SN 193124. Cal 38 WCF (38-40). Nickel finish with 4-3/4" bbl, full front sight and 2 line address, marked on left side "(BISLEY MODEL) 38 W.C.F.". Left side of frame has 2 line 3 Patent dates and Rampant Colt in a circle. Mounted with 2-pc pearl grips with raised carved spread-winged eagle on left side. Engraving appears to be factory from the Cuno Helfricht shop. Engraving consists of about C coverage foliate arabesque patterns with pearled background and Mr. Helfricht's trademark sunbursts on the recoil shield & loading gate. Top of the backstrap, around the hammer slot is engraved in his trademark fan pattern with geometric patterns down the backstrap, on the buttstrap & trigger bow. Matching patterns to the frame extend up both sides of the bbl and around the address. Top strap has leaf & vine patterns with a snake pattern in top gullet of ejector housing. Cylinder is engraved with Mr. Helfricht's trademark alternating patterns on the lands between the flutes. Accompanied by a Colt Factory letter which identifies this revolver in caliber 44 with 4-3/4" bbl, nickel finish, type of stocks not listed, factory engraved and shipped to Hibbard, Spencer, Bartlett & Co. Chicago, IL February 22, 1900 in a one gun shipment. Also accompanied by an unmarked money/cartridge belt that is 34" with a replaced tongue billet which has extended the length by about 3". Belt is made of 2 pieces of fine russet brown leather, 2-5/8" wide with tooled patterns and 41 sewn-on cartridge loops, Buckle billet is originally sewn on with a single rivet with a brass D-ring buckle. The belt is mounted with a fine, fully tooled double loop, left hand holster marked on the inside of the skirt "T.W. MCDONALD / LEAD, SO. DAK.". This rare rig being left-handed with a left hand pearl grip leads one to believe that it is an orig set. According to Colt Peacemaker Encyclopedia, Cochran there were fewer than 60 Bisley revolvers factory engraved of which, at the time of the printing only 54 were known. CONDITION: Fine. Overall retains about 98-99% restored nickel finish with only slight muzzle edge wear on the left side and tip of the ejector housing. There is a small area of pitting under the finish on the cylinder. Grip has a small chip at the frame on the left side and a couple other tiny chips, otherwise is sound showing great fire & color. Mechanics are crisp, strong, sharp bore with fine pitting. Belt has a somewhat crackled surface with one broken cartridge loop. Holster shows moderate to heavy wear on the loops & toe and shows a somewhat worn dark patina. Altogether a fine rig. 51619-2 JRL C&R

Accepted Forms of Payment:

American Express, Discover, MasterCard, Money Order / Cashiers Check, Personal Check, Visa, Wire Transfer

Shipping

Our shipping department here at James D. Julia, Inc. can package and ship most items anywhere in the world. Our experienced team uses proven packing methods to ensure that your purchases arrive safely. We use Federal Express as our preferred shipper, however we are happy to accommodate just about any request you may have including utilizing specialty pack & ship companies.

It is the purchaser's sole responsibility to identify and obtain any necessary export, import, firearm, endangered species or other permit for lots purchased. Delay or failure to obtain permits or licenses or contravening laws denying consummation does not relieve the buyer of paying for the item and obtaining title to the item.

Please allow 14-21 days from the time your payment has cleared for your purchases to ship. Items paid for by personal or business check will be held for 10 days before being released to the shipping department.
We may refuse to insure or ship items we deem too fragile or a shipping risk. We are not responsible for damage to picture frames in shipping.
Costs for shipping are:

· Shipping Charge: The cost is as per shipper's rate scales.
· Insurance: The charge for insurance on domestic shipments is $0.75 per $100 value (e.g. a $200 item costs $1.50 for insurance). The insurance charge on international shipments is $1.50 per $100 value
· Packaging Materials: We charge for the packing materials used including boxes, packing materials, and labeling materials.
· Labor Charge: Labor rate for shipping is billed at $38.00/hour. A minimum charge is for fifteen minutes.

by James D. Julia
April 11, 2017 10:00 AM EDT
203 Skowhegan Road
Fairfield, ME, US 04937

James D. Julia

You agree to pay a buyer's premium of 23% and any applicable taxes and shipping.

View full terms and conditions

Bid Increments
From: To: Increments:
$0 $249 $25
$250 $499 $50
$500 $999 $100
$1,000 $4,999 $250
$5,000 $9,999 $500
$10,000 $19,999 $1,000
$20,000 $49,999 $2,500
$50,000 $99,999 $5,000
$100,000 + $10,000