CLOSE
( E-Mail, User ID, or Auctioneer ID )
(Uncheck if using a shared computer)


Auction Information
Auctioneer M. Davis Group 4125215751
Auction Date May 24 Auction
Location
1080 River Avenue
Pittsburgh, PA
Time 11:00AM
Auctioneer's Other ListingsE-mail AuctioneerAuctioneer's Web Site
View Full Photo Gallery
Auction Listing
AuctionZip Auctioneer ID# 25397

Fruit & Vegetable Receiving, Processing & Cooking Equip Auction – Surplus to Riverbend Foods

FEATURED AUCTION  |  ONLINE  |  DATE: MAY 17TH – MAY 24TH, 2018 @ 11am EDT
LOCATION:
1080 River Avenue, Pittsburgh, PA 15212


REGISTER

LOT CATALOG

BID ONLINE


M Davis Group is pleased to work in conjunction with Gordon Brothers to present this auction.

COMPLETE CARROT & OTHER VEGETABLE RECEIVING, PROCESSING & WASTE LOADOUT SYSTEM

(NOTE: Maximum Capacity for Double Shift (18 Hrs.) is (4) Truck Loads or 170,000 lbs.)

Receiving System

Vanmark Corp S/S 8 ft L x 5 ft W x 48″ D Vegetable Receiving Hopper with 14″ S/S Bottom Auger

Vanguard 12 ft H x 24″ W S/S Vertical Power Transfer Auger, with 58″ L x 24″ W Bottom Hopper & Top Mounted Chute

Vanguard Corp. S/S Vegetable Pump System with 5 ft L x 6 ft W x 54″ D S/S Hopper Includes Cornell 50 hp Centrifugal Pump

Carrot & Other Vegetable Processing Line

Custom Fabricated S/S Vegetable Hydraulic Dump Hopper /Bin Elevator System, Includes 52″ W x 48″ D x 75″ H Dump System with 3 hp Hydraulic Pump with Reservoir, 7 ft W x 7 ft L x 5 ft D S/S Feed Bin with Side Pneumatic Gate,18 ft L Auger Conveyor System with 18″ S/S Power Feed Auger with Electric Drive Motor with S/S Frame

Key 7 ft. L x 30″ Vibratory Dewatering / Fines Removal / Shaker Conveyor, Includes 2 – Level Screen, Mounted on 4 ft. H S/S Frame

Vanmark Peeler / Scrubber / Washer, S/N 027457044099902, with (8) Roller Positions, S/S Paddle, All Hydraulic Driven, Water Spray Heads, S/S Enclosed Covers, Mounted on S/S Frame, Infeed Chute, Includes 25 hp Hydraulic Pump with Reservoir

3 – Level S/S Support & Operators Platform, (Measuring – 23 ft L x 10 ft 9″ W & 4 ft W x 8 ft 7″ to 12 ft H), with 4″ x 4″ Supports, Mostly Welded Constructed, Stairs, Plastic Grating, Handrail, (Vanmark Peeler & Key Shaker Deck Support & Operators Platform)

42 ft S/S Inclined Conveyor System, with 23″ W Belt with 12″ Flights, 5 hp / 1745 RPM Electric Drive Motor, S/S Sides, S/S Leg Supports up to 14 ft 10″ H, 208/230/460V 3 Phase

Odenberg All S/S Vegetable Steam Peeler, S/N 91015, 11 ft. H x 5 ft. W x 9 ft. L Chamber, SEW 5 hp 1660 RPM Drive Motor, 300 psi @ 500 Degrees, with Controls, Also Includes Top Mounted S/S Feed Hopper on Load Cells with Digital Read Out, 14 Ft Bottom Mounted S/S Auger Conveyor System, Mounted Operators Platform, (Overall Dimension 10 ft. W x 9 ft. L x 13 ft. 4″ H or 18 ft. H to top of Feed Hopper)

Vanmark Peeler / Scrubber / Washer, S/N 027457044099901, with (8) Roller Positions, S/S Paddle, All Hydraulic Driven, Water Spray Heads, S/S Enclosed Covers, Mounted on S/S Frame / Operators Platform, Infeed & Outfeed Chute, Includes Parker 25 hp Hydraulic Pump with Reservoir

Vanmark Peeler / Scrubber / Washer, S/N 027457044099903, with (8) Roller Positions, S/S Paddle, All Hydraulic Driven, Water Spray Heads, S/S Enclosed Covers, Mounted on S/S Frame, Infeed Chute, Includes Parker 25 hp Hydraulic Pump with Reservoir

All S/S Vertical Auger Conveyor System, with 24″ S/S Auger & Electric Drive Motor, 58″ W x 22″ x 26″ D Bottom Mounted S/S Hopper

Key 16 ft L x 36″ W All S/S Vibratory Shaker Deck, Mounted on 2 ft H S/S Frame, Includes 16 ft 6″ L x 93″ W x 7 ft H S/S Operators Platform with Stairs & Plastic Grating

Key 13 ft L x 30″ W All S/S Vibratory Shaker Deck, Mounted on 2 ft H S/S Frame, Includes 15 ft L x 11 ft 8″ W x 6 ft 3″ H S/S Operators Platform with Stairs & Plastic Grating

Urschel Dicer, Model GA, S/N 2393, with 19″ x 15″ S/S Feed Hopper & 18″ H Frame Support

2008 Key Tegra 60″ In-Air Digital Color Sorter, Model 7775-604219-1, SN 08-199029 with (4) Cameras, PLC Controls with Touchpad Display, 480V 3 Phase

2008 Key 8 ft 4″” L x 53″” W All S/S ISO – FLO Vibratory Dewatering / Fines Removal / Shaker Conveyor, Model 604219-2, SN 08 -199030, with 4 – Levels with (2) S/S Screens, Mounted on 4 ft 10″” H S/S Frame, Includes Bottom Mounted S/S Drain Hopper, (In-Feeding Tegra Sorter)

16 ft L Inclined S/S Belt Conveyor System with 24″” W Belt, 1 hp Electric Drive Motor, S/S Side Rails, up to 3 ft H Leg Supports, (Out-Feeding Tegra Sorter)

Key Line Pump System with 24″ L x 19″ W x 18″ D S/S Hopper with 7.5 hp / 1750 RPM Centrifugal Pump with 4″ x 4″ Line Connections, 208/230/460 V 3 Phase, Mounted on S/S Frame with Square D Switch

Key S/S 18″ W x 34″ L x S/S Rotary Drum Screen / Fume Tank, with Electric Drive Motor, S/S Frame & Square D Switch

Chapman Corp. 14 ft 4″ H x 9 ft 6″ W x 9 ft 6″ L x All S/S Cone Bottom Vegetable Accumulation Hopper, Order No. 05362, Project No. 51448, Mounted on Weigh-Tronix Digital Load Cells with SAI Model 530 Digital Read-Out, 6 ft L Dual Bottom Auger Conveyor with Electric Drive Motors, S/S Support Legs, 4 ft 7″ L Infeed Separator Chute, Top Sprayer Manifold, (Interior Diam. 8 ft 5″W x 8 ft 5″ L x 10 ft 4″ H), (North System)

Chapman Corp. 14 ft 4″ H x 9 ft 6″ W x 9 ft 6″ L x All S/S Cone Bottom Vegetable Accumulation Hopper, Order No. 05362, Project No. 51448, Mounted on Weigh-Tronix Digital Load Cells with SAI Model 530 Digital Read-Out, 6 ft L Dual Bottom Auger Conveyor with Electric Drive Motors, S/S Support Legs, 4 ft 7″ L Infeed Separator Chute, Top Sprayer Manifold, (Interior Diam. 8 ft 5″W x 8 ft 5″ L x 10 ft 4″ H), (South System)

U – Shaped S/S Operators Platform, (23 ft W x 23 ft L x 4, 7 & 8 ft W x 12 ft H), Mostly Welded Constructed with Plastic Grating, (2) Sets of Stairs with Handrails & Leg Support, (Note: Surrounds Accumulation Hopper System)

Key Line Pump System with 42″ L x 34″ W x 21″ D S/S Hopper with Cornell 60/50 hp / 1770/1460 RPM Centrifugal Pump with 6″ x 6″ Line Connection, 208/230/460 V 3 Phase, Mounted on S/S Frame with Square D Switch

Key Line Pump System with 42″ L x 34″ W x 21″ D S/S Hopper with 30 hp / 1760 RPM Centrifugal Pump, Model 6NHP-F6K, 208/230/460 V 3 Phase, Mounted on S/S Frame with Square D Switch

Key S/S 18″ W x 34″ L x S/S Dual Rotary Drum Screen / Fume Tank with Electric Drive Motor, Sprayer, 36″ H S/S Frame & Square D Switch

Key S/S 18″ W x 34″ L x S/S Dual Rotary Drum Screen / Fume Tank with Electric Drive Motor, Sprayer, 36″ H S/S Frame & Square D Switch

 Carrot Waste & Load-Out System

Heliarc S/S 24″ W x 48″ L x S/S Rotary Drum Screen / Rotostrainer, Model RSA2548-1, S/N 310003, #2548-1X020, with SEW Drive Motor

Key Line Pump System with 24″ L x 19″ W x 18″ D S/S Hopper and 7.5 hp Centrifugal Pump with 4″ x 6″ Flanged Connections

Rietz 10 ft Thermascrew Vertical S/S Power Auger Conveyor System, Model TLT16-K2210, SN T-681953, with 15″ S/S Auger & Electric Drive Motor & Bottom S/S Feed Hopper

Galfab 20 Cubic Yard Enclosed Waste Container, Model OS2244, SN 2515, with Top Mounted Hinged Door &Top Mounted Power Auger, (Box Diam. 22 ft L x 7 ft W x 64″ H)

VEGETABLE RECEIVING & WASH SYSTEM

Custom Designed ~30 ft. L x 5 ft. W x 29″ Deep All S/S Fruit & Vegetable Washer / Immersion Wash System, Includes 53″ W Cleated S/S Conveyor with Flights & 12 ft Extended Inclined with Electric Drive, Hydraulic Level System with 3 hp Hydraulic Pump, S/S Chute, (Overall Dimension ~42 ft L x 65″ W x 42″ H up to 140″ H)

~11 ft. L x 34″ W S/S Belt Conveyor System with Dura Drive Roller Drive System, Mounted on 53″ H Leg Supports, with Square D Safety Switch

~13 ft. L x 11 to 14 ft. W S/S Vegetable / Fruit Receiving Hopper with Safety Guard, with 14 ft. L x 16″ W Bottom Chain Driven Conveyor System with 12″ Dividers

Lyco Peeler / Washer, Model 11000, S/N 110509919, with (11) Roller Positions, S/S Screw Auger, All Hydraulic Driven, Water Spray Heads, S/S Enclosed Covers, Mounted on S/S Frame with Mounted Operators Platform Includes Parker 30 hp Hydraulic Pump with Reservoir

Lyco Peeler / Washer, Model 11000, S/N  052990819, with (11) Roller Positions, S/S Screw Auger, All Hydraulic Driven, Water Spray Heads, S/S Enclosed Covers, Mounted on S/S Frame with Mounted Operators Platform  includes Parker 30 hp Hydraulic Pump with Reservoir

~8 ft. 5″ S/S Inclined Belt Conveyor System with 20″ W Belt with Flights & Siderails, (Note: Power Roller Missing), Mounted on up to 90″ H Leg Supports

~8 ft. L Conveyor System with 18″ W Intralox Conveyor with Flights, Side Rails & Electric Drive, Mounted on 79″ H Legs

~11 ft. L Belt Conveyor System with 34″ W Belt, Dura Drive Power Roller Driven, Side Rails, Mounted on 55″ H Leg Supports

~8 ft. L x 3 ft. W 2 – Level S/S Inspection / Operators Platform, 18″ & 11″ H with Plastic Grating & Handrail

Odenberg 25 ft. L S/S Inclined Belt Conveyor / Hopper System with 23″ W Belt, 19″ Flights, Side Rails, 75″ W x 78″ Bottom Mounted Hopper, Top Chute, SEW Electric Drive & Square D Switch

VEGETABLE RECEIVING / WASH / PEELING / SLICE & COOKING SYSTEM

Lyco Peeler / Washer, Model 11000, S/N  P039811428I, with Set up for (9) Roller Positions, (Note: Brushes Removed), S/S Screw Auger, All Hydraulic Driven, Water Spray Heads, S/S Enclosed Covers, Mounted on S/S Frame with Mounted Operators Platform

Lyco Peeler / Washer, Model 8000, S/N  07309610603, with (8) Roller Positions, S/S Screw Auger, All Hydraulic Driven, Water Spray Heads, S/S Enclosed Covers, Mounted on S/S Frame with Mounted Operators Platform

16 ft. L S/S Inclined Conveyor System, with 24″ W Intralox Belt with 8″ Flights, Siderails, SKK Drive, up to 65″ H Leg Supports

13 ft. L S/S Inclined Conveyor System, set up for 16″” W Belt, (Note: Belt Missing), Siderails, Drain Pan, SKK Drive, up to 103″” H Leg Supports

Key 22 ft. 9″ L S/S Conveyor System, with 26″ W Intralox Belt with 8″ Flights, Drain Pan, Electric Drive, 52″ H S/S Leg Supports & Square D Switch

S/S Inclined Belt Conveyor System with 18″ W Belt with 6″ Flights, Siderails, Drain Pan, Variable Speed Electric Drive, up to 93″ Leg Supports

 ~16 ft, L x 34″ W x 17″ H S/S Inspection / Operators Platform with Plastic Grating & Handrail

Urschel Dicer, Model HS, S/N 449, 2 hp 1730 RPM Motor, 230/460 V 3 Phase with 23″ x 20″ Feed Hopper & 66″ H Frame Support

Key ~14 ft. L x 36″ W S/S Vibratory Dewatering / Fines Removal / Shaker Conveyor with Electric Vibrator Motor, Sprayer System, Drain Pan, 50″ H Support Frame & Square D Switch

~22 ft. 9″ L S/S Inspection Conveyor System, with 35-1/2″ W Belt with Lane Divider, Electric Drive, 50″ H S/S Leg Supports & Square D Switch

~18 ft. 9″ Inclined Screw Auger Conveyor System with 18″ All S/S Auger, 5 hp / 1680 RPM Electric Drive Motor, 230 / 460 V 3 Phase, Top Covers, with Leg Supports

Rietz ~20 ft. L x 30″ W x 35″ D Single Screw Steam Cooker / Blancher, Model TL-30-K2220, S/N TL-83001113 with 28″ S/S Screw Auger, Sterling 2 hp / 1725 RPM Variable Speed Electric Drive System, 208/230/460V 3 Phase, Hinged Top Covers, Steam Injection Manifold, Temp Sensor, Square D Switches, Mounted on 51″ H Operators Platform with Stairs

STEAM COOKER / BLANCHING SYSTEM & DE-PITTERS

L&A ~20 ft. L x 7 ft. W x 38″ D Dual Screw Steam Cooker / Blancher, S/N 10297, with 36″ Dual S/S Screw Auger, Dual US Motors 5 hp / 1740 RPM Electric Drive Systems, 230/460V 3 Phase, Hinged Top Covers, Steam Injection Manifolds, Temp Sensor, Square D Switches with Mounted Operators Platform with Stairs

Langsenkamp 24″ S/S De-Pitter (Pulper), Model A, S/N T316SS, with 20 hp / 1760 RPM Drive Motor, 230/460V 3 Phase, (Note: Internal Screens / Components not Included)

Langsenkamp 24″ S/S De-Pitter (Pulper), Model A, S/N 206141S, with 20 hp / 1760 RPM Drive Motor, 230/460V 3 Phase, (Note: Internal Screens / Components not Included)

Additional Conveyor Systems

23 ft. S/S Belt Conveyor System with 24″ W Belt, Electric Drive, 26″ H S/S Leg Supports

28 ft. S/S Belt Conveyor System with 24″ W Belt, Electric Drive, 12″ H S/S Leg Supports, (Receiving Conveyor)

Heliarc S/S 36″” W x 53″” L x Rotary Drum Screen, Model 98020, S/N 010

SQUASH PREP VEGETABLE PROCESSING SYSTEM LINE

Custom Designed 42″ All S/S Squash Cutter, with 10/7.5 hp Drive 1745/1425 RPM Drive Motor, Hinged Lid Top, Includes Bottom Drop Tapered Hopper, Inspection Doors with Safety Switches, 208/230/460V, 3 Phase

Custom Designed 42″ All S/S Squash Cutter, with 10/7.5 hp Drive 1745/1425 RPM Drive Motor, Hinged Lid Top, Includes Bottom Drop Tapered Hopper, Inspection Doors with Safety Switches, 208/230/460V, 3 Phase

~14 ft. 9″ L S/S Belt Conveyor System, with 33″ Belt, Bryant Electric Drive Roller, Side Rails, (Note: Mounted on Bottom of Squash Cutters – No Leg Supports Included)

~11 ft. 7″ L S/S Inclined Inspection Conveyor System, with 34″ W Belt with 18″ Flights, S/S Siderails, Sparks Dura Drive Power Roller, up to 36″ H Leg Supports & Square D Switch

~8 ft. 9″ L S/S Inspection Conveyor System, with 34 1/2″ W Belt with, S/S Siderails, SEW Electric Drive Motor, 29″ H Leg Supports & Square D Switch

~13 ft. L S/S Inclined Conveyor System, with 18″ W Intralox Belt with 12″ Flights, S/S Siderails, Electric Drive Motor, up to 5 ft H Leg Supports & Square D Switch

~13 ft. 9″ L S/S Inclined Conveyor System, with 18″ W Intralox Belt with 12″ Flights, S/S Siderails, Mounted S/S Hopper, Electric Drive Motor, up to 5 ft. H Leg Supports & Square D Switch

~20 ft. 6″ L S/S Inspection Conveyor System, with 34″ W Belt, S/S Siderails with Side Gate, Sparks Dura Drive Power Roller, up to 4 ft. H Leg Supports & Square D Switch

~28 ft. L S/S Inclined Inspection Conveyor System, with 34″ W Belt with 12″ Flights, S/S Siderails, Sparks Dura Drive Power Roller, up to 4 ft. H Leg Supports & Square D Switch

(3) pcs. – S/S Operators Platforms, Includes (2) ~6 ft. L x 30″ W x 22″ & 12″ H, ~8 ft. L x 36″ W x 5″ H, All with Plastic Grates

~22 ft. L S/S Inclined Conveyor System, with 34″ W Belt with 12″ Flights, S/S Siderails, Bottom Drain Pan, Sparks Dura Drive Power Roller, up to 8 ft. 6″ H Leg Supports & Square D Switch, (Feeding Squash Cutters)

 

S/S HOLDING TANKS, PUMPS & OTHER PROCESSING

~500 Gal Vertical Single Wall S/S Tank with Hinged Lid, S/S Legs, Rosemont Level Sensor, (Tank Dimension ~55 – 65″ H x 48″ W)

~500 Gal Vertical Single Wall S/S Tank with Hinged Lid, S/S Legs, Rosemont Level Sensor with Bottom Plug Valve, (Tank Dimension ~65″” H x 48″” W)

~500 Gal Vertical Single Wall S/S Tank with Hinged Lid, S/S Legs, Rosemont Level Sensor, (Tank Dimension ~85″ H x 42″ W)

~500 Gal. Vertical Single Wall Cone Bottom S/S Tank with Top Man Door, S/S Legs, Rosemont Level Sensor, (Tank Dimension ~67″ H x 48″ W)

(2) 6 ft. 4″” H S/S Tank Platform Stairs with ~30″” W x 24″” L Platform & Handrail

~7 ft. 6″ H S/S Tank Platform Stairs with ~30″ W x 24″ L Platform & Handrail

~7 ft. H S/S Tank Platform Stairs with ~30″ W x 24″ L Platform & Handrail

Ampco 5 hp Centrifugal Pump, Model DC2, with 2-1/2″ x 2″ Clamp Type S/S Head, Marathon 3460 RPM Motor, Mounted on S/S Stand

Ampco 15 hp Centrifugal Pump, Model DCH2, with 3″ x 2-1/2″ Clamp Type S/S Head, Baldor Motor, Mounted on S/S Stand

Ampco Aprox. 15 hp Centrifugal Pump, Model DCH2, with 3″ x 2-1/2″ Clamp Type S/S Head, Baldor Motor, Mounted on S/S Stand

~36″” x 36″” x 20″” D S/S Feed Hoper with 8″” Line Connection

CONDENSATE EVAPORATOR / CONDENSER

L&A Engineering S/S Condensate Evaporator/ Condenser, S/N 10296, (Inside Product Dimension – ~6 ft. L x 64″ W x 100″ Deep ) includes 4″ S/S Coil Bundle, 15 hp Drive Motor with 1770 RPM, Duct Work, Rosemont Level Sensor, 230/460V 3 Phase, Includes S/S Operators Platform

MUSHROOM PROCESSING EQUIPMENT

Incline Conveyor Overhead Top-Mounted Water Spray Nozzles

S/S Dicer

KEY Key Water Reclaim / Filter Unit (Used to Remove Solids From Water Reclaimed From Mushroom Washing)

S/S Rotary Tumbler / De-Stoner, Equipped with Water Spray Nozzles

S/S Accumulation & Inspection Table

S/S Water Flume (Transports Product to Downstream Packaging and Processing)

S/S Water Bath

ADDITIONAL SURPLUS EQUIPMENT


LARGE ASSORTMENT OF ADDITIONAL PACKAGING & PROCESSING EQUIPMENT TO BE ADDED SOON!

PLEASE CHECK BACK FOR ADDITIONAL INFORMATION!

 




Auctioneer License Information: AU001458L

    Auction Listings provided by AuctionZip.com. Although the information published herein is from sources deemed reliable, AuctionZip.com expressly disclaims any liability for errors, omissions or changes regarding any information provided for this auction. Potential buyers are urged to verify auction date, time, and content directly through the auctioneer's website or by contacting the auctioneer directly. The terms and conditions of the auction may or may not be published in this listing. ALL TERMS AND CONDITIONS AND OTHER ANNOUNCEMENTS MADE THE DAY OF THE AUCTION ARE BINDING AND TAKE PRECEDENCE OVER ANY INFORMATION FOUND HEREIN.