CLOSE
( E-Mail, User ID, or Auctioneer ID )
(Uncheck if using a shared computer)
 
 
 
 

Auctions in your inbox!

Get notified about the latest local and online auctions.

We value your privacy! Click here to read our policies.



Auction Information
Auctioneer Great Planes Trading Co. 314-497-7884
Auction Date Dec 02 Auction
Location
Harvester Lions Club
4835 Central School Road
St. Charles, MO
Time TBA
Auctioneer's Other ListingsE-mail AuctioneerAuctioneer's Web Site
View Full Photo Gallery
  • Lot# 1 - Union Mfg. Co. #411 iron compas

    Lot# 1 - Union Mfg. Co. #411 iron compas

  • Lot# 2 - Three assorted slide rules: DIE

    Lot# 2 - Three assorted slide rules: DIE

  • Lot# 3 - Pair of wooden dado plane: A.C.

    Lot# 3 - Pair of wooden dado plane: A.C.

  • Lot# 4 - WORTHINGTON (Geo Worthington Co

    Lot# 4 - WORTHINGTON (Geo Worthington Co

Auction Listing
AuctionZip Auctioneer ID# 23005
FOR A SIMPLE TEXT LIST OF THE CATALOG GO TO GREATPLANESTRADING.COM This is a partial catalog. Absentee bids accepted online or by contacting Mike at mike@greatplanestrading.com to make arrangements. Absentee bids must be received by 5:00 AM CST Saturday 12/2/2017 in order to ensure they will be executed at the live auction.

ONLINE BIDDING AVAILABLE - Click here for the full searchable catalog with images

CATALOG TEXT BELOW:
1 - Union Mfg. Co. #411 iron compass plane (same as St Union Mfg. Co. #411 iron compass plane (same as Stanley #113) IOB, here is a fine to near-new iron compass plane that is complete and fine overall in a tatty pasteboard box with duct tape reinforcing the edges of the top, very good overall. `

2 - Three assorted slide rules: DIETZGEN MANIPHASE MUL Three assorted slide rules: DIETZGEN MANIPHASE MULTIPLEX DECIMAL TRIG TYPE LOG RULE in original light brown leather case, fine; PICKETT & ECKEL complete with light wear, no case; and a K&E with original black leather case. The case has light to moderate wear including scuffing.

3 - Pair of wooden dado plane: A.C. BARTLETT’S OHIO PL Pair of wooden dado plane: A.C. BARTLETT’S OHIO PLANES 3/8-inch with screw-adjusted depth stop, intact nicker, very good overall; and a No. 48 OHIO TOOL CO. 7/8-inch with screw operated depth stop and intact nicker, very good overall.

4 - WORTHINGTON (Geo Worthington Co. Cleveland, Ohio) WORTHINGTON (Geo Worthington Co. Cleveland, Ohio) No. 400W iron smooth plane IOB.

5 - E.C. ATKINS & CO. ram’s-horn type cabinet scraper, E.C. ATKINS & CO. ram’s-horn type cabinet scraper, some light rust on blade, will clean to fine overall.

6 - GAGE TOOL CO. No. 2 transitional smooth plane, som GAGE TOOL CO. No. 2 transitional smooth plane, some light rust on cap screw and on plate that’s on top of the tote, will clean to fine overall.

7 - Four assorted slide rules: SUN HEMMI MADE IN JAPAN Four assorted slide rules: SUN HEMMI MADE IN JAPAN PAT. 1459857 very good with original leather pouch; small KEUFFEL & ESSER 4053-3 PAT JUNE 5, 1900, rule is very good, case is missing part of the leather flap at the top; EUGENE DIETZGEN CO. MANIPHASE MULTIPLEX CAT. NO. 1735 PATS 2,170,144 & 2,285,722, very good with original black case; and a small EUGENE DIETZGEN with one beveled edge, very good, no case.

8 - OHIO TOOL CO. 7/8-inch No. 43 1/2 complex molding OHIO TOOL CO. 7/8-inch No. 43 1/2 complex molding plane, complete and very good.

9 - CRAFTSMAN No. 3730 iron rabbet and fillister plane CRAFTSMAN No. 3730 iron rabbet and fillister plane complete with original fence depth stop and original box with some soiling, plane is fine.

10 - Three iron and/or steel block planes: SARGENT with Three iron and/or steel block planes: SARGENT with broken lateral-adjuster lever, some light rust, will clean to very good overall; a SHELTON with chunk of lever cap broken off, good usable condition; and a Stanley #118 unbreakable plane like those used in school shops.

11 - COPELAND & CO. complex molding plane marked 1/2 an COPELAND & CO. complex molding plane marked 1/2 and 1 1/4 on heel, wedge broken and nailed, good boxing, will make good user.

12 - Union 14-inch No. 5-sized iron jack plane, has som Union 14-inch No. 5-sized iron jack plane, has some light surface rust to exposed surfaces, will clean to fine overall.

13 - CASEY & CO. AUBURN N.Y. screw-adjusting sash plane CASEY & CO. AUBURN N.Y. screw-adjusting sash plane with brass diamond-shaped pieces on the side that the adjuster screws pass thru, very good overall.

14 - Stanley rosewood and brass sliding bevel with 12-i Stanley rosewood and brass sliding bevel with 12-inch blade, some very light patches of surface rust, will clean to very good.

15 - Z.J. M’MASTER No. 28 handled tongue plane with adj Z.J. M’MASTER No. 28 handled tongue plane with adjustable fence on bottom, very good overall.

16 - Three 26-inch hand saws including THE REX No. 66 b Three 26-inch hand saws including THE REX No. 66 by Atkins with 6ppi blade, fine etch, very good overall; ENTERPRISE with faint etch, scale acid etched into top of blade, very good overall; and an unknown make with 11ppi blade, very good overall.

17 - Small metal tool box with one removable tray, asso Small metal tool box with one removable tray, assorted tools inside, outside of the box has MINI BIKE PARTS painted on it, nice leather top handle, very good overall.

18 - CRAFTSMAN tool bag full of tools including butt ch CRAFTSMAN tool bag full of tools including butt chisel, three 12-oz. claw hammers; Crescent wrench; etc.

19 - CLIMAX metal tool box with one removable tray cont CLIMAX metal tool box with one removable tray containing numerous tools including what looks like a paring knife marked C.S. OSBORNE, small 1/4-in. drive ratchet, etc. very good overall.

20 - One new old stock Richard’s Steel Single Track HOU One new old stock Richard’s Steel Single Track HOUSE DOOR HANGER, in original wooden shipping crate with partial label on side.

21 - Sears Happi Time wall-mounting steel tool cabinet Sears Happi Time wall-mounting steel tool cabinet with two doors that fold open, very good overall.

22 - Quick action woodworker’s vise painted baby blue, Quick action woodworker’s vise painted baby blue, very good overall.

23 - Craftsman metal tool box 25 x 10 x 11 with two sli Craftsman metal tool box 25 x 10 x 11 with two sliding drawers that are secured when the lid is closed just like an old machinist box, has folding handles on each end, needs a light cleaning, very good overall.

24 - Fine 26-inch Millers Falls miter box saw made by L Fine 26-inch Millers Falls miter box saw made by LANGDON MITER BOX CO. very good overall.

25 - Rare folding seat from the Marshall Field Store in Rare folding seat from the Marshall Field Store in Chicago, stands 22-inches high when open, some rust around the base, will clean to fine overall.

26 - Pair of saws: Geo Bishop & Co. 24-inch miter box s Pair of saws: Geo Bishop & Co. 24-inch miter box saw, complete and fine; and a 20 1/2-inch Disston panel saw, no etch visible, has plastic blade protector, very good overall.

27 - Rare folding round wooden seat from the make-up co Rare folding round wooden seat from the make-up counter at Marshall Field Department Store in Chicago Illinois, comes with mounting bracket.

28 - Pair of Stanley iron bench planes: #3 with two han Pair of Stanley iron bench planes: #3 with two hang holes alongside the knob, late BB-logo iron, STANLEY name in orange background, will make fine user; and a #4 WWII model with hard rubber adjuster nut, stained hardwood tote and knob, very good overall.

29 - Three iron block planes: DUNLAP 7-inch with screw- Three iron block planes: DUNLAP 7-inch with screw-adjusted blade, very good overall; Stanley HANDYMAN #110-style with most of the original decal on lever cap, blade needs light cleaning, very good overall; and a Stanley 7-inch with adjustable throat and blade adjuster, very good overall.

30 - Stanley #5C iron jack plane with very nice rosewoo Stanley #5C iron jack plane with very nice rosewood tote and knob, very good BB-logo blade, fine overall.

31 - Three block planes: CRAFTSMAN (Stanley 9 1/2) with Three block planes: CRAFTSMAN (Stanley 9 1/2) with adjustable throat, very good; Sargent #5206 unbreakable made with pressed steel body; and a Dunlap Approved (Sargent) 7-inch with screw-operated blade adjuster, nickeled cap, very good overall.

32 - Stanley #5 1/2C wide body jack plane, scuffed but Stanley #5 1/2C wide body jack plane, scuffed but intact tote and knob, very good overall.

33 - Stanley #1 Odd Jobs with intact scribe, point at t Stanley #1 Odd Jobs with intact scribe, point at top needs to be replaced, comes with Stanley #62 brass-bound 4-fold rule, very good overall.

34 - Unusual JORDAN GERMANY #75 bullnose rabbet plane, Unusual JORDAN GERMANY #75 bullnose rabbet plane, complete and fine.

35 - Unusual Stanley S4 Steel smooth plane Unusual Stanley S4 Steel smooth plane, tote broken and scuffed knob, good SW-logo iron, good overall.

36 - Small toy-sized bullnose rabbet plane, made from a Small toy-sized bullnose rabbet plane, made from a broken Stanley #101, has red lever cap and BB-logo blade, very good overall.

37 - Stanley #79 early side rabbet plane MADE IN USA, t Stanley #79 early side rabbet plane MADE IN USA, this was made prior to the one offering an adjustable fence, nice BB-logo blades, very good overall.

38 - Stanley #6C iron fore plane, fine tote and knob, g Stanley #6C iron fore plane, fine tote and knob, good Q-logo blade, small chip in edge of lever cap, fine overall.

39 - Three iron spokeshaves: Stanley #52 with RULE & LE Three iron spokeshaves: Stanley #52 with RULE & LEVEL blade, very good overall; Stanley #64 with SW-logo blade, very good; and a STEARNS with the company name embossed in the lever cap, fine.

40 - Stanley #7C Type 11 iron jointer plane proper V-lo Stanley #7C Type 11 iron jointer plane proper V-logo blade, fine rosewood tote and low knob, very good to fine overall.

41 - Unusual JORDAN GERMANY iron smooth plane, complete Unusual JORDAN GERMANY iron smooth plane, complete and very good overall.

42 - Nice 7 1/2-inch iron corebox plane with fine lamin Nice 7 1/2-inch iron corebox plane with fine laminated handles, very good overall.

43 - Fine Stanley #191 and 192 iron rabbet planes; both Fine Stanley #191 and 192 iron rabbet planes; both have intact depth stops and very good blades, a great pair.

44 - FINE Sandusky Tool Co. lignum sun plane No. 239, l FINE Sandusky Tool Co. lignum sun plane No. 239, little if ever used. The best we have seen or sold.

45 - Pair of D.R. BARTON round molding planes Nos. 12 & Pair of D.R. BARTON round molding planes Nos. 12 & 18, both complete and very good.

46 - Shipwright’s 16-inch rosewood razee-type jack plan Shipwright’s 16-inch rosewood razee-type jack plane, close handle is missing a piece.

47 - Unusual SLOAD TOOL CO. MANUAL TRANING wooden jack Unusual SLOAD TOOL CO. MANUAL TRANING wooden jack plane with somewhat crude replacement handle, proper MANUAL TRAINING blade, very good overall.

48 - Nice 30-inch wooden jointer plane with closed hand Nice 30-inch wooden jointer plane with closed handle marked J. KNOWLTON on toe, nice W. GREAVES & SONS 2 3/4-inch blade with SHEAF WORKS cap iron, fine overall.

49 - Pair of zircote (Mexican Rosewood) winding sticks Pair of zircote (Mexican Rosewood) winding sticks with ebony and holly sights, very well made.

50 - Millers Falls Langdon shoot board and plane, the c Millers Falls Langdon shoot board and plane, the center locking nut for the fence has been expertly repaired and the lift lever for the quadrant or fence is missing but the fence can be moved and locked into place, the plane is complete and fine.

51 - Keen Kutter K5 1/2C wide body jack plane made by S Keen Kutter K5 1/2C wide body jack plane made by Stanley on the early-style Bedrock frame, very good overall.

52 - Lot: wooden jointers mallet and three sharpening s Lot: wooden jointers mallet and three sharpening stones.

53 - Three sliding bevels: Stanley #25 with 6-in. blade Three sliding bevels: Stanley #25 with 6-in. blade, SW logo, rosewood handle, very good; Sargents Patent with 6-inch blade, good japanning, nice blade, very good overall; and a VERITAS with 4-inch blade, has a Hold-Fast-Type clamp, near new.

54 - Large sharpening stone in 2-piece wooden box, very Large sharpening stone in 2-piece wooden box, very good.

55 - Pair of planemaker’s floats and a gun maker's rasp Pair of planemaker’s floats and a gun maker's rasp for letting in barrels.

56 - Lot: small gimlet bit with iron handle; saw punch; Lot: small gimlet bit with iron handle; saw punch; small tapered reamer; and a 4 1/2-inch pair of Vise-Grip pliers that are like new.

57 - Six assorted screwdrivers including a long SNAP-ON Six assorted screwdrivers including a long SNAP-ON SSD 4100; four SHEFFIELD cabinet screwdrivers with wooden handles, all like new; and a Stanley 66-113 with plastic handle, very good.

58 - Large CARBORUNDUM No. 3 bench grinder with separat Large CARBORUNDUM No. 3 bench grinder with separate clamp that holds it to a bench or table, complete and very good with intact tool rest.

59 - Lot: Millers Falls No. 525 keyhole saw, adjustable Lot: Millers Falls No. 525 keyhole saw, adjustable gear puller and two machinist clamps the smaller by Starrett and larger by Brown & Sharpel.

60 - Pair of unusual 10-in. sliding bevels: Star Tool C Pair of unusual 10-in. sliding bevels: Star Tool Co. and STANDARD RULE CO. both with rosewood handles and both very good.

61 - Three rosewood tool handles: large Millers Falls f Three rosewood tool handles: large Millers Falls full of bits, very good; smaller Millers Falls with no bits, and J.S. FRAY & CO with one bit and missing the cap from the end of the handle, has a few thread chips, very good overall.

62 - Three assorted sharpening stones all in 2-piece wo Three assorted sharpening stones all in 2-piece wooden boxes. All are very good.

63 - Large flat full of NOS hardware including wardrobe Large flat full of NOS hardware including wardrobe locks; box catches, ball tip butts; brass escutcheon pins, screws, brads, etc. All came out of old hardware stores in St. Louis and Chicago.

64 - Oak cabinet out of old hardware store measures 57 Oak cabinet out of old hardware store measures 57 x 27 x 12 and has hinged door with 5 panes of glass, there is currently one wooden shelf inside but there are enough pins to support three more, or you can convert this one into a nice gun or display case or cabinet.

65 - Box lot of assorted vintage hardware including hin Box lot of assorted vintage hardware including hinges; mending straps, oval head brass screws, sash fasteners, gold lacquered escutcheons, case locks, blued steel wood screws, etc. All came out of old St. Louis and Chicago hardware stores.

66 - Nice wooden tool chest with trestle or stand, two Nice wooden tool chest with trestle or stand, two doors, the one on the left has two shelves that can be adjusted; two sliding drawers in the top, four smaller drawers on the right; three shelves on the upper left that can be slid into and out of several different slots, one regular shelf that sits on four pins on the bottom left and two adjustable shelves on the lower right. We had to cut off the original lock, but the brass hasp is still present and is very good. This a deep box and will take up some room, but it was well made and will hold a lot of tools.

67 - Assorted boxes of NOS hardware including clout nai Assorted boxes of NOS hardware including clout nails (for shoemaking), nickeled cupboard catches; drawer locks, wardrobe locks; offset cabinet hinges; showcase hinges, etc. All out of old hardware stores in Chicago and St. Louis.

68 - Oak cabinet out of old hardware store measures 56 Oak cabinet out of old hardware store measures 56 x 26 x 12, currently has two wooden shelves installed, built in lock and glass pull on door, very good, has four extra holes in upper left corner of door frame and one thru the left side where a secondary locking mechanism was once mounted. Additional shelves can be installed and they are supported with pin-type shelf supports, a very nice case as it is, or you can turn it into a nice little gun or display case.

69 - Flat full of boxes of NOS hardware including Stanl Flat full of boxes of NOS hardware including Stanley #33 Spring Catch; Stanley folding brackets 8x8 (two boxes); 1 3/4 Slotted Flat Head Steel 14 wood screws; Stanley #30C cabinet spring catches; Corbin No. 3R6 Rim Night Latch; Stanley #810 table hinges; Stanley #904 2-inch light T-Hinges, etc. All out of early St. Louis and Chicago hardware stores.

70 - Scarce Millers Falls No. 97 multi-speed bread dril Scarce Millers Falls No. 97 multi-speed breast drill with 3-jaw chuck, intact auxiliary handle and intact auxiliary breast plate, very good overall.

71 - Three small saws: Millers Falls No. 47 coping saw, Three small saws: Millers Falls No. 47 coping saw, very good; GERMANY NO. 40 jeweler’s drill, blade broken, very good; DIXON GERMANY No. 21 adjustable saw that needs a light cleaning; and an adjustable hollow auger with intact depth stop, very good.

72 - Nice Goodell Pratt 2-speed hand drill with 3-jaw c Nice Goodell Pratt 2-speed hand drill with 3-jaw chuck, nice rosewood or cocobolo handle, no bits inside the handle, very good overall.

73 - Unusual brass micro-adjusting marking gage, very g Unusual brass micro-adjusting marking gage, very good.

74 - Pair of eggbeater hand drills: Millers Falls No. 5 Pair of eggbeater hand drills: Millers Falls No. 5A complete with set of bits inside handle, partial decal on main handle, fine overall; and a small GOODELL-PRATT that is complete and very good.

75 - Unusual and perhaps unique hardware salesmen’s cat Unusual and perhaps unique hardware salesmen’s catalog from the 1870s and 1880s. The salesmen who had it bound was HENRY MARX, it includes pad locks, bitstock tools, planes and variety of other hardware by STANLEY, SARGENT, NORTH BROTHERS, GOODELL and many other manufactures, comes with a box that the catalog no longer fits into but once did.

76 - Pair of small GOODELL-PRATT eggbeater hand drills, Pair of small GOODELL-PRATT eggbeater hand drills, both are complete and fine.

77 - Six pairs of plier or plier-like tools: KRAEUTER 1 Six pairs of plier or plier-like tools: KRAEUTER 1840-8 complete and very good; FULLERS ENGLAND plier with side cutter, very good; and an umarked pair of end cutters of nippers; CRESCENT 654 7-inch needle nose, very good; CHAMPION DEARMENT No. 515 pliers, very good; and a nice pair of Craftsman duck bill pliers.

78 - Fine homemade hand drill with nice wooden main and Fine homemade hand drill with nice wooden main and auxiliary handles, even the chuck was homemade, a finely executed piece.

79 - UNIQUE ratcheting offset screwdriver by WILL B. LA UNIQUE ratcheting offset screwdriver by WILL B. LANE CHICAGO ILL U.S.A. PAT. JAN. 14, ’08, very good.

80 - Fine LUFKIN No. 42 ships bevel with two brass blad Fine LUFKIN No. 42 ships bevel with two brass blades, does not appear to have been used.

81 - Lot: Small WOOD GOODS catalog of Union Hardware Mf Lot: Small WOOD GOODS catalog of Union Hardware Mfg. Torrington, Conn. and two AFL - CIO Union Constitution booklets.

82 - Stanley #36 1/2 caliper rule, complete and good ov Stanley #36 1/2 caliper rule, complete and good overall.

83 - Seven assorted pairs of dividers and outside calip Seven assorted pairs of dividers and outside calipers including ones by Wm JOHNSON; E.C. SIMMMONS; CHARLES B. MAY SPRINGFIELD MASS; and PEXTO.

84 - THE CORNER PLUMB and level by PEERLESS LEVEL & TOO THE CORNER PLUMB and level by PEERLESS LEVEL & TOOL CO. Sterling, Ill, in original box bottom, fine plumb & level.

85 - Lot of seven smaller dividers and inside calipers Lot of seven smaller dividers and inside calipers by makers such as SARGENT & CO.; STANLEY #57; CRAFTSMAN; FULTON; STARRETT; YANKEE with 1885 patent date, etc.

86 - Five Starrett pin vises in a Starrett box, all ver Five Starrett pin vises in a Starrett box, all very good including the box.

87 - Six assorted T-handled gimlet bits, all very good. Six assorted T-handled gimlet bits, all very good.

88 - Pair of small claw hammers: PLUMB & CRAFTSMAN, bo Pair of small claw hammers: PLUMB & CRAFTSMAN, both very good.

89 - Stanley #103 24-inch wooden level, intact vial, ve Stanley #103 24-inch wooden level, intact vial, very good overall; and a homemade ball peen hammer, very good.

90 - Lot of tool & die maker or machinist tools: three Lot of tool & die maker or machinist tools: three parallel bars; one with owners name in it; and a box of standards for measuring holes.

91 - HARGRAVE double spokeshave with both flat and conc HARGRAVE double spokeshave with both flat and concave bottoms, complete and fine.

92 - Nice rosewood shoulder plane with brass bottom and Nice rosewood shoulder plane with brass bottom and homemade blade, plane was restored and blade made by Robbie Field.

93 - Pair of wooden spokeshaves: the larger one is mark Pair of wooden spokeshaves: the larger one is marked JAMES BEE SHEFFIELD has a hang hole in one end, very good overall; and the other is unmarked and is fine.

94 - Type I Stanley try square with 8-inch blade, very Type I Stanley try square with 8-inch blade, very good overall.

95 - E.C. STEARNS & CO. jointer gauge or fence for iron E.C. STEARNS & CO. jointer gauge or fence for iron bench planes, complete and very good.

96 - Three rosewood handled layout tools: Disston No. 1 Three rosewood handled layout tools: Disston No. 1 try square with 6-inch blade, fine; Stanley try and miter square with 4-inch blade, complete and fine; and a Stanley #25 bevel with 8-inch blade, nice bluing on blade, fine overall.

97 - Luthier’s peg hole reamer with very nice handle. Luthier’s peg hole reamer with very nice handle.

98 - Stanley #60 double shave with RULE & LEVEL CO. bla Stanley #60 double shave with RULE & LEVEL CO. blades, very good overall.

99 - Union Twist Drill Co. drill bit stand, very good o Union Twist Drill Co. drill bit stand, very good overall.

100 - Unmarked Stanley bevel with 12-inch blade, fine ov Unmarked Stanley bevel with 12-inch blade, fine overall.

101 - Three Stanley layout tools: nickel plated try squa Three Stanley layout tools: nickel plated try square with 4-inch blade, has hang hole in handle, very good overall; and an early miter square with 8-inch blade, very good overall; and a rosewood handled Stanley try square with 4 1/2-inch blade, fine.

102 - Large rosewood handled try square with 18-inch bla Large rosewood handled try square with 18-inch blade, very good overall.

103 - Three keyhole saws, the smallest has a fish-tail h Three keyhole saws, the smallest has a fish-tail handle and two split nuts securing the short blade.

104 - Small OAK LEAF (G0ODELL-PRATT) hand drill with nic Small OAK LEAF (G0ODELL-PRATT) hand drill with nickel plated handle that can be unscrewed and have bits stored inside, no bits included, very good overall.

105 - Unusual Millers Falls No. 6 hack saw, complete and Unusual Millers Falls No. 6 hack saw, complete and very good.

106 - Pair of eggbeater hand drills: CRAFTSMAN (Millers Pair of eggbeater hand drills: CRAFTSMAN (Millers Falls) with 3-jaw chuck, no bits inside wooden storage handle, fine overall; and a Goodell-Pratt Toolsmiths 3-jaw model, complete and fine.

107 - VERITAS FLUSH PLANE (scraper?) complete and very g VERITAS FLUSH PLANE (scraper?) complete and very good.

108 - Unknown make try square with 11-inch blade and hav Unknown make try square with 11-inch blade and having a dark rosewood or ebony handle that has a few cracks, nice brass face, good overall.

109 - Two push drills: Goodell-Pratt No. 188A push drill Two push drills: Goodell-Pratt No. 188A push drill with original albeit rough box, handle is full of bits and body is marked PAT APPL’D FOR, a fine drill in a so box: and a Goodell-Pratt marked push drill in a Millers Falls No. 29 box, box end with label has come loose and will need to be repaired.

110 - Stanley #100MM Miter Machine new in original box, Stanley #100MM Miter Machine new in original box, dead mint condition. This is the first time we can recall selling one of these in the original cardboard box. It’s a later model with the blue paint but it is complete with all original parts including the rule, clamp, 24-inch saw, etc. They do not come any better.

111 - Pair of unusual twin-beam marking gages; the one o Pair of unusual twin-beam marking gages; the one on the left has both wedges and tapered lock, it is very good; the other is missing the wedges and tapered locking wedge.

112 - Four keyhole saws including a rare Disston & Sons Four keyhole saws including a rare Disston & Sons model.

113 - Stanley #31 24-inch transitional jointer plane, to Stanley #31 24-inch transitional jointer plane, tote of tote spur broken off, will clean to very good overall.

114 - Three transitional jack planes: BIRMINGHAM Patent, Three transitional jack planes: BIRMINGHAM Patent, missing tote and three of the screws that secure the iron frame to the wooden bed; UNION No. 27 with light to moderate rust on iron and chip breaker, will clean to very good overall; and a Sargent No. 3416 that has light to moderate rust on blade and chip breaker, will clean to very good.

115 - Sargent #722C Auto-Set jointer plane with tilting Sargent #722C Auto-Set jointer plane with tilting front knob, very good tote, just traces of original japanning remain, will clean to good or better usable condition.

116 - Three wooden planes: Sandusky Tool Co. No. 13 sing Three wooden planes: Sandusky Tool Co. No. 13 single iron jack plane, light rust on blade, will clean to very good; OHIO TOOL CO. No. 90 1/2 single iron nosing plane, some rust on iron, very good overall; and an OHIO TOOL CO. wooden smooth plane, light to moderate rust on blade and chip breaker, will clean to very good.

117 - Pair of 18-inch iron fore planes: Gage G6, nice to Pair of 18-inch iron fore planes: Gage G6, nice tote and tall knob, light rust to exposed surfaces, will clean to fine overall; and a Chaplin’s Patent No. 1208C missing the hard rubber tote, good knob, light rust to exposed surfaces, will clean to very good.

118 - Stanley S5 steel jack plane, good SW-logo blade, n Stanley S5 steel jack plane, good SW-logo blade, nice tote and small knob, with light cleaning will be very good.

119 - FULTON (Sargent) No. 5329 combination plow plane w FULTON (Sargent) No. 5329 combination plow plane with set of blades in canvas roll, tatty instruction pamphlet, all inside a soiled, scuffed and worn original box with partial label, will make a very good user.

120 - Stanley #11 belt plane, complete and very good. Stanley #11 belt plane, complete and very good.

121 - Pair of iron smooth planes: Stanley #3 with two pa Pair of iron smooth planes: Stanley #3 with two patent dates behind bed, fine rosewood tote and low knob, light surface rust, will clean to fine; and a Stanley #4C with S casting mark behind frog, tote missing, light rust.

122 - Stanley 4 1/2 wide body smooth plane, was found in Stanley 4 1/2 wide body smooth plane, was found in a damp basement and most of the exposed surfaces are covered with light to moderate rust, will clean to at least good condition.

123 - Massive 14-inch drawknife with light rust covering Massive 14-inch drawknife with light rust covering the maker’s mark, will clean to fine overall, comes with wooden blade protector.

124 - Stanley #71 1/2 router plane with Stanley name in Stanley #71 1/2 router plane with Stanley name in script, comes with 1/2-inch blade, light rust, will clean to very good overall.

125 - Nice and early W. BUTCHER 11-inch drawknife, comes Nice and early W. BUTCHER 11-inch drawknife, comes with piece of garden hose to protect edge of blade, very good overall.

126 - MARSHALL GLASGOW wedge-arm fillister plane with br MARSHALL GLASGOW wedge-arm fillister plane with brass tipped arms, screw-operated depth stop, fine overall.

127 - Coachmaker’s router with 1 1/2-inch blade, some ru Coachmaker’s router with 1 1/2-inch blade, some rust, will clean to very good.

128 - Stanley #13 compass plane, some light rust to expo Stanley #13 compass plane, some light rust to exposed surfaces, will clean to very good overall.

129 - Wilkinson Patent drawknife with 8-inch blade, has Wilkinson Patent drawknife with 8-inch blade, has some rust, will clean to very good usable condition.

130 - OHIO TOOL CO. handled screw-arm plow plane with sc OHIO TOOL CO. handled screw-arm plow plane with screw-operated depth stop, numerous thread chips, all four nuts are good; rear bracket that attaches fence to arm is cracked, can be restored to usable condition.

131 - Three wooden molding planes: No. 1 sash with faint LONDON maker’s mark that has been over struck with an owners stamp, wedge a likely but well executed replacement, tiny bit of cutter remains; A.MACKIE, 30 VICTORIA ST. EDINBURGH 1/2-inch single-boxed side bead, fine; and a D. MALLOCH PERTH 3/4-inch plow, no blade, very good overall.

132 - Stanley #181 Type I iron rabbet plane with patent Stanley #181 Type I iron rabbet plane with patent NOV 18 1884 patent date on blade intact depth stop, very good overall.

133 - Fine spokeshave with adjustable throat has decorat Fine spokeshave with adjustable throat has decorative frame.

134 - Scarce MARSH M5 1/2 wide body jack plane, complete Scarce MARSH M5 1/2 wide body jack plane, complete with original 2 1/4-inch blade, fine tote and knob, very good overall.

135 - D.R. BARTON coopers shave, name of company cast in D.R. BARTON coopers shave, name of company cast into cap nice wing nuts, very good wooden handles, very good overall.

136 - Keen Kutter K5C iron jack plane with Stanley BB-lo Keen Kutter K5C iron jack plane with Stanley BB-logo blade, tote broken at base, good knob, will make very good user.

137 - Unusual Stanley 8-inch nickel plated smoother with Unusual Stanley 8-inch nickel plated smoother with beech handles, V-logo blade, Stanley lever cap with orange painted background, DEFIANCE-type pressed-steel smooth plane, very good overall.

138 - Large J.H. HALL NASHUA N.H. twin-bladed shoot or c Large J.H. HALL NASHUA N.H. twin-bladed shoot or chute board plane, very good overall.

139 - Early Stanley #12 cabinet scraper, has 1858 Patent Early Stanley #12 cabinet scraper, has 1858 Patent date in adjuster lock nut, has had part of blade holder recast in brass, a nice early repair, throat has a chuck missing, good overall.

140 - Three D.R. BARTON gouges that are like new 1-in; 1 Three D.R. BARTON gouges that are like new 1-in; 1 1/4; and 1 1/2-inch all have very nicely turned handles with brass ferrules.

141 - Siegley #4 corrugated iron smooth plane with prope Siegley #4 corrugated iron smooth plane with proper SIEGLEY iron, very good overall.

142 - PLANEMASTER iron rabbet plane with fence, MADE IN PLANEMASTER iron rabbet plane with fence, MADE IN ENGLAND, very good overall.

143 - Stanley GAGE G4 smooth plane, complete and very go Stanley GAGE G4 smooth plane, complete and very good.

144 - Pair of leather shaves; one a Snell & Atherton edg Pair of leather shaves; one a Snell & Atherton edge trimmer with fence; both are very good.

145 - Ohio Tool Co. No. 04 iron smooth plane with good t Ohio Tool Co. No. 04 iron smooth plane with good tote and low knob, nice globe-logo blade, has small hang hole in toe, very good overall.

146 - Pair of Stanley iron shaves: #55 concave sole with Pair of Stanley iron shaves: #55 concave sole with BB-logo blade, fine; and a #68 rabbet shave with one welded handle, fine BB-logo blade, will make a good user.

147 - Pair of iron jack planes including MARSH M5, compl Pair of iron jack planes including MARSH M5, complete and very good; and a Stanley #5C with very good rosewood tote and low knob, very good overall.

148 - Pair of leather shaves including I.P. HYDE edge tr Pair of leather shaves including I.P. HYDE edge trimmer with brass fence, very good.

149 - Stanley #53 iron spokeshave with adjustable throat Stanley #53 iron spokeshave with adjustable throat, complete and very good.

150 - Very nice CRICKET treadle-operated scroll saw, wit Very nice CRICKET treadle-operated scroll saw, with nice original red pin striping, very good overall.

151 - Scarce Stanley #83 razor shave, complete and very Scarce Stanley #83 razor shave, complete and very good overall.

152 - Stanley #3 Type 11 iron smooth plane, very good SW Stanley #3 Type 11 iron smooth plane, very good SW-logo blade, very good overall.

153 - Millers Falls rosewood handled “cigar” spokeshave, Millers Falls rosewood handled “cigar” spokeshave, complete and very good.

154 - Nice solid boxwood smooth plane with unmarked blad Nice solid boxwood smooth plane with unmarked blade and cap iron, has owners name and location stamped at toe, very good overall.

155 - Small wooden box filled with pinch dogs and a magn Small wooden box filled with pinch dogs and a magnet used to get them out of the box.

156 - Set of ebony radius gauges, very good. Set of ebony radius gauges, very good.

157 - Dutch-style wooden smooth plane made by PETE CALLE Dutch-style wooden smooth plane made by PETE CALLEN MILWAUKEE has rear handle and front knob, has ERIK ANTON BERG ESKILSTUNA iron with shark logo, very good.

158 - Ebony and brass Ultimatum-style marking and mortis Ebony and brass Ultimatum-style marking and mortise gauge, needs all the points replaced as all are badly worn, the wood and brass is fine.

159 - Lot: three tape measures including a Disston Carls Lot: three tape measures including a Disston Carlson 16-foot Contractors Rule No. 4516C, good; Defiance by Stanley No. 1261 very good; small Stanley tape with advertising on plastic case MAKE IT A RULE TO CALL TRUMAN MINE SUPPLY PO BOX 815 CRAB ORCHARD, W.V., very good; and two loops in a steel case.

160 - Nicely made round wooden mallet, very good; plus a Nicely made round wooden mallet, very good; plus a brush with wooden backing that is in the shape of a bottle, very good.

161 - Small JORGENSEN PATENT 4/0 wooden clamp with steel Small JORGENSEN PATENT 4/0 wooden clamp with steel screws, fine overall.

162 - LOT: SEARS wooden box with misc. fasteners and fur LOT: SEARS wooden box with misc. fasteners and furniture hardware; and a pasteboard box of 1/2 doz. No. 2887P Wrought Bronze Metal SASH LIFTS packed with screws, very good.

163 - Scarce 8-inch VLCHEK AV6 6-inch Click-Stop Crescen Scarce 8-inch VLCHEK AV6 6-inch Click-Stop Crescent-type wrench in original box, wrench is like new, box is very good.

164 - Nice BUELL TOOL CO rosewood tool handle full of bi Nice BUELL TOOL CO rosewood tool handle full of bits, fine overall; and a MILLERS FALLS CO. No. 185A push drill with at least four of the original bits inside the handle, fine overall.

165 - Small 4.5-inch HELLER BROTHERS CO. Newark N.J. min Small 4.5-inch HELLER BROTHERS CO. Newark N.J. miniature rasp, comes with BAKELITE-type sleeve marked COMPLIMENTS HELLER BROTHERS CO. HORSE RASPS, FILES, TOOLS & STEEL, very unusual and very good.

166 - Stanley #400 picture frame miter vise, mounted to Stanley #400 picture frame miter vise, mounted to a piece of wood, very good overall.

167 - LUFKIN X46 RED END zig zag rule with brass slide, LUFKIN X46 RED END zig zag rule with brass slide, complete and fine; plus a Starrett No. 46 simple depth gage in original box, fine to near new.

168 - SAFE PADLOCK & HARDWARE CO. box of 1/2 dozen 03265 SAFE PADLOCK & HARDWARE CO. box of 1/2 dozen 03265-3 Bright Brass 10-inch CASEMENT ADJUSTERS, all very good.

169 - Black & Decker WORKMATE portable work bench, has s Black & Decker WORKMATE portable work bench, has some paint splatters but is in very good overall condition.

170 - Stanley #358 miter box complete with all guides ha Stanley #358 miter box complete with all guides has roller bearings, trip stop still on the back of the saw to drop the saw onto the work piece, has fine etch on 28-inch blade MADE FOR STANLEY BY HENRY DISSTON & SONS PHILADELPHIA, about the nicest Stanley miter box we’ve ever sold.

171 - Four items in original boxes: STANLEY #794 folding Four items in original boxes: STANLEY #794 folding brackets, new; NICHOLSON file box with four assorted files; EBERHARD FABER POLITA STEEL POLISH box with two of the original twelve pieces inside; and a LUFKIN MITI-MITE No. 124 HANDI MAGNIFIER.

172 - DIAMOND G57 7-inch end cutting nippers new in orig DIAMOND G57 7-inch end cutting nippers new in original albeit scuffed box.

173 - Unusual wooden and rope clamp for clamping round i Unusual wooden and rope clamp for clamping round items; plus a Cincinnati Tool Co. 20-inch adjustable bar clamp, fine.

174 - Glass dome used by a watchmaker to cover a piece b Glass dome used by a watchmaker to cover a piece being worked on or a pile of parts, very good.

175 - Stanley #32 transitional 26-inch jointer plane, li Stanley #32 transitional 26-inch jointer plane, light rust on blade, very good overall.

176 - Pair of Sargent 9-inch smooth planes: #409C with s Pair of Sargent 9-inch smooth planes: #409C with some light pitting on sides and sole; good VBM lever cap and good original blade, tote spur broken off, will make good user; and a #409 with very good tote and beaded knob, just needs a light dusting, fine overall.

177 - Nice barn-beam boring machine with egg-shaped wood Nice barn-beam boring machine with egg-shaped wooden handles, nice wooden base, one bit included, will make a very good user.

178 - Lot of 3 braces: 2 ratchet & 1 corner Lot of three braces: two ratchet braces one with DUNLAP decal on wrist handle and a user-made corner brace with rubber end on handle top pad or handle sawed off to allow it to work up close to a wall. All will make good users.

179 - Small homemade drawknife & 2-handled scorp Small homemade drawknife, very good, and a factory-made 2-handled scorp in like-new condition.

180 - Gage Tool Co. No. 2 transitional smooth plane Gage Tool Co. No. 2 transitional smooth plane, replaced tote and knob, very good overall.

181 - Pair of drawknives Pair of drawknives: 8-inch L&I.J. WHITE coopers-type very good and a HART MFG. CO. 8-inch with a few patches of mild pitting, good overall.

182 - Gage Tool Co. No. 4 transitional smooth plane Gage Tool Co. No. 4 transitional smooth plane, has owners initials E.E.G. stamped into toe and heel, complete and fine overall.

183 - Fine Wm. Johnson curved 2-handled scorp Fine Wm. Johnson curved 2-handled scorp. Will be great for hogging out those chair seats.

184 - Unknown make leather skiver Unknown make leather skiver mounted to a piece of wood. This one has some light rust and a few nicks in the cutting edge of the blade, a good cleaning and a sharpening will get it back to usable condition.

185 - Leather rounder used to make reins & saw punch Pair of tools: on top is a leather rounder used to make reins or whips, it turns square pieces of leather into round ones but drawing it thru the different sized holes, it is in very good overall condition. The other tool is most likely a saw punch used to make butcher saw blades. It has an intact spring.

186 - Lot of 12 assorted tools Lot of 12 assorted tool we believe are scrapers for lead babbitt bearings.

187 - Stanley #113 compass plane Stanley #113 compass plane with the 9.8.03 patent date on the left side gear, complete and very good; plus a Stanley #40 scrub plane body with fine tote and early-style knob, just add your own blade and lever cap and it’s good to go.

188 - Early telephone with extendable holder Early telephone with extendable holder that can swivel on the attached bracket, has old cloth loom wiring, has patent dates from the 1901-1904 time period, no ear piece. The owner’s tag that was on it when we got it said it was from the railroad. It’s the first we’ve seen or sold.

190 - Early telephone with extendable holder Early telephone with extendable holder that can swivel on the attached bracket that is mounted to a piece of wood, comes with head set with Western Electric ear piece. A very nice early railroad? telephone that will display nicely in your home, office or workshop.

191 - Lot of machinist-tool catalogs Lot of machinist-tool catalogs: Lufkin Measuring Tapes Rules and Tape Rules Catalog No. 104, some cover wear, very good overall; Lufkin Catalog No. 7, complete and very good; Lufkin Precision Tools Catalog No. 8, very good; New Lufkin Precision Tools; and three Lufkin price lists: one from Aug 14, 1947; and two from April 6, 1959.

192 - Pair of instrument catalogs Pair of instrument catalogs: KEUFFEL & ESSER CANADIAN Price-List Applying to Catalogue 37th Edition, very good; and Astronomical And Engineering Instruments Bausch, Lomb, Saegmuller Co. Rochester NY, original 1907 catalog filled with nice illustrations of come neat instruments.

193 - Lot of machinist-tool catalogs Lot of machinist-tool catalogs: Starrett Tools Catalog No. 21, rear cover separated, font soiled; Lufkin Tools catalog No. 7, complete and very good; Lufkin Tools catalog 12C covers worn and soiled; Lufkin Catalog No. 8 complete and very good; a Lufkin Tool Catalog No. 7 soiled and worn.

194 - 1897 Catalogue, Cuyler & Mohler Jobbers of Iron Pi Original 1897 Illustrated Catalogue of Cuyler & Mohler Jobbers of Iron Pipe; Brass and Iron Goods For Water, Gas and Steam, Baltimore MD., a beautifully illustrated catalog filled with early bathroom fixtures, sinks, tubs, toilets and much more, very good overall.

195 - Two original catalogs: 1885 L.M. MUMSEY & Belknap Two original catalogs: 1885 L.M. MUMSEY MFG. CO. ST. LOUIS, CATALOGUE OF IRON WORKING TOOLS, machinist, foundry and blacksmith tools, nicely illustrated, the pages are starting to separate from the spine, should be sent to a conservator and secured before it is too far detreated; and a 1973 BELKAP department 1 number 273 hand and electric tools, some writing on the cover, very good overall.

196 - Original catalog, RICHMOND HARDWARE COMPANY Original catalog of the RICHMOND HARDWARE COMPANY of RICHMOND VIRGINIA WHOLESALE HARDWARE, CUTLERY and SPORTING GOODS, the first several pages of index are badly folded or missing altogether, the remaining pages show some degree of bending at the corners, there is a piece of paper inside that says “This book was used by Southern Rights Eady to order merchandise on River Road, Savage, S.C. (Later renamed Kingsburgh, S.C.) His store was in operation until around 1920. Katherine Hammond Hogg, Granddaughter, November 27, 1993.

197 - Nice wall-mounting tool cabinet dovetailed on the Nice wall-mounting tool cabinet dovetailed on the corners with built-in lock. This is the very chest that a high school industrial arts teacher worked out of for 30+ years, it comes with a smattering of tools, and a working key for the lock. The outside of the box is decorated with numerous signs, posters, and other things that reminded us of the guitar cases we’ve seen of touring musicians. A fine well made box with an interesting history.

198 - Two adjustable bar clamps: the one on top is a 36- Two adjustable bar clamps: the one on top is a 36-inch Hargrave? with faucet-type adjuster, very good; and on bottom is a 24-inch cam-lock type PAT FEB 8, ’81, very good.

199 - Wooden brace with one pad with iron chuck that squ Wooden brace with one pad with iron chuck that square shanked bits can be used in, comes with display stand, unusual and very good.

200 - Ultra rare pair of 20-inch HARTFORD adjustable cur Ultra rare pair of 20-inch HARTFORD adjustable curved bar clamps by the HARTFORD CLAMP CO. HARTFORD CT.

201 - Flat full of NOS hardware including boxes of brass Flat full of NOS hardware including boxes of brass wood screws; several boxes of cinche clinching shoe nails; round and flat headed brass wood screws; and an Edward DON & Company advertising measuring glass; everything in the photo is included.

202 - Unmarked wedge-arm plow plane with one blade, very Unmarked wedge-arm plow plane with one blade, very well made.

203 - Unknown make No. 134 screw adjusting sash plane, v Unknown make No. 134 screw adjusting sash plane, very good.

204 - Scarce Stanley #34 28-inch transitional jointer pl Scarce Stanley #34 28-inch transitional jointer plane, this is the longest of the bench planes Stanley offered, this one is complete and very good.

205 - Three wooden molding planes: Greenfield No. 394 to Three wooden molding planes: Greenfield No. 394 tongue cutter, very good; REED UTICA 1-in. tongue cutter, very good; and an OHIO TOOL 1/4-inch No. 37 side bead, very good.

206 - UNION No. 23 transitional smooth plane with light UNION No. 23 transitional smooth plane with light to moderate rust on blade and chip breaker, will clean to fine overall.

207 - Pair of wooden molding planes: OHIO TOOL CO. 1/2-i Pair of wooden molding planes: OHIO TOOL CO. 1/2-inch dado No. 48, has improper wedge, otherwise very good overall; and a skewed rabbet with EDINBURGH maker’s mark, good.

208 - Fine Stanley No. 45 combination plane with BB logo Fine Stanley No. 45 combination plane with BB logo on skate and STANLEY in gold lettering on left side of main handle, this is a complete plane in original pasteboard box with two boxes of blades, both sets of rods, comes with original screwdriver, cam, envelope of spare spurs, this is the one you’ve been waiting for if you’ve been waiting for the best.

209 - Early BAILEY VICTOR compass plane, the adjuster ha Early BAILEY VICTOR compass plane, the adjuster has been broken and it came with a piece of paper and a broken bracket that the owner was going to use to try to fix it, this one is scarce enough to be worth fixing up, but it’s also good for parts if you decide to part it out. The screw of the lever cap has the BAILEY VICTOR logo cast into it.

210 - Pair of smooth planes: Stanley #135 Liberty Bell c Pair of smooth planes: Stanley #135 Liberty Bell complete and very good; and a wooden NEW YORK TOOL CO. smoother with nice AUBURN TOOL CO. blade, very good overall.

211 - Four furniture books: WINDSOR CHAIRMAKING by Micha Four furniture books: WINDSOR CHAIRMAKING by Michael Dunbar; Better Homes and Gardens FURNITURE PROJECTS; HANDCRAFTED DOORS & WINDOWS by Amy Zaffarano Rowland; and Old Furniture And Woodwork by Donald Smith.

212 - Four books: Popular Science WOODWORKING PROJECTS Y Four books: Popular Science WOODWORKING PROJECTS YEARBOOK 10th Anniversary Edition; THE COMPLETE GUIDE TO WOODWORKING by Chris Simpson; Mastering Hand Tool Techniques by Alan and Gill Bridgewater; and Restoring, Tuning & Using Classic Hand Tools by Michael Dunbar.

213 - Tool Publications: Plane Talk Newsletters in 3-rin Tool Publications: Plane Talk Newsletters in 3-ring binder; and three notebooks full of type studies out of PTAMPIA VOL 1 & 2.

214 - Three tool publications: Alvin Sellens’ The Stanle Three tool publications: Alvin Sellens’ The Stanley Plane, this is the book that inspired future publications like John Walters books and Patrick Leach’s Blood & Gore, very good; Stanley Rule & Level Co. Catalog No. 102, reprint?, very good; and a Stanley Tools Catalog #34 dated 1949, a few creased in covers, inside very good.

215 - HandE HandLE wrench company helical adjusting nut HandE HandLE wrench company helical adjusting nut wrench, PAT. ?? 20, 1921, complete and fine.

216 - Lot: BEREA Rocky River Oil Stone in original albei Lot: BEREA Rocky River Oil Stone in original albeit tatty box; plus a pair of SIMONDS “RED TANG” FILES box containing a LUTZ file handle with offset rasp or float, very good; and a offset FRENCH rasp with wooden handle, very good.

217 - Cast iron string holder like those found in old ha Cast iron string holder like those found in old hardware stores, has PROPERTY OF THE AMERICAN THREAD COMPANY cast into the base, very good.

218 - Five smaller hammers: DIXON FRANCE; D. MAYDOLE tin Five smaller hammers: DIXON FRANCE; D. MAYDOLE tinner’s; unmarked little claw hammer, two brass hammers, etc. All are very good.

219 - EVANS No. Z100W 100-foot WHITE TAPE, steel tape me EVANS No. Z100W 100-foot WHITE TAPE, steel tape measure, complete and very good.

220 - Two drill indexes: GENERAL HARDWARE MFG. CO. No. 4 Two drill indexes: GENERAL HARDWARE MFG. CO. No. 45, for fractional size drills, very good; and a CLEVELAND TWIST DRILL CO. AthruZ three tiered index for letter drills, very good.

221 - Lot: ebony and brass pad saw; wood handled keyhole Lot: ebony and brass pad saw; wood handled keyhole saw; NICHOLSON rasp with SKROO-ZON wooden handle, very good.

222 - Five smaller ball peen hammers: PLUMB; VLCHEK, and Five smaller ball peen hammers: PLUMB; VLCHEK, and three unmarked ones, all very good.

223 - Two tins: small tin lunch bucket with lid that has Two tins: small tin lunch bucket with lid that has small tear in it, wire handle, very good overall; and a BOY SCOUTS OF AMERICA FIRST AID KIT tin by JOHNSON & JOHNSON, very good.

224 - Six assorted metalworking hammers; HERBRAND 4-oz. Six assorted metalworking hammers; HERBRAND 4-oz. ball peen; one marked MADE IN FRANCE; the others all unmarked, all very good.

225 - NICE C.F. RICHARDSON ATHOL MASS builders level wit NICE C.F. RICHARDSON ATHOL MASS builders level with nickel plated tubes, three telescoping steel legs, complete and very good.

226 - Two boxes of markers: NUPASTEL COLOR STICKS and MI Two boxes of markers: NUPASTEL COLOR STICKS and MILTON BRADLEY’s Tru Tone Broad Line Crayons, the red crayon is broken in 1/2, the others are very good.

227 - Lot: small round brush with wooden handle, very go Lot: small round brush with wooden handle, very good; LEWIS box cutter with folding blade guard; and a WARNER chalk line and reel, very good.

228 - Century of Progress Chicago 1934 World’s Fair elep Century of Progress Chicago 1934 World’s Fair elephant puzzle in original box; plus a set of nine figure stamps, very good.

229 - Lot: two nail sets; P. LOWENTRAUT MFG. rivet set; Lot: two nail sets; P. LOWENTRAUT MFG. rivet set; No. 2 rivet set; and L.S.S. Co. No. 29 marking gage, very good.

230 - Lot: Three ALLSTATE TIRE VALVE CORES from Sears, R Lot: Three ALLSTATE TIRE VALVE CORES from Sears, Roebuck & Co. in original box; adjustable Jet Screw for Ford and Mercury No. A8 in original box; and two machinist layout blocks.

231 - Flat full of NOS hardware and assorted tools: FLUS Flat full of NOS hardware and assorted tools: FLUSH SASH LIFT #319; SASH LIFTS No. 2887P; Stanley #1996 hook blades; bright iron screw eyes; I.P. HYDE leather knife; GREENLEE No. 500 2411.6 3/4-inch round metal punch set; NOS hammer handle, knife sharpener; Stanley #816 back flaps; Stanley 11-921 100 blade dispenser for box cutters; MITEE PENETRATING OIL; etc. Much of which came out of old St. Louis and Chicago hardware stores.

232 - Lot of three wooden JORGENSEN clamps with steel sc Lot of three wooden JORGENSEN clamps with steel screws: pair of 14-inch models and one 12-inch, all are very good.

233 - Flat full of misc. NOS hardware including gross 1 Flat full of misc. NOS hardware including gross 1 1/2 9 round head brass wood screws; 1 1/4 4 flat head bright wood screws; gross 1/2 2 flat head brass wood screws; comb files; Johnson Brothers File box with two files; Collar Brand 1 dozen WARDING 2nd Cut files; 1 dozen half round cabinet files; 5/8 8 Oval Phillips Head Steel Wood Screws; gross 3/4 5 iron nickeled wood screws; and more; much of this came out of old Chicago and St. Louis hardware stores.

234 - Lot: Millers Falls Steel Figures in wooden block, Lot: Millers Falls Steel Figures in wooden block, very good; and a wooden box of machinist clamps?

235 - Lot: UTICA No. 59-9 9-inch HIGH LEVERAGE LINEMAN’S Lot: UTICA No. 59-9 9-inch HIGH LEVERAGE LINEMAN’S PLIER, new condition plier in a tatty original box out of an old hardware store; and a wooden box with adjustable auger bit from STALLBAR BORR REKORD No. 21 14-38mm AKTIEBOLAGET C.I. FALL, ESKILSTUNA, may be missing an attachment.

236 - Stanley #59 dowel jig NIB, fresh out of a St. Loui Stanley #59 dowel jig NIB, fresh out of a St. Louis area hardware store that had been closed for years.

237 - Two sets of open ended auto wrenches: FITZ ALL Wre Two sets of open ended auto wrenches: FITZ ALL Wrench Set (six wrenches) by VLCHEK TOOL CO. Cleveland, very good with original holder; and a NORVILL WRENCH SET (five wrench) DROP FORGED TEMPERED, U.S. PAT. 1808190, both very good.

238 - DIAMOND L59 LONG NOSE DIAMOND-GRIP (Vise Grip) PLE DIAMOND L59 LONG NOSE DIAMOND-GRIP (Vise Grip) PLERERS IOB, pliers are new, box is worn.

239 - PROTO MILLLERS FALLS No. 1150-01 1/4-inch chisels PROTO MILLLERS FALLS No. 1150-01 1/4-inch chisels has two of the original twelve still in the box, box is very good; and a box of four DISSTON SUPER FINE SWISS PATERN files, in very good box. These came out of an old hardware store.

240 - Pair of small saws: CROWN TOOL CO. SHEFFIELD 10-in Pair of small saws: CROWN TOOL CO. SHEFFIELD 10-inch reversible flushing saw, very good; Henry Disston & Sons No. 68 8-inch dovetail saw, small hang hole in handle, very good overall.

241 - Large file box filled with assorted files rasps an Large file box filled with assorted files rasps and one planemaker’s float, DELTA 1/2 round with wooden handle; offset rasp or float with LUTZ file handle; a curved rasp with WARRANTED CAST STEEL on tang; and two smaller files.

242 - Two wooden clamps with steel screws both are very Two wooden clamps with steel screws both are very good.

243 - Nice wooden carpenter’s tool tote with steel handl Nice wooden carpenter’s tool tote with steel handle, box has a smattering of tools inside including keyhole saw, push drills, drafting compass, etc.

244 - Scarce BISBEE made T-auger with nice original hand Scarce BISBEE made T-auger with nice original handle, a very good early New York-made auger with nice deep maker’s mark.

245 - Two harlequin pairs of hollow and round wooden mol Two harlequin pairs of hollow and round wooden molding planes: #4 Ohio #72 hollow and Sandusky Tool #92 round; and BENSEN & CRANNELL #16 round and Ohio Tool #72 hollow.

246 - Stanley #147 5/8-inch match plane, complete and re Stanley #147 5/8-inch match plane, complete and ready to go back to work today.

247 - Sharpening stone in a owner-made 2-piece wooden bo Sharpening stone in a owner-made 2-piece wooden box, a few edge chips, very good overall.

248 - AUBURN TOOL CO. No. 119, 1 1/2-inch moving fillist AUBURN TOOL CO. No. 119, 1 1/2-inch moving fillister with intact nicker and depth stop, very good overall.

249 - Pair of hand saws: Atkins 23 1/2-inch 8ppi panel s Pair of hand saws: Atkins 23 1/2-inch 8ppi panel saw, very good usable condition; and a DISSTON D-23 26-inch that is perhaps best suited for cutting up and making scraper blades.

250 - Veritas low angle jack plane with wooden wear stri Veritas low angle jack plane with wooden wear strip added to fence, comes with a spare A2 blade in original box marked B.U. Jack Rabbet Plane 2 1/4”, 25 (degrees) Square Edge, these retail for $250 or more. The fence on this one can be attached to either side of the plane, the throat is adjustable and so is the tote. This one is complete and fine.

251 - Matched pair of wooden BEWLEY LEEDS English) owner Matched pair of wooden BEWLEY LEEDS English) owner T. WADDINGTON tongue and groove wooden planes, both are fine.

252 - Wooden barn pulley with steel holder; and a nice o Wooden barn pulley with steel holder; and a nice oil can with pump.

253 - Fine 72-inch BOSTITCH plum and level with two hand Fine 72-inch BOSTITCH plum and level with two handle holds rubber ends, all vials intact.

254 - Hirsh The Cutters Edge II All-purpose cutting guid Hirsh The Cutters Edge II All-purpose cutting guide for circular saws, routers, etc. Very good overall.

255 - Ohio Tool Co. 1/2-inch match plane, the bottom of Ohio Tool Co. 1/2-inch match plane, the bottom of the fence had some rot, but the previous owner cleaned it up, stopped the rot and sharpened the blades, it is in good overall condition.

256 - Pair of wooden side bead planes: unknown make 3/8- Pair of wooden side bead planes: unknown make 3/8-inch single boxed with F.HOLMES’ owner maker stamped at least three times into toe and heel, very good; and a T. TURNER SHEFFIELD 1/4-inch with two different owners’ stamps, very good.

257 - VERITAS Edge-Trimming Plane (Left Handed) complete VERITAS Edge-Trimming Plane (Left Handed) complete with owners pamphlet, box that blade came in and sheet describing sharpening of the blade, all inside a fine original box with complete original label.

258 - Pair of boxed side bead planes: 1/4-inch WALLACE M Pair of boxed side bead planes: 1/4-inch WALLACE MONTREAL single boxed, complete and very good; and OHIO TOOL CO. 3/8-inch also marked on toe with S. & J.H. WHITAKER TOLEDO double boxed, very good.

269 - Prelateral Stanley #8 iron jointer plane Prelateral Stanley #8 iron jointer plane, missing the spur from the early-style tote, good low knob, BAILEY PAT chip breaker; very good overall.

270 - Two hand saws Two hand saws: Atkins No. 70 rip with 28-inch 5 1/2ppi blade, handle spur chipped, decent etch on very good blade; and a 22-inch 8ppi panel saw with bottom of handle cracked all the way around at the narrow part, otherwise very good.

271 - Early Stanley? 21 1/4-inch iron jointer plane Early Stanley? 21 1/4-inch iron jointer plane with VICTORY iron, good low knob, good tote; has patent dates in recessed nut, good overall.

272 - Lot: sharpening stone & vise Lot: sharpening stone in wooden box; and a Brink Patent (U.S. No. 1,720,464) bench mounting vise that has bottom portion of mounting bracket broken off. The stone is missing a piece on one side.

273 - Pair of bench planes Pair of bench planes: Stanley #6 iron fore plane with brazed repair at left side near throat, has hard rubber adjuster nut like those used on WWII era planes; nice early-style tote and low knob; and a 21 1/2-inch wooden jointer with closed handle, good OHIO TOOL CO. blade, no markings on wooden body, very good overall.

274 - Pair of oil cans Pair of oil cans: a small one in red paint that has a built-in pump; and a little typewriter oiler PAT. APR 5,

275 - Pair of Yankee ratcheting screwdrivers Pair of Yankee ratcheting screwdrivers: No. 30A that has a flat bit and is in good working order. It has a tag that says This Screwdriver was my Grandfather’s Chas. Sweeney, Bill Baader. Bill Baader was an early president of the Midwest Tool Collectors Association. Also included is an unusual No. 10. It works but it is in rough condition.

285 - Three books: Fine Woodworking Design &c, Three books: Fine Woodworking Design Book Six; Fine Woodworking Techniques; and Fine Furniture for the Amateur Cabinetmaker.

286 - Stanley hardbound book of instructional charts Stanley hardbound book of smaller versions of the instructional charts, inside cover is remnants of a library tag, very good overall.

287 - American Marking Gages by Milton H. Bacheller, Jr. American Marking Gages Patented and Manufactured by Milton H. Bacheller, Jr. Hardbound with intact dust jacket, signed inside by author, this is the THE book if you are researching American marking gages, complete and fine.

288 - Fifty Years A Planemaker And User Fifty Years A Planemaker And User This Being A Master’s Guidance To The Building Of A Wooden Handplane by Cecil E. Pierce, dust jacket has a few small tears, very good overall.

289 - Four woodworking & furniture books Four woodworking & furniture books: FORTY PIECES OF FINE FURNITURE by HERMAN HJORTH 1939, very good; Classic Arts & Crafts Furniture You Can Build by Andy Schultz, very good; In The Craftsman Style Building Furniture Inspired by the Arts & Crafts Tradition by the Editors of Fine Woodworking, fine; and Stickley Brothers by Michael Clark & Jill Thomas-Clark, hardbound with intact dust jacket, very good.

290 - Four woodworking books Four woodworking books: Workbenches from Design & Theory to Construction & Use by Christopher Schwarz, fine; Choosing & Using Hand Tools by Andy Rae, fine; The Shaper Book by Lonnie Bird, very good; and The COMPLETE JAPANESE JOINERY by Hartley & Marks, very good.

291 - Four books: Working Drawings of Colonial Furniture Four books: Working Drawings of Colonial Furniture by Bryant The Manual Arts Press Peoria Illinois 1922, soiled covers, very good inside; Adventures in Wood Finishing by George Frank, 1981 Taunton Press, has plastic cover over the soiled and torn dust jacket, inside very good; HOW TO WORK with TOOLS and WOOD by Stanley Tools Ninth Printing, cover soiled and separating at spine; and Course in Wood Turning by A.S. MILTON and O.K. WOHLERS 1919, some cover wear, inside very good.

292 - Four books: Properties of Engineering Materials &c Four books: Properties of Engineering Materials 1948 edition textbook with owner-added paper dust jacket, inside very good; Engineering Drawing by Thomas E. French 1941 textbook, very good; Essentials of Woodworking by Griffith 1908 by The Manual Arts Press Peoria Illinois; and Antique Furniture Reproduction by Nelson, very good.

293 - Lot of five books Lot of five books: North Brothers “Yankee” Handyman price guide printed in 2000, some small tears in top of dust jacket, book is fine and is signed by author; TOOL STEEL SIMPLIFIED by Frank R. Palmer First Edition 1937 A Handbook of Modern Practice for the Man Who Makes Tools, very good; Machine Woodworking 1937 by Herman Hjorth, very good; Elementary Industrial Electronics by William R. Wellman; and Pattern Making by Ritchy, Monroe, Beese and Hall, 1947, first (blank) page is missing about 1/8 of the page near the top, otherwise very good.

294 - Lot of smaller books Lot of smaller books: Warman’s Tools Field Guide by Clarence Blanchard Values and Identification, 2006; Steel Square Pocket Book by Stoddard, 1946 edition; Steel Square and its Practical Uses by Hodgson, very good; A Handbook on ABRASIVES and GRINDING WHEELS by NORTON ABRASIVES 1946, spiral bound; and five small pocket booklets of By-Laws and Rules and Wage Lists from the 1960-1962 time period.

295 - Pair of drawknives: a pitted cooper or carriage ma Pair of drawknives: a pitted cooper or carriage maker-type drawknife with curved 7-inch blade; good handles; and a 7-inch unmarked model with light surface rust, will clean to very good.

296 - DRILL INDEX marked HUET ST. PAUL with unusual flut DRILL INDEX marked HUET ST. PAUL with unusual fluted bits, very good.

297 - Fine OHIO TOOL CO. 6-inch drawknife. Fine OHIO TOOL CO. 6-inch drawknife.

298 - Pair of push drills/screwdrivers: Reed “Lightning Pair of push drills/screwdrivers: Reed “Lightning Brace” screwdriver with one twist drill bit, very good; and a Yankee No. 55 with light rust on shaft and chuck, good overall.

299 - Lot: tin 16-piece Ratchet Tool Wrench Kit; and sma Lot: tin 16-piece Ratchet Tool Wrench Kit; and small CLEVELAND drill index full of twist drill bits.

300 - Stanley #55 combination plow plane with SW-logo on Stanley #55 combination plow plane with SW-logo on skate, all four main sections, rods, cam, beading stop, depth stops, four early cutter boxes full of cutters, the plane has small chip from side of handle spur, otherwise it is fine; the cutters have some light rust on them but all will clean to fine overall. Comes with a reproduced owner’s manual from Tom Witte. All inside a nice owner-made wooden box that is big enough to hold the plane while assembled along with the blades and other parts.

301 - Pair of 20-inch bench planes: OHIO TOOL transition Pair of 20-inch bench planes: OHIO TOOL transitional fore plane, light rust on exposed surfaces, will clean to very good; and an OHIO TOOL CO. wooden jointer with saw-tooth logo on toe along with former owners’ names, tote spur has been broken and reshaped, light rust on blade, will make good user.

302 - Stanley corner brace with light rust and peeling n Stanley corner brace with light rust and peeling nickel on frame, good wood, will clean to very good usable condition.

303 - Unusual Stanley BAILEY No. 36 wide body transition Unusual Stanley BAILEY No. 36 wide body transitional smooth plane, tote broken and glued, light rust on blade and chipbreaker, will clean to very good overall.

304 - Pair of hand drills including CLAWSON JOIC with he Pair of hand drills including CLAWSON JOIC with head and handles that can be adjusted into several different positions, very good; and a Stanley that needs a light cleaning, very good overall.

305 - Pair of transitional smooth planes: Ohio Tool No. Pair of transitional smooth planes: Ohio Tool No. 035 with spur broken off tote, light rust, has globe logo in left side, will clean to very good; and a Stanley #35 also missing tote spur, light rust to blade and chipbreaker, will clean to very good.

306 - Two Millers Falls 2-speed breast drills with cast Two Millers Falls 2-speed breast drills with cast iron frames: one has D-handle and built in level with good bubble, no broken teeth on gears, intact auxiliary handle, some light rust, will clean to very good; the other has enclosed gear for changing speeds, 3-jaw chuck, one tooth missing and two more chipped on main gear, some rust, will clean to very good overall.

307 - Nice wooden slitting gage with steel roller below Nice wooden slitting gage with steel roller below the handle, and having an adjustable wooden fence, is missing the blade and wedge to secure the blade, can easily be put back into service, very good overall.

308 - Yankee No. 1540 multi speed reversible hand drill, Yankee No. 1540 multi speed reversible hand drill, complete and very good.

309 - Keystone Mfg. ratcheting reversible wrench and dri Keystone Mfg. ratcheting reversible wrench and drill, some rust, will clean to very good.

310 - Massive 17.25-inch jack rabbet plane with 1 7/8-in Massive 17.25-inch jack rabbet plane with 1 7/8-inch blade, nice handle, both nickers intact, some light rust on blade, will clean to very good overall.

311 - FARWELL, OZMUN, KIRK & CO. ST. PAUL, MN Catalog Large FARWELL, OZMUN, KIRK & CO. ST. PAUL, MINNESOTA hardware catalog.

312 - SIMMONS HARDWARE KEEN KUTTER 1918 CATALOG SIMMONS HARDWARE KEEN KUTTER 1918 COMPLETE CATALOG, has lower right corner of the cover missing, inside is very good.

313 - Two San Francisco Hardware Catalogs Two San Francisco Hardware Catalogs: BAXTER, HAMILTON & PACIFIC CO. Catalogue No. 11 SAN FRANCISCO CALIFORNIA since 1853, nice hardbound catalog featuring this firms STLETTO and other branded hardware and tools, very good overall; and a THE A.J. GLESENER COMPANY Machine Shop Equipment, Power Tools, Mill, Mine and Industrial Supplies, since 1909, very good.

314 - SIMMONS YEAR BOOK 1913 KEEN KUTTER CATALOG SIMMONS YEAR BOOK 1913 KEEN KUTTER COMPLETE CATALOG, very good overall.

315 - Mueller spiral screwdriver Decatur, ILL no bits in Mueller spiral screwdriver Decatur, ILL no bits included, very good overall.

316 - Ulmia wooden framed saw Ulmia wooden framed saw with blade that is pitted on one side, the wood is fine, but blade should be replaced.

317 - Nice wooden framed turning saws Nice wooden framed turning saws, was used as recently as 10 years ago by an elderly woodworker in Wisconsin. A well made and very nice saw.

318 - Unusual MEEKER PATENT Lifting-Jack for buggies and Unusual MEEKER PATENT Lifting-Jack for buggies and other vehicles, patented April 26, 1887 by Lorenzo Meeker of Huron, Ohio and assigned to The Huron Block and Novelty Company of the same place, the iron parts have some light pitting, very good overall.

319 - Nice blacksmith made wheelwright’s traveler; and a Nice blacksmith made wheelwright’s traveler; and a K-D LIFTER valve spring compressor PAT APPLD FOR, some mild pitting.

320 - Unusual and perhaps unique wire twisting device wi Unusual and perhaps unique wire twisting device with wooden handles, this is the first of this model we have seen or sold, very interesting and very good.

321 - Three framing squares: aluminum Millers Falls No. Three framing squares: aluminum Millers Falls No. 1402, fine; Stanley No. 100 with sweetheart logo, needs some cleaning, very good; and a NICHOLLS OTTUMWA IA EUREKA STANDARD, fine overall.

322 - Lot: Stanley No. 1245Z No. 2 PADLOCK EYES in origi Lot: Stanley No. 1245Z No. 2 PADLOCK EYES in original box; CRAFTSMAN awl with wooden chalk line reel, very good; unmarked flushing saw; and a Stanley #42 saw set, very good.

323 - Lot: BAGSHAW & FIELD PHILADELPHIA wooden spokeshav Lot: BAGSHAW & FIELD PHILADELPHIA wooden spokeshave, very good; plus three box cutters; SNAP-ON GA169; CRAFTSMAN; & DEFIANCE, all good to very good.

324 - Two wrenches: PLUMB PLUMBALOY 12-inch Crescent-typ Two wrenches: PLUMB PLUMBALOY 12-inch Crescent-type, very good; and an 8-inch COES monkey wrench with wooden handle, complete and fine.

325 - UNION TOOL CO. caliper with 6-inch scale, complete UNION TOOL CO. caliper with 6-inch scale, complete and fine; and a No. 88 ECLIPSE MADE IN ENGLAND bit depth gage that holds auger bit up to 3/4-inch, complete and fine.

326 - Rosewood gunstock scraper with brass wear plate on Rosewood gunstock scraper with brass wear plate on bottom, very good; plus a lignum burnisher or ice club.

327 - ROTARY knife sharpener with wooden handle, very go ROTARY knife sharpener with wooden handle, very good; plus a BROWN & SHARPE No. 770 center punch.

328 - Unusual STODDARD brass caliper with interchangeabl Unusual STODDARD brass caliper with interchangeable legs, currently has curved caliper legs installed but originally came with divider points too, very good.

329 - Lot: small try square with 2 5/8-inch blade; Mille Lot: small try square with 2 5/8-inch blade; Millers Falls No. 69 stubby screwdriver with wooden handle, very good; two machinist jacks, one steel and one in brass; and a small bell.

330 - Three framing squares: HART MFG No. 3, fine; EAGLE Three framing squares: HART MFG No. 3, fine; EAGLE SQUARE needs cleaning, very good; and smaller Stanley No. 18 with 12-inch and 18-inch legs, SW logo, fine.

331 - Keen Kutter scraper, no blade, and ball Stanley ba Keen Kutter scraper, no blade, and ball Stanley ball peen hammer with partial decal remaining on handle.

332 - Pair of fine ratchet braces: DIAMOND EDGE DE412 12 Pair of fine ratchet braces: DIAMOND EDGE DE412 12-inch, very good; and a Millers Falls

333 - Lot of dividers, calipers and other things from to Lot of dividers, calipers and other things from tool & die maker chest: Starrett No. 243 Hermaphrodite; J. STEPHENS A&T CO. Hermaphrodite caliper, very good; two cards of transfer screws one is full ands one is missing two of the twelve screws.

334 - KRAEUTER No. 851 7-inch brake-spring pliers, fine. KRAEUTER No. 851 7-inch brake-spring pliers, fine.

335 - Three tape measures: DISSTON No. 3210 10-foot comp Three tape measures: DISSTON No. 3210 10-foot complete and fine; EVANS POWER TAPE KP12W 12-foot, very good; and a small BARLOW NATIONAL with METRIC EQUIVALENTS chart on back of case, very good.

336 - Pair of rosewood tool handles: Millers Falls & Kee Pair of rosewood tool handles: Millers Falls & Keen Kutter, both full of bits and both are very good.

337 - Three Stanley rosewood handled sliding bevels: 12- Three Stanley rosewood handled sliding bevels: 12-inch, very good; 10-inch very good; and a 8-inch that has light rust on blade.

338 - Macadamizing hammer used to break bigger rocks int Macadamizing hammer used to break bigger rocks into smaller ones to make road beds, very good.

339 - Three rosewood handled sliding bevels: unmarked mo Three rosewood handled sliding bevels: unmarked model with nice brass wing nut, 6-inch blade, fine overall; HENRY DISSTON & SONS 8-inch with nice thumb screw; and a Stanley 6-inch with some light rust on the blade, very good overall.

340 - Granit surface plate 6 x 18 by 2 inches in a custo Granit surface plate 6 x 18 by 2 inches in a custom foam lined 2-piece wooden carrying case with a handle on both ends, fine.

341 - Pair of screwdrivers: flat bladed B.M. CO. MADE IN Pair of screwdrivers: flat bladed B.M. CO. MADE IN USA 18-inch long overall, very good; and a Stanley #2703 with shaft marked No. 2 PHILLIPS PAT 2507231, fine overall.

342 - Four pairs of pliers including Dunlap needle nose; Four pairs of pliers including Dunlap needle nose; UTICA 5-inch side cutters with original box; Swedish needle nose with round jaws; and PEXTO 99-5 plier with side cutter, all very good.

343 - Unusual KRAEUTER wall-mounting wooden point-of-sal Unusual KRAEUTER wall-mounting wooden point-of-sale tool case with hinged door with glass. This was originally mounted with six or more countersunk screws, but has had two wooden batons attached to the back for easier hanging. Has nice brass tags at top and bottom on front, very good overall. The owner-added German phrase on in inside of door translated to “A place for everything, Everything in its place.”

344 - Lot: Diamond Edge saw punch; BELZER dividers; CRES Lot: Diamond Edge saw punch; BELZER dividers; CRESCENT 654 needle nose plier; LINDSTROM side cutter SWEDEN; unknown 5-inch plier with side cutter; all very good.

345 - Lot: P.S.&W. dividers, very good; 4-inch BERG SWED Lot: P.S.&W. dividers, very good; 4-inch BERG SWEDEN end cutters; UTICA 4 1/2-inch needle nose, very good; UTICA 101 cutter; and DIAMOND EDGE 6 1/2-inch needle nose. We have the two original boxes for the Utica pliers and they’ll be included.

346 - Stanley #10 carriage maker’s rabbet plane, very go Stanley #10 carriage maker’s rabbet plane, very good rosewood tote and low knob, light rust on Q-logo blade and on other exposed surfaces, will clean to very good overall.

347 - Unknown make folding handle drawknife, one side ha Unknown make folding handle drawknife, one side has a replacement bolt and one wing broken off the wing nut, good overall.

348 - Stanley #113 Type 3? compass plane with decorative Stanley #113 Type 3? compass plane with decorative cap screw, patent date and Stanley name in front adjuster, has four holes in blade adjuster and intact rear handle, will clean to very good overall.

349 - Unusual Metallic Plane Co. 9-inch smooth plane wit Unusual Metallic Plane Co. 9-inch smooth plane with adjustable throat, has SARGENT & CO. blade installed, tote is broken and needs glue, light to moderate rust to exposed surfaces.

350 - Scarce Chaplin’s Patent transitional fore plane by Scarce Chaplin’s Patent transitional fore plane by Tower & Lyon, tote spur broken off, light rust on nickel plated lever cap, and there’s rust at bottom of unusual chip breaker, will clean to very good overall.

351 - JOHN ELSWORTH GLASGOW 5/8-inch No. 1 fixed sash pl JOHN ELSWORTH GLASGOW 5/8-inch No. 1 fixed sash plane, fine overall.

352 - Two smaller pairs of JORGENSEN wood clamps with st Two smaller pairs of JORGENSEN wood clamps with steel screws: pair of left is 7-inch and pair on right is 8-inch, both pairs are very good.

353 - Flat full of new old stock boxes of hardware inclu Flat full of new old stock boxes of hardware including clout nails (for shoemaking); flat and round headed brass wood screws; two boxes Stanley #840 1-inch hinges; several of the boxes have had one end removed for easy access when they were in the hardware store.

354 - Three Jorgensen wooden clamps with steel screws; 5 Three Jorgensen wooden clamps with steel screws; 5-inch, like new; 6-inch darkened, very good; and 10-inch that has former owner’s name in both sides, very good.

355 - Pair of 10-in. ratchet braces: Stanley #921, very Pair of 10-in. ratchet braces: Stanley #921, very good; and a Craftsman (Millers Falls?) with steel wrist handle, very good; and a leather piece with 11 Allen wrenches, can be mounted by holes on either end.

356 - Two pairs of JORGENSEN wood clamps: two 10-inch mo Two pairs of JORGENSEN wood clamps: two 10-inch models, one is like new; and two 12-inch models, one has former owners name; all have steel screws, all are complete and very good.

357 - Four tool and/or woodworking books Four tool and/or woodworking books: Antique Trader TOOLS PRICE GUIDE by Clarence Blanchard; WOODWORK FOR SECONDARY SCHOOLS by GRIFFITH; BENCH WORK IN WOOD by GOSS; and FILES - How to Select, Use and Conserve Them.

358 - Wilcox Manufacturing Company Aurora IL catalog Original Wilcox Manufacturing Company Aurora Illinois, very good.

359 - Four tool and or tool usage books Four tool and or tool usage books: A.J. Wilkinson Tool Catalog reprint by MWTCA in 2001; Bench Work in Wood by Goss, reprinted by MWTCA in 1997; 101 Metal-Working Projects; and a paper covered How to Cut Screw Threads in the Lathe by the South Bend Lathe Works, very good.

360 - The Stanley Plane The Stanley Plane, this is the plane that all subsequent type studies and research on Stanley planes is based. This one is complete with the dust jacket, very good overall.

361 - Lot of misc. publications Lot of misc. publications: Belcher Bros. Boxwood & Ivory Rules 1860 catalog reprint; Jackson & Tyler Tools And Supplies 1880 catalog reprint; portion of B.B. & W.R. NOYES wholesale hardware catalog 86 Woodward Ave. Detroit, Mich; PLANECRAFT 1974 reprint of a 1959 original which itself was reprinted from 1934; very good; and a DISSTON 1953 How to Choose and Use Tools For Longer Tool Life, very good. Inside cover is a letter from Jacob Disston that begins, “In Peace Waste is SIN, NOW… Waste is a crime.”

362 - Lot of MWTCA catalog and tool pamphlet reprints: t Lot of MWTCA catalog and tool pamphlet reprints: two Jackson & Taylor reprints; D.R. BARTON & CO. reprint; envelop full of tool pamphlet reprints produced by MWTCA in 2002; The Handsaw Catalog Collection; 1904 HENRY CHENEY HAMMER CO. reprint; LUFKIN MEASURING TAPES and RULES reprint; and Exercises in WOOD-WORKING reprint.

363 - Lot of tool publications Lot of tool publications: Craftsman Tools; South Bend How to Run a Drill Press 1951; HUNT’S Catalog No. 16 FOR WOODWORKERS CHICAGO ILLINOIS in original envelope; The Whittler’s X-acto Handbook 1944; SHEET-METAL WORK TREW and BIRD The Manual Arts Press, Peoria Illinois; and A Primer on Grinding Wheel Safety by Norton Abrasives 1941. Six publications in all.

364 - Five tool publications Five tool publications: Amateur Electrician’s Handbook by Collins, ex-library edition; Machine Tool Work Second Edition by Turner and Owen, very good; HOW TO RUN A LATHE by South Bend Lathe Works, paper cover beginning to separate; How to Sharpen booklet by NORTON ABRASIVES; and an original 1920 Universal Tool and Cutter Grinding Machines Norton Company Worcester, Mass.

365 - Nice unused NATIONAL 300-page ledger Nice unused NATIONAL No. 808 300-page hardbound ledger with ruled and numbered pages, fine.

366 - Alvin Sellens’ Woodworking Planes 1978 4th Printin Alvin Sellens’ Woodworking Planes 1978 Fourth Printing, fine with dust jacket; along with Stanley planes in sets Set No. 1 cover only; and a copy of the original owners booklet for a Clausing No. 8520 vertical milling machine.

400 - Significant W.F. & JOHN BARNES VELOCIPEDE scroll s Historically significant W.F. & JOHN BARNES VELOCIPEDE scroll saw that came out of the original LEISTNER METAL WORKS FACTORY in St. Charles Missouri. This saw is complete and in operable condition. It retains most of its original finish, there are one or two bolts that have been replaced. This saw was consigned by the great grandson of Paul G. Leistner. Google Paul G. Leistner and you can read about the wide variety of items this firm made. Here is a chance to own a working tool that Paul G. Leistner and his sons used in their business. (the lot below is also one from the Leistner Family)

401 - Early leather cased Kodak folding camera Early leather cased Kodak folding camera that was purchased by Theodore “Ted” Leistner (son of Paul G. Leistner) that was purchased by Ted when he attended the 1904 Worlds Fair in St. Louis with his father and brothers. As with the above lot, this camera was consigned by Ted’s grandson.

402 - Montgomery Ward combination plow plane IOB Montgomery Ward No. 84-695 combination plow plane (Stanley #45) in original pasteboard box with double row box containing 23 total blades (includes the two in the plane, comes with three main sections, long and short rods, owners booklet, three depth stops and beading stop, there are two or three small spots of rust on the plane itself, the long rods and cam have moderate rust, this will clean to fine overall condition and will make a very good user.

403 - Lot: wooden box with sliding lid containing severa Lot: wooden box with sliding lid containing several small white sharpening stones; a type 150G strop; small NORTON sharpening stone in a tatty pasteboard box; BARLOW advertising tape measure with Wm. H. FATKA PRESIDENT of PRINTING PRESSES SALES AND SERVICE, very good; and a Millers Falls No. 797 offset screwdriver in original box

404 - Later model Stanley #59 dowel jig IOB, this was fo Later model Stanley #59 dowel jig IOB, this was found in a hardware store storage room here in St. Louis Missouri, complete and very good.

405 - Four assorted files and rasps including half round Four assorted files and rasps including half round with LUTZ interchangeable handle, very good; a very thin model; and a round offset rasp that would work well to let smaller barrels into guns.

406 - Lot: Three wrenches; WILLIAMS 13/16 open end; JACO Lot: Three wrenches; WILLIAMS 13/16 open end; JACOBS (Billings?) K420B open end; DURO CHROME 1821 offset 3/8-inch opened ended; a simple leather reamer with red handle; and a stubby flat-bladed screwdriver with yellow plastic handle.

407 - Millers Falls 1224BF hack saw blades new in origin Millers Falls 1224BF hack saw blades new in original box, contains about 41 new 12-inch x 1/2 inch blades in a very good original box.

408 - ATKINS 5110-243-0901 SILVER STREAK hand hack saw b ATKINS 5110-243-0901 SILVER STREAK hand hack saw blades IOB, about 50 blades overall, all are new in a decent original box.

409 - Plastic box with assorted boxes of NOS hardware in Plastic box with assorted boxes of NOS hardware including 1/2 No. 4 flat head brass screws; 1/2-inch CLOUT NAILS (for shoemaking); 6/8-inch CHANNEL NAILS (has swastika-like emblem in label; 1/4-inch round head nickeled screws; Zinc Chromate Plated Steel wood screws 1-inch No 4; etc.

410 - Lot of woodworking magazines including HOME FURNIT Lot of woodworking magazines including HOME FURNITURE; FINE WOODWORKING; WOOD MAGAZINE; MACHINIST; MWTCA Gristmill Magazines, etc.

411 - Two pairs of JORGENSEN wooden clamps with steel sc Two pairs of JORGENSEN wooden clamps with steel screws: 8-inch and 10-inch, one in each pair is fine, and the other in each pair is very good.

412 - Two pair of JORGENSEN wooden clamps with steel scr Two pair of JORGENSEN wooden clamps with steel screws: 10-inch and 12-inch, one in each pair is fine, and the other in each pair is good to very good.

413 - Fine 26-inch Disston D-8 handsaw with fine etch ve Fine 26-inch Disston D-8 handsaw with fine etch very good 10ppi blade, missing four of the five saw nuts, with new nuts, you’ll have a fine saw.

414 - Pair of JORGENSEN wooden clamps; one 16-inch and o Pair of JORGENSEN wooden clamps; one 16-inch and one 18-inch, both very good.

415 - Five assorted boxes of NOS files: a full dozen JOH Five assorted boxes of NOS files: a full dozen JOHNSON BROTHERS FILE CO. 8-inch flat floats, all very good. NICHOLSON No. 40494 with one file left in box; HELLER BROS. Silversmith’s Rifflers with one remaining; HELLER BROS. Silversmiths’ Rifflers 7 1/2-inch with three remaining; and HELLER BROS 8 x 1/4-inch Parallel Machine Pillar with nine files remaining.

416 - Box of assorted NOS files and rasps. Box of assorted NOS files and rasps.

417 - Six boxes of files: HELLER NUCUT Files box of 1 do Six boxes of files: HELLER NUCUT Files box of 1 dozen 6-inch half found 2nd cut files, full box; SIMONDS RED TANG Double Ex Slim Taper with assorted new and used files inside, box worn; American File Works extra slim taper 5-inch with one file inside; HENRY DISSTON H.K. PORTER 4-inch round bastard with three remaining; NICHOLSON 4-inch round with four remaining; and BARRETTE No. 0 3-inch with seven remaining.

418 - Lot: two pair of dividers on pat. JULY 23, 1912; o Lot: two pair of dividers on pat. JULY 23, 1912; outside spring clipper; burnisher, saw frame; file with wooden handle, and Stanley screwdriver with interchangeable bits.

419 - Lot: QUICKWAY simple socket wrench set in tin box; Lot: QUICKWAY simple socket wrench set in tin box; guide holder for Stanley #59 dowel jig; depth stop for auger bit; saw file holder; two file cards; and a Red Devil Li’L Jimmy pry bar and scraper; and a FLEXCLAP holder for center punches, nail sets, currently holding four tools.

420 - Six tape measures including a L.S. Starrett 505B 2 Six tape measures including a L.S. Starrett 505B 25-foot; Veritas 6-foot tape; Evans Power KEY CADDY with key ring; CRAFTSMAN BLACK & WHITE; EAGLE RULE 12-foot steel tape; and EVANS No. 106W 6-foot; all very good; plus a VLCHEK 6-inch CLICK STOP Crescent-type wrench, like new.

421 - Unusual and early blacksmith made pair of shears w Unusual and early blacksmith made pair of shears with on blade twisted and riveted pivot, first we’ve seen of this type.

422 - Drafting set and a C.D.I. Chicago indicator No. 2- Drafting set and a C.D.I. Chicago indicator No. 2-B50-250.

423 - Unusual Cigar box bull of new old stock lock sets Unusual Cigar box bull of new old stock lock sets with keys for tool chests etc. has a lock mounted to the outside of the DUTCHMASTER cigar box to show what they look like.

424 - Set of six steel parts bins, a few holding steel w Set of six steel parts bins, a few holding steel wool.

425 - Lot of empty file boxes; Millers Falls micrometer; Lot of empty file boxes; Millers Falls micrometer; B&S end mill in a box; six Swiss files in a plastic pouch; and three UTICA plier boxes that belong with the pliers in lots 342 and 345.

426 - Lot: two wooden mallets; traditional jointers mall Lot: two wooden mallets; traditional jointers mallet; round headed mallet and a unusual brush.

427 - Three Stanley hardware boxes including 4 1/2-inch Three Stanley hardware boxes including 4 1/2-inch wrought steel safety hasp in tatty SW box; one pair 3 1/2 x 3 1/2 butts (hinges); and a box and screws for 4 1/2 x 4 1/2 butts (hinges).

428 - Eklind T-Handle Hex Keys in original folded steel Eklind T-Handle Hex Keys in original folded steel holder with Key Fit Table on front, very good.

429 - Four early Audel books Four early Audel books, they all have the gold page edges, all are very good.

430 - Two books Two books: A Book of Toasts by Minna Thomas Antrim; and UNION TOOL COMPANY MACHINISTS HANDBOOK OF TOOLS and TABLES.

431 - Three books Three books: WOOD Technology and Processes by John L. Feirer 1994, very good; General Woodworking by Johnson and Newkirk, 1946, scuffed hard covers, inside very good; and DANISH CHAIRS by Noritsugu Oda, complete and fine.

432 - Four books Four books: Principles of Woodworking by Herman Hjorth copyright 1930 Fourth Edition, very good; PLANECRAFT Hand Planing by Modern Methods Copyright 1953 Revised & Enlarged; Sheet Metal Shop Practice by Leroy F. Bruce, 9th Printing 1964, very good; and a Mechanical Drawing by French and Svensen, copyright 1940 with covers separating from book and cover coming off spine, inside has a number of creased pages and others that had been written on.

433 - Three Arts & Crafts furniture books Three Arts & Crafts furniture books: IN THE ARTS & CRAFTS STYLE by Barbara Mayer, dust jacket scuffed and has a few small tears, books is fine; ARTS & CRAFTS FURNITURE CLASSIC TO CONTEMPORARY by Kevin P. Rodel and Jonathan Binzen, fine book and dust jacket; and Mission Furniture From the American Arts & Crafts Movement With Values by Paul Royka, piece of dust jacket missing, book is fine.

434 - THE TOOLBANK COLLECTION HISTORIC TOOLS THE TOOLBANK COLLECTION HISTORIC TOOLS hardbound book copyright 1998, complete and fine with dust jacket.

435 - Two tool books Two tool books: CLASSIC HAND TOOLS by Hack; TOOLS Rare and Ingenious by Nagyszalanczy, both books are complete and fine.

436 - Three furniture or woodworking books Three furniture or woodworking books: Projects For Woodworkers 75 Project Plans for Furniture, Toys, and Accessories Volume I by The Editors of Fine Working, scuffed edges on dust jacket, book is fine; Taunton’s COMPLETE ILLUSTRATED Guide to Period Furniture Details by Lonnie Bird, fine; and Tage Frid Teaches Woodworking Joinery: Tools and Techniques A Fine Woodworking Book, soiled and scuffed dust jacket, book is fine.

437 - Three books Three books: HAND TOOLS OF ARTS AND CRAFTS the encyclopedia of the fine, decorative and applied arts by the Diagram Group, fine; A CABINETMAKER’S NOTEBOOK by JAMES KRENOV dust jacket has tear at top, book is fine; and THE FINE ART of CABINETMAKING by JAMES KRENOV, torn dust jacket, fine book.

438 - Five tool catalogs and catalog reprints Five tool catalogs and catalog reprints: Henry Disston January 1st 1876 price list reprinted by Roger K. Smith in 1994, very good; NATIONAL SAW COMPANY 1895 catalog reprinted by MWTCA in 2006; RAYL’S DETROIT MICHIGAN WOOD-WORKERS’ TOOLS Catalog No. 21 reprinted by Roger K. Smith in 1976; SARGENT PLANES IDENTIFICATION and VALUE GUIDE by David E. Heckel, 1997; and a STANDARD TOOL CO. Mechanics’ Fine Tools pocket catalog reprinted by Martin J. Donnelly, very good.

439 - Three early and original saw catalogs Three early and original saw catalogs: 1914 Henry Disston & Sons hardbound 238-pages, very good; Henry Disston & Sons paper covered JANUARY 1918 catalog, has piece of cover and first 5 pages missing, all other pages are complete and very good; and a 1914 paper covered Atkins & Co. Inc. Saws and Saw Tools, extensive catalog, very good.

440 - Two original catalogs Two original catalogs: EAGLE OIL AND SUPPLY CO. BOSTON MASS, Oil, Mill Supplies & Engineering Specialties 1919 catalog, hardbound, very good; MONTGOMERY & CO. NEW YORK TOOL CATALOG No. 21, very good.

441 - STANLEY TOOLS 1953 & 2 Disston catalogs STANLEY TOOLS 1953 Edition Catalog 34, very good; and two Disston paper covered catalogs: 1936 DISSTON SAW, TOOL AND FILE MANUAL, very good; and a 1942 DISSTON SAW, TOOL AND FILE MANUAL from the CASS LAKE HARDWARE in CASS LAKE MINN, soiled cover with moderate wear.

442 - Three STARRETT TOOLS catalogs Three STARRETT TOOLS catalogs: REVISED EDITION CATALOG No. 25 dated 1935, complete and very good; unknown year partial catalog; and a REVISED EDITION CATALOG NO. 25 dated 1935, soiled covers, very good overall.

443 - Two original tool catalogs Two original tool catalogs: O.S. RIXFORD’S SCYTHES AND AXES circa 1877 paper covered catalog, creased cover, very good overall; and CATALOG No. 10 from BERGER BROS. COMPANY of PHILADELPHIA filled with tinner's and roofers’ supplies, very good.

444 - Three machinist tool catalogs Three machinist tool catalogs: Starrett Catalogue No. 17 with soiled covers, inside very good; Starrett Catalog No. 23 copyrighted 1924; worn covers, inside OK; and a hard covered BROWN & SHARPE Catalog No. 33, dated 1938, very good.

445 - Three original tool catalogs Three original tool catalogs: Disston 1906 POCKET EDITION PRICE LIST, worn covers, inside very good; E.C. ATKINS & CO. 1894 SAWS AND SAW TOOLS, covers worn and a few inside pages have doodling, good overall; and an ATKINS BORG-WARNER HANDSAW MANUAL, very good.

447 - Misc. tool catalogs and tool club magazines Misc. tool catalogs and tool club magazines including SWTCA Newsletters; THCKK CHRONICLES; OLD TOOL NUT JOURNALS; Tony Murland catalogue; The Tool Chest newsletter from Australia; Tool Ads; and many more.

448 - Original ABRASIVE PRODUCTS THE CARBORUNDUM COMPANY Original ABRASIVE PRODUCTS THE CARBORUNDUM COMPANY Catalog No. 102 Aug. 1936, complete and very good; and a reprint of an A.J. WILKINSON & COS. circa 1867 catalog reprinted by MWTCA in 2001, fine.

450 - J.H. Hall NASHVILLE, TENN Hardware catalog ca. 189 J.H. Hall NASHVILLE, TENN Wholesale Hardware catalog circa 1893. This catalog came from the Hunter Pilkinton Collection, it is filled with carpenter tools, kitchen items, implements, blacksmith anvils, guns, and lots more. The leather covering the spine is missing in a few spots and peeling in others, the inside is very good. The company burned down in 1913.

451 - Lot: Exacto carving knife; two putty knives; offset ratcheting Phillips head screwdriver; Stanley #669 offset flat-bladed screwdriver; small typewriter-type oiler with long spout perhaps for pianos; small paper punch in military green paint; two molders tools; small plow plane blade; allen wrenches; and feeler gauges. A total of 13 items.

452 - Three long handled scrapers by DIKEMAN; STARRETT & HIBBARD, all have some light rust.

453 - Nice medium sized shingle froe.

454 - Lot of 12 assorted screwdrivers one with screw holder.

455 - Lot: hand drill; Stanley clapboard siding marker; hollow auger; 1/4-inch socket driver; offset flat-bladed screwdriver; Stanley edge rounding tool; Yankee-type push drill; cabinet screwdriver from Sheffield, very good. Nine items total.

456 - Lot: WISS tin snips; side cutting nipers; linemans’ type plier with side cutter and rubber insulated handles; wire stripper; and a small pair of STAHL nippers. Some light rust, but all will clean to very good.

457 - Four long handled scrapers: BENNETT MFG; Pratt Mfg; Stanley #282; and Starrett, all have light rust and need a cleaning.

458 - Lot: Hole Saw Set in original plastic case; three pliers; needle nose pliers; side cutters, two envelopes: one with a few Dremel Tool bits; and one with some small abrasive blades for a small saw.

459 - Pair of jack planes: Union Trask-Patent transitional, tote spur is chipped, has adjuster lever but never had a “vertical post” has light to moderate rust, will clean to at least good overall condition; and a Stanley #5 iron jack, with hard rubber adjuster nut and stained hardwood tote and knob that were used on WWII era planes, has light rust, will clean to fine condition.

461 - Lot: tin snips; Prest-o-Lite torch head; Vise-Grip plier; English-type saw wrest; and a slip-joint Champion plier.

463 - Lot of 13 assorted screwdrivers including Handyman 2H ratcheting model.

465 - Three saws: Atkins back saw; Blue Brand Snap-On) hack saw; and

467 - Lot: two keyhole saws; small hatchet with steel head; and a leather knife.

469 - Eight assorted saws and saw frames.

521 - Circa 1951 Woodbury & Company Catalog Circa 1951 Woodbury & Company Industrial Supplies, Heavy Hardware, Steel Catalog F, Portland, Eugene, Medford, Coos Bay, hard covered, very good.

527 - H.G. LIPSCOMB & CO. NASHVILLE, TENN.1913 Hardware H.G. LIPSCOMB & CO. NASHVILLE, TENN.1913 Hardware Catalog, complete and very good. This is the first catalog we have sold by this firm, and we cannot recall ever seeing another.

528 - Pair of hardware catalogs Pair of hardware catalogs: BARKER-CHADSEY CO. PROVIDENCE, R.I. Spring and Summer 1953 CATALOG, spiral bound, very good; and a W.S. NOTT CO. MINNEAPOLIS GENERAL CATALOG No. A6 featuring belting, leather tools, flu cleaners, oilers, pulleys, safety valves, batteries, bulbs, and other industrial supplies, book has moisture damage and hard covers are separating, inside is very good.

529 - CLARK & BARLOW HARDWARE CO. CHICAGO 1953 CLARK & BARLOW HARDWARE CO. CHICAGO 1953 hard covered hardware catalog, complete and fine.

530 - Pair of original Disston & Sons catalogs Pair of original Disston & Sons catalogs: hard covered July 1906 catalog, filled with the most extensive selection of hand saws, saw vises, files, bevels, squares, files, etc. Cover is moisture stained, inside is fine; plus 1914 paper covered catalog that has come apart in the center and the 20 or so middle pages are loose, some of the loose pages have staining and creases at the sides and corners, complete and just needing to be re-bound.

531 - Lot: two NOS electric motor adjusting rails for se Lot: two NOS electric motor adjusting rails for setting up bench arbors, drill presses, etc.; empty NORTON Abrasives box; zip lock bag full of washers for vise handles; plastic bag of NOS hardware; green velvet bag; pair of small gate hinges; scissors; 3/4-inch wood bit; three assorted twist drills; MASTER BROWNIE tape measure; antique nail clipper; Craftsman 3/8 x 7/16 wrench; E.T. LIPPERTS SAW CO. pin; and a jewelers type screwdriver.

532 - Lot: Keyhole saw blade; broken Stanley jointer gag Lot: Keyhole saw blade; broken Stanley jointer gage for bench planes; watchmakers caliper; protractor; hack saw handle, drafting rule; and two French curves new in original packaging.

533 - Lot: 36 assorted nail sets, and center punches; on Lot: 36 assorted nail sets, and center punches; one Forstner bit, two square sheet metal punches; and a wooden handle with burnishers or something on one end, marked EVERHOT MAYWOOD ILL on top of handle.

534 - Lot: brass surveyor’s plumb bob; chisels, punches Lot: brass surveyor’s plumb bob; chisels, punches and a Perfect Handle type screwdriver with broken tip.

535 - Lot: two ball peen hammers, one marked BILLINGS; t Lot: two ball peen hammers, one marked BILLINGS; two fish filleting knives; a boxwood head for a Stanley marking gage; and four file boxes.

536 - Pair of MARPLES M146 hold downs for workbenches, b Pair of MARPLES M146 hold downs for workbenches, both like new; plus a round mallet and a small notepad and case.

537 - Lot: coping saw; bit brace; fencing plier with sta Lot: coping saw; bit brace; fencing plier with staple hook; keyhole saw; unusual hack saw, eight files and a star drill.

538 - Three wooden molding planes ABERDEEN sash?, complete and very good; VARVILL & SON YORK sash, very good; MACKAY, BURLEY & KEYS GLASGOW right snipes bill, nice boxwood boxing complete and very good.

539 - D.R. Barton 6/8" quarter round molding plane Nice D.R. Barton 6/8-inch quarter round molding plane, complete and fine.

540 - Unusual paving hammer with 17" head Unusual paving hammer with 17-inch head, rusty and pitted.

541 - Rusty blacksmith’s double caliper Rusty blacksmith’s double caliper.

542 - Bricklayers’ double-ended scutch hammer Bricklayers’ double-ended scutch hammer, some rust, will clean to very good.

543 - Early I MORRISON 30" single iron wooden jointer Early I MORRISON 30-inch single iron wooden jointer plane with offset tote, W. BUTCHER blade, very good overall.

544 - Stanley corner brace Stanley corner brace with several patches of rust and some peeling nickel, will clean to very good usable condition.

545 - Luther Grinder hand cranked grinder with tool rest Luther Grinder hand cranked grinder with tool rest, missing the stone, very good overall.

546 - Lot of 50 blades for a Stanley #55 combination plo Lot of 50 blades for a Stanley #55 combination plow plane, several are very crusty, they were picked up off a concrete basement floor where they had laid for many years. Comes with three wooden box, one has a lid, and one has a partial label, many of these can be returned to service with a light cleaning.

547 - Two iron spokeshaves Two iron spokeshaves: one with loop blade clamp, looks like a Birmingham, some rust; and a Stanley #60 double shave with some rust, RULE & LEVEL CO. blades, will clean to very good.

548 - Lot of nine assorted chisels and gouges all with s Lot of nine assorted chisels and gouges all with some rust.

549 - Pair of Stanley #66 hand beaders including a Type Pair of Stanley #66 hand beaders including a Type I model with both fences, no blades included.

550 - Rusty 13-inch infilled panel plane with captive gu Rusty 13-inch infilled panel plane with captive gunmetal or bronze lever cap, HEARNSHAW BROS JOHN BULL blade, closed handle, the stuffing is secured with screws in the side of the body, appears to be a kit plane, has considerable rust that will require cleaning, will make a good user.

551 - Pair of empty fire extinguishers. Pair of empty fire extinguishers.

552 - Pair of blacksmith tools used for curling hot stee Pair of blacksmith tools used for curling hot steel.

553 - Pair of empty fire extinguishers Pair of empty fire extinguishers

554 - Emerson Type 73646 AK 3-speed electric fan with gu Emerson Type 73646 AK 3-speed electric fan with guard, very good.

555 - Walker Turner table saw parts: frame, table, arbor Walker Turner table saw parts: frame, table, arbor, GE motor with belt pulley, arbor, and nuts and bolts. The frame and table top are in newer green paint.

556 - Lot: scale parts for a countertop platform scale i Lot: scale parts for a countertop platform scale including base, brass beam and pivot; plus two cast aluminum scoops and a dust pan made of tin and wood.

557 - Three brass door/gate latches measuring 18 x 1 1/4 Three brass door/gate latches measuring 18 x 1 1/4, all three are new old stock.

558 - Lot: Cheney 16-oz claw hammer, very good; coping s Lot: Cheney 16-oz claw hammer, very good; coping saw, needs light cleaning; small Dietzgen No. 4209 8-inch horsehair brush and small tin dust pan.

559 - Lot: Three boxes of Channel Nails (shoemaking?) an Lot: Three boxes of Channel Nails (shoemaking?) and a box of Stanley SW No. 1 padlock eyes, new in box, box top has come off; and a Stanley #59 dowel jig IOB appears to be complete in original box with instructions, fine.

560 - Nice set of 10 auger bits in a nice canvas roll. Nice set of 10 auger bits in a nice canvas roll.

561 - Lot: Two magnetic MAGSWITCH guides for table saw; Lot: Two magnetic MAGSWITCH guides for table saw; bundle of NOS SIMONDS 10-inch 24-tooth hack saw blades; S-wrench; set of two NOS DELTA No. 22-562 portable planer knives; guide for Stanley miter box with clamp; and a saw guide PAT MAR 23, ’98.

562 - Nice PEARCE CO. cast iron bottle corner or capper, very good overall.

563 - Small plastic railroad signal light plastic) with blue lens; plus a small copper plant mister.

564 - Stanley #90 cabinetmakers bullnose rabbet plane, s Stanley #90 cabinetmakers bullnose rabbet plane, some light rust, will clean to very good.

565 - Stanley #130 double ended iron block plane, some l Stanley #130 double ended iron block plane, some light rust, will clean to very good.

566 - Pair of 12 x 14 shelf brackets in blade paint, ver Pair of 12 x 14 shelf brackets in blade paint, very good.

567 - Pair of cast iron adjustable saw vises including D Pair of cast iron adjustable saw vises including Disston No. 1 both complete and very good.

568 - Lot: Steel bench screw; DELTA AUTO SET MITER GAGE Lot: Steel bench screw; DELTA AUTO SET MITER GAGE for table for machines; cast iron adjustable saw vise, very good. and a Cincinnati Tool Co. C-clamp, very good.

569 - Eight T.H. WITHERBY wooden chisel boxes seven with Eight T.H. WITHERBY wooden chisel boxes seven with sliding lids; plus another wooden box with sliding lid.

570 - Lot of assorted nippers, knife blade, Stanley chis Lot of assorted nippers, knife blade, Stanley chisel (no handle); pliers, star drill, 9-inch Auto Wrench, Millers Falls No. 77A drill, small steel square, etc. Total of 18 items.

571 - Lufkin No. 7127 45-inch rule with brass ends, very Lufkin No. 7127 45-inch rule with brass ends, very good overall.

572 - Smaller Cincinnati Tool Co. Hargrave quick-adjusti Smaller Cincinnati Tool Co. Hargrave quick-adjusting bar clamp, very good.

573 - Lot: Crescent wrench; two pair of pliers; pair of Lot: Crescent wrench; two pair of pliers; pair of side cutters; and knife edge file all need cleaning. Six items in all.

574 - Lot: PRATT & CO. BUFFALO moving fillister plane wi Lot: PRATT & CO. BUFFALO moving fillister plane with screw operated depth stop, cracked wedge; Craftsman wrench; two plane blades, two chip breakers; a cast iron trivet; file; rosewood bottom for Stanley #81 scraper; Pexto rivet set; rosewood? wedge; and an unknown brass item. Total of 12 items.

575 - Lot: bench mounted grinder; electric drill &c. Lot: bench mounted grinder; electric 3/8-inch drill; Millers Falls hand drill; needle nosed pliers; open ended wrench; simple hex socket set; plier; chisel; air gaga; bevel edged drafting rule IOB; lasting plier; etc.

631 - Two sections of line shaft with pulleys, both are Two sections of line shaft with pulleys, both are very good.

632 - Heavy duty bench arbor with grinding stones curren Heavy duty bench arbor with grinding stones currently installed, oil fittings, intact tool rests, and comes with an electric motor, all comes with wooden box.

633 - Lot of cistern pump parts: good main body, base, top and pump handle, needs bolts and plunger and maybe a few other small bits to complete.

634 - Pair of rough sickle bar grinders: one is marked INTERNATIONAL CHICAGO U.S.A.; the other is unmarked. Both come in a full-sized steel chafing dish.

635 - Long bladed hay or cane knife; and two crosscut saw handles with mounting hardware.

636 - Three fireplace shovels.

637 - Unknown-make broad axe blade that needs a good cleaning and re-hafting.

638 - Cross peen hand sledge hammer; and a short handled adz.

639 - Two screw-adjusting Stillson-type pipe wrenches: 24-inch J.P. DANIELSON Co. very good; and unknown make 14-inch with light rust, very good overall.

640 - Lot of four hammers: cobblers; automotive with tire tool; ball peen and one that looks like a blacksmith hammer for cutting hot work.

641 - Pair of rusty iron bench planes: Stanley #6 that i Pair of rusty iron bench planes: Stanley #6 that is caked in moderate to heavy rust from sitting in a damp basement, and a SIEGLEY 21 1/2-inch #7C missing tote and knob, good blade and lever cap, just add wood and off you’ll go.

642 - Pair of 26-inch transitional jointer planes: Stanl Pair of 26-inch transitional jointer planes: Stanley #32 prelateral with eagle logo and model number on toe, very good overall; and a “Liberty Bell” #132 missing tote, good low knob, good blade with original piece to attach blade to adjuster, good overall.

643 - Lot: leather punch; crate opening tool; chisel &c. Lot: leather punch; crate opening tool; pitted chisel with abused socket; pressed steel combination wrench with spanner and screwdriver; caliper; malleable 7/8-in. hex box ; and malleable spanner marked LESLIE PRESS’R REGULATOR one side and 146 on other side. Nine items in all.

644 - Lot: three adjustable auto wrenches Lot: three adjustable auto wrenches; L. Coes 12-inch all-steel monkey wrench with light rust; and a nice 14-inch S-handle Crescent type.

645 - Lot: Blacksmith type hammer; pipe cutter &c. Lot: Blacksmith type hammer; BARNES NO. 2 pipe cutter; patented (U.S. No. 1,424,069) SNAP-ON box end wrench; and a 14-inch Genuine Stillson pipe wrench.

646 - Lot: 9" auto wrench & 2 pair of nippers Lot: 9-inch auto wrench; and two pair of nippers; the larger 14-inch pair is marked BRIDGE TOOL CO. ST LOUIS, MO.

647 - Vintage railroad signal & a hanging pan for a scal Vintage railroad signal with square steel shaft; and a hanging pan for a scale, with chains, will clean to very good.

648 - Medium sized steelyard scale Medium sized steelyard scale, needs a weight, very good overall.

649 - Four assorted scoops & 3 wooden taps for barrels Four assorted scoops, two are nice aluminum models like those used in ice machines; plus three wooden taps for barrels.

650 - Lot: steel bucket, pipe flaring tool, 3 taps, &c. Lot: steel bucket used with grain scales filled with scale weighs, pipe flaring tool, three wooden barrel taps, etc. A total of 13 items.




Auctioneer License Information:

    Auction Listings provided by AuctionZip.com. Although the information published herein is from sources deemed reliable, AuctionZip.com expressly disclaims any liability for errors, omissions or changes regarding any information provided for this auction. Potential buyers are urged to verify auction date, time, and content directly through the auctioneer's website or by contacting the auctioneer directly. The terms and conditions of the auction may or may not be published in this listing. ALL TERMS AND CONDITIONS AND OTHER ANNOUNCEMENTS MADE THE DAY OF THE AUCTION ARE BINDING AND TAKE PRECEDENCE OVER ANY INFORMATION FOUND HEREIN.