( E-Mail, User ID, or Auctioneer ID )
(Uncheck if using a shared computer)

Auction Information
Auctioneer Koster Industries Inc. (631) 454-1766
Auction Date May 22 Auction
1900 Hayes Avenue
Camden, NJ
Time 01:00PM
Auctioneer's Other ListingsE-mail AuctioneerAuctioneer's Web Site
Auction Listing
AuctionZip Auctioneer ID# 44842
Online Bidding Closes: Tuesday, May 22, 2018 at 2:00 P.M. EDT
Inspection: Monday, May 21, 2018 from 8:00 A.M. to 4:00 P.M.

1900 Hayes Avenue, Camden, NJ 08105

2007 1,300-Watt Mazak “Champion” Super Turbo-X48 Laser, travels: x-105.7”, y-50”, z-3.9”, 98.4” x 49.2” x .047” work size, CO² Laser YB-L130A8M, Mazatrol preview control, UAS Mdl. SFC6-3 dust collection system (S/N: 60072248), S/N: 197545


100 Ton Minster Mdl. P2-100-48 “Piece-Maker” High Speed Press, 2” stroke, 4” adjustment, 19” shut height, vari-speed, 48” x 31” bed, litlell 14” roll feed, 100-300 SPM, S/N: P2-100-16522

75 Ton Minster Mdl. PM3-75-42 High Speed Press, 42” x 26” bed, 0-800 SPM, 28.62” shut height, 1.25” stroke, 2” adjustment, vari-speed, Wintriss control, Vamco TS6 roll feed, S/N: PM3-75-24787

60 Ton Minster Mdl. P2-60-36 High Speed Press, 1.5” stroke, 3” adjustment, 17.5” shut height, 36” x 25” bed, Vamco TS6 roll feed, 0-450 SPM, control console, S/N: P2-60-22377

60 Ton Minster Mdl. P2-60-36 “Piece-Maker” High Speed Press, 2” stroke, 3” adjustment, 17.5” shut height, 36” x 25” bed, 125-375 SPM, vari-speed, Vamco “Van Mark 6” feed, console, S/N: 20333

60 Ton Minster Mdl. P2-60 “Piece-Maker” High Speed Press, 2” stroke, 3” adjustment, 17.5” shut height, 125-375 SPM, vari-speed, lube, 36” x 25” bed, Gemco 1995 Plus microset, Cieco PCI-100, control console, PS Industries Mdl. HPF-100, S/N: P2-60-18467

30 Ton Gasbarre Type VGS High Speed Press, 100-1200 SPM, vari-speed, motorized ram adjustment, 28” x 36” bed area, Variax V76 feeder, continuous / single stroke, dual palms, lube system, Cieco automation, Allen Bradley Panelview Plus 400, S/N: 0401

30 Ton Bruderer “BSTA 30” 3-Post High Speed Press, vari-speed, dual palms, 100-600 SPM, 16-40 mm stroke, PA Industries “The Edge” 2-1/2” Mdl. HPF-60 servo roll feed, S/N: 8670298, Triad 3200 control system, Cemco Patriot 1995 PLS, witness procam 1500 cam switch.

30 Ton Minster Mdl. P2-30 “Piecemaker” High Speed Press, air clutch, 3” stroke, 250 SPM, 11.5” shut height, 2” adjustment, 30” x 19” bed area, vari-speed, roll feed, S/N: P2-30-17225

30 Ton Minster Mdl. P2-30-24 ”Piecemaker” High Speed Press, 1.25” stroke, 12.25” shut height, 24” x 19” bed area, 0-600 SPM, S/N: P2-22380

30 Ton Minster Mdl. P2-30-24 ”Piecemaker” High Speed Press, PA Industries “Ultra Edge” Mdl. SRF-100ULTRA servo roll feed, S/N: 31860105

25 Ton Bruderer Mdl. “BSTA 25” High Speed Press, ½” – 1-1/2” variable stroke, 100-1500 SPM, vari-speed, Bruderer BBV-202/120 feed, motorized ram adjustment, 21” x 21” bed, control console, S/N: 1641

10 Ton (Approximately) Henry & Wright 4-Post High Speed Press, air clutch, vari-speed, 7” x 7” between posts, 7.5HP motor, PA Industries SRF-1000 “Ultra Edge” servo feed

10 Ton Bruderer Mdl. 10L Mini 4-Post High Speed Press, Durant Mdl. MP-3HP, Feed Pro with Quartech 2800 PLC, 15-1/2” x 8-1/4” between posts, batch counter, stroke totalizer, stroke selector, S/N: 980318

4-Post High Speed Press, 28” x 36” t-slotted bolster, 4-cylinder, 13” x 13” between posts

35 Ton Niagara Mdl. M35 OBI Flywheel Type Punch Press, 5” stroke, 2-1/4” adjustment, 13-1/4” shut height, 24” x 15” bed, 15” x 12” ram, 57-150 SPM, air clutch, S/N: 49239

22 Ton Minster #3 OBI Flywheel Type Punch Press, 2” stroke, 2” adjustment, 11.5” x 20” bed, 8.5” x 12” ram face, dual palms, air clutch, vari-speed, S/N: 3-12043

15 Ton Rousselle #2E Air Clutch Flywheel Type OBI Press, dual palm, 16-1/4” x 11” bed, S/N: 13958

2 Ton Bench Type Flywheel Press

15” Cooper Weymouth Peterson Mdl. 15TCS Stock Straightener, .010” – .062” material thickness, S/N: 37255

[2] 12” Cooper Weymouth Peterson Stock Straighteners, 17-roll, S/N’s: n/a; V1217022

[2] 8” Cooper Weymouth Peterson Mdl. CWP8SPS Stock Straighteners, 17-roll, S/N’s: N/A; 16385

[3] 6” Cooper Weymouth Peterson Mdl. 6SPS Stock Straighteners, .062” material thickness, 120-1200 IPM, S/N’s: M23816-1; 6171074R; V6171071

6” Cooper Weymouth Peterson Mdl. 6SPS Stock Straightener, .010” – .093” material thickness, 2100 IPM, S/N: C10762

[3] 6” Cooper Weymouth Peterson Stock Straighteners, 17-roll, S/N’s: V6171090; V617880; V6171672

[4] 6” Cooper Weymouth Peterson Mdl. 6SPS Stock Straighteners, .90” – .062” material thickness, 50 FPM, S/N’s: C3953-1; C3953-2; V6171051; 16474

5” Bruderer Mdl. 12-120/10-12 Precision Straightener, S/N: 30231

3” Rapid-Air Mdl. SA3 Straightener & Power Roll, S/N: 130870

Norwalk “Innovator” Mdl. CR3542 Motorized Uncoiler, 41” turntable, S/N’s: 425250; 4255494; 425409; 423199; N/A; 420875; 420877

Assorted Jaco & Durant Non-Motorized Uncoilers

4000# Littell Mdl. 40-18 Auto-Centering Reel, 16” – 20” ID, 18” width, S/N: 49547-53


Pollution Controlled Products Mdl. DC-3A-5363 Burn Off Furnace, natural gas, Honeywell digital controls, 350,000 BTU, 41” wide x 44” high x 48” deep approximate inside dimensions

12” Sargeant & Wilbur Mdl. B1C-131342-S Pass Thru Belt Furnace, 7-zone, approximately 42’ long, digital controls, nitrogen / hydrogen meters, S/N: 6306WI-F

12” B/U Engineering “Transaheat” Mdl. THR126-3-108E-4 Pass Thru Belt Furnace, 4-zone, approximately 38’ long, S/N: MMN-2

7” Lindberg Pass Thru Belt Furnace, 3-zone, digital temperature controls, S/N: N/A


6 Ton Greenerd Mdl. HPB-5 Hydraulic C-Frame Press, dual palm, position control, 10” x 14” bed, S/N: 06T6654


24” Timesaver Mdl. 125-1M Vertical Belt Sander, 8” height adjustment to table, 10HP main motor, 1HP geared vari-speed table, Kufo Mdl. UFO-102B, S/N: 12291


3” Cut-Off, 3” Rapid-Air Feed, pneumatic

12” Rapid-Air Mdl. FSC12 Cut-Off, S/N: 124967, Mdl. L16E Slide Feed, S/N: 127680, pneumatic

4-Stand Bench Type Roll Former, approximately 1-1/2” roll space, pneumatic cut-off & slide feed, 12-station carousel parts catcher

SIP Mdl. “Hydroptic-6A” Vertical Jig Borer, 33-1/4” x 43-1/4” table, S/N: 18

6” x 18” Parker Majestic Hand Feed Surface Grinder, direct drive spindle, Brown & Sharpe magnetic chuck, Acu-Rite Qwikcount-II digital readout, S/N: 2219-SCM-68

[3] 6” x 18” Parker Majestic Power Feed Surface Grinders, power elevation, 6” x 12” Ceramax chucks, SCR controls, S/N’s: 1089-SCM-58; 1092-SCM-58; 1722-SCM-65

6” x 18” Parker Majestic Power Feed Surface Grinder, power elevation, 6” x 10” magnetic chuck, S/N: 2035-SCM-67

14” x 40” Brown & Sharpe #3 Universal Cylindrical Grinder, motorized work head, motor speed control


Clamco Mdl. 851 Heat Shrink Tunnel, 15” wide, entry conveyor, S/N: 6706, Clamco Mdl. 5124 Seater, S/N: 2472


30” Jones & Lamson “Epic 30” Comparator, 8-1/2” x 32” table, reflection attachment, S/N: E42127

Wilson Rockwell Mdl. 4JR Hardness Tester, S/N: 4JR-821


Vulcan Mdl. 3-550 Bench Furnace, S/N: 5493306

Trinco Mdl. 20/CDB Reach-In Shot Blast Cabinet, S/N: 74127-14

11” x 11” Advanced Rotary Table

[2] Lexco Heavy Duty Die Lift Carts

1000# Presto Mdl. M-66 Die Lift Cart

1000# Presto Mdl. H166 Die Lift Cart, S/N: XP9016-2

7” Siquorney Sensitive Bench Drill, S/N: M-100269-7

Tennsmith Mdl. SR24 20ga. x 24” Sheet Metal Roller, S/N: 06706

18” x 12’ Motorized Conveyor

Mdl. 14511 5” Motorized Incline Conveyor, S/N: 16511/11

Power Strapping Machine


Miscellaneous Items Throughout, including: assorted inspection items, rolling carts, scales, wood top work benches, rolling wire racks, pallet jacks, bench vises, drill cabinets, double door storage cabinets, radius dressers, rotary tables, sine plates, Dumore grinders, radius dressers, Demag units, indexers, 6” bench shear, rolling tool cabinets, etc.



Auctioneer License Information:

    Auction Listings provided by Although the information published herein is from sources deemed reliable, expressly disclaims any liability for errors, omissions or changes regarding any information provided for this auction. Potential buyers are urged to verify auction date, time, and content directly through the auctioneer's website or by contacting the auctioneer directly. The terms and conditions of the auction may or may not be published in this listing. ALL TERMS AND CONDITIONS AND OTHER ANNOUNCEMENTS MADE THE DAY OF THE AUCTION ARE BINDING AND TAKE PRECEDENCE OVER ANY INFORMATION FOUND HEREIN.