CLOSE
( E-Mail, User ID, or Auctioneer ID )
(Uncheck if using a shared computer)


Auction Information
Auctioneer Schulman Auction & Realty, LLC 816-455-5520
Auction Date May 03 Auction
Location
Grey Oaks Commons Center
SE Corner, Squid Prints Offices
Kansas City, MO
Time 07:00PM
Auctioneer's Other ListingsE-mail AuctioneerAuctioneer's Web Site
View Full Photo Gallery
  • Lot# 5 - Collins 30S-1 Amplifier, WE, 22

    Lot# 5 - Collins 30S-1 Amplifier, WE, 22

  • Lot# 6 - Collins 32S-1 Transmitter, WE

    Lot# 6 - Collins 32S-1 Transmitter, WE

  • Lot# 7 - Collins 516F-2 Power Supply, WE

    Lot# 7 - Collins 516F-2 Power Supply, WE

  • Lot# 8 - Collins 75S-1 Receiver, WE

    Lot# 8 - Collins 75S-1 Receiver, WE

Auction Listing
AuctionZip Auctioneer ID# 29301
ONLINE BIDDING ONLY - Click here for the full searchable catalog with images 

The start of Spring brings with it a fantastic auction with a lot of great vintage as well as newer amateur gear, many antique radios including some early crystal and one tube regen sets. Also featured is some great test equipment, slotted lines and microwave wave guides. All of this, plus a lot more. Over 350 LOT's, there is something for everyone! This is just a sampling, see the full catalog for the big picture: HAM EQUIPMENT: Collins 32S-1, 75S-1, 312B-3, SM-2, R-388/URR w/cabinet, 51J-4, rebuilt 30S-1. EF Johnson Viking Ranger electronically restored by Chuck Hurley, K1TLI, Viking Valiant, Viking Thunderbolt Amplifier, Viking 6N2, Viking KW Matchbox. RL Drake TR-4, T-4XB, SW-4A, MN-2000, R8B, TR7 Complete Station. Atlas 210X, 215X w/206 VFO, 350-XL. Ten-Tec Omni Transceiver. Swan 250, 270B, Astro 102BX, 100MX, Astro 150, 100MXA. Cubic Astro 150, 150A 103, ST-2B, 1500ZA Amp. Hallicrafters SR-400A Cyclone III, SR-160. Hammarlund HQ-110, HQ-110A, HQ-170, HQ-170A, HC-10 SSB Adapter. Heathkit Mohawk Receiver, Apache Transmitter, HW-18-1, SB-104, HW-16. Stewart Warner R-390A/URR, Navy CV-591/URR, Hoffman AU-64 SSB Converter. Gonset Communicator III, 903A 2M Amp. Some of the “newer” gear includes: Yaesu FT-897D, FT-1000MP MARK-V Field Transceiver. ICOM IC-764PRO, IC-746PRO III. Kenwood TS-520S Complete Station, TS-700A. Dentron Super Tuner, Super Super Tuner. Racal RA6790/GM. Ameritron AL-80B Amp. Bird Tenuline 2 kW 30 dB Attenuator/Dummy Load. ANTIQUE RADIOS: Kennedy Type 281 receiver, type 521 two stage amplifier. Breting 14, 14AX. Audiola One Tube Regen, Paramount One Tube Regen, Canadian Westinghouse 801 Tombstone, Philco, Sonora, Stewart-Warner, Brunswick, Kolster, Arvin, Atwater Kent, RCA, Zenith portables, and many more. TEST EQUIPMENT: Hewlett Packard 3310B, 204C, 432A, 400FL, 6215A, 6216A, 6234A, 6269B, 8640B, 8672A, 400D, 3575A, 5345A. Lambda power supplies, Marconi TF-1066B, Slotted lines from various manufacturers, Many, many wave guides and associated parts. Much, much more. OTHER ITEMS: ER Mag dating back to 2000, frequency standards, mics, tubes and much more!

ONLINE BIDDING ONLY - Click here for the full searchable catalog with images

CATALOG TEXT BELOW:
1 - PAYMENT! At the conclusion of this auction, the credit card you used to register with will automatically be charged for your purchases. A PAID invoice will be emailed to you. Please be sure that the card you used to register has sufficient funds/credit limit available.

2 - UPDATED SHIPPING INFO! IMPORTANT, PLEASE READ IF YOUR ITEMS ARE TO BE SHIPPED!
All packing / shipping will be handled by The UPS Store 2923, 5400 Johnson Dr., Mission, KS 66205, where the owner has learned to properly pack and ship vintage electronics equipment as a result of handling hundreds of items from our auctions. If you have any questions or would like a shipping estimate prior to bidding, please call Eric directly at 913-722-1146. All auction items will have their dimensions and weights clearly listed in the auction description.
To efficiently handle and process all the orders that are shipped from our auctions (which is about 80-90% of what we sell) our shipper has come up with the following guidelines to allow you to make better informed decisions when you are bidding and require shipment. Nothing is set in stone, as these are only guidelines. There are always special circumstances and you can request your items to be packed differently, if you so choose.
Auctions end on Thursday evening, and all items that are to be shipped will be picked up the following Monday and Tuesday. Please note that someone must be first, and someone has to be last. Packing and shipping of these orders can take from one to two weeks, so please be patient. You can always call the number given above for a status update. Usually, orders with only one item (unless it’s a freight item) are packed and shipped first. When your order is ready to ship, you will get a call and/or an email from our shipper and you will pay them directly.
The following is what you can expect, unless you contact the shipper with alternative instructions:
*All items will be bubble wrapped or poly bagged.
*Weight up to 10 lbs., void fill will be used.
*10 to 40 lbs., double bubble wrap and void fill will be used.
*40 lbs. and over, Styrofoam planking and/or double boxing will be used.
*Anything over 150 lbs. must be shipped freight. Our shipper will determine the most cost-effective way to get your items to you. Please realize that if you paid $10 for an item, it may cost considerably more to ship due to the weight and overall dimensions. So, if there is any doubt, please get an estimate before bidding.
IMPORTANT NOTE: If you are going to be out of town or unavailable after the auction, please call our shipper and let them know when you’ll be back so that they have a better idea of when to get your items ready for shipping. Also, if you are contacted by them (either by phone or email) and don’t respond within 5 business days, they will automatically ship your items to you IF they have your payment information on file from a previous auction shipment.

3 - PREVIEW/PICKUP! Preview date is 4/28 from 9AM to Noon. PICKUP will be on SUNDAY 5/6 from Noon to 3PM. Please NOTE that this will be on a Sunday instead of our normal Saturday pickups. See "Auction Details" for more information.

4 - EQUIPMENT TESTING! When possible, we do our best to test the equipment we sell so that you will know exactly what you are bidding on. That being said, we perform basic tests such as overall power consumption, receiver sensitivity, transmitter power output, etc. Depending on what it is we’re selling, other tests might be warranted. If there is a certain type of test you’d like performed on a particular lot, just let us know and we’ll do our best to take care of you. Please note that we do not usually go through every single function on a particular piece of gear (in some cases, that would take a considerable amount of time) but rather the functions that will tell us (and you) whether or not the piece of equipment your interested in, is in basic working order. Does it transmit? Does is receive? Does that piece of test gear you’re wanting to bid on do what it is supposed to do? All this with supporting data and photos when appropriate. For more information and specifics about our test bench, please cut and paste the following link into your browser: http://www.schulmanauction.com/vintage-electronics/test-bench-equip-testing/

5 - Collins 30S-1 Amplifier, WE, 220V Collins 30S-1 Amplifier, WE, 220V. This is a true work horse of an amplifier. From the collection of Bill Dennison, this amplifier was given to him by a Springfield, MO area broadcast engineer who did all the modifications relating to a new, larger plate transformer and solid state rectification, as shown in the photos. The amp tested out well, with no problems. The legal limit was obtained (and then quite a bit more) into a dummy load on all bands. One of Bill's friends who recently (within the last year) used this amp at his QTH said that it could run all day and not even break a sweat! With the size of that transformer, no wonder! We used a Johnson Ranger transmitter (also found in this auction) for our own testing purposes. It is in good cosmetic condition as well. The original 30S-1 lettering on the bottom right has been replaced, as shown. The plate transformer and other electronics are sitting on a slide out deck (see photo) for easy access. Also, the amp itself is resting on top of a custom made deck on wheels, which makes moving this 200+ pound beast quite easy. The amp is not physically attached to this base. Note that the extra weight is due to the upgraded transformer. (transformer size is approximately 7.5"W x 7.5"D x 10.5"H) Approx. Weight: Over 200 pounds Approx Dims: 30.5 x 17 x 18.75 Approx. Dims of base: 17x16x6

6 - Collins 32S-1 Transmitter, WE Collins 32S-1 Transmitter, WE. Nice looking transmitter, with hardly any cosmetic blemishes to the case. The trim ring looks good as well, although it does appear to have a slight bit of yellowing. Electrically, there are only 2 crystals supplied, one for 7.2 Mc and the other for 3.8 Mc. Tune up and output on 40M was only about 25W. On 80M, there was no output. Power consumption at 115VAC during standby was approximately 100W and during transmit about 280W. From the collection of Bill Dennison. There is no serial number on the Collins tag on this unit. However, it was said to be a very early serial number set, but I can not verify this. Original manual included. Approx. Weight: 15 lbs. Approx. Dims: 15x13x8

7 - Collins 516F-2 Power Supply, WE, No Speaker Collins 516F-2 Power Supply, WE, No Speaker. Cabinet is in very nice condition, however, there is some yellowing to the trim ring. This power supply is in working condition and appears to be original. The screw from the front grill, upper left, does not have a nut, so it will not fasten down. The screw will be included with the power supply in a zip loc bag. From the collection of Bill Dennison. s/n 21965 Approx. Weight: 31 lbs. Approx. Dims: 12x10x8

8 - Collins 75S-1 Receiver, WE Collins 75S-1 Receiver, WE. Another nice looking cabinet with very minor yellowing to the trim ring. The receiver draws about 52W at 115VAC during receive. Receiver sensitivity is about 0.2 uv on all bands. The power cord is brittle and crumbling, so I would recommend rewiring. We tested this unit with an in-house power cord, and did not use the one supplied with the rig. Also, there is no insulation material around the inside of the antenna jack. s/n: 1003, original manual included. Approx. Weight: 16 lbs. Approx. Dims: 15x13x8

9 - Collins 312B-3 Speaker, WE Collins 312B-3 Speaker, WE. Nice looking speaker in good to very good condition, as shown. The trim ring has not yellowed and the speaker is in working condition. Approx. Weight: 4 lbs. Approx. Dims: 10x8x8

10 - Collins SM-2 Dynamic Microphone Collins SM-2 Dynamic Microphone. Very good condition, high impedance mic for your Collins station. The only scuffs/paint loss is shown in the last photo, which is located on the bottom side of the mic cylinder. Great working condition too! s/n 2313. Includes 3/8 inch phono connector as shown.

11 - Collins R-388/URR Receiver Collins R-388/URR Receiver in overall good condition. Some of the lettering on the front panel has faded or been worn. Electrically, the set draws about 90W during receive. See YouTube video above. It appeared that stronger stations were easier to pull in than the weaker ones. Controls are a bit dirty/noisy and will need to be addressed. s/n: 1602 Approx. Weight: 47 lbs. Approx. Dims: 19x16x11

12 - Collins R-388/URR Receiver w/Cabinet Collins R-388/URR Receiver w/Cabinet. Very nice looking custom cabinet from California Chassis, Co. The front panel is in good to very good condition. Electrically, the unit draws about 82W at 115VAC. Receive is OK, however, not very sensitive, and most of the controls, including the band switch are very noisy and will need adjusting/cleaning. From the collection of Bill Dennison. s/n: 2274 Approx. Weight: 65 lbs. Approx. Dims: 22x15x13

13 - Collins 51J-4 Receiver Collins 51J-4 Receiver in good to very good condition, cosmetically, as shown. This rig draws about 88W during receive. See YouTube videos above. s/n: 1493 Approx. Weight: 47 lbs. Approx. Dims: 19x16x11

14 - Yaesu FT-897D, LDG 897 Tuner, FTL Meter, & FP-30 Yaesu FT-897D, LDG 897 Tuner, FTL Meter, FP-30 power supply and more! You're bidding on a complete station, in very good to excellent condition (one missing rubber foot), with many extras. First, the 897D is in great working order with full power out on all modes. All of the accessories are in good working condition as well. There are two Inrad filters installed, #705 500 Hz, and #712 300 Hz. Also included are the following: LDG 897 Antenna Tuner, installed (this may be removed from the rig for shipping purposes) FP-30 Power Supply, installed (the original bottom panel of the rig is included if you wish to remove the power supply) LDG FTL Meter Tigertronics SignaLink USB Sound Card (wired for the 897D) CT-62 CAT Interface Cable HM-31 Hand Mic (2) 12V power cables IEC Power Cord Original boxes and packing materials, as shown. 3 ring binder with complete documentation for all of the above. Transceiver s/n: 9G077 Approx. Total Weight: 30 lbs. Approx. Total Dims:24x24x20

15 - Yaesu FT-1000MP MARK-V Field Xcvr. & Extras Yaesu FT-1000MP MARK-V Field Xcvr. & Extras. Absolutely beautiful, complete station. This transceiver is in very good to excellent condition, as shown, and working all the way. The only issue we found was that there seemed to be an intermittent short in the hand mic cord. Easy fix or just a replacement or desk mic will do the trick. Full power out in all modes. Fully decked out with Inrad filters, including: #704 -- 250Hz 455KHz CW 8-pole crystal filter #720 -- 2000Hz 455KHz SSB 8-pole Collins filter #721 -- 500Hz 455KHz CW 8-pole crystal filter Inrad Roofing Filter Also included with the transceiver are the following: OEM TCXO installed SP-8 External Speaker and connecting cable for radio FH-1 Remote Control Keypad DVS-2 Digital Memory Recorder and original box MH-31 Hand mic IEC power cord Original manual (plus 2 bound copies, not shown) Transceiver s/n: 4L260055 Approx. Weight: 34 lbs, xcvr Approx. Dims: 17x16x8, xcvr Approx. Weight: 7 lbs., speaker Approx. Dims: 12x8x6

16 - ICOM IC-756 PRO III Transceiver & Extras ICOM IC-756 PRO III Transceiver & Extras. Another great, classic rig in very good to excellent condition and working well, with full power out on all modes. Another complete station! With this radio you will also be receiving the following additional items, as pictured: ZLP Electronics TTL CAT and cables WinKeyer USB - by K1EL and cables HM-36 Hand Mic 12VDC Power Cable Original box and packing materials for transceiver Instruction Manual and schematics s/n: 3201522 Approx. Weight, boxed: 26 lbs. Approx. Dims, boxed: 17x16x8

17 - Icom IC-746 PRO HF/VHF Transceiver & Power Supply COM IC-746 PRO HF Transceiver & PS-125 Pwr Supply. Very nice looking and well cared for radio! Receive sounds very good and transmit works well. Made a few SSB contacts with good audio reports, and CW carrier output was about 70W. IEC power cord included. Note: rear panel was labeled by the seller. Xcvr. s/n 0207511 PS s/n 0210849 Approx. Weight, total: 26 lbs. Approx Dims, Xcvr: 13x12x5

18 - Kenwood TS-700A 2M All Mode Transceiver Kenwood TS-700A 2M All Mode Transceiver. This 2M rig has great receive, but power output is negligible, as I was unable to get a reading on my 0-30W VHF watt meter. However, as you can see from the spectrum analyzer display (last photo), there is a signal present. It was a 144.5 MHz signal, and the transceiver dial was fairly accurate. The controls are noisy and will need to be cleaned, and the MHz knob light is out. Kenwood hand mic, power cord and original manual and box are included. s/n: 312478 Approx. Weight: 23 lbs. Approx. Dims: 16x13x7

19 - Yaesu FT-1802 M/E VHF FM Transceiver Yaesu FT-1802 M/E VHF FM Transceiver. This rig looks hardly used. Works great, includes mounting hardware, mic, power cable, documentation and original box with packing materials. s/n 8M362443 Approx. Weight: 6 lbs. Approx. Dims: 14x10x4

20 - Yaesu FT-1900 R/E VHF FM Transceiver Yaesu FT-1900 R/E VHF FM Transceiver. Another great looking, lightly used 2M rig. In good working condition with mounting hardware, mic, documentation, power cable and original box. s/n: 1EG80761 Approx. Weight: 6 lbs. Approx. Dims: 14x10x3

21 - Yaesu FT-252 VHF Handheld Transceiver Yaesu FT-252 VHF Handheld Transceiver, in good working condition, as shown. Includes antenna, battery, charger, manual and belt clip (not shown). Original box and packing materials. s/n: 3E011260 Approx. Weight: 2 lbs. Approx. Dims: 9x6x3

22 - Kenwood TS-520S, VFO, Tuner, Speaker & D-104 mic Kenwood TS-520S, VFO, Tuner, Speaker & D-104 mic. A complete, vintage Kenwood station, in good to very good cosmetic condition. The speaker has a bit of fading/yellowing to the sides, otherwise, very nice looking gear. The transceiver is in good working condition, as well as the AT-200 tuner, the VFO-520S and the SP-520 speaker. Transmit output was approximately 80W carrier out. Power consumption in standby was about 33W and during transmit, about 240W, both at 115VAC. The only thing we noticed with the transceiver was that some of the controls were dirty/noisy and will need to be cleaned. A fully functional D-104 mic with amplified base and Heil element is included and wired for this rig. A VFO cable, and and extra cable and separate connectors are included. Extra panel fasteners and power cord included as well. Binder with copies of the manuals for the above, not shown. Approx. Weight, xcvr: 33 lbs. Approx. Dims, xcvr: 17x15x8 Approx. Weight, VFO, Tuner, Speaker: 6, 6, & 4 lbs. Approx. Dims, each: 8x7x7

23 - Kenwood 599D Twins, S-599 Spkr, MC-50 Mic Kenwood 599D Twins, S-599 Spkr, MC-50 Mic. Complete station, in working condition. Very nice set of Twins including the hard to find "transceiver" interface cable and external S-599 speaker. Cosmetically, the faceplates on each piece are in good condition. The cases do exhibit some scratches and scuffs, as shown. Both units work well individually, as well as together, with the supplied interface cable. Upon tune up and transmit in CW, we were able to achieve approximately 80W carrier output at 290W power consumption at 115VAC. The receiver sounds good (see YouTube video), and the speaker is also in good working condition. There is a new set of 6146B's installed. The VHF options are NOT installed. Included is a working MC-50 mic, wired for this radio and copies of the manuals in a 3-ring binder, as shown. Transmitter s/n: 640457 Receiver s/n: 640219 Approx. Weight (xmt): 30 lbs. Approx. Dims (xmt): 14x11x6 Approx. Weight: (rec): 17 lbs. Approx. Dims (rec): 12x11x6

24 - TRIO-Kenwood TS-820X Transceiver TRIO-Kenwood TS-820X Transceiver. Overall good condition cosmetically with minimal wear and tear. Electrically, this rig supplies about 60W carrier output. The controls are dirty/noisy. In standby, power consumption is 30W and during transmit, about 220W. Both, at 115VAC. Power cord included. s/n: 611618 Approx. Weight: 35 lbs. Approx. Dims: 16x14x7

25 - Kenwood TS-820 Transceiver Kenwood TS-820 Transceiver in overall good condition cosmetically. There are some scratches and scuffs, and the handle is missing. The controls, including the VFO are dirty/noisy. The radio is difficult to tune because of this. However, we were able to get about 40W carrier output. Receive works well. During receive, power consumption was about 43W and druing transmit, about 210W. Both at 115VAC. No power cord is included. s/n: 641240 Approx. Weight: 35 lbs. Approx. Dims: 16x14x7

26 - Kenwood TS-820S Transceiver, parts or restore Kenwood TS-820S Transceiver, parts or restore. This rig blows fuses, AC line appears to be shorted, possible transformer issue. No power cord included. s/n: 760322 Approx. Weight: 35 lbs. Approx. Dims: 16x14x7

27 - Johnson Viking Ranger, restored by Chuck Hurley E.F. Johnson Viking Ranger, restored by Chuck Hurley in October 2015. Please note that ONLY electrical restoration was done to this rig. Chuck did not refinish or restore the cabinet, it is still in original, used condition. There has been fewer than 2 hours use on this rig since the restoration. See PDF file link for work done to this set. We've been using this rig to test other amplifiers in this auction with absolutely no problems. All bands are working and carrier output is approximately 25-35W. A photo copy of the manual is included. s/n: 61706 Approx. Weight: 43 lbs. Approx. Dims: 15x12x9

28 - Johnson Viking Valiant Transmitter Johnson Viking Valiant Transmitter in good cosmetic condition, as shown. Minor scuffs and scratches are present. Front panel and tuning dial and knob are in very good condition. No problem tuning this rig up with about 150W carrier output. Power consumption when idle is about 150W at 115VAC. From the collection of Bill Dennison. Approx. Weight: 73 lbs. Approx. Dims: 21x14x12

29 - Johnson Viking Thunderbolt Amplifier, 220V Johnson Viking Thunderbolt Amplifier, 220V. Yes, we have another one in this auction! This Thunderbolt was tested with the Ranger transmitter in the previous lot. With only 5-10W of drive, this amp produced about 500-600W of carrier output. The only thing we noticed was that when the drive was removed, there was excessive current draw. Since this amp has a fairly new pair of matched Taylor 4-400C's, we're guessing that the set needs to be neutralized. The procedure for neutralization can be found in the PDF of the manual in the link above as well as the manual copy that is included with this amp. Otherwise, this is a nice looking amp with some minor scuffs and scratches. The front panel looks great, as do the meters. The upper left corner on the front panel, does have a ding, as shown in the last photo. Control cable and power cord is included. Approx. Weight: 130 lbs. (yes, definitely a boatanchor) Approx. Dims: 21x16x12

30 - Johnson Viking 6 N 2 Transmitter & VFO Johnson Viking 6 N 2 Transmitter & VFO. Great looking pair! A few minor scuffs and scratches. These are untested, as there is no power supply included. Approx. Weight: 12 lbs. total Approx. Dims: 13x10x9 (xmtr), 5x5x4 (vfo)

31 - Johnson Viking KW Match Box & Coupler Johnson Viking KW Match Box & Coupler, in good overall condition as shown. This is the BIG one, complete with directional coupler, meter and original manual Approx. Weight: 22 lbs. Approx. Dims: 17x12x12

32 - Ten-Tec Century 21 CW Xcvr, Keyer, Xtal Calibrator Ten-Tec Century 21 CW Xcvr, Keyer, Xtal Calibrator. This set is in very good to excellent condition cosmetically. Medium power CW transceiver with model 276 crystal calibrator and model 670 keyer. Carrier output during transmit on 80/20 meters was approximately 20W, and 10W on 15/10 meters. Power consumption in standby is 16W and 90W during transmit at 115VAC. s/n: 570-2204 (xcvr) / Original manual included. Approx. Weight: 16 lbs. Approx. Dims: 13x12x6

33 - Knight T-60 Transmitter Knight T-60 Transmitter in very good cosmetic condition. Approximately 30W carrier output on all bands with about 90W power consumption at 115VAC. Manual included. Approx. Weight: 12 lbs. Approx. Dims: 12x7x6

34 - Pair of 4-400A Tubes used in Thunderbolt Amp Pair of 4-400A Tubes made in France. These were the tubes originally used in the Thunderbolt amp listed above. They are in good working order. The reason for the replacement was that the owner wanted a new pair of matched tubes in the amp. We don't know how many hours are on these, but they don't look heavily used. Approx. Weight: 1 lb. each, boxed Approx. Dims: 10x10x6

35 - Johnson 250-39 T-R Switch Johnson 250-39 T-R Switch. Looks like this unit just came out of the box. Great shape! Copy of the 2 page manual included. In working condition. Approx. Weight: 4 lbs. Approx. Dims: 6x4x4

36 - Ameritron AL-80B Amplifier & Used Spare 3-500Z Ameritron AL-80B Amplifier & Used Spare 3-500Z tube. Great little amplifier, in used but working condition. About 25W of drive produced approximately 200W+ carrier output. Power consumption at idle was about 140W at 115VAC. This amp is wired for 120VAC. The spare tube was originally used in this amp, however, it was replaced because it was a bit soft on 10 and 12M, but it was still in working condition. It is included as a backup, if needed. Original instruction manual included. s/n: 15986 Approx. Weight: 60 lbs. Approx. Dims: 15x15x9

37 - Gonset Communicator III Transmitter-Receiver Gonset Communicator III Transmitter-Receiver. Very sharp looking transceiver, complete with T-17-B military hand mic, power cord, manual and Civil Defense emblems on each side! We were able to successfully tune this set up with about 3W output. The crystals supplied as shown, are included. Power consumption during receive is about 68W and during transmit, 86W. Approx. Weight: 20 lbs. Approx. Dims: 12x12x9

38 - Gonset 903A, 2 Meter RF Power Amplifier Gonset 903A, 2 Meter RF Power Amplifier. Here's one that you don't see every day. This amp does power up with approximately 60W power consumption with the filament on. With only 2-3W input using an HT, the amp produced about 150-160W carrier output. This amp is wired for 120VAC. Two copies of the manual are included as well as a spare Eimac 4X150A tube, with a good filament. The tube does have a ding on one side. A link to the manual on the BAMA site is included above, as well. Approx. Weight: 60 lbs. Approx. Dims: 16x13x9

39 - Heathkit Mohawk & Apache, SSB Adapter, Spkr, MORE! Heathkit Mohawk & Apache Complete Station! You are bidding on an absolutely beautiful, complete, Heathkit station. Since they've been together for quite a while, you're buying it all! Included are the following: Apache TX-1 Transmitter, Mohawk RX-1 Receiver, SB-10 SSB Adapter, and the hard to find matching AK-5 speaker for the Mohawk. There are also all of the cables, tx/rx relay, Astatic D-104 with T-UG8 amplified stands and denim, embroidered covers for the transmitter and receiver (which explains why they're in such great shape). Original TX-1 manual, and copies of all other manuals. Electrically, the receiver is in great working condition on all bands with at least 0.5 uv sensitivity. Power consumption is 70W at 115VAC. The transmitter is working well on all bands, with about 60W CW output. Standby power consumption is about 120W and during transmit, about 320W, both at 115VAC. There are a few minor scuffs and scratches, but overall I would rate all of the equipment as very good to excellent cosmetic condition. You'd be hard pressed to find another COMPLETE station in this good of shape! MIc, speaker and SSB adapter in working condition. Approx. Weight, TX: 95 lbs Approx. Dims, TX: 19x16x11 Approx. Weight, RX: 65 lbs Approx. Dims, RX: 19x16x11 Approx. Weight, SSB: 8 lbs Approx. Dims, SSB: 12x10x7 Approx. Weight, SPKR: 6 lbs. Approx. Dims, SPKR: 12x9x6

40 - Drake R8B Communications Receiver Drake R8B Communications Receiver. If you missed the one in our last auction, well here is another for your consideration. Very good condition cosmetically, as shown. This receiver sounds great and appears to work just as well. See YouTube video above. s/n 8C12940046 IEC power cord included. Approx. Weight: 13 lbs. Approx. Dims: 13x12x6

41 - Drake TR7 Xcvr. Complete, w/ PS7, RV7, MS7 & MN75 Drake TR7 Xcvr. Complete Station! w/ PS7, RV7, MS7 & MN75. Cosmetically, these items are in good to very good condition with only minor marks from wear and use. Included are the following: Drake TR7 transceiver & PS7 power supply. Both in good working condition. Approximately 100W carrier output on all bands. Receiver sensitivity is good. Power consumption is 68W in standby and 180W during transmit at 115VAC. Both transceiver and power supply include the optional cooling fans, as shown. Approx. Weight: 20 lbs. xcvr, s/n 5645 Approx. Dims: 14x12x5 xcvr. Approx. Weight: 30 lbs. ps, s/n 3878 Approx. Dims: 14x12x5 ps Drake RV7 remote VFO in good working condition. This VFO is missing the rear rubber feet, as shown. Approx. Weight: 4 lbs. Approx. Dims: 7x7x5 Drake MS7 external speaker in good working condition. Approx. Weight: 3 lbs. Approx. Dims: 7x7x5 Drake MN75 antenna tuner with Balun Designs Model 4245db - 5kw balun for Drake antenna tuners. This unit is in good working condition. Approx. Weight: 7 lbs. s/n 786 Approx. Dims: 14x9x5

42 - Drake PS7 Power Supply Drake PS7 Power Supply in good working condition. Tested with TR7 in previous lot. This unit does NOT include the optional cooling fan. s/n: 5864 Approx. Weight: 30 lbs. Approx. Dims: 14x12x5

43 - SCD Nucletudes 2-100 MHz 25W Amplifier, France SCD Nucletudes 2-100 MHz 25W Amplifier, France. This appears to be a low noise, French made linear power amplifier for 2-100 MHz. About 25W max out. Model ARS-1-40-50. No much information was found on the web (ok, not any that we could find). We used a signal generator to test this amp since we didn't want to blow anything up for lack of a manual. The results were that the output varies +/- 3 dB from 2-100 MHz. The input signal was 30 Mhz at +3 dBm with about 20W out according to our meter, and 25W out according to the panel meter. So, we're in the ballpark. The scope output is shown as well as the meter readings. IEC power cord included, but not shown. Approx. Weight: 40 lbs. Approx. Dims: 17x17x8

44 - R.L. Drake TR-4 Transceiver R.L. Drake TR-4 Transceiver. Beautiful rig here. The cabinet and front panel are in very good condition, with hardly a scratch to be found. Electrically, this set produces 100W carrier output on all bands except 10M, which is about 25W out. Power consumption in receive is 116W and during transmit is about 312W, both at 115VAC. s/n: 23076 Approx. Weight: 17 lbs. Approx. Dims: 15x11x7

45 - R.L. Drake T-4XB Transmitter R.L. Drake T-4XB Transmitter as shown, non-operational. Cosmetically in good to very good condition. s/n: 16910 Approx. Weight: 15 lbs. Approx. Dims: 12x11x6

46 - R.L. Drake SW-4A Short Wave Receiver R.L. Drake SW-4A Short Wave Receiver. Works well on all bands. Power consumption is approximately 35W at 115VAC. Great sensitivity and good to very good cosmetically. There is a small ding to the lower front right corner, as shown in the last photo. The front panel displays the following mark: "Designed Especially for Radio New York Worldwide". s/n: 0452 Approx. Weight: 14 lbs. Approx. Dims: 13x11x6

47 - R.L. Drake SW-4A Short Wave Receiver, restore R.L. Drake SW-4A Short Wave Receiver for restoration. In good cosmetic condition, but unable to pull in any stations. It does have audio, as evidenced by noise heard, during operation of the dials and switches. The front panel displays the following mark: "Designed Especially for Radio New York Worldwide". s/n: 2536 Approx. Weight: 14 lbs. Approx. Dims: 13x11x6

48 - R.L. Drake MN-2000 Matching Network R.L. Drake MN-2000 Matching Network in good working as well as cosmetic condition. Approx. Weight: 15 lbs. Approx. Dims: 17x11x6

49 - Atlas 210x SSB Transceiver & 220 CS Power Supply Atlas 210x SSB Transceiver & 220 CS Power Supply. This is probably one of the cleanest 210's I've seen in a long time. It has very sensitive receive on all bands but it will not transmit. Approx. Weight: 18 lbs. Approx. Dims: 16x11x6

50 - Atlas 215x Xcvr., 206 VFO & AR 117 Power Supply Atlas 215x Xcvr., 206 VFO & AR 117 Power Supply. Great looking station with the hard to find VFO! The receiver on this set is excellent, with a sensitivity of about 0.3 uv. On transmit, we were only able to produce about 5-8W output. The VFO is in working condition, however, the frequency display is off by quite a bit and will need adjustment and/or servicing. Approx. Weight: 25 lbs, xcvr & PS Approx. Dims: 16x11x6 Approx. Weight: 5 lbs., VFO Approx. Dims: 10x6x5

51 - Atlas 350-XL Xcvr., VFO 305 & 350-PS Power Supply Atlas 350-XL Xcvr., VFO 305 & 350-PS Power Supply. As shown. The 305 VFO is a plug in as shown on the front panel. The transceiver can hear noise, but no signals present. This could be due to the fact that the VFO is not on frequency and the readout is very sporadic. Transmit was not tested due to the above. Power consumption in standby is about 30W at 115VAC. Approx. Weight: 20 lbs. xcvr. Approx. Weight: 25 lbs. power supply Approx. Dims: 16x13x7, each unit

52 - Atlas 350-PS Power Supply Atlas 350-PS Power Supply. This unit is in good working condition and draws about 70W at idle. It does not have a power connector that plugs into the radio, so you'll have direct wire or make your own. It was tested successfully on the previous lot in this auction. Approx. Weight: 25 lbs. Approx. Dims: 15x13x7

53 - Ten-Tec Omni Tranciever, Ext. VFO & Power Supply Ten-Tec Omni Transceiver, Ext. VFO 243 & 225 Power Supply and Speaker. Nice station here, but it will need some servicing. The receiver is "noise" only and the on-board VFO has control and display problems. The display readout is very sporadic and does not correspond to any band or switch settings. The power supply is in working condition and draws about 70W at 115VAC. The external VFO was not tested due to the issues stated above. All of this gear is in good to very good condition, cosmetically. With some TLC, it could make someone a fine, vintage station. Approx. Weight: 15 lbs. xcvr, 18 lbs., power supply, 5 lbs. VFO Approx. Dims: 14x8x7, 8x7x14, 8x8x6

54 - Yaesu YC-601 Digital Display Yaesu YC-601 Digital Display. Powers on, nice bright display. Very clean unit. When the band dial was switched to the various bands, all associated frequencies were displayed correctly. No further testing was performed. Cable included, as shown. Approx. Weight: 5 lbs. Approx. Dims: 10x8x4

55 - Icom IC-781 HF Transceiver, for repair Icom IC-781 Transceiver, for repair. Great rig, but it's going to need some work. No Rx or Tx. However, the good news is the display appears to be bright and clear. I didn't detect any burn in from what I could see. The VFO's appear to work as well. There is normal wear on this rig, as some of the button lettering is worn from use. You will need to provide an IEC standard power cord. S/N: 02438 Approx. Weight: 51 lbs. Approx. Dims: 17x16x6

56 - Icom IC-761 HF Transceiver, for repair Icom IC-761 HF Transceiver, for repair. Another rig that is in need of some TLC. Receive appears to work well (see YouTube video), however, transmit will only work on 40M with about 20W carrier output. s/n 2318. Some wear on this rig with worn lettering on the buttons and a ding to the case on the right hand rear (looking at it from the back). You will need to supply your own IEC standard power cord. Approx. Weight: 40 lbs. Approx. Dims: 19x16x7

57 - Yaesu FT-980 HF Transceiver, for repair Yaesu FT-980 HF Transceiver, for repair. This set has good receive (see YouTube video) however, no Tx. As you can see in the photos, there is noticeable corrosion on the back of the rig to the power supply and amplifier unit, which could be the culprit. The left most meter light is out as well. s/n: 090072 You will need to supply your own IEC standard power cord. Approx. Weight: 40 lbs. Approx. Dims: 17x15x7

58 - Galaxy GT-550 Xcvr, SC-550 Power Supply & Speaker Galaxy GT-550 Xcvr, SC-550 Power Supply & Speaker Very nice looking pair. There are a few scratches and scuffs to the cases, as shown. Receive was good on all bands with about 90W power consumption at 115VAC. We were able to tune it up and produce a CW carrier of approximately 35-40W on 40/80M and less than 10W on 10M. Power consumption during transmit was about 280W. This rig does have the crystal calibrator and the VOX card installed. Approx. Weight, total: 40 lbs. Approx. Dims, Xcvr: 13x11x7 Approx. Dims, PS: 10x10x7

59 - Swan 700CX SS-16B Special SSB Transceiver Swan 700CX SS-16B Special SSB Transceiver. Very nice looking, clean unit. This radio produces about 80W carrier output at 115V. Power consumption during transmit is 230W and during receive is 95W. Original manual included. Approx. Weight: 18 lbs. Approx. Dims: 13x11x7

60 - Swan 250 SSB 6M Xcvr. & 117 XC Power Supply Swan 250 SSB 6M Xcvr. & 117 XC Power Supply. As shown in the photos, there was a round military style 10 pin connector (possibly AMPHENOL - 5015) added between the power supply and transceiver. Both units appear to work, with about 30W carrier output during transmit. Power consumption was about 270W at 115VAC. Approx. Weight, Xcvr: 17 lbs. Approx. Dims, Xcvr: 13x10x7 Approx. Weight, PS: 19 lbs. Approx. Dims, PS: 10x8x7

61 - Swan 270B SSB Transceiver & 117 XC Power Supply Swan 270B SSB Transceiver & 117 XC Power Supply. The power supply blows fuses, and the transceiver is NOT tubed, so working condition of transceiver was not tested. The power supply was tested with another Swan rig. Approx. Weight, xcvr: 22 lbs. Approx. Dims, xcvr: 13x11x7 Approx. Dims, PS: 19 lbs. Approx. Dims, PS: 11x8x7

62 - Swan Astro 102BX Xcvr, PSU-6, & ST-3 Tuner Swan Astro 102BX Xcvr, PSU-6, & ST-3 Tuner. Nice looking station! Complete with 160M-10M transceiver, PSU-6 power supply/speaker and ST-3 antenna tuner. All bands produce at least 60W carrier output ("10D" band slightly less) and receive sensitivity is approximately 0.3 uv on all bands. The antenna tuner is in good working condition. Cosmetically, each unit is in good to very good condition with only minor scuffs and scratches. You will need to provide a standard IEC power cord for the power supply. s/n 174, xcvr. s/n 394, ps s/n 621, tuner Approx. Weight, xcvr: 24 lbs. Approx. Dims, xcvr: 15x13x6 Approx. Weight, ps: 20 lbs. Approx. Dims, ps: 12x10x8 Approx. Weight, AT: 8 lbs. Approx. Dims, AT: 10x10x4

63 - Swan Astro 102BX Xcvr, PSU-6, & ST-3 Tuner Swan Astro 102BX Xcvr, PSU-6, & ST-3 Tuner. Nice looking station! Complete with 160M-10M transceiver, PSU-6 power supply/speaker and ST-3 antenna tuner. All bands produce at least 60W carrier output (160M only 25W) and receive sensitivity is approximately 0.5 uv on all bands, except 160M which is about 5.0 uv. The antenna tuner is in good working condition. There is a non-stock potentiometer directly under the key/mic jack on the transceiver (see 3rd photo). Not sure what it is, but it does not appear to affect the functionality of the radio. Cosmetically, each unit is in good condition with only minor scuffs and scratches. The power supply unit does show some wear on the top of the cabinet as shown in the photos. You will need to provide a standard IEC power cord for the power supply. s/n 418, xcvr. s/n 280, ps s/n 344, tuner Approx. Weight, xcvr: 24 lbs. Approx. Dims, xcvr: 15x13x6 Approx. Weight, ps: 20 lbs. Approx. Dims, ps: 12x10x8 Approx. Weight, AT: 8 lbs. Approx. Dims, AT: 10x10x4

64 - Swan 100MX Transceiver & PSU-5 Power Supply Swan 100MX Transceiver & PSU-5 Power Supply and speaker. This pair is in good working condition with about 50W carrier output on all bands. Cosmetically, there are some scratches and scuffs, but no major flaws. Power consumption during receive is about 47W and during transmit is 190W at 115VAC. Receiver sensitivity is about 0.15 uv. Xcvr. s/n 289 PS s/n 256 Approx. Weight, xcvr: 13 lbs. Approx. Dims, xcvr: 12x10x5 Approx. Weight, ps: 18 lbs. Approx. Dims, ps: 12x10x5

65 - Swan 100MX Transceiver & PSU-6 Power Supply Swan 100MX Transceiver & PSU-6 Power Supply and speaker. Nice looking transceiver, however, the power supply does have some paint loss and corrosion on the left rear, as shown. There is about 60W minimum carrier output on all bands and 0.15 uv receiver sensitivity. The power supply regulator is "soft" as the voltage drops during transmit. You will need to supply your own standard IEC power cord for the power supply. s/n: 617, xcvr. s/n: 257, ps Approx. Weight, xcvr: 13 lbs. Approx. Dims, xcvr: 12x10x5 Approx. Weight, ps: 20 lbs. Approx. Dims, ps: 12x10x8

66 - Swan 100MX Transceiver & PSU-6 Power Supply Swan 100MX Transceiver & PSU-6 Power Supply and speaker. Nice looking rig and power supply. The radio carrier output is 60W minimum on all bands, except 6M, where it's slightly lower. Receive sensitivity is about 0.15 uv across all bands. The flip-up bar on the bottom of the power supply is missing as is one rubber rear foot. You will need to supply your own standard IEC power cord. s/n: 593, xcvr. s/n: 897, ps Approx. Weight, xcvr: 13 lbs. Approx. Dims, xcvr: 12x10x5 Approx. Weight, ps: 20 lbs. Approx. Dims, ps: 12x10x8

67 - Swan Astro 150 Transceiver & PSU-6 Power Supply Swan Astro 150 Transceiver & PSU-6 Power Supply and speaker. Both units are in good to very good cosmetic condition, as well as working condition. Minimum of 60W carrier output on all bands with about 0.1 uv receiver sensitivity. You will need to provide your own standard IEC power cord for the power supply. s/n: 446 xcvr. s/n: 366 ps Approx. Weight, xcvr: 13 lbs. Approx. Dims, xcvr: 12x10x5 Approx. Weight, ps: 20 lbs. Approx. Dims, ps: 12x10x8

68 - Swan 100MXA SSB Transceiver Swan 100MXA SSB Transceiver in good to very good cosmetic as well as working condition. Minimum 60W carrier output on all bands with 0.15 uv receive sensitivity. No power supply included. s/n: 1240 Approx. Weight: 13 lbs. Approx. Dims: 12x10x5

69 - Cubic Astro 103 Xcvr, PSU-6A & ST-3B Tuner Cubic Astro 103 Xcvr, PSU-6A Power Supply/Speaker & ST-3B Tuner. Nice complete station! Cosmetically, in good condition with only minor scuffs and scratches, as shown. There is some paint loss around the speaker grill. Minimum of about 60W carrier output on all bands with about 0.15 uv receiver sensitivity. Power supply and speaker in working condition as well as the antenna tuner. This transceiver has the optional narrow CW filter installed. You will need to supply your own standard IEC power cord for the power supply. s/n: 1030-3010477 xcvr. s/n: 6030-3011680 tuner s/n: 776 ps Approx. Weight, xcvr: 24 lbs. Approx. Dims, xcvr: 15x13x6 Approx. Weight, ps: 20 lbs. Approx. Dims, ps: 12x10x8 Approx. Weight, AT: 8 lbs. Approx. Dims, AT: 10x10x4

70 - Cubic Astro 103 Xcvr, PSU-6A & ST-3B Tuner, parts Cubic Astro 103 Xcvr, PSU-6A & ST-3B Tuner, for parts or restoration. Cosmetically, all units are in overall fair to good condition with some scuffs/scratches and a bit of corrosion to the cabinets. The power supply cabinet is black, the others are gray/cream. The VFO's on the transceiver do not work and there is no transmit or receive. The power supply does show the correct voltages, however, the standard power connector was replaced with a Jones connector. You will need to replace that, in order for this supply to function with the transceiver. The antenna tuner is in working condition. You will need to supply your own standard IEC power cord for the power supply. s/n: 1030-3010465 scvr. s/n: 526 ps s/n: 6030-3041833 tuner Approx. Weight, xcvr: 24 lbs. Approx. Dims, xcvr: 15x13x6 Approx. Weight, ps: 20 lbs. Approx. Dims, ps: 12x10x8 Approx. Weight, AT: 8 lbs. Approx. Dims, AT: 10x10x4

71 - Cubic Astro 150A Transceiver & ST-3B Tuner Cubic Astro 150A Transceiver & ST-3B Tuner. Cosmetically, both units are in good condition with minor scuffs and scratches. The transceiver works well, with a minimum of 60W carrier output on all bands along with 0.5 uv receive sensitivity. The antenna tuner is in working condition. No power supply is included. s/n: 1050-2112859, xcvr. s/n: 6030-3031748, tuner Approx. Weight, xcvr: 13 lbs. Approx. Dims, xcvr: 13x10x4 Approx. Weight, tuner: 8 lbs. Approx. Dims, tuner: 10x10x4

72 - Cubic 1500ZA HF Linear Amplifier Cubic 1500ZA HF Linear Amplifier. You definitely don't see these come around to often. Good cosmetic condition both inside and out, as shown. With about 20W of drive, we were able to produce about 110W carrier output. I'm assuming the pair of 572B's will need to be replaced, otherwise in working condition. Power consumption was approximately 280W at 115VAC during transmit. s/n: 5011-2060479 Approx. Weight: 41 lbs. Approx. Dims: 16x15x8

73 - Cubic ST-2B, 2KW Antenna Tuner Cubic ST-2B, 2KW Antenna Tuner, in good working condition. Approx. Weight: 20 lbs. Approx. Dims: 16x13x7

74 - KLM Multi-2700 2M Transceiver KLM Multi-2700 2M Transceiver. Approximately 15W output, appears to be in good working condition. Includes KLM hand mic and power cord. Approx. Weight: 26 lbs. Approx. Dims: 15x14x6

75 - Realistic HTX-212 2M Transceiver Realistic HTX-212 2M Transceiver. Transmit is approximately 35W output and about 0.5 uv receive sensitivity. Hand mic included. Approx. Weight: 4 lbs.

76 - Realistic HTX-100 10M Transceiver Realistic HTX-100 10M Transceiver. In working condition, approximately 15W output, CW, 6W average SSB. Hand mic included. The upper left part of the display is damaged (see photo), but it does not affect viewing of the display information. Approx. Weight: 5 lbs.

77 - AZDEN PCS-2000 2M FM Transceiver AZDEN PCS-2000 2M FM Transceiver. This unit is in good working condition with about 20W output and 0.3uv sensitivity in receive. Includes hand mic. Would make a good backup rig for the car. Approx. Weight: 5 lbs. Approx. Dims: 10x8x3

78 - Heathkit SB-100 SSB Transceiver Heathkit SB-100 SSB Transceiver. This rig is in good to very good cosmetic condition and all knobs and switches are working mechanically, as intended. Since there is no power supply included, we were unable to do any electrical testing. Original assembly manual is included. Approx. Weight: 20 lbs. Approx. Dims: 16x15x8

79 - Heathkit SB-600 Speaker Heathkit SB-600 Speaker. Great looking and in working condition. Approx. Weight: 4 lbs. Approx. Dims: 11x10x8

80 - Heathkit SB-401 SSB Transmitter Heathkit SB-401 SSB Transmitter. Overall good cosmetic condition with the exception of the paint loss on the upper left front panel and a ding to the right side rear of the transmitter. Both of which are shown in the photos. Operationally, transmit was about 80W output CW with power consumption of 230W at 115VAC. Standby power consumption is about 95W. Original assembly manual included, however, you'll have to supply your own power cord. Approx. Weight: 27 lbs. Approx. Dims: 16x14x8

81 - Hammarlund HQ-110 Receiver Hammarlund HQ-110 Receiver. Beautiful set with only a few minor scuffs and scratches on the case. The front panel looks great, with only some yellowing to the clock lens. The clock is in working condition. This radio is in working condition as well with about 75W power consumption during receive at 115VAC. The controls are a bit scratchy, so some contact cleaner might not be a bad idea. Approx. Weight: 25 lbs. Approx. Dims: 16x12x10

82 - Hammarlund HQ-170A Receiver Hammarlund HQ-170A Receiver. This set is in working condition and draws about 90W during receive at 115VAC. All functions work, as well as the clock. Some of the switches and knobs are noisy and will need cleaning. Cosmetically, the unit is in good condition. There are holes drilled in top and left hand side of the cabinet, as shown. The tuning knob is chipped, see last photo. The interior of the unit is very clean. Approx. Weight: 40 lbs. Approx. Dims: 19x14x11

83 - Hammarlund HQ-170 Receiver Hammarlund HQ-170 Receiver in very good cosmetic condition. Only very minor scuffs/scratches present. During receive, this set draws about 100W at 15VAC. No problem pulling in multiple BCB and some amateur stations. Original manual included. Approx. Weight: 40 lbs. Approx. Dims: 14x20x11

84 - Hammarlund HC-10 SSB Adapter Converter Hammarlund HC-10 SSB Adapter Converter. Provides SSB reception and greater selectivity for receivers without a product detector. It requires a receiver IF of between 450 and 500 kHz. It plugs into the receiver's last I.F. tube. It can be used with the SP-600 and others. This unit has not been tested, but appears all original. Approx. Weight: 15 lbs. Approx.Dims: 10x10x7

85 - Halicrafters SX-96 Receiver & R-46B Speaker Halicrafters SX-96 Receiver & R-46B Speaker. Absolutely beautiful pair! Both the radio and speaker are in exceptional condition, inside and out, as shown. The set was serviced back in 2015, see the last photo for a copy of the invoice and work done by Communication Services of Carrollton, TX. This set draws about 73W at 115VAC and I had no issues picking up local BCB stations throughout the area. Original manual as well as a copy of the manual in binder, as shown. Approx. Weight, radio, speaker: 34 lbs., 9 lbs. Approx. Dims, radio, speaker: 21x10x9, 16x12x8

86 - Hallicrafters SR-160 & PS-150-120 Power Supply Hallicrafters SR-160 & PS-150-120 Power Supply. Very nice looking transceiver and power supply with only a few minor paint flakes and/or scuffs and scratches. The bottom left front foot of the power supply has deteriorated, as you can see in the photos. On transmit, we were able to produce about 60W carrier out. The receiver section of this set will need a bit of adjustment, as the sensitivity is only about 5 uv. Approximate power consumption is 95W in receive and about 240W during transmit. Approx. Weight: 25 lbs. power supply, 13 lbs, xcvr. Approx. Dims: 12x9x7 & 13x12x7

87 - Halicrafters SR-400A Cyclone III & PS-500A Halicrafters SR-400A Cyclone III & PS-500A. Both of these units show quite a bit of paint flaking on the cabinets. Also, the RIT adjustment control (see last photo) has been glued together at some point, as well as the main tuning knob. The RIT knob will be in a separate plastic bag for your installation. During transmit, we were only able to get under 5W carrier output from the rig. Receive is very weak, as well. Definitely a restoration job in the winning bidders future! There is an external cooling fan mounted on the back, as shown. Sprial bound copy of the manual is included. Approx. Weight: 25 lbs. power supply, 13 lbs, xcvr. Approx. Dims: 12x9x7 & 15x15x6

88 - Conar Twins, 500 Receiver & 400 Transmitter Conar Twins, 500 Receiver & 400 Transmitter. These novice twins are in great overall cosmetic condition. The receiver controls are dirty/noisy, and receive is weak on 15 & 40M. Power consumption is 16W at 115VAC. The transmitter produces about 10W output on 80 & 40M, and about 1/2W on 15M. Crystals are not included. Original NRI booklet and a copy of the manuals are included. Approx. Weight, each: 6 lbs. Approx. Dims, each: 11x8x7

89 - Hallicrafters SX-99 MARK 1 Receiver Hallicrafters SX-99 MARK 1 Receiver. Very weak front end, can just barely hear some noise, and unable to pull in any stations. Power consumption is 120W at 115VAC. Approx. Weight: 27 lbs. Approx. Dims: 19x10x9

90 - National NC-57 Receiver National NC-57 Receiver, as shown. No receive noise heard and there is a slight hum. Switches need cleaning as well, static heard when operating. Approx. Weight: 25 lbs. Approx. Dims: 16x10x9

91 - (2) Multi-Elmac AF-67 & PS-2V Power Supply (2) Multi-Elmac AF-67 & PS-2V Power Supply. You are bidding on two AF-67's and one PS-2V power supply for parts or restoration. Transmitter manual included. Approx. Weight, xmtr: 20 lbs., each Approx. Dims: 11x7x10 Approx. Weight, PS: 25 lbs. Approx. Dims: 11x9x7

92 - Multi-Elmac AF-67 & (2) Power Supplies Multi-Elmac AF-67 & (2) Power Supplies. You are bidding on one AF-67, one PS-2V and one home brew power supply. The home brew supply is in working condition. The other power supply and transmitter are being sold for parts or restoration. Manuals for the transmitter and power supply are included. Approx. Weight, xmtr: 20 lbs. Approx. Dims, xmtr: 11x7x10 Approx. Weight, home brew supply: 35 lbs. Aprpox. Dims, home brew supply: 12x10x9 Approx. Weight, PS-2V: 25 lbs. Approx. Dims, PS-2V: 11x9x7

93 - Multi-Elmac AF-67 Trans-citer Multi-Elmac AF-67 Trans-citer. Untested, as shown. Includes added transmit/receive relay. Approx. Weight, xmtr: 20 lbs. Approx. Dims, xmtr: 11x7x10

94 - Black Widow Transmitter/Receiver, Rogers Elect. Black Widow Transmitter/Receiver, Rogers Electronics, Los Angeles. Includes the power supply and speaker as well as an 8075 Kc crystal. Corrosion is evident on the back of the set, however, the front and sides look good. No testing was done on this unit. Approx. Weight: 21 lbs. Approx. Dims: 10x9x6

95 - E.M. Sargent 11-AA Receiver E.M. Sargent 11-AA Receiver, as shown. Untested. Power cord has been cut. 530 KHz to 34 MHz, ham band bandspread. Approx. Weight: 29 lbs. Approx. Dims: 19x11x10

96 - (2) Gonset Communicator II's & GPP-1 Phone Patch (2) Gonset Communicator II's & GPP-1 Phone Patch. As shown, untested. The back is included for one unit. 8056.36 crystal installed in each unit. Approx. Weight, Trans/Rec: 18 lbs, each. Approx. Dims, Trans/Rec: 10x9x8, each Approx. Weight, Phone Patch: 4 lbs. Approx. Dims: 6x6x4

97 - RME-69 Receiver RME-69 Receiver. The receiver appears to be original except the case may have been painted or replaced at some point. No testing was done. The glass on each dial is cracked, however, all tuning knobs and other dials turn freely. Approx. Weight: 38 lbs. Approx. Dims: 19x12x9

98 - Hammarlund HQ-110A Receiver Hammarlund HQ-110A Receiver. Nice looking receiver with only some minor scratches and scuffs to the case. The front panel looks very good. Electrically, the set draws about 60W at 115VAC. However, receive is dead. Approx. Weight: 24 lbs. Approx. Dims: 16x10x9

99 - (2) Heathkit HW-18-1 CAP Transceivers (2) Heathkit HW-18-1 CAP Transceivers. These Civil Air Patrol transceivers come with hand mics and one manual. They are untested, but in good shape, as shown. Approx. Weight: 14 lbs. each Approx. Dims: 12x10x7

100 - (2) Heathkit HW-18-1 CAP Transceivers (2) Heathkit HW-18-1 CAP Transceivers. These Civil Air Patrol transceivers come with hand mics. They are untested, but in good shape, as shown. Approx. Weight: 14 lbs. each Approx. Dims: 12x10x7

101 - Heathkit SB-630 Station Console Heathkit SB-630 Station Console. The case does show some paint loss and a bit of corrosion, however, the clock is in working condition. There was a modular RJ-11 phone jack added, as shown. No futher testing was done. Approx. Weight: 7 lbs. Approx. Dims: 11x10x7

102 - Heathkit DX-60B Transmitter Heathkit DX-60B Transmitter. Very clean and in good cosmetic condition. There is only one (80M) crystal included. We were able to produce about 30W CW carrier output during tune up. Power consumption was approximately 160W at 115VAC. Approx. Weight: 21 lbs. Approx. Dims: 14x11x7

103 - Heathkit DX-60 Transmitter Heathkit DX-60 Transmitter. This unit has a frozen xtal and bandswitch. It does draw about 82W at 115VAC. Approx. Weight: 21 lbs. Approx. Dims: 14x12x7

104 - Heathkit HW-20 Pawnee 2M Transceiver Heathkit HW-20 Pawnee Transceiver. This rig is in fair to good cosmetic condition. There is a ding on the upper right side of the cabinet, as shown. Electrically, only receive noise is heard, and transmit output is very minimal, if any at all. Approximate power consumption during receive is 60W, and transmit is 153W. Both, at 115VAC. Hand mic is included. Approx. Weight: 28 lbs. Approx. Dims: 12x10x6

105 - Heathkit SB-610 Station Monitor Heathkit SB-610 Station Monitor. Does not power up. Otherwise a very clean unit. Approx. Weight: 10 lbs. Approx. Dims: 11x10x7

106 - Heathkit SB-104 & HP-1144A Power Supply Heathkit SB-104 & HP-1144A Power Supply. Overall good to very good condition cosmetically on both of these items. There does appear to be synthesizer and/or display issues with the transceiver. Frequency tends to jump around for apparent reason. We were able to land on a frequency and using a signal generator, inject a signal in the rig successfully. That being said, it will still need some work. The power supply draws about 160W with the transceiver connected. Transmit capability was not tested. Approx. Weight: 21 lbs, xcvr. Approx. Weight: 22 lbs. power supply Approx. Dims: 16x15x7 xcvr, 11x9x6 power supply

107 - Panoramic Radio Products Panadaptor PCA-2 T-200 Panoramic Radio Products Panadaptor PCA-2 T-200. The unit is in very good condition cosmetically. The CRT is good, as evidenced by the trace in the last photo. No further testing was done. Includes original owners manual. Power consumption is 40W at 115VAC. Approx. Weight: 14 lbs. Approx. Dims: 11x11x7

108 - Multi-Elmac AF-68 Transmitter & PMR-7 Receiver Multi-Elmac AF-68 Transmitter & PMR-7 Receiver in overall good cosmetic condition. These units have not been tested. No power supply included. Approx. Weight, recv: 8 lbs. Approx. Dims, recv: 10x7x5 Approx. Weight, trans: 18 lbs. Approx. Dims, trans: 13x9x6

109 - Recency HR-6 6M Transceiver Recency HR-6 6M Transceiver. With manual, power adapter and mic. Unit powers on, but no futher testing was done. Original box included. Approx. Weight: 4 lbs. Approx. Dims: 9x7x3

110 - TRAM D 201 CB Transceiver TRAM D 201 CB Transceiver. No transmit or receive, however, when controls are operated, you can hear clicking/scratching noise. Power consumption is about 114W at 115VAC. Approx. Weight: 26 lbs. Approx. Dims: 21x12x7

111 - Cobra 135 SSB/AM CB Transceiver Cobra 135 SSB/AM CB Transceiver, as shown. In good condition, cosmetically except for the label on the front, as shown. The unit power on, it receives and according to the unit's meter, there is some power output. However, according to my meter, there is not! Approx. Weight: 14 lbs. Approx. Dims: 14x13x6

112 - (2) Heathkit HW-16 CW Transceivers (2) Heathkit HW-16 CW Transceivers. The bottom rig was in working condition, and after about 5 minutes, one of the filter caps blew. The top unit does not power up and is being sold as parts. Approx. Weight: 20 lbs, each Approx. Dims: 12x10x6

113 - (2) Heathkit HW-16 CW Transceivers (2) Heathkit HW-16 CW Transceivers. The bottom rig is in working condition with about 5W output, CW carrier. The top rig has a bent cabinet as shown, as well as a switch added to the top right hand side of the case. This unit does not power up and is being included as a parts set. Approx. Weight: 20 lbs., each Approx. Dims: 12x10x6

114 - Heathkit HS-1661 Speaker Heathkit HS-1661 Speaker. Nice looking, working condition. Manual included. Approx. Weight: 4 lbs. Approx. Dims: 9x7x6 Approx. Dims:

115 - (2) SBE Model 33 Transceivers (2) SBE Model 33 Transceivers. Both of these units appear to be original and cosmetically in fair to good condition. All knobs and switches function mechanically, as intended. Electrically, we made up a test cable, and one of the units powered on, however, no TX or RX. Power consumption was 36W at 115VAC. The other unit did not power on. There is no power cable included. Approx. Weight: 16 lbs. each Approx. Dims: 12x10x6

116 - Siltronix 1011D Xmtr, 80 VFO & FD-1011 Display Siltronix 1011D Xmtr, 80 VFO & FD-1011 Display. You're bidding on all 3 of these items. The VFO and digital display powers on, however, the transmitter does not. Note, there is no fuse or fuse cap with the transmitter. We used our own for testing purposes. Approx. Weight, xmtr: 21 lbs. Approx. Dims, xmtr: 13x11x7 Approx. Weight, VFO & Display: 8 lbs.

117 - National RCQ Receiver, Civil Aeronautics Admin. National RCQ Receiver, Civil Aeronautics Admin. This set appears to be all original and untested. All dials, knobs and switches work mechanically, as intended. s/n: 81 Approx. Weight: 53 lbs. Approx. Dims: 16x14x9

118 - Central Electronics 20-A Multiphase Exciter Central Electronics 20-A Multiphase Exciter. Very nice looking set, and appears to be original as well. No testing was performed. Approx. Weight: 21 lbs. Approx. Dims: 19x10x9

119 - SBE Model 34 HF Transceiver SBE Model 34 HF Transceiver. This unit is in fair cosmetic condition with some corrosion present and some type of old velcro material on the right hand side, as shown. Electrically, there is no receive or noise of any kind heard. Upon tuning up, we were only able to produce about 3 - 5 W carrier output. Power consumption in receive was approximately 58W and during transmit 90W. Both were at 115VAC. Motorola hand mic and power cord included. Approx. Weight: 20 lbs. Approx. Dims: 11x10x5

120 - WRL Globe Scout 680 Transmitter WRL Globe Scout 680 Transmitter, untested, as shown. Power cord has been cut, I'm assuming a restoration will be in order. Approx. Weight: 26 lbs. Approx. Dims: 14x8x8

121 - RME 4350 Receiver & 4301 SSB Selector RME 4350 Receiver & 4301 SSB Selector. This is one of the cleanest 4350's I've seen as far as the cabinet and front panel. The dial works well, and has no issues, as is normally found in these sets. Receive is weak, drawing about 67W at 115VAC. The sideband selector was no tested, but appears complete and original. Original RME 4350 manual included. Approx. Weight, rec: 32 lbs. Approx. Dims, rec: 16x11x10 Approx. Weight, ssb: 12 lbs. Approx. Dims, ssb: 11x9x9

122 - Hallicrafters S-38E & S-41-G Receivers Hallicrafters S-38E & S-41-G Receivers. The S-41-G receives OK on BCB with about 26W power consumption at 115VAC. The switches and knobs are noisy. The S-38E comes with a manual copy and receive is OK, but is somewhat distorted. Can also hear some motorboating and hum in the background. Power consumption is about 21W at 115VAC. Approx. Weight: 11 lbs., each Approx. Dims: 12x8x8 & 13x9x8

123 - Hallicrafters S-20-R Receiver Hallicrafters S-20-R Receiver. Cabinet is in fair to good condition, as shown. Electrically, receive is OK, and power consumption is about 60W at 115VAC. Approx. Weight: 30 lbs. Approx. Dims: 19x10x10

124 - Hallicrafters SX-42 Receiver Hallicrafters SX-42 Receiver in fair to good condition, as shown. Power consumption is approximately 90W in receive, however, there is no audio output. Approx. Weight: 52 lbs. Approx. Dims:`20X16X11

125 - Hallicrafters SX-101A Receiver Hallicrafters SX-101A Receiver in overall good to very good condition cosmetically. There are 3 knobs that are not original, Ant. Trimmer, Pointer Reset and Notch Depth, as shown. The dial glass is loose and will need to be reset. It will be taped down to prevent movement during shipping. During receive, the set does show signs of life, and can hear a 1 milivolt signal (using an HP 8657B gen). So, it will need some TLC in that regard. Power consumption is approximately 92W at 115VAC. It does include the optional crystal calibrator. Approx. Weight: 75 lbs. Approx. Dims: 20x16x11

126 - BOGEN RP 150 BM Mono AM/FM Rcvr. PA Amp BOGEN RP 150 BM Mono AM/FM Rcvr. PA Amp. Unit does power on with about 100W power consumption at 115VAC. A 60 Hz hum is present so was unable to tune in any local stations. There may be a 6BQ5 biasing issue as well. Cosmetically, there are scratches and scuffs to the cabinet as well as top has been pushed down toward the rear, as shown Approx. Weight: 22 lbs. Approx. Dims: 16x12x6

127 - Audiometric AM 441 Audio Power Amplifier Audiometric AM441 Power Amplifier, Solid state, not much information available. Two channels. Rack mount, but the upper left corner is bent, as shown. This is a working amplifier, power consumption is about 45W at 117VAC. s/n: 145. Approx. Weight: 20 lbs. Approx. Dims: 19x14x4

128 - Fisher MT-720 Direct Drive Turntable Fisher MT-720 Direct Drive Turntable. Missing dust cover/top. This turntable does work, includes a Grado cartridge/needle, as shown. Approx. Weight: 6 lbs. Approx. Dims: 18x15x5

129 - KLH 24 FM Stereo, Turntable & Speakers KLH 24 FM Stereo, Turntable & Speakers. This early all in one system is in working condition as far as FM stereo goes, however, the controls are dirty/noisy and will need servicing. The turntable will spin but won't go into 78 RPM, also the changer is non-functional. The left channel RCA connector on the turntable is intermittent and will need some work. Approx. Weight, main unit: 20 lbs. Approx. Dims: 19x15x9 Approx. Weight, Speakers, each: 14 lbs. Approx. Dims, Speakers, each: 18x11x8

130 - Allied Radio Shack TD 1099 Reel-to-reel Allied Radio Shack TD 1099 Reel-to-reel, in working condition! Tested. Power comsumption is approximately 23W at 115VAC. Approx. Weight: 23 lbs. Approx. Dims: 16x13x5

131 - Silvertone 4238 Reel-to-reel Tape Deck Silvertone 4238 Reel-to-reel Tape Deck. This vacuum tube set draws about 50W at 115VAC. It is missing the center post for the supply reel. No further testing was performed. Nice looking cosmetically, as shown. Approx. Weight: 30 lbs. Approx. Dims: 19x14x11

132 - Kennedy Type 281 One Tube Regen Receiver Kennedy Type 281 One Tube Regen Receiver. This is one of the early sets which has the metal binding posts and was only made in San Francisco. Later versions with the bakelite binding posts were made in both San Francisco and St. Louis. The set is in overall good to very good condition with some minor wear to the wood case. The front panel is looking very good, with some minor wear to the knob skirts. A brass base Cunningham C-300 detector is included, and tests good. s/n: 4409 Approx. Weight: 11 lbs. Approx. Dims: 18x8x7

133 - Kennedy Type 521 Two Stage Amplifier Kennedy Type 521 Two Stage Amplifier for use with the 281 receiver in the previous lot. This is also an early San Francisco version and includes two jumper bars that connect the audio amp to the detector output of the 281. In good to very good overall condition cosmetically. The Cunningham CX-371A tube tests great with results of 76/42, where 42 is the minimum good value. The CX-301A tests at the minimum value of 18. Tubes were tested with a Dan Nelson calibrated TV-7. s/n: 2378 Approx. Weight: 6 lbs. Approx. Dims: 8x7x6

134 - Signal Type R-110 Crystal Set Signal Type R-110 Crystal Set in good condition with some scuffs and scratches which are evident on the cabinet. Made in Menominee, MI. Inside the lid is the original schematic with the QA inspectors hand writing. The cabinet and lid both have matching serial numbers of 222, as shown in the last photo. Crystal and cat whisker included, as shown. Approx. Weight: 4 lbs. Approx. Dims: 9x6x6

135 - Audiola One Tube Regen Receiver Audiola One Tube Regen Receiver. This set is in overall good condition with some scratches and scuffs to the cabinet as well as some roughness to the interior as shown. Included is a Radiotron WX-12 with a good filament and no shorts. Very unusual set that would make a great addition to your early radio collection. Approx. Weight: 5 lbs. Approx. Dims: 10x8x7

136 - Paramount One Tube Regen Receiver Paramount One Tube Regen Receiver made by Paramount Electric & MFG Co. Licensed under Armstong Patent for Amateur and Experimental Use. Overall fair to good condition, cosmetically. Includes a good, glass tipped, Radiotron WD-12. Filament OK and no shorts. Approx. Weight: 6 lbs. Approx. Dims: 12x8x7

137 - Grebe Item, Perhaps Display Piece Grebe Item, Perhaps Display Piece. This item was taken to the Antique Wireless Conference in Rochester, NY and was not positively identified, except for "something Grebe". It may have been used in the Grebe factory or in up-scale Grebe sales displays as a switching mechanism between different radio sets. RORN, CR-8 and CR-5 are all Grebe model numbers. Approx. Weight: 8 lbs. Approx. Dims: 15x8x7

138 - Canadian Westinghouse 801 Tombstone w/2 45's Canadian Westinghouse 801 Tombstone w/2 45's. This radio is in good condition, with some minor scuffs and scratches as shown. The grill cloth appears to have been replaced and there is a small tear at the bottom right corner. The set works well, and was able to pull in BC stations with no problem. See YouTube video. Power consumption at 115VAC was approximately 85W. This radio does have 2 Marconi Radiotron 45 shoulder tubes. The tubes test 58/47 and 68/47, where 47 is minimum good. A Dan Nelson calibrated TV-7B/U was used for testing. This power switch on the right side is original to the set. Approx. Weight: 40 lbs. Approx. Dims: 20x14x11

139 - Philco 42-390 Wood Table Radio Philco 42-390 Wood Table Radio in overall good condition, as shown. The push buttons will need some work, but the radio does play and draws about 55W during receive at 115VAC. Approx. Weight: 27 lbs. Approx. Dims: 20x13x11

140 - Brunswick 5NO Radio Brunswick 5NO Radio. This super-het is in fair to good condition. The cabinet will need some work as far as refinishing. There is a good 71A shoulder tube in this set, testing at 70/42 where 42 is minimum good. All other tubes, except for the rectifier are globe tubes. Approx. Weight: 40 lbs. Approx. Dims: 31x11x10

141 - Philco 37-61 Cathedral Philco 37-61 Cathedral. The cabinet is in fair condition as is the photo finish on the front panel. Controls are scratchy and when a station is tuned in, it fades in and out. Power consumption is 58W at 115VAC. Approx. Weight: 19 lbs. Approx. Dims: 17x14x9

142 - Sonora RCU-208 Table Radio Sonora RCU-208 Table Radio. Very nice looking cabinet and finish, as shown. One knob is missing. Power consumption is about 23W at 115VAC during receive. Receive does work well, pulling in quite a few BCB stations. Approx. Weight: 9 lbs. Approx. Dims: 15x9x8

143 - Stewart Warner Model 62T16 Stewart Warner Model 62T16 Wood Tabletop Radio in very good overall condition. The radio draws about 55W at 115VAC during receive. Receive is weak, however, I was able to pull in a couple BCB stations. Approx. Weight: 21 lbs. Approx. Dims: 21x11x10

144 - Kolster Model K-21 Radio Kolster Model K-21 radio. In good overall condition as shown. There is full tube compliment and the 71A RCA Radiotron tests good at 69/42, where 42 is the minimum good value. It is a shoulder tube. Approx. Weight: 48 lbs. Approx. Dims: 21x13x10

145 - Arvin Model 551-T Arvin Model 551-T Wood Table Radio in overall good condition as shown. Receive sounds great and power consumption is approximately 53W at 115VAC. The knob brights appear to be missing from the knobs. Approx. Weight: 13 lbs. Approx. Dims: 15x10x8

146 - Stromberg-Carlson Model 1101-H Stromberg-Carlson Model 1101-H. Very nice looking table radio. Receives well, about 23W power consumption at 115VAC. Approx. Weight: 8 lbs. Approx. Dims: 13x9x7

147 - Delco Wood Table Radio Delco wood table radio in overall fair to good condition. Power consumption is about 24W at 115VAC during receive. Volume is low and volume control is difficult to turn. Missing tone control knob. Approx. Weight: 14 lbs. Approx. Dims: 16x10x9

148 - Atwater Kent Model 20 Receiver Atwater Kent Model 20 Receiver with full tube compliment. The wood cabinet will need some cleaning and/or light sanding. Approx. Weight: 19 lbs. Approx. Dims: 26x9x8

149 - Airline 04WG-673B Wood Table Radio Airline 04WG-673B Wood Table Radio. As you can see, the cabinet is in good condition, however the escutcheon, pushbuttons and dial will need some work or replaced. The lower right knob is seized and will not turn. Approx. Weight: 24 lbs. Approx. Dims: 22x12x12

150 - RCA Radiola Model AR-812 RCA Radiola Super-Heterodyne Model AR-812 in overall good condition. All 99 tubes are present and filaments test good. Interior looks very clean, as shown. Approx Weight: 35lbs. Approx Dims: 35 x 11 x 11

151 - Philco Model 50-526 Transitone Code 121 Philco Model 50-526 Trsnsitone. Very nice looking radio, great volume and sound. Power consumption approximately 26W at 115VAC. No problem picking up local BCB stations. Case is in very good shape, as shown. Approx. Weight: 6 lbs. Approx. Dims: 12x7x7

152 - RCA Model 4-X-646 RCA Model 4-X-646. Case is in very good condition with hardly any noticeable wear. Power consumption is about 22W at 115VAC. It does pickup local BCB stations, however, there is a distinct 60 Hz hum in the background. Approx. Weight: 5 lbs. Approx. Dims: 11x7x7

153 - Zenith Deluxe J616 Zenith Deluxe J616. Very nice condition and the clock is in working condition as well as the radio. During receive, power consumption is about 30W at 115VAC. Reception is ok, but seems a bit weak. Approx. Weight: 5 lbs. Approx. Dims: 13x6x6

154 - Philco Transitone 52-540 Code 122 Philco Transitone 52-540 Code 122. Good condition as shown. Hum only during receive, about 26W at 115VAC. Approx. Weight: 5 lbs. Approx. Dims: 11x6x5

155 - Philco Model 46-131 Battery Radio Philco Model 46-131 Battery Radio. Cabinet is in very good condition, as shown. Knob are in working condition. No testing was done on this set. Appears complete. Approx. Weight: 10 lbs. Approx. Dims: 15x9x9

156 - Atwater Kent Model 35 Atwater Kent Model 35. As shown, untested. Approx. Weight: 13 lbs. Approx. Dims: 17x8x5

157 - Philco Transitone Model 46-250 Code 121 Philco Transitone Model 46-250 Code 121 in very good condition, as shown. Power consumption is approximately 26W at 115VAC. Receive is loud and able to pull in local BCB stations with no problems. Approx. Weight: 7 lbs. Approx. Dims: 11x7x7

158 - RCA Victor Model 66X2 RCA Victor Model 66X2 with a case that will need some work, as shown. There is a noticeable chip on the right side, bottom. This radio draws about 26W during receive at 115VAC. Able to pickup a couple BCB stations, bandswitch is set to AM no matter the position it is in. Approx. Weight: 10 lbs. Approx. Dims: 15x9x6

159 - Philco Transitone Model 49-504 Code 121 Philco Transitone Model 49-504 Code 121. In very good condition, as shown. Power consumption is about 25W at 115VAC. Reception is good, able to pull in multiple BCB stations with ease. Approx. Weight: 6 lbs. Approx. Dims: 11x7x7

160 - Crosley Model 68TA Crosley Model 68TA in fair condition. Dial lens is warped, however all knobs do function. Power consumption is about 69W at 115VAC. Able to pull in a few BCB stations, receive volume is low. Approx. Weight: 12 lbs. Approx. Dims: 14x9x9

161 - RCA Victor 9X6741 Table Radio RCA Victor 9X6741 Table Radio in good to very good condition, as shown. There is some type of residue right below the dial glass on the bakelite surface. Power consumption is about 28W at 115VAC during receive. Able to pull in BCB stations with no problem. Approx. Weight: 8 lbs. Approx. Dims: 13x9x7

162 - Crosley Model 4-29 TRF Radio Crosley Model 4-29 TRF Radio. As shown. Full tube compliment. Approx. Weight: 7 lbs. Approx. Dims: 15x8x7

163 - Regency TR-6 Portable Radio Regency TR-6 Portable Radio with leather case, as shown. You can see that the case is in need of repair. Knobs are in good condition. Approx. Weight: 4 lbs. Approx. Dims: 7x5x3

164 - (2) RCA Victor Strato-World Portable Radios (2) RCA Victor Strato-World Portable Radios. as shown. The set on the left needs the dial restrung. Only able to receive static, since no tuning was available. Very clean leather and interior. Two spare tubes included, 1L6 & 1U5. The set on the right has no audio output and includes external antenna. The leather case will need some cleaning and there is some corrosion present on the brass hardware. Brochures and manuals, as shown. Both sets draw about 12W at 115VAC. Both antennas extend and retract properly. Approx. Weight: 17 lbs. each Approx. Dims: 17x10x8

165 - Zenith & Bendix Portable Radios Zenith & Bendix Portable Radios. Zenith 6A19 portable with a case that is in good to very good condition. Interior looks very good as well. The dial will need to be restrung. The set does power up with static. Bendix PAR-80A portable with a case that is in fair condition with corrosion evident on the hardware. The set does power up, but there is no audio output. Approx. Weight: 11 lbs. each Approx. Dims:15x10x7 Approx. Dims: 13x11x7

166 - Zenith B600 Trans-Oceanic Portable Zenith B600 Trans-Oceanic Portable, receive is ok at about 11W power consumption at 115VAC. Includes Sam's Photofact. The handle appears to be reglued and there is a partial hole that was drilled in the handle as shown. Approx. Weight: 20 lbs. Approx. Dims: 17x11x8

167 - Zenith H500 Trans-Oceanic Portable Zenith H500 Trans-Oceanic Portable. Dial string is broken and will need to be restrung. Power consumption is about 11W at 115VAC, static only since there is no tuning possible. Approx. Weight: 20 lbs. Approx. Dims: 17x11x8

168 - Zenith G500 Trans-Oceanic Portable Zenith G500 Trans-Oceanic Portable. There is definite 60 Hz. hum when this set is powered on. Power consumption is about 10W at 115VAC. The lower part of the back cover has 3 holes about 1/2 inch each in diamter that were patched and painted over. Schematics included. Approx. Weight: 20 lbs. Approx. Dims: 17x11x8

169 - Zenith H500 Trans-Oceanic Portable Zenith H500 Trans-Oceanic Portable. The dial string is broken and will need restrug. Only static is heard during receive, since tuning is not possible. 12W power consumption at 115VAC. Operating instructions and miscellaneous documentation included. Approx. Weight: 20 lbs. Approx. Dims: 17x11x8

170 - (2) Zenith 3000-1 Trans-Oceanic Portable Radios (2) Zenith 3000-1 Trans-Oceanic Portable Radios. Neither of these sets have been tested. One does have a battery compartment included. There is evidence of corrosion inside of both sets. The one on the left seems to have the most, as shown. The set on the right has some front panel issues, as shown, as well as pitting on the top panel. Both sets dials and knobs appear to function mechanically, as intended and the antennas are in working condition, extending and retracting as intended. One of the handles does have a crack around the outside of the black plastic. Approx. Weight, each: 11 lbs. Approx. Dims, each: 13x11x5

171 - Arvin & Westinghouse Transistor Portables Arvin & Westinghouse Transistor Portables. Both of these radios are in fair to good cosmetic condition. No testing was performed. Approx. Weight: 3 & 4 lbs. Approx. Dims: 9x5x3 & 11x10x3

172 - Atwater Kent Model L Horn Only Atwater Kent Model L Horn Only, as shown. No driver included. Approximately 14.5 inch diameter and 14 inches deep. Approximate weight is 7 pounds.

173 - RCA Radiola Loudspeaker UZ-1325 Driver Base Only RCA Radiola Loudspeaker UZ-1325 Driver Base Only. As shown. Using an ohmmeter, the driver tests good at about 1.8k ohms. Approx. Weight: 3 lbs. Approx. Dims: 6 inches dia., 3 inches tall

174 - RCA Radiola Loudspeaker Model 100, no driver RCA Radiola Loudspeaker Model 100, no driver, as shown. Approx. Weight: 11 lbs. Approx. Dims: 17x13x7

175 - Breting 14 Receiver, Black Breting 14 Receiver. Absolutely beautiful receiver, both inside and out. Chrome plated interior and mirrored dial make this set a real looker! You will notice that there is no nomenclature on the front panel, as that was how these sets were shipped from the factory. See the PDF link above for schematics and dial nomenclature for the 14 as well as other Breting receivers. Approximately 90W power consumption during receive at 115VAC. You will need to make a speaker plug for this one, using a 4-pin tube socket. See back panel. Receive is good, no problems pulling in BCB stations. NOTE: the dial glass is mirrored, so I had to use the white background as a reflective surface in a couple photos to try to display the "Breting 14" name on the dial. Approx. Weight: 50 lbs Approx. Dims: 18x13x11

176 - Breting 14AX Receiver, Gray Breting 14AX Receiver, Gray. Chrome plated interior and mirrored dial face. The dial glass is missing. You will notice that there is no nomenclature on the front panel, as that was how these sets were shipped from the factory. See the PDF link above for schematics and dial nomenclature for the 14AX as well as other Breting receivers. No audio output in receive, however, there was about 90W power consumption at 115VAC. You will need to make a speaker plug for this one, using a 4-pin tube socket. See back panel. The tuning dial is missing as well as the mechanism that attaches the tuning dial to the gear drive that moves the dial pointer. NOTE: the dial glass is mirrored, so I had to use the white background as a reflective surface in a couple photos to try to display the "Breting 14AX" name on the dial. Approx. Weight: 50 lbs Approx. Dims: 18x13x11

177 - Zenith 6D030 Wood Table Radio Zenith 6D030 Wood Table Radio. The plastic dial is cracked and the grill cloth has some issues, as shown. Electrically, the set draws about 25W during receive. The volume/tuning knob is a bit scratchy and will need some contact cleaner. Approx. Weight: 7 lbs. Approx. Dims: 14x8x6

178 - Hickok 539C Tube Tester Hickok 539C Tube Tester in working condition. All meters do function/move, and known good tubes were tested and compared to a calibrated TV-7, making the proper conversions. It appears that the 539C will need some calibration or adjustment, but overall, for most purposes, it can be used as is. The roll chart does slip, but it will turn eventually. Cosmetically, the front panel in very good condition, as you can see by the photos. The case is ok, but could use some clean up. There are a few minor tears and some corrosion to the metal parts, as shown. Cap leads, instruction manual and obsolete supplementary tube data book included. Approx. Weight: 28 lbs. Approx. Dims: 19x17x8

179 - Hickok 750 Tube Tester Hickok 750 Tube Tester. This tube is in overall good to very good cosmetic condition as far as the front panel goes, as shown. Electrically, the line adjust can not be set properly because the needle pointer will only advance so far before it hits the surface of the meter and then stops. It will stop about half scale. Power consumption is about 38W at 115VAC. The roll chart has a hard time advancing, and sticks quite a bit. Included is a Hickok CRT tester adapter, two third party tube adapters, 2 plate caps, 3 rolled roll charts, 2 roll charts sent from Hickok, folded, foreign tube test data, original manual, and various other materials as shown. A great looking tester, with a little work, this could be a great addition to your bench. Approx. Weight: 23 lbs. Approx. Dims: 19x17x8

180 - HP 400H Vacuum Tube Voltmeter HP 400H Vacuum Tube Voltmeter in working condition, no probes included. Contact cleaner will be needed on the range switch. Approx. Weight: 18 lbs Approx. Dims: 12x12x7

181 - Marker Generator & Capacitance Resistance Bridge Marker Generator & Capacitance Resistance Bridge. RCA WR-99A and a McMurdo Silver 904, as shown. The RCA generator comes with probes and connectors, see photos. Both units appear all original and are untested. Approx. Total Weight: 30 lbs.

182 - EICO 667 Dynamic Conductance Tube Tester EICO 667 Dynamic Conductance Tube Tester. The case shows some corrosion on the back, hinge side, as shown. Electrically, we were able to successfully set the line test and test a few known good tubes. Basic functionality appears to be OK. Approx. Weight: 17 lbs. Approx. Dims: 15x13x6

183 - AN/URM-120 Wattmeter AN/URM-120 Wattmeter. Working wattmeter with 3 elements, 2-30 Mc (50-1000W), 25-250 Mc (10-100W), 200-1000 Mc (10-100W). The latch on the case is a bit loose and will need to be adjusted. Extra RF connector included, as shown. Approx. Weight: 12 lbs. Approx. Dims: 11x8x7

184 - (2) Heathkit IG-102 RF Signal Generators (2) Heathkit IG-102 RF Signal Generators. These units power up and each draw about 15W. No further testing was done. The unit on the right is in very good condition cosmetically, the one on the left shows some paint flaking on the top. Approx. Weight: 4 lbs. each Approx. Dims: 10x7x6

185 - Heathkit IM-2410 Frequency Counter Heathkit IM-2410 Frequency Counter in working condition. Two ranges, 10Hz - 50MHz, 20MHz - 225MHz. Approx. Weight: 4 lbs Approx. Dims: 9x8x3

186 - Sencore Model CB42 Deluxe CB Analyzer Sencore Model CB42 Deluxe CB Analyzer. For those of you who might need a CB analyzer, here's one in great condition both cosmetically, and electrically. All basic functions have been tested and are in working condition. Sencore made some excellent test equipment, and even if you just need a basic RF signal generator or audio generator, this might just be what you've been looking for. Included are test leads, power cord and 12V cig lighter adapter. Approx. Weight: 24 lbs. Approx. Dims: 14x11x10

187 - Rycom 2174A Selective Voltmeter, VLF, 0-420 KHz Rycom 2174A Selective Voltmeter, VLF, 0-420 KHz in working condition. Very clean unit. The handle has been taped and the power cord is a bit brittle, but that can be easily replaced. One rubber foot is missing. Approx. Weight: 30 lbs. Approx. Dims: 17x10x9

188 - Heathkit V-7A VTVM Heathkit V-7A VTVM in working condition, nice clean unit. Approx. Weight: 4 lbs.

189 - Heathkit IM-5228 VTVM Heathkit IM-5228 VTVM, As shown, with probes. In working condition, accurate on voltages. Manual copy included. Approx. Weight: 5 lbs. Approx. Dims: 13X5X5

190 - Heathkit IG-102 Signal Gen & IT-18 Trans. Tester Heathkit IG-102 Signal Gen & IT-18 Transistor Tester. The signal generator is in working condition as far as RF output, however, the fine attenuator knob and main tuning knob will need a bit of contact cleaner and/or adjustment. The transistor tester is untested. Both units are in very good cosmetic condition. Approx. Weight, total: 10 lbs.

191 - Heathkit AM-2 SWR Bridge & GD-1 Grid Dip Meter Heathkit AM-2 SWR Bridge & GD-1 Grid Dip Meter. As shown, GD-1 powers on, no coils. SWR bridge appears to work, but accuracy is unknown. Approx. Total Weight: 3 lbs.

192 - (2) Simpson 260 Multimeters (2) Simpson 260 Multimeters. Both of these meters include probes, and they do work and are fairly accurate measuring DC voltages. No other testing was done. One of the meters probes appear to be "stuck" in their sockets. Perhaps corrosion? Approx. Weight: 7 lbs. total

193 - TENMA 35A Multiple DC Outlet Strip TENMA 35A Multiple DC Outlet Strip in good working condition. Very lightly used. Approx. Weight: 2 lbs. Approx. Dims: 15x4x2

194 - RigExpert AA-30 Antenna Analyzer RigExpert AA-30 Antenna Analyzer in great condition working order! Instructions, original box and software included. You'll need to change batteries soon, as they show low power on the units display. 2 AA's. Approx. Weight: 1 lb. Approx. Dims: 9x5x2

195 - MFJ-949C Deluxe Versa Tuner II MFJ-949C Deluxe Versa Tuner II in good working condition. Also appears to have been very lightly used. Approx. Weight: 4 lbs. Approx. Dims: 11x8x4

196 - Tokyo HY-POWER HC-400L HF Antenna Tuner Tokyo HY-POWER HC-400L HF Antenna Tuner in good working condition. Original manual and copy of manual included. Approx. Weight: 7 lbs. Approx. Dims: 11x11x5

197 - (3) Heathkit Testers, IG-4505, CT-1, & IM-17 (3) Heathkit Testers, IG-4505, CT-1, & IM-17. All units power on, and the eye tube in the CT-1 is in working condition. Oscilloscope Calibrator, Capaci-Tester, and a Utility Voltmeter. Approx. Total Weight: 10 lbs.

198 - Hickok Model 810 Transistor Radio Tester Hickok Model 810 Transistor Radio Tester in working condition! Approx. Weight: 10 lbs. Approx. Dims: 11x9x7

199 - Heathkit SG-8 Sig Gen & IP-12 Battery Eliminator Heathkit SG-8 Sig Gen & IP-12 Battery Eliminator. Both units are in good cosmetic condition. The SG-8 tests ok for basic operation, as does the IP-12. The controls on the IP-12 are a bit scratchy and could benefit from some contact cleaner. Approx Weight Sig Gen: 5 lbs. Approx. Dims Sig Gen: 10x7x6 Approx. Weight Batt: 14 lbs. Approx. Dims Batt: 13x9x8

200 - Power Supply, Signal Gen & FS Meter Power Supply, Signal Gen & FS Meter. Included in this lot are the following: RCA WR-50A signal generator which powers on, an EICO 1064S power supply which tests OK, and a B-I Labs field strength meter which does not appear to work, however, the meter does move. Approx. Total Weight: 31 lbs.

201 - BIRD Tenuline 2kW 30dB Attenuator Dummy Load BIRD Tenuline 2kW dB Attenuator Dummy Load, model 8329-300. This is one serious piece of gear! Built like a tank, but you wouldn't expect anything less from BIRD. The roller base was added to the unit, with braking wheels. With 2kW input and 30 dB of attenuation, it should handle most of your needs. This unit is very good working condition, input and output measures approximately 51-55 ohms. Approx. Weight: 55 lbs: Approx. Dims, with roller base: 22x22x14

202 - JFW 50FH-003-300 Fixed Attenuator DC-1 GHz 3dB JFW 50FH-003-300 Fixed Attenuator DC-1 GHz 3dB. Very nice unit, does not appear to have much use. 300W, DC-1 GHz, 3dB fixed attenuation. Type N female/female connectors. Approx. Weight: 14 lbs. Approx. Dims: 11x5x5

203 - JFW 50FH-010-10 Fixed Attenuator DC-2 GHz 10dB JFW 50FH-010-10 Fixed Attenuator DC-2 GHz 10dB. 10dB, 10-Watts, DC to 2 GHz, N Male / Female Connectors.

204 - (2) Narda Variable and Fixed Attenuators (2) Narda Variable and Fixed Attenuators. The variable unit is model 793FM and the fixed unit is model 773-20. The 793FM has a frequency range of 4-8 GHz and is variable from 0-20 dB. The 773-20 is 0-6 GHz, 2W, 20 dB. Both of these unit are Type N Male/Female connectors.

205 - Heathkit IM-28 VTVM Heathkit IM-28 VTVM. Good overall cosmetic condition, with original manual. Zero adjust works ok, however, reading are sporadic. Controls are in need of cleaning and/or adjustment. Probes included, as shown. Approx. Weight: 6 lbs. Approx. Dims: 11x6x4

206 - HP 3310B Function Generator HP 3310B Function Generator in good working condition. As shown. IEC power cord included. Approx. Weight: 6 lbs. Approx. Dims: 9x8x5

207 - HP 204C Oscillator HP 204C Oscillator in good working condition. IEC power cord included, but not shown. Aprpox. Weight: 6 lbs. Approx. Dims: 9x7x5

208 - HP 432A Power Meter with Thermistor Mount HP 432A Power Meter with Thermistor Mount, as shown. In working condition, but will need calibrated. The Thermistor mount is good to 11 GHz. IEC power cord included, but not shown. Approx. Weight: 8 lbs. Approx. Dims: 12x7x5

209 - HP 432A Power Meter with Thermistor Mount HP 432A Power Meter with Thermistor Mount, as shown. In working condition, but will need calibrated. The Thermistor mount is good to 10 GHz. IEC power cord included, but not shown. Approx. Weight: 8 lbs. Approx. Dims: 12x7x5

210 - HP 400FL AC Voltmeter HP 400FL AC Voltmeter in working condition. IEC power cord included, but not shown. Approx. Weight: 6 lbs. Approx. Dims: 12x7x5

211 - HP 400FL AC Voltmeter HP 400FL AC Voltmeter in working condition. IEC power cord included, but not shown. Approx. Weight: 6 lbs. Approx. Dims: 12x7x5

212 - HP 400FL AC Voltmeter HP 400FL AC Voltmeter in working condition. IEC power cord included, but not shown. Approx. Weight: 6 lbs. Approx. Dims: 12x7x5

213 - HP 353A Patch Panel HP 353A Patch Panel in working condition. Attenuator, impedance and frequency switches all test OK. These units were used for old copper POTS testing and repairs.

214 - HP 353A Patch Panel HP 353A Patch Panel in working condition. Attenuator, impedance and frequency switches all test OK. These units were used for old copper POTS testing and repairs.

215 - HP 3478A Multimeter HP 3478A Multimeter. Self tests passed OK. DIsplay in good working order. No probes included. IEC power cord is included, but not shown. Approx. Weight: 7 lbs. Approx. Dims: 14x8x4

216 - HP 3478A Multimeter HP 3478A Multimeter. Self tests passed OK. DIsplay in good working order. No probes included. IEC power cord is included, but not shown. Approx. Weight: 7 lbs. Approx. Dims: 14x8x4

217 - HP 3478A Multimeter HP 3478A Multimeter. Self tests passed OK. DIsplay in good working order. No probes included. IEC power cord is included, but not shown. Approx. Weight: 7 lbs. Approx. Dims: 14x8x4

218 - Heathkit IB-1102 & Hickok 3400 Counter/MM Nixie Heathkit IB-1102 frequency counter & Hickok 3400 multimeter. The Heath counter counts, nixes ok, but not accurate. The Hickok multimeter counts, nixes ok, but none of the functions work. Power cord included with the Heathkit. No power cord for the mulitimeter. Approx. Weight, total: 20 lbs. Approx. Dims: 16x8x4, 10x9x4

219 - HP 204C, 427A, & 403B (x2) for parts HP 204C, 427A, & 403B (x2) for parts. These are non-functioning unts being sold for parts only. Some parts may be missing, as shown. Approx. Total Weight: 20 lbs. Approx. Dims, each: 8x6x5

220 - HP 711A Power Supply HP 711A Power Supply, as shown. Selling for parts or restoration. No power cord. The unit does appear to be all original inside and out. Approx. Weight: 20 lbs. Approx. Dims: 13x10x7

221 - Bird 6250 Wattmeter, 30-500 MHz, 0-250 mw Bird 6250 Wattmeter, 30-500 MHz, 0-250 mw. As shown, in working condition. BNC type connector. Approx. Weight: 2 lbs. Approx. Dims: 6x4x4

222 - Heathkit IB-101 Counter & IB-102 Freq. Scaler Heathkit IB-101 Counter & IB-102 Freq. Scaler. Both units are in working condition. As you can see from the last photo, the counter is on the money! No other test equipment is included in this lot. The hard to find HP power cords are included. Approx. Weight, each: 5 lbs. Approx. Dims: 11x9x4, each.

223 - Motion Software 10MHz Rubidium Frequency Std. Motion Software 10MHz Rubidium Frequency Std. Model MS-1003A. Excellent condition, on frequency and output is OK, as shown in the photos. The lock is acquired after about 3-5 minutes. IEC Power cord included, but not shown. Approx. Weight: 2 lbs. Approx. Dims: 6x6x5

224 - Vectron Labs FS321A-1 Frequency Standard Vectron Labs FS321A-1 Frequency Standard. The front panel output on this standard seems to work on only the 1 MHz and 100 KHz outputs, as shown in the photos. The 5 MHz output is sporadic and off frequency. We use a 12VDC power source for this unit, you will have to supply your own AC cord or 12V source. No other functionality was tested. The front panel power light is out. Approx. Weight: 14 lbs. Approx. Dims: 19x15x5

225 - Weston 931 DC Voltmeter Weston 931 DC Voltmeter in working condition, accurate. 0-75VDC. Approx. Weight: 2 lbs. Approx. Dims: 7x5x3

226 - HP 6215A Power Supply HP 6215A Power Supply in good working condition, accurate meter. Great for those small DC projects. Approx. Weight: 4 lbs. Approx. Dims: 8x6x5

227 - HP 6216A Power Supply HP 6216A Power Supply in good working condition, accurate meter. Great for those small DC projects. Approx. Weight: 4 lbs. Approx. Dims: 8x6x5

228 - HP 6234A Dual Output Power Supply HP 6234A Dual Output Power Supply in good working condition. Accurate meter. Approx. Weight: 4 lbs. Approx. Dims: 8x6x5

229 - HP 6269B DC Power Supply, 0-40V, 0-50A -- 220V HP 6269B DC Power Supply, 0-40V, 0-50A. This monster of a supply is in good working order. It is wired for 220V. Approx. Weight: 90 lbs. Approx. Dims: 19x17x7

230 - Sorenson DCR 40-25 B, 25 Amp, DC Power Supply Sorenson DCR 40-25 B, 25 Amp, DC Power Supply. Rated at 40V, 25A, this unit is in good working condition. Approx. Weight: 62 lbs. Approx. Dims: 19x17x6

231 - Lambda LPT-7202-FM DC Power Supply Lambda LPT-7202-FM DC Power Supply. Three supplies in one. One is rated at 0-7VDC, 5A and the other two are rated at 0-20VDC, 1.5A. In good working condition. Approx. Weight: 24 lbs. Approx. Dims: 13x12x5

232 - Leader LPS 152A DC Tracking Power Supply Leader LPS 152A DC Tracking Power Supply. In good working condition. As shown. Approx. Weight: 18 lbs. Approx. Dims: 15x9x6

233 - Power Designs 4050, 40VDC, 5A Power Supply Power Designs 4050, 40VDC, 5A Power Supply. In working condition. Approx. Weight: 32 lbs. Approx. Dims: 14x9x8

234 - Heathkit AG-10 Sine-Square Generator Heathkit AG-10 Sine-Square Generator, powers on, however, no output. The unit is extremely clean and looks great. Approx. Weight: 11 lbs. Approx. Dims: 13x9x8

235 - HP 400D VTVM, for repair or restoration HP 400D VTVM, for repair or restoration. Power consumption is about 65W at 115VAC. Meter movement is very erratic. Will need some work. Approx. Weight: 16 lbs. Approx. Dims: 14x12x7

236 - HP 8672A Signal Gen. OPT 006/008, 2 - 18 GHz HP 8672A Synthesized Signal Gen OPT 006/008, 2 - 18 GHz. As you can see, the generator output is looking good on the spectrum analyzer (not included) at approximately 4.6 GHz. Almost spot on. AM modulation and FM deviation were not tested because of the need for external inputs for these parameters. IEC power cord included. Approx. Weight: 60 lbs. Approx. Dims: 24x17x6

237 - HP 8640B Signal Gen OPT H66, 0.5 - 512 MHz HP 8640B Signal Gen OPT H66, 0.5 - 512 MHz. This generator is in good condition, all functions are in working order, however, a current calibration may be needed. A 241.28 MHz signal from the generator is displayed on the HP counter (not included). The last two photos show a modulated AM signal and an FM signal, respectively. Scope not included. A 3-ring binder copy of the operation and service manual is included. IEC power cord included, but not shown. Approx. Weight: 45 lbs. Approx. Dims: 18x17x5

238 - HP 606A Signal Generator HP 606A Signal Generator. Very nice looking generator. Only minor scuffs/scratches. Front panel is very clean. All functions work, attenuator is good. You will notice the 100% modulated signal displayed on the scope. The only issue we found was in the last photo, the meter was displaying about 65% modulation. Manual copy in 3-ring binder is included. IEC power cord included but not shown. Approx. Weight: 53 lbs. Approx. Dims: 20x14x12

239 - HP 606A Signal Generator, for repair HP 606A Signal Generator, for repair. Overall very good cosmetically. However, the band switch is inoperable and there is no RF output. The modulation oscillator appears to work. Approx. Weight: 53 lbs. Approx. Dims: 20x14x12

240 - Marconi TF-1066B Signal Generator Marconi TF-1066B Signal Generator. All functions work, however, the set will need calibration. Good RF output to 500 MHz. A modulated AM signal and an FM signal from the generator is shown in the last two photos, respectively. As you can see from the photos, this set is in great shape, cosmetically. A 3-ring binder with a copy of the manual is included. Approx. Weight: 53 lbs. Approx. Dims: 22x15x11

241 - WWV Standard Frequency Calibrator, RH-10, NAVY WWV Standard Frequency Calibrator in working condition, as shown. See YouTube video. This was receiving 10 MHz WWV.The 6U5 eye tube does work, but is quite dim. s/n: 650, by Browning Laboratories, Inc. Approx. Weight: 21 lbs. Approx. Dims: 19x10x9

242 - (2) HP 3575A Gain-Phase Meter, 1 Hz - 13 MHz (2) HP 3575A Gain-Phase Meter, 1 Hz - 13 MHz. You are bidding on both of these units. They both power up successfully, however, no further testing was performed. 2, IEC power cords included. Approx. Weight: 20 lbs. each Approx. Dims: 17x14x4

243 - HP 5345A Electronic Counter & 5354A Converter HP 5345A Electronic Counter & 5354A Frequency Converter (.015 - 4.0 GHz). This counter will power on and display all zeros, however, it does not count. The display does not change with any type of signal to the unit itself, or the frequency converter. IEC power cord included but not shown. Approx. Weight: 46 lbs. Approx. Dims: 19x17x5

244 - Tektronix 475 Oscilloscope Tektronix 475 Oscilloscope. All functionality appears to work, both traces, OK. The controls are a bit noisy and will need to be cleaned and serviced. Both operation and service manuals are included as well as 2 original Tek probes and a blue screen cover as shown. Approx. Weight: 30 lbs. Approx. Dims: 20x13x9

245 - HP 415E SWR Meter, Slotted Line & Acc. in Case HP 415E SWR Meter, Slotted Line & Accessories in a hard travel case as shown. Included are the following: HP 415E SWR Meter Carriage 809C HP 444A Probe 816A Slotted Line Option 002 H810B Slotted Line Section X810B Slotted Line Section HX292B H to X Adapter X281B Adapter H281A Adapter 447B Untuned Probe BNC-BNC Cable IEC Power Cord Carrying Case Approx. Weight: 40 lbs. Approx. Dims: 21x17x12

246 - HP 415E SWR Meter & 11570A Accessory Kit HP 415E SWR Meter & 11570A Accessory Kit

247 - Alford 10-26G6 Slotted Line Alford 10-26G6 Slotted Line, as shown. No attachments or accessories. Approx. Weight: 40 lbs. Approx. Dims: 68x4x3

248 - Hewlett-Packard Slotted Line Model 805C Hewlett-Packard Slotted Line Model 805C. As shown. Approx. Weight: 16 lbs. Approx. Dims: 27x5x8

249 - General Radio FA 5128 Slotted Line Assembly General Radio FA 5128 Slotted Line Assembly. As shown, with meter, cables and case. Approx. Weight: 22 lbs. Approx. Dims: 38x7x7

250 - Miscellaneous Slotted Line Assembly w case Miscellaneous Slotted Line Assembly w case Approx. Weight: 21 lbs. Approx. Dims: 48x6x6

251 - Alford Slotted Line Assembly Type 2181A4 w/ case Alford Slotted Line Assembly Type 2181A4 w/ case, as shown. Approx. Weight: 22 lbs. Approx. Dims: 57x6x6

252 - Alford Slotted Line Assembly Type 3300 w/ case Alford Slotted Line Assembly Type 3300 w/ case. As shown. Case itself is marked Type 3037 N SMA Untuned Probe. Approx. Weight: 22 lbs. Approx. Dims: 19x11x7

253 - Alford Slotted Line Assembly Type 1645 w/ case Alford Slotted Line Assembly Type 1645 w/ case. As shown with 9012 directional coupler. Case is marked Type 9243 103, N TNC Tuned Probe. Approx. Weight: 15 lbs. Approx. Dims: 18x17x5

254 - Hewlett-Packard Universal Carriage 809C w/probe Hewlett-Packard Universal Carriage 809C with 444A Probe, as shown. Manual included.

255 - Hewlett-Packard Carriage 809B Hewlett-Packard Carriage 809B, as shown. No probe included.

256 - Hewlett-Packard Carriage 809C w/probe Hewlett-Packard Carriage 809C with untuned probe 447B, as shown.

257 - Hewlett-Packard Carriage 809B Hewlett-Packard Carriage 809B, as shown. No probes.

258 - Pair of Narda Impedance Meters w/ accessories Pair of Narda Impedance Meters w/ probes, asscessories. as shown. Model 4231 and 231TNC meters. Approx. Total Weight: 10 lbs.

259 - Hewlett-Packard Variable Attenuator Model X382A Hewlett-Packard Variable Attenuator Model X382A, as shown, with end caps. Approx. Weight: 6 lbs. Approx. Dims: 16x8x5

260 - Lot of 5 Various Couplers Lot of 5 Various Couplers, as shown. Include are: Narda 3040-30 (2) Meca 700-M042-1 Unmarked 50db coupler Narda 3845C-30 Approx. Total Weight: 7 lbs

261 - (5) Wacom Preselector Filters Model WA1-1304 LOT of 5 Wacom Preselector Filters Model WA1-1304, as shown. These appear hardly used, if ever. Test frequency on all units is 1087.5 MHz. Approx. Weight each: 4 lbs. Approx. Dims, each: 9x6x2

262 - Weinschel Engineering B118-2 Attenuator Weinschel Engineering B118-2 Attenuator, as shown. Approx. Weight: ll lbs. Approx. Dims: 14x7x6

263 - Kay Variable Attenuator 30-0 Kay Variable Attenuator 30-0, as shown. 50 ohms, 1/2W, 0dB insertion loss. BNC connectors. Approx. Weight: 3 lbs.

264 - HP Frequency Meter X532B HP Frequency Meter X532B, as shown. Approx. Weight: 4 lbs.

265 - (4) Various Frequency Meters (4) Various Frequency Meters, as shown. Included are: Systron Donner DBG-919 Narda Model 811 FXR X155A Omega 158X11 Approx. Weight: 6 lbs.

266 - Technicraft Flexible Waveguide Technicraft Flexible Waveguide, as shown. Please see part number and ID marks in photos. Approx. Weight: 3 lbs. Approx. Dims: 38x1x1

267 - HP Slotted Line & 3 Slotted Sections HP Slotted Line & 3 Slotted Sections, as shown. See photos for model numbers. Approx. Total Weight: 5 lbs. Approx. Length each: 11 inches.

268 - (4) Waveguide Attenuators, MDP France, ATV 52 (4) Waveguide Attenuators, MDP France, ATV 52. As shown. Approx. Total Weight: 3 lbs. Approx. Lenght each: 8 inches

269 - (3) Waveline Waveguides SWS-2 (3) Waveline Waveguides SWS-2. As shown. See photos for part numbers and IDs. Approx Total Weigth: 2 lbs. Approx. Length each: 6 inches

270 - (6) FXR X624B, 90 Degree Waveguides (6) FXR X624B, 90 Degree Waveguides. As shown. Approx. Total Weight: 3 lbs.

271 - (2) Technicraft 28A 90 Degree Waveguide Atten. (2) Technicraft 28A 90 Degree Waveguide Attenuators, as shown. Approx. Total Weight: 2 lbs.

272 - (2) 90 Degree Waveguides (2) 90 Degree Waveguides, as shown. FXR X623B and Systron Donner DBF-224. Approx. Total Weigth: 1 lb.

273 - (4) Various Waveguides (4) Various Waveguides, as shown. See photos for manufacturer, part numbers and IDs. Approx. Total Weight: 5 lbs.

274 - HP H to X Adapter, HX292B HP H to X Adapter, HX292B, as shown. Approx. Weight:


Auctioneer License Information: 2174

    Auction Listings provided by AuctionZip.com. Although the information published herein is from sources deemed reliable, AuctionZip.com expressly disclaims any liability for errors, omissions or changes regarding any information provided for this auction. Potential buyers are urged to verify auction date, time, and content directly through the auctioneer's website or by contacting the auctioneer directly. The terms and conditions of the auction may or may not be published in this listing. ALL TERMS AND CONDITIONS AND OTHER ANNOUNCEMENTS MADE THE DAY OF THE AUCTION ARE BINDING AND TAKE PRECEDENCE OVER ANY INFORMATION FOUND HEREIN.