Hotter 'n Hell Antique Tool Auction

ABSENTEE ONLINE BIDS CLOSE BEFORE LIVE AUCTION AND ARE BID AGAINST LIVE AUCTION. We are stil currently adding lots and pictures. We expect to have about 515 lots. Absentee bids accepted online or by contacting us at sara@greatplanestrading.com. Absentee bids must be received by 5:00 AM CST June 15, 2026 in order to ensure they will be executed at the live auction.

CATALOG TEXT BELOW:
1 - Lot: Screwdriver; KRAEUTER plier & rosewood tool h Lot: small flat bladed screwdriver; KRAEUTER needle-nosed plier with 90 degree bend in end of jaws; and a rosewood tool handle with six bits inside, very good.

2 - Three pocket levels that can be attached to a squa Three pocket levels that can be attached to a square; one with brass top; one with STANLEY marked steel top; and one unmarked with steel top, all three have intact vials and mounting screws.

3 - Four chisels & a gouge Four chisels & a gouge: 1 1/2-inch T. TILLOTSON & CO. SHEFFIELD PATENT CRYSTALLIZED CAST STEEL, very good; RIVALRY 1-inch bevel edged socket, very good; D.R. BARTON 7/8-inch socket, rusty on back side; D.R. BARTON 3/4-inch tang, very good; and a D.R. BARTON 1/2-inch tang gouge, very good.

4 - Four sliding bevels Four sliding bevels: Stanley 8-inch with Traut's 1877 patent in one side of rosewood handle, fine; Star Tool Co. 8-inch with Howard's Nov. 5, 1867 Patent date in one side of rosewood handle, fine. HENRY DISSTON & SONS 8-inch with fine rosewood handle, decorative brass screw, fine; and a Stanley 8-inch No. 18 has light rust on both sides of blade, repaired locking screw, good overall.

5 - KEUFFEL & ESSER 24-oz brass surveyor-style plumb b KEUFFEL & ESSER 24-ounce brass surveyor-style plumb bob with removable top and steel tip, fine.

6 - Lot: STARRETT No. 136 level & a Lavietes screwdriv Lot: STARRETT No. 136 cross test level, both vials intact, need cleaning and maybe repainting; & a Lavietes Patent (U.S. No. 2,662,568) multi bladed ratcheting screwdriver, has some corrosion on body where some advertising was stamped, great working order.

7 - Lot: J.R. JERVIS 5/8" sash template & a mahogany s Lot: J.R. JERVIS marked 5/8-inch sash template, fine; and a mahogany saddle square marked W.H. LAMBERT on one end, fine.

8 - Three brass trammel points Three brass trammel points: pair of Stanley points one with pencil holder; and one that was probably made by Disston, fine.

9 - Two spirit levels: 8" rosewood & a 6" with brass t Two spirit levels: 8-inch with rosewood body and brass top and brass feet, marked WARRANTED CORRECT, very good; and a 6-inch with brass top plate and a logo that has a letter Q inside a diamond, needs cleaning, very good.

10 - Lot: three try squares Lot: three try squares: the smallest one has a pitted blade; a try & miter square with rosewood handle, marked with Winterbottom & Traut patent dates, blade pitted on one side; two 6-inch iron handled try squares; and a rosewood handled sliding bevel with 10-inch blade missing the clamping and pivoting screw.

11 - Two wooden handled T-Augers & two wooden handles Two wooden handled T-Augers one with fine bit; and two wooden handles; one looks like it was for an early lawn mower, the other is for an auger.

12 - Unknown make corner brace Unknown make corner brace, has a slit in one of the dust shields that cover the universal joint, will clean to good or better usable condition.

13 - Lot: Stanley HANDYMAN ratchet brace & 4 assorted b Lot: Stanley HANDYMAN H1250 ratchet brace, fine; and four assorted bits incl. an adjustable bit with worm screw, fine; a shorter than average bit; and two wood bits for a power drill.

14 - Unknown make patented T-auger handle Unknown make patented T-auger handle, bit is secured by tightening one side of the handle, fine.

15 - Three Millers Falls 10-inch ratchet braces Three Millers Falls 10-inch ratchet braces: No. 732, fine; Millers Falls No. 1662, very good; and unknown model with faint logo, comes with countersink, good to very good.

16 - Millers Falls No. 2 auger handle Millers Falls No. 2 auger handle, one ferrule cracked at rivet, very good overall.

17 - E.C. SIMMONS KEEN KUTTER embossed camp hatchet E.C. SIMMONS KEEN KUTTER embossed camp hatchet, very good.

18 - KELLY AXE MFG. roofing hatchet with nail claw Nice KELLY AXE MFG. roofing hatchet with nail claw, has nice PLUMB handle with most of original decal or sticker remaining, very good overall.

19 - Two ratchet braces: CRAFTSMAN & VICTOR Two ratchet braces: CRAFTSMAN with heavy duty chuck, very good; and a VICTOR No. 943 10-inch, nickel peeling, will make great user.

20 - Nice PLUMB roofing hatchet with nail notch Nice PLUMB roofing hatchet with nail notch and hammer poll, good original handle, very good overall.

21 - Stanley No. 21 adjustable square, patent 1917 Stanley No. 21 adjustable square with "PAT 1-23-17" & SW logo, very good overall.

22 - Two braces: SEARS & MILLERS FALLS drill brace comb Two braces: SEARS with black painted wooden handles, very good overall; and a MILLERS FALLS drill brace combination that is missing the drill gear and crank handle for the drill portion, there is a spring missing from the direction-selector portion.

23 - WINCHESTER hatchet WINCHESTER hatchet, several scratches near logo, will make good user.

24 - Four bit braces Four bit braces: VICTOR No. 965N 10-inch, missing chuck spring, good or better; MILLERS FALLS No. 322, VG; DUNLAP 10-inch; and a MILLERS FALLS No. 321, good or better.

25 - Two hatchets: TRUE TEMPER & a broad hatchet Two hatchets: TRUE TEMPER No. TFH roofing hatchet with hammer poll, very good; and a broad hatchet marked DROP FORGED with hammer poll, good.

26 - Two small vises Two small vises: on left is a VACU VISE by GENERAL with rubber suction cup on base, very good; and an unknown model that has had the ears on both sides snapped off, the jaws are fine and still move freely, can be put back into service.

27 - Lot: Stanley No. 292 scraper; crowbar & double sid Lot: Stanley No. 292 long handled scraper with good BB-logo blade, very good usable condition; small crowbar, very good; and a double sided rasp marked JAPAN with course on one side and fine on the other side, good wooden handle, very good overall.

28 - Three STANLEY SURFORM planes Three STANLEY SURFORM planes: No. 296 with regular plane handles fore & aft, very good; a similar sized with plastic tote, integral front handle, fine; and a small No. 21-399 fine.

29 - Lot: massive APEX lever-type saw set & pair of nip Lot: massive APEX lever-type saw set, very good; and a rusty and pitted pair of nippers.

30 - PALMGREN No. 20 machine vise with replaceable jaw PALMGREN No. 20 machine vise with replaceable jaw faces, very good.

31 - Two sharpening tools Two sharpening tools: unknown make knife-sharpening steel; plus a NO. 57 CARBORUNDUM BRAND square-tapered sharpening stone with wooden handle, very good.

32 - Lot: DODGE & PLYMOUTH screwdriver; leather knife & Lot: DODGE & PLYMOUTH "Remember THE BENT-SCREWDRIVER" internal sales promo gimmick, fine; leather knife from Towbridge Wells, very good; and a GOODELL-PRATT patented screwdriver JULY 22, 1890 & NOV. 17, 1891, no blades, very good.

33 - Lot: Stanley Two-Tone block plane; sharpening ston Lot: Stanley Two-Tone iron block plane, missing front knob, very good original blade, very good overall; small round sharpening stone for a bench grinder, very good; and an unknown make ratcheting adjustable nut wrench, fine.

34 - Two bit braces: Stanley HANDYMAN & No. 966 Two bit braces: Stanley HANDYMAN No. H1253A with most of original decal on wrist handle, fine; and a Stanley No. 966 non-ratcheting 8-inch brace, fine.

35 - Unusual FORD slip-joint pliers Unusual FORD slip-joint pliers, complete and very good.

36 - Three pocket or bicycle wrenches Three pocket or bicycle wrenches: THE WATERBURY WRENCH CO. quick adjust with nipple or spoke wrench in end of handle, there is no spring behind the toggle that released the worm screw to return it to the rack, so it must be manually pushed back into place; unknown make with light pitting, good working order; and a QUEEN (Mossberg) Patented October 28, 1901 & March 11, 1902, very good.

37 - Lot: TRIMO 10" monkey wrench & 6" V.C. & CO. nippe Lot: TRIMO 10-inch wooden handled monkey wrench, some very light surface rust, will clean to fine overall; and a 6-inch V.C. & CO. end cutter or nipper, very good.

38 - Pair of FORD automotive lug wrenches Pair of FORD automotive lug wrenches, both are fine.

39 - SARGENT plier-like cutter & hole punch for leather SARGENT plier-like cutter and hole punch for round leather belts, very good.

40 - GOODELL PRATT ratcheting wrench GOODELL PRATT ratcheting wrench similar to corner drill, has nice wooden top handle, light rust where the japanning is missing, will clean to very good overall.

41 - Pair of FORD lug wrenches Pair of FORD lug wrenches, both very good.

42 - Stanley No. G12-60 low angle block plane Stanley No. G12-60 low angle block plane with adjustable throat and having screw-adjuster for blade depth and a lateral adjuster, a few tiny spots of light surface rust, very good to fine overall.

43 - Lot: Yankee screwdriver; Boos Tool nut wrench &c. Lot: Yankee screwdriver with flat bit; Boos Tool Co. Kansas City handle adjusted nut wrench; and a hog ringer.

44 - Two pair "GIFFORD-WOOD CO. N.Y." ice tongs Two pair of medium sized "GIFFORD-WOOD CO. HUDSON, N.Y. 542-13 IN." ice tongs, one also marked "PROPERTY OF CITY OF???" both very good.

45 - Brass or brass plated LACLEDE STEEL CO padlock Brass or brass plated LACLEDE STEEL CO padlock with two working keys, fine.

46 - Lot: FORD lug wrench; TUBB'S PAT. end cutters; nip Lot: FORD lug wrench, VG; pair of 10-inch TUBB'S PAT. end cutters with removable/renewable blades, fine; and a 13-inch pair of nippers marked L&B, very good.

47 - Lot: five iron spokeshaves incl. Stanley No. 51; N Lot: five iron spokeshaves incl. Stanley No. 51 with end of handle broken off; Stanley No. 52; unknown with flat and concave blades; another unknown single bladed; plus two bodies for both a single bladed shave and double bladed shave, and a spare blade.

48 - Lot: three Stanley cabinet scrapers Lot: three Stanley cabinet scrapers: No. 81 with rosewood bottom, intact blade, will clean to very good usable condition; and two No. 80 scrapers both with blades, one has SW logo strap holding blade and partial Stanley decal on frame, will clean to fine overall; and an older model with improper screw for bowing the blade, will clean to very good usable condition.

49 - Four like new JAPANESE chisels Four like new JAPANESE chisels: 1 1/2; 1 1/4; 1, 7/8; 3/4; 5/8; 1/2; 3/8; 1/4 & a 1/8 mortising chisel. A fine usable set.

50 - WARDS (Stanley) No. 45 combination plow plane WARDS MASTER QUALITY (Stanley) No. 45 combination plow plane, all three main sections, three depth stops, beading stop, long rods, one short rod, cam is rusty at top including screw, original booklet with bottom outside corner a bit tatty, comes with envelope of spare spurs, and two-row box of blades incl. 10 plow; one fillister; one sash, seven beads, two match, plus slitter and another plow installed in plane for a total of 23, the outer paper is peeling from the cardboard sleeve that covers the cutter box. Plane is really in fine overall condition with just a few spots of surface rust here and there. Rosewood main handle marked WARDS MASTER QUALITY is fine, as is the rosewood knob. This plane will make an fine user. It all comes in an owner made open wooden box.

51 - Large brass plumb bob with removable top Large brass plumb bob with removable top, body made with integral spool to wide string on, steel point, very good overall. Weighs just over 1.5 lbs.

52 - Two brass tools: Square & brass drafting triangle Two brass tools: NICHOLS TOOLS OTTUMWA, IA square with 8-inch and 12-inch legs, fine; and a brass drafting triangle with long side just under 11 inches, has initials FMB stamped into one side, fine.

53 - Small solid brass paperweight anvil, unmarked Small solid brass paperweight anvil, unmarked, fine.

54 - Wheelwrights traveler with brass wheel Wheelwrights traveler with brass when, wooden handle, very good overall.

55 - Bass paperweight anvil with hardy & pritchel holes Another brass paperweight anvil with hardy & pritchel holes, marked WALKNER'S FORGE on side and BOB WALKNER on bottom, fine.

56 - Two Stanley tools: Brass trammel points & a gauge Two Stanley tools: Pair of brass trammel points, one is missing the replaceable point, very good; and a No. 92 butt & rabbet gauge TYPE I "PAT PEN'G" steel plate on end pitted, as is the oft missing steel shoe, brass one is intact and fine.

57 - Larger unmarked brass anvil Larger unmarked brass anvil with machined top plate and horn but the rest is rather crude sand casting. Weighs just under 1.5 lbs.

58 - Two brass caliper rules with metric and English gr Two brass caliper rules with metric and English graduations, the slightly smaller one on the bottom marked GERMANY, both fine.

59 - RIDGELY shears or scissors with brass handles RIDGELY shears or scissors with brass handles, just under 13 inches long overall, very good.

60 - Trench art ashtray made from base of large artille Trench art ashtray made from base of large artillery shell, has anvil in top marked "STUDENT PROJECT, ALLIED TRADES DIV., USAOS", lots of brass in this one. Weighs just over 7.5 lbs.

61 - Horseradish, turnip or sugar beet harvesting knife Small and unusual horseradish, turnip, or sugar beet harvesting knife with wooden handle. Has faint mark, but we can't make it out. Very good.

62 - Small unmarked brass paperweight anvil Small unmarked brass paperweight anvil, very good.

63 - M. CRANNELL ALBANY boxwood screw-arm plow plane M. CRANNELL ALBANY handled boxwood screw-arm plow plane with screw operated depth stop, nice nuts and threaded arms, some pitting on skate and bottom of depth stop, one iron/blade included. The owner's tag on it has a $625 figure on it, we don't know if he paid that for it or if he "saw on like it" priced at $625 in a dealer's catalog or online auction.

64 - Two OAK LEAF iron block planes similar to Stanley Two OAK LEAF iron block planes similar to Stanley No. 120, both have the lever adjuster and both are very good.

65 - Early JOS. MARPLES wedge-locking plow plane Early JOS. MARPLES wedge-locking plow plane with brass tipped arms that have ivory scales in the tops, the screw to adjust the depth stop has a wing nut for locking, riveted skate has a brass stiffener, the arms have been broken from the brackets and reattached, wedges are nice, will display well.

66 - Lot: SIMMONS soldering iron & three awls Lot: SIMMONS soldering iron with wooden handle; and three awls; one has KEEN KUTTER block & wedge logo rolled onto the round shaft, wooden handle, very nice; another has a black hex-shaped handle with the KEEN KUTTER block & wedge logo on two sides, very good; and the last has a wooden handle with big brass ferrule and the KEEN KUTTER block & wedge logo stamped into the wooden handle.

67 - Pair of iron plumb bobs Pair of iron plumb bobs.

68 - Early Type I Poole & Williams Pat. windsor beader Early Type I Poole & Williams Patent windsor beader, hang hole in one end, very good.

69 - Four plumb bobs; one brass with removable top Four plumb bobs; one brass with removable top; three iron including one missing top.

70 - Stanley No. 55 "Universal" plow plane Stanley No. 55 "Universal" plow plane.

71 - Very good STANLEY double bit axe Very good STANLEY double bit axe, has some minor surface rust, will clean to fine overall.

72 - Three iron/steel plumb bobs Three iron/steel plumb bobs: the one on the left is badly pitted; the one on the right is nickel plated and has a removable top, very good; and the one in the center has a removable aluminum tip, what appears to be a removable top but it's stuck, and the body is hollow, it has a lot number and some other markings on it that may indicate it was a dummy round for a gun of some type.

73 - Two Disston hand saws: 26" D-95 & a 26" D-7 Two Disston hand saws: DISSTON D-95 with 26-inch 10ppi plate, fine etch, the etch says DISSTON INC. DANVILLE, VA, fine overall; & a 26-inch D-7 with 8ppi plate, fine etch, fine handle, has a oblong patch of glue from an old sticker on the etch side of the plate, fine overall.

74 - Large brass plumb bob just over 6" tall Large brass plumb bob just over 6-inches tall overall with removable knurled top, steel tip, very good.

75 - Two Disston hand saws with thumb hole handles Two Disston hand saws with thumb hole handles: 28-inch D8, big chip from underside of top handle spur, has a 7ppi plate, very good, very good usable condition; and a 28-inch with 6ppi plate, faint etch, top handle spur has been sheared off and glued back on, will make great user.

76 - Lot: Snap-On BLUE POINT hack saw; STANLEY 12" leve Lot: Snap-On BLUE POINT hack saw, very good; a STANLEY 12-inch plastic combination level with 12-inch scale on top, all three vials intact, fine; and a VAUGHAN SUPERBAR wrecking bar, very good.

77 - Two 26" Disston hand saws Two Disston hand saws: 26-inch with 7 1/2ppi slightly bent plate, very faint etch, thumb hole handle, can be restored to good usable condition; and a fine 26-inch D-23 with 8ppi plate, great etch, fine handle, fine overall.

78 - Lot: Two STANLEY torpedo levels; STANLEY square &c Lot: Two STANLEY plastic torpedo levels, both very good; an unmarked plastic torpedo level, very good; STANLEY 7-inch No.46-502 try & miter square, some light surface rust; STRAIGHT LINE chalk line, fine; and an unknown make adjustable steel square with 12-inch scale or rule, very good.

79 - Disston hand saw: 26" D-23 LIGHTWEIGHT Disston hand saw: 26-inch D-23 LIGHTWEIGHT with 8ppi plate, very good etch, scuffed but intact handle, very good overall.

80 - Fine Stanley No. 3 iron smooth plane with BB-logo Fine Stanley No. 3 iron smooth plane with BB-logo blade, fine tote and tall knob, can go right to work with this one.

81 - Two handsaws: DISSTON & SONS & ATKINS No. 51 Two handsaws: DISSTON & SONS 24-inch with 11ppi plate, bottom handle spur is MIA, will make a good user; and a 24-inch ATKINS No. 51 with 10ppi plate, faint etch, very good overall.

82 - Lot: Four chisels Lot: Four chisels: Three KING CRAFT 1-inch; 3/4-inch and 1/2-inch; all three with original handles, are fine; STANLEY 1/8-inch socket chisel that needs a handle, fine; plus CARBORUNDUM sharpening stone IOB, very good.

83 - Two handsaws: 20" KEYSTONE & ATKINS 26" Two handsaws: 20-inch KEYSTONE with 10ppi plate, WARRANTED SUPERIOR medallion, very faint etch, scuffed but intact handle, will make great user; and an ATKINS 26-inch with 10ppi plate, no etch visible, fine handle, very good overall.

84 - Lot: plastic box full of 20+ 1/4 sockets &c. Lot: plastic box full of 1/4 sockets, CRAFTSMAN 43815 1/4-inch ratchet; CRAFTSMAN 43371 1/4-inch socket driver; a PROTO 1/4-inch to 3/8-inch adapter; CRAFTSMAN 1/4-inch swivel; 3-inch and 6-inch 1/4 extensions; most of the 20+ sockets are marked CRAFTSMAN and are in fine overall condition.

85 - Two Disston D-23 handsaws Two Disston D-23 handsaws: one with 10ppi plate, a few spots of light surface rust, fine etch and fine handle, will clean to fine overall; and an 8ppi model with scuffed but intact handle, etch is good but not as good as the other one, very good overall.

86 - Four 12-inch rules Four 12-inch rules: GENERAL MODEL RAILROAD REFERENCE RULE, fine; unknown make steel rule; Stanley No. 46-222 rule that would be used with a movable steel square head; and a 12-inch plastic rule with 10 cent price embossed into the back side, very good.

87 - Fine 26-inch SANDVIK No. 756 9T/10P hand saw Fine 26-inch SANDVIK No. 756 9T/10P high quality hand saw with original paper sleeve, fine etch, fine handle, has tiny bit of light surface rust near end of plate, will easily clean to fine or better overall condition.

88 - Lot: Keen Kutter tin snip & DIAMOND EDGE drawknife Lot: Keen Kutter 13 1/2-inch tin snips with the KEEN KUTTER arched, VG; and a DIAMOND EDGE 8-inch straight drawknife, VG.

89 - Two ratchet braces: DIAMOND EDGE DE10 & SHAPLEIGH Two ratchet braces: DIAMOND EDGE DE10 with rosewood or cocobolo handles, fine; and a SHAPLEIGH'S S1610, fine overall.

90 - Pair of KEEN KUTTER tinsnips Pair of tinsnips: 16-inch KEEN KUTTER, VG; and 14-inch KEEN KUTTER K8, VG.

91 - Pair ratchet braces: NORLEIGH DIAMOND & SHAPLEIGH Pair of ratchet braces: NORLEIGH DIAMOND NDR8 with cocobolo or rosewood handles, fine; and a very nice SHAPLEIGH'S 10-inch with light colored wood handles.

92 - KEEN KUTTER 555 PROPANE TORCH in original box KEEN KUTTER 555 PROPANE TORCH in original box, very good.

93 - Lot: 2 KEEN KUTTER tin snips & a drawknife turned Lot: KEEN KUTTER K9 tin snips, fine; another KEEN KUTTER tin snips with red handles; and a KEEN KUTTER 8-inch drawknife that has been turned into a scorp.

94 - Four wooden KEEN KUTTER levels Four wooden KEEN KUTTER levels: 14-inch KK104; another 14-inch KK104; & a 14-inch KK13, VG; and an 18-inch KK13, all were made by Disston

95 - Three OAK LEAF tack hammers. Three OAK LEAF tack hammers.

96 - Two wooden levels: BLUE GRASS & a VAN CAMP Two wooden levels: 16-inch BLUE GRASS No. BG-447-16, complete and fine; and a 16-inch VAN CAMP, very good.

97 - Two hardware pliers: OAK LEAF & a VAN CAMP Two hardware pliers: 10-inch OAK LEAF fencing plier, fine; and a VAN CAMP 10-inch Button's? patent, very good.

98 - Lot: Two VAN CAMP 12" plumb & level &c. Lot: Two VAN CAMP 12-inch plumb & level, both vials intact, VG; VAN CAMP torpedo level, fine; and a VAN CAMP'S JENNINGS' PATTERN Auger Bit box with sliding lid.

99 - Small OAK LEAF (GOODELL-PRATT) hand drill Small OAK LEAF (GOODELL-PRATT) hand drill with storage in handle for bits, fine.

100 - 12-inch wooden BLUE GRASS plumb & level Nice 12-inch wooden BLUE GRASS plumb & level with "SAMPLE FINISH OF OUR T-BG 5-7 & 9 LEVELS" in top rail, fine original decal on one face a fine display piece.

101 - Two VAN CAMP tools: hatchet & a 20" level Two VAN CAMP tools: embossed hatchet, very good; and a 20-inch VAN CAMP wooden plumb & level, very good.

102 - Three metal hardware company levels Three metal hardware company levels: 24-inch DIAMOND EDGE DEX1, very good; 22-inch Diamond Edge DEX1, good; and another 24-inch DE-X1

103 - KEEN KUTTER 24" aluminum mason's level KEEN KUTTER 24-inch aluminum mason's level with one dry vial and five intact vials one glass vial cover is cracked, very good overall.

104 - BLUE GRASS lathing hatchet BLUE GRASS lathing hatchet complete and fine.

105 - Three ratchet braces Three ratchet braces: Millers Falls No. 732A 10-inch, very good; Stanley No. 965N, 10-inch, very good; and a 12-inch Stanley? in good usable condition.

106 - Stanley No. 8 iron jointer plane, rosewood tote Stanley No. 8 iron jointer plane with fine rosewood tote and low knob, has 80 percent japanning, early R&L logo blade, some light surface rust, will clean to fine overall.

107 - Stanley No. 113 iron compass plane with SW logo bl Stanley No. 113 iron compass plane with good SW logo blade, intact rear handle, very good overall.

108 - Stanley No. 7 iron jointer plane with good Q-logo Stanley No. 7 iron jointer plane with good Q-logo blade, nice rosewood tote and low knob, fresh from a local cabinet shop, needs cleaning, will clean to fine overall.

109 - Stanley No. 40 iron scrub plane with beech tote Stanley No. 40 iron scrub plane with scuffed but intact beech tote and tall knob, good BB-logo blade, needs light cleaning, fine overall.

110 - Stanley No. 7C iron jointer plane, hardwood tote Stanley No. 7C iron jointer plane with stained hardwood tote & knob, STANLEY lever cap, covered in dust from storage in a cabinet shop, will clean to very good overall.

111 - Stanley No. 13 iron compass plane with brass adjus Stanley No. 13 iron compass plane with solid brass adjuster nut, is missing the screws to lock the adjustable bottom, needs light cleaning, sole is riveted to the brackets and screwed to main body, very good overall.

112 - Stanley No. 6 Type 11 iron fore plane with chip br Stanley No. 6 Type 11 iron fore plane with chip breaker but needing a blade, nice rosewood tote and low knob, very good overall.

113 - Unknown make iron jointer fence Unknown make iron jointer fence that can be screwed to side of wooden or transitional jointer plane, very good overall.

114 - Stanley No. 5 1/2 iron wide body jack plane Type 1 Stanley No. 5 1/2 iron wide body jack plane Type 11 with good rosewood low knob, tote broken in center and missing spur, can be easily restored to usable condition.

115 - ALUMO No. 3B aluminum rabbet plane with fence ALUMO No. 3B aluminum rabbet plane with fence on side, used for screen doors, this one is very good.

116 - Fine MILLERS FALLS No. 5A hand drill with original Fine MILLERS FALLS No. 5A hand drill with original bits inside handle, very good.

117 - Full set 13 IRWIN SOLID CENTER auger bits IOB Full set 13 IRWIN SOLID CENTER auger bits in original oak box with hinged lid, sticker on box top, includes original booklet, a fine usable set.

118 - UNION No. 5A corrugated, iron wide body jack plane UNION No. 5A corrugated, iron wide body jack plane, tote broken and glued, it and knob are likely from a Stanley plane and have been drill out on top to accommodate Stanley fasteners, with light cleaning will make fine user.

119 - Two iron planes: Sargent No. 79 & Stanley No. 190 Two iron planes: Sargent No. 79 duplex or rabbet & fillister plane, missing fence and depth stop; and a Stanley No. 190 rabbet plane that is rusty and may end up with some fine pitting after cleaning, has intact depth stop.

120 - Stanley No. 5C iron jack plane with BB-logo blade Fine Stanley No. 5C iron jack plane with BB-logo blade, fine tote and knob, needs light dusting and maybe a rub down with steel wool and gun oil as it has been in a damp workplace.

121 - Set of 12 Stanley EVERLAST chisels Set of 12 Stanley EVERLAST chisels: 1 1/2; 1 1/4; 1-inch (2); 3/4-inch (2); 5/8; 1/2-inch (2), 3/8; 1/4; 1/8 all need light cleaning but are in very good overall condition. All but three are in WOOD RIVER nylon roll. Included is a custom wooden rack that can be screwed to a wall to hold 9 of the chisels.

122 - Two Stanley smooth planes: No. 4 SW & No. 3 Type 1 Two Stanley iron smooth planes: No. 4 SW with fine rosewood tote and tall knob; good SW blade, & Stanley No. 3 Type 11 smoother with good low knob, tote broken glued,

123 - CRAFTSMAN singe bitted axe with good handle CRAFTSMAN singe bitted axe with good handle, some rust.

124 - Unusual roofing hatchet with original sticker Unusual roofing hatchet with original sticker depicting native chief and marked MATOWOC, very good.

125 - Fine Stanley No. 2 iron smoother fine rosewood tot Fine Stanley No. 2 iron smoother fine rosewood tote and low knob, good T-logo blade, needs light cleaning.

126 - ARTISAN GAMBLES SUPER QUALITY single bit axe ARTISAN GAMBLES SUPER QUALITY single bit axe with good handle, needs light cleaning.

127 - Lot: cooper’s hand adz & an ALBION 2 roofing hatch Lot: cooper’s hand adz; and an ALBION 2 roofing hatchet that has a little surface rust but will clean to good or better usable condition.

128 - Lot: Slitting gage & and a Stanley 2-beam marking Lot: Unknown make slitting gage with two brass wear buttons on head, very good overall; and a Stanley 2-beam marking gage, with 1/2/86 or 1/12/86 patent date in brass mustache, the head of one of the locking screws is 1/2 broken off, a very good user.

129 - RABONE No. 1190 36-inch 4-fold rule with protracto RABONE No. 1190 36-inch 4-fold rule with protractor joint and intact level, very good overall.

130 - Two unmarked sliding inside rules similar to Stanl Two unmarked sliding inside rules: one 4-foot with brass hardware, legs slightly bowed, good to very good; and a 2-foot model with brass hardware, one leg replaced with an owner-made leg of oak, good for parts or restoration.

131 - Pair of Stanley No. 62 4-fold brass-bound rules Pair of Stanley No. 62 4-fold brass-bound rules, one has dark staining, both in at least good usable condition.

132 - Stanley No. 240 4-foot sliding inside rule Stanley No. 240 4-foot sliding inside rule, very good.

133 - Stanley No. 136 1/2 6-inch caliper rule Stanley No. 136 1/2 6-inch caliper rule, very good overall.

134 - Two unmarked sliding inside rules similar to Stanl Two unmarked sliding inside rules similar to Stanley No. 240; one is a 2-foot model and one is 4-foot, the 2-foot had one leg replaced with oak.

135 - Two rules: No. 68 4-fold & Lufkin No. 386 4-fold c Two rules: No. 68 4-fold, very good; and a Lufkin No. 386 4-fold caliper rule, very good.

136 - Stanley No. 110 iron block plane IOB Stanley No. 110 iron block plane IOB, very good.

137 - Two Stanley caliper rules Two Stanley caliper rules: No. 36 2-fold, very good; 32 1/2 4-fold, both very good.

138 - YOUNGSTOWN by MULLINS 188" sliding inside rule YOUNGSTOWN by MULLINS PAT APPLD FOR 188-inch sliding inside rule, complete and fine.

139 - Pair of push drills: Yankee No. 41 & a Millers Fal Pair of push drills: Yankee No. 41 with several bits in handle; a Millers Falls with at least 3 bits inside handle, both very good.

140 - Stanley No. 220 iron block plane IOB Stanley No. 220 iron block plane IOB, box bottom is torn on one side in two places, the plane is fine, comes with a paper string tag.

141 - BUEL BROS rosewood tool handle with four bits Large BUEL BROS rosewood tool handle with four bits inside, incl. gouge, two chisels and a spade bit, very good.

142 - Lot: YANKEE No. 41 & a Yankee HANDYMAN screwdriver Lot: YANKEE No. 41 by North Bros. with one bit in handle, very good; and a Yankee HANDYMAN 133H screwdriver, very good.

143 - Millers Falls rosewood tool handle with 7 original Millers Falls rosewood tool handle with 7 original bits incl. saw blade, very good.

144 - Unknown make tool handle with 8 original bits insi Unknown make tool handle with 8 original bits inside, very good

145 - Nice little OAK LEAF (Goodell-Pratt) hand drill Nice little OAK LEAF (Goodell-Pratt) hand drill with 6 bits inside handle, nice 3-jaw chuck, AUG 13, 1895, fine overall.

146 - Two front knobs for iron bench planes Two front knobs for iron bench planes, one rosewood short knob, and a hardwood tall knob.

147 - Goodell-Pratt handle drill with wooden handle Goodell-Pratt handle drill with wooden handle, marked 0 6 9 very good overall.

148 - PETER WRIGHT 93-pound mousehole, anvil with pritch PETER WRIGHT 93-pound mousehole, anvil with pritchel and hardy holes, comes on a wooden base. Not attached to base so buyer will need to secure it prior to attempting to use. Came out of old FERGUSON HARDWARE STORE in Ferguson, Missouri.

149 - PARKER TOOL CO. GERMANY hand drill PARKER TOOL CO. GERMANY hand drill with intact auxiliary handle, two pinion gears, very good.

150 - Large cabinetmaker’s tool chest Large cabinetmaker’s tool chest. Includes sliding trays, the top two having lids, has a sliding panel to hid bottom of box, intact plane in bottom of box, some minor work will be necessary to get the rear top drawer bottom reattached, has brackets on sides with iron rings, there are two early images of young woman glued into the chest, one on inside of lid, and one on top of top till lid, this box can easily be restored to usable condition.

151 - Pair of medium sized STANLEY? trammel points Pair of medium sized STANLEY? trammel points on a 24-inch beam, very good.

152 - Pair of 12-inch mahogany winding sticks Pair of 12-inch mahogany winding sticks, both have ivory pieces, fine.

153 - Lot: 26" oak sliding bevel & pair of ebony trammel Lot: 26-inch homemade oak sliding bevel; and small pair of ebony trammel points on a 20-inch beam, VG.

154 - Three wooden marking gages Three wooden marking gages: one marked twice on head with J. STARK has a circular brass wear strip.

155 - Two large AUTO wrenches Two large AUTO wrenches: Unknown make 18-inch with a few spots of light surface rust, very good overall; and a Billings & Spencer 15-inch with braized repair at bottom of movable jaw some minor rust, will make good user.

156 - Nice STANLEY NO. 1 ODD-JOBS with original scribe Nice STANLEY NO. 1 ODD-JOBS with original scribe, intact level very good overall.

157 - Two wrenches: 10" Whitman & Barnes and a DANIELSON Two wrenches: 10-inch Whitman & Barnes wood handled monkey wrench, very good; and a J.P. DANIELSON Stillson pipe wrench with wood handle, fine.

158 - Millers Falls No. 227 patented butt gauge IOB Millers Falls No. 227 patented butt gauge, Patented Dec. 18, 1891 in original box, two corners of box need to be re-taped.

159 - Lot: small patternmakers shave; bitstock reamer & Lot: small patternmakers shave; a MILLS & Co. tapered bitstock reamer; small pinback from TINLEY PARK HIGH SCHOOL; a small X-acto tool with collet chuck for drilling pilot holes.

160 - Set of six CRAFTSMAN socket chisels Set of six CRAFTSMAN socket chisels, only two with handles. Sizes are: 1/4; 3/8; 1/2; 3/4; 1; & 1 1/4. All are fine. A good working set that comes in a homemade cloth roll.

161 - Set of 6 MAYHEW All Steel Wood Chisels in original Set of 6 MAYHEW All Steel Wood Chisels Set No. 841 in original pasteboard display box.

162 - Lot: MONARCH TYPE WRITER mirror & 6" level Lot: MONARCH VISIBLE TYPE WRITER Co. advertising mirror; small 6-inch cast iron level, nickel plated, VG.

163 - Lot: Stanley No. 65 marking gage & Stanley pocket Lot: Stanley No. 65 marking gage, fine; and a Stanley pocket level that can be attached to a square, (the screws holding the brass top plate on need to be removed and replaced.

164 - Lot: 2 GRIP-MASTER wrenches & a HOZAN TIRE tool Lot: Two J&R GRIP-MASTER combination wrenches 9/16 & 1/2 extra thin; plus a HOZAN TOOL TIRE LEVER tool.

165 - Two tape measures: K&E 7419 & LUFKIN 50-foot Two tape measures: K&E (Keuffel & Esser) 7419 steel 16-foot tape, fine; and a LUFKIN 50-foot steel tape, very good.

166 - Two pocketknives: J.A. HENCKEL & CARTAILLIR Two pocketknives: J.A. HENCKEL two bladed knife with tortoiseshell slabs, fine; and an all-steel CARTAILLIR (French) pocket knife with two blades and a cork screw, some light rust.

167 - Lot: KRAEUTER inside calipers in original box &c. Lot: Early & fine KRAEUTER & CO. No. 14 inside calipers (1 pair inside) in original pasteboard box with fine label; and an early KRAEUTER & CO. No. 13 outside caliper box containing one original caliper, the box has a separated end on the bottom.

168 - YANKEE No. 251A ratcheting tap handle, fine. YANKEE No. 251A ratcheting tap handle, fine.

169 - Pair of Starrett 50-foot tape measures Pair of Starrett 50-foot tape measures: No. 510 in leather case "Without Hook" fine; and No. 530 “Without Hook” in steel case, both fine.

170 - Wooden box of canvas or sail needles Wooden box of canvas or sail needles, very good.

171 - GREEN T-Handle Repairman's Taper Reamer & LUFKIN GREEN T-Handle Repairman's Taper Reamer in original box, fine; & LUFKIN NI-CLAD 50-fool steel tape, in a tatty box.

172 - Lot of four tape measures Lot of four tape measures: German tape in original box with great graphics; Lufkin Wizard No. 686, box only, Stanley Redi-Level plastic tape measure with advertising on one side in original box, fine; and a LUFKIN 146PD 72-inch steel tape in original box.

173 - Two test indicators IOB; IDEAL & SUPERIOR No. 75X Two test indicators IOB; IDEAL & SUPERIOR No. 75X.

174 - Two Lufkin Tape Measures IOB Two Lufkin Tape Measures IOB: No. C1213 50-foot, "Chrome Clad" steel tape, fine; and a 0503D METALLIC REFILL IOB.

175 - Scarce Stanley No. 11 Lignum jointers mallet Scarce Stanley No. 11 Lignum jointers mallet, fine.

176 - Catalogs: 1904 Cheney Hammer reprint & METAL CRAFT Two catalogs: 1904 Henry Cheney Hammer Co. MWTCA reprint, fine; and a DIXON TOOLS ART METAL CRAFTS.

177 - Lot: CLARK expansive bit cutters &c. Lot: CLARK No. 2 expansive bit cutters (3) IOB; Starrett 530-M Metric Steel tape measure IOB; and a Starrett SPECIAL 10M 33FT catalog No.LHC530ME Satin Chrome Tape Line Only with hook IOB.

178 - Lie-Nielsen Tool Works tool pamphlets and catalogs Lie-Nielsen Tool Works tool pamphlets and catalogs (30) from 1996 to 2013 plus one Starrett catalog.

179 - Hand saw shaped beard comb Hand saw shaped beard comb marked "I CAME FROM HANEY, THE BARBER" in original sleeve.

180 - Lot: Lufkin hole gage; GOODELL PRATT glass cutter Lot: Lufkin No. 78C small hole gage IOB; GOODELL PRATT No. 444 glass cutter IOB; MASTER RULE "BROWNIE No. 116 steel tape measure IOB; WALSCO 25-foot tape IOB; and 75 corrugated fasteners 5/8 x 6.

181 - Nice July 10, 1900 can opener with rosewood handle Nice July 10, 1900 can opener with rosewood handle.

182 - Three tape measures Three tape measures: WIZARD 6-foot: nice STARRETT 144-inch C504 lineman's tape measure in stainless steel, fine; DEFIANCE by STANLEY 6-foot tape, VG.

183 - Lot: mini iron anvil; internals for a Swedish barr Lot: mini iron anvil paperweight; internals for a Swedish barrel knife; milage counter for bicycle; fence for iron duplex plane; and a INDIA synthetic sharpening stone; and a Stanley No. 25 sliding bevel with rosewood handle, BB logo blade VG.

184 - Lot: Keen Kutter box of number stamps; wood fasten Lot: Keen Kutter nail set box full of number stamps; Richardson's After Dinner Mint box full of serrated wood fasteners SHARP; SUR-KUT razor hone IOB; and a pair of small lathe centers in a fitted wooden box, very nice.

185 - Box lot: knife sharpener; advertising rules &c. Box lot: knife sharpener; several 6-inch advertising rules; MWTCA CAMP HILL keychain level; small box push drill bits, etc.

186 - Lot: two float-type tools; three mortise chisels & Lot: two float-type tools; three mortise chisels; and a bit with a sharp point.

187 - Large PLANO bag with side pockets, face pocket &c. Large PLANO bag with side pockets, face pocket, mesh in back for carrying shirts or jackets, has shoulder strap, and two handles, fine overall; and comes filled with clear plastic lidded containers that we full of carving and other tools when it came to us. Would be perfect for a tackle bag, a organizer for a fly tyer/tier.

188 - Lot of 12 assorted carving tools Lot of 12 assorted carving tools: Addis 21; BUTCHER gouge; unmarked parting tool; BUCK BROTHERS 3; gouge made from an old file; BARTON V-gouge; 37103-040; modified V-gouge marked O.H. PELKE; swept gouge with rosewood handle; another gouge; 4MM gouge; and a narrow WARD mortise chisel.

189 - Lot: three Lutz-type file handles all KEEN KUTTER Lot: three Lutz-type file handles all with the E.C. SIMMONS KEEN KUTTER logo; one is holding a Phillips head screwdriver bit.

190 - Two rosewood handled sliding bevels Two rosewood handled sliding bevels: 6-inch OAK LEAF (Stanley), complete and fine; and a 5 3/4-inch KEEN KUTTER (Disston) fine.

191 - Four KEEN KUTTER screwdrivers with round handles Four KEEN KUTTER screwdrivers with round wooden handles; the two longest ones are marked BLUE BRAND along with the Block & Wedge logo.

192 - E.C. SIMMONS Keen Kutter razor strop buckle E.C. SIMMONS Keen Kutter razor strop buckle, very good.

193 - Five different sized KEEN KUTTER screwdrivers Five different sized KEEN KUTTER screwdrivers with the 2-piece brass & steel ferrule, they range from good to very good overall.

194 - Five KEEN KUTTER tools: K109 putty knife &c. Five KEEN KUTTER tools: K109 putty knife, fine; K54-2 1/2 linoleum knife, fine; K79 with black plastic handle, fine; K95, complete and fine; and a KEEN KUTTER 1 1/4E putty knife, fine.

195 - Three stout KEEN KUTTER flat bladed screwdrivers Three stout KEEN KUTTER flat bladed screwdrivers: heavy hex collar and a shaft that goes all the way thru the handle to the end where it is capped with a big plug, PAT 3-24-03 with light wood handle, has E.C. SIMMONS with block & wedge logo, fine; a "stubby" Keen Kutter with red handle, fine; and the largest is similar in construction to the first one, the wooden handle is chapped and cracked, but is in very good usable condition.

196 - Unusual JEMCO weeding tool Unusual JEMCO weeding tool, very good to fine.

197 - 26" GOODELL-PRATT brass-bound mahogany level Nice 26-inch GOODELL-PRATT brass-bound mahogany double plumb & level, very good overall.

198 - IRWIN STRAIGHT-LINE 24" double plumb & level IRWIN STRAIGHT-LINE 24-inch double plumb & level with plastic stock, steel straight edges glued to top and bottom rail very good; fresh from a working local cabinet shop.

199 - 20" Harvey Peace 12ppi panel saw Good 20-inch Harvey Peace 12ppi panel saw with brass Hankin & Tenney Patent (U.S. No. 280,612) saw stiffening plate between bottom of handle and plate, just came out of a working cabinet shop and previous owner says it’s a wonderful user.

200 - Lie-Nielsen TOOL WORKS scratch stock & two blanks Lie-Nielsen TOOL WORKS scratch stock or beader similar to a Stanley No. 66, this one tool just came out of a working local cabinet shop and comes with 8 double ended blades, and two blanks for making custom profiles, flat & curved fences, in great working shape, comes with original Lie-Nielsen box.

201 - GREENSLADE BRISTOL 16 3/4" wooden jack plane Fine GREENSLADE BRISTOL 16 3/4-inch wooden jack plane with very good HEARNSHAW BROS “JOHN BULL” iron, will make a fine user.

202 - Digital moisture meter in original box Fine digital moisture meter in original box, original price $119.99. Has HANDYMAN MEMBER TESTED AND RECOMMENDED, lightly used.

203 - SARGENT No. 409-32 smooth plane Fine SARGENT No. 409-32 smooth plane with the big letter S embossed into the lever cap 2-line SARGENT & CO., MADE IN USA blade, fine composite or plastic tote and knob, fine overall.

204 - Five assorted bench hold downs Five assorted bench hold downs: 12130; 225D; ARMOR CLAMPING FORCE; and two GH-201-B, all are very good.

205 - TECO WOOD STUDY KIT of wood samples TECO WOOD STUDY KIT of wood samples of 48 U.S. species; 3 foreign species; and four Special Products (laminate wood, plywood, hardboard, & cigarette proof panel), all in a nice wooden box with a list of the contents taped to the lid of the box; and a "SCIENCE TEACHERS GUIDE Woode Experients for High School Students For Use With The TECO WOOD STUDY KIT Prepared by RESEARCH LABORATORY Timber Engineering Company Washington 6, D.C."

206 - Stanley No. 3 iron smooth plane Stanley No. 3 iron smooth plane made for a hardware store as it has a twisted lateral lever; good BB-logo blade, nice low knob and very good but improper tote, will make a fine user.

207 - Lot: STANLEY Set No. 1525A set; hammer head &c. Lot: STANLEY Set No. 1525A set of combination wood drill and countersinks; a rusty hammer head with nail-holding feature on top; and a JASON YUEN "Multifunctional tool ballpoint pen" in original box, very good.

208 - Lot: VOYAGER tool bag full of NOS tools Lot: VOYAGER tool bag full of NOS tools incl. PITTSBURGH 8PC TECHNICAL MEASURING SET with inside and outside spring calipers; spring dividers; depth gage; 6-inch stainless pocket rule, analog caliper; PITTSBURGH 4-IN-1 quick change multi head hammer; 3-foot retractable keychain tape measure; WARRIOR cordless (battery powered) micro engraver; brass brush; 16Pc. Ceramic Magnets; and a PITTSBURGH 64656 Telescoping Magnetic Pickup Tool.

209 - BR TOOLS 500 PIECE Power Riveter & Hole Punch BR TOOLS 500 PIECE Power Riveter & Hole Punch in original box, fine.

210 - Veritas Small Plow Plane right handed model Veritas Small Plow Plane right handed model with three blades, owner has installed a wooden wear strip to fence, fresh from a working cabinet shop with original invoice ($) and owners manual, fine.

211 - MILWAUKEE 6246 HEAVY-DUTY jig saw MILWAUKEE 6246 HEAVY-DUTY jig saw in fine working condition, comes in fine owner-made wooden box with handle and piano hinge, fresh from a local shop.

212 - JOSEPH BUSH 1/8" boxed side bead molding plane JOSEPH BUSH 1/8-inch fully boxed side bead molding plane, complete and fine, and fresh from a working cabinet shop.

213 - Pair of splitting wedges Pair of splitting wedges used by the previous owner when riving logs. One is maked SFC INC JAPAN 5 DROP FORGED; the other has a WEAR SAFETY GLASS warning, both are fine.

214 - Three wooden molding planes Three wooden molding planes: J. DENISON No. 11 hollow, very good; H.L. JAMES 1/2-inch single boxed side bead, very good; & a T. TURNER SHEFFIELD fully boxed 3/16-inch fully boxed side bead, very good.

215 - Lot of three try squares: includes two Stanley Lot of three try squares: Stanley No. 20TS 8-inch, VG; Stanley 6-inch with rosewood handle, hang hole; and an unknown make 4 1/2-inch, good usable condition.

216 - Three fine KEEN KUTTER putty knives Three fine KEEN KUTTER putty knives: K49 with fine black plastic handle; K49 with wooden handle; and a K75 with wooden handle.

217 - Two fine KEEN KUTTER gauges Two fine KEEN KUTTER gauges: K85 butt gauge; and K44 single stem marking gauge with round wheel.

218 - Six different KEEN KUTTER flat bladed screwdrivers Six different KEEN KUTTER flat bladed screwdrivers with red plastic handles, all are very good to fine.

219 - Two rosewood handled KEEN KUTTER tools Two rosewood handled KEEN KUTTER tools: S1574AK; and a K101 putty knife, both are fine.

220 - Lot of KEEN KUTTER & Simmons tools Lot of KEEN KUTTER & Simmons tools: KEEN KUTTER tack lifter with wooden handle, very good; SIMMONS linoleum knife, fine; KEEN KUTTER offset screwdriver; and a hoof trimming knife with block & wedge logo and marked MADE IN ENGLAND, some light pitting on blade.

221 - Lot: brick hod carrier & pair "DRUMMER BOY" shears Lot: brick hod carrier, some light rust very good overall; and a pair of Burgon & Ball No. 10 "DRUMMER BOY" shears from SHEFFIELD Eng., very good.

222 - Lot: RED DEVIL nail puller & DREIER hack saw Lot: RED DEVIL No. 101 nail puller, fine; and a DREIER CHALLENGER No. 350 hack saw that is somewhat similar to a Millers Falls Buck Rogers hack saw, this one has the red plastic handle and a tubular frame that will store extra blades, the handle has a piece broken out from bottom corner on one side, and there is a nail securing the blade at one end, very good overall.

223 - GROSCO QUIK-GRIPE WIRE STRETCHER Unusual GROSCO INC. DES MOINES IOWA QUIK-GRIPE WIRE STRETCHER 100 PAT. PENDING, fine.

224 - Two medium sized ice tongs Two medium sized ice tongs.

225 - U.S. NAVY MARK VII hand-cranked 1/2-Ton bomb hoist Unusual U.S. NAVY MARK VII hand-cranked 1/2-Ton bomb hoist

226 - Lot: 1/2-inch brass universal; 10 1/2-inch brass t Lot: 1/2-inch brass universal; 10 1/2-inch brass tube with tapered polished pin inside; a stack of 10 or so NOS ID tags "NATIONAL REFRIGERATORS CO. ST. LOUS, MO. all separated by paper; a small J.A. PETERSON CO. St. Louis Mo. 63144 ice pick, and a 1947 owners manual for a CENTURY Cub Electrick Drlll Kit.

227 - Two wooden bench planes Two wooden bench planes: 22-inch Jointer stamped J.W. ROBERTS twice on toe; and a 26-inch jointer that needs a blade and chipbreaker.

228 - G.W. DENNISON rosewood screw-arm plow plane Nice G.W. DENNISON rosewood screw-arm plow plane with boxwood arms and nuts, has a few thread chips, fine overall. Comes with a light colored display stand

229 - Two M-WTCA giveaways Two M-WTCA giveaways: a square nail marked MWTCA CR 1991 which was likely the Cedar Rapids meeting; and a small STANLEY keychain tape measure marked MEMPHIS 1980, fine.

230 - Eight Mathiesen center bits Eight Mathiesen center bits: 1/2, 9/16, 9/16, 5/8, 3/4, 1 1/8, 1 1/8, 1 1/8.

231 - Lot of 4 small wooden clamps Lot of 4 small wooden clamps: Jorgensen, 5" long jaw; unmarked, 4" jaw; and a pair with 4" jaw, 5" reach. All are very good.

232 - Lot 12 various bits, measuring 3" to 6 1/4" long Lot of 12 various bits, measuring 3" to 6 1/4" long. All very good.

233 - Lot of 4 medium-sized unmarked wooden clamps Lot of 4 medium-sized unmarked wooden clamps: Length of jaws range 8 3/4" to 10", clamping capacity around 6" for each, with depth of 4" to 5", all very good.

234 - Five manufactured rafter or framing squares Five manufactured rafter or framing squares.

235 - Lot of 6 wooden clamps Lot of 6 wooden clamps, each measuring about 12" by 6" overall. Strong MCM look, all very good.

236 - 4 early steel framing squares with hand stamped nu Four early steel framing squares with hand stamped numbers.

237 - Lot of 4 smaller unmarked wooden clamps Lot of 4 smaller unmarked wooden clamps: a curved measuring 7 1/2" by 4 1/2" overall; a long-jawed pair measuring 9 1/2" by 6 1/2" overall; and a matched pair, 7 1/4" by 13" overall. All very good.

238 - Lot: KNAPP HUNTING KIT bone saw; socket chisel &c. Lot: KNAPP HUNTING KIT bone saw in leather case that be worn on belt; socket chisel; saw set; CRAFTSMAN push drill & an unusual screwdriver that has a 2-piece body that pull apart and bits can be stored inside handle, first of this model we can recall seeing.

239 - Lot of 16 marked center bits Lot of 16 marked center bits: James Bee 9/16; Brown & Wells A1 (1-in.); Buck & Hickman 11/16; Carrick & Craig, Argyle St. Glasgow, 1 1/8; J. M. Fisher, 3/8; Fenton & Marsden, 9/16; Footprint, Made in England, 1 1/4; Isaac Greaves, 3/4; Mackey, Burley & Hey??? 11/16; Murray Liverpool, 1 1/4; Henry Pasley 7/8; Spear & Jackson, Sheffield, 3/4; T. Turner Warranted, 2"; T L Wells & Co., 3/4; John Wilson, Sheffield, 3/4; TOGA 7/16.

240 - Lot of 19 Mathiesen center bits Lot of 19 Mathiesen center bits: 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1 1/8, 1 1/4, 1 3/8, 1 5/8, 1 3/4.

241 - Wheelwright's traveler with brass wheel marked PAT Wheelwright's traveler with brass wheel marked PATENT, wooden handle, very good.

242 - Marples ULTIMATUM plated bit brace Marples ULTIMATUM plated bit brace, chuck needs work, the plug in the top handle has been replaced with cameo-type image of a woman in profile, unusual.

243 - RUSE brass printers pica rule RUSE brass printers pica rule, very good.

244 - Unmarked 9 1/2-inch brass spirit level Unmarked 9 1/2-inch brass spirit level, fine.

245 - H. CHAPIN boxwood screw-arm plow plane Nice unhandled H. CHAPIN boxwood screw-arm plow plane.

246 - Small unmarked 8" brass backed saw Small unmarked 8-inch brass backed saw, wooden handle is cracked around front fastener, good or better overall.

247 - Screw-arm boxwood plow plane, ivory tips CHICAGO Handled screw-arm boxwood plow plane with ivory tips and very faint ???NS-RUNYON-PARKER CHICAGO is our best guess on the mark on toe, numerous thread chips, very good overall.

248 - Unusual & early 5 9/16-inch gunmetal boxed plane Unusual & early 5 9/16-inch gunmetal boxed plane with applied steel sole, has round steel bridge, rosewood? wedge, has a fine 1 1/2-inch cutter marked "EXCELSIOR CUTTER METALLIC PLANE CO. AUBURN N.Y." very good overall.

249 - ?ROWN & WELLS Sheffield-style bit brace Unusual ?ROWN & WELLS brass-plated beech Sheffield-style bit brace, intact spring chuck, the plug is missing from the top of the top handle, very good overall.

250 - Four wooden levels from hardware stores Four wooden levels from hardware stores: 16-inch Keen Kutter KK13, intact vial, good or better; 16-inch OAK LEAF, both vials intact, very good; 16-inch VAN CAM in red paint, fine; and an 18-inch KEEN KUTTER (Disston) No. 104 both vials intact, good or better.

251 - Three hardware brand hatchets Three hardware hatchets: VAN CAMP embossed with hammer poll, very good; VAN CAMP with acid etched logo, fine original handle; head marked on back "W.C. KELLY PERFECT CHARLESTON W VA USA, REG. U.S. PAT. OFF. No. 210847, fine; and a BELKNAP BLUE GRASS with hammer poll.

252 - BROWN CAMP HDW IOA broad hatchet &c. BROWN CAMP HDW IOA broad hatchet from DES MONINES & a leather sheath for a BOY SCOUT hatchet.

253 - Three assorted hammers: VAN CAMP & OAK LEAF Three assorted hammers: fine little VAN CAMP ball peen with hang hole; OAK LEAF tack hammer with little claw; and an OAK LEAF machinist or riveting hammer, VG.

254 - Four pair of OAK LEAF dividers: Four pair of dividers: OAK LEAF 10-inch divider, fine; OAK LEAF 7-inch dividers, fine; OAK LEAF 6-inch dividers; and an OAK LEAF 8-inch dividers,

255 - Three OAK LEAF slip-joint pliers; one with curved Three OAK LEAF slip-joint pliers; one with curved jaws; one with thin jaws, all are very good.

256 - VERITAS VARIABLE BURNISHER VERITAS VARIABLE BURNISHER, very good.

257 - PEXTO 26" 8ppi hand saw with wheat carving PEXTO 26-inch 8ppi hand saw with small bit of wheat carving on handle, fine etch, fine overall.

258 - Pair of adjustable jeweler saws Pair of adjustable jeweler saws; the smaller one marked MADE IN GERMANY, the other marked HRP is likely German too, both are fine.

259 - J. JACOB SHANNON & CO. PHILA hand saw 26" NICE J. JACOB SHANNON & CO. 1744 MARKET STREET PHILADELPHIA 26-inch 8ppi hand saw with fine etch that includes "Mill, Mine, Railroad, Builders and Contractors, SUPPLIES HARDWARE and EQUIPMENT" in very good to fne overall condition.

260 - Four near new JAPANESE mortising chisels Four near new JAPANESE mortising chisels; 1/4; 5/16; 1/2; & 5/8, all come with plastic caps.

261 - Nice Disston & Sons 26-inch No. 120 rip saw Nice Disston & Sons 26-inch No. 120 rip saw with 5 1/2ppi plate, good etch, fine handle, very good overall.

262 - 9 1/2-inch flush cutting saw with offset handle Unusual 9 1/2-inch flush cutting saw with offset rosewood handle, blade riveted to steel frame, no visible markings, very good.

263 - Pair of 26-in. handsaws: OHLIN BISHOP & WARRANTED Pair of 26-in. handsaws: nice OHLIN BISHOP S50 hand saw with 26-inch 8ppi plate, very good etch, inside edge of handle near the medallion down to the bottom screw is chipped and scuffed but otherwise intact, very good to fne overall; and an unknown make with plastic handle & WARRENTED SUPERIOR medallion, plate needs cleaning.

264 - Two steel back saws: ATKINS 14" & DISSTON 12" Two steel back saws: ATKINS 14-inch No. 3? that is complete and very good; and a DISSTON 12-inch with some etch visible under dirt and light rust, will clean to very good overall.

265 - Early Type I Poole & Williams Pat. windsor beader Early Type I Poole & Williams Patent (U.S. No. 313,617) windsor beader, hang hole in one end, very good.

266 - JACKSON 14" steel back saw, WARRANTED SUPERIOR JACKSON 14-inch steel back saw, WARRANTED SUPERIOR medallion, splinter from side of top handle spur, very good overall.

267 - SHAPLEIGH HARDWARE 25 1/2" No. 54KL KlicKer saw SHAPLEIGH HARDWARE COMPANY 25 1/2-inch No. 54KL KlicKer hand saw with 8ppi plate, good etch, fine laminated handle, with very light cleaning it will be in fine overall condition.

268 - Small 7" PORTER DISSTON advertising hand saw Small 7-inch PORTER DISSTON advertising hand saw, very good.

269 - 12" brass back saw with S&J medallion Good 12-inch brass back saw with clunky looking handle with S&J (Spear & Jackson) medallion, good overall.

270 - Pair of keyhole saws: small 9" model & DISSTON 12" Pair of keyhole saws: small 9-inch model, handle held by two brass screws that do not go all the way through, dainty little fishtail handle, some light pitting on blade; and a DISSTON 12-inch model with scuffed but intact handle, very good overall.

271 - Unknown make 12-inch steel back saw Unknown make 12-inch steel back saw, faint etch on very good plate, very good handle, WARRANTED SUPERIOR medallion, very good overall.

272 - Unusual 18" E.C. ATKINS SILVER STEEL NAIL SAW Unusual 18-inch E.C. ATKINS SILVER STEEL NAIL SAW with DISSTON handle and medallion, very good.

273 - "DUNN & CO. 5 CAST STEEL" 12" steel back saw "DUNN & CO. 5 CAST STEEL" 12-inch steel back saw with open handle held by two split nuts, very good overall.

274 - Two saws: Cunneen Patent hack & 9" DEER BRAND Two saws: Cunneen Patent (U.S. No. 1,497,135) hack saw with unusual frame, very good; and a 9-inch DEER BRAND WEST GERMANY Professional Quality reversible flush cutting saw, fine.

275 - CRAFTSMAN brass blow torch CRAFTSMAN brass blow torch, complete and fine.

276 - Nice DISSTON 26" No. 7 handsaw with paper label Nice DISSTON 26-inch No. 7 handsaw with remains of paper label around the medallion, faint etch, the top spur has been removed and a new one grafted on, a fairly nice job, the 8?ppi plate is full sized and has intact nib, this saw will make a fine user with light cleaning.

277 - Patternmaker's lot: three gouges, handles, & shave Patternmaker's lot: three gouges (3/8; 1/2 & 5/8) that can be used with any of the four included handles; and a small wooden shave, all are fine.

278 - Three rosewood handled putty knives Three rosewood handled putty knives: one marked UNIVERSAL; one GOODELL ANTRIM N.H. 66-1 1/4E; and one highly polished GOODELL COMPAY ANTRIM N.H. U.S..A. all are fine.

279 - Seven 9-inch all-steel gouges Seven 9-inch all-steel gouges from 3/8 down to 1/8 all have knurled ends, found with a lot of pattermaker's tools, all are fine.

280 - Three rosewood handled spatulas Three rosewood handled spatulas: the longer one marked UNIVERSAL LF&C; the center on marked RUSSELL GREEN RIVER WORKS; and the other is marked UNIVERSAL All are very good to fine.

281 - Four carving tools: D.R. BARTON No. 28 gouge &c. Four carving tools: D.R. BARTON No. 28 gouge, fine; unknown make No. 29 gouge, very good; unknown make 7/16 gouge; and unknown make V-gouge, very good to fine.

282 - Lot: box of 12 assorted NICHOLSON files &c. Lot: box of 12 assorted NICHOLSON files; small brush with wooden handle 460 VULLCAN RUBBER; and a large 6-inch sail needle, curved at the end.

283 - Eight assorted chisels & gouges from patternmaker Eight assorted chisels & gouges from a patternmaker's box: CHARLES BUCK 3/16-inch mortising chisel, fine; G.I. MIX 11/16 tapered socket chisel, VG; two WITHERBY 1/8-inch mortising chisels, both fine; 1/4-inch tang carving chisel, fine; D.R. BARTON 1/4-inch tang chisel fine; BUTCHER 3/8-inch skewed tang chisel that needs handle; and a BUTCHER 11/16-inch gouge that needs a handle, fine.

284 - Lot: 6" sail sewing needle; original box files &c. Lot: 6-inch sail sewing needle; original box with 12 Assorted Nicholson files; and a small No. 460 brush with VULCANIZED RUBBER, fine.

285 - Four wooden handled T-augers with bits Four wooden handled T-augers with bits: two are the patented handles like those by PS&W. Some cleaning required.

286 - Two 18" wooden handscrew or clamps with wooden scr Two 18-inch wooden handscrew or clamps with wooden screws; one marked.

287 - Three furniture clamps Three furniture clamps: two wooden and one pipe all are about 66-inches long overall. We have added a 4th wooden clamp that looks owner made and needs work.

288 - Four flat bladed screwdrivers Four flat bladed screwdrivers: one is marked with 1883 on one side and 1884 on other side; another was made from a file; one has a circular logo.

289 - Three papering tools: RIDGELY TRIMMER &c. Three papering tools: RIDGELY TRIMMER with three patent dates; knife with rounded edge; a small wooden burnishing wheel; and a WARNER combined knife and marking or pricking wheel with wooden handle.

290 - Two pad saws: one ebony & brass and a beech model Two pad saws: one ebony & brass missing one of the blade clamping screws and the blade itself, a nice handle overall; and a beech model with blade, good or better overall.

291 - Lot: LECTRALITE No. 210 slip-joint pliers; VISE GR Lot: LECTRALITE No. 210 slip-joint pliers, very good; a small 4 1/2-inch VISE GRIP, fine; and a DUNLAP 8 1/2-inch slip-joint plier, fine.

292 - Three shoemaker's awls Three shoemaker's awls, two are sharp, one is blunted.

293 - Lot of 10 bitstock bits including for T-augers Lot of 10 bitstock bits including on top two for T-augers; five long auger bits for wood; one with bent end; two long bitstock screwdrivers longer one with flat tang; the shorter has a regular tang; and a long 30-inch bit with pitting.

294 - Ten assorted T-handled gimlet bits, two with iron Ten assorted T-handled gimlet bits incl. two with iron handles; one in center looks like a corkscrew.

295 - Lot: VAN CAMP 8"; unknown 10" plier & a blade Lot: VAN CAMP 8-inch plier with fine pitting; unknown 10-inch plier with two wire cutters, good; and a VAN CAMP blade for iron block plane.

296 - Two OAK LEAF gas pliers; 10-inch & 8-inch Two OAK LEAF gas pliers; 10-inch & 8-inch, both very good.

297 - Lot: OAK LEAF 7" tin snips & 6" OAK LEAF end cutte Lot: OAK LEAF 7-inch tin snips; and 6-inch OAK LEAF end cutter, very good.

298 - Three 8-inch OAK LEAF pliers Three 8-inch pliers: OAK LEAF with three wire cutters; OAK LEAF with two-wire cutters; and an OAK LEAF with rubber handle grips, fine.

299 - Three small OAK LEAF pliers Three small pliers: 6-inch OAK LEAF with round jaws; 5 1/2-inch OAK LEAF with polished or plated finish, fine; and a fine 4.25-inch OAK LEAF with side cutter.

300 - Lot: 3/4-inch socket chisel marked VAN CAMP &c. Lot: 3/4-inch socket chisel marked "THE CELEBRATED RAOLA, VAN CAMP HARDWARE & I CO." VAN CAMP HDWE & IRON CO. cold chisel; and a 6.5-inch VAN CAMP monkey wrench with crack around lower end of movable jaw.

301 - Two OAK LEAF wrenches Two wrenches: 6-inch OAK LEAF wood handled Stillson-type pipe wrench, fine; and a 6.25-inch OAK LEAF wood handled monkey wrench.

302 - Lot: four auger bits incl. OAK LEAF &c. Lot: four auger bits incl. OAK LEAF; BROWN CAMP HDW IOA 12 auger bit; BROWN CAMP HDW IOA 12 auger bit; BROWN CAMP HDW IOA 6 auger bit, all very good.

303 - SIMMONS HARDWARE OAK LEAF iron block plane SIMMONS HARDWARE CO. OAK LEAF No. 120-type iron block plane, VG.

304 - Nice BROWN CAMP HDW IOA drawknife Nice BROWN CAMP HDW IOA drawknife, very good.

305 - Four fine KEEN KUTTER TOOLS Four fine KEEN KUTTER TOOLS: K169 scraper; K98 scraper; K95 scraper & K69 putty knife.

306 - Three KEEN KUTTER Phillips head screwdrivers Three KEEN KUTTER Phillips head screwdrivers with red plastic handles, all very good to fine.

307 - Three SHAPLEIGH KEEN KUTTER K65 linoleum knives Three SHAPLEIGH KEEN KUTTER K65 linoleum knives, two with block & wedge logo and one with name spelled out. All very good to fine.

308 - Four KEEN KUTTER flat bladed screwdrivers Four KEEN KUTTER flat bladed screwdrivers with red plastic handles, all very good to fine.

309 - Lot: two wooden handled KEEN KUTTER screwdrivers & Lot: two wooden handled KEEN KUTTER screwdrivers; a flat bladed screwdriver with red plastic handle, a Keen Kutter yellow plastic handle for a socket chisel and a small unmarked saw blade.

310 - Nine KEEN KUTTER & Shapleigh tools Nine KEEN KUTTER & Shapleigh tools: KEEN KUTTER hoof trimmer with stag handle, some very mild pitting on blade; two awls SIMMONS with round head and KEEN KUTTER with two flats in handle both VG; fine KEEN KUTTER Lutz-type file handle; KEEN KUTTER tack lifter fine; Keen Kutter KPPII Phillips screwdriver with yellow plastic handle; and wood handled awl with block & wedge logo stamped into wooden handle, fine; and an E.C. SIMMONS KEEN KUTTER K85 butt gauge, very good to fine.

311 - Pair of HSB&CO REVONOC iron block planes Pair of HSB&CO REVONOC iron block planes: one similar to a Stanley 120 with early style lever cap, complete with original blade and good knob, fine; and one similar to a Stanley 9 1/2 that also has the early-type lever cap, nice orignal blade, this one was made by Stanley, very good to fine overall.

312 - Two HSB&CO O.V.B. (Stanley) sliding bevels Two HSB&CO O.V.B. (Stanley) sliding bevels with rosewood handles.

329 - RANDALL & COOK ALBANY wedge locking plow plane RANDALL & COOK ALBANY (NY) wedge locking plow plane with repairs to both brackets, one blade and a display stand included.

330 - Nice STANLEY double bit axe Nice STANLEY double bit axe.

331 - Three wooden molding planes Three wooden molding planes: 8-inch skewed 1 3/4-inch rabbet, H.G. BULLEN stamped into both ends, VG; a single boxed 1-inch side bead, has part of cursive name BROWN on toe, new piece of boxing ahead of iron, there are two screw holes on side ahead of cutter that probably held countersunk screws to keep a crack from opening, good overall; and a skewed rabbet that is missing a nicker, and a wooden shim has been added in the mouth to accommodate a blade not original to the plane.

332 - Unknown make wedge-locking plow plane Unknown make wedge-locking plow plane with display stand, plane has brass tipped arms, a screw operated depth stop, a steel skate with brass stiffener, one wedge is very good, the other has part of the end broken off, the former owner tagged it W. BUTCHER 1819-1870, but only the iron is marked with the Butcher name, very good overall.

333 - Two wooden molding planes Two wooden molding planes: 7/8-inch OHIO TOOL CO. No 48 dado plane with screw operated depth stop, nicker intact but nicker wedge is a crude replacement, escapement has been altered; and a 1 1/2-inch A.C. BARTLETT'S OHIO PLANES No. 113 twin iron nosing plane, complete and

334 - Unknown make unhandled wedge-locking plow plane Unknown make unhandled wedge-locking plow plane with brass tipped arms, a screw operated depth stop, brass church windown, blade wedge is cracked, arm wedges or OK, comes with a single ATKINS & SONS iron, comes with a wooden display stand, very good overall.

335 - Four wooden molding planes Four wooden molding planes: fine CHAPIN-STEPHENS UNION FACTORY No. 183, 1 1/4-inch twin iron nosing plane; unknown make skewed rabbet the tag on it says UNION PLANE CO. we can see part of logo on the toe but cannot make it out; CASEY & CO. AUBURN 1/4-inch fully boxed side bead, very good; and a fine MOSES HASTINGS NY 8/8 or 1-in. tongue plane, with eagle stamp on toe.

336 - W. SARJENT, READING (England) beech plow plane W. SARJENT, WEST STREET, READING (England) wedge-locking unhandled beech plow plane with brass-tipped arms, brass church window, interesting brass escutcheons under the screws that secure the fence to the brackets, both wedges broken and should be replaced, comes with dark-stained display stand and will display well.

337 - Pair of wooden molding planes Pair of wooden molding planes: AUBURN TOOL CO. moving fillister with screw-operated depth stop, intact nicker, good fence, good boxwood boxing, very good overall; and a homemade wooden match plane, very well executed with steel skate on the grooving side and sheet steel tacked to both sides of skate,

338 - Stanley No. 24 transitional smooth plane, T-logo Stanley No. 24 transitional smooth plane, T-logo blade has 1/2-inch usable length remaining, throat could use patching.

339 - Pair of size 6 hollow molding planes Pair of size 6 hollow molding planes (rounds to you U.K blokes): GREENSLADE BRISTOL with the EXHIBITION METALS, very good to fine; and a NELSON that is also marked J JACKSON, cabinet pitch, very good.

340 - Three wooden molding planes incl. gunstocker's Three wooden molding planes including scarce gunstocker's 8 1/2-incn plane, very good; a J.J. VINALL CLEVELAND 2/8 dado that has a wooden depth stop, is missing the wedge, nicker and the front 1 1/2-inches of the wooden skate; and a 1 1/8-inch cove that is good or better.

341 - FINE SHAPLEIGH DIAMOND EDGE brick hammer FINE SHAPLEIGH DIAMOND EDGE DEB24 brick hammer with fine marked original handle.

342 - Three hardware hammers Three hardware hammers: fine DIAMOND EDGE tack hammer with logo stamped into top of head, handle has hang hole, very good to fine; a very good SHAPLEIGH'S ball peen; and a large DIAMOND EDGE No. 2 machinist or riveting hammer, with fine original handle.

343 - SHAPLEIGH DIAMOND EDGE prospector's hammer Scarce SHAPLEIGH DIAMOND EDGE prospector's hammer with small hang hole in very good original handle, very good overall.

344 - Three hardware hammers Three hardware hammers: small DIAMOND EDGE tack hammer, very good; small DE riveting or machinist hammer; and a SHAPLEIGH'S DIAMOND EDGE No.0 ball peen with very good original handle.

345 - Two hardware brick hammers Two hardware brick hammers: DIAMOND EDGE DEB24 with fine original handle, fine overall; and a SHAPLEIGH'S No.1 with hang hole in end of the handle that has blown out, some light pitting on head, good overall.

346 - Set of 10 O.V.B. bitstock auger bits Set of 10 O.V.B. bitstock auger bits that were all tied together and came from the late Al Smitley collection along with most of the other hardware branded tools in this sale.

347 - Pair of pliers: H.S.B. & CO. REVONOC & an O.V.B. Pair of pliers: H.S.B. & CO. REVONOC lineman's pliers with side cuter, fine; and a 10-inch pair of O.V.B. with two wire cutters, both wire cutters have been chipped.

348 - Simmons Portable Barometer & thermometer Pat. 1877 Simmons Portable Barometer & thermometer Patented Nov. 13, 1877 in nice mahogany cast that is 38-inches tall. Sorry, no shipping on this lot as it contains mercury.

349 - Two railroad tools: HUBBARD tie tongs & track pair Two railroad tools: a pair of HUBBARD tie tongs and a pair of tongs that two men would use to lift a piece of track.

350 - 38 1/4" HAYDEN & GIRRARD barometer & thermometer FINE 38 1/4-inch tall HAYDEN & GIRRARD AUBURN N.Y. barometer & thermometer in a fine mahogany case. The barometer vial is 20-inches long; the thermometer vial is 5-inches. Because these contain Mercury which cannot be shipped this lot cannot be shipped.

351 - Lot: cooper's hand adz; iron bodied shave & reamer Lot: pitted cooper's hand adz; pitted cooper's iron bodied shave with 4-inch pitted blade, wooden handles; and a homemade T-handled reamer.

352 - TOMAHAWK MFG CLEVELAND leaf spring greaser TOMAHAWK MFG. CO. CLEVELAND O, Manzel Patent leaf spring greaser, patented OCT. 17, 1916, some rust, will clean to fine overall.

353 - ARMSTRONG 13" hex boxed wrench & a nail puller ARMSTRONG 13-inch hex boxed wrench marked ILLINOIS ENGINEERING COMPANY CHICAGO, very good; and a BRIDGEPORT No. 56 SUREGRIP nail puller, very good.

354 - Three wood planes: marked HAYNER ALTON ILL &c. Three wood planes: 22-inch jointer marked HAYNER ALTON ILL along with the No. 21, well worn with big splinter peeling from top, cracked handle, etc.; 16-inch wooden jack plane with open tote, front knob, OHIO TOOL THISTLE BRAND iron with chipbreaker, body looks like mahogany, will make good user; and a CONWAY TOOL CO. handled 7/8-inch tongue cutter, fine.

355 - Two tobacco tools: a rolled spear & a chopper Two tobacco tools: a rolled spear, and a tobacco chopper with steel blade riveted to wooden handle, the pistol-grip portion of handle is broken and has bolt passed thru it.

356 - Stewart Bros. telegraph/telephone line tester pat. Stewart Bros. Patent telegraph/telephone line tester Patented 11-15-15 wooden case with leather top & shoulder strap, intact magneto & crank.

357 - Nice JACKSON 10-inch steel back saw Nice JACKSON 10-inch steel back saw with open handle held by two split nuts WARRANTED SUPERIOR medallion, will make great user.

358 - Three small hand saws for parts or restoration Three small hand saws for parts or restoration.

359 - Pair of back saws incl. GROVES & SONS SHEFFIELD Pair of back saws incl. GROVES & SONS SHEFFIELD also marked Made for MULLINS & MICKLETHWAITE with brass back, plate pitted on both sides, good handle; the other has a GEO. BISHOP & CO. medallion steel back with very mild pitting on both plate and back, nice handle & medallion.

360 - Three panel saws: Disston 23 1/2" No. 16 &c. Three panel saws: Disston 23 1/2-inch No. 16, has crack around the medallion whch is loose, slight kink in plate, faint etch, needs work; 20-inch D8, complete and very good; and 22-inch Disston Model? no etch visible, scuffed but intact handle, good Disston medallion, intact nib on fairly straight plate, will make good user.

361 - Pair of HSB & Co. shears Pair of HSB & Co. shears, fine.

362 - Nice O.V.B. bung auger Nice O.V.B. bung auger, top in what looks like original green paint, very good.

363 - Two O.V.B pliers Two pliers: 10-inch O.V.B. gas pliers, fine; and 10-inch O.V.B. pliers with three wire cutters, very good.

364 - Fine O.V.B. No. 500 portable saw vise Fine O.V.B. No. 500 portable saw vise, marked PAT. APPLIED FOR.

365 - Two O.V.B. rosewood handled squares Two O.V.B. rosewood handled squares: 4 1/2-inch try square, fine; and a 5 3/4-inch try & miter square, fine.

366 - H.S.B & Co. O.V.B. point of sale display block Unusual HIBBARD SPENCER & BARTLETT O.V.B. point-of-sale wooden display block for PIN PUNCHES; LONG TAPER PUNCHES; COLD CHISELS; and PRICK PUNCHES and CENTER PUNCH in original blue paint with fine paper label.

367 - Two H.S.B. & Co. long handled scrapers Two long handled scrapers: H.S.B. & CO. REVONOC (Stearns) complete and very good; and a H.S.B. & CO. O.V.B. NOV. 6, 1906 Patent scraper, fine.

368 - Two O.V.B. (Stanley) rosewood handled sliding beve Two O.V.B. (Stanley) rosewood handled sliding bevels: one with 10-inch blade one with 6-inch, both are fine.

369 - Unusual & fine O.V.B. hand drill Unusual & fine O.W.B. (O.W. BULLOCK) hand drill with small storage compartment in handle for bits and a rosewood cap on top, rosewood crank handle, fine overall.

370 - Three H.S.B.& CO. rosewood handled squares Three H.S.B.& CO. rosewood handled squares: 7 1/2-inch try & miter, fine; 7 1/2-inch try, fine; and 9-inch try & miter, fne.

371 - Three nice O.V.B. concrete edging tools Three nice O.V.B. concrete edging tools.

372 - 3 DIAMOND EDGE hammers: 2 brick hammers & a tack Three DIAMOND EDGE hammers: two brick hammers and a tack hammer with the logo stamped into the top of the head, all very good to fne overall.

373 - Unusual 16-inch wooden plane with the O.V.B. logo Unusual 16-inch wooden plane with the O.V.B. logo on the toe, a nice A.C. BARTLETT'S blade, has deep gouge or chip from the just behind the toe, in good to very good overall condition.

374 - H.S.B. & CO. O.V.B. wooden bit box with bits Fine HIBBARD SPENCER BARTLETT & CO. O.V.B. wooden bit box with 12 IRWIN PATTERN bits, box has a nice swing-out lower section that houses the five bigger bits, the paper label on inside of lid is very good; the only apology is the top half of the clasp that holds the lid shut is MIA, a great box with very good usable set of bits.

375 - Rare Mittendorfer Strauss Pat. goat's head hammer Scarce & fine Mittendorfer Strauss Patent goats-head claw hammer, this is the second that the late Dave Wingo had and it's the first one we have seen that has the patent number on the claw. As good as they get.

376 - Pair of H.S.B. & CO. O.V.B. oil cans Pair of H.S.B. & CO. O.V.B. oil cans: the shorter one has a 3-inch spout and the taller has a 9-inch spout, both have logos embossed into caps, both are fine.

377 - Pair H.S.B. & CO. REVONOC iron block planes Pair H.S.B. & CO. REVONOC iron block planes: one similar to a No. 110 has light to moderate pitting on the sole, a repanted bed and cap, nice proper iron; the other is similar to a Stanley No. 9 1/2 and is complete and fine.

378 - Another H.S.B. & CO. O.V.B. 2-tier auger bit box Another H.S.B. & CO. O.V.B. 2-tier auger bit box with lower tier that swings open, has a great paper label on inside of box, one hinge has been replaced, a very good box overall and ready to fill with your set of O.V.B. bits.

379 - Two H.S.B.&CO. oil cans Two H.S.B.&CO. oil cans: an O.V.B. with 3-inch spout, very good; and one embossed H.S.B. & CO. CHICAGO with 3-inch spout, both are fine.

380 - Two H.S.B. & CO. REVONOC iron block planes Two H.S.B. & CO. REVONOC iron block planes: one similar to Stanley No. 110, complete and very good; and one similar to a Stanley No. 120, complete and very good.

381 - Two H.S.B. & CO. oil cans Two H.S.B. &CO. oil cans: one on left has a repainted body, the top is embossed with the H.S.B. & CO. logo as well as the OVB; the one on the right has the same logo cast into the cap, it is very good, but has traces of oil in it and it had stained the wrapping papper we had it in. We will put both into plastic bag to avoid staining anything.

382 - Pair H.S.B. & CO. O.V.B. rosewood sliding bevels Pair of H.S.B. & CO. O.V.B. rosewood handled sliding bevels, both have 8-inch blades and both are fine.

383 - Three large O.V.B. screwdrivers Three large O.V.B. screwdrivers: one on bottom has chipped and dinged handle, good or better; center one is very similar and the handle is in similar condition; the top one has a wooden fluted handle and a later HSB & CO OVB logo, fine.

384 - Four O.V.B. bevel edged socket chisels Four O.V.B. bevel edged socket chisels that all need handles; two 1-inch, one has a bit of damage to top of socket; one 7/8-inch and one 3/4-inch all are very good.

385 - Two H.S.B. & CO. oil cans Two H.S.B. & CO. oil cans: taller one on left has H. S. B. & CO. OVB logo embossed in top of cap, fine; shorter one has the same logo embossed into top of cap and is fine also.

386 - Five O.V.B. tools: gouge; bevel; awl &c. Five O.V.B. tools: 3/8-in. gouge, fine; 1 1/4 EVERLAST-type with multiple Wood's patent dates; two 3/4-inch bevel edged chisels; and an awl with AUG. 21, 1906 Patent Date, very good.

387 - Two different H.S.B. & CO. REVONOC 8-inch pliers Two different H.S.B. & CO. REVONOC 8-inch pliers: one lineman's type with side cutter; and one electrician's type with two wire cutters, both are very good.

388 - Three H. S. B. & CO. tools: small rasp & 2 files Three H. S. B. & CO. tools: small rasp marked HIBBARD, very good; and two large OVB files, both very good.

389 - An OVB portable saw vise An OVB portable saw vise, the lever that locks a saw in has been replaced with a bent bolt, will make a fine user.

390 - Lot of 10 OVB chisels and a gouge Lot of 10 OVB chisels and a gouge: 1 1/4-inch butt chisel that needs a handle, VG; heavy duty 3/4-inch, need a cleanup grind to leading edge; 3/4-inch that has been sharpend to a rounded profile, needs handle, VG; 1/2-inch that needs leading edge cleaned up, VG; another 1/2-inch that has a patch or two of very light pitting; 3/8-inch that needs leading edge cleaned up, VG; 3/8-inch mortise chisel, VG; 1/4-inch mortise chisel with light pitting; 1/4-inch complete and very good; and a 3/8-inch gouge that needs a handle, fine.

391 - Nice 9 1/2-inch HIBBARD oil can Nice 9 1/2-inch HIBBARD oil can, has HIBBARD CHICAGO in cap screw, fine.

392 - Fine 16-inch OVB tin snips Fine 16-inch OVB tin snips.

393 - Nice 30-inch SHAPLEIGH HARDWARE DIAMOND EDGE Nice 30-inch SHAPLEIGH HARDWARE DIAMOND EDGE (ACME) plumb & level, both vials intact, very good overall.

395 - 29 3/4" NORVELL-SHAPLEIGH HDW CO. (ACME) level Nice 29 3/4-inch NORVELL-SHAPLEIGH HDW CO. (ACME) plumb & level in what appears to be a mahogany stock, both vials intact, fine.

397 - 28" NORVELL-SHAPLEIGH HDW CO. (ACME) level Nice 28-inch NORVELL-SHAPLEIGH HDW CO. (ACME) plumb & level in what appears to be a mahogany stock, both vials intact, very good.

400 - Lot of four wooden molding planes Lot of four wooden molding planes, all unmarked, one is missing an iron, fair to good condition.

401 - Lot: auxiliary handle for crosscut saw &c. Lot: auxiliary handle for crosscut saw; large lever cap for transitional plane; SCHERR TUMICO ST. JAMES MINN No. 43N12 12-inch steel scale/rule; COM64 flat steel multi wrench; leather pouch with four punches and a nail set; HUGH REILLY CO. PAINTS & GLASS bottle opener marked on back "HANG ME IN THE KITCHEN"; center head for combination set, no screw; etc. Eight items in all.

402 - Two British G. Eastwood, York, molding planes Two British G. Eastwood, York, molding planes: A No. 15 round; and a side rabbet with a stair-stepped iron and boxwood bottom. Both very good

403 - Lot: chisel that looks like plow plane iron; assor Lot: chisel that looks like a plow plane iron; box of assorted files; Stanley 15-210 hack saw; fine D.R. BARTON 3/4-inch tang chisel; unknown make 1-inch gouge that needs a light cleaning; and a small SIMONDS SAW CO. panel saw, has some mild pitting on back side, good handle and medallion.

404 - Wooden plow plane stand Wooden plow plane stand, needs cleaning and possibly some scuffs attended to.

405 - Lot: 2 razor knives; 4 wire strippers& putty knife Lot: small razor knife; GARDNER BENDER wire stripper; SNAPIT wire stripper; SYCAMORE ILL wire stripper; STANLEY 10-989 razor knife; GARDNER BENDER No. GS-394 wire stripper; and a putty knife with wooden handle. Seven items in all.

406 - Two British J. Buck wooden molding planes Two British J. Buck wooden molding planes: A No. 14 hollow with the 91 Waterloo Rd. mark (1844-1863); and a complex molding plane with the (White?)chapel mark. Both complete and very good.

407 - Lot: Stanley plastic handled butt chisel; tack ham Lot: Stanley plastic handled butt chisel; tack hammer; Stanley 6-in. try square; stitching or pricking wheel; small tack lifter; E.A. BERG butt chisel needs handle; adjustable steel square with intact level and scribe; and a small keyhole type saw with long wooden handle, interesting.

408 - Five A.C. Bartlett wooden planes Five A.C. Bartlett wooden planes: Four are marked A.C. Bartlett's Ohio, with a No. 66 1/2 tongue marked A. C. BARTLETT PRES'T. Other planes are: two-blade groover missing one set of wedge and iron, has a steel fence; a 7/8, complete and very good; a small bead, missing the iron; a 5/16 bead, very good.

409 - Short throw PS&W? No. 8006 ratchet brace Short throw PS&W? No. 8006 ratchet brace with locked up heavy-duty chuck, chipped handle.

410 - J. T. Loomis nosing plane for making chair rails J. T. Loomis (Hartford, Connecticut, 1847-1863) ** mark 1 3/4" nosing plane for making wide chair rails. Double iron, one iron made by Dwights, French & Co., the other by P. H. Geysville Mfg. Co. Excellent condition. Includes a framed copy of the Loomis family tree created by late tool collector Howard Loomis which documents J.T. (Joseph Talcott) Loomis' family history and how it connected with Howard's own branch of the Loomis family. This was certainly part of an M-WTCA meeting display which included this plane, as well as those in lots 412 and 414.

411 - GOODELL-PRATT CO. 2-speed hand drill with intact c GOODELL-PRATT CO. 2-speed hand drill with intact chuck, good wooden main handle, crank handle has cracked ferrule, missing auxiliary handle, very good overall.

412 - Two J. T. Loomis Hartford molding planes Two J. T. Loomis Hartford (Connecticut, 1847-1863) ** mark molding planes: No. 18 hollow; and a 1 1/2" skew rabbit, with iron made by Dwights & Foster, Seymour, Connecticut. Both very good.

413 - Five assorted T-augers Five assorted T-augers including one that looks like a patented model.

414 - J. T. Loomis Hartford complex molding plane J. T. Loomis Hartford (Connecticut, 1847-1863) ** mark complex molding plane with Grecian ogee and bevel, iron by Barry and Way (1842-47, N. Y.) Excellent condition.

415 - Three 26-inch hand saws for parts or restoration Three 26-inch hand saws for parts or restoration: DISSTON with 10ppi plate, missing one of the saw nuts, very faint etch; Disston D20, with 8?ppi plate, good etch, fine handle, VG; and a thumb hole handled saw with 6ppi plate missing one saw nut, plate has rust on both sides, etch is gone.

416 - Pair of Continental wooden planes Pair of Continental wooden planes: Screw arm adjustable plow plane with a wide fence, rear arm is cracked and repaired with a wire wrapped tightly around the first thread, missing the wedge; and a horned plane, missing the iron and with damage to the wedge and horn.

417 - Three assorted 26-inch hand saws Three assorted 26-inch hand saws: on bottom a newer model with STRAIGHT FILED, FAST CUT marked blade, fine; above it a BISHOP No. 1933-N with nice handle with WARRANTED SUPERIOR medallion, VG; and on top an earlier saw with deep WARRANTED SUPERIOR medallion, plate rusted on both sides, handle was likely held with split nuts originally and one remains, but others have been replaced with more modern fasteners.

418 - Three unusual and earlier wooden planes Three unusual and earlier wooden planes: a homemade plane for cutting a small v-notch which has an iron held in place by screws, missing what was likely a boxed fence; an early 10 1/4" long side bead, very good; and a smaller 7 1/2" long early plane, also very good.

419 - Three 26-inch saws: two Disston and one unknown ma Three 26-inch saws: Disston with thumb hole handle, top spur broken off, plate has three teeth broken off in the final 7 1/2 inches, faint etch; unknown make with C.E. JENNINGS & CO medallion on back side of handle; all the screws are loose, light rust on plate; on top a Disston with 7ppi plate, decent etch, intact nib, with light cleaning will be very good.

420 - Three Scottish planes Three Scottish planes: ALEX'R MATHIESON & SON, EDINBURGH, 5/8 marked as "Grooving Plows", very good; A. MATHIESON & SON, GLASGOW 5/8 with steel fence, no iron; and a 6/8 MATHIESON, fair.

421 - Two 26-inch hand saws: Disston & SIMONDS SAW CO. Two 26-inch hand saws: on bottom a Disston with faint etch, 8ppi plate, needs light cleaning, will make great user; and a SIMONDS SAW CO. saw with about an 8ppi plate, light rust, handle has crack around the second bolt from bottom, good SIMONDS medallion, should clean to usable condition.

422 - Lot of 5 wooden molding planes Lot of 5 wooden molding planes: H. L. James, Williamsburgh, Mass. 1/4" side bead, boxed, very good; Greenfield Tool Co., Mass. (faint mark), bead, missing an iron and with a damaged wedge; ? Benson mark (possibly J. Benson?) large bead, damaged wedge and rusty iron; H. Wells, Northampton, Mass. 1 3/8" skewed rabbet, very good; and a Lyon & Smith, CinT, (Cincinnati) Ohio, moving fillister with damaged boxing.

423 - Nice 26-inch RICHARDSON miter box saw Nice 26-inch RICHARDSON miter box saw, nice RICHARDSON medallion on the fine handle, very good overall.

424 - Pair of British planes: Cox & Luckman Pair of British planes: Cox & Luckman, Birmingham, 1/2 with steel fence, includes a rusty Ash & Co. iron that was apparently not original to the plane given the "no iron" note on Howard's tag for the plane, otherwise very good; and a COX LUCKMAN & SON LONDON complex molding plane, very good.

425 - IDEAL SCHOOL SUPPLY CHICAGO wooden paper cutter Nice IDEAL SCHOOL SUPPLY CO. CHICAGO, ILL wooden paper cutter, fine usable condition.

426 - Three wooden T-auger handles incl. nice PS&W Three wooden T-auger handles including a nice PS&W patented model; a similar patented on that is very weathered, rusty and mouse chewed; and a simple one with an attached iron plate.

427 - Lot of 7 wooden molding planes Lot of 7 wooden molding planes: Ohio Tool Co. 1 3/4, no wedge; Ohio Tool Co. fillister, 7/8, no iron and no wedge or iron at front; body only of an unmarked 11" plane with a small bead, has an older replacement for a fence; unmarked 1 1/4" round, very good; unmarked 1/4" side bead, rosewood boxing, very good; unmarked 5/8" bead with an earlier round wedge, very good; and an unmarked 3/8" round missing a wedge.

428 - Lot: PS&W hanging spring scale & Stanley No. 80 sc Lot: PS&W hanging spring scale that weighs up to 50lbs, VG; and a Stanley No. 80 cabinet scraper, that needs a blade, very good.

429 - Lot of five mostly New York planes Lot of five mostly New York planes: Handled A. & E. Baldwin 3/4 tongue; handled A. & E. Baldwin 8/8 tongue, missing wedge; A. Monty, Roxton Pond P.Q. (Quebec) handled tongue, no wedge or iron; handled D.R. Barton Rochester 8/8 tongue; and an A. & E. Baldwin 3/4 bead molding plane, marked 5/8, very good.

430 - Lot: 13 assorted bitstock augers & gun-cleaning ro Lot: 13 assorted bitstock augers for wood, plus a 3-piece wooden gun-cleaning rod, the brass brush is missing from one end.

431 - Three chisels and a gouge Three chisels and a gouge: 1 3/4-inch tang chisel with crude wooden handle with iron rings top and bottom; BUCK BROS 1 1/4 tang chisel with a few chips at leading edge, will need to be reground; small 1/8-in. WARD chisel, VG; and a BUCK BROS 1/2-inch gouge with big chuck of wooden handle broken away, gouge itself is very good.

432 - Pair of adjustable bitstock hollow augers Pair of adjustable bitstock hollow augers, one is missing the tang that goes into the brace, but it has the often missing depth stop, some rust, will clean to VG; and another one that is missing the depth stop but is otherwise complete and just needs a light cleaning.

433 - Three Stillman Patent saw sets Three Stillman Patent saw sets; two smaller ones and one large.

434 - Two ratchet braces; one has unusual adjuster; othe Two ratchet braces; one has unusual adjuster for direction of spin; it's very good overall; the other is a PEXTO 5310, it is very good.

435 - Lot: two saws; soldering iron & two English turnsc Lot: two saws, the smaller one has a Millers Falls decal on the handle and a rusty frame; a small soldering iron; and two English turnscrews one with loose blade and the other has a bit of rust on the blade.

436 - Lot: VAUGHAN claw hammer head; two screwdrivers & Lot: large VAUGHAN claw hammer head, needs handle; two wood handled screwdrivers; C.E. JENNINGS Arrowhead Brand adjustable wood auger in original punch; and a claw hammer with badly abused face.

437 - Lot: two paint scrapers; small brush; scraper body Lot: two paint scrapers one marked WARNER TOOLS; a small brush with rolled steel handle; small scraper body with wood handle for holding razor blades; a big flat putty knife and two narrow putty knives; one marked WARNER with rosewood? handle.

438 - Lot: 9 assorted extra-long auger bits & a star dri Lot: 9 assorted extra-long wood auger bits; and a star drill for punching thru concrete.

439 - Lot: two braces incl. early Millers Falls non-ratc Lot: two braces incl. early Millers Falls non-ratcheting; and an all-iron brace that is missing the spring and the lever from the chuck, rusty; a GREEN THUMB folding limb saw No. 306-100 with wooden handle; and a long wooden hammer handle.

440 - Lot: Two Fiege Patent cable clamps; brass door kno Lot: Two Fiege Patent cable clamps U.S. Pat. No. 1,855,227; small brass door knocker; butcher saw punch?; DROP FORGED claw hammer head; center punch; and a WILLIAMS 1/2-inch No. A 4-616 socket that is on hex shaped shaft.

441 - Three hand saws Three hand saws: 28-inch rip with WARRANTED SUPERIOR medallion, good handle, light rust on the blade; ATKINS 26-inch with fine handle & medallion; several broken teeth, it would be advisable to plane on starting over with all-new teeth; and a 26-inch DISSTON with faint etch, 8ppi plate, handle missing rear bit of the top horn, some light rust, will make a decent user.

442 - Three brushes, including Shaker-style horsehair cl Three brushes: a round Shaker-style horsehair clothes brush, marked ? Brush Co. 13 EXTRA, 11" long and about 2 1/2" diameter, does have one single socket at edge with the bristles mostly ripped out (see picture), plus two additional vintage paint brushes, the larger 3" by 11" and the smaller 3" by 9 1/4, with a black and white banded tip on the handle. All very good.

443 - Three sharpening hones or whetstones in wooden box Three sharpening hones or whetstones in wooden boxes: two 7" x 2" x 1" stones each in a nice wooden box, a few minor chips at edges; and a smaller CRAFTSMAN stone measuring 5" x 2" x 3/4" inside a wooden box with label on top and round black feet on bottom half. This two-sided stone has a serious chunk missing.

444 - Four marking gauges and mortise scribes Four marking gauges and mortise scribes missing thumbscrews. Includes a Stanley No. 65 and a Stanley No. 66 that is marked with Patent Aug. 5, 1873. All good for parts or restoration.

445 - Three Carborundum sharpening hones in boxes Three sharpening hones or whetstones in pasteboard boxes from the Carborundum Company, Niagara Falls, N.Y., plus a small fourth stone: 8" by 2" by 1" stone, has a couple of minor chips in stone's edges, box is very good; a second with most of label on side of stone is intact, 6" by 2" by 1" stone is near fine, box is very good; and the smallest stone, in a black box has two different sharpening grade sides, near fine, box very good; plus a small loose stone with a large gouge on top, 3" by 7/8" by 3/8".

446 - Lot of three wooden mortising gauges Lot of three wooden mortising gauges, including one with burl? wood, and one homemade and primitive.

447 - Lot of 5 vintage scissors and shears Lot of 5 vintage scissors and shears: RK? 10 1/2" long, with traces of black painted handles; AL? ROWL? N.Y. mark that has been repaired (and obliterated part of the mark), 12 3/4" long, some black paint on handle; Clauss U.S.A. #3768,9 1/2" long, with most of black paint on handle intact, very nice pair; Dandy Patented, 8 1/2" long and rusty; Flour City, with both a mark and script on one shear, 8" long, very good.

448 - Three marking and mortising gauges Three marking and mortising gauges: Stanley No. 98, with a Stanley Sweetheart screw, missing the second beam; a wooden and brass Stanley Sweetheart No. 77; plus an unmarked Stanley No. 77, both are in need of a good cleaning.

449 - Pair of boxwood spokeshaves by Wm. Marples & Sons Pair of boxwood spokeshaves. Both marked Hibernia Wm. Marples & Sons Sheffield mark, though the smaller has a very faint mark. Both also are marked with owner's name E. Cufflin. Very good.

450 - Lot of four wooden mortise gauges Lot of four wooden mortise gauges. All very good examples of handmade work.

451 - Six nice usable blades for Stanley No. 4 or No. 5 Six nice usable blades for Stanley No. 4-sized smooth planes or No. 5-sized jack planes; four are complete with chipbreakers screwed to them, one has a chipbreaker but no screw; and a little used BB-logo is just a blade with no chipbreaker.

452 - Lot of 17 bitstock tools incl. 9 different sized c Lot of 17 bitstock tools incl. 9 different sized center bits; countersink; four gimlet bits, etc. The tag says D. STANLEY 3-28-92 Lot No. 1183. A fine bunch in a nice green felt roll.

453 - Lot: Irwin bit roll with four assorted bits; Green Lot: Irwin bit roll with four assorted bits; Greenlee box with two assorted bits & a file; two flat-bladed screwdrivers; a reamer; and a SNELL & ATHERTON iron leather shave.

454 - GLOBEMASTER 12-piece wood carving set No. 5958 GLOBEMASTER 12-piece wood carving set No. 5958 missing one, so there are 11 tools in the roll.

455 - Lot: DELTA No. 815 plug cutting bit; Forstner bit Lot: DELTA 1/2-inch No. 815 plug cutting bit; unknown make Forstner bit; and five assorted twist drill bits; a drafting triangle marked N.E. SUNDQUIST; and three blades for iron spokeshaves.

456 - Lot: Union Factory H. CHAPIN Yankee-style plow &c. Lot: Union Factory H. CHAPIN Yankee-style plow that is missing blade & wedge & has two broken & repaired handle brackets; a handled A. HOWLAND screw-arm plow plane missing blade and wedge, good fence, nuts and main body, the depth stop is MIA; also included are two arms with nuts for a screw-arm plow; a fence for wooden plow with two broken arms; and a 2-piece steel skate and complete depth stop from another plow

457 - Lot: Ball peen hammer; rosewood try square &c. Lot: Large ball peen hammer; rosewood handled try square, some very light surface rust on blade; and a sharpening stone in 2-piece wooden box, VG.

458 - Lot: Jig saw; DUNLAP ratchet brace &c. Lot: Small jig saw; DUNLAP ratchet brace missing top handle; Yankee North Bros. No. 2100 ratchet brace, good working order, top handle needs new wood; and an unknown make ratchet brace with 2-piece wrist handle held with pewter rings; chuck is frozen and no top handle.

459 - Three jack planes Three jack planes: UNION NO. 27 transitional with good knob, the tote is broken in center and missing most of the top spur; ARROWMAMMETT WORKS wooden jack with both thru the front end to keep crack closed; and another unknown make wooden jack, needs little to get it working again.

460 - Lot: large expansive bit; adjustable wooden bevel Lot: large expansive bit; adjustable wooden bevel; small soldering iron; and a striking tool?

461 - Six assorted wooden handled T-augers Six assorted wooden handled T-augers all in good or better overall condition.

462 - Three large bits for T augers, the largest is 2-in Three large bits for T augers, the largest is 2-inches.

463 - Four transitional bench planes for parts or restor Four transitional bench planes for parts or restoration: DIAMOND EDGE jack plane with bent lateral lever, need blade, lever cap and a proper tote; Stanley No. 35 needs tote blade and lever cap; Stanley No. 23 needs blade, lever cap and lateral lever; early Stanley No. 22 with eagle logo on toe, comes with body, frame, a broken frog and a good lever cap.

464 - Twelve assorted tools: awls; shoe knife; putty kni Twelve assorted tools: Ryan Tool awl; several shoemakers awls; shoe knife; two rosewood handled putty knives; a screwdriver for Stanley 45 plane, etc.

465 - Three Starrett tools: two screw pitch gages & a fe Three Starrett tools: No. 473 screw pitch gage with tattered original box; a larger No. 155 United States Standard (Also for S.A.E.) Screw Pitch Gage with decent original box; and a No. 467 feeler gage set that goes from .0015 to .200.

466 - Lot: S.J. ADDIS carving gouge; Addis chisel; awl & Lot: Fine S.J. ADDIS No. 7 carving gouge; an Addis 7/16 chisel; small awl; a J.B. MANN offset wheel; carpenter pencil; and small spatula with curved or bent end.

467 - Nice wooden and glass table-top display case Nice wooden and glass table-top display case that measures 31x22 inches outside and is about 4 1/2 to 5 inches deep, has a piano hinge securing the lid. There is a built-in lock, but we don't have a key.

468 - Lot: all-steel gimlet bit; ignition wrench; brass Lot: all-steel gimlet bit; small ignition or magneto wrench; small brass clamp; brass key ADLAKE railroad lock; small flat steel wrench; graduated brass slide, very good.

469 - Small wooden table-top display case Small wooden table-top display case that is 14 3/4 x 9 3/4-inches outside and about 2 1/2 inches deep, very good overall.

470 - Lot: Millers Falls carving gouge; SARGENT screwdri Lot: Millers Falls carving gouge; small SARGENT screwdriver; 6-inch steel rule from ILLINOIS AUTO ELECTRIC CO. CALUMET 4444; another 6-inch rule advertising MANNING PATTERN CO. WATERLOO IOWA; two Lufkin radius gages; and a small No. 4 blade marked B.C.MULLER with a wooden graver-type handle.

471 - Lot: Wooden handle; bell hanger's gimlet; wrecking Lot: Wooden handle or part of something; bell hanger's gimlet; small wrecking bar; and a extra long quill bit.

472 - Lot: Boxwood spokeshave; awl handle; screwdriver & Lot: Fine little boxwood spokeshave; small awl handle; small screwdriver; and two tool handles in varying states of disrepair.

473 - Fine little ebony smooth plane marked J. JONES Fine little ebony smooth plane marked J. JONES on toe and heel, Howard had this is a table top display case with about 25 other coachmakers planes that he won a display award with at a M-WTCA Tool Show.

474 - SEARS, ROEBUCK & CO. No. 4886 saw set IOB SEARS, ROEBUCK & CO. No. 4886 saw set like new in original box.

475 - Mini ebony compass plane, MARPLES & SONS blade Fine mini ebony compass plane with a MARPLES & SONS extra thick blade, has an old David Stanley No. 812 sticker on the sole, a fine little plane that Howard had in a table top display case with other coachmaker's planes.

476 - Lot: two rosewood handled bevels; a small burnishe Lot: two rosewood handled bevels that need work; one has the lever that locks the blade broken off and the other is missing the bolt that secures the blade to the handle; a small burnisher; butt chisel; homemade wooden bevel; and a wood rasp.

477 - Lot of 15 assorted wood auger bits Lot of 15 assorted wood auger bits including one adjustable and one IRWIN that is blued.

478 - Five wooden levels for parts or restoration Five wooden levels for parts or restoration, all have brass top plates and brass end plates: 30-inch Stanley & C-S & CO. both vials intact in both; 28-inch DISSTON & MORSS both vials intact, VG; 28-inch HENRY DISSTON, both vials intact, top plate broken on end; & 26-inch early Stanley with brass side views, plumb vial intact, level vial MIA.

479 - Lot of 18 handles for socket chisels Lot of 18 handles for socket chisels, most are in good usable condition; one or two have some serious chipping.

480 - Stratton Bros 26" brass-bound mahogany plum & leve Stratton Bros 26-inch brass-bound mahogany plum & level, plumb vial is broken and needs to be replaced; level vial is intact.

481 - Seven assorted tool handles incl. three LUTZ file Seven assorted tool handles inclusing three LUTZ file handles.

482 - Eight assorted levels for parts or restoration Eight assorted levels for parts or restoration; five are 30-inch and three are 28-inch. Most if not all are Stanley.

483 - Lot of 18 assorted handles for tang gouges and chi Lot of 18 assorted wooden handles for tang gouges and chisels and one or two may have been used as file handles.

484 - Four wooden levels: Stanley No. 5; H.C. SON CO. &c Four wooden levels: 24-inch Stanley No. 5, both vials intact, very good; 24-inch H.C. SON CO. PINE MEADOW CONN plumb & level, both vials intact, good or better overall; Stanley No. 5 with V-logo and model number in brass top plate, both vials intact, nice laminated stock, very good; and a 28-inch C-S & CO. the domed screws holding the top plate do not look original, both vials intact.

485 - Lot: 17 assorted bitstock tools Lot: 17 assorted bitstock tools: 8 center bits; 4 screwdriver bits; a bit for split nuts; gimlet bit; shell bit, nosing bit, etc.

486 - Lot: Two saws & three iron spokeshaves Lot: Two saws; and three iron spokeshaves for parts or restoration.

487 - Six wooden saw handles Six wooden saw handles; four for regular handle saws; and two for keyhole saws, both with all the original bolts.

488 - Five assorted T-handled gimlet bits Five assorted T-handled gimlet bits; two with wood handles and three with iron.

489 - Lot: Craftsman back saw No. 3512; mortise chisel & Lot: Craftsman back saw No. 3512 with open handle, fine; 1/8-inch English mortise chisel, fine; and Stanley No. 55-045 wrecking bar, fine.

490 - Two Stanley pocket levels that can be attached to Two Stanley pocket levels that can be attached to a square; one with brass top and one with steel top; the bras top one is missing the screw that would clamp it to a square.

491 - 3 wrenches: CEE TEE; WESTLINE & PENENS CHICAGO Three wrenches: CEE TEE 6-inch slip joint pliers; WESTLINE 5/8 & 3/4 open end; and a No. 4206 6-inch Crescent-type marked PENENS CORP. CHICAGO

492 - Lot: 2 5/16-inch STANLEY lever cap; two cams &c. Lot: 2 5/16-inch STANLEY lever cap for bench plane, fine; two cams for Stanley 45 or 55 planes, one with original screw and brass barrel, the other is missing both; two rosewood knobs; one for 45 with threaded post cast into fence; the other is for a No. 3 sized bench plane; two beech knobs for transitional bench planes; four blades for No. 45 or 55 plows:

493 - Lot: 12 blades and chipbreakers for wooden bench p Lot: 12 blades and chipbreakers for wooden bench planes.

494 - Lot of Stanley tools: No. 40 scrub plane body &c. Lot of Stanley tools: No. 40 scrub plane body with rosewood tote and cracked knob; several iron block plane bodies incl. four No. 110; one No. 120; Stanley No. 4 body; frog for No. 3; transitional lever cap; five block plane lever caps; two bench plane lever caps, etc. Total of 18 items.

495 - Lot of wooden plane parts: four bodies; ten wedges Lot of wooden plane parts: four bodies; ten wedges; and two screw-operated depth stops. Total of 19 parts and planes.

496 - Two Stanley No. 45 plane blade boxes containing 19 Two Stanley No. 45 plane blade boxes containing 19 of the original 23 blades, cutter boxes both have good labels and intact tops. Some good user blades if you got the plane and didn't get blades with it.

497 - Lot: wood scraper; seven totes for bench planes &c Lot: wood scraper that needs blade; and seven totes for bench planes incl. nice No. 2 tote; and a nice pair of big nuts for a screw-arm plow plane or maybe a screw-adjusted sash.

498 - Lot: Three hand saws incl. BUCK LONDON Lot: Three hand saws including BUCK LONDON with die stamped plate and split nuts; Disston thumb hole handle on a plate that isn't original to it; a saw with PHENIX medallion; and a 19 1/2-inch plate for a Disston D8 with fair etch.

499 - Six assorted wooden levels for parts or restoratio Six assorted wooden levels for parts or restoration.

500 - SESSIONS NO. 2 regulator wall clock with original SESSIONS NO. 2 regulator wall clock with original key & bottle of oil. Keeps time.

501 - Four wooden levels for parts or restoration Four wooden levels for parts or restoration.

502 - BROWN CAMP HDW IOA 8-inch drawknife BROWN CAMP HDW IOA 8-inch drawknife, very good.

503 - Lot: Oak Leaf end cutter with nail lifter & a snip Lot: 8-inch Oak Leaf end cutter with nail lifter at end of handle, very good; and an Oak Leaf 6.25-inch. tin snip.

504 - BROWN CAMP HDW IOA 9-inch drawknife BROWN CAMP HDW IOA 9-inch drawknife, fine.