Arrow icon

Auction Information

RESTAURANT / COMMERCIAL / MAN CAVE STAINLESS ONLIN

Mon Oct 25 - 07:00PM


1 Fox Run Drive, Altamont, IL Click to Map


White Auctions and Appraisal Service

Auctioneer's Other ListingsE-mail AuctioneerAuctioneer's Web Site

Auctioneer ID#: 26171

Phone: 6182679082

License: 441.001944

View Full Photo Gallery
  • Auction Preview Image 1

    Auction Preview Image 1

  • Auction Preview Image 2

    Auction Preview Image 2

  • Auction Preview Image 3

    Auction Preview Image 3

  • Auction Preview Image 4

    Auction Preview Image 4

WE NEED YOUR BIDS!

ONLINE ONLY AUCTION BEING HELD AT

WHITE AUCTIONS & APPRAISAL
1 FOX RUN DRIVE
ALTAMONT, IL   62411
(618) 483-9020

CLICK ON AUCTIONEER'S WEBSITE ABOVE TO GET TO THE AUCTION


ONLINE ONLY STAINLESS RESTAURANT / FOOD INDUSTRY AUCTION - WEDNESDAY, SEPTEMBER 29TH, 2021 AT 6 PM CDT THROUGH MONDAY OCTOBER 25TH WITH A SOFT BID CLOSING BEGINNING AT 6 PM CDT SEPARATED BY 30 SECONDS ON EACH LOT. This auction has over 350 lots of slightly damaged to no damage stainless restaurant / food industry items.   

THESE ARE ITEMS THAT CAN BE USED IN RESTAURANTS, BARS, RETAIL STORES, MANCAVES, DEER CAMP, MEAT PROCESSING OPERATIONS, MOBILE FOOD UNITS AND MANY OTHER USES. THERE ARE A FEW PIECES THAT MAY QUALIFY FOR SCRAP OUT BUT THE MAJORITY OF PIECES ARE READY TO PUT TO WORK! THIS IS A SCRATCH & DENT AUCTION WITH SOME UNITS WITH LITTLE TO NO DAMAGE OF RESTAURANT STAINLESS WORK STATIONS, 1 TO 3 BASIN SINKS, WALL SHELVING, WORK TABLES, EQUIPMENT TABLES, WALL CABINETS, LEG SETS AND MORE. EACH LOT IS PICTURED WITH OUR DISCOVERY UPON UNCRATING & REMOVING CARTONS. MULTIPLE PHOTOS WERE TAKEN OF EACH UNIT TO PROVIDE YOU WITH MAXIMUM DECISION MAKING INFORMATION. MOST UNITS ARE MARKED BK - RESOURCES - NO WARRANTIES, EXPRESS OR IMPLIED ARE PROVIDED WITH ANY OF THESE UNITS BY EITHER WHITE AUCTIONS & APPRAISAL SERVICE OR BK RESOURCES. WE WILL ATTEMPT TO MARK THE DAMAGE ON EACH UNIT OR TOTAL LACK OF DAMAGE. IF THERE IS NOT A PHOTO OF THE DAMAGE IT IS MOSTLY INSIGNIFICANT - YOU MAY FIND MINOR SCUFFS, DINGS AND OTHER MINOR INPERFECTIONS THAT MAY OR MAY NOT BE EASILY IDENTIFIED. A FEW ITEMS HAVE MINOR RUST WHICH CAN BE REMOVED WITH STEEL WOOL, OILED AND GOOD TO GO. 

Note: The first photo in most cases will be the manufacturer's catalogue photo followed by actual photos of the items, damage - if any, etc. We have attempted to call out the major damage on each and every lot. Multiple photos were taken and we ask that you review these photos prior to bidding on the item as each item is sold as is, where is without any warranty or guarantee express or implied. We did not note scratches as they are out of carton and there will be scratches and/or rub marks on some of these items, most of which may be able to be buffed out. The entire auction has a wholesale of nearly $200,000 and there are no reserves. The items may be discontinued stock, overstock or damaged as described. 

Most items are shippable at the buyer's expense if needed but we leave it to you to determine the expense that may be involved. Arrangements may be made for delayed pickup but the payment for your purchases must be made on or before the pickup date. SIMPLY - THERE ARE SOME MAJOR BARGAINS THAT ARE JUST WAITING TO BE BOUGHT AT THIS AUCTION!! 

Sales tax will be added to all in-state purchases as the merchandise is "new" and does not qualify for sales tax exemption. The charge in our jurisdiction is 6.5% and will be applied to the final hammer price which includes BP but exclusive of shipping charges. If you are a reseller or not for profit exempt from IL Sales Tax you may provide the proper form prior to pickup and we will remove this fee. We can forward this form to you in advance should you require this. 

NOTE: WE DO NOT USE HIBID'S AUTO PAY FEATURE WHERE YOUR CREDIT CARD IS AUTOMATICALLY CHARGED. WE WILL CALL YOU THE DAY AFTER THE AUCTION AND WORK WITH YOU ON PICKUP AND/OR SHIPMENT AT WHICH TIME WE WILL DISCUSS THE MANNER YOU WILL PAY FOR YOUR PURCHASE. NO UNWANTED CHARGES !! UNITS CAN BE PICKED UP AT WHITE AUCTIONS & APPRAISAL SERVICE IN ALTAMONT BUT CRATING CAN BE ARRANGED FOR ANY UNITS THAT YOU WOULD NEED SHIPPED. SHIPPING WOULD BE AT BUYERS EXPENSE AND WE COULD PROVIDE COST OF CRATING UNITS IF NECESSARY. IF WE HAVE ENOUGH EQUIPMENT BOUGHT IN INDIANA, MISSOURI AND/OR ILLINOIS WE WILL SHIP WITH OUR OWN FREIGHT DIVISION WHICH WOULD SAVE YOU SOME CASH. THIS IS A CHANCE TO OWN GREAT BAR/RESTAURANT EQUIPMENT AT A FRACTION OF ITS NORMAL COST. 

Pickups start on Thursday, October 28th and continue through Saturday, October 30th from 8 AM to 6 PM as scheduled through SignUpGenuis at the Auction Center at 1 Fox Run Drive, Altamont, IL 62411 - These are approximate times and date only - the COVID-19 pandemic rules in effect during the pickup dates will be reviewed nearer this date and the pick-ups will be done with appointment dates & times with registration on SignUpGenius at the conclusion of the auction. We reserve the right to continue this auction as we are adding items prior to its conclusion. 

Use of site: White Auctions & Appraisal Service or it's Sellers cannot, and will not, be held responsible for any interruption in service, errors, and/or omissions, caused by any means and does not guarantee continuous, uninterrupted or error free service or use of the site. Bidder acknowledges that this auction is conducted electronically and relies on hardware and software that may malfunction without warning. 

White Auctions & Appraisal Service, at its sole discretion, may void any sale, temporarily suspend bidding or reschedule the closing date of the auction and resell any items/lots that were affected by any malfunction. The decision of White Auctions & Appraisal Service is Final. 

Indemnification: Buyer agrees to indemnify White Auctions & Appraisal Service, its affiliates or clients for any damages or losses. Buyer will not hold White Auctions & Appraisal, its owners, its affiliates, its clients or its employees, liable for accidents, injury, theft or incidents related to this purchase.

CATALOG TEXT BELOW:
 
1 - BK Resources CKTST-3554OS - Cocktail Station BK Resources, CKTST-3554OS, Underbar Ice Bin/Cocktail Station with Overshelves, pass-thru unit, 54"W x 35"D x 73"H, overall size, includes: 10-1/2" deep pass-thru ice bin with 10-circuit cold plate, dual service dump sinks with (2) drain openings, (1) fixed shelf with perforated surface for drying & draining, (2) adjustable shelves fit most types of glassware; 18/304 stainless steel construction, stainless steel legs & side bracing, adjustable high impact corrosion resistant feet no drain set included pre-installed legs slightly bowed - can all be jacked back into position - minor dings, most not noticeable

1a - SOFT CLOSE AUCTION DETAILS The auction begins to close on Monday, October 25th at 6 PM CST with 30 seconds between each lot - Approximately 2 lots per minute

1b - PICKUP DATE FOR AUCTION Pickup will start Thursday, October 28th, Friday, October 29th and Saturday, October 30th from 8 AM to 6 PM at the Auction Facility at 1 Fox Run Drive in Altamont, IL Shipping will scheduled through SignUpGenius link

1c - PLEASE MAKE ARRANGEMENTS IF SHIPPING IS NEEDED Please call our office at 618-483-9020 or email us so we know that we will be shipping to you. We will start packing items following the pickup date. Emails to be sent to [email protected]

1d - BK Resources Stainless Restaurant Equipment What we have here is Semi Loads / Over 350 Lots of Stainless Sinks, Wall Shelves, Cabinets, Equipment & Work Tables, Ice Bins and much, much more. You can't go wrong with items from this auctions

2 - BK-LTI-BM-3024 Table Top - Group of (4) Tops BK Resources, BK-LTI-BM-3024 Table Top, rectangular, 30" x 24", reversible, 1" thick, black/mahogany no notable damage - see photo

3 - BK Resources BKHS-W-SS-SS - Hand Wash Sink BK Resources, BKHS-W-SS-SS, Space Saver Hand Sink, wall mount, 9" wide x 9" front-to-back x 5" deep bowl, 4" OC splash mount faucet holes, marine edge, side splashes on left & right, 7-1/2"H backsplash, 304 stainless steel construction, NSF bow to metal right side - totally straightenable

4 - BK Resources BKHS-W-1410-I-SS - Hand Wash Sink BK Resources, BKHS-W-1410-I-SS, Hand Sink, wall mount 14" wide x 10" front-to-back bowl 304 stainless steel Side splashes on left & right 4" O.C. splash mount faucet holes 1-7/8" drain opening small bend back right corner - see photo - straightenable?

5 - BK Resources BKMWS-2030 - Microwave Shelf BK Resources, BKMWS-2030, Microwave Shelf, wall mount, 30"W x 20"D x 16-3/8"H, 16/304 stainless steel, 1-1/2" mounting back lip, 15" angle supports, solid base, NSF bend to top left bracket - see photo - straightenable?

6 - BK Resources BKWSE-1272 - Economy Shelf BK Resources, BKWSE-1272, Economy Shelf, wall-mounted, 72"W x 12"D, 18/430 stainless steel, 1-1/2"H rear up-turn, (3) 8" angle supports, NSF right rear minor bend - straightenable? / roll at x 20" from right on backsplash / right rear minor bend - see photos

7 - BK Resources BKWSE-1684 - Economy Shelf BK Resources, BKWSE-1684, Economy Shelf, wall-mounted, 84"W x 16"D, 18/430 stainless steel, 1-1/2"H rear up-turn, (3) 11-1/2" angle supports, NSF roll in back splash about midpoint - straightenable?

8 - BK Resources BKDCR5-2472 - Cabinet Base Work Table BK Resources, BKDCR5-2472, Cabinet base work table with open front with 5" riser top 24"W x 72"L 14 ga. T304 stainless steel top 18 ga. stainless steel body 6" stainless steel adjustable legs negligible to no damage noted

9 - BK Resources VTT-2424 - Work Table BK Resources, VTT-2424, Work Table, 24"W x 24"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NS slight bend on right side - see photo

10 - BK Resources VETS-3630 - Equipment Stand BK Resources, VETS-3630, Equipment Stand, 37"W x 30"D x 26"H, front rolled edge, 3 sided 2" riser with hemmed edged, 18/430 stainless steel top reinforced with 1-1/2" square tubing, galvanized undershelf & 1-5/8" legs, NSF damage per the x's on photos

11 - BK Resources VTT-1872 - Work Table BK Resources, VTT-1872, Work Table, 72"W x 18"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF damage on back side - see photos for xx markings

12 - BK Resources VTT-3024 - Work Table BK Resources, VTT-3024, Work Table, 30"W x 24"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF damage per the x's on photoss - front right & left

13 - BK Resources VTTR-7230 - Work Table BK Resources, VTTR-7230, Work Table, 72"W x 30"D, 18/430 stainless steel top, with turndown edges front & sides, reinforced with channels, 1-1/2" rear riser, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF right rear damage per x's - see photos

14 - BK Resources BKHS-W-1410 - Hand Sink BK Resources, BKHS-W-1410, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 4" OC splash mount faucet holes, marine edge, 8-1/8" backsplash, 304 stainless steel construction, NSF no notable damage - see photo

15 - BK Resources BKHS-D-1410-SS - Hand Sink BK Resources, BKHS-D-1410-SS, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 4" O.C deck mount faucet holes, marine edge, side splashes on left & right, includes basket drain & wall mounting hardware, 304 stainless steel construction, NSF includes drain damage to right enter - xx per photos

16 - BK Resources BKHS-D-1410-SS - Hand Sink BK Resources, BKHS-D-1410-SS, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 4" O.C deck mount faucet holes, marine edge, side splashes on left & right, includes basket drain & wall mounting hardware, 304 stainless steel construction, NSF includes drain silicone loose on sides - could remove sides or re-silicone

17 - BK Resources BKHS-W-SS-SS - Hand Wash Sink BK Resources, BKHS-W-SS-SS, Space Saver Hand Sink, wall mount, 9" wide x 9" front-to-back x 5" deep bowl, 4" OC splash mount faucet holes, marine edge, side splashes on left & right, 7-1/2"H backsplash, includes basket drain & wall mounting hardware, 304 stainless steel construction, NSF includes drain right side slight silicone separation

18 - BK Resources BKHS-W-1410 - Hand Sink BK Resources, BKHS-W-1410, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 4" OC splash mount faucet holes, marine edge, 8-1/8" backsplash, includes basket drain & wall mounting hardware, 304 stainless steel construction, NSF includes drain damage to bottom of bowl on right side - see photo

19 - BK Resources BKHS-W-1410 - Hand Sink BK Resources, BKHS-W-1410, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 4" OC splash mount faucet holes, marine edge, 8-1/8" backsplash, includes basket drain & wall mounting hardware, 304 stainless steel construction, NSF includes drain slight ripple per x - see photo

20 - BK Resources BK-MIB-2411 - Mobile Ice Bin BK Resources, BK-MIB-2411, Mobile Ice Bin, with sliding lid, 11"W x 24"D x 29"H, stainless steel, 53lb. capacity, removable bottom tray, drain valve in rear of unit, 3" casters with brake minor scuffs - slight rust which is all removable

21 - BK Resources DD12-20161224 - Drop In Sink BK Resources, DDI2-20161224, Drop-In Sink, two compartment, 45-1/4"W x 21"D x 12"H overall size, (2) 20" wide x 16" front-to-back x 12" deep compartments, 4" OC deck mount faucet holes, includes (2) basket drains (BKDR-4), 18/304 stainless steel construction, NSF includes drain damage to front right corner per photo

22 - BK Resources APHS-W1410-2B - Hand Sink BK Resources, APHS-W1410-2B, Antimicrobial Hand Sink, 14" wide x 10" front-to-back x 5" deep bowl, (2) faucet holes, BK Resources, includes basket drain & wall mounting hardware, NSF includes drain no significant damage noted

23 - BK Resources BKHS-W-1410-1 - Hand Sink BK Resources, BK-DIS-1014, Drop-In Sink, one compartment, 12-1/8"W x 18-1/2"D x 9-3/8""H overall size, (1) 10" wide x 14" front-to-back x 9" deep compartment, 4" OC deck mount faucet holes, includes basket drain (BKDR-4), 18/304 stainless steel construction, 11-1/2" x 17-7/8" cutout required includes drain no significant damage noted

24 - BK Resources BK-DIS-1014 - Drop In Sink BK Resources, BKHS-W-1410-1, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, single splash mount faucet hole, marine edge, 8-1/8" backsplash, includes basket drain & wall mounting hardware, 304 stainless steel construction, NSF includes drain damage to left back / left rear corner & right rear corner

25 - BK Resources BKHS-W-1410-SS - Hand Sink BK Resources, BKHS-W-1410-SS, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 4" O.C splash mount faucet holes, marine edge, side splashes on left & right, includes basket drain & wall mounting hardware, 304 stainless steel construction, NSF includes drain very minor suface rust - cleanable

26 - BK Resources VTT-2424 - Work Table BK Resources, VTT-2424, Work Table, 24"W x 24"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF no significant damage noted - some underside rust

27 - BK Resources BK-GT-EXT20 - Grease Trap Extender BK Resources, BK-GT-EXT20, Grease Trap Extender, fits 20 lbs capacity trap (BK-GT-20), 6" extension, does not increase capacity, lid & trap not included no damage noted

28 - BK Resources BKFB-1010-145-16ND - Stainless Contai BK Resources, BKFB-1010-145-16ND, Stainless Containers, 10" x 10" x 14" deep (6) total - (1) with damage per photo - remainder ok / bk resource Pn# may be incorrect

29 - BK Resources BKUBS-1014HSS12 - Underbar Sink BK Resources, BKUBS-1014HSS12, Underbar Sink, 12 inch from left to right, 4" O.C. deck mount faucet holes, Underbar Dump Sink, 12"W x 21-1/4"D x 32-1/2"H, NSF Listed Approved. includes leg set rear backsplash roll / dent - see photos

30 - BK Resources BKUBS-1014HSS12 - Underbar Sink BK Resources, BKUBS-1014HSS12, Underbar Sink, 12 inch from left to right, 4" O.C. deck mount faucet holes, Underbar Dump Sink, 12"W x 21-1/4"D x 32-1/2"H, NSF Listed Approved. includes leg set rear backsplash roll / dent - see photos

31 - BK Resources BKUBS-1014HSS12 - Underbar Sink BK Resources, BKUBS-1014HSS12, Underbar Sink, 12 inch from left to right, 4" O.C. deck mount faucet holes, Underbar Dump Sink, 12"W x 21-1/4"D x 32-1/2"H, NSF Listed Approved. includes leg set rear backsplash roll / dent - see photos

32 - BK Resources VTTR-3630 - Work Table BK Resources, VTTR-3630, Work Table, 36"W x 30"D, 18/430 stainless steel top, with turndown edges on front & sides, reinforced with channels, 1-1/2" rear riser, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF damage to front left per marks - see photos

33 - BK Resources VTT-4830 - Work Table BK Resources, VTT-4830, Work Table, 48"W x 30"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF ding to left side (bend) on top / bottom slight corrosion to galvanized

34 - BK Resources QVT-4836 - Work Table BK Resources, QVT-4836, Work Table, 48"W x 36"D x 34-3/4" H, 14/304 stainless steel top reinforced with (3) 5" C channels, adjustable stainless steel undershelf, 1-5/8" stainless steel legs, adjustable stainless steel feet, NSF missing top leg socket / damage per photos - stainless minor scratches & dings

35 - BK Resources VTT-7230 - Work Table BK Resources, VTT-7230, Work Table, 72"W x 30"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF no notable damage - see photo

36 - BK Resources VTT-7230 - Work Table BK Resources, VTT-7230, Work Table, 72"W x 30"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF very slight damage at marks - see photos

37 - BK Resources VTT-7230 - Work Table BK Resources, VTT-7230, Work Table, 72"W x 30"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF dents per xxx - see photos

38 - BK Resources VTT-9630 - Work Table BK Resources, VTT-9630, Work Table, 96"W x 30"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, (6) 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF minor dents per markings - see photos

39 - BK Resources VTTR-1872 - Work Table BK Resources, VTTR-1872, Work Table, 72"W x 18"D, 18/430 stainless steel top, with turndown edges on front & sides, reinforced with channels, 1-1/2" rear riser, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF ding to right backsplash at tag - dings in bottom shelf - see photos

40 - BK Resources SVTR-7224 - Work Table BK Resources, SVTR-7224, Work Table, 72"W x 24"D, 18/430 stainless steel top, with turndown edges on front & sides, reinforced with channels, 1-1/2" rear riser, adjustable stainless steel undershelf, 1-5/8" dia. stainless steel legs, stainless steel over plastic adjustable bullet feet, NSF dings at xx - backsplash 2' from right - see photos

41 - BK Resources VTT-9630 - Work Table BK Resources, CTT-6030, Work Table, 60"W x 30"D x 34-3/4"H, 16/304 stainless steel top reinforced with (2) 5" C channels, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact, corrosion-resistant feet, NSF ding on front edge per xx - could just turn to wall / straightenable?

42 - BK Resources Misc Shelf Surplus BK Resources, Misc Galvanized shelfs, 22" x 77 1/2" (2) total with set of 34" legs - Make your own shelving minor scuffs & dings

43 - BK Resources 7 Circuit Cold Plate BK Resources, 13" x 19 3/4" (7) Circuit Coldplate see photos - new, unused

44 - BK Resources Misc Shelf Surplus BK Resources, 22" x 41 1/2" Shelving, (1) stainless & (1) Galvanized - 34" galvanized leg set provided - make your own storage shelf see photos for damage - top bowed in about midway on top - straightenbable?

45 - BK Resources Misc Shelf Surplus BK Resources, 22" x 41 1/2" Shelving, (4) Galvanized - 34" galvanized leg set provided - make your own storage shelf see photos for condition

46 - BK Resources Misc Shelf Surplus BK Resources, 26" x 67 1/2" Shelving, (1) stainless & (2) Galvanized - 34" galvanized leg set provided - make your own storage shelf see photos for condition - minor scuffs & dents

47 - BK Resources Misc Shelf Surplus BK Resources, 22" x 29 1/2" Shelving, (1) stainless & (1) Galvanized - 34" galvanized leg set provided - make your own storage shelf see photos for condition - minor scuffs & dents

48 - BK Resources Misc Shelf Surplus BK Resources, 22" x 29 1/2" Shelving, (1) stainless & (1) Galvanized - 34" galvanized leg set provided - make your own storage shelf see photos for condition - minor scuffs & dents

49 - BK Resources Misc Shelf Surplus BK Resources, 22" x 29 1/2" Shelving, (4) Galvanized - 34" galvanized leg set provided - make your own storage shelf see photos for condition - minor scuffs & dents

50 - BK Resources Misc Shelf Surplus BK Resources, 22" x 41 1/2" Shelving, (4) Galvanized - 34" galvanized leg set provided - make your own storage shelf see photos for condition - minor scuffs & dents

51 - BK Resources Misc Shelf Surplus BK Resources, 10" x 41 1/2" Shelving, (1) stainless & (1) Galvanized - 34" galvanized leg set provided - make your own storage shelf see photos for condition - minor scuffs & dents

52 - BK Resources BKUS-1-18-14 - Utility Sink BK Resources, BKUS-1-18-14, Utility Sink, one compartment, 21"W x 21-1/2"D x 41-1/4"H overall size, 18" wide x 18" front-to-back x 14" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, 18/304 stainless steel deck & bowl, NSF includes drain no leg set included damage to marked front roll edge - see photos

53 - BK Resources BKUS-1-18-14 - Utility Sink BK Resources, BKUS-1-18-14, Utility Sink, one compartment, 21"W x 21-1/2"D x 41-1/4"H overall size, 18" wide x 18" front-to-back x 14" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, 18/304 stainless steel deck & bowl, galvanized legs, adjustable high impact corrosion resistant feet, NSF includes drain no leg set included no notable damage - see photo

54 - BK Resources BKUS-1-18-14 - Utility Sink BK Resources, BKUS-1-18-14, Utility Sink, one compartment, 21"W x 21-1/2"D x 41-1/4"H overall size, 18" wide x 18" front-to-back x 14" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, 18/304 stainless steel deck & bowl, galvanized legs, adjustable high impact corrosion resistant feet, NSF includes drain no leg set included no notable damage - see photo

55 - BK Resources BKUS-1-18-14 - Utility Sink BK Resources, BKUS-1-18-14, Utility Sink, one compartment, 21"W x 21-1/2"D x 41-1/4"H overall size, 18" wide x 18" front-to-back x 14" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, 18/304 stainless steel deck & bowl, galvanized legs, adjustable high impact corrosion resistant feet, NSF includes drain no leg set included backsplash is rolled forward - see photos

56 - BK Resources BKS-2-1620-12-18L -2 Compartment Sink BK Resources, BKS-2-1620-12-18L, Sink, two compartment, 52-1/2"W x 25-13/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 12" deep compartments, 18" drainboard on left, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel construction, NSF no drain set included no leg set included minor bend on left & right roll edge / front edge all per photos - bowls ok

57 - Turbo Air TSA-3-N - 3 Compartment Sink Turbo Air, TSA-3-N, Prep Sink, 3-compartment, 18" wide x 18" front-to-back, 11" deep bowl, 11"H backsplash, 18/304 stainless steel bowls, galvanized gussets & tubular legs with adjustable ABS feet, NSF no drain set included no leg set included left & right side roll edge damage per photos

58 - BK Resources BKUBS-348S - Underbar Sink BK Resources, BKUBS-348RS, Underbar Sink, 48 inch from left to right, 48"W x 21-1/4"D x 32-1/2"H, 13-5/8" stamped drainboard on the right side, Three compartment with right drainboard, NSF Listed Approved no drain set included no leg set included right end mars - per marks / see photos

59 - BK Resources BKUS-1-18-14 - Utility Sink BK Resources, BKUS-1-18-14, Utility Sink, one compartment, 21"W x 21-1/2"D x 41-1/4"H overall size, 18" wide x 18" front-to-back x 14" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, 18/304 stainless steel deck & bowl, NSF includes drain no leg set included dent in left roll & scratch/dent left bowl per photos

60 - BK Resources BK8BS-1-1821-14 - Budget Sink BK Resources, BK8BS-1-1821-14, Budget Sink, one compartment, 21"W x 24-1/2"D x 41"H overall size, 18" wide x 21" front-to-back x 14" deep compartment, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, includes basket drains (BKDR-4), 18/430 stainless steel construction, galvanized steel legs with adjustable high-impact corrosion-resistant feet includes drain includes leg set dent in front roll/inward kink - see photos

61 - BK Resources BK8BS-1-1821-14 - Budget Sink BK Resources, BK8BS-1-1821-14, Budget Sink, one compartment, 21"W x 24-1/2"D x 41"H overall size, 18" wide x 21" front-to-back x 14" deep compartment, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, includes basket drains (BKDR-4), 18/430 stainless steel construction, galvanized steel legs with adjustable high-impact corrosion-resistant feet includes drain no faucets included - includes leg set rear leg mount needs refastened / silicone - bracket is with unit - see photos

62 - BK Resources BKS-1-20-12 - 1 Compartment Sink BK Resources, BKS-1-20-12, Sink, one compartment, 25"W x 25-13/16"D x 43-3/4"H overall size, 20" wide x 20" front-to-back x 12" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel deck & bowl, NSF no drain set included no leg set included left rear roll scrapes & front roll scrape - see photos

63 - BK Resources BKS-2-1620-12-18R -2 Compartment Sink BK Resources, BKS-2-1620-12-18R, Sink, two compartment, 52-1/2"W x 25-13/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 12" deep compartments, 18" drainboard on left, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel construction, NSF no drain set included no leg set included right roll edge & right corner backsplash damage -see photos

64 - BK Resources BKS-2-1620-12 - 2 Compartment Sink BK Resources, BKS-2-1620-12, Sink, two compartment, 37"W x 25-13/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 12" deep compartments, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, NSF includes drain no leg set included no notable damage - see photo

65 - BK Resources BKS-1-18-12-18R - 1 Compartment Sink BK Resources, BKS-1-18-12-18R, Sink, one compartment, 38-1/2"W x 23-13/16"D x 43-3/4"H overall size, 18" wide x 18" front-to-back x 12" deep compartment, 18" drainboard on right, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel construction, NSF no drain set included no leg set included significant backsplash damge - front roll dent - see photos

66 - BK Resource BKS-3-1620-12-18L -3 Compartment Sink BK Resources, BKS-3-1620-12-18L, Sink, three compartment, 68-1/2"W x 25-13/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 12" deep compartments, 18" drainboard on left, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel construction, NSF no drain set included no leg set included damage to left & front roll edge - see phots / backsplash damage on right side - see photos

67 - BK Resources BKMS-1620-6 - Mop Sink BK Resources, BKMS-1620-6, Mop Sink, floor mount, 24-1/2"W x 19-3/8"D x 11"H overall size, 20" wide x 16" front-to-back x 6" deep bowl, 3-1/2" heavy duty brass basket drain (BKDR-HD4), (3) skirted sides, 18/304 stainless steel no drain set included left & right backsplash rolls - easily straightened - see photos

68 - BK Resources BKS-2-18-12 - 2 Compartment Sink BK Resources, BKS-2-18-12, Sink, two compartment, 41"W x 23-13/16"D x 43-3/4"H overall size, 18" wide x 18" front-to-back x 12" deep compartments, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, NSF includes drain no leg set included back slight roll on left side / right side backsplash dent - see photos

69 - BK Resources BKS-2-18-12-18R - 2 Compartment Sink BK Resources, BKS-2-18-12-18R, Sink, two compartment, 56-1/2"W x 23-13/16"D x 43-3/4"H overall size, 18" wide x 18" front-to-back x 12" deep compartments, 18" drainboard on right, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF no drain set included no leg set included right rear backsplash damage / front roll damage - all minor - see photos

70 - BK Resources BKS-3-1014-10 -Convenience Store Sink BK Resources, BKS-3-1014-10, Convenience Store Sink, three compartment, 35-1/2"W x 19-13/16"D x 39-3/4"H overall size, 10" wide x 14" front-to-back x 10" deep compartments, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel deck & bowl, NSF no drain set included no faucet set included no leg set included right rear backsplash per photo

71 - BK Resources DDI3-10141024 - Drop In Sink BK Resources, DDI3-10141024, Drop-In Sink, three compartment, 35-3/4"W x 18-1/2"D x 10"H overall size, (3) 10" wide x 14" front-to-back x 10" deep compartments, (1) set of 4" OC deck mount faucet holes,18/304 stainless steel construction, NSF no drain set included damage to front right corner per photo - straightenable ?

72 - BK Resources BKS-3-1620-12-18R -3 Compartment Sink BK Resources, BKS-3-1620-12-18R, Sink, three compartment, 68-1/2"W x 25-13/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 12" deep compartments, 18" drainboard on right, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel construction, NSF no drain set included no leg set included minor ding to left & right roll edge - backsplash damage all per photos

73 - BK Resources BKS-3-1014-10 -Convenience Store Sink BK Resources, BKS-3-1014-10, Convenience Store Sink, three compartment, 35-1/2"W x 19-13/16"D x 39-3/4"H overall size, 10" wide x 14" front-to-back x 10" deep compartments, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel deck & bowl, galvanized steel legs, NSF no faucet set included - no drain set included no leg set included no notable damage - see photo

74 - BK Resources BKUBDMX-18-18S - Mixing Station BK Resources, BKUBDMX-18-18S, Mixing Station, 18"W x 18"D x 32-1/2"H, 18/304 stainless steel stamped drainboard with Add-on Blender Station shelf no leg set included no notable damage - see photo

75 - BK Resources DDI2-20161224 - 2 Comp Drop In Sink BK Resources, DDI2-20161224, Drop-In Sink, two compartment, 45-1/4"W x 21"D x 12"H overall size, (2) 20" wide x 16" front-to-back x 12" deep compartments, 18/304 stainless steel construction, lead free, NSF no drain set included slight damage to corners - see photos for detail

76 - BK Resources BK-GT-30 - Grease Trap BK Resources, BK-GT-30, Grease Trap, 30 lbs. grease capacity, 15 gallons per minute, non-skid deck plate, removable baffles, no hub connections, includes T-Vent, main body suspended above floor, 11 gauge carbon steel construction with corrosion resistant coating will need lid fastener made

77 - BK Resources BKS-1-1824-14-24T -1 Compartment Sink BK Resources, BKS-1-1824-14-24T Sink 1-compartment 66W x 29-1316D x 43-34H 18304 stainless steel construction 18 side-to-side x 24 front-to-back x 14 deep compartment 24 drainboards on left right 9H backsplash 8 O.C. splash mount faucet holes 1-12 rolled edges front sides NSF no drain set included no leg set included left rear & right rear corner roll minor ding - some scuffs & scratches - see photos

78 - BK Resources BKS-2-24-14 - 2 Compartment Sink BK Resources, BKS-2-24-14, Sink, two compartment, 53"W x 29-13/16"D x 43-3/4"H overall size, 24" wide x 24" front-to-back x 14" deep compartments, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF right side drain area bent down slightly - right / left backsplash roll per photos

79 - BK Resource BKSDT-3-20-12-20LS -3 Compartment Sink BK Resources, BKSDT-3-20-12-20LS, Soiled Dishtable, & Three-Compartment Sink, 100"W x 30-1/2"D x 44"H overall size, left-to-right operation, (3) 20" wide x 20" front-to-back x 12" deep compartments, 10"H backsplash, 8" OC splash mount faucet holes, includes: (3) BKDR-4 basket drains, (2) BK-SDTS tray guides & (1) BK-PRB-5 pre-rinse basket, 18/304 stainless steel top, 1-5/8" rolled edges on front & sides, stainless steel legs & side bracing, stainless steel over plastic adjustable bullet feet, NSF damage to front roll in front of left sink - see photos

80 - BK Resources BKS-3-1824-14-18T -3 Compartment Sink BK Resources, BKS-3-1824-14-18T, Sink, three compartment, 90"W x 29-13/16"D x 43-3/4"H overall size, 18" wide x 24" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF right sink bowl top has slight dent - otherwise great shape ! See photos

81 - BK Resources BKS-3-1824-14-18T -3 Compartment Sink BK Resources, BKS-3-1824-14-18T, Sink, three compartment, 90"W x 29-13/16"D x 43-3/4"H overall size, 18" wide x 24" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF right drain pan bent down slightly - right rear backsplash damage - see photos

82 - BK Resources BKS-3-1014-10-15T -3 Compartment Sink BK Resources, BKS-3-1014-10-15T, Convenience Store Sink, three compartment, 60"W x 19-13/16"D x 39-3/4"H overall size, 10" wide x 14" front-to-back x 10" deep compartments, (2) left & right 15" drainboards, 9"H backsplash, 8" O.C. splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel deck & bowl, NSF no drain set included no leg set included - no faucet set included no damage noted - just saw a scuff or two - see photos

83 - BK Resources BKS-3-15-14-15T - 3 Compartment Sink BK Resources, BKS-3-15-14-15T, Sink, three compartment, 75"W x 20-13/16"D x 43-3/4"H overall size, 15" wide x 15" front-to-back x 14" deep compartments, (2) left & right 15" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel construction, NSF no drain set included no leg set included backsplash has center bow - center sink full of dents - right rear roll slight raised area - straightenable

84 - BK Resources BKS-3-1620-14-18T -3 Compartment Sink BK Resources, BKS-3-1620-14-18T, Sink, three compartment, 84"W x 25-13/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF no drain set included no leg set included small dents in center & right sinks per photo - left backsplash damage per photo

85 - BK Resources BKS-3-1824-14-18T -3 Compartment Sink BK Resources, BKS-3-1824-14-18T, Sink, three compartment, 90"W x 29-13/16"D x 43-3/4"H overall size, 18" wide x 24" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF no drain set included no leg set included left backsplash rolled - straightenable? / right side backsplash top corner damage per photo

86 - BK Resources BKS-3-2030-12-20T -3 Compartment Sink BK Resources, BKS-3-2030-12-20T, Sink, three compartment, 100"W x 35-13/16"D x 43-3/4"H overall size, 20" wide x 30" front-to-back x 12" deep compartments, (2) left & right 20" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF left sink several creases/dents etc / right backsplash damage - Left side roll damage - see photos

87 - BK Resources BKS-3-1620-12-18R -3 Compartment Sink BK Resources, BKS-3-1620-12-18R, Sink, three compartment, 68-1/2"W x 25-13/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 12" deep compartments, 18" drainboard on right, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel construction, NSF no drain set included no leg set included right drain pan bent down - see photos for more detail

88 - BK Resources BKS-3-15-14-15T - 3 Compartment Sink BK Resources, BKS-3-15-14-15T, Sink, three compartment, 75"W x 20-13/16"D x 43-3/4"H overall size, 15" wide x 15" front-to-back x 14" deep compartments, (2) left & right 15" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, NSF no leg set included right side drain area bowed - rolled edge damage - backsplash left side damage all per photo

89 - BK Resources BKS-3-1220-12-12T - Convenience Store BK Resources, BKS-3-1220-12-12T, Convenience Store Sink, three compartment, 60"W x 25-13/16"D x 39-3/4"H overall size, 12" wide x 20" front-to-back x 12" deep compartments, (2) left & right 12" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains, 18/304 stainless steel deck & bowl, NSF no leg set included- no faucet included - right side sink bowl damage - see photos

90 - BK Resources ES-3-18-12-18T - Economy 3 Comp Sink BK Resources, ES-3-18-12-18T, Economy Sink, three compartment, 90"W x 23-13/16"D x 43-3/4"H overall size, 18" wide x 18" front-to-back x 12" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, 1-1/2" rounded front & side edges, 8" OC splash mount faucet holes, drains included, 18 gauge stainless steel deck & bowls, NSF no leg set included right side sink bowl dings - see photos

91 - BK Resources BKS-3-1620-12-18L -3 Compartment Sink BK Resources, BKS-3-1620-12-18L, Sink, three compartment, 68-1/2"W x 25-13/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 12" deep compartments, 18" drainboard on left, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel construction, NSF no drain set included no leg set included damage to front roll in front of left sink - damage to right side backspash per photo

92 - BK Resources BKS-3-24-14-24T - 3 Compartment Sink BK Resources, BKS-3-24-14-24T, Sink, three compartment, 120"W x 29-13/16"D x 43-3/4"H overall size, 24" wide x 24" front-to-back x 14" deep compartments, (2) left & right 24" drainboards, 9"H backsplash, (2) sets of 8" OC splash mount faucet holes, 1-1/2" rolled front & side edges, 18/304 stainless steel construction, NSF no drain set included no leg set included damage to front right roll / damage to rights side backsplash all per photos

93 - BK Resources CSTR5-2460S - Chef Table Cabinet Base BK Resources, CSTR5-2460S, Chef Table, cabinet base, 60"W x 24"D x 39-3/4"H overall size, 14/304 stainless steel top with 5" back riser, 18/304 stainless steel body, 6" stainless steel legs with 1" height adjustment, stainless steel feet, NSF no doors or shelves - rear wall removable - no other notable damage - scuffs only - see photos

94 - BK Resources BKS-3-1014-10 -Convenience Store Sink BK Resources, BKS-3-1014-10, Convenience Store Sink, three compartment, 35-1/2"W x 19-13/16"D x 39-3/4"H overall size, 10" wide x 14" front-to-back x 10" deep compartments, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel deck & bowl, NSF no drain set included no faucet set included no leg set included rear backsplash rolled per photo - front right roll damage - dings/rolls to right sink - see photos

95 - BK Resources BKS-3-20-12-18T - 3 Compartment Sink BK Resources, BKS-3-20-12-18T, Sink, three compartment, 96"W x 25-13/16"D x 43-3/4"H overall size, 20" wide x 20" front-to-back x 12" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel construction, NSF no drain set included no leg set included no notable damage - see photo / scuffs only

96 - BK Resource BKS-3-1620-14-18TS -3 Compartment Sink BK Resources, BKS6-3-1620-14-18TS, Sink, three compartment, 87-1/4"W x 25-1/2"D x 44-1/16"H overall size, 16" wide x 20" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 10"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, includes basket drains, 16/304 stainless steel deck & bowls, stainless steel legs & side bracing, adjustable stainless steel over plastic bullet feet, NSF no drain set included no leg set included no notable damage - see photo / scuffs only

97 - BK Resources BKS-3-15-14-15R - 3 Compartment Sink BK Resources, BKS-3-15-14-15R, Sink, three compartment, 62-1/2"W x 20-13/16"D x 43-3/4"H overall size, 15" wide x 15" front-to-back x 14" deep compartments, 15" drainboard on right, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel construction, NSF no drain set included no leg set included dent to front left sink - no other noted damage - see photos

98 - BK Resource MSHSA-96W2 -Four Station Handwash Sink BK Resources, MSHSA-96W2, ADA Four Station Handwash Sink, wall mount, (4) sets of 8" OC splash mount faucet holes, 96"W x 16-1/4" front-to-back x 5" deep bowl, 4/304 stainless steel sink, NSF, ADA Compliant (custom faucet hole configurations available) (3-5 day lead time) no drain set included damage to front roll - approx 40" from left / damage to backsplash same area / see photos

99 - BK Resources BKS-3-24-14-24T - 3 Compartment Sink BK Resources, BKS-3-24-14-24T, Sink, three compartment, 120"W x 29-13/16"D x 43-3/4"H overall size, 24" wide x 24" front-to-back x 14" deep compartments, (2) left & right 24" drainboards, 9"H backsplash, (2) sets of 8" OC splash mount faucet holes, 1-1/2" rolled front & side edges, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF small dent to back of center sink / minor ding to left backspash corner/roll - see photos

100 - BK Resources BKS6-2-24-14-24LS -2 Compartment Sink BK Resources, BKS6-2-24-14-24LS, Sink, two compartment, 76-3/16"W x 29-1/2"D x 44-1/16"H overall size, 24" wide x 24" front-to-back x 14" deep compartments, 24" drainboard on left, 10"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, includes basket drains, 16/304 stainless steel deck & bowls, stainless steel legs & side bracing, adjustable stainless steel over plastic bullet feet, NSF no leg set included no notable damage - see photo / scuffs only

101 - BK Resources BKS-3-18-14-18T - 3 Compartment Sink BK Resources, BKS-3-18-14-18T, Sink, three compartment, 90"W x 23-13/16"D x 43-3/4"H overall size, 18" wide x 18" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, NSF no leg set included slight roll to right side backsplash - straightenable? / no other significant damage - see photos

102 - BK Resources BK8BS-3-1221-12 - 3 Comp Budget Sink BK Resources, BK8BS-3-1221-12, Budget Sink, three compartment, 39"W x 24-1/2"D x 41"H overall size, 12" wide x 21" front-to-back x 12" deep compartments, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, includes basket drains (BKDR-4), 18/430 stainless steel construction, NSF no leg set included - no faucets included - damage to upper left corner / left sink - see photos

103 - BK Resources BKS6-3-1620-14S - 3 Compartment Sink BK Resources, BKS6-3-1620-14S, Sink, three compartment, 53-1/8"W x 25-1/2"D x 44-1/16"H overall size, 16" wide x 20" front-to-back x 14" deep compartments, 10"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, includes basket drains, 16/304 stainless steel deck & bowls, NSF no leg set included small bends on right backsplash - see photos

104 - BK Resources BK8BS-3-1821-12 - 3 Comp Budget Sink BK Resources, BK8BS-3-1821-12, Budget Sink, three compartment, 57"W x 24-1/2"D x 41"H overall size, 18" wide x 21" front-to-back x 12" deep compartments, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, includes basket drains (BKDR-4), 18/430 stainless steel construction, galvanized steel legs with adjustable high-impact corrosion-resistant feet - no faucets included - sink divider between left & center sink bent - front left leg mount missing - see photos

105 - BK Resources BKS-2-24-14-24L - 2 Compartment Sink BK Resources, BKS-2-24-14-24L, Sink, two compartment, 74-1/2"W x 29-13/16"D x 43-3/4"H overall size, 24" wide x 24" front-to-back x 14" deep compartments, 24" drainboard on left, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel construction, NSF no drain set included no leg set included right side roll edge damage / slight bend in middle of backsplash - see photos for concition

106 - BK Resources BKS6-2-24-14-24TS -2 Compartment Sink BK Resources, BKS6-2-24-14-24TS, Sink, two compartment, 99-1/4"W x 29-1/2"D x 44-1/16"H overall size, 24" wide x 24" front-to-back x 14" deep compartments, (2) left & right 24" drainboards, 10"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, includes basket drains, 16/304 stainless steel deck & bowls, stainless steel legs & end bracing, adjustable stainless steel over plastic bullet feet, NSF no notable damage - see photo / scuffs only

107 - BK Resources BKS-3-2030-12-20T -3 Compartment Sink BK Resources, BKS-3-2030-12-20T, Sink, three compartment, 100"W x 35-13/16"D x 43-3/4"H overall size, 20" wide x 30" front-to-back x 12" deep compartments, (2) left & right 20" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF no notable damage - see photo / scuffs only

108 - BK Resources BKS-3-2030-12-20T -3 Compartment Sink BK Resources, BKS-3-2030-12-20T, Sink, three compartment, 100"W x 35-13/16"D x 43-3/4"H overall size, 20" wide x 30" front-to-back x 12" deep compartments, (2) left & right 20" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF left side backsplash roll/dent per photo - right side backsplash end damage per photo

109 - BK Resources BKS6-2-24-14-24TS -2 Compartment Sink BK Resources, BKS6-2-24-14-24TS, Sink, two compartment, 99-1/4"W x 29-1/2"D x 44-1/16"H overall size, 24" wide x 24" front-to-back x 14" deep compartments, (2) left & right 24" drainboards, 10"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, includes basket drains, 16/304 stainless steel deck & bowls, stainless steel legs & end bracing, adjustable stainless steel over plastic bullet feet, NSF no notable damage - see photo / scuffs only

110 - BK Resource BKCS-3-18-14-18T -3 Comp Corner Sink BK Resources, BKCS-3-18-14-18T, Corner Sink, three compartment, 57"W x 57"D x 43-1/2"H overall size, 18 wide" x 18" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, (2) sets of 8" OC faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel construction, NSF no drain set included no leg set included right side flange damage / backsplash above right sink / left side roll damage - corner backsplash - see photos for detail

111 - BK Resources BKS-2-20-12-18T - 2 Compartment Sink BK Resources, BKS-2-20-12-18T, Sink, two compartment, 76"W x 25-13/16"D x 43-3/4"H overall size, 20" wide x 20" front-to-back x 12" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF no drain set included no leg set included small dent on backsplash above left sink / left roll edge damage / left backsplash all per photos

112 - BK Resource BKDCR5-2436 - Cabinent Base Work Table BK Resources, BKDCR5-2436 24" X 36" Cabinet Base Work Table With 5" Riser 14 GA - Open Front - 24" x 36" Long - 34 3/4" High - 5" Riser - 14 ga T304 stainless steel top - 18 ga stainless steel body - 6" stainless steel adjustable legs - no doors included - no notable damage - see photo / scuffs only - no doors or shelving

113 - BK Resources BKS-2-18-12-18R - 2 Compartment Sink BK Resources, BKS-2-18-12-18R, Sink, two compartment, 56-1/2"W x 23-13/16"D x 43-3/4"H overall size, 18" wide x 18" front-to-back x 12" deep compartments, 18" drainboard on right, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF no drain set included no leg set included Dents back of left sink - backsplash twisted slightly - straightenable ? See photos for detail

114 - BK Resources BKS6-2-1620-14-18TS - 2 Comp Sink BK Resources, BKS6-2-1620-14-18TS, Sink, two compartment, 71-1/4"W x 25-1/2"D x 44-1/16"H overall size, 16" wide x 20" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 10"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, includes basket drains, 16/304 stainless steel deck & bowls, stainless steel legs & end bracing, adjustable stainless steel over plastic bullet feet, NSF right drain surface pulled from right sink - see photos for actual detail

115 - BK Resources MSHS96 - 4 Station Handwash Sink BK Resources, MSHS96, Four Station Handwash Sink, wall mounted, (4) sets of 8" OC splash mount faucet holes, 96"W x 19-7/8" front-to-back x 8" deep bowl, 14/304 stainless steel sink, basket drain, 18 gauge stainless steel legs & supports, NSF (3-5 day lead time) no drain set included no notable damage - see photo / scuffs only

116 - BK Resources BKS-3-10140-10-15T -Convenience Store BK Resources, BKS-3-1014-10-15T, Convenience Store Sink, three compartment, 60"W x 19-13/16"D x 39-3/4"H overall size, 10" wide x 14" front-to-back x 10" deep compartments, (2) left & right 15" drainboards, 9"H backsplash, 8" O.C. splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel deck & bowl, NSF no drain set included no faucet set included no leg set included slight bend to left backsplash - right side sink dent per photos

117 - BK Resources BKS-4-1620-14-18T -4 Compartment Sink BK Resources, BKS-4-1620-14-18T, Sink, four compartment, 100"W x 25-3/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, (2) sets of 8" OC splash mount faucet holes, 1-1/2" rolled front & side edges, includes basket drains, 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF minor scuffs only - no notable damage - see photos for detail

118 - BK Resources BKS-4-1620-14-18T -4 Compartment Sink BK Resources, BKS-4-1620-14-18T, Sink, four compartment, 100"W x 25-3/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, (2) sets of 8" OC splash mount faucet holes, 1-1/2" rolled front & side edges, includes basket drains, 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF minor scuffs only - no notable damage - see photos for detail

119 - BK Resources BKS-4-1620-14-18T -4 Compartment Sink BK Resources, BKS-4-1620-14-18T, Sink, four compartment, 100"W x 25-3/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, (2) sets of 8" OC splash mount faucet holes, 1-1/2" rolled front & side edges, includes basket drains, 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF minor scuffs only - no notable damage - see photos for detail

120 - BK Resources BKS-4-1620-14-18T -4 Compartment Sink BK Resources, BKS-4-1620-14-18T, Sink, four compartment, 100"W x 25-3/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, (2) sets of 8" OC splash mount faucet holes, 1-1/2" rolled front & side edges, includes basket drains, 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF minor scuffs only - no notable damage - see photos for detail

121 - BK Resources SVTR5-6030 - Work Table BK Resources, SVTR5-6030, Work Table, 60"W x 30"D, 18/430 stainless steel top, with turndown edges on front & sides, reinforced with channels, 5" backsplash, adjustable stainless steel undershelf, 1-5/8" dia. stainless steel legs, stainless steel bullet feet, NSF right top - bow and damage per photos

122 - BK Resources BKPT-3072S-R - Stainless Prep Table BK Resources, BKPT-3072S-R Stainless Steel Prep Table - ÿ73.00 in. L x 32.00 in. D x 17.00 in. H - 18/304 stainless steel construction - includes basket drain - 16" wide x 20" front-to-back x 10" dep sink bowl on left - adjustable stainless steel undershelf with cast aluminum corners - stainless steel legs with stainless steel adjustable bullet feet - NSF right corner of backsplash damage per photos

123 - BK Resources BKPT-3072S-R - Stainless Prep Table BK Resources, BKPT-3072S-R Stainless Steel Prep Table - ÿ73.00 in. L x 32.00 in. D x 17.00 in. H - 18/304 stainless steel construction - includes basket drain - 16" wide x 20" front-to-back x 10" dep sink bowl on left - adjustable stainless steel undershelf with cast aluminum corners - stainless steel legs with stainless steel adjustable bullet feet - NSF right and left edge of backsplash damaged - see photo for details

124 - BK Resources BKS-3-1824-14-18T -3 Compartment Sink BK Resources, BKS-3-1824-14-18T, Sink, three compartment, 90"W x 29-13/16"D x 43-3/4"H overall size, 18" wide x 24" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF left side rear roll edge dent per photo

125 - BK Resources BKS-3-1824-14-18T -3 Compartment Sink BK Resources, BKS-3-1824-14-18T, Sink, three compartment, 90"W x 29-13/16"D x 43-3/4"H overall size, 18" wide x 24" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, NSF no leg set included no notable damage - see photo / scuffs only

126 - BK Resources BK-ADR-6020-12 - Dunnage Rack BK Resources, BK-ADR-6020-12 - Dunnage Rack, 1-tier, 60"W x 20"D x 12"H, 1500 lbs. capacity, 1-1/2" square 6063-T5 aluminum alloy tubing, NSF no notable damage - see photo / scuffs only

127 - BK Resources BK-WPR2-72 - Wall Mount Pot Rack BK Resources, BK-WPR2-72, Pot Rack, wall mount, double bar, 72"W x 12"D, 304 stainless steel, 2" flat bar, 12"D top bar, 6"D bottom bar, (12) stainless steel double prong hooks (BKSSDPH) will be needed to complete this rack (not furnished), NSF no notable damage - will need the pan hooks available online

128 - BK Resources BK-ADR-6024-8 - Dunnage Rack BK Resources, BK-ADR-6024-8, Dunnage Rack; 1-tier; 60"W x 24"D xÿ8"H; 16 gauge all welded aluminum construction,; 1-1/2" square 6063-T5 Alloy tubing; 1,500 lb. capacity no notable damage - see photo / scuffs only

129 - BK Resources BK-ADR-6024-8 - Dunnage Rack BK Resources, BK-ADR-6024-8, Dunnage Rack; 1-tier; 60"W x 24"D xÿ8"H; 16 gauge all welded aluminum construction,; 1-1/2" square 6063-T5 Alloy tubing; 1,500 lb. capacity no notable damage - see photo / scuffs only

130 - BK Resources BKC-2133S-2H - Utility Cart BK Resources, BKC-2133S-2H, Utility Cart, 2-tier, 38-3/8"L x 21"W x 37-1/8"H, 33"L x 21"W shelf, heavy duty grade, hemmed edge on 3 sides, 18 ga. stainless steel, all welded construction, (2) 3-1/2" swivel; (2) fixed casters, 700 lbs weight capacity, bumpers, NSF needs a few fasteners / straightened - everything there - so photos for detail

131 - BK Resources BK-MIB-2411 - Mobile Ice Bin BK Resources, BK-MIB-2411, Mobile Ice Bin, with sliding lid, 11"W x 24"D x 29"H, stainless steel, 53lb. capacity, removable bottom tray, drain valve in rear of unit, 3" casters with brake minor rust - change out the screws and ready to go! - see photos for condition

132 - BK Resources BKC-1827S-3S - Utility Cart BK Resources, BKC-1827S-3S, Utility Cart, 3-tier, 30-3/4"L x 18"W x 33"H, 27"L x 18"W shelf, standard grade, 20 ga. stainless steel, all welded construction, (4) 3-1/2" swivel casters, 300 lbs weight capacity, NSF needs disassemble & straightened - should be good to go then - photos for condiion

133 - BK Resources BKS-3-24-14-24T - 3 Compartment Sink BK Resources, BKS-3-24-14-24T, Sink, three compartment, 120"W x 29-13/16"D x 43-3/4"H overall size, 24" wide x 24" front-to-back x 14" deep compartments, (2) left & right 24" drainboards, 9"H backsplash, (2) sets of 8" OC splash mount faucet holes, 1-1/2" rolled front & side edges, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF backsplash slight lean per photo - front roll middle sink area - see photos

134 - BK Resources BKS-3-24-14-24T - 3 Compartment Sink BK Resources, BKS-3-24-14-24T, Sink, three compartment, 120"W x 29-13/16"D x 43-3/4"H overall size, 24" wide x 24" front-to-back x 14" deep compartments, (2) left & right 24" drainboards, 9"H backsplash, (2) sets of 8" OC splash mount faucet holes, 1-1/2" rolled front & side edges, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF front left leg mount needs refastened - front roll middle sink area - backsplash & left roll

135 - BK Resources BKS-3-24-14-24T - 3 Compartment Sink BK Resources, BKS-3-24-14-24T, Sink, three compartment, 120"W x 29-13/16"D x 43-3/4"H overall size, 24" wide x 24" front-to-back x 14" deep compartments, (2) left & right 24" drainboards, 9"H backsplash, (2) sets of 8" OC splash mount faucet holes, 1-1/2" rolled front & side edges, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF right & left roll damage at marks - left sink above on backsplash - see photos for full detial

136 - BK Resources BKS-3-24-14-24T - 3 Compartment Sink BK Resources, BKS-3-24-14-24T, Sink, three compartment, 120"W x 29-13/16"D x 43-3/4"H overall size, 24" wide x 24" front-to-back x 14" deep compartments, (2) left & right 24" drainboards, 9"H backsplash, (2) sets of 8" OC splash mount faucet holes, 1-1/2" rolled front & side edges, includes basket drains (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF left side drainer flat leaning some - backsplash on left side - see photos

137 - BK Resources BKCS-3-18-14-18T - 3 Comp Corner Sink BK Resources, BKCS-3-18-14-18T, Corner Sink, three compartment, 57"W x 57"D x 43-1/2"H overall size, 18 wide" x 18" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, (2) sets of 8" OC faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel construction, no legs included, no faucets included no drains included, NSF left sink bowl with dent / backsplash per photos

138 - BK Resources BKCS-3-18-14-18T - 3 Comp Corner Sink BK Resources, BKCS-3-18-14-18T, Corner Sink, three compartment, 57"W x 57"D x 43-1/2"H overall size, 18 wide" x 18" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, (2) sets of 8" OC faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel construction, no legs included, no faucets included no drains included, NSF left roll & corner damage - right roll & backsplash damage per marks - backsplash midway - see photos

139 - BK Resources BKCS-3-18-14-18T - 3 Comp Corner Sink BK Resources, BKCS-3-18-14-18T, Corner Sink, three compartment, 57"W x 57"D x 43-1/2"H overall size, 18 wide" x 18" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, (2) sets of 8" OC faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel construction, no legs included, no faucets included no drains included, NSF - front left roll ding - other minor scratches - see photos

140 - BK Resources BKUS-1-24-14 - Utility Sink BK Resources, BKUS-1-24-14, Utility Sink, one compartment, 27"W x 27-1/2"D x 41-1/4"H overall size, 24" wide x 24" front-to-back x 14" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, 18/304 stainless steel deck & bowl, NSF back twisted - straightenable ? - see photos for detail

141 - BK Resources BKUS-1-24-14 - Utility Sink BK Resources, BKUS-1-24-14, Utility Sink, one compartment, 27"W x 27-1/2"D x 41-1/4"H overall size, 24" wide x 24" front-to-back x 14" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, 18/304 stainless steel deck & bowl, NSF backsplash left corner damage - see photos for detail

142 - BK Resources BKUS-LD36-21S - Underbar Liquor Disp BK Resources, BKUB-LD36-21S, Underbar Liquor Bottle Display Unit, 36?W X 21-1/4?D x 32-1/2?H, (4) steps with guard rail, approximately (40) bottle capacity, 18/304 stainless steel construction, NSF no leg set included little twist to r side stainless - see photos

143 - BK Resources BKSDT-72-R - Soiled Dishtable BK Resources, BKSDT-72-R, Soiled Dishtable, straight design, 72"W x 30-7/8"D x 46-1/4"H, right-to-left operation, 18/304 stainless steel top, 10"H backsplash, 20" x 20" x 8" deep pre-rinse sink, 8" O.C. splash mount faucet holes, rack guide (BK-SDTS), raised rolled edges on front & sides - NSF no leg set included may not follow the pictural description of manufacturer due to production change

144 - BK Resources BKUS-1-24-14 - Utility Sink BK Resources, BKUS-1-24-14, Utility Sink, one compartment, 27"W x 27-1/2"D x 41-1/4"H overall size, 24" wide x 24" front-to-back x 14" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, 18/304 stainless steel deck & bowl, NSF no drain set included no leg set included backsplash bent over - front roll edge damage per photo

145 - BK Resource BKS-1-1620-12-18T -1 Compartment Sink BK Resources, BKS-1-1620-12-18T, Sink, one compartment, 52"W x 25-13/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 12" deep compartment, (2) left & right 18" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel construction, NSF no drain set included no leg set included right side damage per photo

146 - BK Resources UB4-21-LD18 - Underbar Liquor Display BK Resources, UB4-21-LD18, Underbar Liquor Bottle Display Unit, 18"W X 21-1/4"D x 32-1/2"H, (4) steps with guard rail, approximately (20) bottle capacity, 18/304 stainless steel construction, NSF no leg set included bend on front lower crosspiece and slight bend to right side

147 - BK Resources JB-SO20181114 - Stainless Top John Boos, 124" x 42" .075 custom stainless top - one of a kind no leg set included damage to left roll

148 - BK Resources BKHS-W-1410-LS - Hand Sink BK Resources, BKHS-W-1410-LS-P-G, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, marine edge, side splash on left, 304 stainless steel construction, NSF no significant damage noted - see photos

149 - BK Resources BKHS-D-1410-SS - Hand Sink BK Resources, BKHS-D-1410-SS, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 4" O.C deck mount faucet holes, marine edge, side splashes on left & right, 304 stainless steel construction, NSF no drain set included no significant damage noted - see photos

150 - BK Resources BKHS-D-1410-SS - Hand Sink BK Resources, BKHS-D-1410-SS, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 4" O.C deck mount faucet holes, marine edge, side splashes on left & right, 304 stainless steel construction, NSF no drain set included no significant damage noted - see photos

151 - BK Resources BKHS-D-1410-SS - Hand Sink BK Resources, BKHS-D-1410-SS, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 4" O.C deck mount faucet holes, marine edge, side splashes on left & right, 304 stainless steel construction, NSF no drain set included damage to backsplash per photos

152 - BK Resources BKHS-W-1410 - Hand Sink BK Resources, BKHS-W-1410, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 4" OC splash mount faucet holes, marine edge, 8-1/8" backsplash, 304 stainless steel construction, NSF no drain set included no significant damage noted - see photos

153 - BK Resources BKHS-W-1410 - Hand Sink BK Resources, BKHS-W-1410, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 4" OC splash mount faucet holes, marine edge, 8-1/8" backsplash, 304 stainless steel construction, NSF no significant damage noted - see photos

154 - BK Resources BKHS-W-1410 - Hand Sink BK Resources, BKHS-W-1410, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 4" OC splash mount faucet holes, marine edge, 8-1/8" backsplash, 304 stainless steel construction, NSF no significant damage noted - see photos

155 - BK Resources BKHS-W-1410 - Hand Sink BK Resources, BKHS-W-1410, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 4" OC splash mount faucet holes, marine edge, 8-1/8" backsplash, 304 stainless steel construction, NSF no significant damage noted - see photos

156 - BK Resources BKHS-W-1410 - Hand Sink BK Resources, BKHS-W-1410, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 4" OC splash mount faucet holes, marine edge, 8-1/8" backsplash, 304 stainless steel construction, NSF no significant damage noted - see photos

157 - BK Resources BKHS-W-1410 - Hand Sink BK Resources, BKHS-W-1410, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 4" OC splash mount faucet holes, marine edge, 8-1/8" backsplash, 304 stainless steel construction, NSF bends on left & right lower backsplash corners - see photos

158 - BK Resources DDI-0909524 - Drop in Sink BK Resources, DDI-0909524, Deep Drawn Drop-In Sink, one compartment, 11-1/8"W x 13-1/2"D x 5"H overall size, (1) 9" wide x 9" front-to-back x 5" deep compartment, 20/304 stainless steel construction, NSF no significant damage noted - see photos

159 - BK Resources DDI-0909524 - Drop in Sink BK Resources, DDI-0909524, Deep Drawn Drop-In Sink, one compartment, 11-1/8"W x 13-1/2"D x 5"H overall size, (1) 9" wide x 9" front-to-back x 5" deep compartment, 20/304 stainless steel construction, NSF dents in sink bowl per photos

160 - BK Resources BK-DIS-1515 - Drop in Sink BK Resources, BK-DIS-1515, Drop-In Sink, one compartment, 15"W x 15"D x 5-3/4"H overall size, (1) 12" wide x 10" front-to-back x 5-3/4" deep compartment, 4" OC deck mount faucet holes, 20/304 stainless steel construction, 14-9/16" x 14-9/16" cutout with 1-1/2" RA at corners required, NSF small dents per marks - see photos

161 - BK Resources BK-DIS-1515 Hand Sink BK Resources, BK-DIS-1515, Drop-In Sink, one compartment, 15"W x 15"D x 5-3/4"H overall size, (1) 12" wide x 10" front-to-back x 5-3/4" deep compartment, 4" OC deck mount faucet holes, 20/304 stainless steel construction, 14-9/16" x 14-9/16" cutout with 1-1/2" RA at corners required, NSF dents / ripples per photos

162 - BK Resources BKHS-D-SS - Hand Sink BK Resources, BKHS-D-SS, Space Saver Hand Sink, wall mount, 9" wide x 9" front-to-back bowl, 4" O.C. deck mount faucet holes , 1-7/8" drain opening bends on left backsplash - see photos

163 - BK Resources BKHS-D-SS - Hand Sink BK Resources, BKHS-D-SS, Space Saver Hand Sink, wall mount, 9" wide x 9" front-to-back bowl, 4" O.C. deck mount faucet holes , 1-7/8" drain opening bends on left backsplash - see photos

164 - BK Resources BKHS-W-SS - Hand Sink BK Resources, BKHS-W-SS, Space Saver Hand Sink, wall mount, 9" wide x 9" front-to-back x 5" deep bowl, 4" OC splash mount faucet holes, marine edge, 7-7/8"H backsplash, 304 stainless steel construction, NSF right side backsplash corner ding - see photos

165 - BK Resources BKHS-W-SS - Hand Sink BK Resources, BKHS-W-SS, Space Saver Hand Sink, wall mount, 9" wide x 9" front-to-back x 5" deep bowl, 4" OC splash mount faucet holes, marine edge, 7-7/8"H backsplash, 304 stainless steel construction, NSF left & right corner backsplash dings / front corner sink basin dent per photo

166 - BK Resources BKHS-ADA-D - ADA Hand Sink BK Resources, BKHS-ADA-D, ADA Hand Sink, wall mount, 14" wide x 16" front-to-back x 5" deep bowl, 4" OC deck mount faucet holes, 8" backsplash, marine edge, 18/304 stainless steel, ADA Compliant, NSF small ping in sink bowl / r side ding all per photos

167 - BK Resources BKHS-ADA-D - ADA Hand Sink BK Resources, BKHS-ADA-D, ADA Hand Sink, wall mount, 14" wide x 16" front-to-back x 5" deep bowl, 4" OC deck mount faucet holes, 8" backsplash, marine edge, 18/304 stainless steel, ADA Compliant, NSF no significant damage noted - see photos

168 - BK Resources BKHS-ADA-D - ADA Hand Sink BK Resources, BKHS-ADA-D, ADA Hand Sink, wall mount, 14" wide x 16" front-to-back x 5" deep bowl, 4" OC deck mount faucet holes, 8" backsplash, marine edge, 18/304 stainless steel, ADA Compliant, NSF left & right side minor roll of sheet metal - see photos for detail

169 - BK Resources DDI-1614824 - Drop in Sink BK Resources, DDI-1614824, Drop-In Sink, one compartment, 19"W x 19"D x 8"H overall size, (1) 16" wide x 14" front-to-back x 8" deep compartment, 18/304 stainless steel construction, NSF slight bends front right corner per photos

170 - BK Resources DDI-20161224 - Drop in Sink BK Resources, DDI-20161224, Deep Drawn Drop-In Sink, one compartment, 23"W x 21"D x 12"H overall size, (1) 20" wide x 16" front-to-back x 12" deep compartment, 4" OC deck mount faucet holes, 18/304 stainless steel construction, NSF corner bends per photos

171 - BK Resources DDI-20161224 - Drop in Sink BK Resources, DDI-20161224, Deep Drawn Drop-In Sink, one compartment, 23"W x 21"D x 12"H overall size, (1) 20" wide x 16" front-to-back x 12" deep compartment, 4" OC deck mount faucet holes, 18/304 stainless steel construction, NSF corner bends - right side per photos

172 - BK Resources DDI-20161224 - Drop in Sink BK Resources, DDI-20161224, Deep Drawn Drop-In Sink, one compartment, 23"W x 21"D x 12"H overall size, (1) 20" wide x 16" front-to-back x 12" deep compartment, 4" OC deck mount faucet holes, 18/304 stainless steel construction, NSF corner bend right rear per photo

173 - BK Resources BKHS-D-1616 - Hand Sink BK Resources, BKHS-D-1616, Hand Sink, wall mount, 16" wide x 16" front-to-back x 10" deep bowl, single deck mount faucet hole, knee valve bracket (knee valve & spout sold separately), 11"H backsplash, includes mounting hardware, 16/304 stainless steel construction, NSF bowl dents per phot - front mechanism bracket could be removed to use without it in the way

174 - BK Resources BKHS-W-1410-1-BKK - Hand Sink BK Resources, BKHS-W-1410-1-BKK, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, single splash mount faucet hole, 7-3/8"H backsplash, 304 stainless steel construction, NSF (does not include knee valve) left side ding per photo

175 - BK Resources BKHS-D-1410-1SSBKKPG - Hand Sink BK Resources, BKHS-D-1410-1SSBKKPG, Hand Sink wall mount, 14" wide x 10" front-to-back x 5" deep bowl, 7-3/8"H backsplash, dual side splashes, includes knee bracket & wall mounting hardware, no drain included - no faucet included - 304 stainless steel construction, lead free, NSF left side ding per photo

176 - BK Resources BKHS-D-1410-1-BKK - Hand Sink BK Resources, BKHS-D-1410-1-BKK, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, single deck mount faucet hole, 8-1/8"H backsplash, includes: knee & wall brackets, 304 stainless steel construction, NSF (does not include knee valve) no significant damage noted - see photos

177 - BK Resources APHS-W1410-2B - Hand Sink BK Resources, APHS-W1410-2B, Antimicrobial Hand Sink, 14" wide x 10" front-to-back x 5" deep bowl, (2) faucet holes, NSF, cCSAus minor scuffs only - looks like an extra cut has been made in the center - see photos

178 - BK Resources BKHS-W-SS-1-SS-BKK - Hand Sink BK Resources, BKHS-W-SS-1-SS-BKK, Space Saver Hand Sink, wall mount, 9" wide x 9" front-to-back x 5" deep bowl, single splash mount faucet hole, side splashes on left & right, 8"H backsplash, includes: knee valve bracket, 304 stainless steel construction, NSF (does not include knee valve) front left & right corner damage - back right backsplash - see photos

179 - BK Resources BKHS-D-1410-1-BKK - Hand Sink BK Resources, BKHS-D-1410-1-BKK, Hand Sink, wall mount, 14" wide x 10" front-to-back x 5" deep bowl, single deck mount faucet hole, 8-1/8"H backsplash, includes: knee & wall brackets, 304 stainless steel construction, NSF (does not include knee valve) mnor dents - nothing significant - see photos

180 - BK Resources BKHS-W-1620 - Hand Sink BK Resources, BKHS-W-1620, Hand Sink, wall mount, 20" wide x 16" front-to-back x 5" deep bowl, 4" O.C. splash mount faucet holes, 18/304 stainless steel - NSF left & right bend at lower parts of corner / backsplash per photos - straightenable ?

181 - BK Resources BKS-1-18-12 - 1 Compartment Sink BK Resources, BKS-1-18-12, Sink, one compartment, 23-1/2"W x 23-13/16"D x 43-3/4"H overall size, 18" wide x 18" front-to-back x 12" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel deck & bowl, NSF top left backsplash bend - right roll edge dmg - left lower backsplash per photos

182 - BK Resources DDI3-10141024 - Drop In Sink BK Resources, DDI3-10141024, Drop-In Sink, three compartment, 35-3/4"W x 18-1/2"D x 10"H overall size, (3) 10" wide x 14" front-to-back x 10" deep compartments, (1) set of 4" OC deck mount faucet holes, includes (3) basket drains (BKDR-4), 18/304 stainless steel construction, NSF see top edge for rolls on left side of sink - see photos for detail

183 - BK Resources BKMS-1620-6 - Mop Sink BK Resources, BKMS-1620-6, Mop Sink, floor mount, 24-1/2"W x 19-3/8"D x 11"H overall size, 20" wide x 16" front-to-back x 6" deep bowl, 3-1/2" heavy duty brass basket drain (BKDR-HD4), (3) skirted sides, 18/304 stainless steel left rear ding per photo - minor bend

184 - BK Resources BK-DIBL-1218 - Ice Bins (Pair of 2) BK Resources, BK-DIBL-1218, Ice Bin, drop-in, 12"W x 18"D x 14-3/8"H overall, removable sliding cover, 9" wide x 13" front-to-back x 10" deep bin liner, includes 1" drain (BKDR-325CP), fully insulated 304 stainless steel construction, NSF both missing lids - if find? we will split them out to a and b lot

185 - BK Resources BK8BS-1-18-14 1 - Compartment Sink BK Resources, BK8BS-1-18-14, Budget Sink, one compartment, 21"W x 21-1/2"D x 41"H overall size, 18" wide x 18" front-to-back x 14" deep compartment, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, includes basket drains (BKDR-4), 18/430 stainless steel construction, galvanized steel legs with adjustable high-impact corrosion-resistant feet no faucet set included - backsplash is somewhat twisted - damage to upper left backsplash - right side sink dents per photo

186 - BK Resources BKUBS-1014HSS - Underbar Sink BK Resources, BKUBS-1014HSS, Underbar Dump Sink, 12?W x 18-1/4?D x 32-1/2?H, stainless steel construction, 10? wide x 14? front-to-back x 6? deep bowl, NSF backsplash twisted - can prob be straightened - see photos for detail

187 - BK Resource BKS-3-1620-14-18T -3 Compartment Sink BK Resources, BKS-3-1620-14-18T, Sink, three compartment, 84"W x 25-13/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, NSF no leg set included backsplash twisted - roll edge dents per photo - left sink bulge in bottom - see photo

188 - BK Resources BKS6-2-24-14S - 2 Compartment Sink BK Resources, BKS6-2-24-14S, Sink, two compartment, 53-1/8"W x 29-1/2"D x 44-1/16"H overall size, 24" wide x 24" front-to-back x 14" deep compartments, 10"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, includes basket drains, 16/304 stainless steel deck & bowls, NSF no leg set included scratches, small dents but nothing noticable - see photos

189 - BK Resources BK8BS-2-18-12 - 2 Compartment Sink BK Resources, BK8BS-2-18-12, Budget Sink, two compartment, 39"W x 21-1/2"D x 41"H overall size, 18" wide x 18" front-to-back x 12" deep compartments, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, includes basket drains (BKDR-4), 18/430 stainless steel construction, NSF no leg set included - no faucet included - minor scratches only - see photos

190 - BK Resources BK8BS-3-1221-12 - 3 Compartment Sink BK Resources, BK8BS-3-1221-12, Budget Sink, three compartment, 39"W x 24-1/2"D x 41"H overall size, 12" wide x 21" front-to-back x 12" deep compartments, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, includes basket drains (BKDR-4), 18/430 stainless steel construction, NSF no leg set included left backsplash end damage - left roll corner damage - see photos

191 - BK Resources BK8BS-3-1221-12 - 3 Compartment Sink BK Resources, BK8BS-3-1221-12, Budget Sink, three compartment, 39"W x 24-1/2"D x 41"H overall size, 12" wide x 21" front-to-back x 12" deep compartments, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, includes basket drains (BKDR-4), 18/430 stainless steel construction, NSF no leg set included very little to no damage - scratches only - see photos

192 - BK Resources VTT-9630 - Work Table BK Resources, VTT-9630, Work Table, 96"W x 30"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, (6) 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF damage to end of stainless per photo - straightenable? / galv bottom - some rust / small bend per photo

193 - BK Resources VTT-9630 - Work Table BK Resources, VTT-9630, Work Table, 96"W x 30"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, (6) 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF some mild bends on top per xx photo / bends on one side of galvanized bottom per photo

194 - BK Resources VTTR-8424 - Work Table BK Resources, VTTR-8424, Work Table, 84"W x 24"D, 18/430 stainless steel top, with turndown edges front & sides, reinforced with channels, 1-1/2" rear riser, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF small dent on top stainless midway - galv undershelf rust & corrosion - see photos

195 - BK Resources SHF-3072 - Shelf for Multiple Units BK Resources, SHF-3072, Optional Shelf, (1) removable shelf, fits CST-3072, CST-3072S, CSTR5-3072, & CSTR5-3072S bend to one corner - see photos for details

196 - BK Resources SHF-3072 - Shelf for Multiple Units BK Resources, SHF-3072, Optional Shelf, (1) removable shelf, fits CST-3072, CST-3072S, CSTR5-3072, & CSTR5-3072S bend to one corner - see photos for details

197 - BK Resources WST-4830 - Work Table BK Resources, WST-4830 Work Table, 48?W x 30?D, 18/304 stainless steel top with turndown edges on all sides & reinforced with channels, stainless steel adjustable undershelf, stainless steel legs with adjustable bullet feet, NSF damage to top edge per photos - corrosion to bottom galvanized easily cleaned - see photos

198 - BK Resources SVET-1530 - Equipment Stand BK Resources, SVET-1530, Equipment Stand, 16"W x 30"D x 26"H, 18/430 stainless steel top reinforced with 1-1/2" square tubing, with 2" 90ø up-turn on sides & back, stainless steel adjustable undershelf & legs, adjustable bullet feet, NSF stainless top - bend at end per photo / stainless lower shelf dings per photo

199 - BK Resources SVT-3030 - Work Table BK Resources, SVT-3030, Work Table, 30"W x 30"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable stainless steel undershelf, 1-5/8" dia. stainless steel legs, stainless steel over plastic adjustable bullet feet, NSF Stainless top - bend per photo / stainless bottom no noticeable damage - see photos

200 - BK Resources VTTR5-4830 - Work Table BK Resources, VTTR5-4830, Work Table, 48"W x 30"D, 18/430 stainless steel top, with turndown edges on front & sides, reinforced with channels, 5" backsplash, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF damage to left & right side of top near rear / no damage to stainless bottom (subbed) see photos

201 - BK Resources VTT-4830 - Work Table BK Resources, VTT-4830, Work Table, 48"W x 30"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF top all (4) corners bends per photos / bottom missing one corner - see photos

202 - BK Resources EETS-3630 - Economy Equipment Stand BK Resources, EETS-3630, Economy Equipment Stand, 36"W x 30"D, 23" working height, 18/430 stainless steel top reinforced with support channels, three-sided 1-1/2" riser with hemmed edges, adjustable galvanized undershelf, galvanized legs & adjustable stainless steel feet, NSF left rear corner top - slight bend - bottom no notable issues - see photos

203 - BK Resources BK-OSS-1860 - Overshelf plus bonus BK Resources, BK-OSS-1860, Single Overshelf, table mount, 60"W x 18"D x 18"H, 18/304 stainless steel, self tapping screws, include additional through shelf so you can make your own set - NSF Over shelf is ok plus extra shelf - some dents - see photos

204 - BK Resources BK-OSD-1860 - Double Overshelf BK Resources, BK-OSD-1860, Double Overshelf, table mount, 60"W x 18"D x 31-1/4"H, 18/304 stainless steel, adjustable lower shelf, self tapping screws, NSF damage per photo - majority without issue

205 - BK Resources BK-OSD-1896 - Double Overshelf BK Resources, BK-OSD-1896, Double Overshelf, table mount, 96"W x 18"D x 31-1/4"H, 18/304 stainless steel, adjustable lower shelf, self tapping screws, NS see damage xx per photos

206 - BK Resources BKCDT-72-R - Clean Dishtable BK Resources, BKCDT-72-R, Clean Dishtable, straight design, 72"W x 30-3/8"D x 46-1/4"H, left-to-right operation, 18/304 stainless steel top, 10"H backsplash, raised rolled edge on front & side, galvanized legs & side bracing, high impact corrosion resistant adjustable bullet feet, NSF small dents / larger marked per photos

207 - BK Resources CTTR5-7230 - Work Table BK Resources, CTTR5-7230, Work Table, 72"W x 30"D x 39-3/4"H overall size, 16/304 stainless steel top with 5"H backsplash, reinforced with (2) 5" C channels, adjustable galvanized undershelf, (4) 1-5/8" dia. galvanized legs, adjustable high-impact, corrosion-resistant feet, NSF left side backsplash bend per photo / will need rust buffed out

208 - BK Resources BKUCDT-50-L - Soiled Dishtable BK Resources, BKUCDT-50-L, Soiled Dishtable, undercounter, 50"W x 30"D x 46"H, left-to-right operation, 18/304 stainless steel top, 20" x 20" x 8" deep pre-rinse sink, 8" OC splash mount faucet holes, 10"H backsplash, raised rolled edges on front & sides, includes basket drain (BKDR-4), galvanized legs & side bracing, high-impact corrosion-resistant adjustable bullet feet, NSF left side near backstop small repairable dent - front left corner damage see photos for detail

209 - BK Resources BKUCDT-60-L - Soiled Dishtable BK Resources, BKUCDT-60-L, Soiled Dishtable, undercounter, 60"W x 30"D x 46"H, left-to-right operation, 18/304 stainless steel top, 20" x 20" x 8" deep pre-rinse sink, 8" OC splash mount faucet holes, 10"H backsplash, raised rolled edges on front & sides, includes basket drain (BKDR-4), galvanized legs & side bracing, high-impact corrosion-resistant adjustable bullet feet, NSF left side roll by sink / dents on top rear of right side of sink - see photos for detail

210 - BK Resource SVOTOB-8430 -Work Table w/bonus shelve BK Resources, SVTOB-8430, Work Table, 84"W x 30"D, 18/430 stainless steel top, galvanized bottom shelf, with turndown edges on all sides, reinforced with channels, 1-5/8" dia. galvanized steel over plastic adjustable bullet feet, NSF stainless top w/front & rear bends per photo / straightenable - bottom w/minor crease or so - see photos

211 - BK Resources VTTR-8430 - Work Table BK Resources, VTTR-8430, Work Table, 84"W x 30"D, 18/430 stainless steel top, with turndown edges front & sides, reinforced with channels, 1-1/2" rear riser, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF top backsplash minor bends per photos / front edge per photo / see all details via photos

212 - BK Resources VTT-9630 - Work Table BK Resources, VTT-9630, Work Table, 96"W x 30"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, (6) 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF dings on top per xx - edges all per photo / both shelves cardboard needs soaked off

213 - BK Resources VETS-6030 - Equipment Stand BK Resources, VETS-6030, Equipment Stand, 61"W x 30"D x 26"H, front rolled edge, 3 sided 2" riser with hemmed edged, 18/430 stainless steel top reinforced with 1-1/2" square tubing, galvanized undershelf & 1-5/8" legs, NSF damage to rear left of top per photo / bottom ok - none noticeable - see photos

214 - BK Resources SVTR-3630 - Work Table BK Resources, SVTR-3630, Work Table, 36"W x 30"D, 18/430 stainless steel top, with turndown edges on front & sides, reinforced with channels, 1-1/2" rear riser, adjustable stainless steel undershelf, 1-5/8" dia. stainless steel legs, stainless steel over plastic adjustable bullet feet, NSF no notable damage to top / galvanized bottom needs polished off - see photos

215 - BK Resources SVT-1836 - Work Table BK Resources, SVT-1836, Work Table, 36"W x 18"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable stainless steel undershelf, 1-5/8" dia. stainless steel legs, stainless steel over plastic adjustable bullet feet, NSF dent front right corner per photo / rest of shelving ok - see photos for detail

216 - BK Resources SVTR5-2424 - Work Table BK Resources, SVTR5-2424, Work Table, 24"W x 24"D, 18/430 stainless steel top, with turndown edges on front & sides, reinforced with channels, 5" backsplash, adjustable stainless steel undershelf, 1-5/8" dia. stainless steel legs, stainless steel bullet feet, NSF no notable damage / scratches - scuffs only / see photos for detail

217 - BK Resources VTT-1836 - Work Table BK Resources, VTT-1836, Work Table, 36"W x 18"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF minor dings on top per photo - galvanized bottom ok - see photos for detail

218 - BK Resources VTT-3624 - Work Table BK Resources, VTT-3624, Work Table, 36"W x 24"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF small ding on top / side dings minor / bottom galvanized needs cleanup but ok - see photos for detail

219 - BK Resources VTTR-3624 - Work Table BK Resources, VTTR-3624, Work Table, 36"W x 24"D, 18/430 stainless steel top, with turndown edges on front & sides, reinforced with channels, 1-1/2" rear riser, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF small bends on corner of backsplash easily straightenable / lower ok w/typical corrosion - see photos

220 - BK Resources SVTROB-3030 - Work Table BK Resources, SVTROB-3030, Work Table, 30"W x 30"D, 18/430 stainless steel top, with turndown edges on front & sides, reinforced with channels, 1-1/2" rear riser, open base with stainless steel side & rear bracing, 1-5/8" dia. stainless steel legs, adjustable stainless steel bullet feet, ships KD, NSF scratches only to top / bottom galvanized needs cleaned - see photos for detail

221 - BK Resources VFTS-1530 - Filler Table BK Resources, VFTS-1530, Filler Table, 15"W x 30"D x 36-1/4"H, 18/430 stainless steel top, 1-1/2" riser at rear, adjustable galvanized steel undershelf, galvanized steel legs with adjustable high-impact corrosion-resistant feet, NSF back left backsplash bends - straightenable? / bottom galv ok - needs cleaning only - see photos

222 - BK Resources VTT-3624 - Work Table BK Resources, VTT-3624, Work Table, 36"W x 24"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF small bends to front right top nearly un-noticeable / bottom end damage per photo - straightenable?

223 - BK Resources VTTR-3024 - Work Table BK Resources, VTTR-3024, Work Table, 30"W x 24"D, 18/430 stainless steel top, with turndown edges on front & sides, reinforced with channels, 1-1/2" rear riser, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF right side on backsplash slight straightenable bends / small bends per photo on bottom - straightenable?

224 - BK Resources VFTS-1830 - Filler Table BK Resources, VFTS-1830, Filler Table, 18"W x 30"D x 36-1/4"H, 18/430 stainless steel top, 1-1/2" riser at rear, adjustable galvanized steel undershelf, galvanized steel legs with adjustable high-impact corrosion-resistant feet, NSF top front slight bends / right side top bend see photo / bottom galvanized ok - see photos for detail

225 - BK Resources VETS-3630 - Equipment Stand BK Resources, VETS-3630, Equipment Stand, 37"W x 30"D x 26"H, front rolled edge, 3 sided 2" riser with hemmed edged, 18/430 stainless steel top reinforced with 1-1/2" square tubing, galvanized undershelf & 1-5/8" legs, NSF top left edge slight bend - rear slight bends per photo - pings in galvanized bottom - see photos for detail

226 - BK Resources VETS-6030 - Equipment Stand BK Resources, VETS-6030, Equipment Stand, 61"W x 30"D x 26"H, front rolled edge, 3 sided 2" riser with hemmed edged, 18/430 stainless steel top reinforced with 1-1/2" square tubing, galvanized undershelf & 1-5/8" legs, NSF front right corner damage per photo / lower left edge on galvanized bottom - see photos for detail

227 - BK Resources CTTR5-7230 - Work Table BK Resources, CTTR5-7230, Work Table, 72"W x 30"D x 39-3/4"H overall size, 16/304 stainless steel top with 5"H backsplash, reinforced with (2) 5" C channels, adjustable galvanized undershelf, (4) 1-5/8" dia. galvanized legs, adjustable high-impact, corrosion-resistant feet, NSF no noticeable top damage / no noticable bottom damage - review all per photo

228 - BK Resources VTTR5-6030 - Work Table BK Resources, VTTR5-6030, Work Table, 60"W x 30"D, 18/430 stainless steel top, with turndown edges on front & sides, reinforced with channels, 5" backsplash, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF middle backsplash slight bend / both backsplash corners minor repairable bends - bottom galv minor dings

229 - BK Resources CTT-4824 - Work Table BK Resources, CTT-4824, Work Table, 48"W x 24"D x 34-3/4"H, 16/304 stainless steel top reinforced with (2) 5" C channels, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact, corrosion-resistant feet, NSF no notable damge to top / scratches only - bottom galvanized small dent on one end - see photos

230 - BK Resources SVT-4824 - Work Table BK Resources, SVT-4824, Work Table, 48"W x 24"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable stainless steel undershelf, 1-5/8" dia. stainless steel legs, stainless steel over plastic adjustable bullet feet, NSF top dent damage per photo - straightenable edge bends per photo / bottom stainless dent - see photo

231 - BK Resources VTT-3624 - Work Table BK Resources, VTT-3624, Work Table, 36"W x 24"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF top minor spot weld dings on outer edge / bottom galvanized minor bend per photo - see photos

232 - BK Resources Aluminum Proof Shelf Sides BK Resources, Aluminum Proof Rack Sides, 26" x 65" (2) sides total see photos for overall condtion

233 - BK Resources VTTR5-4830 - Work Table BK Resources, VTTR5-4830, Work Table, 48"W x 30"D, 18/430 stainless steel top, with turndown edges on front & sides, reinforced with channels, 5" backsplash, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF small bends to right side of top - see photo / galvanized undershelf dings corrosion only see photos

234 - BK Resources BK-MIB-2411 - Mobile Ice Bin BK Resources, BK-MIB-2411, Mobile Ice Bin, with sliding lid, 11"W x 24"D x 29"H, stainless steel, 53lb. capacity, removable bottom tray, drain valve in rear of unit, 3" casters with brake small bend to front right top - near negligible - see photos for actual details

235 - BK Resources BKWCH-1548 - Wall Mount Cabinet BK Resources, BKWCH-1548, Cabinet, wall mount, 48"W x 15"D x 32-1/2"H, enclosed front, (2) solid double-pin hinged doors, (1) fully adjustable shelf, 18/304 stainless steel construction, NSF minor scratches only - doors open and close as should - see photos for details

236 - BK Resources BK-DIBL-2818 - Ice Bin BK Resources, BK-DIBL-2818, Ice Bin, drop-in, 28"W x 18"D x 14-3/8"H overall, removable sliding cover, 24" wide x 13" front-to-back x 10" deep bin liner, includes 1" drain (BKDR-325CP), fully insulated 304 stainless steel construction, NSF very slight bends at two corners - straightenable ? / sliding doors work great - see photos for detail

237 - BK Resources BK-DIWSBL-2118X - Drop-In Ice & Water BK Resources, BK-DIWSBL-2118X, Ice & Water Unit, drop-in, 18"W x 21"D O.A., ice bin with 11" deep liner & removable sliding cover, water filler station with perforated insert, includes BKDR-325CP & BKDR-15CP drains, 304 stainless steel construction, 17-1/8" x 20" cutout recommended, NSF includes drain / no water station / cutouts present for prev / no lids - make your own

238 - BK Resources BKIB-3612-21S - Underbar Ice Bin BK Resources, BKIB-3612-21S, Underbar Ice Bin, with cold plate, 36"W x 21"D x 32-1/2"H, 18/304 stainless steel construction, 4"H backsplash, 12-9/16" deep insulated ice bin, 8-circuit aluminum cold plate, 120ÿlbs. capacity, 1" NPS drain with drain plug, stainless steel legs & side crossbracing with adjustable high-impact corrosion-resistant feet normal scuffs / scratches - see photos for complete detail

239 - BK Resources BKMS-2424-12 - Mop Sink Floor Mount BK Resources, BKMS-2424-12, Mop Sink, floor mount, 28-3/4"W x 27-1/2"D x 18-3/8"H overall size, 24" wide x 24" front-to-back x 12" deep bowl, 3-1/2" heavy duty brass basket drain (BKDR-HD4), (3) skirted sides, 18/304 stainless steel backsplash bend - straightenable - see photos for detail

240 - BK Resources BKMS-2424-12 - Mop Sink Floor Mount BK Resources, BKMS-2424-12, Mop Sink, floor mount, 28-3/4"W x 27-1/2"D x 18-3/8"H overall size, 24" wide x 24" front-to-back x 12" deep bowl, 3-1/2" heavy duty brass basket drain (BKDR-HD4), (3) skirted sides, 18/304 stainless steel backsplash bend - straightenable - see photos for detail

241 - BK Resources BKMS-2424-12 - Mop Sink Floor Mount BK Resources, BKMS-2424-12, Mop Sink, floor mount, 28-3/4"W x 27-1/2"D x 18-3/8"H overall size, 24" wide x 24" front-to-back x 12" deep bowl, 3-1/2" heavy duty brass basket drain (BKDR-HD4), (3) skirted sides, 18/304 stainless steel no notable damage - see photos for detail

242 - BK Resources VTT-7230 - Work Table BK Resources, VTT-7230, Work Table, 72"W x 30"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF top ding per photo / underside shelf stainless subbed for / damage & slight bends per photo detail

243 - BK Resources BK-OSS-1272 - Single Overshelf (3) to BK Resources, BK-OSS-1272, Single Overshelf, table mount, 72"W x 12"D x 18"H, 18/304 stainless steel, NSF includes (3) leg sets for cabinet side mount / minor scratches - See photos for detail

244 - BK Resources BK-OSS-1272 - Single Overshelf (3) BK Resources, BK-OSS-1272, Single Overshelf, table mount, 72"W x 12"D x 18"H, 18/304 stainless steel, NSF includes (3) leg sets for cabinet side mount / minor scratches - See photos for detail

245 - BK Resources BK-OSS-1272 - Single Overshelf (3) BK Resources, BK-OSS-1272, Single Overshelf, table mount, 72"W x 12"D x 18"H, 18/304 stainless steel, NSF includes (3) leg sets for cabinet side mount / minor scratches - See photos for detail

246 - BK Resources BK-OSS-1272 - Single Overshelf (3) BK Resources, BK-OSS-1272, Single Overshelf, table mount, 72"W x 12"D x 18"H, 18/304 stainless steel, NSF includes (3) leg sets for cabinet side mount / minor scratches - See photos for detail

247 - BK Resources BK-OSS-1272 - Single Overshelf (3) BK Resources, BK-OSS-1272, Single Overshelf, table mount, 72"W x 12"D x 18"H, 18/304 stainless steel, NSF includes (3) leg sets for cabinet side mount / minor scratches - See photos for detail

248 - BK Resources BK-OSS-1272 - Single Undershelf (1) BK Resources, BK-OSS-1272, Single Undershelf, table mount, 72"W x 12"D x 18"H, 18/304 stainless steel, NSF minor scratches - see photos / this is an undershelf for the previous lots

249 - BK Resources BKWSE-1660 - Economy Shelf BK Resources, BKWSE-1660, Economy Shelf, wall-mounted, 60"W x 16"D, 18/430 stainless steel, 1-1/2"H rear up-turn, (2) 11-1/2" angle supports, NSF bends on backsplash x 3 - straightenable ? - see photos for detail

250 - BK Resources BKWS-1672 - Premium Shelf BK Resources, BKWS-1672, Premium Shelf, wall-mounted, 72"W x 16"D, 18/304 stainless steel, 1-1/2"H rear up-turn, (3) 11-1/2" angle supports, NSF bends on backsplash per photos / straightenable ?

251 - BK Resources BKWSE-1284 - Economy Shelf BK Resources, BKWSE-1284, Economy Shelf, wall-mounted, 84"W x 12"D, 18/430 stainless steel, 1-1/2"H rear up-turn, (3) 8" angle supports, NSF minor bend on right side / straightenable - see photos for detail

252 - BK Resources BK-GT-50 - Grease Trap BK Resources, BK-GT-50, Grease Trap, 50 lbs. grease capacity, 25 gallons per minute, non-skid deck plate, removable baffles, no hub connections, includes T-Vent, main body suspended above floor, 11 gauge carbon steel construction with corrosion resistant coating see photos for detail

253 - BK Resources BK-GT-20 - Grease Trap BK Resources, BK-GT-20, Grease Trap, 20 lbs. grease capacity, 10 gallons per minute, non-skid deck plate, removable baffles, no hub connections, includes T-Vent, main body suspended above floor, 11 gauge carbon steel construction with corrosion resistant coating see photos for detail

254 - BK Resources BKWSE-1696 - Economy Shelf BK Resources, BKWSE-1696, Economy Shelf, wall-mounted, 96"W x 16"D, 18/430 stainless steel, 1-1/2"H rear up-turn, (3) 11-1/2" angle supports, NSF includes brackets / damage/bends per photo - straightenable?

255 - BK Resources BK-URTR-48 - Urn Trough w/Drip Tray BK Resources, BK-URTR-48, Urn Trough with Drip Plate, 48"L, 7/8" deep tray, removable, 1" flush mount & 1/4" rounded corners trim plate, 1-1/4 " OD drain, 14/304 stainless steel, mounting hardware included 4' / 5' / 6' - bends per photos - overall great shape - will be separating these

256 - BK Resources Stainless Doors BK Resources, Stainless Cabinent doors w/damage as noted in photos pair - damage per photo - do not believe they would be suitable for reuse but rather for the metal

257 - BK Resources MSHSA-48W2 - Handwash Sink BK Resources, MSHSA-48W2, ADA Two Station Handwash Sink, wall mount, (2) sets of 8" OC splash mount faucet holes, 48"W x 16-1/4" front-to-back x 5" deep bowl, 14/304 stainless steel sink, NSF, ADA Compliant no siginificant damage noted - includes drain & hanging hardware - see photos

258 - BK Resources MSU-60PG - Urinal BK Resources, MSU-60PG, Urinal, wall mount design, 60", full length sloping backsplash, with flush pipe, includes wall mounting brackets & basket drain, 14/304 stainless steel no notable damage / see photos

259 - BK Resources MSU-60PG - Urinal BK Resources, MSU-60PG, Urinal, wall mount design, 60", full length sloping backsplash, with flush pipe, includes wall mounting brackets & basket drain, 14/304 stainless steel slight bend on right side backsplash - see photos for detail

260 - BK Resources BKUS-1-18-14 - Utility Sink BK Resources, BKUS-1-18-14, Utility Sink, one compartment, 21"W x 21-1/2"D x 41-1/4"H overall size, 18" wide x 18" front-to-back x 14" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, 18/304 stainless steel deck & bowl, NSF no drain set included no leg set included backsplash rolled in slightly - straightenable? / see photo for details

261 - BK Resources BKUBS-224S - Underbar Sink BK Resources, BKUBS-224S, Underbar Sink, two compartment, 24?W x 21-1/4"D x 32-1/2"H, 18/304 stainless steel construction, 10" wide x 14" front-to-back x 10" deep compartments, 4-1/2"H backsplash, 4" O.C. deck mount lead-free faucet (BKD-10-G), stainless steel apron on front & sides, no leg set included - no faucet set included - no drain included NSF no notable damage / see photos

262 - BK Resources BK-DIBL-2218 - Ice Bin BK Resources, BK-DIBL-2218, Ice Bin, drop-in, 22"W x 18"D x 14-3/8"H overall, removable sliding cover, 18" wide x 13" front-to-back x 10" deep bin liner, fully insulated 304 stainless steel construction, NSF no drain set included sliding lid missing / slight bend to front right - see photos for detail

263 - BK Resources BKUS-1-18-14 - Utility Sink BK Resources, BKUS-1-18-14, Utility Sink, one compartment, 21"W x 21-1/2"D x 41-1/4"H overall size, 18" wide x 18" front-to-back x 14" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, 18/304 stainless steel deck & bowl, NSF no leg set included no notable damage - see photos for detail

264 - BK Resources BKUS-1-18-14 - Utility Sink BK Resources, BKUS-1-18-14, Utility Sink, one compartment, 21"W x 21-1/2"D x 41-1/4"H overall size, 18" wide x 18" front-to-back x 14" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, 18/304 stainless steel deck & bowl, NSF no leg set included no notable damage - see photos for detail

265 - BK Resources BK8BS-1-18-14 - Budget Sink BK Resources, BK8BS-1-18-14, Budget Sink, one compartment, 21"W x 21-1/2"D x 41"H overall size, 18" wide x 18" front-to-back x 14" deep compartment, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, 18/430 stainless steel construction, NSF no drain set included no leg set included - no faucet set included - left & front roll dings - see photos for detail

266 - BK Resources BK8BS-1-18-14 - Budget Sink BK Resources, BK8BS-1-18-14, Budget Sink, one compartment, 21"W x 21-1/2"D x 41"H overall size, 18" wide x 18" front-to-back x 14" deep compartment, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, 18/430 stainless steel construction, NSF no drain set included no leg set included- no faucet set included - right side backsplash ding per photos - missing left rear leg mount (make your own)

267 - BK Resources BK8BS-1-24-14 - Budget Sink BK Resources, BK8BS-1-24-14, Budget Sink, one compartment, 27"W x 27-1/2"D x 41"H overall size, 24" wide x 24" front-to-back x 14" deep compartment, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, includes basket drains (BKDR-4), 18/430 stainless steel construction, NSF no leg set included - no faucet set included - scratches only per photos

268 - BK Resources BK8BS-1-24-14 - Budget Sink BK Resources, BK8BS-1-24-14, Budget Sink, one compartment, 27"W x 27-1/2"D x 41"H overall size, 24" wide x 24" front-to-back x 14" deep compartment, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, includes basket drains (BKDR-4), 18/430 stainless steel construction, NSF no leg set included - no faucet set included - left & right side backsplash damage per photos

269 - BK Resources BK8BS-1-24-14 - Budget Sink BK Resources, BK8BS-1-24-14, Budget Sink, one compartment, 27"W x 27-1/2"D x 41"H overall size, 24" wide x 24" front-to-back x 14" deep compartment, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, includes basket drains (BKDR-4), 18/430 stainless steel construction, NSF - no leg set included - no faucet set included - left side backsplash damage per photo

270 - BK Resources BKUS-1-24-14 - Utility Sink BK Resources, BKUS-1-24-14, Utility Sink, one compartment, 27"W x 27-1/2"D x 41-1/4"H overall size, 24" wide x 24" front-to-back x 14" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, 18/304 stainless steel deck & bowl, NSF no leg set included - no faucet set included - right roll damage x - backsplash damage x - rear of sink damage per x - see photos for detail

271 - BK Resources BKS6-2-24-14S - 2 Compartment Sink BK Resources, BKS6-2-24-14S, Sink, two compartment, 53-1/8"W x 29-1/2"D x 44-1/16"H overall size, 24" wide x 24" front-to-back x 14" deep compartments, 10"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, includes basket drains, 16/304 stainless steel deck & bowls, NSF no leg set included backsplash slightly leaned - no other notable damage - see photos for detail

272 - BK Resources BKUS-1-24-14 - Utility Sink BK Resources, BKUS-1-24-14, Utility Sink, one compartment, 27"W x 27-1/2"D x 41-1/4"H overall size, 24" wide x 24" front-to-back x 14" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, 18/304 stainless steel deck & bowl, NSF no leg set included backsplash lean on left side - front roll edge damage - see photo for details

273 - BK Resources BK-Post-3-38 - 3" Table Post BK Resources, BK-Post-Only, 3" x 38" table replacement post (6) total in this lot one of the six has damage - see photos for detail

274 - BK Resources BK8BS-1-24-14 - Budget Sink BK Resources, BK8BS-1-24-14, Budget Sink, one compartment, 27"W x 27-1/2"D x 41"H overall size, 24" wide x 24" front-to-back x 14" deep compartment, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, includes basket drains (BKDR-4), 18/430 stainless steel construction, NSF no leg set included - no faucet set included - front roll edge damage - per photos

275 - BK Resources BK8BS-1-24-14 - Budget Sink BK Resources, BK8BS-1-24-14, Budget Sink, one compartment, 27"W x 27-1/2"D x 41"H overall size, 24" wide x 24" front-to-back x 14" deep compartment, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, includes basket drains (BKDR-4), 18/430 stainless steel construction, NSF no leg set included - no faucet set included -front roll edge damage - per photos

276 - BK Resources BKS-1-18-12 - 1 Compartment Sink BK Resources, BKS-1-18-12, Sink, one compartment, 23-1/2"W x 23-13/16"D x 43-3/4"H overall size, 18" wide x 18" front-to-back x 12" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel deck & bowl, NSF no leg set included left & front roll edge dings / backsplash slight rolled on left side - straightenable ? See photos for detail

277 - BK Resources BKS-1-1620-12-18R -1 Compartment Sink BK Resources, BKS-1-1620-12-18R, Sink, one compartment, 36-1/2"W x 25-13/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 12" deep compartment, 18" drainboard on right, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drain (BKDR-4), 18/304 stainless steel construction, NSF no leg set included no notable damage / see photos

278 - BK Resources BKS-1-1620-12-18R -1 Compartment Sink BK Resources, BKS-1-1620-12-18R, Sink, one compartment, 36-1/2"W x 25-13/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 12" deep compartment, 18" drainboard on right, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drain (BKDR-4), 18/304 stainless steel construction, NSF no leg set included left side roll edge damage / backsplash left side top damage - see photos for details

279 - BK Resources BKS-1-1620-12-18R -1 Compartment Sink BK Resources, BKS-1-1620-12-18R, Sink, one compartment, 36-1/2"W x 25-13/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 12" deep compartment, 18" drainboard on right, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drain (BKDR-4), 18/304 stainless steel construction, NSF no leg set included left side backsplash slightly rolled - straightenable/ / small dent front side roll edge - ctr of sink

280 - BK Resources ES-1-18-12-18L - Economy Sink BK Resources, ES-1-18-12-18L, Economy Sink, one compartment, 38-1/2"W x 23-13/16"D x 43-3/4"H overall size, 18" wide x 18" front-to-back x 12" deep compartments, 18" left drainboard, 9"H backsplash, 1-1/2" rounded front & side edges, 8" OC splash mount faucet holes, drain included, 18 gauge stainless steel deck & bowls, galvanized legs, adjustable high impact corrosion resistant feet, NSF no leg set included left & right side backsplash roll per photos - no other noted damage

281 - BK Resources BKS-1-18-12-18R - 1 Compartment Sink BK Resources, BKS-1-18-12-18R, Sink, one compartment, 38-1/2"W x 23-13/16"D x 43-3/4"H overall size, 18" wide x 18" front-to-back x 12" deep compartment, 18" drainboard on right, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drain (BKDR-4), 18/304 stainless steel construction, galvanized steel legs, adjustable high impact corrosion resistant feet, NSF no leg set included left side roll edge damage per photo / right side backsplash slight tilt - see photos for details

282 - BK Resources BK8BS-1-18-14 - Budget Sink BK Resources, BK8BS-1-18-14, Budget Sink, one compartment, 21"W x 21-1/2"D x 41"H overall size, 18" wide x 18" front-to-back x 14" deep compartment, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, includes basket drains (BKDR-4), 18/430 stainless steel construction, NSF no leg set included - no faucet set included - right side roll edge damage per photo detail

283 - BK Resources BK8BS-1-18-14 - Budget Sink BK Resources, BK8BS-1-18-14, Budget Sink, one compartment, 21"W x 21-1/2"D x 41"H overall size, 18" wide x 18" front-to-back x 14" deep compartment, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, includes basket drains (BKDR-4), 18/430 stainless steel construction, NSF no leg set included - no faucet set included - top backsplash bend per photo

284 - BK Resources BKS-1-1620-12-18R -1 Compartment Sink BK Resources, BKS-1-1620-12, Sink, one compartment, 21"W x 25-13/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 12" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel deck & bowl, NSF no leg set included backsplash slightly rolled from right side - straightenable? / right corner roll slight deformed

285 - BK Resources BKS-1-1620-12-18R -1 Compartment Sink BK Resources, BKS-1-1620-12, Sink, one compartment, 21"W x 25-13/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 12" deep compartment, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel deck & bowl, NSF no leg set included backsplash slight roll forward on right side - see photos for details

286 - BK Resources BK8BS-1-1821-14 - Budget Sink BK Resources, BK8BS-1-1821-14, Budget Sink, one compartment, 21"W x 24-1/2"D x 41"H overall size, 18" wide x 21" front-to-back x 14" deep compartment, 8"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, square corners, includes basket drains (BKDR-4), 18/430 stainless steel construction, NSF no leg set included- no faucet set included - backsplash dents per photo detail

287 - BK Resources BKUBS-1410BSS - Blender Station BK Resources, BKUBS-1410BSS, Blender Station, with dump sink, 18 x 21-1/4 in., 18 gauge stainless steel construction, 14 in. wide x 10 in. front-to-back x 6 in. deep sink bowl with 1-1/2 in. drain, 4 in. O.C. splash mount faucet holes, 17-3/4 in. W x 5 in. D blender station shelf, NSF no leg set included - faucet set not included - right & left s/s bent - see photos for detail

288 - BK Resource BKUB-LD24-21S -Underbar Liquor Display BK Resources, BKUB-LD24-21S- Stainless Steel Underbar Liquor Display, 24"Wx21-1/4"D The underbar liquor display is made of 18/304 stainless steel. It has 4 steps with guard rails and holds approximately 27 bottles. Approximate capacities are based on a 1L bottle 3-1/2" diameter. Standard height is 32-1/2"H and is NSF listed. no leg set included right & left returns bent per photo - backsplash bent per photo

289 - BK Resources UB4-21-1014HSS - Underbar Dump Sink BK Resources, UB4-21-1014HSS, Underbar Dump Sink, 14-1/2"W x 21-1/4"D x 32-1/2"H overall size, 10" wide x 14" front-to-back x 6" deep bowl, 4"H backsplash, 4" OC deck mount faucet holes, 18/304 stainless steel top, stainless steel legs & bracing, adjustable high impact corrosion resistant feet, NSF no leg set included right side bends per photos

290 - BK Resources BKUBD-24-21S - Underbar Drainboard BK Resources, BKUBD-24-21S, Stainless Steel Underbar Stamped Drainboard-24"Wx21-1/4"Dx32-1/2"H Constructed from 18ga T-304 stainless steel the underbar stamped drainboard has stainless steel legs and bracing. It has a 4" backsplash and adjustable high impact corrosion resistant feet. It also includes a drain and is NSF listed no drain set included seems to be slightly twisted - really un-noticeable but back support strap suggests - see photos

291 - BK Resources BKS-3-1620-14-18T -3 Compartment Sink BK Resources, BKS-3-1620-14-18T, Sink, three compartment, 84"W x 25-13/16"D x 43-3/4"H overall size, 16" wide x 20" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, 18/304 stainless steel construction, NSF no leg set included left rear corner dents per photos / otherwise just scratches and rubs - see photos for details

292 - BK Resources BKS-3-1416-12-12T - Convenience Store BK Resources, BKS-3-1416-12-12T, Convenience Store Sink, three compartment, 66"W x 21-13/16"D x 39-3/4"H overall size, 14" wide x 16" front-to-back x 12" deep compartments, (2) left & right 12" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains, 18/304 stainless steel deck & bowl, NSF no leg set included - no faucet set included -left side roll bends per photos - bend in front of left sink per photos

293 - BK Resources UB4-21-1014HSS12 - Underbar Dump Sink BK Resources, UB4-21-1014HSS12, Underbar Dump Sink, 12"W x 21-1/4"D x 32-1/2"H overall size, 10" wide x 14" front-to-back x 6" deep bowl, 4"H backsplash, 4" OC deck mount faucet holes, 18/304 stainless steel top, stainless steel legs & bracing, adjustable high impact corrosion resistant feet, NSF scratches & rbs - no significant damage - see photo details

294 - BK Resources BKIB-CP7-2412-18S - Ice Bin BK Resources BKIB-CP7-2412-18S, Stainless Steel Ice Bin w/ 7-circuit Cold Plate 24"Wx18"D This under bar ice bin has a 7-circuit cold plate made of aluminum. The ice bin is 12-9/16" deep with a 66 lb capacity. 18ga/T-304 stainless steel construction with stainless steel legs and side bracing, it also has adjustable corrosion resistant feet. It has a 4" backsplash with a 1" NPS drain with drain plug, includes sliding bin cover and is NSF listed. The standard height is 32-1/2". no lid - make your own - see photos for details

295 - BK Resource BKUB-LD18-21S -Underbar Liquor Display BK Resources, BKUB-LD18-21S, Underbar Liquor Bottle Display Unit - 18"W x 21 1/4"D x 32-1/2" H - (4) step with guard rail - approximately (20) bottle capacity - 18/304 stainless steel construction - NSF no leg set included small scratch & rub marks only - see photos for detail

296 - BK Resources BKS6-3-1824-14-18TS - 3 Comp Sink BK Resources, BKS6-3-1824-14-18TS, Sink, three compartment, 93-1/4"W x 29-1/2"D x 44-1/16"H overall size, 18" wide x 24" front-to-back x 14" deep compartments, (2) left & right 18" drainboards, 10"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rounded front & side edges, includes basket drains, 16/304 stainless steel deck & bowls, NSF no leg set included possible small twist to left side of backsplash - neglibible - see photos

297 - BK Resources BKS-2-24-14-24T - 2 Compartment Sink BK Resources, BKS-2-24-14-24T, Sink, two compartment, 96"W x 29-13/16"D x 43-3/4"H overall size, 24" wide x 24" front-to-back x 14" deep compartments, (2) left & right 24" drainboards, 9"H backsplash, 8" OC splash mount faucet holes, 1-1/2" rolled edges on front & sides, includes basket drains (BKDR-4), 18/304 stainless steel construction, NSF no leg set included ding on left side roll per photo - possible slight dip to right side drainboard / negligible - see photos

298 - BK Resources BKS-3-24-14-24T - 3 Compartment Sink BK Resources, BKS-3-24-14-24T, Sink, three compartment, 120"W x 29-13/16"D x 43-3/4"H overall size, 24" wide x 24" front-to-back x 14" deep compartments, (2) left & right 24" drainboards, 9"H backsplash, (2) sets of 8" OC splash mount faucet holes, 1-1/2" rolled front & side edges, includes basket drains (BKDR-4), 18/304 stainless steel construction, NSF no leg set included small dent front center roll - possible slight bow to back but really un-noticeable

299 - BK Resources 5" Gray Caster Wheel BK Resources, Hard Rubber Gray 5" Caster Wheel - 1 1/8" wide / 5/16" sleeve Total of (15) wheels in this group (15) Caster wheels total

300 - BK Resources 5" Gray Caster Wheel BK Resources, Hard Rubber Gray 5" Caster Wheel - 1 1/8" wide / 5/16" sleeve Total of (15) wheels in this group (15) Caster wheels total

301 - BK Resources 55BR-RA-GR-TLB - Locking Brake Wheel BK Resources, 5SBR-RA-PLY-PS4, Caster Kit, work table 5" diameter expanding stem, fits 1-5/8" OD tubing, non-marking polyurethane tread, top lock brake, 300 lb. capacity, resistant to acids & caustics, double ball bearing, operational temp range -45ø to 180ø F, zinc plated, POP box, NSF (4 per kit) > (7) total in this group Group of (7)

302 - BK Resources BKS-RES-20 - Sink Splash BK Resources, BKS-RES-20, Sink Splash, removable, stainless steel, to fit sinks with bowls measuring 20" front-to-back no noted issues with this lot

303 - BK Resources BK-DXTB2-2430 -24 x 30 Table Pedestal BK Resources, BK-DXTB2-2430, Table Base, 4-prongs, 24" x 30", 28-1/2" dining height, cast iron, (2) piece You get (2) pedestal sets for one bid

304 - BK Resources BKWS-1624 - Premium Shelf BK Resources, BKWS-1624, Premium Shelf, wall-mounted, 24"W x 16"D, 18/304 stainless steel, 1-1/2"H rear up-turn, (2) 11-1/2" angle supports, NSF small roll bend on front edge - easily straightenable - see photos

305 - BK Resources BK-URTR-36 - Urn Trough BK Resources, BK-URTR-36, Urn Trough with Drip Plate, 36"L, 7/8" deep tray, removable, 1" flush mount & 1/4" rounded corners trim plate, 1-1/4 " OD drain, 14/304 stainless steel, mounting hardware included see photos for condition

306 - BK Resources BKDWR-2015-ASSY-SS - Drawer Assembly BK Resources, BKDWR-2015-ASSY-SS, Drawer Assembly, 15"W x 20"D x 5"H pan size, 200 lb. capacity, self-closing, stainless steel assembly with stainless steel pan, fits 24"D, 30"D & 36"D metal or wood work tables, universal mounting kit included to attach to metal tables, ADA compliant, NSF see photos for condition

307 - BK Resources BKMS-1620-6 - Mop Sink Floor Mount BK Resources, BKMS-1620-6, Mop Sink, floor mount, 24-1/2"W x 19-3/8"D x 11"H overall size, 20" wide x 16" front-to-back x 6" deep bowl, 3-1/2" heavy duty brass basket drain (BKDR-HD4), (3) skirted sides, 18/304 stainless steel left & right backsplash bends easily straighenable - right side damage per photos

308 - BK Resources BK-LRG-STAINLESS-Pan Appears to be part of a drawer assy - 1/2 slider rails still affixed to side - inside pan dimensions 20" x 20" x 5" / outside dimensions 22 1/2" x 22 x 5" see photos for item condition

309 - BK Resources - Unmatched Shelves - Stainless (3) 22" x 89 1/2" stainless shelves - make your own shelf unit 3 Tiers high! Includes new leg set - 34" which could be cut down to any length you desire see photos for shelf conditions

310 - BK Resources - Unmatched Shelves - Galvanized (3) 22" x 89 1/2" galvanized shelves - make your own shelf unit 3 Tiers high! Includes new leg set - 34" which could be cut down to any length you desire see photos for shelf conditions

311 - BK Resources - Unmatched Shelves - Galvanized (3) 22" x 89 1/2" galvanized shelves - make your own shelf unit 3 Tiers high! Includes new leg set - 34" which could be cut down to any length you desire see photos for shelf conditions

312 - BK Resources BK-OSD-1860 Overshelf - Stainless BK Resources, BK-OSD-1860, Overshelf, table mount, 60"W x 18"D x 31-1/4"H, 18/304 stainless steel, NSF ding on corner - see photo for details

313 - BK Resources BKWS-1672 - Premium Shelf BK Resources, BKWS-1672, Premium Shelf, wall-mounted, 72"W x 16"D, 18/304 stainless steel, 1-1/2"H rear up-turn, (3) 11-1/2" angle supports, NSF ding to back edge per x - see photos for details

314 - BK Resources BKWS-1672 - Premium Shelf BK Resources, BKWS-1672, Premium Shelf, wall-mounted, 72"W x 16"D, 18/304 stainless steel, 1-1/2"H rear up-turn, (3) 11-1/2" angle supports, NSF ding to front per x - midway - believe it can be straighened - see photos for details

315 - BK Resources BKWSE-1696 - Economy Shelf BK Resources, BKWSE-1696, Economy Shelf, wall-mounted, 96"W x 16"D, 18/430 stainless steel, 1-1/2"H rear up-turn, (3) 11-1/2" angle supports, NSF ding down back edge x 3 - straightenable? - see photo for details

316 - BK Resources BKWSE-1696 - Economy Shelf BK Resources, BKWSE-1696, Economy Shelf, wall-mounted, 96"W x 16"D, 18/430 stainless steel, 1-1/2"H rear up-turn, (3) 11-1/2" angle supports, NSF ding down back edge x 3 - straightenable? - see photo for details

317 - BK Resources BKWS-1296 - Premium Shelf BK Resources, BKWS-1296, Premium Shelf, wall-mounted, 96"W x 12"D, 18/304 stainless steel, 1-1/2"H rear up-turn, (3) 8" angle supports, NSF slight bend midway down back edge - straightenable / see photos for detail

318 - BK Resources BK-OSS-1260 - Single Overshelf BK Resources, BK-OSS-1260, Single Overshelf, table mount, 60"W x 12"D x 18"H, 18/304 stainless steel, self tapping screws, shipped KD, NSF ding on edges per photos - look over photo set for clean description

319 - BK Resources BKCDT-48-L - Clean Dishtable BK Resources, BKCDT-48-L, Clean Dishtable, straight design, 48"W x 30-3/8"D x 46-1/4"H, right-to-left operation, 18/304 stainless steel top, 10"H backsplash, raised rolled edge on front & side, NSF no leg set included no noted damage / rust on leg sockets - see photos for details

320 - BK Resources BKCDT-48-R - Clean Dishtable BK Resources, BKCDT-48-R, Clean Dishtable, straight design, 48"W x 30-3/8"D x 46-1/4"H, left-to-right operation, 18/304 stainless steel top, 10"H backsplash, raised rolled edge on front & side, NSF no leg set included damage on right side roll per photo / rust on leg sockets - see photos for details

321 - BK Resources BKCDT-36-L - Clean Dishtable BK Resources, BKCDT-36-L, Clean Dishtable, straight design, 36"W x 30-3/8"D x 46-1/4"H, right-to-left operation, 18/304 stainless steel top, 10"H backsplash, raised rolled edge on front & side, NSF no leg set included dents per xxx on flat sides - possible slight twist to backsplash - see photos for detail

322 - BK Resources BKCDT-36-L - Clean Dishtable BK Resources, BKCDT-36-L, Clean Dishtable, straight design, 36"W x 30-3/8"D x 46-1/4"H, right-to-left operation, 18/304 stainless steel top, 10"H backsplash, raised rolled edge on front & side, NSF no leg set included right flare bend - bottom on right flat area bowed up - rust on leg sockets - see photos for detail

323 - BK Resources BKCDT-26-R - Clean Dishtable BK Resources, BKCDT-26-R, Clean Dishtable, straight design, 26"W x 30-3/8"D x 46-1/4"H, left-to-right operation, 18/304 stainless steel top, 10"H backsplash, raised rolled edge on front & side, NSF no leg set included bend on right backsplash - straightenable - see photos for details

324 - BK Resources VTTR-1848 - Work Table BK Resources, VTTR-1848, Work Table, 48"W x 18"D, 18/430 stainless steel top, with turndown edges on front & sides, reinforced with channels, 1-1/2" rear riser, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet, NSF top left edge bend per photos - overall condition pretty good per photo detail

325 - BK Resources BKWS-1260 - Premium Shelf BK Resources, BKWS-1260, Premium Shelf, wall-mounted, 60"W x 12"D, 18/304 stainless steel, 1-1/2"H rear up-turn, (2) 8" angle supports, NSF slight bend around a foot in from right - see photo for details

326 - BK Resources BKWSE-1648 - Economy Shelf BK Resources, BKWSE-1648, Economy Shelf, wall-mounted, 48"W x 16"D, 18/430 stainless steel, 1-1/2"H rear up-turn, (2) 11-1/2" angle supports, NSF top right significant bend on corner - possible straightenable - see photos for details

327 - BK Resources RSAA-24 - Multi-Angle Shelf BK Resources, RSAA-24, Multi-Angle Shelf, 24"W x 12"D, can be used as flat shelf or at 30ø angle with bottom lip, 18/304 stainless steel no notable damage - see photos for detail

328 - BK Resources BK-GT-40 - Grease Trap BK Resources, BK-GT-40, Grease Trap, 40 lbs. grease capacity, 20 gallons per minute, non-skid deck plate, removable baffles, no hub connections, includes T-Vent, main body suspended above floor, 11 gauge carbon steel construction with corrosion resistant coating missing lid - make your own - otherwise in good shape! See photos for details

329 - BK Resources - Unmatched Shelves - Galvanized (3) 16" x 23 1/2" galvanized shelves - make your own shelf unit 3 Tiers high! Includes new leg set - 34" which could be cut down to any length you desire see photos for detail of this group of shelving

330 - BK Resources - Unmatched Shelves - Galvanized/SS (1) 24" x 55 1/2" stainless shelf & (1) 24" x 55 1/2" galvanized shelf - make your own shelf unit 2 Tiers high! Includes new leg set - 34" which could be cut down to any length you desire see photos for detail of this group of shelving

331 - BK Resources BK-ICT - Condiment/Spice Rack BK Resources, BK-ICT, Condiment/Spice Rack, 18-1/2" x 6-7/8" x 3-7/8", hangs flat or angled, attaches to accessory APR-BAR, mounts on wall or pot rack, dishwasher safe, 18 gauge T304 stainless steel attaches to any BK Resources Pot Rack - NIB - Removed for photos only

332 - BK Resources BK-MLSC-B-V - Dining Side Chair (2) BK Resources BK-MLSC-B-V Dining Side Chair, ladder back, 18 gauge steel frame with black powder coated finish, nylon non-marking feet, vinyl Seat pads not included but can be purchased at kitchenrestock.com or similar company - available in both vinyl or wood product / BK-VPS-BK would be the part number for Black Vinyl - Grouping (2) Chairs - 33" tall no damage noted on this pair of chairs

333 - BK Resources BK-SURPLUS-EQUIP LEGS BK Resources - Misc salvage equipment legs - some excellent condition but many with rust, corrosion - you are buying the pallet lot Misc lot - 20" to 28" / rust & corrosion on some - 250 +/- total

334 - BK Resources BK-SURPLUS-EQUIP LEGS BK Resources - Galvanized Equipment Legs - 1 5/8" O.D. - 33 1/2" Long adjustable high impact corrosion resistant feet - Pallet lot Misc lot - 33 1/2" / rust & corrosion on some - 250 +/- total

335 - BK Resources BK-SURPLUS-EQUIP LEGS BK Resources - Galvanized Equipment Legs - 1 5/8" O.D. - 33 1/2" Long adjustable high impact corrosion resistant feet - Pallet lot Misc lot - 33 1/2" / rust & corrosion on some - 225 +/- total

336 - BK Resources BK-SURPLUS-EQUIP LEGS BK Resources - Galvanized Equipment Legs - 1 5/8" O.D. - 33 1/2" Long adjustable high impact corrosion resistant feet - Pallet lot Misc lot - 33 1/2" / rust & corrosion on some - 310 +/- total

337 - BK Resources BK-SURPLUS-EQUIP LEGS BK Resources - Galvanized Equipment Legs - 1 5/8" O.D. - 33 1/2" Long adjustable high impact corrosion resistant feet - Pallet lot Misc lot - 33 1/2" / rust & corrosion on some - 250 +/- total

338 - BK Resources BK-SURPLUS-EQUIP LEGS BK Resources - Galvanized Equipment Legs - 1 5/8" O.D. - 33 1/2" Long adjustable high impact corrosion resistant feet - Pallet lot Misc lot - 33 1/2" / rust & corrosion on some - 250 +/- total

339 - BK Resources BK-SURPLUS-EQUIP LEGS BK Resources - Galvanized Equipment Legs - 1 5/8" O.D. - 33 1/2" Long adjustable high impact corrosion resistant feet - Pallet lot Misc lot - 33 1/2" / rust & corrosion on some - 225 +/- total

340 - BK Resources BK-SURPLUS-EQUIP LEGS BK Resources - Galvanized Equipment Legs - 1 5/8" O.D. - 33 1/2" Long adjustable high impact corrosion resistant feet - Pallet lot Misc lot - 33 1/2" / rust & corrosion on some - 340 +/- total

341 - BK Resources BK-SURPLUS-EQUIP LEGS BK Resources - Galvanized Equipment Legs - 1 5/8" O.D. - 33 1/2" Long adjustable high impact corrosion resistant feet - Pallet lot Misc lot - 33 1/2" / rust & corrosion on some - 550 +/- total

342 - BK Resources BK-SURPLUS-BRACKETS/PARTS BK Resources - Galvanized Equipment Legs -Brackets - Containers - Misc Parts (Pallet lot) Misc lot of Stainless - Galvanized BK Resource Parts - See photos for detail

Auction Listings provided by AuctionZip.com. Although the information published herein is from sources deemed reliable, AuctionZip.com expressly disclaims any liability for errors, omissions or changes regarding any information provided for this auction. Potential buyers are urged to verify auction date, time, and content directly through the auctioneer's website or by contacting the auctioneer directly. The terms and conditions of the auction may or may not be published in this listing. ALL TERMS AND CONDITIONS AND OTHER ANNOUNCEMENTS MADE THE DAY OF THE AUCTION ARE BINDING AND TAKE PRECEDENCE OVER ANY INFORMATION FOUND HEREIN.