Tractors - Trucks - Implements - Shop Equipment

REGISTER AND BID HERE

- Case 580 backhoe loader with front bucket, rear excavator attachment, and enclosed cab. Hobbs hour meter (1913.1 hours). Starts, but otherwise mechanically unknown condition

- Massimo UTV (686CC, 2016), 67 actual miles

- Old skid steer, inoperable, no brand, motor components missing

- 2006 Ponderosa stock trailer with tack and living area. Window air unit mounted under sleeping quarter

- 1986 Honda Gold Wing GL1200

- 2002 Suzuki VL800 Intruder Volusia

- Single axle trailer, appears homemade

- Plastic watering trough

- Davey Jet-Flo portable gasoline powered air compressor

- Farm Force by SpeeCo 3-point hitch post hole digger with auger bit and PTO driveshaft

- Allis-Chalmers WD or WD45 vintage row-crop tractor, circa late 1940s–50s, parts/restore project

- Vermeer round baler, Pella Iowa — Patent No. 3723197 — likely a 605 series from the late 1970s–80s

- John Deere 510-D backhoe loader, Serial No. 260274T, built at Deere's Dubuque, Iowa works. Full backhoe with bucket on the rear, front dozer blade, and ROPS canopy all present; backhoe dipper stick stamp reads TA1338 J.D.N, and the frame carries a secondary stamp reading approximately MN 10-41799

- Homemade single axle trailer. NO TITLE

- Five curved moldboard bottoms with coulter discs intact, full-length toolbar frame, depth-control gauge wheel on the hitch end, and transport wheel visible

- Heavy-duty tandem rear axle assembly with dual wheels and tires, likely from a Class 6–8 truck or semi

- Heavy-duty air ride drop axle (tag/pusher axle) assembly, likely from a semi-trailer or heavy truck

- 5-bottom moldboard plow, pull-type with hydraulic cylinder and dual transport wheels

- Bumper-pull flatbed equipment trailer, approximately 18–20 ft, tandem axle, with fold-down rear ramps and diamond-plate toolbox. Wood deck, tandem axle with tires, pintle/ball hitch, D-ring tie-downs along the frame, and an aluminum diamond-plate toolbox included. NO TITLE

- Homemade trailer, contents not included. NO TITLE

- 2003 goose neck flatbed equipment trailer, 20 ft, tandem axle, with fold-down rear ramps and diamond-plate toolbox, Tandem axle with 750x16 tires, wood deck, gooseneck hitch with adjustable coupler and safety chains, diamond-plate fenders, fold-down rear ramps, and running lights all present

- 1989 Chevrolet C6D042 Conventional Cab flatbed truck 6.0L V8 4x2 gas

- New Holland PTO-driven manure spreader, pull-type, single axle — likely a Model 30 or similar vintage unit, Box with slat-chain apron floor, rear beater assembly, PTO driveline hitch, single axle with original tires, and the apron chain and floor slats are all visible and present.

- scrap loader arms

- Front-end loader bucket and mounting frame assembly, bucket approximately 6–7 ft wide, no brand markings visible, Includes the bucket with intact cutting edge, tilt linkage with hydraulic cylinder rod, and the full loader boom/mount frame

- red bush hog

- Old bush hog

- 3pt hay spear with ball mount on top

- 96" grader box

- 10' bush hog, red

- 7 tine subsoiler

- Trailmobile semi trailer (approximately 53-foot dry van, tandem axle). NO TITLE

- 16' tandem axle flat trailer, wood bed. NO TITLE

- 16' tandem axle flat trailer with drop down ramps. NO TITLE

- tri-axle flat trailer with drop down ramps, pintle hitch, tool box. NO TITLE

- DOES NOT RUN Chevrolet Silverado Z71 extended cab pickup truck (GMT400 generation, 4x4, 205,079 miles)

- Ford F-450 Super Duty Flatbed Truck

- 3 pt hay spear

- 3 pt hay spear with ball welded to top

- Front loader hay spear

- Allis Chalmers D17 tractor with canopy

- 1999 Ford F-350 SD 7.3L V8 Diesel, parts truck only

- enclosed cab model 6701, 6168 hours showing

- 777 hours showing

- 1984 Peterbilt cabover semi truck tractor, single axle configuration, sleeper cab, odometer 125018 miles, engine hours 4912.6, Talladega Series 915 air ride seat, Cobra CB radio

- Massey Ferguson 245 utility tractor, 2WD, Perkins AD3.152 3-cylinder diesel, ROPS canopy, with Bush Hog 2845 QT loader, serial 9A343356, likely early 1980s, bucket included 3287 hours showing

- CUMMINS SWAP - Ford F-350 Super Duty crew cab dually pickup truck, fuel transfer tank with manual rotary hand pump, toolbox, spare tire, Lariat leather interior with front bucket seats, center console, and rear bench seat.

- Ford F-350 Super Duty crew cab dually pickup truck, 4x4, long bed, diesel engine, 194,800 miles, aftermarket wheels, running boards, tow mirrors, aftermarket exhaust tip, bug deflector, cab lights, LED light bar, tow hooks, quilted seat covers, steering wheel cover, rubber floor mats, air fresheners, Duralast battery, spray-in bed liner, crossover toolbox, wooden board, steel fuel transfer tank with hand pump and inline fuel filter

- Freightliner 70 Business Class truck, Cummins motor

- 1997 Chevrolet 1500, black

- Fork Extensions

- Horse Buggy, no wheels

- 5 - 5/16 20ft G70 transport chains. 2 - 5/16 short chains. 3 snap binders/load binders.

- Dura Heat kerosene forced air heater, 180,000/220,000 BTU capacity, portable on wheels.

- Two black pedestal fans, one floor drum fan, one vintage-style box fan.

- Lot of striking tools including two sledgehammers, one splitting maul, one hatchet, two wood splitting wedges, and one wedge with chain.

- Large plastic storage tote containing miscellaneous 2" ratchet straps, tie down bars, cargo straps, chain binders, and ratchet mechanisms.

- Assortment of 4-inch ratchet straps with various winches and hardware. Diamond plate tool box measuring 32" x 16". Screw-on winches included.

- Pittsburgh 2 ton lift with assorted heavy duty chains and chain binders.

- Assorted lot of 4" chain ratchets, 4" straps/bars, 2" straps, ratchet binders, tie-down straps with hooks, chain with grab hooks, and cargo control hardware.

- Six 3-inch chain ratchet straps with chains and hooks.

- Lot of approximately 15 ratchet straps and tie down straps in various sizes. Includes blue plastic milk crate.

- Lot of pneumatic air impact wrenches and air tools including Porter-Cable, Campbell Hausfeld Professional, Craftsman, and other brands. Approximately 12-14 air tools total in various sizes.

- Retractable air hose reel. Multiple air hoses in various lengths. Orange extension cord. Small plastic crate with pneumatic tools and additional hose.

- Chicago Electric 800 rated watts/900 max watts portable generator with 2HP two stroke engine, recoil start, 120V/60Hz output.

- Briggs & Stratton Elite Series portable generator with Homelite engine, equipped with wheels for portability.

- Homelite LR4300 portable generator, 7.5HP, 4300 watts.

- Red rolling tool cart with drawer, black plastic toolbox on metal rolling stand, assorted tow straps, ratchet straps, cords, and miscellaneous shop supplies.

- Oxy-acetylene welding and cutting torch set including multiple torch handles, cutting attachments, welding tips, twin hose set (red and green), and Olsen replacement torch tips in package. Metal storage box included.

- Oxy-acetylene cutting and welding torch set including multiple cutting torches, oxygen and acetylene regulators with gauges, and twin welding hoses.

- Pneumatic air tool kit in carrying case with impact wrench, air ratchet, and sockets. Air hose reel with red hose. Large pneumatic impact wrench.

- Lot of pneumatic air tools including impact wrenches, air ratchets, and air hammers. Includes green and yellow air hoses. White 5-gallon bucket included.

- Husqvarna 450 chainsaw. Stihl 45AV chainsaw.

- Three Poulan chainsaws.

- ATD 5-gallon bead seater air tank with pressure gauge and discharge hose.

- Two portable air tanks. One Campbell Hausfeld 7 gallon (26.5L) air tank model KT0700. One unmarked portable air tank.

- Portable air tank with pressure gauge and air hose.

- 3 ton hydraulic floor jack with rapid pump feature.

- Hydraulic bottle jack with handle. Pair of jack stands.

- Pair of heavy duty jack stands with adjustable height. 20-ton air/hydraulic bottle jack with hose.

- Two blue hydraulic floor jacks with handles.

- Team Hawg Racing motorcycle lift stand with 300 pound capacity.

- Hydraulic vehicle positioning jack dolly with foot pedal operation and caster wheels.

- Manual tire changing tools including tire iron with bead breaker head and tire spoon lever bar.

- Pair of heavy duty steel jack stands with ratcheting height adjustment.

- Three hydraulic bottle jacks: one Allied 20 ton and two Pittsburgh Heavy Duty 20 ton bottle jacks with handles.

- Heavy duty bench vise with swivel base and handle.

- Four 20-foot Grade 70 transport chains, 3/8 inch, with grab hooks on each end.

- Lot of three sledgehammers with wooden handles and five spare wooden handles.

- Lot of 5 ratchet-style load binders with grab hooks for chain securement.

- Victor oxy-acetylene welding and cutting torch kit including regulators, twin hoses (red and green), and torch assembly in green Victor carrying case. Additional black plastic tool tray included.

- Four 5-gallon buckets filled with rusty chain. Diamond plate aluminum toolbox. Items on wooden pallet.

- Abrasive chop saw with electric motor. Includes assorted abrasive cutting and grinding discs.

- Bainbridge 4 1/2" horizontal metal cutting band saw with stand and vise.

- soldering guns, propane torch, and threaded gauge or puller appears to be incomplete.

- Lot of approximately 17 hammers including claw hammers and ball peen hammers with wood and metal handles.

- Lot of hand tools including large adjustable wrench, pipe wrench, Ridgid pipe wrench, six combination wrenches in various sizes, two adjustable wrenches, slip joint pliers, and needle nose pliers.

- Lot of large combination wrenches in various sizes including 1-5/8, 1-7/8, 2 inch, and 1-3/4 inch. Red bolt cutters. Red handled wire rope cutter/crimper. Adjustable slip joint pliers. Oil filter pliers.

- White cooler. Multiple angle grinders with grinding wheels and wire wheels. Orange electric drill. Assorted grinding and cutting discs. Spool of wire.

- Four red pipe wrenches in assorted sizes. One adjustable pipe wrench. Six combination wrenches in assorted sizes. Two pry bars. One nail puller.

- Large lot of hand tools including assorted screwdrivers in various sizes, wood chisels, cold chisels, metal files, punches, and pry bars.

- Large lot of assorted hand tools including numerous screwdrivers in various sizes, punch and chisel set, pliers, wire cutters, hex keys, and metal toolbox tote.

- Two Irwin bar clamps. Assorted C-clamps in various sizes including 6-inch and 12-inch models. One blue corner clamp.

- Set of 8 large sockets in red metal carrying case, likely 3/4" drive.

- Pittsburgh Pro 10-piece metric impact socket set, 1" drive. Pittsburgh Pro 8-piece SAE socket set, 3/4" drive.

- GearWrench 20 piece SAE/Metric ratcheting combination wrench set, model 35720. Includes SAE sizes 1/4" to 3/4" and metric sizes 6mm to 18mm.

- Snap-On 10 ton frame repair kit in carrying case.

- Craftsman 117-piece mechanics tool set including 1/4-in drive, 3/8-in drive, 1/2-in drive sockets, wrenches, and specialty tools. Includes 3/8-in deep sockets.

- Craftsman 42-piece socket wrench set including 1/4-in and 3/8-in drive tools, ratchet, extension bar, hex bits, Torx bits, Torx sockets, and screwdriver bits.

- Bosch Bulldog Xtreme rotary hammer drill. Skil corded drill. Three titanium drill bit sets. One Pro-Source drill bit set.

- Craftsman plastic toolbox with black handle and latch.

- Two red plastic carrying cases, likely for power tools or socket sets. Marked with 'S.T.A.' and 'MeT' labels.

- Hydraulic porto-power body repair kit with hydraulic ram, pump, hoses, and various attachments in carrying case.

- Pittsburgh 25-piece combination open and box end wrench set in roll pouch. Mechanics tool set in case with combination wrenches, sockets, ratchet, and bits. Assorted adjustable wrenches. Assorted pliers including needle nose, linesman, and slip joint. Ball peen hammer. Ratchet wrench. Coca-Cola plastic crate with plastic containers.

- Michigan Industrial Tools socket set, metric and sae

- Large lot of combination wrenches in various sizes including standard and metric. Mix of brands including some professional grade wrenches. Includes box end, open end, and combination style wrenches.

- Two Central Pneumatic 100ft steel air hose reels in boxes. Assorted pneumatic air tools including air drill, air ratchet, die grinder, air hammer, blow guns, tire inflator with gauge, and various pneumatic attachments and fittings. Merlin brass fittings pack included.

- Assorted socket ratchets in various sizes. Socket extension bars in multiple lengths. Breaker bars. Impact sockets in deep well configuration on socket rails. Pittsburgh socket rail. Flex head ratchets. Universal joint adapters. Socket adapters.

- Pittsburgh 16-piece combination wrench set SAE. Pittsburgh combination wrench set metric. Assorted impact sockets various sizes. 40-piece tap and die set SAE. Stanley socket set with case. Torque wrench. Breaker bar.

- Blacksmith anvil stake or hardy tool with tapered horn.

- Large lot of combination wrenches, adjustable wrenches, ratcheting wrenches, socket sets in cases, wrench roll with combination wrenches, open-end wrenches, box-end wrenches, and specialty wrenches.

- Ryobi 8-inch bench grinder with dual wheels, eye shields, tool rests, and coolant tray.

- GM Goodwrench tool kit in gray plastic carrying case.

- Lot of cordless power tools including multiple DeWalt cordless drills, multiple Ryobi cordless drills, Bostitch cordless drill, DeWalt cordless circular saw, assorted DeWalt and Ryobi batteries, multiple battery chargers, and DeWalt tool box.

- Lot of assorted hand tools including multiple screwdrivers with various handle colors, pliers, adjustable wrench, hose clamps, and miscellaneous hardware in containers.

- Husky 3-drawer portable metal tool box with top lid compartment and carry handle.

- Lot of drill bit sets including multiple Craftsman titanium drill bit sets, Hercules 2-piece cobalt step drill bits, Chicago Electric rotary rasp set, SpeedOut damaged screw extractor set, and assorted drill and driver bit sets in cases.

- 1/2" drive impact socket set in red plastic case with metric and SAE sockets. 1/2" drive breaker bar.

- Red metal tool box top chest with flip-top lid and multiple drawers.

- Durotek 3-drawer metal tool chest with flip-top lid.

- Stanley Mobile Work Center rolling tool box with telescoping handle and storage compartments.

- Honda tool roll kit containing combination wrenches, open-end wrenches, pliers, and screwdriver.

- Lot of assorted hand tools including: Stanley screwdriver set, multiple screwdrivers with various handles, precision screwdriver set, claw hammer, combination wrenches in various sizes, offset box wrenches, dead blow hammers with red handles, needle nose pliers, slip joint pliers, channel lock pliers, linesman pliers, wire cutters, adjustable wrenches, and stud finder.

- Chicago Electric Power Tools air impact wrench. Multiple impact socket sets in various drive sizes including 1/2" drive sets. Ratchets and breaker bars. Assorted screwdrivers. Pliers and wire strippers. Tape measure. Speed wrench. Socket extensions and adapters. Merlin air tool accessory kit.

- Portable plastic toolbox with two lid compartments and metal latches.

- Stanley toolbox with assorted combination wrenches, open-end wrenches, socket set with ratchet, and miscellaneous hand tools.

- Vintage metal toolbox containing assorted sockets, socket extensions, ratchets, and combination wrenches. Red metal tray with additional combination wrenches, open-end wrenches, and ratchet handles. Craftsman combination wrenches in various sizes displayed separately.

- Craftsman plastic toolbox with red lid. 14-piece combination wrench set in roll pouch. Assorted combination wrenches in various sizes. Set of screwdrivers with plastic handles in assorted colors. Metal tool tray.

- Pittsburgh Pro socket set in case. Assorted screwdrivers including nut drivers. Socket set in metal box with ratchet. Additional socket set in plastic case. Assorted pliers including needle nose, slip joint, and linesman. Wire cutters. Adjustable wrench. Long screwdrivers. Breaker bars. Ratchet wrenches. Torque wrench. Ball peen hammer. Rubber mallet. Brass mallet. Red plastic milk crate with blue tape.

- Heavy duty bench vise mounted on workbench.

- Assorted hand tools including multiple paint scrapers, putty knives, masonry trowels, hacksaws, speed squares, pry bars, and utility knives.

- Portable hardware organizer case filled with assorted nuts, bolts, washers, wing nuts, threaded rod, and miscellaneous fasteners.

- STECK torque multiplier lug nut wrench set with multiple sockets in blue carrying case.

- Pittsburgh Automotive Master Fuel Injection Pressure Test Kit, 41 piece, Item 97706. Includes pressure gauge, hoses, and various adapters and fittings in carrying case.

- Assorted eye bolts in various sizes, including galvanized and rusted steel. D-rings and miscellaneous rigging hardware.

- Mac wrenches in red plastic holder, additional loose combination wrenches in various sizes, assorted sockets and extensions, small metal tool box.

- Bosch corded hammer drill in carrying case. Large drill and driver bit set with various drill bits, spade bits, hole saws, and driver bits. Small red drill bit index set. Orange tap and die or extractor set.

- Combination wrench set in roll pouch, multiple socket sets in cases, breaker bars, speed wrenches, chainsaw chain, pry bars, assorted hand tools.

- Rockwell cordless jigsaw with battery, charger, and carrying case.

- Pioneer DEH-S5010BT CD RDS receiver. Pioneer DEH-X26UI CD RDS receiver. JVC KD-R520 CD receiver. Dual XDM290BT AM/FM CD receiver with Bluetooth.

- Pittsburgh Pro 1/2" drive 13-piece impact socket set. Pittsburgh Pro 1/2" drive 13-piece metric impact socket set. Pittsburgh 12-piece punch and chisel set in roll pouch. Red metal toolbox with ratchet handles and extensions.

- Lot of extension cords including orange cord reel with cord, red heavy-duty extension cord, yellow extension cord, gray extension cords, and orange cord wrap holder.

- Black & Decker corded drill with case. Warrior heat gun with case. Makita corded drill. Milwaukee angle grinder.

- Lot of oil filters including multiple NAPA Gold filters (models 1772, 3353, 3354, 1459), STP filter S3786, STP S5 filter, and Luberfiner LFW4071 coolant filters.

- R134A manifold gauge set in red case with hoses. Central Pneumatic air vacuum pump item 96677 with R134A and R12/22 connectors. Additional AC manifold gauge set in plastic packaging. AC adapter fittings and refrigerant tap. Green refrigerant recovery tank in box.

- DeWalt drill bit and driver bit set in ToughCase organizer. Includes titanium drill bits, spade bits, driver bits, nut drivers, and magnetic bit holder.

- Central Forge 14-piece gear puller set with instruction manual in red case. Impact socket set in black case.

- Metal ammo can storage box. Multiple drill bit sets including DeWalt titanium drill bits and multi-material masonry drill bits. Wire terminal assortment kit. Assorted hardware including washers, nuts, and bolts in plastic bags. Measuring tape.

- Socket set with deep well and standard sockets in case. Hole saw kit with multiple sizes. Corded electric drill. Torque wrench in case. Mobil Delvac bucket.

- Large lot of combination wrenches in various sizes. Adjustable wrenches. Pry bars. Pliers. Screwdrivers. Red metal cantilever toolbox.

- Set of T-handle hex keys with orange handles. Assorted screwdrivers. Black plastic toolbox with assorted hardware, fittings, and small parts. Black parts tray with brass fittings and miscellaneous hardware.

- Lot of assorted hand tools including ratcheting box wrenches in various sizes, combination wrenches, C-clamps, locking pliers, bolt cutters, torque wrench, oil filter wrench, and drill bits. Includes black plastic toolbox, green toolbox, and red/black tool bag.

- Assorted combination wrenches. Socket set in black case with screwdriver bits. Socket and bit set in gray case. Red plastic hardware organizer with screws, bolts, and fasteners. Wire crimping tool. Needle nose pliers. Slip joint pliers. Screwdrivers. Loose sockets. Black tool pouch.

- Lot of assorted hitch pins, clevis pins, anchor shackle, lynch pins, large bolts, chain, and miscellaneous heavy hardware.

- Black Jack 6 ton hydraulic bottle jack in carrying case with handle. Two rubber wheel chocks.

- Rolling magnetic floor sweeper with adjustable handle and release lever.

- Portable halogen work lights on yellow tripod stand. Red adjustable work light stand. Assorted work lights including clamp lights and trouble lights. Extension cords and cord reels. Yellow multi-outlet power strip adapter.

- Lot of three mechanics creepers and one roller stool. Includes Pittsburgh Automotive creeper, blue plastic creeper, and red padded folding creeper. Also includes small rolling mechanics seat.

- Miscellaneous SK sockets. Blue Point wrenches. Snap-on drill bit set in red case. Matco gear wrenches. Bauer tool bag.

- Campbell Hausfeld vertical stationary air compressor with two-stage pump head.

- Campbell Hausfeld 1/2" impact wrench, Campbell Hausfeld 3/8" air ratchet, Campbell Hausfeld 3/8" air powered drill, Campbell Hausfeld Jitterbug sander, Campbell Hausfeld 3/8" butterfly impact wrench, Central Pneumatic rubber air hose, Central Pneumatic 3ft x 3/8" air hose lead, laser level, 4-in-1 battery brush, 6V/12V circuit tester, Super Siphon, swivel connector, electrical tape rolls, assorted hardware in bag.

- Large lot of drill bits and driver bit sets including DeWalt, Ryobi, and Cobalt branded sets. Includes screw extractor sets, tap and die bits, spade bits, masonry bits, titanium drill bits, and various driver bit sets in cases. Also includes reciprocating saw blades in packaging.

- Pittsburgh 12 piece punch and chisel set. Pittsburgh 32 piece combination wrench set (SAE and Metric). Pittsburgh Pro 1/2 drive spoke socket set. Portland Saw 15 piece reciprocating saw blades. Duralast magnetic spark plug socket set. DeWalt stud finder. Letter and number stamp set. Assorted deep well sockets. Countersink bit.

- Central Pneumatic Pistol Grip Air Shears. Central Pneumatic 6" dual action air sander. Central Pneumatic Air Hydraulic Riveter item 93458. Hardy 5mil nitrile gloves. Multiple pairs of work gloves including Big Jake brand. Socket set with various sockets and ratchets. C-clamps. Tow straps. Electrical tape rolls. Punch/flange tool.

- Large lot including SDS rotary hammer drill bits, steering wheel puller, 240-piece nut and bolt assortment, mini pick set, screwdriver bit sets, hole saw kit, drill adapter set, adjustable wrench, taps and dies, punches and chisels, DeWalt driver bit set, slide hammer puller, and yellow 5-gallon bucket.

- Red rolling tool chest combination with top chest and bottom cabinet, multiple drawers, on casters.

- US General Pro 72-inch rolling tool cabinet with multiple drawers and drawer lock system.

- Craftsman Ball Bearing top tool chest with 9 drawers. Craftsman Quiet Glide bottom rolling tool cabinet with 5 drawers and lower storage compartment.

- US General Pro rolling tool chest and top chest combination. Three-piece stacking tool storage system with multiple drawers. Contents in top compartment included.

- Craftsman stacking tool chest set consisting of top chest, middle chest, and rolling bottom cabinet with multiple drawers.

- Yukon rolling tool cabinet workbench with wood top, ball bearing drawer slides, single drawer, and two-door lower cabinet on casters.

- Lyon top tool chest with multiple drawers. Craftsman bottom rolling tool cabinet with multiple drawers.

- Craftsman rolling tool cabinet with matching top chest. Bottom cabinet has multiple drawers containing assorted tools and hardware. Top chest features multiple drawers with lock. Wire brush and air hose on work surface.

- Gardall electronic keypad safe. Schumacher fully automatic starter charger. Stanley rolling tool box. Multiple metal tool boxes with assorted hand tools and sockets. Maxwell House containers with hardware.

- Lot of assorted shop tools and supplies including buckets, plastic crates, Ford hubcap, oil cans, warning triangle, tire gauge, drill bits, clamps, hoses, wire brush, and miscellaneous hardware.

- Freestanding propane patio heater with dome top reflector and square base.

- Chicago Electric Welding Systems Dual MIG Welder, 240V 60Hz, with welding gun, ground clamp, and rolling cart stand.

- Lincoln Electric Pro MIG 140 welder on rolling cart with gas cylinder, welding leads, and welding helmet.

- Chicago Electric Welding Systems 40A plasma cutter with digital display, Model 95136. Mounted on metal rolling cart stand.

- DefendAL Universal Coolant/Antifreeze, approximately half barrel remaining in 55-gallon drum.

- Shell Rotella T3 Fleet SAE 15W-40 heavy duty diesel engine oil drum with hand pump.

- US Stove Company Hotblast wood burning stove with front loading door and draft controls. Includes stove pipe sections.

- Roadmaster Inc lighted dealer sign advertising tow bars, tow dollies, braking systems, and towing accessories.

- Metal shelving unit with red and blue plastic storage bins containing assorted hardware including bolts, nuts, washers, screws, and miscellaneous fasteners. Vintage Maxwell House coffee can used for storage.

- Contents of shelf including assorted automotive fluids, motor oils, transmission fluid, brake fluid, tire foam, brake cleaner, lubricants, windshield washer fluid, antifreeze, Marvel Mystery Oil, O'Reilly Premium ATF, various spray cleaners and lubricants, small parts organizer bins with hardware.

- Heavy-duty engine stand with rotating mounting head and adjustable arms on casters.

- Heavy duty steel motorcycle wheel chock with adjustable mounting bar and floor anchors.

- Hydraulic engine hoist cherry picker, foldable design with casters.

- Pittsburgh heavy duty hydraulic floor jack.

- Drywall panel lift cradle attachment with roller. Tractor drawbar hitch with chains.

- Heavy duty trailer dolly with dual pneumatic wheels and T-handle.

- Pittsburgh Motorcycle tire changer attachment. Handles rims from 11" to 25" diameter. Includes mounting hardware.

- Werner 6-foot fiberglass step ladder.

- Two boxes of hay rake tines and tedder teeth. Includes new and used tines in various sizes. Some appear to be John Deere replacement parts. Also includes small hardware and mounting brackets.

- Cosco World's Greatest multi-position aluminum ladder.

- Manual hydraulic pallet jack with steering handle.

- Torin Big Red Jacks 3.5 gallon parts washer, item T10035, bench top unit with pump.

- Campbell Hausfeld 120 lb capacity sandblaster, 125 PSI maximum.

- MVP SuperLine laser level system in hard carrying case.

- Plano GunSlinger hard-sided rifle or shotgun carrying case with handle and strap.

- Parts washer basin mounted on legs with shelf storage below

- Hydraulic log splitter head unit with wedge and control lever.

- Lot of heavy duty transport chains with grab hooks. Multiple lever-type chain binders/load binders included.

- Lot of tractor 3-point hitch lift arms, adjustable lift links, and PTO shafts. Includes multiple sizes and styles.

- Royal Crown Cola wooden crate. Three Kilian Manufacturing Corp ball bearings wooden crates from Syracuse, New York.

- Challenger Lifts two-post automotive lift system.

- Combination wrench sets mounted on wall, screwdriver set, assorted open-end and box-end wrenches, hammer, pipe wrench, miscellaneous hand tools, containers with hardware and fittings, air compressor or pump unit, assorted garage items on shelving.

- Wrench sets, bolt and screw bins, contents of workbench and floor area including floor jacks, hard hat, Maxwell House coffee cans with hardware, tool boxes, assorted hand tools, milk crate, buckets, and miscellaneous shop items.

- Metal shelving unit with contents including pumps, weedeater, automotive parts, alternator, steering components, oil filters, KC Daylighter off-road lighting system, electronic amplifiers, electrical cables, and miscellaneous hardware.

- Metal shelving unit with contents including alternators, bolts, hardware, Maxwell House coffee containers used for storage, various automotive parts, and miscellaneous shop supplies.

- Metal industrial shelving unit with contents including Prestone De-Icer, Marvel Mystery Oil, various automotive fluids, plastic storage containers, toolboxes, grinding wheels, spray lubricants, zip ties, brass fittings, small parts bins, and miscellaneous shop supplies.

- Metal shelving unit with contents including assorted automotive fluids, motor oil, brake fluid, tire foam, transmission fluid, windshield washer fluid, spray lubricants, and automotive starters.

- 1 long shelf lot containing repair manuals, tape, 8 track players, 8 track tapes, speakers, and DVD player.

- Two vintage CRT monitors. Assorted electronics boxes and components.

- Assorted trailer hitch ball mounts, hitch balls in various sizes, weight distribution hitch components, pintle hook, hitch receiver tubes, and towing chain.

- Lot of six plastic portable fuel containers with spouts, various sizes.

- Aluminum frame hand truck with pneumatic wheels and red support bar.

- Heavy-duty appliance hand truck with ratchet straps and stair climber wheels.

- Two hydraulic cylinders with attached hydraulic hoses. One black cylinder and one red cylinder.

- Lot of four commercial drop safes with electronic keypads. Various sizes, some with top compartments. One safe door is open.

- Cabinet with all items on top & pictured

- Duralast Gold distributor. Monroe Gas-Magnum shocks. Wheel center cap. Lawn mower wheels. Assorted automotive parts and accessories.

- Two Maxwell House Original Roast coffee cans being used as storage containers with miscellaneous hardware, tools, and shop items including staples box, plastic bottle, metal tubing, and assorted fittings.

- Hydraulic shop press with pressure gauge and hand pump. Blue steel H-frame with yellow hydraulic components.

- Powerstroke motor from 1999 F450, 7.3 condition unknown

- Automatic transmission from 2007 Ford E-250 van, 6.0L engine, 2WD, 73K miles indicated.

- Lot of assorted V-belts and drive belts from various manufacturers including Dayco, Gates, Jason, and Cub Cadet. Multiple sizes included.

- Stationary air compressor with horizontal tank, electric motor, pressure gauge, and pressure switch.

- Snap-on tire changer machine with mounting hardware and accessories. Hi-Lift jack. Spring compressor tool. Various tire changing attachments and tools.

- Lot includes two metal barrels, assorted steel scrap pieces and angle iron, coiled heavy-duty electrical cable, ratchet straps, and metal storage bins.

- Yellow flammable storage cabinet containing assorted automotive chemicals and lubricants including WD-40, PB Blaster penetrating catalyst, Easy-Off, Loctite products, CRC products, various spray lubricants, filters, and shop supplies.

- Shell Rotella T6 15W-40 oil drum, additional oil drum, red safety gas can with pump attachment, metal funnels, oil drain pan, plastic bucket.

- Large cylindrical fuel storage tank with electric transfer pump and dispensing hose, mounted on metal stand.

- Large rectangular steel fuel tank with dual fill ports and lifting hooks.

- Shop-Vac Quiet Series wet/dry vacuum. Shark handheld vacuum. Additional red shop vacuum. Moving blankets. Boxes with miscellaneous contents.

- Assorted ratchet straps and tie-down straps. Steel cable sling with shackles. Coiled rubber air hose. Yellow hard hat. Miscellaneous hardware and rigging accessories in plastic crates.

- Lot of hydraulic bottle jacks including Wisdom hydraulic bottle jack in box, Big Red 20-ton hydraulic bottle jack, and assorted smaller bottle jacks.

- Two surveying range poles with leather carrying case featuring buckle closures.

- Assorted pliers including needle nose, diagonal cutters, slip joint, and lineman's pliers. Metal shop cart with contents including hoses, belts, straps, and miscellaneous garage items. License plate. Blue bucket.

- Traveller heavy-duty tire tubes (700/750-15), red plastic funnel, WD-40 spray can, Folgers coffee can with contents, assorted hardware and nails in containers, various automotive parts and accessories.

- Lot of 5 heavy duty tow chains with grab hooks on ends, various lengths.

- Mohain 1/2 ton chain hoist lever puller with hooks.

- Ice block tongs with swivel hook and chain link attachment.

- Task Master floor standing drill press with round work table.

- Assorted wood blocks and wheel chocks. Includes rubber wheel chocks and various sizes of wooden blocking.

- Lot of heavy duty tow chains and load binders with hooks. Multiple chain lengths and sizes included.

- Cast iron well pulley wheel with hook, heavy duty chain with grab hook, curved pry bar, and straight pry bar with socket end.

- Three furniture moving dollies with caster wheels. One dolly has orange carpet padding strips.

- Large lot of cut firewood and scrap plywood stored in wooden rack.

- Werner 8-foot fiberglass step ladder with aluminum steps.

- Pair of tire chains for tractor or truck use.

- Coleman camp grill, appears to be a low profile model, in original box.

- plow bottoms

- Detroit Diesel turbocharger assembly with exhaust manifold section.

- Carlisle trailer tire mounted on 5-lug steel spoke wheel.

- Set of four steel wheels with mounted tires. Wheels appear to be vintage style with riveted construction and 5-lug bolt pattern.

- Goodyear Wrangler RT/S LT245/75R16 tire mounted on 5-lug aluminum alloy wheel.

- BFGoodrich Radial Long Trail T/A tire mounted on 6-lug steel wheel.

- Small trailer tire mounted on steel wheel, 4.80-8 size, nylon construction.

- Pair of vehicle bucket seats with headrests.

- Intensa tires, size P205/70R15.

- Chrome semi truck front grille with horizontal slat design and oval emblem mounting area at top.

- Innertubes and baler belts

- Pair of Starcraft branded captain's chairs, likely from conversion van.

- Bronze frog sculpture.

- Chrome automotive bumper. Engine gasket set in box.

- Ford truck front grille. Gray cloth vehicle bucket seat. Sterilite storage tote. Assorted cardboard boxes with contents. Black plastic storage bins.

- water cooler, window air conditioner unit, and Mainstays 1-inch vinyl mini blinds.

- Pioneer car stereo head unit. Four Chevrolet Trucks wheel center caps.

- Pair of gray fabric bucket seats, rolled fabric or carpet material, white vehicle bumper and body trim pieces, miscellaneous auto parts.

- Aluminum diamond plate truck tool box containing hydraulic hoses, cables, and hydraulic control unit.

- Deutz air-cooled diesel engine with alternator, pulleys, belts, and associated components.

- Tectran part #LK135T, 13.5FT APL LLK special custom cable.

- Automotive front fender assembly. Box of coiled air hoses with fittings.

- Uniden Bearcat 880 CB radio in box. RoadKing RKCB Classic CB radio in box. Cobra DC to AC power inverter. Cobra power inverter. Two CB radio antennas.

- Pair of mud flaps with Confederate battle flag design.

- Classic logo mesh banner with grommets.

- Lot of chrome truck emblems including two Freightshaker nameplates and two additional chrome accent pieces, one still in plastic wrap.

- Autotron bug screen for Freightliner trucks, includes original packaging.

- Honda portable inverter generator with electric start, featuring 20A outlet, eco throttle, and circuit protector.

- Lot of 4 motorcycle helmets including 3 open-face helmets with bubble shields and 1 HJC full-face helmet.

- Lot of ratchet straps including gray and yellow tie-down straps. Jumper cables with clamps. Assorted bagged hardware including large bolts and anchors. Reciprocating saw blades in packaging. Miscellaneous cords and supplies.

- Parts washer basin mounted on steel drum stand with flexible spout nozzle.

- Two large agricultural tractor tires mounted on steel rims.

- Lot of 4 trailer tires mounted on steel wheels, various sizes and styles including 5-lug and 6-lug configurations.

- Assorted scrap metal lot including diamond plate sheets, steel panels, metal grating, and miscellaneous metal pieces.

- Pair of tractor 3-point hitch lift arms with tension springs and mounting hardware.

- Pair of Stomil 13.6-28 agricultural tractor tires mounted on steel rims with 8-bolt pattern.

- Pair of Safemark Multi-Angle agricultural tractor tires.

- Lot of tractor tires with agricultural tread pattern and steel wheel rims in various sizes.

- Set of aluminum truck wheels with 8-lug bolt pattern, appears to be 6 wheels total. Heavy duty commercial truck style.

- Hi-Run trailer tire, size 8-14.5.

- Lot of approximately 10-12 used commercial truck tires in various sizes.

- Lot of assorted vehicle tires on metal rack, large tractor tire, black plastic stock tank, assorted long-handled tools, metal pipes and bars, plastic buckets.

- Lot of assorted used tires and wheels in various sizes, including tires mounted on steel rims and unmounted tires.

- Lot of metal livestock gates in various sizes.

- Armstrong tractor tire mounted on steel rim with 6-bolt pattern.

- Two 10-lug semi truck aluminum wheel rims.

- Parmak electric fence charger, electric fence charger unit, multiple coils of galvanized fencing wire, roll of welded wire fencing, spool of wire, battery box.

- Craftsman tow-behind lawn sweeper with collection bag.

- Hydraulic log splitter attachment with cylinder and mounting bracket.

- Lot of yard and garden tools including round point shovel, leaf rake, garden rake, push broom, squeegee floor tool, pitchfork, spade, hoe, post hole digger, loppers, and various long-handled tools.

- Vehicle hood panel, appears to be from a truck or SUV.

- Assortment of metal pipes and electrical conduit in various lengths and diameters.

- Lot of assorted hand tools including multiple pry bars, crowbars, digging bar, and conduit benders.

- Lot of truck trailer light bars and signal light assemblies with various red, amber, and white lights. Includes multiple aluminum-housed light bars and mounting panels.

- Stainless steel broadfork with multiple tines and U-shaped handle.

- Lot of adjustable steel acrow props/shore posts with base plates. Includes one red steel beam.

- Pair of chrome exhaust stack pipes with mounting brackets.

- Pair of trailer mud flaps with metal mounting brackets.

- Pair of galvanized steel loading ramps with slatted tread surface.

- Aluminum diamond plate truck step box with integrated steps, designed for semi truck mounting.

- Lot of four plastic storage barrels/drums in various sizes. One traffic cone included.

- Two large aluminum semi truck fuel tanks with mounting brackets.

- Assorted scrap metal lot including steel plates, flat bars, angle iron, channel iron, galvanized tubing, diamond plate pieces, and miscellaneous metal brackets.

- Metal storage box with lid. Stainless steel container with handles. Wire grid panel. Perforated metal heat plates. Wooden crate.

- Plastic cube-style water storage tank with valve fitting.

- Antique steel hand truck or dolly frame.

- Red metal scaffolding frame section. Three rebar stakes.

- Lot of weathered wood fence posts and metal T-posts.

- Commercial stainless steel fish cleaning station with built-in sink, faucet, and lower storage shelf on casters.

- Stainless steel rolling sink cart with built-in basin, drawer, and lower shelf. Includes muffin pan, wire cooling rack, and assorted kitchen utensils.

- Large lot of assorted garden hoses and tubing in various sizes. Includes rubber hoses, reinforced hoses, and flexible tubing.

- Parts Truck

- Louvered Tailgate

- Amish style enclosed horse-drawn buggy with wooden spoke wheels.

- Two-wheel horse-drawn cart with wooden spoke wheels, padded seat, fenders, and wooden shafts. Includes orange reflectors.

- Antique horse-drawn buggy wagon frame with wooden spoke wheels.

- Metal trailer light bar with three clearance/marker lights and wiring harness.

- Double barrel wood burning stove with stacked 55-gallon drum design and stovepipe outlet.

- Coleman SaluSpa Bahamas inflatable spa with AirJet 120 jets. Blue plastic kiddie pool included.

- Lot of metal fence posts, T-posts, and wire grid panel. Includes chain and metal brackets.

- Stack of plywood sheets and assorted dimensional lumber boards.

- Aluminum diamond plate truck bed tool box.

- Aluminum diamond plate truck bed tool box with hinged lid.

- buggy attachment for leads or other

- buggy attachment for leads or other

- Leather motorcycle saddlebags. Plastic bucket containing assorted spray cans and automotive fluids.

- Lot of horse tack including bridles, halters, and various leather straps.

- Lot of horse tack including multiple leather bridles with bits and one padded cinch strap.

- Lot of horse tack including multiple lead ropes, bridles with bits, and a horse collar.

- Lot of horse tack including multiple bridles, halters, lead ropes, saddle pads, and a horse collar with red liner.

- Wooden barrel with metal bands, leather straps, and rope. Contains wooden implements.

- Lot of assorted rope including coiled natural fiber rope, braided lead ropes with snaps, various lengths of synthetic rope.

- Green Bull 6-foot fiberglass step ladder with aluminum steps.

- Bucket containing horseshoe nails and a farrier rasp.

- Tractor canopy sunshade with metal frame and mounting bracket, designed to attach to tractor ROPS or fender mounts.

- Computer desk with hutch featuring multiple shelves and storage compartments. Black mesh office chair on casters.

- Western-style leather horse saddle with saddle pad, lead ropes, and lariat ropes.

- Western-style leather horse saddle with decorative tooling and silver-tone conchos.

- Western-style leather horse saddle with tooled design, includes saddle blanket and headstall/bridle.

- Vintage western-style leather horse saddle with horn and leather straps.

- Western saddle with decorative saddle pad and lariat rope.

- Lot of horse tack including multiple leather bridles and headstalls, rope halters, lead ropes, and a wool horse blanket.

- Lot of horse tack including multiple halters, lead ropes, bridles, and related equestrian equipment.

- Rolling garden cart scooter with tractor-style swivel seat, four pneumatic wheels, and lower tool tray.

- Ryobi 10-inch table saw mounted on folding metal stand with wheels.

- Lot includes one round point shovel with D-handle, one corn broom, red-handled bolt cutters, multiple push brooms of various sizes.

- Industrial metal rolling step ladder with 3 steps and handrail.

- Diamond plate steel ramp or cover piece.

- Four 5-gallon pails of fluid: one Universal Tractor Trans/Hydraulic Fluid and three CAM2 brand pails.

- Large lot of scrap metal including old radiators, metal pipes, extension cords, window AC unit, rebar, wire fencing, and miscellaneous iron and steel pieces.

- Heavy duty steel fabricated work stand with diamond plate top. Automatic transmission. Manual transmission or transfer case.

- Lot of vintage vehicle HVAC heater boxes and blower assemblies. Cast iron intake manifolds including one painted red. Assorted automotive heater cores and ductwork components.

- Heavy-duty forklift fork attachment frame with mounting brackets.

- Lot of scrap metal including two steel drums/barrels, assorted steel beams, angle iron, flat stock, and miscellaneous metal pieces.

- Lot of large commercial truck tires, appears to be semi-truck or agricultural equipment tires.

- Framed Confederate battle flag display with grommets.

- Forklift mast assembly with lifting carriage and forks. Appears to be a truck-mounted or attachment style forklift unit.

- Firestone tractor tire mounted on steel rim with wheel weights.

- Sickles

- 16.9-28 tractor tires on rim

- truck boxes and assorted

- jumper cables and miscellaneous CDs and other

- Tire racks (TIRES NOT INCLUDED), metal

 

TERMS

-         Bidding closes throughout the day June 17^th

-         A 10% buyer’s premium will be added to the winning bid to determine the final sale price, with a 6% KY Sales tax on applicable items unless a farm exempt or other tax exempt number is provided for our records.

-         Items will be available for preview at 784 Fox Run Road, Caneyville, KY 42721  10am to 4pm CST on June 13^th.

-         Winning bids on items $499 and below will be invoiced to the winning bidder by email through Square and paid in full by credit card.

-         On items $500 and above, a $500 non-refundable deposit will be invoiced by email through Square with the balance due upon item pickup by credit card or cashier’s check.

-         Items must be picked up within 14 days of auction close at 784 Fox Run Road, Caneyville, KY 42721 or any claim to those items is relinquished.

-         No shipping is offered by Hodges Auction Company. For shipping quotes, please contact Nall’s Specialized Hauling at 270-360-0070, 4880 Bardstown Rd, Elizabethtown, KY 42701.