CLOSE
( E-Mail, User ID, or Auctioneer ID )
(Uncheck if using a shared computer)


Auction Information
Auctioneer Great Planes Trading Co. 3144977884
Auction Date May 25 Auction
Location
Comfort Suites Hotel
120 West 3rd Street
Bethlehem, PA
Time 04:30PM
Auctioneer's Other ListingsE-mail AuctioneerAuctioneer's Web Site
View Full Photo Gallery
  • Lot# 1 - Unusual Stanley #A6 aluminum fo

    Lot# 1 - Unusual Stanley #A6 aluminum fo

  • Lot# 2 - LEWIN UNIVERSAL plow plane in o

    Lot# 2 - LEWIN UNIVERSAL plow plane in o

  • Lot# 3 - Scarce Stanley #64 butcher bloc

    Lot# 3 - Scarce Stanley #64 butcher bloc

  • Lot# 4 - Stanley #10 carriagemaker’

    Lot# 4 - Stanley #10 carriagemaker’

Auction Listing
AuctionZip Auctioneer ID# 23005
An evening of antique tools and collectibles. PUBLIC AUCTION held in conjunction with the Early American Industries Association meeting. The auction is free and open to the public.

ONLINE BIDDING AVAILABLE - Click here for the full searchable catalog with images

CATALOG TEXT BELOW:
1 - Unusual Stanley #A6 aluminum fore plane Unusual Stanley #A6 aluminum fore plane, SW blade and chip breaker has light rust, most plating is gone from lever cap, body is very good to fine, very good overall.

2 - LEWIN UNIVERSAL plow plane in original wood box LEWIN UNIVERSAL plow plane in the original wooden box with six blades and the original owners manual, fitted wooden box has a sliding lid, fine overall.

3 - Scarce Stanley #64 butcher block plane Scarce Stanley #64 butcher block plane, V-logo blade has mild pitting on face, very good beech tote and knob, nice japanning, very good overall.

4 - Stanley #10 carriagemaker’s rabbet plane Stanley #10 carriagemaker’s rabbet plane, paint peeling in rear of bed, rosewood tote broken and glued, nice low knob, has a fine MADE IN ENGLAND blade, will make a very good user.

5 - METALLIC PLANE CO. 8-inch smooth plane METALLIC PLANE CO. 8-inch smooth plane with adjustable throat, CLOVER LEAF blade, very good overall.

6 - Stanley #40 1/2 jumbo scrub plane Stanley #40 1/2 jumbo scrub plane, fine SW-logo blade, nice beech tote and knob, very good overall.

7 - METALLIC PLANE CO. 9-inch smooth plane METALLIC PLANE CO. 9-inch smooth plane with adjustable throat, MOULSON BROTHERS blade, very good overall.

8 - Unusual iron plane with SANDUSKY TOOL CO. blade Unusual iron plane with SANDUSKY TOOL CO. blade, we believe this was used to trim up lead type, very good overall.

9 - METALLIC PLANE CO. 15-inch iron jack plane METALLIC PLANE CO. 15-inch iron jack plane with adjustable throat, tote spur is broken, good D.R. BARTON blade, has lever-operated blade adjuster, very good overall.

10 - Two ACME NO. 1 staplers Two ACME NO. 1 staplers one with decorative nickel-plated body, one later, both very good.

11 - ACME No 140 TACKER ACME No 140 TACKER, complete and very good overall.

12 - METALLIC PLANE CO. 20 1/2-inch iron fore plane METALLIC PLANE CO. 20 1/2-inch iron fore or jointer plane with adjustable throat, good EXCELSIOR blade, very good overall.

13 - Unusual K&H Block Conditioner by KEEN & HOTCHKISS Unusual K&H Block Conditioner PAT 8461, made by KEEN & HOTCHKISS, 721 N. Miami Ave, Miami, Fla. Made of cedar with mahogany stain.

14 - Large adjustable cant hook for rolling logs Large and early adjustable cant hook for rolling logs on the ground. The steel hook was blacksmith forged and has a pin on a small length of chain to secure it. Wooden handles measures 66 inches.

15 - Jackson Gorham patent combination saw Jackson Gorham patent combination saw. This is an early die-stamped saw with raised domed steel nuts. It has a 24-inch ruler etched into the top of the straight edge. It also has a 90 degree square with the saw plate meets the handle. It also has the original scribe in a hole in the top of the handle. The No. 29 was eventually taken over and produced in later years by Disston as one of there more economical combination saws. This model was made from 1856 - 1918.

16 - Manufactured cant hook marked on the steel end Manufactured cant hook marked on the steel end AMERICAN LOGGING TOOL COMPANY EVART, MICH, measures 54 inches long.

17 - J.K. KRIEG, N.Y. revolving cast-iron nail caddy J.K. KRIEG & CO. 39 WARREN ST. N.Y. revolving cast-iron nail caddy, very good overall.

18 - Pair of decorative Stanley #3 trammel points Pair of decorative Stanley #3 trammel points on wooden beam, very good overall.

19 - E. PRESTON & SONS 12" boxwood & brass rule & level E. PRESTON & SONS 12-inch boxwood & brass combined 12-inch rule with plumb and level, comes with original leather case.

20 - Pair of user-made brass trammel points 6" tall Pair of user-made brass trammel points 6-inches tall overall including the 2-inch steel points, they come on a small wooden beam, very good overall.

21 - Five assorted cigar box hammer Five assorted cigar box hammer including two from PA: J.C. Winter & CO. INC. RED LION, PA, MANUEL CIGARS “THEY”RE GOOD”; CHARLES DENBY CIGARS 5-CENT, LA FENDRICH CIGARS 5-CENTS; Wm. PENN 10C CIGARS, P&O CO., PHILA, MAKERS; MASON EHERMAN & CO. CIGARS TOB. PIPES, with bottle opener; and an UP TO DATE S.E. CIGAR CO. with hatchet, hammer and bottle opener, all very good.

22 - Pair of tailor tools: Lufkin #8152 curved rule Pair of tailor tools: Lufkin #8152 curved 24 1/2-inch rule has remnants of some Scotch tape that was used to ID it; and a square marked E. ELLSWORTH PALMER, COPYRIGHT 1888, very good.

23 - WOODWARD’S ANGLE FOOD TAFFY nickel plated hatchet WOODWARD’S ANGLE FOOD TAFFY nickel plated hatchet and hammer combination tool, fine.

24 - Two tailor’s squares Two tailor’s squares: HOOPER & HARRISON SYDNEY with beveled edge, brass bracket in the corner and brass ends, very good; and a smaller J. RABONE BIRMINGHAM with brass corner, very good.

25 - 48" log scale has paper label marked MAINE LOG Unusual 48-inch log scale has paper label marked MAINE LOG IMPROVED RULE FOR ?? V. FABIAN’S SON SOIE? JCT. ME, there is a hole thru the label that cuts off part of it, very good overall.

26 - Davis Level & Tool Co. 6-inch Patent inclinometer Davis Level & Tool Co. 6-inch Patent inclinometer level, SEPT. 17, 1867, has a washer under the screw that secures the point, and a dry vial. a good restoration project.

27 - Stanley #240, 4-foot sliding inside measure Stanley #240, 4-foot sliding inside measure, very good overall.

28 - PETE CALLEN MILWAUKEE skew bladed panel plane Contemporary PETE CALLEN MILWAUKEE 8 5/8-inch skew bladed panel plane with wooden depth stop, little if ever used, fine condition.

29 - Starrett No. 98Z 12-inch machinist level Starrett No. 98Z 12-inch machinist level with all three vials intact, nice mat black finish, rotating vial cover on main vial, a fine level in a fine wooden box that comes inside the original Starrett pasteboard box and has an original label.

30 - Lie-Nielsen No. 1 smooth plane made of white bronz Lie-Nielsen No. 1 smooth plane made of white bronze, was made to commemorate the 75th Anniversary of WOODCRAFT, complete and fine.

31 - PETE CALLEN MILWAUKEE 5 7/8" spill plane Contemporary PETE CALLEN MILWAUKEE 5 7/8-inch spill plane made of dark tropical hardwood, like new condition.

32 - 4 wooden paddle-like objects, likely for kitchen Four wooden paddle-like objects we suspect were used in the kitchen.

33 - Lot: pair of trammel points and folding square Lot: pair of trammel points and a small folding square with unusual graduations marked ASTON & MANDER MAKERS 25 OLD COMPTON ST. SOHO LONDON, very good. This firm were makers of scientific instruments, one leg is 6-inches and one is 5 1/2.

34 - Large user made mahogany bevel Large user made mahogany bevel, very good overall length is 20 1/2-inches and the blade is 14 1/2-inches.

35 - Lot: Stanley trammel points and a tallow holder Lot: Pair of Stanley trammel points and a small 2-piece wax or tallow holder that has knurling around the top and bottom edge.

36 - Set of five transportation-related rubber stamps Set of five transportation-related rubber stamps: Pullman, TWA Transport Plane, Motor Ferry "Kalakala", S. S. Normandie, and Lincoln Zephyr.

37 - Pair of corkscrews including one marked WILLIAMSON Pair of corkscrews including one marked WILLIAMSON and one that is made of two pieces that come apart for storage.

38 - 4-lb. C.J. KUKER SEATTLE surveyor’s plumb bob Large 4-lb. C.J. KUKER SEATTLE surveyor’s style plumb bob, very good overall.

39 - Pair of English spirit levels: one a Wm MARPLES Pair of English spirit levels: Wm MARPLES 10-in. ebony & brass with brass side views, very good overall; and a 12-inch with cracking on one side near level vial, good overall.

40 - Large roughly 4-lb. brass plumb bob Large roughly 4-lb. common-sense type brass plumb bob with hex nut top, steel point is also removed with hex wrench, marked BILLY in script and stamped WW, very good overall.

41 - MELICK CLINOMETER CO. cast iron inclinometer level Scarce MELICK CLINOMETER CO. cast iron inclinometer level

42 - Brass millwright’s-style reversible brass plumb bb Large brass millwright’s-style reversible brass plumb bob, roughly 3 1/2 pounds, very good overall.

43 - Stanley BEDROCK 602 FT smooth plane Stanley BEDROCK 602 FT smooth plane with very good early SW logo blade, fine rosewood tote and tall knob, fine overall.

44 - EDWARD HELB COMBINED LEVEL & GRADE FINDER RAILROAD EDWARD HELB COMBINED LEVEL AND GRADE FINDER RAILROAD, YORK, PA, PAT. No. 764,809, JULY 12, 1904; has two glass vial covers that are cracked, nice mahogany stock with brass corners, very good overall. o

45 - DAVIS L&T CO. No. 39 cast iron machinist level DAVIS L&T CO. No. 39 cast iron machinist level with brass top plate marked with maker’s name and model number, sides have gold painted highlights, very good overall.

46 - Unusual Millers Falls No. 1408 sliding bevel Unusual Millers Falls No. 1408 sliding bevel, a few spots of light rust, will clean to fine overall.

47 - Birmingham transitional smooth plane Birmingham transitional smooth plane, some light rust to exposed surfaces, good overall.

48 - Brass trammel points with pierced heart decor Pair of brass trammel points with pierced heart decorations on both sides, very good to fine overall.

49 - Metallic Plane Company 8-inch iron smooth plane Nice Metallic Plane Company 8-inch iron smooth plane with adjustable throat, complete and very good.

50 - Stanley #112 scraper plane with fine rosewood tote Stanley #112 scraper plane with fine rosewood tote and knob, good SW-logo blade, 90 percent plus japanning, light rust to exposed surfaces, will clean to fine overall.

51 - SANDUSKY grasshopper weather stripping plane SANDUSKY grasshopper weather stripping plane, complete and very good.

52 - RECORD No. 043 light duty plow plane RECORD No. 043 light duty plow plane, with intact depth stop, very good overall.

53 - Stanley #239 weather stripping plow plane Stanley #239 weather stripping plow plane, no provision for arms, nice 1/8-inch blade has patent date on one side, very good overall.

54 - Nice Windsor beader with JUNE 2, 1885 patent date Nice Windsor beader with JUNE 2, 1885 patent date on top of wooden frame, brass blade holder and brass fence, very good overall.

55 - Scarce Stanley #69 hand beader with set of blades Scarce Stanley #69 hand beader with set of replacement blades that come in a small envelope, beader has 90 percent plus nickel (is peeling on one side), nice ferrule, good wood, very good overall.

56 - NORVELL-SHAPLEIGH H’D’W ST. LOUIS Sharpening Stone NORVELL-SHAPLEIGH H’D’W CO ST. LOUIS, MO. Diamond Edge Tool (sharpening) Stone, in original pasteboard box with label on inside, very good overall.

57 - J.H. HALL NASHUE N.H. double ended shoot plane J.H. HALL NASHUE N.H. double ended shoot or chute board plane, complete and very good.

58 - Stanley #96 blind nail plane with STANLEY Stanley #96 blind nail plane with STANLEY on one side and PAT AP’L 10-88 on other side currently has a DEFIANCE by STANLEY No. 1251 chisel installed.

59 - Archimedes drill with small brass cask of bits Small Archimedes drill with small brass cask of bits, very good overall.

60 - Stanley #193 fiber board beveling plane Stanley #193 fiber board beveling plane, with five attachments, rods and original box of blades, very good overall.

61 - Unusual iron plane with wooden handles Unusual iron plane with wooden handles likely used the shoe industry, has adjustable fence on side, very good overall.

62 - Stanley #62 low angle bench plane Stanley #62 low angle bench plane, nice rosewood tote and knob, very good STANLEY blade, good japanning, very good overall.

63 - Patented auger bit handle APRIL 22, ’68 Patented auger bit handle APRIL 22, ’68, date hard to read, nice wood.

64 - Sandusky Tool Co. No. 133 rosewood plow plow plane Sandusky Tool Co. No. 133 handled rosewood plow plane with boxwood arms, plane is very good and comes with set of six plow irons, complete and very good overall.

65 - Lot of 13 pinch dogs some marked Wm JOHNSON NEWARK Lot of 13 assorted pinch dogs some marked Wm JOHNSON NEWARK, all very good.

66 - GORHAM 12-inch STERLING silver zig zag rule Unusual GORHAM 12-inch STERLING silver zig zag rule with hallmark of lion, anchor and letter G on back, fine overall.

67 - Nice ebony spokeshave with cast steel blade Nice ebony spokeshave with cast steel blade, very good overall.

68 - STEARNS No. 50 4-fold ivory & German silver rule Scarce E.C. STEARNS No. 50 4-fold ivory and German silver rule, makers name a bit faint, some yellowing, very good overall.

69 - 12-inch bevel edged drafting straight edge Very good 12-inch bevel edged drafting straight edge.

70 - NICE Core-box plane with 8 irons and 7 bottoms NICE Core-box plane with 8 irons and 7 bottoms that according to the tag on it was made by “my father, Jacob M. Baader (Bill Sr.’s father) of Springfield Ohio, who was a pattern maker in Springfield Ohio 1928. The back side of the tag says “The Scraping work on the side of the plane was done by Frank Zuker who worked for the O.S. Kelly Co. of Springfield, Ohio, complete and very good. Included is the core that the body was cast from. This solves the mystery of where all the models of this particular model of core box planes was made. Comes wired to a board that can be hung as a display.

71 - Unknown make 6-inch 2-fold ivory or bone rule Unknown make 6-inch 2-fold ivory or bone rule with brass joint and brass ends, numbers somewhat faint.

72 - Unusual ebony and brass bow drill (no bow) Unusual ebony and brass bow drill, we do not have a bow for it, very good overall.

73 - Small 7-inch ebony 3/8-inch round plane Small 7-inch ebony 3/8-inch round plane, appears to be professionally made, fine overall.

74 - Keuffel & Esser No. 5090A surveyor’s level Keuffel & Esser No. 5090A surveyor’s level in oak box with original leg set, and table, table comes in a canvas bag with zippered top, instrument comes in nice box with canvas strap. A nice setup for the builder or civil engineer.

75 - Stanley 150th Commemorative mallet and chisels set Stanley 150th Commemorative mallet and chisels set #381 purchased during the convention that was held at the Stanley Plant in New Britain in 1993. This set was never used, like new.

76 - Starrett No. 99-F transit or builders level IOB Starrett No. 99-F transit or builders level, in original finger jointed box, with brass plumb bob and having a nice set of adjustable steel legs.

77 - Stanley #35 transitional plane, 150th Anniversary Stanley #35 transitional plane that was refurbished by the Stanley Plant and sold at the 150th Anniversary Convention in 1993 as #0229 of 2000, box has crease on top but is otherwise fine.

78 - CHAUNCEY WING’S SONS mailer, by Don Wing's family CHAUNCEY WING’S SONS mailer, manufactured by Don Wing’s family. Don was the third or fourth generation of his family to run the business of making these mailers and the company continues as far as we know. We have seen ads online where they offer to buy and refurbish old mailers like this one and offer them for resale.

79 - Keuffel & Esser transit level in original box Keuffel & Esser transit level in original mahogany box, nice set of K&E legs, very good overall.

80 - Berger VERSA-TILT TRANSIT LEVEL Model 117 Berger VERSA-TILT TRANSIT LEVEL Model 117, complete with mahogany box and nice set of legs.

81 - Two Keuffel & Esser hand levels Two Keuffel & Esser hand levels; a square one with tan leather case, case has hole in bottom so the level could be pushed up from the bottom, flap of case almost torn completely off instrument itself is very good; and one round No. 5702 level with green leather case, very good.

82 - Keuffel & Esser (K&E) folding tripod for surveying Keuffel & Esser (K&E) folding tripod for surveying instruments inside a round cardboard tube with OD green paint with tin bottom and screw-off tin lid. Very nice.

83 - Keuffel & Esser Stadia Hand Transit Keuffel & Esser Stadia Hand Transit, PAT NOV.15.10 marked on side of tube, the brown leather case is missing the flap, a very good instrument in a decent case.

84 - Nice cornice plane with a round dowel passed thru Nice cornice plane with a round dowel passed thru the front end and leather strap for the apprentice to pull with, the handle is loose in the mortise and will need to be re-glued, marked on toe G.B. ATTICKS a fine plane overall.

85 - Pair of slide rules: PICKET & ECKEL Copyright 1959 Pair of slide rules: PICKET & ECKEL Copyright 1959 Patent Applied For, like new in nice PICKET leather case with B. CARTER name in ink on inside of flap; and a Picket Model 902 SIMPLEX-TRIG that is very good in an ill fitting K&E No. 4058W case.

86 - Pair of ACME desktop staplers Pair of ACME desktop staplers; one nickel plated that is complete and very good; and one japanned that is also very good.

87 - Keuffel & Esser Co. NY ENG. DEPT. 1905 hand level Keuffel & Esser Co. N.Y. ENG. DEPT. 1905 hand level with K&E leather case that can be worn on belt, back of case marked R.W.V. City Engr’s Office Canton, O. U.S.A., very good.

88 - Three smaller slide rules Three smaller slide rules: (top to bottom) PICKET N 200-ES TRIG, very good in very good Picket leather case (black); KEUFFEL & ESSER PAT. JUNE 5, 1900, very good, in original brown leather case with moderate wear; and one marked Mauerstarke that is probably Swiss or German, the rule is fine; comes in a 2-piece box that shows moderate wear.

89 - Two staplers Two staplers: HOTCHKISS STAPL-ON, very good; and a BOSTITCH with HEAD NO. 69, complete and very good.

90 - Three slide rules Three slide rules: KEUFFEL & ESSER DECI-LON 68 1130, Copyright 1947, 1961, fine condition with nice original leather case; CONCISE NO. 28N JAPAN circular model with original case; and an INDECO RULE with leather case, very good.

91 - SANTA FE Railroad marked adz, needs handle SANTA FE Railroad marked adz, needs handle, very good; an unmarked fore that also needs a handle.

92 - KEUFFEL & ESSER STADIA 4101 slide rule KEUFFEL & ESSER STADIA 4101 slide rule, Pat. 1,934,232 Patented by A.W. KEUFFEL Nov. 7, 1933; N<4101>, a fine rule, the box has had the bottom broken out, a very good rule in a box that needs some attention.

93 - Pair of ACME NO. 1 staplers Pair of ACME NO. 1 staplers with table and adjustable stop, most of the original nickel is missing from the head, very good overall; the other is missing the table but has good nickel plating on

94 - A.H. REID Patent bit-stock A.H. REID Patent (U.S. No. 268,938) bit-stock, nice wood and fine nickel plating, very good overall.

95 - Rosewood spokeshave with screw-operated blade Rosewood spokeshave with screw-operated blade, very good overall.

96 - I WAIN (Lancaster PA) complex sash molding plane I WAIN (Lancaster PA) complex sash molding plane, complete and fine.

97 - British 19th Century Fusee Clock Movement British 19th Century Fusee Clock Movement for parts.

98 - Keen Kutter Catalog U 1930 Keen Kutter Catalog U 1930, paper covers have a few creases, very good overall.

99 - BELKNAP HARDWARE & MFG. CO. Catalog No. 100 BELKNAP HARDWARE & MFG. CO. Catalog No. 100, complete and very good.

100 - Nice Stanley #72 chamfer plane, fine blade Nice Stanley #72 chamfer plane, fine unmarked blade, fine rosewood tote and knob, a few spots of light surface rust, will clean to fine overall.

101 - Stanley BEDROCK #603 smooth plane Stanley BEDROCK #603 smooth plane, fine rosewood tote and tall knob, good BB-logo blade, some light surface rust, will easily clean to fine overall.

102 - Watch Lathe, Boley & Leinen, with motor Watch Lathe, Boley and Leinen, with motor and countershaft With indexing wheel, flip-down tool rest, micrometer tailstock, on user-made wooden stand, fine overall.

103 - Four watch and clock books Four watch and clock books: Watch and Clockmakers Handbook, F.J. Britten, 1938; Practical Clock Repairing, DeCarle 1966; Clock and Watch Escapements, Gazely 1980; and Modern Clocks, their Design and Maintenance, Robinson 1942. All are very good.

104 - Rare X-Y table for watch lathe Rare X-Y table for watch lathe (unmarked, but likely Boley) Rare accessory, fine.

105 - Clockmaker lathe basics, John Tope, Booklet & DVD Clockmaker lathe basics, John Tope, Booklet and 4 DVD

106 - Rare Boley milling column for watch lathe Boley milling column for watch lathe. Even rarer accessory than the X-Y table, fine overall.

107 - Lot of clock tool books Lot of clock tool books: Six Lindsay Press metalworking reprints; The Watchmaker's Lathe, Goodrich 1974; and Machine Tool Operation, Burghardt 1936

108 - Six-Jaw bezel chuck for watch lathe Six-Jaw bezel chuck for watch lathe.

109 - Offset chuck for watch lathe 3-jaw chuck Offset chuck for watch lathe 3-jaw chuck with centering pin, fine overall

110 - Five clock and watch books Five clock and watch books: Clock wheel and Pinion Cutting, Malcom Wild 1983; Staking Tools and How to Use Them, reprint of 1910 booklet; Clockmaking for the Home Shop Machinist, Guy Lautard 1997; Building an America Clock Movement, Steven Conover, 1994; and Clock-Cleaning and Repairing by Bernard E. Jones, 1968 edition with spine that is peeling from the bottom and has some moisture wrinkling of the first several pages.

111 - Union Machinists-type oak chest with original tag Union Machinists-type oak chest with original tag and keys, a few scuffs and scratches but very good overall.

112 - Assorted tools used in watch or clock making Assorted tools used in watch or clock making: Goodell-Pratt 4" Combination Square with center finder; Lufkin 6" combination square with Center finder; Clock spring retainer rings, set of three in a cigar tin; Set of Bergeon cutting broaches (no 42-80); Set of Bergeon smoothing broaches (nos. 28-70); and ten various watch gear and pinion cutters.

113 - Lot of machine tool books etc. Lot of machine tool books etc.: Machine Tool Work, 1932; Drafting for the Machine Trades, vols. 1-3, 1942; and Blueprint Reading for the Building Trades, 1929; reprint of a Hammacher Schlemmer & Co. Catalog No. 142 reprinted by Martin J. Donnelly Antique Tools; and Gas Welding And Cutting by Ernest E. Thum, 1928.

114 - Lot of machinist tools used in clockmaking Lot of machinist tools that were used in clockmaking: B&S 4" steel square; Starrett pin vise; Starrett dial indicator; B&S wire gage; and a Starrett speed indicator; and a unmarked protractor head for combination square.

115 - Assorted clock and watch tools Assorted clock and watch tools: Box of assorted broaches and pillar files; two clockmakers pivot hooks; Set of clockmaker's cutting broaches, 2.2-6.0mm; and a Vallorbe double-ended pivot burnisher; and set of 14 gravers for watch work unmarked, probably Swiss.

116 - Assorted watch and clock tools Assorted watch and clock tools

117 - More assorted machine tools used in clock work More assorted machine tools used in watch or clock work: Two Starrett thread gages, normal and Whitworth; Starrett 2-12" engineers square; Starrett #13 setup blade, hex/octagon; B&S 6" rule, English/Metric; and various small calipers and dividers; Nicholson file card and a ballpeen hammer.

118 - Assorted watch and clock tools Assorted watch and clock tools: blade holder for clockmaker's lathe XY table; clockmaker's Staking set, anvil, with 16 stakes Modern, in wooden block; various small pliers and cutters; and a patented jeweler's drill sharpening set for size 61-80 drills, in tin box with all accessories

119 - Assorted watch and clock tools Assorted watch and clock tools: pinion wire cutter; pivot burnisher, rosewood handle; Clock movement stand with large, small, and circular jaws;

120 - Watch lathe WW collets: 30 wire collets, 5 bezel Watch lathe WW collets: 30 wire collets, 5 bezel collets In cherry box

121 - Traditional wooden watchmaker's bench Traditional wooden watchmaker's bench, with 18 drawers, very good overall.

122 - STANLEY RULE 24", 2-fold No. 31 1/2 shrinkage rule STANLEY RULE & LEVEL CO. 24-inch, 2-fold No. 31 1/2 shrinkage rule 1/8 IN PER FT., complete and fine.

123 - BRUNING No. N4843 PLANIMETER IOB BRUNING No. N4843 PLANIMETER in original pasteboard box, complete and very good overall.

124 - STANLEY RULE 24", 2-fold No. 31 1/2 shrinkage rule STANLEY RULE & LEVEL CO. 24-inch, 2-fold No. 31 1/2 shrinkage rule 3/16 IN PER FT., complete and fine.

125 - Milk can from Mayview State (Psychiatric) Hospital Unusual milk or cream can from the Mayview State (Psychiatric) Hospital (originally the Marshalsea Poor Farm) a 335 acre complex on a bluff in South Payette Township, Bridgeville, Pennsylvania. In the early days, the hospital farm produced 60 percent of the food that was consumed by the complex. This can is from that time period. It is in red paint and is very good.

126 - STANLEY RULE No 15 brass-bound 24" rule STANLEY RULE & LEVEL CO. No 15 brass-bound 24-inch 2-fold rule, with early arched joint and brass slide, very good overall.

127 - Winchester #3015 iron fore plane Winchester #3015 iron fore plane, light rust to exposed surfaces, will clean to fine overall.

128 - STANLEY RULE & LEVEL No. 1, 24-inch 2-fold rule STANLEY RULE & LEVEL CO. No. 1, 24-inch 2-fold WARRANTED BOX WOOD rule with early-style arched joint, complete and fine.

129 - LEONARD BAILEY iron jack plane LEONARD BAILEY iron jack plane with nickel plated tote and knob, some light rust, will clean to very good overall.

130 - KEEN KUTTER K360 1/2, 12-inch folding caliper rule KEEN KUTTER K360 1/2, 12-inch folding caliper rule, complete and very good.

131 - Folding Sawing Machine Company drag saw Folding Sawing Machine Company hand-powered drag saw complete with most of the original red paint job, and 70 percent plus original paper label, a fine overall example. This is right at 7-feet long, so bring a truck or trailer if you intend to buy it.

132 - UPSON NUT CO. No. 36 1/2 12" folding caliper rule UPSON NUT CO. No. 36 1/2 12-inch folding caliper rule, the caliper is very stiff, we could only get it to come out about 1/4 of an inch to tie the tag on, it will need to be worked on to loosen it up, complete and very good.

133 - BRIDGE CITY TOOL WORKS Limited Ed. Shoulder Plane BRIDGE CITY TOOL WORKS HP-7 Limited Edition Signature Series Shoulder Plane, complete and fine in original box with Owners Manual and certificate.

134 - PETE CALLEN MILWAUKEE 8 3/4"skew blade panel plane Contemporary PETE CALLEN MILWAUKEE 8 3/4-inch skew bladed panel plane with two fences, made of dark tropical hardwood, fine overall.

135 - Scarce BRIDGE CITY TOOL Variable Pitch bench plane Scarce BRIDGE CITY TOOL CO. VP60 Variable Pitch bench plane, in original wooden box with original owners manual, this plane original retailed for $1519 and has been out of production for several years. Bronze sides are dovetailed to the steel sole. This is number 209 of the 400 that were produced. This example is like new with a very good box.

136 - Nice German concertina in original box Nice German concertina in original box, intact bellows just needs new neck strap and someone to play it. Comes with a few sheets of music and a booklet Henry Silberhorn’s INSTRUCTOR FOR THE CONCERTINA, very good.

137 - Decorative HOTCHKISS No. 2 stapler Decorative HOTCHKISS No. 2 stapler, complete and very good.

138 - Four hollow and round GABRIEL molding planes Four hollow and round GABRIEL molding planes.

139 - New York Tool Co. 16-inch wooden gutter plane New York Tool Co. 16-inch wooden gutter plane, very good.

140 - Pair of Wm. MOSS wooden molding planes Pair of Wm. MOSS wooden molding planes including a sash.

141 - Five GABRIEL LONDON hollow and round planes Five GABRIEL LONDON hollow and round molding planes.

142 - Nicely made wooden spill plane with feet Nicely made wooden spill plane with feet, very good.

143 - Three GABRIEL LONDON molding planes Three GABRIEL LONDON molding planes including two rounds and a boxed side bead, all very good.

144 - BLESS & DRAKE SALAMANDER BOX IRON BLESS & DRAKE SALAMANDER BOX IRON with intact wooden handle and having the proper slug inside, some paint splatters on wooden handle, the top left corner of the box is chipped, good overall.

145 - Lee’s Corn Cutter and Creamer IOB Lee’s Corn Cutter and Creamer in original albeit tatty pasteboard box, the cutter itself is like new, fine.

146 - Myers Patent miniature sad iron Myers Patent (U.S. No. 539,700) miniature sad iron with quick-release handle on a nickel plated OBER stand with spare slug for a different iron. The front portion of the quick-release lever is broken off of the Myers iron.

147 - Mini Shimer Patent sad iron Mini Shimer Patent sad iron with quick-release handle, made on U.S. Patent issued May 9, 1983 to Milton Shimer of Freemansburg, Pennsylvania, very good overall.

148 - Two copies of The Brace by Eric M. Peterson Two copies of The Brace: The Why & How of Making Holes by Eric M. Peterson; one is a Pre-release version inscribed For Bill Baader Eric M. Peterson; and the other is one of those produced by Peterson and sent out to MWTCA members along with one of the special publications several years ago. Both are in their original jewel cases.

149 - Large brass surveyor’s-type plumb bob Large brass surveyor’s-type plumb bob with removable top and steel tip, has typical nicks and dings, very good overall.

150 - Bailey VICTOR 8" smooth plane, iron tote & knob Bailey VICTOR 8-inch smooth plane with iron tote and knob, has a few spots of light rust, a B-PLANE iron with OCT 22 1889 patent date, leading edge of lever cap is chipped, will easily clean to very good condition.

151 - Unusual 27-oz. brass plumb bob Unusual 27-oz. brass plumb bob with blunted steel point and having a band of knurling around the top and around the middle of the body, very good.

152 - Scarce DAVIS LEVEL & TOOL CO. iron block plane Scarce DAVIS LEVEL & TOOL CO. iron block plane, good unmarked blade, needs light cleaning, very good overall.

153 - Turnip-shaped 2 1/2-lb. brass plumb bob Turnip-shaped 2 1/2-lb. brass plumb bob with removable top and having a small steel point, very good.

154 - Patternmaker’s plane made from BEDROCK #605 Unusual patternmaker’s plane made out of a Stanley BEDROCK #605 iron jack plane, comes with seven different wooden bottoms each with a different radius and four corresponding Q-logo blades each stamped with the number that corresponds to the number of the bottom it matches, the plane has some rust, will clean to very good overall.

155 - Keuffel & Esser 6487 brass plumb bob Keuffel & Esser 6487 brass plumb bob with internal reel, has pitted steel point, good overall.

156 - Decorative cast iron stove pipe floor vent Decorative cast iron stove pipe floor vent, has a rotating inner ring that could be opened in the summer to allow cooler air from the basement through to the upper floor, very good.

157 - Brass 40-oz. reversible plumb bob Brass 40-oz. reversible plumb bob with steel point and shaft, removable top, very good overall.

158 - Unknown brass plumb bob? that has three legs Unknown brass plumb bob? that has three legs at one end, a countersunk hole in the other end, it came with a collection of plumb bobs but we have never seen anything like it.

159 - Lot of three oil cans Lot of three oil cans; one in red paint with pump; and two smaller pocket types; one is a Chase Patent.

160 - Fine set of six D.R. BARTON lathe turning tools Fine set of six D.R. BARTON lathe turning tools. Ex Bill Baader collection.

161 - Fillister bed for Stanley Millers Pat. plow plane Fillister bed for Stanley Millers Patent plow planes, comes with two mounting screws, intact blade, the nicker is worn down and should be replaced, fine overall.

162 - 10 D.R. BARTON carving gouges in a fitted box Stunning set of 10 D.R. BARTON carving gouges in a fitted wooden box; from left to right are No. 32; 20; 31; 29; 17; 25; 20; 20; 20; and 20. All are in fine usable condition. Ex Bill Baader collection.

163 - ACME 28-inch plumb, level & inclinometer level ACME 28-inch plumb, level & inclinometer level, both vials intact, very good overall.

164 - ACRON ECLIPSE 28" brass-bound mahogany level Fine ACRON ECLIPSE 28-inch brass-bound mahogany plumb and level, Patented 12-20-04 and made by the BAKER MC MILLEN CO. Akron, Ohio, both vials intact. Has former owner B.H. WARNER’s name stamped twice into both sides, top and bottom.

165 - D.M. LYON & CLEARMAN 28" mahogany and brass level D.M. LYON & CLEARMAN 28-inch mahogany and brass plumb & level, both vials intact, has large brass side views, few typical nicks and dings, letter W or M is cut into the top of the frame, very good overall.

166 - Unknown make 28" mahogany plumb & level Unknown make 28-inch mahogany plumb & level with large brass plates on side covering plumb vials, one of the end vials is dry, the other two are intact, very good overall.

167 - Unmarked folding tailor's square Unmarked folding tailor's square with brass joint and brass bracket to hold it open, very good overall.

168 - Pair of wooden wedge-locking trammel points Pair of wooden wedge-locking trammel points, very good overall. Ex Bill Baader collection.

169 - Homemade panel gauge Homemade panel gauge with hand stamped numbers, very good overall. Ex Bill Baader collection.

170 - Mystery tool, possibly a veneer-cutting tool Mystery tool. The tag we found on it said it was a veneer-cutting tool. It has spring loaded wooden plungers on either side of the circular blade.

171 - Pair of wooden stair saws: one DISSTON & SONS Pair of wooden stair saws: one DISSTON & SONS, complete and fine; and another unknown make with plane-like front knob, chipped handle spur, very good.

172 - Keuffel & Esser surveyor or builders hand level Keuffel & Esser surveyor or builders hand level in original leather case that can be worn on a belt.

173 - BARTON hand adz, spokeshave, handled shave Lot: D.R. BARTON hand adz, very good; wooden spokeshave; and a E.C. ATKINS long handled shave with cam locking head.

174 - Millers Falls No. C590 torpedo level like new IOB Millers Falls No. C590 torpedo level like new in original box with intact label that is marked Gfld Mass, a fine to near new level in a very good box.

175 - SIMONDS SAWS, KNIVES, FILES, STEEL CATALOG No. 19 Original SIMONDS SAWS, KNIVES, FILES, STEEL CATALOG No. 19, complete with hard covers, 195 pages total, very good to fine.

176 - GURLEY Geologist Compass Forest Service Pattern W. & L.E. GURLEY Geologist Compass Forest Service Pattern, with veins, one wire needs, comes in a well-worn leather case

177 - Lot of assorted clock and watch tools Lot of assorted clock and watch tools: wheel layout tool watch lathe file rest, metric taps and drills; watch drill bits (antique) in original boxes, etc.

178 - SWISS-MADE Motor Speed Indicator,Sticht Co. NY SWISS-MADE Motor Speed Indicator Herman H. Sticht Co. Inc. New York, lens chipped at outer edge, very good overall.

179 - Keuffel & Esser abney level with leather K&E case Keuffel & Esser abney level with leather K&E case, a fine instrument in a good case.

180 - Lot of various clock making and repair materials Lot of various clock making and repair materials.

181 - Aqua Survey, Cincinnati, Ohio, Locator “Dip Meter” Aqua Survey and Instrument Co. Inc. Cincinnati, Ohio, Locator “Dip Meter” in original “TOP GRAIN COWHIDE” case with sheet of paper that was printed off the internet that describes the item in detail, very good.

182 - Lot of clock makers supplies & twist drills & taps Another lot of clock makers supplies; and a wooden box filled with used twist drills and taps.

183 - Keuffel & Esser brass alidade in original case Keuffel & Esser brass alidade in original albeit worn tan leather case, instrument has intact sighting veins.

184 - 2 books: TREEN WOODWARE & EUROPEAN TOOLS Two books: TREEN OR SMALL WOODWARE Throughout the Ages by Edward H. Pinto, some small tears in dust jacket, very good overall; and a paper covered EUROPEAN TOOLS From the 17th to the 19th Century by the Flint Institute of Arts, fine.

185 - Municipal Instrument Co. Berwyn, Ill dip meter IOB Municipal Instrument Co. Berwyn, Ill dip meter in original box, fine overall.

186 - David White Company Milwaukee Wisconsin compass David White Company Milwaukee Wisconsin compass in brown pasteboard box, very good.

187 - W. WILSON abney level London 1913 W. WILSON abney level London 1913 in brown leather case that has had the top separate, a good instrument in a case that needs repair.

188 - DAVIES BIRN, 12" boxwood 2-fold rule DAVIES BIRN, 12-inch boxwood 2-fold rule beveled on one long edge and graduated on other edge, has intact brass slide, arched joint, very good overall.

189 - WARREN-KNIGHT CO. PHILADELPHIA No. 140 compass WARREN-KNIGHT CO. PHILADELPHIA No. 140 compass with sighting veins, has threaded hole in base to mount on staff or tripod, very good overall.

190 - Fine K&E Pocket Transit IOB Fine K&E Pocket Transit (After Brunton) No. 80 0026 in original box with booklet or pamphlet.

191 - Dietzgen No. 663C Ruling Pen IOB & a pantograph Dietzgen No. 663C Ruling Pen in original box with metal cask holding one lead, fine; and a POST No. 1496 wooden pantograph.

192 - C.E. U.S. ARMY surveyors sights C.E. U.S. ARMY (Corps of Engineers) surveyors sights in fitted wooden box, each is marked MADE IN CANADA, partial label on inside of lid MONTREAL, very good set in nice fitted wood box.

193 - Pair of rules: Stanley #69 & unknown make No. 18 Pair of rules: Stanley #69 1-foot 4-fold boxwood rule, has small chip from one edge, very still joint, very good overall; and an unknown make No. 18, 2-foot 4-fold rule that is

194 - Keuffel & Esser No. 6299 surveyor’s rod level Keuffel & Esser No. 6299 surveyor’s rod level like new in a worn pasteboard box.

195 - Stanley BED ROCK No. 608 FT with good tall knob Stanley BED ROCK No. 608 FT with good tall knob, scuffed but intact tote, good T-logo blade, very good overall.

196 - Keuffel & Esser compact surveyor’s tripod Keuffel & Esser compact surveyor’s tripod in round cardboard box with tin lid, box is in military O.D. green paint, so it’s likely a former military piece, very good.

197 - BRIDGE CITY TOOL, 1 1/8" Foxtail Shoulder Plane BRIDGE CITY TOOL COMPANY CT-14, 1 1/8-inch Foxtail Shoulder Plane, Limited Edition 2006 Commemorative Tool Series, a fine original plane in original fitted box with Certificate of Authenticity and Owners Manual.

198 - BRIDGE CITY TOOL COMPANY 8 Piece Chisel Set BRIDGE CITY TOOL COMPANY Commemorative Tool #13 Eight Piece Chisel Set 1101-193. This set of 8 chisels, three of them cranked, plus a brass mallet, all having matching handles in the original box. A fine set overall.

199 - BRIDGE CITY TOOL Commemorative Bench Plane BRIDGE CITY TOOL COMPANY CT-10 Commemorative Tool Series Low Angle Bench Plane, this was 2002’s Commemorative Tool No. 10, It is a stuffed low angle bench plane with bronze sides dovetailed to a steel bottom, It is near new in original wooden box with certificate of authenticity, and

200 - Stanley #57 core box plane with one set of risers Stanley #57 core box plane with one set of risers, and intact crossbar and turnbuckle, fine tote and knob, a dusting of light surface rust, will clean to fine overall.

201 - Marked Stanley #85 1/2 rosewood panel gage Marked Stanley #85 1/2 rosewood panel gage, complete and fine.

202 - Stanley #140 skew bladed block plane Stanley #140 skew bladed block plane, nice RULE & LEVEL CO. blade, good rosewood knob, light dusting of surface rust, will clean to fine overall.

203 - Nice Stanley Millers Patent No. 41 plow plane Nice Stanley Millers Patent No. 41 plow plane (no fillister bed) good fence, owner’s initials RLH stamped over the MILLERS PATENT logo on the handle, no provision for rear depth stop or slitter, unslotted fence screws, and extra long top spur on handle make this an early model, very good overall.

204 - Chamberlain Marietta, OH combination plumb & kevel G. L. Chamberlain Marietta, OH combination plumb & level.

205 - Unmarked Metallica Plane 5 1/2" iron block plane Unmarked Metallica Plane Company 5 1/2-inch iron block plane with rosewood wedge, very good overall.

206 - Scarce MARSH M2 iron smooth plane Scarce MARSH M2 iron smooth plane (same size as a Stanley #2) has fine rosewood tote, rosewood knob has a little paint slopped on the base, nice original blade, with light cleaning, this one will be fine.

207 - LUFKIN CLEVELAND OHIO 24" 2-fold brass rule LUFKIN CLEVELAND OHIO 24-inch 2-fold brass rule, a nice early rule with worn markings, good overall. ex Bill Baader collection.

208 - Morris Patent iron plow plane with “scissor” fence Rare Morris Patent iron plow plane with “scissor” adjusting fence, has some rust here and there, fine original tote and wedge, will clean to very good to fine overall.

209 - 2 Star Tool Co. Springfield Ohio printers rules Pair of Star Tool Co. Springfield Ohio printers pica rules; one brass and one steel, both very good. ex Bill Baader collection.

210 - 4 Vol. set Knight’s American Mechanical Dictionary Four Volume set Knight’s American Mechanical Dictionary, all are fine.

211 - Pair of “lady-leg” calipers Pair of “lady-leg” calipers, very good.

212 - Pair of flat sided brass oil cans or oilers Pair of flat sided brass oil cans or oilers, both are very good.

213 - Round wooden bodied CHERRY SEEDER Round wooden bodied CHERRY SEEDER with faint inked logo on the side, it appears to have been made in Springfield Ohio and is most likely made the patent (U.S. No. 719,131) issued to Edwin Parker of Springfield, this one is very good.

214 - Collapsible drinking cup Collapsible drinking cup like those carried by cyclists, comes in a leather case marked R.W. CALKINS on the outside and HIAWATHA GRAIN CO. MINNEAPOLIS MINN on inside of leather case, cup has two folding handles, fine.

215 - RARE ebony & brass Rogers quill cutter & sharpener RARE ebony and brass Rogers quill cutter and sharpener marked ROGERS CUTLERS TO HER MAJESTY SHEFFIELD ENGLAND, fine overall.

216 - L.S. Starrett speed indicator in original box L.S. Starrett speed indicator in original box, fine overall.

217 - Blacksmith’s double caliper Blacksmith’s double caliper, complete and very good.

218 - Wedge-locking panel gage Wedge-locking panel gage, has splinter along edge that the wedge bears against, good overall.

219 - Early T-auger Early T-auger with what appears to be a number “5” stamped into the shaft, very good.

220 - Nice blacksmith-made ash shovel Nice blacksmith-made ash shovel folded and riveted at corners.

221 - 2 BENSEN & CRANNELL ALBANY tongue & groove planes Pair of BENSEN & CRANNELL ALBANY 1-inch handled tongue & groove planes, some light rust on blades, otherwise complete and very good.

222 - Three side bead planes Three side bead planes: KENNEDY & WHITE 5/8-inch, has a chunk of boxing missing from back end, still a very good user; Sandusky Tool Co. 1/4-inch complete and very good; and a Sandusky Tool Co. 3/16 with some moisture damage to toe end.

223 - Surgeon’s T-handled brace with Jacob’s chuck Surgeon’s T-handled brace with Jacob’s chuck, complete and fine.

224 - BENSEN & CRANNELL ALBANY moving fillister plane BENSEN & CRANNELL ALBANY moving fillister plane with screw-operated depth stop, a few spots of staining, fine overall.

225 - 2 CASEY & CO. AUBURN N.Y. #18 hollow & round plane Pair of CASEY & CO. AUBURN N.Y. No. 18 hollow & round planes, both very good.

226 - BALDWIN screw-adjusting sash plane BALDWIN screw-adjusting sash plane with brass plates in the side thru which the adjusters pass, very good overall.

227 - Stanley #57 core box plane with two sets of risers Stanley #57 core box plane with two sets of risers good beech tote and knob, intact turnbuckle and cross bar, good RULE & LEVEL CO. blade, very good overall.

228 - 3 BENSEN & CRANNELL ALBANY complex molding planes Three BENSEN & CRANNELL ALBANY complex molding planes; the widest is 2 3/4-inches wide and is marked 7/8 on heel; the other two are 1 1/2 inches wide and are marked 3/8 on heel; all are fine.

229 - Starrett 439-24 Builders Combination Tool Starrett 439-24 Builders Combination Tool head with protractor and all four level vials intact, just needs an 18-inch or 24-inch scale to be complete.

230 - 3 molding planes: one a D.R. BARTON & CO. complex Three molding planes: D.R. BARTON & CO. complex profile marked 4/8 on heel, very good; Unknown make 3/8-inch fully boxed side bead with some bug damage right where the logo is on the toe, otherwise usable; and an unknown make 3/8-inch complex profile with some moisture staining and rust on blade.

231 - Pair of ivory rules Pair of ivory rules: Stanley 12-inch #91ruler, yellowed, intact indexing pins, nice nickel, good overall; and an unknown make No. 53T ivory caliper rule with arched joint, missing the sliding caliper, very good overall.

232 - Two planes: BENSEN & CRANNEL ALBANY & H.L. JAMES Two planes: BENSEN & CRANNEL ALBANY N.Y plane, 1 3/4-inch skewed rabbet, very good overall; and a 1 1/4-inch side bead H.L. JAMES, WILLIAMSBURGH MASS, complete and fine.

233 - Unmarked 18th century? ogee plane with round wedge Unmarked 18th century? ogee plane with nice round wedge, very good overall.

234 - Two complex molding planes Two complex molding planes: REED UTICA ogee with smaller reverse ogee marked 7/8 on heel, very good; and a T.J. M’MASTER AUBURN fully boxed also marked 7/8 on heel, very good.

235 - Early complex molding plane with Newbould iron Early complex molding plane with Newbould iron, broad chamfers, fine overall.

236 - Pair of complex molding planes Pair of complex molding planes: on left is a CASEY & CO. AUBURN marked 5/8 on heel, small splinter from front right corner, very good overall; and a No. 128 AUBURN TOOL CO. marked 1/2 on heel, several owners stamps, very good overall.

237 - Monster No. 154 CASEY & CO. AUBURN complex profile Monster No. 154 CASEY & CO. AUBURN complex profile molding plane, marked INCH on heel, single boxed, fine overall.

238 - Cast iron railroad sign: STOP LOOK & LISTEN Unusual cast iron railroad sign that says STOP LOOK & LISTEN, has a round socket on the back and would have been mounted atop a 3 1/2-inch diameter pipe at road crossings along railroad tracks, this one was found by the current owner along a set of abandoned tracks outside Pittsburgh when he was deer hunting 40 plus years ago. It needs a good sandblasting and powder coating.

239 - Three wooden molding planes Three wooden molding planes including an R. WOLFF JR PITTSBURGH, PA, double boxed side bead.

240 - Edwin Frederick Patent (1901) inclinometer level Edwin E. Frederick Patent (Sept. 24, 1901) inclinometer level with 18-inch wooden stock having a brass inclinometer level inserted into it, the brass face is marked in degrees and PAT APPL’D FOR.

241 - Three J. CREAGH CINi Ohio round molding planes Three J. CREAGH CINi Ohio round molding planes.

242 - DENNING & CAMPBELL CHILLICOTHE, O. sash fillister DENNING & CAMPBELL CHILLICOTHE, O. handled screw-arm sash fillister plane, arms have several chips, nuts are good, good usable condition.

243 - Three wooden molding planes Three wooden molding planes: J. LAUTNER ALLEGHANY CITY, PA fully boxed round; E.A. STERLY & CO. round; and a R. HOEY N. YORK round.

244 - Birmingham 18-inch cast iron fore plane Birmingham 18-inch cast iron fore plane, some light surface rust, will clean to fine overall.

245 - Pair of wooden molding planes Pair of wooden molding planes: large PARKER, HUBBARD & CO. CONWAY, MASS round, very good; and an unmarked complex molder that is missing the front boxing.

246 - Hazzard Knowles Patent 20 1/2" iron jointer plane RARE Hazzard Knowles Patent 20 1/2-inch iron jointer plane, has large wooden font bun or handle, needs a wooden wedge and blade to complete, very good.

247 - Standard Rule Rust Patent 24" iron jointer plane Standard Rule Co. Rust Patent (U.S. No. 287,584) 24-inch (nominal) iron jointer plane with spots of light to moderate rust, almost all japanning is gone from the bed, some light pitting at top of original blade, no visible damage or repairs, complete and very good.

248 - Telescoping fork; carved spoon; & a curved rasp Lot: telescoping fork that is cracked where the fork screws onto the fitting at the end of the shaft; carved spoon made from a bone; and a curved rasp marked GERMANY on the tang.

249 - Table top wooden yarn swift w/ gear wheel Table top wooden yarn swift with gear wheel from 1800s, used for making skeins.

250 - Stanley #9 3/4 block plane with tail handle Stanley #9 3/4 block plane with tail handle, nice excelsior-style body, nice blade with BAILEY’S 1867 patent, fine overall.

251 - Unknown make 10-inch rosewood stuffed miter plane Unknown make 10-inch rosewood stuffed miter plane with captive gunmetal lever cap, later J. HERRING & SON LONDON iron, small corner chip in rear of throat, very good overall.

252 - Unknown make 4 1/2-inch chariot plane with cupids Unknown make 4 1/2-inch chariot plane with cupids bow bridge and at end of boxwood wedge, throat has probably been opened a time or two, a very showy plane overall.

253 - M. SLATER MAKER, CLERKENWELL LONDON shoulder plane M. SLATER MAKER MEREDITH ST. CLERKENWELL LONDON 1 1/2-inch infilled shoulder plane, very good overall.

254 - P. CALLEN MILWAUKEE 3-bladed cornice plane MASSIVE P. CALLEN MILWAUKEE Contemporary 3-bladed cornice or crown molding plane, used two type of wood, has wooden handles on each side at the front that a rope could be attached to for an apprentice to pull by, a fantastic plane by this contemporary maker, comes with a sample of the profile that it makes.

255 - NORRIS LONDON 1 1/4" infilled steel shoulder plane NORRIS LONDON 1 1/4-inch infilled steel shoulder plane, marked NORRIS LONDON on toe and has NORRIS LONDON blade with about 1/4-inch usable length remaining, some wedge bruising, very good overall.

256 - Unknown make 15 1/2—inch fielding plane Unknown make 15 1/2—inch fielding plane, with modified FIRTH & SONS blade, expertly replaced boxing done with a dark hardwood, very good overall.

257 - Rosewood stuffed 3/4" shoulder plane SLATER Rosewood stuffed 3/4-inch shoulder plane marked SLATER MAKER MEREDITH ST. CLERKENWELL LONDON on wedge, has W.MARPLES & SONS blade, very good overall.

258 - Unknown make bronze chariot plane rosewood stuffed Unknown make bronze chariot plane, rosewood stuffed, HERRING BROS blade, fine overall.

259 - SLATER, LONDON rhino horn stuffed shoulder plane M. SLATER MAKER MEREDITH ST. CLERKENWELL LONDON rhino horn 1 1/4-inch stuffed shoulder plane, little usable length remains in iron, very good overall.

260 - Nice 13 1/2" NORRIS LONDON infilled panel plane Nice 13 1/2-inch NORRIS LONDON infilled panel plane with gunmetal lever cap, nice MARPLES & SONS LONDON blade, very good overall.

261 - PRESTON PATENT nickel plated bullnose rabbet plane PRESTON PATENT nickel plated bullnose rabbet plane, screw adjusted blade, good nickel plating, very good overall.

262 - Unmarked 19 1/2" infilled trying or jointer plane Unmarked 19 1/2-inch infilled trying or jointer plane with captive gunmetal lever cap, nice HERNSHAW BRO. SHEFFIELD blade, very good overall.

263 - PRESTON japanned bullnose rabbet plane PRESTON japanned bullnose rabbet plane, about 1/4-inch usable length remains in blade, very good overall.

264 - GABRIEL LONDON ogee with wide chamfers GABRIEL LONDON ogee with wide chamfers, very good overall.

265 - 14 GABRIEL LONDON hollow and round planes Lot of 14 GABRIEL LONDON hollow and round molding planes, most have at least one owners mark and others have several.

266 - Large Lufkin 36" maple and brass drafting square Large Lufkin 36-inch maple and brass drafting square, has splinter from long side between 25 and 26 1/2-inch marks, good overall.

267 - Patented Transitional & Metallic Planes VOL. 1 IOB Patented Transitional and Metallic Planes in America (PTAMPIA) VOL. 1 by Roger K. Smith in original box it was shipped in with an extra dust jacket, inscribed to his friend Bill Baader, a former president of the MWTCA, a fine to near-new book.

268 - Two Proof pages from Roger K. Smith’s PTAMPIA book Two Proof pages from Roger K. Smith’s PTAMPIA book, one depicts the Morris “scissor” plow plane we have in lot 208, first of these proof pages we have seen, are printed on both sides and included color photos of a fine Lee’s stop chamfer plane and a Siegley plow plane.

269 - Stanley BEDROCK #608 FT iron jointer plane Stanley BEDROCK #608 FT iron jointer plane, has STANLEY-marked lever cap with orange background, good SW-logo blade, nice rosewood tote and tall knob, nice japanning, complete and very good.

270 - Two pair of small pliers: Scarce Stanley #3 1/2 sl Two pair of small pliers: Scarce Stanley #3 1/2 slip joint pliers, very good; and a Shapleigh’s Hardware (St. Louis) slip-joint pliers, very good.

271 - Stanley BEDROCK #608 RT iron jointer planes Stanley BEDROCK #608 RT iron jointer planes, has 3-line STANLEY R&L CO. BEDROCK lever cap, iron marked with just STANLEY, nice rosewood tote and low knob, good japanning, complete and very good.

272 - RARE set of four Stanley 4-SQUARE files RARE set of four Stanley 4-SQUARE files with wooden handles, each handle has a 4-SQUARE decal on it. This is the only set of 4-SQUARE files we are aware of.

273 - Stanley BEDROCK #608C FT, good SW-logo blade Stanley BEDROCK #608C FT, good SW-logo blade, nice rosewood tote and tall knob, japanning is peeling in rear of bed, some light rust, will clean to very good overall.

274 - Stanley #1104 4-square iron smooth plane Stanley #1104 4-square iron smooth plane, fine gray paint in bed, red frog, fine red-stained hardwood tote and tall knob, has 4-SQUARE logo cast into face of lever cap, fine overall.

275 - Stanley BEDROCK #608C RT iron jointer plane Stanley BEDROCK #608C RT iron jointer plane, nice T-logo blade, rosewood tote missing splinter from right side of spur, good rosewood low knob, 2-line “STANLEY BEDROCK” lever cap, complete and very good.

276 - Pair of Stanley Victor #1103 smooth planes Pair of Stanley Victor #1103 smooth planes; one 1930s and one 1950s, both are complete and fine.

277 - 18-inch Stanley 4-square wooden plumb and level Unusual 18-inch Stanley 4-square wooden plumb and level with partial decal remaining on stock, very good overall.

278 - Stanley #2 Type 5 iron smooth plane Stanley #2 Type 5 iron smooth plane with first-type lateral lever, nice rosewood tote and beaded knob, good STANLEY RULE & LEVEL CO. blade, complete and very good.

279 - Scarce Stanley #197 hard board fluting tool Scarce Stanley #197 hard board fluting tool with wooden handle, made from 1936 to 1942, has STANLEY name on one side of handle, fine overall.

280 - FINE Stanley #1 smooth plane FINE Stanley #1 smooth plane, late model with STANLEY lever cap, fine SW-logo blade, one of the nicest #1 smooth planes we have ever sold.

281 - Scarce Stanley #198 cast iron razor blade holder Scarce Stanley #198 cast iron razor blade holder, like new.

282 - Unusual LUFKIN square with brass ends Unusual LUFKIN square with brass ends and brass at inside corner, one leg marked THIRDS and the other HALVES, very good overall.

283 - 3 EAIA indices & an 25th Anniversary Chronicle Three EAIA indices and an original 25th Anniversary (1958) Chronicle Publication.

284 - Stanley #53 1/2 architects 24-inch 4-fold rule Stanley #53 1/2 architects 24-inch 4-fold rule, very good overall.

285 - Eric Sloan’s The Cracker Barrel 1967 First Print Eric Sloan’s The Cracker Barrel 1967 First Printing, very good.

286 - Two 24-inch 4-fold rules: H.CHAPIN No. 24 & C-S Two 24-inch 4-fold rules: H.CHAPIN No. 24 with somewhat faint mark, missing the indexing pins, good overall; and a C-S No. 62 brass-bound rule, very good overall.

287 - Three Eric Sloane Books Three Eric Sloane Books: Diary of Early American Boy; A Museum of early American TOOLS; and a REVERENCE FOR WOOD; all come inside the original sleeve they were sold in.

288 - Keen Kutter K320 12-inch 4-fold caliper rule Keen Kutter K320 12-inch 4-fold caliper rule, complete and fine.

289 - Eric Sloane’s book AMERICA Eric Sloane’s book AMERICA which is three previous books (American Barns and Covered Bridges; Our Vanishing Landscape; and American Yesterday), complete with dust jacket, very good.

290 - Unknown make 12-inch 4-fold No. 1 rule Unknown make 12-inch 4-fold No. 1 rule, good overall.

291 - Eric Sloane’s The Spirits of ’76 book 1973 edition Eric Sloane’s The Spirits of ’76 book 1973 edition, some small tears in dust jacket, very good overall.

292 - Large sharpening stone & a screw box Large sharpening stone in pasteboard box; and a newer screw box marked 1/2-in - 8, CONOVER WOODCRAFT SPECIALTIES, INC, fine.

293 - PETE CALLEN MILWAUKEE adjustable chamfer plane PETE CALLEN MILWAUKEE Contemporary adjustable chamfer plane made of dark tropical hardwood with a wedge of lighter colored wood, fine overall.

294 - 3 treen objects including 2 spool like devices Three treen objects including two round, spool-like devices; and roller used to decorate pastries or pie crusts.

295 - Lucas carbide lamp for bicycle, motorcycle or car Lucas carbide lamp for bicycle, early motorcycle or automobile, very good overall.

296 - ROBERT SORBY SET OF 5 MICRO WOODTURNING TOOLS IOB ROBERT SORBY SET OF 5 MICRO WOODTURNING TOOLS, in original pasteboard box, all five tools are in fine condition with original handles. box is lightly soiled.

297 - Two ADLAKE railroad padlocks each having a chain Two ADLAKE railroad padlocks each having a length of chain.

298 - PETE CALLEN MILWAUKEE skew bladed panel plane PETE CALLEN MILWAUKEE Contemporary skew bladed panel plane,

299 - Specialty Mfg. Co. Decatur, ILL pencil sharpener Specialty Mfg. Co. Decatur, ILL pencil sharpener, very good.

300 - PETE CALLEN MILWAUKEE skew bladed panel plane PETE CALLEN MILWAUKEE Contemporary skew bladed panel plane,

301 - LeRoy Lettering Set in original wooden box LeRoy Lettering Set in original wooden box. appears to be complete and very good.

302 - Siegley No. 2 plow plane in a partial wooden box Siegley No. 2 plow plane, fine condition in a partial wooden box with set of blades, one of the nicest Siegley No. 2 planes we have seen or sold.

303 - Chaplin’s Patent iron jack plane Chaplin’s Patent iron jack plane, good wooden knob, very good hard rubber tote, very good overall.

304 - Three Stanley clapboard tools Three Stanley clapboard tools: two gauges and one marker, all very good.

305 - Stanley #97 piano-maker’s chisel plane Stanley #97 piano-maker’s chisel plane with SW-logo blade, some pitting on the bottom near the toe, will make a very good user.

306 - Stanley #248 Watherstripping plow plane in wood bo Stanley #248 Watherstripping plow plane in owner-made wooden box with all parts, complete and fine.

307 - Stanley #11 leather belt chamfering plane Stanley #11 leather belt chamfering plane, has one repair to rear corner of throat, good overall.




Auctioneer License Information: MO

    Auction Listings provided by AuctionZip.com. Although the information published herein is from sources deemed reliable, AuctionZip.com expressly disclaims any liability for errors, omissions or changes regarding any information provided for this auction. Potential buyers are urged to verify auction date, time, and content directly through the auctioneer's website or by contacting the auctioneer directly. The terms and conditions of the auction may or may not be published in this listing. ALL TERMS AND CONDITIONS AND OTHER ANNOUNCEMENTS MADE THE DAY OF THE AUCTION ARE BINDING AND TAKE PRECEDENCE OVER ANY INFORMATION FOUND HEREIN.