufacturer: Smith & Wesson Model: Registered Magnum BBL: 6 1/2 inch solid rib Gauge: 357 Magnum Finish: blue Grips: walnut Serial Number54158 Class: Curio & Relic Handgun

Lot: 392 - Smith & Wesson .44 Hand Ejector 2nd Model Double Action Revolver

Smith & Wesson .44 Hand Ejector 2nd Model Double Action Revolver with Box Manufactured from 1915 to 1940. The revolver is built on a U.S. inspected frame: marked with an "eagle head/S2" inspector proof. The lanyard ring on the butt appears to be an old replacement. The right grip panel is unnumbered. Matching serial numbers on the butt, cylinder, crane, ejector, and barrel. With an unnumbered S&W .44 Military labeled box. Manufacturer: Smith & Wesson Model: 44 Hand Ejector BBL: 6 1/2 inch round Gauge: 44 S&W special Finish: nickel Grips: walnut Serial Number16669 Class: Curio & Relic Handgun

Lot: 393 - Smith & Wesson .357 Magnum Pre-Model 27 Double Action Revolver

Excellent Smith & Wesson .357 Magnum Pre-Model 27 Double Action Revolver Manufactured c. 1953-1954. Features a pinned red insert blade front and adjustable white outline notch rear sights atop a checkered rib, the caliber designation marked on the right side of the barrel, along with the Smith & Wesson address and trade mark on the right side of the frame. Matching full serial numbers on the barrel, crane, cylinder, ejector, and butt. Fitted with a pair of checkered walnut magna grips with Smith & Wesson medallion inserts and a matching serial number stamped on the interior of the right panel. Manufacturer: Smith & Wesson Model: 357 Magnum BBL: 8 3/8 inch solid rib Gauge: 357 Magnum Finish: blue Grips: walnut Serial NumberS95330 Class: Curio & Relic Handgun

Lot: 394 - Smith & Wesson .44 Magnum Pre-Model 29 Double Action Revolver

Desirable Smith & Wesson .44 Magnum Pre-Model 29 Double Action Revolver Manufactured c. 1957-1958. Features fixed red insert ramped blade front and adjustable white outline notch rear sights on top of a serrated rib, the caliber designation marked on the right side of the barrel, along with the Smith & Wesson address and trade mark on the right side of the frame. Matching visible full serial numbers on the frame, ejector, and butt, along with matching "89122" assembly numbers on the grip frame and crane. Fitted with a pair of checkered walnut target grips with Smith & Wesson medallion inserts. Manufacturer: Smith & Wesson Model: 44 Magnum BBL: 6 1/2 inch solid rib Gauge: 44 Magnum Finish: blue Grips: walnut Serial NumberS180643 Class: Curio & Relic Handgun

Lot: 395 - Nickel Plated Smith & Wesson Model 29-2 Revolver with Case

Nickel Plated Smith & Wesson Model 29-2 Double Action Revolver with Case Manufactured c. 1975-1976. Features fixed red insert ramped blade front and adjustable white outline notch rear sights on top of a serrated rib, the caliber designation on the right side of the barrel, the Smith & Wesson address and trade mark on the right of the frame, and the model designation marked on the frame under the crane. Matching full serial numbers visible on the frame, ejector, and butt, along with matching "37223" assembly numbers on the grip frame and crane. Includes a walnut presentation case fitted for the revolver containing a screwdriver, bore swab, and cleaning rod. Manufacturer: Smith & Wesson Model: 29-2 BBL: 6 1/2 inch solid rib Gauge: 44 Magnum Finish: nickel Grips: walnut Serial NumberN397179 Class: Modern Handgun

Lot: 396 - 6 1/2 Inch Barrel Smith & Wesson Pre-Model 20 .38/44 Revolver

Excellent and Scarce 6 1/2 Inch Barrel Smith & Wesson Pre-Model 20 .38/44 Heavy Duty Double Action Revolver Manufactured c. 1956-1957, with a very scarce 6 1/2 inch round barrel. Features fixed rounded blade front and top strap notch rear sights, the caliber designation marked on the right side of the barrel, along with the Smith & Wesson address and trade mark on the right side of the frame. Matching full visible serial numbers on the barrel, crane, cylinder, ejector, and butt, along with matching "71355" assembly numbers on the frame and crane. Fitted with a pair of checkered walnut magna grips with Smith & Wesson medallion inserts. Manufacturer: Smith & Wesson Model: 38/44 Heavy Duty BBL: 6 1/2 inch round Gauge: 38 Special Finish: blue Grips: walnut Serial NumberS155922 Class: Curio & Relic Handgun

Lot: 397 - Gwinnell Signed Engraved Colt New Frontier Single Action Army

Jan Gwinnell Signed and Factory Class "C" Master Engraved Colt Third Generation New Frontier Single Action Army Revolver with Box Manufactured in 1981. Features fixed sights, standard Colt factory markings, along with Class "C" pattern floral scroll engraving with around 75% coverage of the frame, cylinder, and barrel, with the left of the rear grip strap signed by Master Engraver Jan L. Gwinnell, marked "-COLT ENG." and dated "8-30-1982". Matching full "14044NF" serial numbers on the frame and both grips straps, along with matching partial serial number on the front of the cylinder and rear of the loading gate. Fitted with a pair of smooth walnut grips with gold washed Rampant Colt medallion inserts and matching serial numbers written on the interiors in pencil. Includes the original Colt wood-grain box with a matching Colt Custom Gun Shop end label that confirms the Class "C" engraving and lists the order number as "CS#1733". Manufacturer: Colt Model: New Frontier BBL: 7 1/2 inch round Gauge: 44-40 WCF Finish: blue/casehardened Grips: walnut Serial Number14044NF Class: Modern Handgun

Lot: 398 - Factory "D" Engraved Colt Third Generation Single Action Army

Factory Class "D" Engraved and Nickel Plated Colt Third Generation Single Action Army Revolver with Case Manufactured in 1987. Features fixed sights, standard Colt factory markings, along with Class "D" pattern floral scroll engraving with nearly full coverage of the frame, cylinder, and barrel, along with a partial "COLT ENG." mark on the left of the front grip strap. Matching full serial numbers on the frame and grip straps, along with a matching partial serial number on the front of the cylinder. Fitted with a pair of smooth walnut grips marked with faint matching serial numbers on the interiors in yellow pencil. Includes a shipping sleeve with a matching numbered Colt Custom Gun Shop end label confirming the Class "D" factory engraving and identifying the factory order number as "10723", and a Colt Custom Gun Shop leatherette presentation case with orange felt interior French fitted for the revolver. Manufacturer: Colt Model: Single Action Army BBL: 7 1/2 inch round Gauge: 45 Long Colt Finish: nickel Grips: walnut Serial NumberSA04383 Class: Modern Handgun

Lot: 399 - Factory "B" Engraved Colt Third Generation Single Action Army

Factory Class "B" Engraved Colt Third Generation Single Action Army Revolver with Case Manufactured in 1977. Features fixed sights, standard Colt factory markings, along with Class "B" pattern floral scroll engraving with around 50% coverage of the frame, cylinder, and barrel, along with a partial "COLT ENG." mark on the left of the front grip strap. According to the table on page 118 of "The Post-War Colt Single-Action Revolver 1955-1975" by Don Wilkerson, this revolver is one of only 13 of its configuration produced from 1956 to 1979 in .45 caliber with a 7 1/2 inch barrel, blue finish, and Class "B" factory engraving. Matching full serial numbers on the frame and grip straps, along with a matching partial serial number on the front of the cylinder. Fitted with a pair of black checkered hard rubber grips with matching serial numbers etched into the interiors. Includes a Colt Custom Gun Shop leatherette presentation case with orange felt interior French fitted for the revolver. Manufacturer: Colt Model: Single Action Army BBL: 7 1/2 inch round Gauge: 45 Long Colt Finish: blue/casehardened Grips: hard rubber Serial Number86119SA Class: Modern Handgun

Lot: 400 - Spectacular Pre-War/Post-War Colt Single Action Army with Box

Spectacular Individual Shipped Pre-War/Post-War Colt Single Action Army Revolver with Box and Factory Letter Having its frame serial number factory applied in 1940, this is a scarce example of a pre-World War II Colt Single Action Army revolver that was subsequently factory assembled and finished after the war and kept at the factory. The accompanying factory letter states the revolver was shipped

Lot: 401 - Pre-War/Post-War Colt Single Action Army with Factory Letters

Scarce Documented Pre-War/Post-War Colt Single Action Army Revolver with Factory Letters Having its frame serial number factory applied in 1940, this is a scarce example of a pre-World War II Colt Single Action Army revolver that was subsequently factory assembled and finished after the war and kept at the factory. Two factory letters are included with the newer of the two listing the revolver as manufactured on March 29, 1948, and shipped at a later date on March 8, 1956, to Joseph A. Lorch (a Colt representative/distributor) at 1010 Vermont Avenue N.W. in Washington, D.C., in .38 caliber with a 5 1/2 inch barrel, blue finish, and type of grips not listed, as part of two guns of the same type in the shipment. Both factory letters have a similar further remark with the newer of the two stating, "Subject revolver is a pre-war/post-war model. The frame and components were manufactured prior to World War II with assembly being accomplished in the post-war period." The Pre-War/Post-War Single Action Army revolvers are found in the 356000-357000 serial number range, and many are known to have been used by Colt for advertising and public relations purposes. There were only 338 pre-World War II manufactured Colt Single Action revolvers assembled after World War II, which comprise the group of revolvers referred to as Pre-War/Post-War by collectors per page 19 of "Colt's Single Action Army Revolver Pre-War Post-War Model" by Don Wilkerson. This is one of 163 of these Pre-War/Post-War revolvers reportedly manufactured in this specific configuration, being in .38 Special caliber, with a 5 1/2 inch barrel, and blue/casehardened finish, of which only 12 were listed as shipped in this configuration in the year 1956, per information on pages 28 and 100 of Wilkerson's aforementioned book. The left side of the trigger guard has the Colt factory triangle "VP" proof and an "F" inspector's stamp. The matching visible full serial number is marked on the frame, grip straps, and correctly hand etched on the interiors of both grips, with the matching partial number "75" on the rear of the cylinder. Assembly number "460" is marked on the loading gate and rear surface of the frame. Manufacturer: Colt Model: Single Action Army BBL: 5 1/2 inch round Gauge: 38 Special Finish: blue/casehardened Grips: hard rubber Serial Number357675 Class: Curio & Relic Handgun

Lot: 402 - Engraved Gold Inlaid Colt Sheriff's Model Single Action Army

Limited Edition Jan Gwinnell Signed, Master Factory Engraved, and Gold Inlaid Colt Sheriff's Model Single Action Army Revolver with Checkered Ivory Grips Manufactured in 1981, one of a limited edition of just 35 produced, with this example being the 27th. It features floral scroll pattern engraving with more than 25% coverage across the barrel, cylinder, frame and grips straps, flush gold inlaid bordering on the barrel, cylinder, and frame, gold plating on the grip straps and cylinder pin, with the work signed "GJ GWINNELL" on the left side of the grip frame for Colt Master Factory Engraver Jan Gwinnell. It also features the caliber designation flush gold inlaid on the left side of the barrel, the serial number and Rampant Colt along with "1 OF 35" flush gold inlaid on the frame, flush gold inlaid fleur-de-lis patterns on the cylinder, along with a raised gold inlaid sheriff's badge on the left of the recoil shield and a raised gold inlaid pair of handcuffs on the loading gate. With fixed blade front and top strap notch rear sights, the two-line Colt address on top of the barrel, the two-line patent dates on the left of the frame, along with a triangle "VP" factory proof and "K" on the left side of the trigger guard. Matching "27" partial serial numbers on the grip straps, along with matching "27-35" numbers on the front of the cylinder and rear of the loading gate. Fitted with a pair of checkered ivory grips marked "27-35" on the interiors in pen. Manufacturer: Colt Model: Single Action Army BBL: 3 1/2 inch round Gauge: 45 Long Colt Finish: blue/gold Grips: ivory Serial Number27-35SHERIFF Class: Modern Handgun

Lot: 403 - Western Theme Engraved and Gold Inlaid Colt Single Action Army

Attractive Western Theme Engraved and Gold Inlaid Colt Third Generation Single Action Army Revolver with Box Manufactured in 1981, subsequently masterfully embellished by an unknown skilled artisan. Features roughly 25% coverage floral scroll pattern engraving with matted backgrounds along with flush gold inlaid borders with some floral vine accents spanning across the barrel, ejector rod housing, cylinder, frame, and grip straps, along with flush gold inlaid Rampant Colt on the left of the recoil shield and a raised gold inlaid bull skull on the right of the frame, with all major components in a blue finish and niter blued screws. It has fixed sights and standard Colt factory markings, with the caliber designation on the left of the barrel flush gold inlaid. Matching full serial numbers on the frame and grip straps, along with a matching partial serial number on the front of the cylinder. Fitted with a pair of black checkered hard rubber grips with matching serial numbers etched onto the interiors (positioning pin absent). Includes the original Colt wood-grain box with a matching numbered end label. Manufacturer: Colt Model: Single Action Army BBL: 7 1/2 inch round Gauge: 44 Special Finish: blue/gold Grips: hard rubber Serial NumberSA48153 Class: Modern Handgun

Lot: 404 - Engraved and Gold Plated Colt New Frontier Single Action Army

Western Theme Engraved, Gold Inlaid and Plated Colt Third Generation New Frontier Single Action Army Revolver in .44-40 W.C.F. Manufactured in 1981, subsequently masterfully embellished by an unknown skilled artisan. Features floral scroll pattern engraving with punch dot backgrounds spanning across roughly 25% of the barrel, cylinder, frame, and grip straps, along with flush gold inlaid bands on the muzzle and cylinder, a flush gold inlaid Rampant Colt on the left of the recoil shield, and a raised gold inlaid bull skull on the right of the frame. The blued barrel, cylinder, and frame are contrasted with gold plating on the ejector rod, cylinder rod, hammer, trigger, and both grip straps. It has fixed blade front and adjustable notch rear sights, along with standard Colt factory markings. Matching full serial numbers on the frame and grip straps, along with a matching partial serial number on the front of the cylinder. Fitted with a smooth conjoined hardwood grip. Manufacturer: Colt Model: New Frontier BBL: 7 1/2 inch round Gauge: 44-40 WCF Finish: blue/gold Grips: hardwood Serial Number12482NF Class: Modern Handgun

Lot: 405 - Early First Year Production Number "22" Colt Python with Letter

Desirable Joe Bodrie Exhibition Shooter Loan Account Shipped Very Early First Year Production Two-Digit Serial Number "22" Colt Python Double Action Revolver with Factory Letter Manufactured in 1955, the first year of production for Colt's Python model revolver with an approximate serial number range of 1 to 299 as shown in the table on page 47 of the "Blue Book Pocket Guide for Colt Dates of Manufacture" by R. L. Wilson and Allen, with this very early example bearing the two-digit serial number "22". The included factory letter confirms this revolver's configuration, with a 6 inch barrel in .357 Magnum caliber, royal blue finish, and type of grips not listed, when sent as the only gun of its type in a shipment to the loan account of Mr. Joe Bodrie (a Colt exhibition shooter during the time) at 18221 Marsha Drive in Wyandotte, Michigan, on December 1, 1955. The factory letter also indicates that the revolver was returned to the factory on March 13, 1957, and subsequently sold as a "used, shopworn salesman's sample" to Joe Bodrie on the same day. Features fixed blade front and adjustable notch rear sights, the one-line Colt address on the right of the barrel, the two-line model and caliber designations on the left of the barrel, a Rampant Colt on the left of the frame, along with a Colt triangle "VP" factory proof and "J" on the left of the trigger guard. Matching two-digit "22" serial numbers on the frame and crane. Fitted with an extended shoe on the trigger and a pair of checkered walnut grips with gold washed Rampant Colt medallion inserts. Manufacturer: Colt Model: Python BBL: 6 inch vent rib Gauge: 357 Magnum Finish: royal blue Grips: walnut Serial Number22 Class: Curio & Relic Handgun

Lot: 406 - Scarce and Desirable 4 Inch Barrel Colt Boa Revolver with Box

Scarce and Desirable 4 Inch Barrel Colt Boa Double Action Revolver with Box Developed as a combination of the Mark V Trooper frame and the Python barrel, the Colt Boa was only manufactured in 1985 as a Lew Horton Distributing limited edition, with a total run of only 1,200 produced. Half were built with 6 inch barrels, and the other half with 4 inch barrels, making both variations among the rarest of the production model Colt "snake" guns. Features a red-ramp blade front and adjustable notch rear sights, the two-line model and caliber designation on the left of the barrel with the one-line Colt address on the right side, a Rampant Colt on the left of the frame, and a Colt triangle "VP" factory proof on the left side of the trigger guard. Matching full serial numbers on the crane and frame. Fitted with a pair of over-sized checkered rosewood grips with gold washed Colt medallion inserts. Includes an un-numbered Colt "wood grain" box. Manufacturer: Colt Model: Boa BBL: 4 inch vent rib Gauge: 357 Magnum Finish: blue Grips: rosewood Serial NumberBOA0679 Class: Modern Handgun

Lot: 407 - 3 Inch Barrel Colt Combat Python Revolver with Box

Scarce and Highly Desirable 3 Inch Barrel Colt Combat Python Double Action Revolver with Box Manufactured in 1988, as part of an exclusive 500 revolver run for Lew Horton Distributing Company Inc. of Southboro, Massachusetts, per page 702 of "Forty-Fourth Edition Blue Book of Gun Values". Features fixed red-ramped front and adjustable notch rear sights, the two-line Colt address roll-marked on the right side of the barrel with the "COMBAT PYTHON" model and caliber designations on the left of the barrel, a Rampant Colt on the left side of the frame, along with a Colt triangle "VP" factory proof and "V" on the left side of the trigger guard. Matching full serial numbers on the frame and crane. Fitted with a pair of checkered walnut service grips with gold Rampant Colt medallion inserts. Includes the original Colt "heritage" box with a matching numbered end label. Manufacturer: Colt Model: Combat Python BBL: 3 inch vent rib Gauge: 357 Magnum Finish: blue Grips: walnut Serial NumberT73782 Class: Modern Handgun

Lot: 408 - Colt Python Revolver Shipped to Skeeter Skelton with Letter

Desirable Colt Python Double Action Revolver Shipped to Famed Skeeter Skelton with Factory Letter The included factory letter confirms the current caliber, barrel length, and Royal Blue finish with grips "Not Listed" when the revolver was shipped to Route 1 Deming, New Mexico, on April 11th, 1974, and delivered to the famed American author, handgunner, and lawman Skeeter Skelton. Charles "Skeeter" Skelton served in the United States Marine Corps, with the U.S. Border Patrol, as Sheriff of Deaf Smith County, Texas, in the DEA, and the U.S. Customs Service before dedicating his time fully as handgun writer and editor for the firearms periodical "Shooting Times" where he would go on to become one of the most prolific firearms writers of all time, publishing some 400 articles. The revolver features a ramp blade front sight, adjustable notch rear sight, standard factory markings, an action job by Sadowski, and a pair of checkered walnut grips with silver Colt medallion inserts. Also included with the lot is a certificate of authenticity signed by Sally Skelton attesting that this revolver was a part of Skeeter's collection as well as a folder of information on this revolver and Skelton along with correspondence with Skeeter's son Bart Skelton, who was himself an accomplished writer and lawman. Manufacturer: Colt Model: Python BBL: 6 inch vent rib Gauge: 357 Magnum Finish: Royal Blue Grips: walnut Serial NumberE60803 Class: Curio & Relic Handgun

Lot: 409 - Cased Pair of George Spring Engraved Colt Woodsman Pistols

Factory Presentation Cased Pair of George Spring Master Factory Class "C" Engraved and Gold Inlaid Colt Third Series Woodsman Match Target Semi-Automatic Pistols with Factory Letters -A) Colt Third Series Woodsman Match Target Pistol Factory Presentation Cased Pair of George Spring Master Factory Class "C" Engraved and Gold Inlaid Colt Third Series Woodsman Match Target Semi-Automatic Pistols with Factory Letters -A) Colt Third Series Woodsman Match Target Pistol Manufactured c. 1983. The included factory letters confirm the configurations of both pistols in the lot, including the respective barrel lengths (4 1/2 inch for "A", 6 inch for "B") in .22 caliber, blue finish, type of grips not listed, factory Class "C" engraving performed by Colt Master Engraver George Spring, gold inlaid bordering on the barrels and slides, and provisioned with a French fit double presentation case, when they were both sent together in a shipment to Cherry's Sporting Goods Co. at 1039 South Oakwood Avenue in Geneseo, Illinois, on April 26, 1983. Both pistols feature Colt factory Class "C" floral scroll engraving with punch-dot backgrounds and around 75% coverage across the frames, barrels, and slides, along with wire gold inlay bordering on the sides of the barrels and slides. They have fixed blade front and adjustable notch rear sights, bear standard Colt factory markings, and are fitted with pairs of well-figured and checkered walnut grips. They are housed in a double Colt Custom Gun Shop walnut presentation case with a velvet interior French fit for both pistols. Manufacturer: Colt Model: Match Target BBL: 4 1/2 inch slab side Gauge: 22 Long Rifle Finish: blue/gold Grips: walnut Serial Number310375S Class: Curio & Relic Handgun B) Colt Third Series Woodsman Match Target Pistol Manufactured in 1974. As described in "A". Manufacturer: Colt Model: Match Target BBL: 6 inch slab side Gauge: 22 Long Rifle Finish: blue/gold Grips: walnut Serial Number058030S Class: Curio & Relic Handgun

Lot: 410 - Class "A" Factory Engraved Colt Targetsman Semi-Automatic Pistol

Very Scarce and Exceptional Class "A" Factory Engraved Colt Targetsman Semi-Automatic Pistol with Factory Letter Manufactured in 1983, this is an extremely scarce example of a factory engraved Colt Targetsman pistol. Though no specific production numbers are known regarding the number of factory engraved Colt Targetsman pistols, we have only previously cataloged one other example here at Rock Island Auction Company, and as of its publishing date in 1971, "The Book of Colt Firearms" by Wilson notes that no engraved examples had been produced. The included factory letter lists this pistol in .22 Long Rifle with a 6 inch barrel, blue finish, and factory Class "A" standard level scroll engraving when shipped to Sports Inc. of Lewiston, Montana, for the Powderhorn Gun Shop of Bozeman, Montana, on 26 August 1983 as part of factory order no. 2311 and the only gun of its type in the shipment. The pistol features highly attractive Class "A" factory engraving exhibiting flourishes of floral scrollwork on beaded backgrounds on all of the major components. It otherwise has standard Colt markings. It is fitted with a blade front sight, adjustable notch rear sight, and a pair of checkered walnut target grips. Manufacturer: Colt Model: Targetsman BBL: 6 inch round Gauge: 22 Long Rifle Finish: blue Grips: walnut Serial Number063719S Class: Modern Handgun

Lot: 411 - Cased Factory Engraved President's Edition Officer's ACP Pistol

Spectacular Company President Gary W. French Shipped Alvin A. White Signed, Master Class "B" Factory Engraved, and Gold Inlaid Colt President's Edition Officer's ACP Model Semi-Automatic Pistol with Case and Factory Letter Manufactured c. 1987-1988. The included factory letter confirms this pistol's configuration, including the 3 1/2 inch barrel in .45 ACP caliber, blue finish, walnut grips, factory engraving, and furnished with a French fitted cherry presentation case, when shipped to Gary W. French at 150 Huyshope Avenue in Hartford, Connecticut, on June 24, 1988. The factory letter further notes that Gary French, the President of Colt Firearms at the time, commissioned the Colt Custom Shop to create the President's Edition, with the ornamental motif designed by Colt Custom Shop Manager Al DeJohn and the engraving executed by Master Engravers Steve Kamyk and Alvin A. White, with this example signed "A.A.W" for Alvin White under the Rampant Colt on the left of the slide. It was processed under Colt Custom Shop Order #2900. The factory letter also confirms the features of flush gold inlaid bands at the front and gold inlaid borders at the rear of the slide, "COLT PRESIDENT'S EDITION" in a gold inlaid banner and gold highlighted Rampant Colt on the left of the slide, and factory Class "B" pattern floral scroll engraving with punch-dot backgrounds covering around 50% of the frame and slide. It has fixed blade front and notch rear sights, along with standard Colt factory markings. Fitted with a pair of checkered walnut grips with gold washed Rampant Colt medallion inserts. Also includes the aforementioned Colt cherry presentation case with light blue (the factory letter lists as tyrol red) velvet lining French fitted for the pistol. Manufacturer: Colt Model: Officers ACP BBL: 3 5/8 inch round Gauge: 45 ACP Finish: blue/gold Grips: walnut Serial NumberGWF09080 Class: Modern Handgun

Lot: 412 - Factory Engraved Colt Huntsman Pistol with Box and Letters

Factory Class "A" Engraved and Nickel Plated Colt Huntsman Semi-Automatic Pistol with Original Box and Factory Letters Manufactured in 1972, the first of the two included factory letters (dated 2018) lists this pistols configuration including a 6 inch barrel in .22 Long Rifle caliber, blue finish, and type of grips not listed, when included in a shipment of 15 pistols of the same type sent to Bern's Wholesale Sporting Goods at 4500 East 48th Avenue in Denver, Colorado, on September 13, 1972. The second letter (dated 2022) confirms the pistol's current configuration, including the 4 1/2 inch barrel in .22 Long Rifle caliber, nickel finish, wood grips, and Class "A" standard level factory scroll engraving (engraver's name not listed) when sent as the only pistol of its type in a shipment to Sile Distributors Inc. at 988 North Colony Road in Meridian, Connecticut, on June 10, 1988, under Colt Factory Order #3442. The second letter also notes the original 1972 shipment of the pistol and that it was later returned to Colt for embellishment. Features factory Class "A" standard level floral scroll engraving with some punch-dot backgrounds covering approximately 25% of the frame, barrel, and slide. It has fixed blade front and notch rear sights along with standard Colt factory markings. Fitted with a pair of checkered walnut grips with matching serial numbers written on the interiors in pen. Also includes the original Colt "heritage" factory box with a matching numbered Colt Custom Gun Shop end label. Manufacturer: Colt Model: Huntsman BBL: 4 1/2 inch round Gauge: 22 Long Rifle Finish: nickel Grips: walnut Serial Number038984S Class: Curio & Relic Handgun

Lot: 413 - Factory Class "C" Engraved Colt Commander .38 Super Pistol

Extremely Rare Factory Class "C" Engraved Colt Commander .38 Super Semi-Automatic Pistol with Box and Factory Letter Manufactured in 1953, this is an extremely rare example of a factory engraved Colt Commander pistol in the highly desirable .38 Super caliber. The included factory letter lists the pistol in .38 Super caliber with a 4 1/4 inch barrel, blue finish, grips not listed, and factory Class "C" engraving when shipped to the J.S. Oshman Company in Houston, Texas, on 20 April 1953 as the only gun of its type in the shipment. The factory letter further notes that the pistol returned to the factory on 9 July 1953, with no further information regarding its final destination. On p. 455-456 of "The Book of Colt Firearms" by Wilson it is noted that between 1949 and 1970 approximately 15 Colt Commanders were engraved spread across the three grades of engraving. These factory engraved Colt Commander pistols are extremely rare, with this example being the only one we have ever cataloged. The engraving features mostly flourishes of floral scrollwork, either with stippled backgrounds or no backgrounds. It has the standard Colt markings. It is fitted with blade and notch sights as well as a pair of checkered plastic grips with Rampant Colts at the center. Includes an unnumbered factory box. Manufacturer: Colt Model: Commander BBL: 4 1/4 inch round Gauge: 38 Super Finish: blue/black anodized Grips: plastic Serial Number22623-LW Class: Curio & Relic Handgun

Lot: 414 - J. R. French Engraved Colt Mk. IV Series 70 Government Pistol

J. R. French Signed and Engraved Colt Mk. IV Series 70 Government Model Semi-Automatic Pistol with Checkered Ivory Grips, Factory Letter, and Engraver's Certificate Manufactured in 1979, the included factory letter lists this pistol's configuration with a 5 inch barrel in .45 ACP caliber, blue finish, and wood grips when included in a shipment of 8 pistols of the same type sent to Universal Firearms Ltd. D/B/A Bells Gun & Sport Shop at 3313 West Mannheim Road in Franklin Park, Illinois, on July 17, 1979. It features floral scroll pattern engraving covering approximately 25% of the frame and slide, along with bordering and matted backgrounds on the sides of the slide and continuations on the slide catch and thumb safety, with the work signed "ENGR J. R. French 2012" on the right side of the grip frame under the panel. It has MMC branded fixed red insert blade front and white outline notch rear sights, along with standard Colt factory markings retained on the frame, slide, and barrel. Fitted with a pair of "double diamond" pattern checkered ivory grips. Also includes a matching numbered Engraver's Certificate signed by J. R. French and dated December 5, 2012. Manufacturer: Colt Model: Government BBL: 5 inch round Gauge: 45 ACP Finish: blue Grips: ivory Serial Number10033B70 Class: Modern Handgun

Lot: 415 - Factory Engraved Colt Mk. IV Series 70 Gold Cup NM Pistol

Attractive Factory Class "D" Engraved Colt Mk. IV Series 70 Gold Cup National Match Semi-Automatic Pistol with Case Manufactured in 1977. Features fixed Patridge blade front and "Elliason" adjustable target notch rear sights, standard Colt factory markings, and extensive Colt factory Class "D" level scroll engraving with near full coverage on the frame and slide along with continuations on the slide catch and thumb safety and a "COLT ENG." mark on the left side of the grip frame under the panel. Fitted with an adjustable trigger and a pair of checkered walnut grips with gold washed Rampant Colt medallion inserts. Includes a Colt Custom Gun Shop leatherette presentation case with orange felt interior French fit for the pistol. Manufacturer: Colt Model: Gold Cup National Match BBL: 5 inch round Gauge: 45 ACP Finish: blue Grips: walnut Serial Number70N42876 Class: Modern Handgun

Lot: 416 - Matched Collector's Set of Six World War Colt Model 1911 Pistols

Matched Collector's Serialized Set of Six World War Commemorative Colt Model 1911 Semi-Automatic Pistols with Cases -A) World War I Belleau Wood Commemorative Colt Model 1911 Pistol Matched Collector's Serialized Set of Six World War Commemorative Colt Model 1911 Semi-Automatic Pistols with Cases -A) World War I Belleau Wood Commemorative Colt Model 1911 Pistol Manufactured in 1968. Matching collector serialized "6469" with the other five pistols in the lot, as one of approximately 7,400 sets produced. Each pistol includes a commemorative display case, a matching box, and shipping box. Manufacturer: Colt Model: 1911 BBL: 5 inch round Gauge: 45 ACP Finish: blue Grips: hardwood Serial Number6469-BW Class: Curio & Relic Handgun B) World War I Second Battle of the Marne Commemorative Colt Model 1911 Pistol Manufactured in 1968. Manufacturer: Colt Model: 1911 BBL: 5 inch round Gauge: 45 ACP Finish: blue Grips: hardwood Serial Number6469-M2 Class: Curio & Relic Handgun C) World War I Chateau Thierry Commemorative Colt Model 1911 Pistol Manufactured in 1967. Manufacturer: Colt Model: 1911 BBL: 5 inch round Gauge: 45 ACP Finish: blue Grips: hardwood Serial Number6469-CT Class: Curio & Relic Handgun D) World War I Meuse Argonne Offensive Commemorative Colt Model 1911 Pistol Manufactured in 1969. Manufacturer: Colt Model: 1911 BBL: 5 inch round Gauge: 45 ACP Finish: blue Grips: hardwood Serial Number6469-MA Class: Curio & Relic Handgun E) World War II European Theater of Operations Commemorative Colt Model 1911A1 Pistol Manufactured in 1970. Includes seven dummy rounds and a hard copy of the book "Colt's Commemorative Edition of The American Heritage Pictures History of World War II" by C. L. Sulzberger. Manufacturer: Colt Model: 1911A1 BBL: 5 inch round Gauge: 45 ACP Finish: nickel Grips: hardwood Serial Number6469ETO Class: Curio & Relic Handgun F) World War II Pacific Theater of Operations Commemorative Colt Model 1911A1 Pistol Manufactured in 1970. Includes seven dummy rounds and a hard copy of the book "Colt's Commemorative Edition of The American Heritage Pictures History of World War II" by C. L. Sulzberger. Manufacturer: Colt Model: 1911A1 BBL: 5 inch round Gauge: 45 ACP Finish: nickel Grips: hardwood Serial Number6469PTO Class: Curio & Relic Handgun

Lot: 417 - Alvin A. White Master Engraved H&R U.S.R.A. Pistol

Highly Attractive Alvin A. White Signed Master Engraved Harrington & Richardson U.S.R.A. Model Single Shot Pistol Manufactured in the 1940s, this revolver bears the signature of noted master engraver Alvin White on top of the frame, with fine punch dot backed scrollwork engraved through the original blue finish on the barrel, frame and trigger guard. Adjustable blade front and notch rear sights, with the two-line address on the barrel rib, three-line caliber and model markings on the left side of the barrel, "A.A. WHITE ENG." under the barrel on the frame, serrated hammer, checkered trigger, and a bird's head grip frame with a one piece extended fancy walnut grip. Manufacturer: Harrington & Richardson Inc Model: USRA BBL: 8 inch solid rib Gauge: 22 Long Rifle Finish: blue Grips: walnut Serial Number3177 Class: Curio & Relic Handgun

Lot: 418 - Factory Engraved Limited Edition H&R Arms Co. Model 999 Revolver

Factory Engraved "International Exhibition" Limited Edition Harrington & Richardson Arms Co. Model 999 Sportsman Double Action Rimfire Revolver with Box and Case Manufactured c. 1970s, one of a limited edition of 999 featuring roughly 25% coverage of floral scroll pattern factory engraving on the barrel, cylinder, frame, and trigger guard, along with "1 of 999" marked in script on the right of the barrel. It has adjustable blade front and notch rear sights, the model and caliber designations on the left side of the barrel, the H&R Arms Co. address on the left side of the frame, and the serial number on the butt. Matching partial serial numbers on the rear of the cylinder and ejector. Fitted with a pair of checkered walnut grips with brass H&R medallion inserts. Includes a shipping box, a hand numbered matching factory box, an "INTERNATIONAL EXHIBITION" commemorative medal, and a walnut presentation case fitted for the revolver and medal. Manufacturer: Harrington & Richardson Inc Model: 999 BBL: 6 inch solid rib Gauge: 22 Long Rifle Finish: blue Grips: walnut Serial Number999296 Class: Modern Handgun

Lot: 419 - J.J.M.-2- Factory Engraved Pasadena Auto Mag Model 180 Pistol

Rare and Spectacular Serial Number "J.J.M.-2-" Company Executive J. Jerome Moiso Presentation Factory Engraved and Nickel Plated Pasadena Production Auto Mag Model 180 Semi-Automatic Pistol Manufactured c. 1971-1972, this example is one of a very few Auto Mag pistols that were factory engraved, with knowledgeable collectors believing the total may be as high as 20. It features a special "J.J.M-2-" serial number for company executive J. Jerome Moiso (1941-2024), a panel with the engraved initial "M" on the trigger guard, and extensive floral scroll patten engraving with 75% coverage believed to be by the hand of Japanese engraver Shiro Ogawa was contracted to embellish the pistol. Approximately 3,000 pistols were completed in total by Auto Mag in Pasadena, California, prior to the company filing for bankruptcy in mid-1972 and being subsequently renamed a handful of times. It has fixed ramped orange blade front and adjustable notch rear sights and the four-line manufacturer markings on the left of the barrel extension. Fitted with a pair of checkered black synthetic grips and a stainless magazine. Manufacturer: Auto Mag Model: 180 BBL: 6 inch vent rib Gauge: 44 Automag Finish: nickel Grips: synthetic Serial NumberJ.J.M-2- Class: Curio & Relic Handgun

Lot: 420 - Rare Sokolovsky Corp. .45 Automaster Pistol "No. 3" with Case

Very Rare Sokolovsky Corp. .45 Automaster Semi-Automatic Pistol "No. 3" with Case Introduced c. 1983 as the "Rolls Royce of .45 Auto Pistols" with no more than 45 examples believed to have been completed, the Automaster was designed by Paul J. Sokolovsky (1926-2008) of Sunnyvale, California, as a target pistol devoid of external knobs, buttons, levers, pins, or screws that are typical features on most all other production pistols. Instead, the design utilizes two secondary triggers positioned next to the main trigger in the trigger guard as the only tangible controls, with the left side secondary trigger functioning as a safety and the right side secondary trigger acting as the magazine release. This feature was patented by Sokolovsky, along with a pneumatic slide decelerator assembly and singulating apparatus (increased drop-safe capability of the striker and reduced trigger pull weight) that he also incorporated into the pistol. The barrel is secured to the frame through the use of a series of spring detents, rather than pins or links. The Automaster is one of the rarest production semi-automatic pistols on the collectors market, with three examples housed at the NRA museum (a tool room prototype, a pre-production prototype, and a production version) and Rock Island Auction Company having previously sold a consecutive example to this pistol ("No.2") for $23,500 in December 2022. It has a fixed serrated blade front sight and adjustable notch rear sight on a rib atop the slide, the three-line Sokolovsky address on the left and two-line model and caliber designations on the right of the slide in script behind the serrations, the patent marking "Patent No. 4,203,348" on the left of the frame, and the serial number "-1st Edition No. 3 of 50-" on the right of the frame. Fitted with a pair of smooth hardwood grips secured to the frame via velvet fabric on the interior of the panels. Includes a "Sokolovsky 45" marked hardwood presentation case and a manual. Manufacturer: Sokolovsky Corp Sport Arms Model: Automaster BBL: 6 inch round Gauge: 45 ACP Finish: stainless Grips: hardwood Serial Number-1st Edition No. 3 of 50- Class: Modern Handgun

Lot: 421 - Shostle Relief Engraved Belgian Browning Medalist Target Pistol

Spectacular Ben Shostle Signed and Relief Engraved Belgian Browning Medalist Semi-Automatic Target Pistol with Case Manufactured in 1973, then subsequently embellished by Master Engraver Ben Shostle, featuring extensive floral scroll pattern deep relief engraving and bordering, highlighted through the use of a French grey finish, with nearly full coverage across the visible sections of the barrel, slide, and frame, with the work signed "SHOSTLE" on the underside of the barrel. It has serrated Patridge blade front and adjustable target notch rear sights, standard FN factory markings, import mark, and a gold washed trigger. Fitted with a smooth rosewood forend and checkered one-piece target grip. Fitted with smooth deluxe walnut forend and over-sized thumb rest grips. Includes a black leatherette Browning case with red cloth lining, three barrel weights, a matching theme engraved barrel weight adapter, and screwdriver. Manufacturer: Fabrique Nationale Model: Medalist BBL: 6 3/4 heavy vent rib Gauge: 22 Long Rifle Finish: French grey/gold Grips: rosewood Serial Number53847T73 Class: Curio & Relic Handgun

Lot: 422 - Attractive Gold Damascene Spanish "Regina" Semi-Automatic Pistol

Attractive Gold Damascene Decorated Spanish "Regina" Semi-Automatic Pistol Manufactured in the 1920s and associated with the firm of Gregorio Bolumburu, the Regina pistol follows the pattern of the Browning designed 1908/Baby vest pocket pistol. In contrast to many of Browning's copyists in Spain trying to beat the master purely on price point, this Regina pistol has been attractively decorated with fine gold damascene overlay on over 80% of the surface, with abundant floral and leafy vine motifs, as well as a scene of two birds perched on a vine on top of the slide and a fantastic winged creature breathing fire on the right side of the slide. The decoration preserves the "AMERICAN AUTOMATIC PISTOL "REGINA" CAL 6.35" marking on the left side of the slide, with a set of checkered grips with crown-shaped imprints. An assembly number of "16" is present on the underside of the slide, top of the frame, underside of the barrel, and left side of the magazine. Manufacturer: Spanish Model: Regina BBL: 2 1/8 inch round Gauge: 25 ACP Finish: blue/gold Grips: hard rubber Serial NumberNSN Class: Curio & Relic Handgun

Lot: 423 - Factory Engraved Belgian Browning Renaissance High-Power Pistol

Factory Engraved Belgian Browning Renaissance High-Power Semi-Automatic Pistol Manufactured in 1969. Features extensive Belgian Renaissance pattern floral scroll relief engraving and bordering with nearly full coverage across the frame and slide, fixed sights, the Browning import and Belgium markings on the left of the slide, Belgian proofs on the frame, slide, and barrel, a matching "98" partial serial number on the underside of the slide, and a gold washed trigger. Fitted with a pair of smooth Nacrolac pearl grips and a French grey magazine. Note: This item features a high-capacity magazine which has a capacity above 10 rounds and cannot be sold or transferred to individuals in CA, CT, DC, HI, MD, MA, NJ, NY, RI, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Fabrique Nationale Model: High-Power BBL: 4 3/4 inch round Gauge: 9mm Luger Finish: French grey/gold Grips: pearlite Serial NumberT261198 Class: Curio & Relic Handgun

Lot: 424 - Factory Engraved Belgian Browning Renaissance High-Power Pistol

Factory Engraved Belgian Browning Renaissance High-Power Semi-Automatic Pistol Manufactured in 1974. Features fixed sights, the Browning import and Belgium markings on the left of the slide, Belgian proofs on the frame, slide, and barrel, a matching "505" partial serial number on the underside of the slide, a gold washed trigger, along with extensive Belgian Renaissance pattern floral scroll relief engraving and bordering with nearly full coverage across the frame and slide. Fitted with a pair of smooth Nacrolac pearl grips and a French grey magazine. Note: This item features a high-capacity magazine which has a capacity above 10 rounds and cannot be sold or transferred to individuals in CA, CT, DC, HI, MD, MA, NJ, NY, RI, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Fabrique Nationale Model: High-Power BBL: 4 3/4 inch round Gauge: 9mm Luger Finish: French grey/gold Grips: pearlite Serial Number74C09505 Class: Curio & Relic Handgun

Lot: 425 - Roger Sampson Engraved Miniature Renaissance High-Power Pistol

Roger Sampson Signed Engraved Miniature Belgian Browning Renaissance High-Power Semi-Automatic Pistol Manufactured c. 1990s to early 2000s as an approximately 1/2 scale, non-firing, miniature of the Browning Renaissance High-Power pistol. It features scale recreated Belgian Browning Renaissance pattern floral scroll engraving covering most of the frame and slide, with the front strap signed "R. SAMPSON ENGR. 01" for Master Engraver Roger Sampson. It has properly scaled fixed sights, simulated two-line Fabrique Nationale and Browning markings on the left side of the slide, functional slide catch, magazine release, hammer, thumb safety, and trigger mechanism. The matching visible serial number "003" is marked on the frame, slide, and barrel. Fitted with a pair of pearlite grips and a nickel plated magazine. Manufacturer: None Model: None BBL: 2 3/8 inch round Finish: nickel/gold Grips: pearlite Serial Number003 Class: Other

Lot: 426 - Cased Mauser/Interarms 75th Anniversary Luger Pistol-Carbine

Cased Mauser/Interarms 75th Anniversary Commemorative "Karabiner" Semi-Automatic Luger Pistol-Carbine with Stock Manufactured in 1981 as one of 250 commemorative pistols made in emulation of the Luger 1920 Pistol-Carbine. This commemorative model is on the BATFE Curio & Relic List (Section III, page 43 of the 1972-2025 edition), where it is noted as a curio and relic firearm with NFA exemption. Ramp blade front and four-position notch rear sights, with the Mauser crest on the chamber, gold washed "DWM" on the toggle and model markings on the left side, engraved importer mark and serial number on the right, checkered Schnabel tip forearm, grip panels, and matching numbered stock. Included with the lot is a leather luggage-style case with room for the pistol, accompanying matching numbered stock, and following included accessories; extra magazine, cleaning rod, takedown tool, matching numbered hang tag, certificate and target. Also included is an importer shipping box sized for the case. This pistol is sequentially numbered to the following lot. Note: This item is restricted under various state-level assault weapons bans and cannot be sold or transferred to individuals in IL, CO, or NY. Please check your local laws and regulations prior to bidding. Manufacturer: Mauser Model: Karabiner BBL: 11 3/4 inch round Gauge: 9mm Luger Finish: blue Grips: hardwood Serial NumberK228von250 Class: Curio & Relic Handgun

Lot: 427 - Cased Mauser/Interarms 75th Anniversary Luger Pistol-Carbine

Cased Mauser/Interarms 75th Anniversary Commemorative "Karabiner" Semi-Automatic Luger Pistol-Carbine with Stock Manufactured in 1980 as one of 250 commemorative pistols made in emulation of the Luger 1920 Pistol-Carbine. This commemorative model is on the BATFE Curio & Relic List (Section III, page 43 of the 1972-2025 edition), where it is noted as a curio and relic firearm with NFA exemption. Ramp blade front and four-position notch rear sights, with the Mauser crest on the chamber, gold washed "DWM" on the toggle and model markings on the left side, engraved importer mark and serial number on the right, checkered Schnabel tip forearm, grip panels, and matching numbered stock. Included with the lot is a leather luggage-style case with room for the pistol, accompanying matching numbered stock, and following included accessories; extra magazine, cleaning rod, takedown tool, matching numbered hang tag and target. Also included are two shipping boxes, one sized for the case and another sized to hold two of the first shipping box. This pistol is sequentially numbered to the previous lot. Note: This item is restricted under various state-level assault weapons bans and cannot be sold or transferred to individuals in IL, CO, or NY. Please check your local laws and regulations prior to bidding. Manufacturer: Mauser Model: Karabiner BBL: 11 3/4 inch round Gauge: 9mm Luger Finish: blue Grips: hardwood Serial NumberK229von250 Class: Curio & Relic Handgun

Lot: 428 - Cased Mauser/Interarms 75 Year Anniversary Model 1906 Navy Luger

Cased Mauser/Interarms 75 Year Anniversary Model 1906 Navy Commemorative Parabellum Luger Semi-Automatic Pistol One of 250 manufactured c. 1978, in commemoration of the 1906 Navy Luger semi-automatic pistol. Blade front and two-position notch rear sights, with gold highlighted "DWM" toggle marking and commemorative nomenclature on the left side of the frame. Fitted with straw colored small parts, checkered grips, and a blue finished magazine. Included with the pistol is a brown leather luggage style case, extra magazine, takedown tool, barrel rod, a copy of the book "Luger" by Walter, and matching numbered certificate, warranty card and test target. This pistol is consecutively numbered to the following lot. Manufacturer: Mauser Model: Parabellum BBL: 6 inch round Gauge: 9mm Luger Finish: blue Grips: hardwood Serial NumberKM228von250 Class: Modern Handgun

Lot: 429 - Cased Mauser/Interarms 75 Year Anniversary Model 1906 Navy Luger

Cased Mauser/Interarms 75 Year Anniversary Model 1906 Navy Commemorative Parabellum Luger Semi-Automatic Pistol One of 250 manufactured c. 1978, in commemoration of the 1906 Navy Luger semi-automatic pistol. Blade front and two-position notch rear sights, with gold highlighted "DWM" toggle marking and commemorative nomenclature on the left side of the frame. Fitted with straw colored small parts, checkered grips, and a blue finished magazine. Included with the pistol is a brown leather luggage style case, extra magazine, takedown tool, barrel rod, a copy of the book "Luger" by Walter, and matching numbered certificate, warranty card and test target. This pistol is consecutively numbered to the previous lot. Manufacturer: Mauser Model: Parabellum BBL: 6 inch round Gauge: 9mm Luger Finish: blue Grips: hardwood Serial NumberKM229von250 Class: Modern Handgun

Lot: 430 - Mauser 1902 American Eagle Luger Commemorative Pistol with Case

Mauser Model 1902 American Eagle Luger Commemorative Semi-Automatic Pistol with Case and Box Manufactured in 1982, this was one of 250 commemorative reproductions of the Model 1902 American Eagle Luger, featuring gold highlighted "DWM" marking on the toggle and commemorative nomenclature on the left side of the frame. Included with the pistol is a fine leather luggage style case, matching hand-numbered factory box, extra magazine, barrel rod, takedown tool, matching numbered test target and "weapon passport". Manufacturer: Mauser Model: American Eagle Luger BBL: 4 inch round Gauge: 9mm Luger Finish: blue Grips: walnut Serial NumberAE22963 Class: Modern Handgun

Lot: 431 - Swiss Confederation 700th Anniversary SIG P210 Pistol with Case

Spectacular Swiss Confederation 700th Anniversary Limited Edition SIG Sauer P210 Semi-Automatic Pistol with Case Manufactured c. 1991, in commemoration of the 700th anniversary of the formation of the Swiss Confederation, with this pistol being number "0517" of the limited edition series. Import mark on the bottom of the grip frame. Featuring full niter blue finish on the frame and slide, gold highlighted borders on both sides of the frame with "1291" and "1991" surrounding a Swiss crest on the left and "Confoederatio Helvetica" on the right also highlighted in gold, a gold script "CH" in front of the rear sight, a gold highlighted SIG logo on top of the rear grip strap, gold script "S" and "F" fire control indicators on the left of the frame, and matching gold script "No 0517" serial number on the right of the slide and frame. Fitted with a pair of smooth white synthetic grips with blue Swiss crest inserts. Includes a SIG walnut presentation case with a grey and blue felt interior French fit for the pistol, along with a SIG patch and SIG marked draw string sack. Manufacturer: Sig Model: P 210 BBL: 4 3/4 inch round Gauge: 9mm Luger Finish: blue/gold Grips: synthetic Serial Number0517 Class: Modern Handgun

Lot: 432 - Swiss"125 Jahre" Jubilee Commemorative SIG Sauer JP226 Pistol

Swiss "125 Jahre" Jubilee Commemorative Edition SIG Sauer JP226 Semi-Automatic Pistol with Case Manufactured c. 1985-1986 in commemoration of the 125th anniversary of the founding of Schweizerische Industrie Gesellschaft (SIG), with this example being the 517th produced in the limited series. Import marked on the bottom of the grip frame. Features fixed white dot blade front and notch rear sights, gold color filled "circle/SIG" marking along with "125 Jahre" and "1860-1985" on the left of the slide, the SIG Sauer name and "JP226" model designation marked on the right of the slide, along with Swiss "BP" proofed barrel. Matching "JP0517" serial number on the slide, barrel, and on top of the frame. Fitted with a pair of floral relief carved rosewood grips. Includes a walnut presentation/display case fitted for the pistol, a manual, and a key for the case. Note: This item features a high-capacity magazine which has a capacity above 10 rounds and cannot be sold or transferred to individuals in CA, CT, DC, HI, MD, MA, NJ, NY, RI, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Sig Model: JP226 BBL: 4 3/8 inch round Gauge: 9mm Luger Finish: black/gold Grips: rosewood Serial NumberJP0517 Class: Modern Handgun

Lot: 433 - Factory Engraved Mauser Parabellum Luger Semi-Automatic Pistol

Factory Engraved Mauser Parabellum Luger Semi-Automatic Pistol with Ivory Grips, Case, and Box Manufactured in 1983, this Mauser Luger integrates a number of early style features, such as the wrap-around grip safety and dished toggle knobs, with a fine coin gray finish overall, straw finished small parts, fine scroll engraving, and smooth grips with a blank inscription plate on the left panel. A number of Mausers bearing similar features and decoration are known to have been produced in honor of the IWA Outdoor Classics trade show. Included with the lot are a matching hand-numbered labeled box, leather luggage-style case, extra magazine, barrel rod, takedown tool, matching numbered test target and "waffenpass" logbook listing this pistol by serial number as "graviert" (engraved). Consecutively serial numbered to the following Lot. Manufacturer: Mauser Model: Parabellum BBL: 4 inch round Gauge: 9mm Luger Finish: coin Grips: ivory Serial Number11.015346 Class: Modern Handgun

Lot: 434 - Factory Engraved Mauser Parabellum Luger Semi-Automatic Pistol

Factory Engraved Mauser Parabellum Luger Semi-Automatic Pistol with Ivory Grips, Case, and Box Manufactured in 1983, this Mauser Luger integrates a number of early style features, such as the wrap-around grip safety and dished toggle knobs, with a fine coin gray finish overall, straw finished small parts, fine scroll engraving, and smooth grips with a blank inscription plate on the left panel. A number of Mausers bearing similar features and decoration are known to have been produced in honor of the IWA Outdoor Classics trade show. Included with the lot are a matching hand-numbered labeled box, leather luggage-style case, extra magazine, barrel rod, takedown tool, matching numbered test target and factory "waffenpass" logbook listing this pistol by serial number as "graviert" (engraved), and a reproduction Stoeger/American Eagle label. Consecutively serial numbered to the previous Lot. Manufacturer: Mauser Model: Parabellum BBL: 4 inch round Gauge: 9mm Luger Finish: coin Grips: ivory Serial Number11.015347 Class: Modern Handgun

Lot: 435 - Mauser Model 1902 American Eagle Luger Commemorative with Case

Mauser Model 1902 American Eagle Luger Commemorative Semi-Automatic Pistol with Case and Box Manufactured in 1982 as a commemorative version of the Model 1902 "American Eagle" Luger pistol, featuring gold highlighted "DWM" marking on the toggle and commemorative nomenclature on the left side of the frame. Included with the lot is a matching hand-numbered Mauser box, luggage style case, extra magazine, barrel rod, takedown tool, and matching numbered test target and "waffenpass". Manufacturer: Mauser Model: American Eagle Luger BBL: 4 inch round Gauge: 9mm Luger Finish: blue Grips: walnut Serial NumberAE22971 Class: Modern Handgun

Lot: 436 - Mauser/Interarms 1902 Cartridge Counter Commemorative Luger

Excellent Mauser/Interarms Commemorative Model 1902 Cartridge Counter Luger with Case Manufactured in 1982, this was one of 250 commemorative reproductions of the Model 1902 "Cartridge Counter" Luger, an early variant manufactured for testing by the U.S. government. Gold highlighted "DWM" toggle markings and commemorative nomenclature on the left side of the frame. Included with the pistol is a fine leather luggage style case, extra magazine, barrel rod, takedown tool, and matching numbered test target and "weapon passport". This pistol is consecutively serial numbered to the following Lot. Manufacturer: Mauser Model: 1902 Cartridge Counter BBL: 4 inch round Gauge: 9mm Luger Finish: blue Grips: walnut Serial NumberC228von250 Class: Curio & Relic Handgun

Lot: 437 - Mauser Model 1902 Cartridge Counter Commemorative Luger

Excellent Mauser/Interarms Commemorative Model 1902 Cartridge Counter Luger with Case Manufactured in 1982, this was one of 250 commemorative reproductions of the Model 1902 "Cartridge Counter" Luger, an early variant manufactured for testing by the U.S. government. Gold highlighted "DWM" toggle marking and commemorative nomenclature on the left side of the frame. Included with the pistol is a fine leather luggage style case, extra magazine, barrel rod, takedown tool, matching numbered test target and "weapon passport". This pistol is consecutively serial numbered to the previous Lot. Manufacturer: Mauser Model: 1902 Cartridge Counter BBL: 4 inch round Gauge: 9mm Luger Finish: blue Grips: walnut Serial NumberC229von250 Class: Curio & Relic Handgun

Lot: 438 - Mauser 75 Year Bulgarian Commemorative Luger with Case

Scarce Mauser 75 Year Commemorative Bulgarian Parabellum Luger Semi-Automatic Pistol with Case and Box Manufactured in 1977 as part of a 250 piece run commemorating the Bulgarian Contract Luger pistol. Standard features, with the Bulgarian crest on the chamber, import mark on the right side of the receiver, and "75 Jahre/Parabellum - Pistole/Konigreich Bulgarien" in gold on the left side of the frame. Includes a matching hand-numbered Mauser/Interarms box, leatherette case, extra magazine, cleaning rod, takedown tool, and matching numbered test target and warranty card. This Bulgarian Commemorative is numbered similarly to a Russian Commemorative in the following lot. Manufacturer: Mauser Model: Parabellum BBL: 4 3/4 inch round Gauge: 7.65mm Luger Finish: blue Grips: walnut Serial Number229von250B Class: Curio & Relic Handgun

Lot: 439 - Mauser 70 Year Commemorative Russian Contract Luger with Case

Mauser 70 Year Commemorative Imperial Russian Contract Luger Semi-Automatic Pistol with Case and Box Manufactured in 1977 as part of a 250 piece run commemorating the Russian Contract Luger pistol. Standard features, with the Imperial Russian crest on the chamber, import mark on the right side of the receiver, and "70 Jahre/Parabellum - Pistole/Kaiserreich Russland" in gold on the left side of the frame. Includes a matching hand-numbered Mauser/Interarms box, leatherette case, extra magazine, cleaning rod, takedown tool, and matching numbered test target and warranty card. This Russian Commemorative is numbered similarly to a Bulgarian Commemorative in the previous lot. Manufacturer: Mauser Model: Parabellum BBL: 4 inch round Gauge: 9mm Luger Finish: blue Grips: walnut Serial Number229von250R Class: Curio & Relic Handgun

Lot: 440 - Gold Inlaid "50 Jahre" Walther Model PP Pistol with Case and Box

Gold Inlaid "50 Jahre" Limited Edition Walther Model PP Semi-Automatic Pistol with Case, Box, and Certificate Manufactured in 1979 per the "HK" Ulm date code on the right of the import marked frame, one of a limited edition of 500 pistols produced to commemorate the 50th anniversary of the Model PP. Features fixed blade and notch sights, and gold washed small parts. The slide has gold wire inlaid 50th anniversary commemorative markings on the left side and the gold wire inlaid serial number on the right. Fitted with oak leaf and acorn carved grips. Includes a matching numbered factory certificate of authenticity, a matching numbered shipping box, a hardwood Walther display case, a matching numbered factory test fire target, an extra magazine, and a cleaning rod. This pistol is consecutively serial numbered to the following lot. Manufacturer: Walther Model: PP BBL: 3 3/4 inch round Gauge: 380 ACP Finish: blue/gold Grips: hardwood Serial NumberCW197 Class: Modern Handgun

Lot: 441 - Gold Inlaid "50 Jahre" Walther Model PP Pistol with Case and Box

Gold Inlaid "50 Jahre" Limited Edition Walther Model PP Semi-Automatic Pistol with Case, Box, and Certificate Manufactured in 1979, per the "HK" Ulm date code on the right of the import marked frame, one of a limited edition of 500 pistols produced to commemorate the 50th anniversary of the Model PP. Features fixed blade and notch sights, and gold washed small parts. The slide has gold wire inlaid 50th anniversary commemorative markings on the left side and the gold wire inlaid serial number on the right. Fitted with oak leaf and acorn carved grips. Includes a matching numbered factory certificate of authenticity, a matching numbered shipping box, a hardwood Walther display case, a matching numbered factory test fire target, an extra magazine, and a cleaning rod. This pistol is consecutively serial numbered to the previous lot. Manufacturer: Walther Model: PP BBL: 3 3/4 inch round Gauge: 380 ACP Finish: blue/gold Grips: hardwood Serial NumberCW198 Class: Modern Handgun

Lot: 442 - Mauser 75 Year Commemorative P.08 Luger with Case

Mauser 75 Year Commemorative P.08 Luger Semi-Automatic Pistol with Case and Box Manufactured in 1983, this pistol is one of 250 manufactured to commemorate the P.08 Model Luger semi-automatic pistol. "1983/1908" gold highlighted on the chamber, along with "DWM" on the toggle and commemorative nomenclature on the left side of the frame. Included with the lot is a matching hand-numbered box, brown leather luggage style case, extra magazine, takedown tool, barrel rod, and a matching numbered test target and "waffenpass". This Luger is consecutively serial numbered to the following lot. Manufacturer: Mauser Model: 1908 BBL: 4 inch round Gauge: 9mm Luger Finish: blue Grips: walnut Serial NumberJ.220von250 Class: Modern Handgun

Lot: 443 - Mauser 75 Year Commemorative P.08 Luger with Case

Mauser 75 Year Commemorative P.08 Luger Semi-Automatic Pistol with Case and Box Manufactured in 1983, this pistol is one of 250 manufactured to commemorate the P.08 Model Luger semi-automatic pistol. "1983/1908" gold highlighted on the chamber along with "DWM" on the toggle and commemorative nomenclature on the left side of the frame. Included with the lot is a matching hand-numbered box, brown leather luggage style case, extra magazine, takedown tool, barrel rod, and a matching numbered test target and "waffenpass". This Luger is consecutively serial numbered to the previous lot. Manufacturer: Mauser Model: 1908 BBL: 4 inch round Gauge: 9mm Luger Finish: blue Grips: walnut Serial NumberJ.221von250 Class: Modern Handgun

Lot: 444 - Pre-Ban Russian Izhevsk SVD Dragunov Sniper Rifle with PSO Scope

Highly Desirable Pre-Ban Russian Izhevsk Arsenal SVD Dragunov Semi-Automatic Sniper Rifle with PSO-1 Scope Manufactured by the Izhevsk Arsenal in Russia c. 1976 per the "1976" date on the underside of the receiver. Developed between 1958 and 1963, the "Snayperskaya Vintovka Dragunova" (translated as "Dragunov Sniper Rifle"), also known as the SVD or simply as the "Dragunov", was meant to provide a full-power designated marksman platform for Soviet infantry squads of the time, which were largely reliant on more close-ranged automatic small arms like the Kalashnikov family. Features hooded post front and adjustable tangent rear sights, a bayonet lug on the elongated flash hider, adjustable gas block, along with the Izhevsk Arsenal "triangle/arrow" marking and serial number on the underside of the receiver. Matching visible serial numbers on the gas block, bolt carrier, bolt head, gas cylinder, dust cover, trigger housing, and hammer, along with Belgian proofs on the barrel and receiver. Fitted with a pair of ventilated plastic handguards and a plastic thumb-hole pattern stock with leatherette cheek rest. Topped off with a PSO-1 pattern 4x24 mm scope unit marked "MADE IN/BYELARUS" with illuminated reticle, sun shade, and rubber eye piece. Includes a folding metal bipod attachment on the underside of the receiver and a web sling. Note: This item is restricted under various state-level assault weapons bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MA, MD, NJ, NY, RI, VA, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Izhevsk Model: SVD BBL: 24 1/2 inch round Stock: plastic Gauge: 7.62x54R Finish: black Serial NumberAM-720 Class: Modern Long Gun

Lot: 445 - Wise Lite Arms Model AJM 53 Semi-Automatic Rifle

Wise Lite Arms Model AJM 53 Semi-Automatic Rifle A semi-automatic only copy of the Yugoslavian M53, which was itself a copy of the famed World War II era MG 42 general purpose machine gun, manufactured by Wise Lite Arms of Boyd, Texas. Constructed from a combination of new-made and surplus components, it fires from a closed-bolt. It features folding front and adjustable tangent rear sights, quick change barrel, detachable and foldable bipod, painted hardwood buttstock with wire reinforcement, and an AR-15 pattern trigger pack in the fire control module. Note: This item is restricted under various state-level assault weapons bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MA, MD, NJ, NY, RI, VA, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Wise Lite Arms Model: AJM 53 BBL: 21 1/2 inch round Stock: hardwood Gauge: 7.92 mm Mauser Finish: matte black Serial NumberWLA28-6963 Class: Modern Long Gun

Lot: 446 - Papal Swiss Guard Commemorative Edition SIG Sauer SG550P Rifle

Desirable Papal Swiss Guard Commemorative Edition SIG Sauer SG550P Semi-Automatic Rifle, Serial Number "005" Manufactured in 2023 per the "23" dated proofs on multiple components, with an import mark on the receiver. The included importer letter identifies the rifle as a Swiss Guard Commemorative Edition SIG Sauer SG550P, a semi-automatic commercial version of the SG550 select fire service rifle utilized by the Papal Swiss Guards responsible for safeguarding the Vatican City, with only 20 examples made available. This specific rifle is serialized as "005" of the series. Features hooded blade front and adjustable four-position diopter rear (graduated from 100 to 400 meters) sights with tritium night sight inserts, integral birdcage style flash hider on the barrel, the manufacturer markings on the left side of the receiver, a Swiss "cross in shield" crest marked on the front accessory rail mounting lug on top of the receiver, and bilateral color-coded "S" and "1" fire control indicators on the trigger housing. Matching visible serial numbers on the trigger housing, bolt carrier, and bolt head. Fitted with a ventilated and ribbed green polymer forearm with integrated folding bipod, a ribbed green polymer pistol grip, and green polymer skeletonized folding buttstock with ribbed rubber buttpad. Also includes a gold washed lapel pin, keychain, and badge worn only by the Swiss Guard of the Vatican. Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Sig Sauer AG Model: SG 550P BBL: 20 inch round Stock: synthetic Gauge: 5.56x45mm NATO Finish: grey/phosphate Serial NumberSG-550-005 Class: Modern Long Gun

Lot: 447 - Pre-Ban Swiss SIG AMT Semi-Automatic Rifle with Swarovski Scope

Scarce and Desirable Pre-Ban Swiss SIG AMT Semi-Automatic Rifle with Swarovski Scope Manufactured in Switzerland as a semi-automatic commercial variant of SIG's SG-510-4 select-fire service rifle, the AMT (American Match Target) was imported into the U.S. in relatively small numbers, with an approximate total of 3,000 brought between 1969 to 1989, this example import marked on the trigger housing. Features winged post front and range adjustable peep rear (graduated from 100 to 600 meters) sights, a ported compensating flash hider with integrated rifle grenade spigot launcher on the barrel, folding and swiveling rubber coated metal bipod legs at the front of the ventilated steel barrel shroud, a folding carry handle, "T" shaped non-reciprocating charging handle on the right of the receiver, color coded "S/1" safety markings on the left sides of the receiver and trigger housing, and an integrated folding winter trigger on the right side of the trigger housing. Matching visible "5806" partial serial numbers marked on the bolt, bolt carrier, trigger housing, and buttstock assembly. Fitted with a ribbed polymer pistol grip, a pair of smooth oiled birch handguards, and a birch buttstock with ribbed steel buttplate. Includes a Swarovski ZFM 6x42 mm scope on a quick-detach base that interfaces with the top of the receiver and a leather sling. Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Sig Model: AMT BBL: 19 inch round Stock: hardwood Gauge: 7.62x51mm NATO Finish: blue Serial Number15806 Class: Modern Long Gun

Lot: 448 - Swiss "700 Jahre" Jubilee K31 Rifle in .22 LR with Box

Very Scarce Swiss Confederation "700 Jahre" Anniversary Jubilee Limited Edition Gold Accented K31 Schmidt-Rubin Single Shot Straight Pull Bolt Action Rifle in .22 LR with Box Manufactured c. 1991, one of a limited edition of just 500 single shot rimfire variants of the K31 Schmidt-Rubin straight pull rifle adapted for .22 Long Rifle and embellished by the Association of Swiss Gunsmiths in commemoration of the 700th anniversary of the founding of the Swiss Confederation (1291-1991). Import marked on the rear sight base, very few examples are believed to have been brought into the U.S., with this example being only the third that Rock Island Auction Company has had the pleasure of offering. It features winged blade front and tangent notch rear (standard 7.5 mm graduations) sights, the limited series number "123" over a Swiss "cross-in-shield" crest on top of the receiver ring with both flush gold inlayed, along with "Jubilaums" on the left and "K K-Karabiner" on the right of the receiver ring highlighted in gold. Matching visible "665593" serial numbers on the receiver, bolt, and magazine. Includes Hammerli shipping box, a leather sling, a muzzle cap, and a factory test target marked "10 Schuss 50 Meter/No. 123 Vis." hanging from the trigger guard. Manufacturer: Swiss Model: K31 BBL: 25 5/8 inch round Stock: walnut Gauge: 22 Long Rifle Finish: blue/gold Serial NumberP665593 Class: Modern Long Gun

Lot: 449 - Pre-Ban 1965 Production Curio & Relic Colt AR-15 SP1 Rifle

Excellent Pre-Ban 1965 Production Curio & Relic Colt AR-15 SP1 Semi-Automatic Rifle Manufactured in 1965. Features a range adjustable post front sight on the "A" frame gas block, a windage adjustable dual peep rear sight on the fixed carry handle, a Colt factory triangle "VP" proof along with "M" and "12" on the barrel, the upper receiver without a shell deflector or forward assist, an un-serrated oxide bolt carrier with solid retaining pin, a chromed bolt marked "P", a two-piece buffer, and standard Colt factory roll-marks on the left of the slab-side lower receiver. Fitted with a pair of black synthetic triangular handguards, checkered pistol grip, and smooth fixed stock with a rubberized butt. Includes two extra magazines, cleaning tools, a black web sling, and a manual. Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Colt Model: SP1 BBL: 20 inch round Stock: synthetic Gauge: 223 Remington Finish: black anodized/oxide Serial NumberSP04191 Class: Curio & Relic Long Gun

Lot: 450 - Pre-Ban Chinese Poly Tech AKS-762 Rifle with Box and Accessories

Desirable Pre-Ban Chinese Poly Technologies AKS-762 Semi-Automatic Underfolding Spiker Rifle with Box and Accessories Manufactured c. 1985, with an import mark on the stamped receiver. Features hooded post front and tangent notch rear sights, a triangle "416" factory mark on the left side of the receiver along with the caliber and model designations, and "S/F" marked safety positions. Matching partial serial numbers visible on the bolt and bolt carrier. Fitted with an underfolding spike bayonet, a pair of smooth hardwood handguards with bayonet clearance cut on the underside, a smooth hardwood pistol grip, and a stamped steel underfolding buttstock. Includes a faintly matching numbered shipping box, two extra magazines, a web sling, plastic oiler, cleaning kit, and manual. Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Poly Technologies Inc Model: Aks 762-Rifle BBL: 16 1/4 inch round Stock: metal Gauge: 7.62x39mm Finish: blue Serial NumberPF85-762-1230 Class: Modern Long Gun

Lot: 451 - Pre-Ban Belgian FN FALO Heavy Barrel FAL Rifle with Accessories

Desirable Pre-Ban Belgian Fabrique Nationale FALO Heavy Barrel FAL Semi-Automatic Rifle with Transit Chest and Accessories Manufactured c. 1980s as a commercial variant of the FN "FALO" (light machine gun variant of the FAL), which sports a heavier barrel profile, muzzle mounted folding bipod, and a beefier handguard profile. Import marked receiver. It features winged post front and adjustable peep rear sights, a ported muzzle device pinned to the heavy profile barrel with integrated folding steel bipod, an adjustable gas system, a right-side folding wire carry handle, standard FN factory markings on the right of the type 3 receiver with the caliber designation ".308 MATCH" on the left side, and "S/R" marked safety positions. Matching partial serial numbers on the bolt and bolt carrier. Fitted with an enlarged grooved walnut handguard, a smooth plastic pistol grip, and a fixed walnut buttstock with folding steel shoulder support plate. Includes a green painted hardwood transit chest fitted for the rifle marked "CHEST FAL 7.62", containing 9 extra magazines, a magazine stripper clip feed adapter, a web sling, and a cloth magazine bandoleer. Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Fabrique Nationale Model: FAL BBL: 20 1/2 inch heavy round Stock: walnut Gauge: 308 Winchester Finish: black Serial Number2506297 Class: Modern Long Gun

Lot: 452 - Pre-Ban German H&K HK 91 Rifle with Hardwood Furniture

Pre-Ban German Heckler & Koch HK 91 Semi-Automatic Rifle with Desirable Hardwood Furniture Manufactured in 1981 per the "IB" (81) date code marked on the left side of the magazine well, with an importer mark on the right side. Features hooded blade front and four position diopter peep rear sights, a birdcage pattern flash hider on the "IBMC" marked barrel, "IB" marked bolt and bolt carrier, and color coded "0/1" selector marking on the shelf pattern trigger housing. Fitted with a ventilated and finger grooved hardwood handguard, a finger grooved black plastic pistol grip, and a fixed hardwood buttstock with ribbed polymer butt. Includes an extra textured polymer handguard, an extra triangular plastic handguard with folding metal bipod attachment, and an extra fixed plastic buttstock assembly. Magazine absent. Note: This item is restricted under various state-level assault weapons bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MA, MD, NJ, NY, RI, VA, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Heckler & Koch GmbH Model: HK 91 BBL: 18 inch round Stock: hardwood Gauge: 308 Winchester Finish: black Serial NumberA041344 Class: Modern Long Gun

Lot: 453 - Pre-Ban German Heckler & Koch HK 94 Semi-Automatic Rifle

Pre-Ban German Heckler & Koch HK 94 Semi-Automatic Rifle Manufactured in 1985 per the "IF" (85) Ulm antler date code on top of the receiver. Features hooded post front and adjustable diopter peep rear sights, "IE CA" marked barrel, "IF" marked bolt and bolt carrier, and color coded "0/1" safety indicators on the trigger housing. Fitted with an alloy shroud around the exposed portion of the barrel, a textured triangular polymer handguard, a textured polymer pistol grip, and telescoping metal stock with a checkered polymer butt. Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Heckler & Koch GmbH Model: HK94 BBL: 16 inch round Stock: metal Gauge: 9mm Luger Finish: black Serial Number7301 Class: Modern Long Gun

Lot: 454 - Pre-Ban Chinese Min Shan AKS Underfolding Rifle with Bayonet

Scarce Pre-Ban Chinese Min Shan Factory AKS Semi-Automatic Underfolding Rifle with Bayonet and Box Manufactured and imported c. 1980s as a semi-automatic commercial variant of the Chinese Type 56 select-fire rifle, with an import mark on the stamped receiver. Features hooded post front and tangent notch rear sights, threaded barrel with slant muzzle device, "ALTERATIONS TO THIS FIREARMS ARE UNSAFE AND ILLEGAL" stamped on the left of the dust cover, the manufacturer markings on the left of the receiver, and "S/F" safety position markings on the right of the receiver. Matching numbers on the trunnion, top cover, recoil spring guide, bolt carrier, and gas cylinder. Fitted with a pair of smooth green Bakelite handguards, a ribbed green Bakelite pistol grip, and an under-folding steel buttstock. Includes a Clayco Sports shipping box, three extra magazines (one incompatible with the rifle), bayonet with sheath, a web sling, oiler, and cleaning kit. Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Min Shan Model: AKS BBL: 16 inch round Stock: metal Gauge: 7.62x39mm Finish: blue Serial Number103342 Class: Modern Long Gun

Lot: 455 - Pre-Ban Belgian Fabrique Nationale FAL Rifle with Bipod

Excellent Pre-Ban Belgian Fabrique Nationale FAL Semi-Automatic Rifle with Bipod Manufactured c. 1980-1988 as a semi-automatic commercial variant of FN's select-fire "Fusil Automatique Leger" (FAL) rifle, with an import marked barrel. Features winged post front and sliding adjustable peep (graduated from 200 to 600 meters) rear sights, flash hider with bayonet lug, hand-adjustable gas system, and a folding wire carry handle. The left side of the type 3 receiver is marked ".308 MATCH". Matching "14656" assembly numbers on the receiver, bolt, and bolt carrier. Fitted with a ventilated plastic handguard, smooth plastic pistol grip with oiler stowed in the bottom, and fixed oiled walnut buttstock with trap-door steel buttplate. Includes a detached folding metal bipod with spiked feet. Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Fabrique Nationale Model: FAL BBL: 20 1/2 inch round Stock: walnut Gauge: 7.62x51mm NATO Finish: black/phosphate Serial Number2500111 Class: Modern Long Gun

Lot: 456 - Pre-Ban Italian Franchi SPAS-12 Shotgun with Box

Desirable Pre-Ban Italian Franchi SPAS-12 Semi-Automatic and Slide Action Shotgun with Box Manufactured in 1987 per the boxed "AS" (87) date code on the underside of the receiver. Introduced in 1979, the SPAS-12 (Special Purpose Automatic Shotgun) is an Italian designed dual action platform with the ability to swap between semi-automatic and pump action modes of fire, with the inclusion of the pump action intended to allow the platform to reliably cycle specialized low-pressure loads like bean bag or tear gas rounds. Features fixed blade front and peep rear sights, 2 3/4 inch chamber, stamped metal heat shield, and import mark on the receiver. Fitted with a ribbed polymer slide and pistol grip, along with a folding stamped steel buttstock with arm support brace. Includes a Franchi box with a hand written matching numbered end label, and a tube limiter. Note: This item is restricted under various state-level assault weapons bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MA, MD, NJ, NY, RI, VA, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Franchi L Model: Spas12 BBL: 21 1/2 inch round Stock: metal Gauge: 12 Finish: black/phosphate Serial NumberAA11217 Class: Modern Long Gun

Lot: 457 - Pre-Ban Argentine F.M.A.P. FSL Semi-Automatic Rifle

Pre-Ban Argentine F.M.A.P. FSL Semi-Automatic Rifle Manufactured c. 1970s-1980s, with an import mark in the magazine well. Features winged post front and range adjustable peep rear sights, a ported muzzle device threaded to the barrel, and adjustable gas system, the model and caliber designation on the left of the receiver with "F.M.A.P. "DM" - ROSARIO/INDUSTRIA ARGENTINA" on the right side, and "S/R" marked safety positions. Non-matching serial numbers on components. Fitted with a right side folding wire carry handle, a pair of ventilated triangular plastic handguards, a smooth plastic pistol grip, and fixed plastic buttstock with rubber butt. Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: D.G.F.M. - (F.M.A.P) Model: F.S.L. BBL: 21 inch round Stock: plastic Gauge: 7.62x51mm NATO Finish: black/phosphate Serial Number02807 Class: Modern Long Gun

Lot: 458 - Tactical Operations/Surgeon 1581 "TAC-70" Sniper Rifle with Case

Desirable Tactical Operations/Surgeon Rifles Model 1581 "TAC-70" Bolt Action Sniper Rifle in .338 Lapua Magnum with Case Manufactured c. early 21st century, subsequently built up to current configuration by Michael Rescigno of Tactical Operations in Beverley Hills, California. Made without iron sights, it features a threaded muzzle on the Tactical Operations heavy profile barrel marked "TAC-70" and ".338/LAPUA", an integrated Picatinny rail on top of the receiver marked with the manufacturer address and model designation, a Surgeon AICS pattern magazine well, and a spiral fluted bolt body with a matching partial serial number on the bolt handle. The primary metal components are finished in a green Cerakote. Fitted with a textured green colored fiberglass stock with added aggressive rubberized texturing on the forearm and grip, two QD sling sockets on the left side, an adjustable cheek rest, and spacer adjustable buttpad. Includes a Pelican iM3300 hard case, and extra pair of buttpad spacers, and a pair of scope rings. Manufacturer: Surgeon Rifles Model: 1581 BBL: 28 inch heavy round Stock: synthetic Gauge: 338 Lapua Magnum Finish: green Cerakote/black Serial NumberXL01266 Class: Modern Long Gun

Lot: 459 - Tactical Operations/Remington Model 700 "Tango 51" Sniper Rifle

Desirable Tactical Operations/Remington Model 700 "Tango 51" Bolt Action Sniper Rifle Receiver manufactured c. 2000s, subsequently built up to current configuration by Michael Rescigno of Tactical Operations in Beverley Hills, California. Made without iron sights, it features a threaded muzzle on the Tactical Operations medium taper barrel marked "Tango 51" and ".308", standard Remington factory markings on the receiver, a pair of "22" marked Picatinny rails, an adjustable trigger, and an enlarged knob on the bolt handle with two matching partial serial numbers marked on the underside of the bolt body. Most of the primary metal components are finished in a green Cerakote. Fitted with a textured dark grey colored fiberglass stock with added aggressive rubberized texturing on the forearm and grip. Includes a black and green nylon cheek riser fastened to the butt and a hand matching numbered cardboard test target signed by Mike Rescigno and dated "10-17-07". Manufacturer: Remington Arms Inc Model: 700 BBL: 21 inch round Stock: synthetic Gauge: 308 Winchester Finish: green Cerakote/black Serial NumberG6641563 Class: Modern Long Gun

Lot: 460 - BAT Machine Co. Model HR Custom Target Rifle in .248 Win.

British Proofed BAT Machine Co. Model HR Bolt Action Custom Target Rifle in .284 Winchester Manufactured in the U.S. c. early 21st century, with British proofs on the receiver and barrel and an import mark on the barrel. Produced without iron sight provisions, it features a "284 WIN 0.318 NK NON STD" marked and threaded Benchmark barrel, a BAT Machine Co. HR model action with integrated Picatinny rail on top, a spiral fluted bolt body, and Jewel adjustable trigger. Fitted to a KRG Whiskey-3 Gen IV alloy chassis system with an integrated ARCA interface on the underside of the forend and a side folding metal buttstock with adjustable cheek riser and buttpad. Includes a Fortmeier folding metal bipod fitted to the forend and a generic plastic hard case. Manufacturer: BAT Machine Co Inc Model: HR BBL: 28 inch heavy round Stock: metal Gauge: 284 Winchester Finish: black Serial NumberHR1233 Class: Modern Long Gun

Lot: 461 - Italian Victrix Armaments Gladio Sniper Rifle with Case

Italian Victrix Armaments Gladio Bolt Action Sniper Rifle with Case Manufactured in 2015, with an import marked receiver. Produced without iron sights, it features a three-port muzzle brake threaded (loosely) to the barrel, a three-lug spiral fluted bolt body, an adjustable trigger, and Italian proofs on the right of the receiver. Fitted with an alloy chassis system that has a free-floating alloy handguard with Picatinny rail on top along with detachable Picatinny segments and a "handle bar" pattern fore-grip on the underside, a rubberized Ergo pattern pistol grip, and side folding metal buttstock assembly with adjustable cheek riser and butt pad. Includes an un-numbered Victrix Armaments marked plastic hard case. Manufacturer: Victrix Armaments Model: Gladio BBL: 27 inch heavy round Stock: metal Gauge: 6.5 Creedmoor Finish: black Serial NumberM16104 Class: Modern Long Gun

Lot: 462 - Knight's Manufacturing Co. SR-25 EC Enhanced Carbine Rifle

Desirable Knight's Manufacturing Co. SR-25 EC Enhanced Carbine Semi-Automatic Rifle Manufactured c. 2010s out of the facility in Titusville, Florida, this variant was offered by Knight's Manufacturing Co. (also known as Knight's Armament Co.) as the SR-25 EC Enhanced Carbine (P/N: 30365) featuring a 16 inch chrome moly barrel, a free-floating Knight's URX quad rail handguard with integral flip-up front sight, Picatinny rail segments on the top, sides, and bottom, and an adjustable LMT buttstock. The SR-25 was originally designed as a designated marksman rifle in collaboration between C. Reed Knight, Jr. and Eugene Stoner (inventor of the AR-10 and AR-15) starting in 1989 into the early 1990s. The rifle also has a Knight's 7.62 mm pattern birdcage flash hider, a Knight's quick-detach suppressor interface integral with the gas block, a flip-up iron peep rear sight, ambidextrous magazine release buttons and safety levers, and an A2 pattern checkered polymer pistol grip. Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Knight's Manufacturing Co Model: Sr 25-Rifle BBL: 16 inch round Stock: synthetic Gauge: 7.62x51mm NATO Finish: black Serial NumberKM110168 Class: Modern Long Gun

Lot: 463 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 464 - Barrett MRAD Sniper Rifle with Scope, BORS 2.0 System, and Case

Barrett Firearms Mfg. Co. MRAD Bolt Action Sniper Rifle with Nightforce Scope, Barrett BORS 2.0 Range System, and Case Designed in 2009 by Chris Barrett. Manufactured without iron sight provisions, it features a two-port muzzle brake threaded to the ".338 LM 1-9.4" marked straight fluted barrel, a free floating handguard integrated with the upper receiver along with a monolithic Picatinny rail spanning the top marked "20 MOA", the manufacturer markings on the left of the lower receiver, "F/S" marked fire controls, and a side folding alloy buttstock with adjustable cheek piece and butt pad. Fitted with a Nightforce NX5 8-32x56 mm scope equipped with a Barrett Optical Ranging System (BORS) 2.0 automatic elevation adjustment ballistics computer, an Atlas folding and adjustable metal bipod, a Magpul MOE pistol grip, and one Picatinny rail segment on the forend. Includes a black Pelican 1750 series hard case fitted for the rifle and an extra magazine. Manufacturer: Barrett F A Mfg Co Model: MRAD BBL: 25 inch fluted Stock: metal Gauge: 338 Lapua Magnum Finish: tungsten Cerakote/black Serial NumberAJ003051 Class: Modern Long Gun

Lot: 465 - Belgian FN Herstal/FNH USA SCAR 17S Rifle with Trijicon Scope

Belgian FN Herstal/FNH USA SCAR 17S Semi-Automatic Rifle with Trijicon Scope Manufactured c. 2009-2025. Features a folding hooded post front sight on the adjustable gas block and a folding adjustable peep rear sight mounted to the monolithic Picatinny rail on top of the receiver, a PWS FSC pattern muzzle brake on the "7.62X51 1:12" marked barrel, two accessory Picatinny rails on the sides of the forend along with another on the bottom, the importer and manufacturer markings along with the model and caliber designations on the left side of the receiver, and "1/S" marked indicators for the ambidextrous safety levers. Fitted with a "bullet button" pattern fixed magazine release, a A2 pattern polymer pistol grip, and an adjustable side-folding buttstock. Topped off with a Trijicon 5-20x50 mm dual illumination scope (green) on a Trijicon branded Bobro quick-detach mount. Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: FN Herstal Model: SCAR 17S BBL: 16 inch round Stock: plastic Gauge: 7.62x51mm NATO Finish: black/phosphate Serial NumberHC30173 Class: Modern Long Gun

Lot: 466 - Pre-Ban Israeli IMI/Action Arms Model 329S Galil Rifle with Box

Desirable Pre-Ban Israeli IMI/Action Arms Ltd. Model 329S Galil Semi-Automatic Rifle with Box Manufactured in Israel c. 1980s, with an import mark on the receiver. Features a hooded post front sight and flip peep rear sight with built-in flip up night sight attachments, ported muzzle device threaded to the barrel, and "F" and "S" marked fire controls. Matching partial serial number on the rear sight base. Fitted with a pair of ribbed polymer handguards, a smooth polymer pistol grip, and a side folding tubular metal buttstock with rubber butt. Includes an Action Arms Galil shipping box and five extra magazines (four sealed in wax paper). Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: I.M.I. (Israeli) Model: 329S BBL: 18 1/2 inch round Stock: metal Gauge: 308 Winchester Finish: black/phosphate Serial NumberAAL-2099882 Class: Modern Long Gun

Lot: 467 - Barrett Firearms Mfg. Inc. REC7 Rifle with Trijicon ACOG Scope

Barrett Firearms Mfg. Inc. REC7 Semi-Automatic Rifle with Trijicon ACOG Scope Introduced in 2004. Features an adjustable gas block for the short-stroke gas piston, a "bullet button" magazine catch, A.R.M.S. free-floating handguard, an A2 pattern polymer pistol grip, and a Magpul MOE telescoping polymer buttstock. Topped off with a Trijicon TA31 4x32 mm dual illumination ACOG scope with green reticle. Includes a black Barrett soft case. Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Barrett F A Mfg Co Model: REC7 BBL: 16 inch round Stock: plastic Gauge: 5.56x45mm NATO Finish: black anodized/phosphate Serial NumberAF000097 Class: Modern Long Gun

Lot: 468 - Colt AR-15 A2 Delta H-BAR Sporter Rifle with Scope and Case

Colt AR-15 A2 Delta H-BAR Sporter Semi-Automatic Rifle with Scope and Case Introduced in 1987, with this example produced c. 1989. Features a winged post front sight on the "A" frame gas block with bayonet lug, an adjustable flip peep rear sight on the "C/M" marked fixed carry handle upper receiver with shell deflector and forward assist, an A2 birdcage flash hider fitted to the "C MP 5.56 NATO 1/7 HBAR" marked barrel, "MPC" marked phosphate bolt, "C" marked and serrated semi-automatic profile phosphate bolt carrier, along with the model and caliber designations on the left of the un-fenced lower receiver's magazine well. Fitted with a pair of ribbed black plastic handguards, a black plastic A2 pistol with Colt Delta stickers, an a fixed synthetic buttstock with an attached Rampant Colt marked polymer cheek riser and a checkered plastic trap-door buttplate. Topped off with a Tasco 3-9x scope mounted to a Colt branded carry handle Picatinny rail adapter. Includes an Aluma-Max Supreme hard case with a matching hand-numbered end label, a black leather sling, and a manual. Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Colt Model: AR-15 A2 HBAR Sporter BBL: 20 inch round Stock: synthetic Gauge: 223 Remington Finish: anodized/phosphate Serial NumberSP233238 Class: Modern Long Gun

Lot: 469 - Turnbull Manufacturing Co. Casehardened TAR-15 Rifle

Turnbull Manufacturing Co. Casehardened TAR-15 Semi-Automatic Rifle Manufactured c. early 21st century, without iron sight provisions. Features a M4 carbine profile barrel marked "DPMS 5.56 1-9" on the underside and "CHROME-LINED" on top with a ported compensator on the muzzle, a carbine length gas system with cut gas block, "D" marked phosphate bolt, phosphate bolt carrier, along with distinct hardened steel upper and lower receivers with Turnbull's casehardened finish. The upper receiver lacks a dust cover or forward assist, and the lower receiver is marked with the model and caliber designations on the left of the magazine well. Fitted with a "bullet button" pattern fixed magazine release, a pair of smooth walnut handguards, a finger grooved walnut pistol grip, and smooth fixed walnut buttstock with rubber butt. Note: This item is restricted under various state-level assault weapons bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MA, MD, NJ, NY, RI, VA, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Turnbull Model: TAR-15 BBL: 16 inch round Stock: walnut Gauge: 5.56x45mm NATO Finish: casehardened/phosphate Serial NumberTAR1500078 Class: Modern Long Gun

Lot: 470 - Limited Edition SIG Sauer Inc. SG 551 Semi-Automatic Rifle

Desirable Limited Edition SIG Sauer Inc. SG 551 Semi-Automatic Rifle Manufactured c. early 21st century, one of a limited edition of 250 rifles produced utilizing some original Swiss components from SIG SG 551 rifles initially imported specifically for U.S. Government and law enforcement use. Features folding blade front and peep rear sights, an aluminum Picatinny rail spanning the top of the receiver, the manufacturer markings on the left of the receiver, and ambidextrous safety levers on the matching numbered trigger housing with color-coded indicators. Fitted with a pair of ribbed and ventilated polymer handguards, a ribbed polymer pistol grip, and side-folding polymer buttstock. Magazine absent. Note: This item is restricted under various state-level assault weapons bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MA, MD, NJ, NY, RI, VA, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Sig Sauer, Inc Model: SG 551 BBL: 16 inch round Stock: plastic Gauge: 5.56x45mm NATO Finish: grey/phosphate Serial NumberUS410923 Class: Modern Long Gun

Lot: 471 - Pre-Ban Smith Manufacturing "Smith LTD" M-14 Rifle

Pre-Ban Smith Manufacturing "Smith LTD" M-14 Semi-Automatic Rifle Manufactured by Smith Manufacturing of Holland, Ohio, the "Smith LTD" receivers were manufactured via investment casting and finished out by Ron Smith (a principal of Smith Manufacturing and Georgia Gun Trader of Ringgold, Georgia) using mil-spec components c. 1987-1988, primarily for sale to shooters at the Camp Perry matches, with this example made in 1988 per a consignor provided data sheet. Features "NM 062" marked winged blade front sight on the flash hider with bayonet lug, "M" graduated adjustable peep rear sight assembly with "NM/2A" marked base, a "NM" marked Canadian Arsenal barrel, "TRW ZA" bolt, "TRW" operating rod, and a "TRW" trigger housing with a WWII era M1 Garand "-5 SA" hammer. Fitted with a brown ribbed polymer handguard and checkered polymer M21 pattern stock with adjustable cheek piece, with both the handguard and stock wearing tan spray paint camouflage. Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Smith Manufacturing Model: M-14 BBL: 22 inch round Stock: polymer Gauge: 7.62x51mm NATO Finish: parkerized/tan spray paint Serial Number0237 Class: Modern Long Gun

Lot: 472 - Pre-Ban A.R. Sales Co. Mark IV Semi-Automatic Rifle

Pre-Ban A.R. Sales Co. Mark IV Semi-Automatic Rifle Manufactured in 1976, per the included matching numbered consignor provided data sheet, by A.R. Sales Company of El Monte, California, utilizing a new made receiver and surplussed military components. The Mark IV rifle was an early competitor against the Springfield Armory Inc. M1A as a semi-automatic variant of the U.S. M14, with a total of only 225 Mark IV rifles being completed as discussed in "M14 Rifle History and Development" by Lee Emerson. Features a winged blade front and adjustable peep rear sights, a flash hider with bayonet lug on the "SAK" marked and "-2-76-" dated barrel also marked "NM", "TRW ZG" marked bolt, "SAK/15" operating rod, and a "7267030 SA" trigger housing with a WWII era M1 Garand "-7 SA" hammer and "SA" safety. Fitted with a ribbed brown plastic handguard, a USGI M14 pattern walnut stock with selector cutout, "DoD eagle" and circled "P" stamps, and a hinged steel buttplate. Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: AR Sales Model: Mark IV BBL: 22 inch round Stock: walnut Gauge: 308 Winchester Finish: parkerized Serial Number00227 Class: Modern Long Gun

Lot: 473 - Unavailable

This item is not available for online bidding, please contact auction house for details.

Lot: 474 - Brazilian Imbel FAL Semi-Automatic Rifle with Bayonet

Brazilian Imbel FAL Semi-Automatic Rifle with Bayonet Manufactured in 2004 per the "2004" mark on the magazine well of the import marked receiver. Features hooded post front and adjustable peep rear sights, a ported muzzle device threaded to the barrel, an adjustable gas system, a right side folding wire carry handle, the caliber designation on the left of the receiver with the manufacturer's marking on the right side, and "S/R" safety position markings. Non-matching serial numbers on the lower frame, bolt, and bolt carrier. Fitted with a pair of ventilated triangular plastic handguards, a smooth plastic pistol grip, and fixed plastic buttstock with rubber butt. Includes a nylon sling and a Brazilian pattern FAL bayonet with plastic sheath. Note: This item is restricted under various state-level assault weapon as well as high capacity magazine bans and cannot be sold or transferred to individuals in CA, CO, CT, DC, DE, HI, IL, MD, MA, NJ, NY, RI, VA, VT, or WA. Please check your local laws and regulations prior to bidding. Manufacturer: Imbel Model: FAL BBL: 18 inch round Stock: plastic Gauge: 7.62x51mm NATO Finish: black Serial NumberFAL141297 Class: Modern Long Gun