CLOSE
( E-Mail, User ID, or Auctioneer ID )
(Uncheck if using a shared computer)
 
 
 
 

Auctions in your inbox!

Get notified about the latest local and online auctions.

We value your privacy! Click here to read our policies.



Auction Information
Auctioneer Hoff Online Auctions 612-521-5500
Auction Date Nov 16 Auction
Location
9000 Science Center Drive
Suite B
New Hope, MN
Time 10:00AM
Auctioneer's Other ListingsE-mail AuctioneerAuctioneer's Web Site
View Full Photo Gallery
Auction Listing
AuctionZip Auctioneer ID# 12440
1.Double Length Acorn Type Welding Table on Metal Table Base. (2) 60" x 60" x 6" Top Plates with 1-5/8" Knockouts, 122" x 62" x 28-1/2" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

2.Ransome Type Powered Turning Roll Welding Positioner. (1) Drive Fixture and (2) Idler Fixtures. 10" dia. X 3" Rubber Wheels, 12" Between Inner Wheel Centers, 43" Between Outer Wheel Centers, Seco Bronco II Controller, Adjustable Leg Height, 1/2 hp, 1-Phase, Approx. 58" x 36" x 40" Each Unit.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

3.Ransome Size No. 25P Welding Positioner. 2500 lb Rated Capacity, 42" Dia. Table, .030-1.2 Table RPM Range, Foot Pedal, 440 volt, 3-Phase, s/n: 165852, Approx. 44" x 72" x 62" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

4.Group of Assorted Acorn Type Hold Downs.
5.Pallet of Assorted Fasteners, Threaded Studs and Assorted Parts.
6.Airco Model 4DDR-24-B Miget DC Welder. 40 Volts, 400 Amps @ 60% Duty Cycle, 70 Max OCV, Foot Pedal, 230/460 Volt, 3-Phase, s/n: R369895, Approx. 24" x 40" x 54" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

7.Group of 1-1/4" Dia. X 10-1/2" Threaded Studs.
8.Ransome Size No. MIRR Pipe Roll Welding Positioner Idler Unit. 16" x 5" Wheel Size, Approx. 54" Max Between Centers, 72" x 10"x 18" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

9.60" x 60" x 5-1/2" Acorn Type Welding Table, 1-3/4" Knockouts, 62" x 62" x 30" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

10.(8) Assorted Acorn Type Hold Downs.
11.Group of 7/8" x 5-3/4" Threaded Stud with Nuts.
12.Phoenix Dry Rod Model 12 Type 300 Electrode Stablilizing Oven. 18" dia. X 20" Chamber Dimensions, 100-500 Degree Temperature Range, 1000 Watts, 120 volt, 24" x 30" x 52" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

13.(7) Lengths of Approx. 1" Dia. Threaded Studs. Lengths up to 30".
14.Aronson Model AIL-9 Powered Pipe Roll Welding Positioner. (1) Drive Unit, 11-1/2" x 4" Wheels, Approx. 62" Max Between Wheel Centers, Foot Switch, 230 volt, 101" x 28" x 28" Overall and (1) Idler Unit, 11-1/2" x 4" Wheels, 62" Max Between Wheel Centers, 84" x 24" x 19" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

15.Airco Model PA-3A 300 Amp DC Pulsed Arc Welding Machine. 30 Volts, 300 Amps @ 100% Duty Cycle. 48 Max OCV, 80 Max Pulse Peak Volts, 20 KVA @ 50% Pulse Width, Cart Mounted, 208/230/460 volt, 3-Phase, s/n: HJ167722, Approx. 20" x 48" x 42" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

16.Group of 1-1/2" dia. X 11-5/8" Threaded Studs.
17.Assorted Tools Including: Chain Wrench, Hammer Model C9 Threading Head, Die Handle.
18.(2) 60" x 60" x 6" Acorn Type Welding table Tops. 1-5/8" Knockouts.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

19.Ransome Type Powered Turning Roll Welding Positioner. (1) Drive Fixture, (3) Idler Fixtures, 19" Diameter x 8" Wide Rubber Wheels, Approx. 56" Max Between Wheel Centers, 2 hp Drive Motor, Foot Pedal, 230/460 Volt, 3-Phase, Approx. 172" x 45" x 27" (Drive Unit) and 100" x 34" x 27" (Idler Units)

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

20.M.K. Products Inc. Model 150-003 Cobramatic Wire Feeder, 115 volt, s/n: 35412.
21.60" x 60" x 6" Acorn Type Welding Table. Approx. 1-3/4" Knockouts.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

22.Group of Approx. 8" L x 1" Threaded Studs.
23.Group of Approx. 10-1/2" L x 1-1/4" Threaded Studs.
24.Miller Model SR-300-32 DC Arc Welder. 40 Volts, 300 Amps @ 60% Duty Cycle, 70 Max OCV, 23.2 KVA, 230/460 volt, 3-Phase, s/n: W532348, Approx. 23" x 35" x 45" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

25.Phoenix Dry Rod Model 12 Type 300 Electrode Stablilizing Oven. 18" dia. X 20" Chamber Dimensions, 100-500 Degree Temperature Range, 1000 Watts, 120 volt, 24" x 30" x 52" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigg

26.Ransome Model MPRR Powered Turning Roll Welding Positioner Drive Unit. 16" x 5" Wheels, 42-1/2" Max Between Wheel Centers as Shown, Approx. 53-1/2" max Between Wheel Centers, 6.3-63 Inches per Minute Wheel Surface Speed, s/n: 343300, Approx. 100" x 26" x 2" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

27.(2) 60" x 60" x 6" Acorn Type Welding table Tops. 1-5/8" Knockouts.
28.Group of Approx. 12" L x 1-1/2" Threaded Studs.
29.Group of Approx. 12" L x 1-1/2" Threaded Studs.
30.Phoenix Dry Rod Model 16 Type 800 Electrode Stabilizing Oven. 18" Dia. x 20" D Chamber Size, 100-550 Degree Temerature Range, 1000 Watts, 120 Volt, 24" x 28" x 50".

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

31.Group of Approx. 9" L x 1-1/8" Threaded Studs.
32.Phoenix Dry Rod Model 12 Type 300 Electrode Stablilizing Oven. 18" dia. X 20" Chamber Dimensions, 100-500 Degree Temperature Range, 1000 Watts, 120 volt, 24" x 30" x 52" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigg

33.Airco Model PA-3A 300 Amp DC Pulsed Arc Welding Machine. 30 Volts, 300 Amps @ 100% Duty Cycle. 48 Max OCV, 80 Max Pulse Peak Volts, 20 KVA @ 50% Pulse Width, Cart Mounted, 208/230/460 volt, 3-Phase, s/n: JA419921, Approx. 20" x 48" x 42" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

34.Donaldson Torit Model NA Fume Collector, Cartridge Type, Approx. 12' Snorkel, 1.5 hp, 3450 rpm, 120 Volt, s/n: IG326591, Approx. 50" x 50" x 116" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

35.M.K. Products Inc. Model MK-3A Cobramatic Wire Feeder. s/n: 20565-82.
36.Electrode Stabilizing Oven Station Consisting of: (3) Phoenix Dry Rod Ovens. (1) Model 7, Type 900, 100-550 Degree Temperature Range, 2400 Watts, 240/440 Volt, 3-Phase, (2) Model 9, Type 900, 100-550 Degree Temperature Range, 2400 Watts, 240/440 Volt, 3-Phase, 31" x 26" Chamber Size. Approx. 118" x 32" x 67" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

37.Miller Model Radiator-1 Cooling System. Style No. JB-29, 115 volt.
38.Ransome Type Powered Turning Roll Welding Positioner. Dual 18" x 4" Wheels, 60" Max Between Wheel Centers, 3-Phase, Approx. 173" x 40" x 24" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

39.(2) 60" x 60" x 6" Acorn Type Welding table Tops. 1-5/8" Knockouts.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

40.Group of Assorted Acorn Type Hold Downs.
41.Group of 1-1/2" Dia. X 7" Thread Studs.
42.Airco Model 3DDR-24-B 300 Amp Bumblebee Arc Welder. 40 volts, 300 amps @ 60% Duty Cycle, 70 Max OCV, 23.2 KVA, 230/460 volt, 3-Phase, s/n: W532365, Approx. 23" x 34" x 45" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

43.Phoenix Dry Rod Model 9 Type 900 Electrode Stabilizing Oven. 31" x 27" Chamber Size, 100-550 Degree Temperature Range, 2400 Watts, 240/480 Volt, 3-Phase, Approx. 36" x 34"x 36" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

44.Group of 7" L x 1-1/2" Dia. Threaded Studs.
45.P&H Model WP12 Welding Positioner. 16800 Lb Max Capacity, 60" Table Diameter, Foot Switch, 10 hp, 440 volt, 3-Phase, s/n: 2051, Approx. 96" x 108" x 94" H Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

46.Ransome Size no. 3B2-PR Powered Turning Roll Welding Positioner. (1) Drive Unit, (1) Idler Unit, 60-Ton Turning Capacity, 5.7 to 57 Inches per Minute Roller Surface Speed Range, 20" Dia. X 7" Wheels, Approx. 26" Between Inner Wheel Centers, Approx. 80" Max Between Outer Wheel Centers, 440 VOlt, 3-Phase, s/n: 796 422, 130" x 38" x 52" (Drive Unit) and 106" x 38" x 52" (Idler Unit).

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

47.20-1/2" x 20-1/2" x 14" Crate of 2-1/4" and 1-7/8" OD Nuts.
48.Acorn Type Welding Table with 60" x 60" x 5" Top Plate, 1-3/4" Knockouts. 62" x 62" x 34" Overall. (Sold as Shown in Pics)

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

49.Group of 7/8" Dia. And 1" Dia. Threaded Studs. Lengths up to 14-1/2".
50.(2) Turning Roll Welding Positioner Idler Units, 19"x 7" Wheels, Approx. 72" Max Between Wheel Centers, 100" x 31" x 24" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

51.Miller Model CP-250TS Mig Welder, 35 Volts, 250 Amps @ 100% Duty Cycle, 44 Max OCV, 11.9 KVA, Foot Pedal, Gun, 208/230/460 Volt, 3-Phase, s/n: HG036130, Approx. 23" x 50" x 38" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

52.Miller Model Radiator-1 Cooling System. Style No. JB-29, 115 volt.
53.Queen City Machine Tool Model 15-B Double End Belt Grinder. 3" Belt Width, 5 hp, 220/440 volt, 3-Phase, s/n: 290990, Approx. 58" x 58" x 62".

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

54.Phoenix Dry Rod Model 12 Type 300 Electrode Stablilizing Oven. 18" dia. X 20" Chamber Dimensions, 100-500 Degree Temperature Range, 1000 Watts, 120 volt, 24" x 30" x 52" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigg

55.M.K. Products Inc. Model 150-003 Cobramatic Wire Feeder, 115 volt, s/n: 35412.
56.Aronson Model Unknown Powered Turning Roll Welding Positioner. (1) Drive Unit, (1) Idler Unit. 12" Dia. X 3-1/2" Wheels, Adjustable Width with up to Approx. 62" Max Between Wheel Centers, 1 hp, 1-Phase, 106" x 28" x 30" (Drive Unit) and 96" x 28" x 30" (Idler Unit).

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

57.60" x 60" x 6" Acorn Type Welding Table. Approx. 1-3/4" Knockouts.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

58.Tweco TC900 Chiller.
59.Miller Model SRH-333 DC Arc Welding Machine. 32 Volt, 300 Amps @ 60% Duty Cycle, 75 Max OCV, 230/460 Volt, 3-Phase, s/n: 70-545679, Approx. 34" x 37" x 36" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

60.Airco Model PA-3A 300 Amp DC Pulsed Arc Welding Machine. 30 Volts, 300 Amps @ 100% Duty Cycle. 48 Max OCV, 80 Max Pulse Peak Volts, 20 KVA @ 50% Pulse Width, Cart Mounted, 208/230/460 volt, 3-Phase, s/n: HJ125431, Approx. 20" x 48" x 42" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

61.(2) Tunring Roll Welding Positioner Idler Units. 19" x 7" Wheels, Approx. 66" Max Between Wheel Centers, 100" x 32" x 36" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

62.Group of Assorted Acorn Type Hold Downs.
63.Cincinnati No. 3 Vertical Milling Machine. 62" x 15" T-Slotted Table, 50 Taper Spindle, s/n: 4A3PIL-255, Approx. 84" x 100" x 77".

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

64.Stephen Bader Co. 3" Belt Grinder, 1/2 hp, 230/460 volt, 3-Phase, 88" x 24" x 62" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

65.Aronson Model AH-13 Powered Turning Roll Welding positioner Drive Unit. Dual 3-1/2" x 12" Wheels, Approx. 62" Max Between Wheel Centers, Foot Switch, 1 hp Drive Motor, 440 volt, 3-Phase, 107" x 29" x 30" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

66.Airco Model PA-3A 300 Amp DC Pulsed Arc Welding Machine. 30 Volts, 300 Amps @ 100% Duty Cycle. 48 Max OCV, 80 Max Pulse Peak Volts, 20 KVA @ 50% Pulse Width, Cart Mounted, 208/230/460 volt, 3-Phase, s/n: HJ145415, Approx. 20" x 48" x 42" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

67.(6) 117" x 19" Ladder Planks.
68.(2) 183" x 20" Aluminum Ladder Planks.
69.(8) Assorted Acorn Type Hold Downs.
70.M.K. Products Inc. Model 150-003 Cobramatic Wire Feeder, 115 volt, s/n: N36390.
71.Ransome Type Turning Roll Welding Positioner Idler Unit. 12" x 18-1/2" Wheels, Approx. 19" Minimum to 40" Maximum Between Wheel Centers, 60" x 19" x 20" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

72.Thermal Arc Model PAK44 Plasma Power Supply, 400 Amps, 100 Volts, 200 Max OCV, 230/460 Volt, 3-Phase, s/n: 002312A176833B, Approx. 28" x 64" x 40" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

73.The Lima Electric Motor Co. Double End Belt Grinder. 3" belt Width, 5 hp, 240/460 volt, 3-Phase, 1800 rpm, 59" x 60" x 53" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

74.MG Cecil Model CECX20075B-2-1305 Control Console. s/n: 3833. UEC-8 Control. 30" x 24" x 55" Overall.
75.(8) Assorted Acorn Type Hold Downs.
76.Ransome Model Unknown Powered Turning Roll Welding Positioner Drive Unit. 16" Dia. X 5" Rubber Wheels, 30" Between Wheel Centers as Shown, Approx. 55" max Between Wheel Centers, Foot Switch, 1 hp, 230/460 Volt, 3-Phase, Approx. 92" x 30" x 22" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

77.(2) Ransome Turning Roll Welding Positioner Idler Units. 16" dia. X 5" Wheels, Approx. 55" Max Between Wheel Centers, 77" x 10" x 21" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

78.60" x 60" x 6" Acorn Type Welding Table. Approx. 1-3/4" Knockouts.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

79.Ransome Type Turning Roll Welding Positioner Idler Unit. 19" x 7-1/2" Inner Wheels with Approx. 81" Max Between Wheel Centers, 17" x 7-1/2" Outer Wheels with Approx. 140" Max Between Wheels, 216" x 25" x 47" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

80.Phoenix Dry Rod Model 1 Type 10B Electrode Stabilizing Oven, 3" Dia. X 19-1/2" Chamber, 300 Degree Max Temperature, 120 Volt.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

81.Airco Model 3DDR-24-B(S) 300 Amp Bumblebee Arc Welder. 40 volts, 300 amps @ 60% Duty Cycle, 70 Max OCV, 23.2 KVA, 230/460 volt, 3-Phase, s/n: 71-589236, Approx. 23" x 34" x 45" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

82.Weldcraft Chiller.
83.Aronson Model SHD30A Welding Positioner. 36" x 36" Table with Custom Adjustable Chucking Fixture, 36000 Lb/in Rotational, 56250 Lb/In Tilt Max Torque Load, Foot Pedal, 440 volt, 3-Phase, s/n: 77436, Approx. 54" x 64" x 60" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.

85.Crate of Assorted Used Welding Guns, Lead Wires, Foot Switches and More. (Crate Included)
86.Small Acetylene Torch Tank with Cutting Head, Regulator.
87.(8) Assorted Acorn Type Hold Downs.
88.Crate of Assorted Wire, Foot Switches and More. (Crate Included)
89.(5) Assorted Grinding Wheels, (3) 16 x 1 x 6 and (2) 10 x 1 x 3.
90.Airco Model 3DDR-24-B(S) 300 Amp Bumblebee Arc Welder. 40 volts, 300 amps @ 60% Duty Cycle, 70 Max OCV, 23.2 KVA, 230/460 volt, 3-Phase, s/n: NA, Approx. 23" x 34" x 45" Overall.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763)784-2365 for more information.




Auctioneer License Information: MN #27-49

    Auction Listings provided by AuctionZip.com. Although the information published herein is from sources deemed reliable, AuctionZip.com expressly disclaims any liability for errors, omissions or changes regarding any information provided for this auction. Potential buyers are urged to verify auction date, time, and content directly through the auctioneer's website or by contacting the auctioneer directly. The terms and conditions of the auction may or may not be published in this listing. ALL TERMS AND CONDITIONS AND OTHER ANNOUNCEMENTS MADE THE DAY OF THE AUCTION ARE BINDING AND TAKE PRECEDENCE OVER ANY INFORMATION FOUND HEREIN.